D.5 Multi-path fading propagation conditions for E‑DPDCH and E-DPCCH
25.1413GPPBase Station (BS) conformance testing (FDD)Release 17TS
Table D.3 shows propagation conditions that are used for E-DPDCH and E-DPCCH performance measurements in multi-path fading environment. For DC-HSUPA and DB-DC-HSUPA requirements, the fading of the signals for each cell shall be independent.
Table D.3: Propagation Conditions for Multipath Fading Environments for E-DPDCH and E-DPCCH Performance Requirements
ITU Pedestrian A Speed 3km/h (PA3) |
ITU Pedestrian B Speed 3km/h (PB3) |
ITU vehicular A Speed 30km/h (VA30) |
ITU vehicular A Speed 120km/h (VA120) |
||||||||
Speed for Band I, II, III, IV, IX, X, XXV |
Speed for Band I, II, III, IV, IX, X, XXV |
Speed for Band I, II, III, IV, IX, X, XXV |
Speed for Band I, II, III, IV, IX, X, XXV |
||||||||
Speed for Band V, VI, VIII, XIX, XX, XXVI |
Speed for Band V, VI, VIII, XIX, XX, XXVI |
Speed for Band V, VI, VIII, XIX, XX, XXVI |
Speed for Band V, VI, VIII, XIX, XX, XXVI |
||||||||
Speed for Band VII |
Speed for Band VII |
Speed for Band VII |
Speed for Band VII |
||||||||
Speed for Band XI, XXI 4.1 km/h |
Speed for Band XI, XXI 4.1 km/h |
Speed for Band XI, XXI |
Speed for Band XI, XXI |
||||||||
Speed for Band XII, XIII, XIV 8 km/h |
Speed for Band XII, XIII, XIV 8 km/h |
Speed for Band XII, XIII, XIV 80 km/h |
Speed for Band XII, XIII, XIV 320 km/h |
||||||||
Speed for Band XXII: |
Speed for Band XXII: |
Speed for Band XXII: |
Speed for Band XXII: |
||||||||
Relative Delay [ns] |
Relative Mean Power [ dB] |
Relative Delay [ns] |
Relative Mean Power [ dB] |
Relative Delay [ns] |
Relative Mean Power [ dB] |
Relative Delay [ns] |
Relative Mean Power [ dB] |
||||
0 |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
||||
110 |
-9.7 |
200 |
-0.9 |
310 |
-1.0 |
310 |
-1.0 |
||||
190 |
-19.2 |
800 |
-4.9 |
710 |
-9.0 |
710 |
-9.0 |
||||
410 |
-22.8 |
1200 |
-8.0 |
1090 |
-10.0 |
1090 |
-10.0 |
||||
2300 |
-7.8 |
1730 |
-15.0 |
1730 |
-15.0 |
||||||
3700 |
-23.9 |
2510 |
-20.0 |
2510 |
-20.0 |
NOTE 1: Speed above 120km/h is applicable to demodulation performance requirements only.
Annex E (normative):
Global In-Channel TX-Test