10.2.1 ACTIVE SET UPDATE
25.3313GPPProtocol specificationRadio Resource Control (RRC)Release 17TS
NOTE: Only for FDD.
This message is used by UTRAN to add, replace or delete radio links in the active set of the UE.
RLC-SAP: AM or UM
Logical channel: DCCH
Direction: UTRAN UE
|
Information Element/Group name |
Need |
Multi |
Type and reference |
Semantics description |
Version |
|---|---|---|---|---|---|
|
Message Type |
MP |
Message Type |
|||
|
UE information elements |
|||||
|
RRC transaction identifier |
MP |
RRC transaction identifier 10.3.3.36 |
|||
|
Integrity check info |
CH |
Integrity check info 10.3.3.16 |
|||
|
Activation time |
MD |
Activation time 10.3.3.1 |
Default value is "now". |
||
|
Dynamic activation time |
OP |
Dynamic activation time 10.3.3.1a |
REL-13 |
||
|
New U-RNTI |
OP |
U-RNTI 10.3.3.47 |
|||
|
New H-RNTI |
OP |
H-RNTI 10.3.3.14a |
REL-6 |
||
|
New Primary E-RNTI |
OP |
E-RNTI 10.3.3.10a |
REL-6 |
||
|
New Secondary E-RNTI |
OP |
E-RNTI 10.3.3.10a |
REL-6 |
||
|
CN information elements |
|||||
|
CN Information info |
OP |
CN Information info 10.3.1.3 |
|||
|
Phy CH information elements |
|||||
|
DTX-DRX timing information |
OP |
DTX-DRX timing information 10.3.6.34b |
REL-7 |
||
|
DTX-DRX Information |
OP |
DTX-DRX Information 10.3.6.34a |
REL-7 |
||
|
HS-SCCH less Information |
OP |
HS-SCCH less Information 10.3.6.36ab |
REL-7 |
||
|
MIMO parameters |
OP |
MIMO parameters 10.3.6.41a |
REL-7 |
||
|
MIMO mode with four transmit antennas parameters |
OP |
MIMO mode with four transmit antennas parameters 10.3.6.142 |
REL-11 |
||
|
DCH Enhancements info FDD |
OP |
DCH Enhancements info FDD 10.3.6.149 |
REL-12 |
||
|
Uplink radio resources |
|||||
|
Maximum allowed UL TX power |
MD |
Maximum allowed UL TX power 10.3.6.39 |
Default value is the existing "maximum UL TX power. |
||
|
Uplink secondary cell info FDD |
OP |
Uplink secondary cell info FDD 10.3.6.115 |
FDD only |
REL-9 |
|
|
E-DCH reconfiguration information on secondary UL frequency |
OP |
E-DCH reconfiguration information on secondary UL frequency 10.3.6.121 |
FDD only |
REL-9 |
|
|
Uplink CLTD info FDD |
OP |
Uplink CLTD info FDD 10.3.6.125 |
FDD only |
REL-11 |
|
|
F-TPICH reconfiguration info |
OP |
F-TPICH reconfiguration info 10.3.6.128 |
FDD only |
REL-11 |
|
|
Uplink OLTD info FDD |
OP |
Uplink OLTD info FDD 10.3.6.126 |
FDD only |
REL-11 |
|
|
Downlink radio resources |
|||||
|
Radio link addition information |
OP |
1 to <maxRL-1> |
Radio link addition information required for each RL to add |
||
|
>Radio link addition information |
MP |
Radio link addition information 10.3.6.68 |
|||
|
Radio link addition information on secondary UL frequency |
OP |
Radio link addition information on secondary UL frequency 10.3.6.119 |
FDD only |
REL-9 |
|
|
Serving Cell Change Parameters |
CV-TargetCellPreconf |
Serving Cell Change Parameters 10.3.6.74b |
REL-8 |
||
|
Radio link removal information |
OP |
1 to <maxRL> |
Radio link removal information required for each RL to remove |
||
|
>Radio link removal information |
MP |
Radio link removal information 10.3.6.69 |
|||
|
Radio link removal information on secondary UL frequency |
OP |
Radio link removal information on secondary UL frequency 10.3.6.120 |
FDD only |
REL-9 |
|
|
TX Diversity Mode |
MD |
TX Diversity Mode 10.3.6.86 |
Default value is the TX diversity mode currently used in all or part of the active set. |
||
|
DPC Mode |
OP |
Enumerated (Single TPC, TPC triplet in soft) |
"Single TPC" is DPC_Mode=0 and "TPC triplet in soft" is DPC_mode=1 in [29]. |
REL-5 |
|
|
Serving HS-DSCH cell information |
OP |
Serving HS-DSCH cell information 10.3.6.74a |
REL-6 |
||
|
E-DCH reconfiguration information |
OP |
E-DCH reconfiguration information 10.3.6.69a |
REL-6 |
||
|
UL 16QAM configuration |
OP |
UL 16QAM configuration 10.3.6.86o |
REL-7 |
||
|
UL 64QAM configuration |
OP |
UL 64QAM configuration 10.3.6.86b |
REL-11 |
||
|
Uplink MIMO info FDD |
OP |
Uplink MIMO info FDD 10.3.6.145 |
FDD only |
REL-11 |
|
|
E-DCH reconfiguration information same serving cell |
OP |
E-DCH reconfiguration information same serving cell 10.3.6.69b |
This IE is not present if the serving E-DCH cell is changed with this message. |
REL-7 |
|
|
E-TFC Boost Info |
OP |
E-TFC Boost Info 10.3.6.106 |
Absence of this IE means that boosting of E-DPCCH is disabled |
REL-7 |
|
|
E-DPDCH power interpolation |
OP |
Boolean |
TRUE means E-DPDCH power interpolation formula is used, FALSE means E-DPDCH power extrapolation formula is used for the computation of the gain factor ed according to [29]. Absence of this IE means that E-DPDCH power extrapolation formula is used for the computation of the gain factor ed according to [29]. |
REL-7 |
|
|
Downlink secondary cell info FDD |
OP |
Downlink secondary cell info FDD 10.3.6.31a |
FDD only |
REL-8 |
|
|
Additional downlink secondary cell info list FDD |
OP |
2 |
REL-10 |
||
|
>Downlink secondary cell info FDD |
OP |
Downlink secondary cell info FDD 10.3.6.31a |
FDD only |
REL-10 |
|
|
Additional downlink secondary cell info list FDD 2 |
OP |
4 |
REL-11 |
||
|
>Downlink secondary cell info FDD |
OP |
Downlink secondary cell info FDD 10.3.6.31a |
FDD only |
REL-11 |
|
|
DPCCH2 info FDD |
OP |
DPCCH2 info FDD 10.3.6.148 |
FDD only |
REL-12 |
|
Condition |
Explanation |
|
TargetCellPreconf |
This IE is mandatory present if Radio Links are added and at least one added Radio Link contains the IE Target cell preconfiguration. |