C.2 Connection
38.521-43GPPNRPart 4: PerformanceRadio transmission and receptionRelease 17TSUser Equipment (UE) conformance specification
C.2.1 FR1 Measurement of Performance Characteristics
Unless otherwise stated, Table C.2.1-1 is applicable for measurements in which uniform RS-to-EPRE boosting for all downlink physical channels is used.
Table C.2.1-1: Downlink Physical Channels transmitted during a connection (FDD and TDD) for FR1
|
Parameter |
Unit |
Value (NOTE 2) |
|
SSS transmit power |
W |
Test specific |
|
EPRE ratio of PSS to SSS |
dB |
0 |
|
EPRE ratio of PBCH to SSS |
dB |
0 |
|
EPRE ratio of PBCH to PBCH DMRS |
dB |
0 |
|
EPRE ratio of PDCCH to SSS |
dB |
0 |
|
EPRE ratio of PDCCH to PDCCH DMRS |
dB |
0 |
|
EPRE ratio of PDSCH to SSS |
dB |
0 |
|
EPRE ratio of PDSCH to PDSCH DMRS |
dB |
Test specific (Note 1) |
|
EPRE ratio of NZP CSI-RS to SSS |
dB |
-10*log10(L) (Note 3) |
|
EPRE ratio of PDSCH OCNG to SSS |
dB |
0 |
|
EPRE ratio of PDCCH OCNG to SSS |
dB |
0 |
|
EPRE ratio of LTE CRS to NR SSS |
dB |
0 (Note 4) |
|
NOTE 1: Value is derived from Table 4.1-1 in TS 38.214 [X] based on “Number of DM-RS CDM groups without data” and “DMRS Type” parameters specified for each test. NOTE 2: The value is the energy of per RE for a single antenna port before pre-coding. NOTE 3: NOTE 4: It is only applicable to LTE-NR coexistence tests. |
||
is the CDM group size of NZP CSI-RS specified for each test.C.2.2 FR2 Measurement of Performance Characteristics
Unless otherwise stated, Table C.2.2-1 is applicable for measurements on the Performance Characteristics.
Table C.2.2-1: Downlink Physical Channels transmitted during a connection (TDD) for FR2
|
Parameter |
Unit |
Value (Note 2) |
|
SSS transmit power |
W |
Test specific |
|
EPRE ratio of PSS to SSS |
dB |
0 |
|
EPRE ratio of PBCH to SSS |
dB |
0 |
|
EPRE ratio of PBCH to PBCH DMRS |
dB |
0 |
|
EPRE ratio of PDCCH to SSS |
dB |
0 |
|
EPRE ratio of PDCCH to PDCCH DMRS |
dB |
0 |
|
EPRE ratio of PDSCH to SSS |
dB |
0 |
|
EPRE ratio of PDSCH to PDSCH DMRS |
dB |
Test specific (Note 1) |
|
EPRE ratio of NZP CSI-RS to SSS |
dB |
-10*log10(L) (Note 3) |
|
EPRE ratio of PTRS to PDSCH |
dB |
Test specific (Note 4) |
|
EPRE ratio of PDSCH OCNG to SSS |
dB |
0 |
|
EPRE ratio of PDCCH OCNG to SSS |
dB |
0 |
|
Note 1: Value is derived from Table 4.1-1 in TS 38.214 [12] based on "Number of DM-RS CDM groups without data" and "DMRS Type" parameters specified for each test Note 2: The value is the energy of per RE for a single antenna port before pre-coding. Note 3: Note 4: Value is derived from Table 4.1-2 in TS 38.214 [12] based on “The number of PDSCH layers” and “epre-Ratio” parameters specified for each test. |
||
is the CDM group size of NZP CSI-RS specified for each test.Annex D (normative):
E-UTRA link setup config for NSA testing