G.5.4 Test time for PSSCH performance requirements with throughput
38.521-43GPPNRPart 4: PerformanceRadio transmission and receptionRelease 17TSUser Equipment (UE) conformance specification
The throughput requirements are tested in terms of PSSCH BLER. The maximum BLER requirement for all tests is 10%. The tests are performed in a variety of AWGN and fading propagation models. For each test in Table G.5.4-1 the test time (in subframes) is to be applied to the test method described in section G.5.2
Table G.5.4-1: Minimum test time for PSSCH performance requirements with throughput
|
Test num. |
Performance Scenario |
Minimum Number of Active Subframes (MNAS) |
Minimum Number of Subframes (MNS)(Note 1) |
Test Time in Subframes |
|
11.1.2-1 |
R.PSSCH.2-1.1 1×2 Low TDLA30-2700 |
FFS |
FFS |
FFS |
|
11.1.2-2 |
R.PSSCH.2-1.2 1×2 Low TDLA30-1400 |
FFS |
FFS |
FFS |
|
11.1.2-3 |
R.PSSCH.2-1.3 1×2 Low TDLA30-180 |
FFS |
FFS |
FFS |
|
11.1.6-1 |
R.PSSCH.2-1.4 1×2 Low AWGN 2 PSSCH transmissions |
FFS |
FFS |
FFS |
|
11.1.7-1 |
R.PSSCH.2-1.5 1×2 Low AWGN Number of PSSCH transmissions depends on UE capability |
FFS |
FFS |
FFS |
|
Note 1: The Minimum Number of Subframes is the total minimum number of subframes (active and inactive) required for this demodulation scenario and is derived from the MNAS, according to the resource pool configuration defined for each test case. Note 2: The Test Time is based on the Minimum Number of Subframes (MNS) according to the formula: |
||||