A.1 Summary of UL reference measurement channels
25.1413GPPBase Station (BS) conformance testing (FDD)Release 17TS
The parameters for the UL reference measurement channels are specified in Table A.1 and the channel coding is detailed in figure A.2 through A.6 respectively.
NOTE: For all cases, one DPCCH shall be attached to DPDCH(s).
Table A.1: Reference measuremet channels for UL DCH
|
Parameter |
DCH for DTCH / DCH for DCCH |
Unit |
||||
|
DPDCH |
Information bit rate |
12,2/2,4 |
64/2,4 |
144/2,4 |
384/2,4 |
kbps |
|
Physical channel |
60/15 |
240/15 |
480/15 |
960/15 |
kbps |
|
|
Spreading factor |
64 |
16 |
8 |
4 |
||
|
Repetition rate |
22/22 |
19/19 |
8/9 |
-18/-17 |
% |
|
|
Interleaving |
20 |
40 |
40 |
40 |
ms |
|
|
Number of DPDCHs |
1 |
1 |
1 |
1 |
||
|
DPCCH |
Dedicated pilot |
6 |
bit/slot |
|||
|
Power control |
2 |
bit/slot |
||||
|
TFCI |
2 |
bit/slot |
||||
|
FBI |
0 / 2 |
bit/slot |
||||
|
Spreading factor |
256 |
|||||
|
Power ratio of DPCCH/DPDCH |
-2,69 |
-5,46 |
-9,54 |
-9,54 |
dB |
|
|
Amplitude ratio of DPCCH/DPDCH |
0,7333 |
0,5333 |
0,3333 |
0,3333 |
||
|
Note: Combination of TFCI bit of 0 bit/slot and FBI bit of 2 bit /slot is applied in test of Site Selection Diversity Transmission specified in 8.10. |
||||||