5 Additional Information stored in network entities

23.0973GPPMultiple Subscriber Profile (MSP) Phase 2Release 17Stage 2TS

5.1 Data stored in the HLR

The HLR contains all the common data (the data valid for all profiles) and some data specific to the default profile.

The data stored in the HLR are defined in 3G TS 23.008. The elements specifically used for MSP are:

– list of MSISDNs and associated Bearer Capabilities for each profile;

– default profile (associated with the Basic MSISDN);

– capabilities of VLR (support of CAMEL Phase 2 and 3);

– supplementary services (per BSG) provisioned per subscriber (CW, CH, MPTY,…);

– Call Barring Data (see clause 7.6.8: Call Barring);

– ODB Data (see clause 7.7.5: Operator Determined Barring);

– HOLD Data (see clause 7.8.2: Call Hold);

– ECT Data (see clause 7.8.9: Explicit Call Transfer);

– MPTY Data (see clause 7.8.5: Multi Party);

– CCBS Data (see clause 7.8.10: Completion of Calls to Busy Subscriber);

– CW Data (see clause 7.8.3: Call Waiting);

– CLIR Data (see clause 7.8.1.2);

– CAMEL data including the MSP service key, O-CSI, T-CSI, VT-CSI, UG-CSI, SS-CSI and Location information / Subscriber state Interrogation.

The data stored in a VLR are defined in 3G TS 23.008. MSP has no impact on the VLR.