B.1 Transmitter

25.1413GPPBase Station (BS) conformance testing (FDD)Release 17TS

B.1.1 Maximum output power, total power dynamic range

Figure B.1: Measuring system Set-up for maximum output power, total power dynamic range

B.1.2 Frequency, Code Power and Transmit Modulation

Figure B.2: Measurement system set up for RF frequency, several code power tests and transmit modulation (EVM, RCDE and PCDE)

Figure B.2A: Measurement system set-up for S-CPICH power offset accuracy. For MIMO mode with two antennas the components surrounded by the dashed line do not exist.

B.1.3 Power control steps and power control dynamic range

Figure B.3: Measuring system Set-up for power control steps and power
control dynamic range measurements

B.1.4 Out of band emission

Figure B.4: Measuring system Set-up for Out of band emission measurements

B.1.5 Transmit intermodulation

Figure B.5: Measuring system Set-up for Base Station Transmit Intermodulation Tests

B.1.6 Time alignment error in TX diversity, MIMO, DC-HSDPA, DB-DC-HSDPA and 4C-HSDPA

Figure B.6: Measuring system set-up for time alignment error in TX diversity, MIMO, DC-HSDPA and DB-DC-HSDPA transmission (one of Tx1 or Tx2 may not be used for DC-HSDPA or 4C-HSDPA)

B.1.7 Home BS output power for adjacent channel protection

Figure B.7: Measuring system set-up for Home BS output power for adjacent channel protection