10.2.22 PHYSICAL CHANNEL RECONFIGURATION
25.3313GPPProtocol specificationRadio Resource Control (RRC)Release 17TS
This message is used by UTRAN to assign, replace or release a set of physical channels used by a UE.
RLC-SAP: AM or UM
Logical channel: DCCH
Direction: UTRAN UE
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
Message Type |
MP |
Message Type |
|||
|
UE Information Elements |
|||||
|
RRC transaction identifier |
MP |
RRC transaction identifier 10.3.3.36 |
|||
|
Integrity check info |
CH |
Integrity check info 10.3.3.16 |
|||
|
Integrity protection mode info |
OP |
Integrity protection mode info 10.3.3.19 |
The UTRAN should not include this IE unless it is performing an SRNS relocation |
||
|
Ciphering mode info |
OP |
Ciphering mode info 10.3.3.5 |
The UTRAN should not include this IE unless it is performing an SRNS relocation and a change in ciphering algorithm |
||
|
Activation time |
MD |
Activation time 10.3.3.1 |
Default value is "now" |
||
|
Dynamic activation time |
OP |
Dynamic activation time 10.3.3.1a |
REL-13 |
||
|
Delay restriction flag |
OP |
Enumerated (TRUE) |
This IE is always set to TRUE and included if the activation time is restricted according to subclause 8.6.3.1 |
REL-6 |
|
|
New U-RNTI |
OP |
U-RNTI 10.3.3.47 |
|||
|
New C-RNTI |
OP |
C-RNTI 10.3.3.8 |
|||
|
New DSCH-RNTI |
OP |
DSCH-RNTI 10.3.3.9a |
Should not be set in FDD. If received the UE behaviour is unspecified. |
||
|
New H-RNTI |
OP |
H-RNTI 10.3.3.14a |
REL-5 |
||
|
New Primary E-RNTI |
OP |
E-RNTI 10.3.3.10a |
REL-6 |
||
|
New Secondary E-RNTI |
OP |
E-RNTI 10.3.3.10a |
FDD only |
REL-6 |
|
|
RRC State Indicator |
MP |
RRC State Indicator 10.3.3.35a |
|||
|
UE Mobility State Indicator |
CV-FACH_PCH |
Enumerated (High-mobilityDetected) |
Absence of this IE implies that, according to [4], the UE shall consider itself being in the mobility state the UE has maintained in CELL_DCH state or being not in high mobility state after the state transition, if applicable. |
REL-7 |
|
|
UTRAN DRX cycle length coefficient |
OP |
UTRAN DRX cycle length coefficient 10.3.3.49 |
|||
|
CN Information Elements |
|||||
|
CN Information info |
OP |
CN Information info 10.3.1.3 |
|||
|
UTRAN mobility information elements |
|||||
|
URA identity |
OP |
URA identity 10.3.2.6 |
|||
|
RNC support for change of UE capability |
OP |
Boolean |
Should be included if the message is used to perform an SRNS relocation |
REL-7 |
|
|
Reconfiguration in response to requested change of UE capability |
OP |
Enumerated (TRUE) |
REL-7 |
||
|
RB information elements |
|||||
|
Downlink counter synchronisation info |
OP |
||||
|
>RB with PDCP information list |
OP |
1 to <maxRBallRABs> |
|||
|
>>RB with PDCP information |
MP |
RB with PDCP information 10.3.4.22 |
This IE is needed for each RB having PDCP in the case of lossless SRNS relocation |
||
|
OP |
REL-5 |
||||
|
>>PDCP context relocation info |
OP |
PDCP context relocation info 10.3.4.1a |
This IE is needed for each RB having PDCP and performing PDCP context relocation |
REL-5 |
|
|
Retrievable configuration |
|||||
|
Retrievable configuration info |
OP |
Retrievable configuration info 10.3.8.25 |
REL-13 |
||
|
Downlink transport channels |
REL-8 |
||||
|
HARQ Info |
OP |
HARQ info 10.3.5.7a |
REL-7 |
||
|
PhyCH information elements |
|||||
|
Frequency info |
OP |
Frequency info 10.3.6.36 |
|||
|
Multi-frequency Info |
OP |
Multi-frequency Info 10.3.6.39a |
This IE is used for 1.28 Mcps TDD only |
REL-7 |
|
|
DTX-DRX timing information |
OP |
DTX-DRX timing information 10.3.6.34b |
REL-7 |
||
|
DTX-DRX Information |
OP |
DTX-DRX Information 10.3.6.34a |
REL-7 |
||
|
HS-SCCH less Information |
OP |
HS-SCCH less Information 10.3.6.36ab |
REL-7 |
||
|
MIMO parameters |
OP |
MIMO parameters 10.3.6.41a |
REL-7 |
||
|
MIMO mode with four transmit antennas parameters |
OP |
MIMO mode with four transmit antennas parameters 10.3.6.142 |
REL-11 |
||
|
DCH Enhancements info FDD |
OP |
DCH Enhancements info FDD 10.3.6.149 |
REL-12 |
||
|
Control Channel DRX information |
OP |
Control Channel DRX information 1.28 Mcps TDD 10.3.6.107 |
This IE is used for 1.28 Mcps TDD only |
REL-8 |
|
|
SPS Information |
OP |
SPS information 1.28 Mcps TDD 10.3.6.110 |
This IE is used for 1.28 Mcps TDD only |
REL-8 |
|
|
MU-MIMO info |
OP |
MU-MIMO info 1.28 Mcps TDD 10.3.6.122 |
This IE is used for 1.28 Mcps TDD only |
REL-10 |
|
|
Non-rectangular resource allocation indicator |
OP |
Enumerated(TRUE) |
For 1.28 Mcps TDD only. The absence of this IE indicates that the non-rectangular resource allocation is not used. |
REL-12 |
|
|
Non-rectangular resource specific timeslots set |
CV-Non-rectangularResourceAllocation |
Bit string (7) |
For 1.28 Mcps TDD only. The value 1 of a bit indicates the corresponding timeslot in which the channelization codes are assigned physical control channel. The value 0 of a bit indicates the corresponding timeslot in which all channelization codes are assigned when the timeslot is scheduled to the UE. The first/leftmost bit of the bit string is for TS0. |
REL-12 |
|
|
Uplink radio resources |
|||||
|
Maximum allowed UL TX power |
MD |
Maximum allowed UL TX power 10.3.6.39 |
Default value is the existing value of the maximum allowed UL TX power |
||
|
Uplink DPCH info |
OP |
Uplink DPCH info 10.3.6.88 |
|||
|
E-DCH Info |
OP |
E-DCH Info 10.3.6.97 |
REL-6 |
||
|
Uplink secondary cell info FDD |
OP |
Uplink secondary cell info FDD 10.3.6.115 |
FDD only |
REL-9 |
|
|
Multi-carrier E-DCH Info for LCR TDD |
OP |
Multi-carrier E-DCH Info for LCR TDD 10.3.6.97a |
1.28Mcps TDD only |
REL-10 |
|
|
Uplink CLTD info FDD |
OP |
Uplink CLTD info FDD 10.3.6.125 |
FDD only |
REL-11 |
|
|
Uplink OLTD info FDD |
OP |
Uplink OLTD info FDD 10.3.6.126 |
FDD only |
REL-11 |
|
|
Downlink radio resources |
|||||
|
Downlink HS-PDSCH Information |
OP |
Downlink HS_PDSCH Information 10.3.6.23a |
REL-5 |
||
|
Downlink information common for all radio links |
OP |
Downlink information common for all radio links 10.3.6.24 |
|||
|
Downlink information per radio link list |
OP |
1 to <maxRL> |
Send downlink information for each radio link |
||
|
>Downlink information for each radio link |
MP |
Downlink information for each radio link 10.3.6.27 |
|||
|
Downlink secondary cell info FDD |
OP |
Downlink secondary cell info FDD 10.3.6.31a |
FDD only |
REL-8 |
|
|
Additional downlink secondary cell info list FDD |
OP |
2 |
REL-10 |
||
|
>Downlink secondary cell info FDD |
OP |
Downlink secondary cell info FDD 10.3.6.31a |
FDD only |
REL-10 |
|
|
Additional downlink secondary cell info list FDD 2 |
OP |
4 |
REL-11 |
||
|
>Downlink secondary cell info FDD |
OP |
Downlink secondary cell info FDD 10.3.6.31a |
FDD only |
REL-11 |
|
|
Common E-RGCH info FDD |
OP |
Common E-RGCH info FDD 10.3.6.138 |
FDD only |
REL-11 |
|
|
DPCCH2 info FDD |
OP |
DPCCH2 info FDD 10.3.6.148 |
FDD only |
REL-12 |
|
|
MBMS PL Service Restriction Information |
OP |
Enumerated (TRUE) |
REL-6 |
||
|
CELL_DCH measurement occasion info LCR |
OP |
CELL_DCH measurement occasion info LCR 10.3.7.126 |
REL-9 |
|
Condition |
Explanation |
|
FACH_PCH |
This IE is mandatory default when a transition from CELL_DCH to CELL_FACH, URA_PCH or CELL_PCH is requested by the message and is not needed otherwise. |
|
Non-rectangularResourceAllocation |
This IE is optionally present if non-rectangular resource allocation is configured. Otherwise, it is not needed. |