Foreword1 Scope2 References3 Definitions of terms, symbols and abbreviations4 General test conditions and declarations5 Operating bands and channel arrangement6 Conducted transmitter characteristics7 Conducted receiver characteristics8 Conducted performance characteristics9 Radiated transmitter characteristics10 Radiated receiver characteristic11 Radiated performance requirementsA.1 Fixed Reference Channels for RF Rx requirement (QPSK, R=1/3)A.2 Fixed Reference Channels for dynamic range (16QAM, R=2/3)A.3 Fixed Reference Channels for performance requirementsA.4 PRACH test parametersB.1 GeneralB.2 Normal test environmentB.3 Extreme test environmentB.4 VibrationB.5 Power supplyB.6 Measurement of test environmentB.7 OTA extreme test methodC.1 Measurement of transmitterC.2 Measurement of ReceiverC.3 measurement of performance requirements 8 Conducted performance characteristics 38.1813GPPNRRelease 17Satellite Access Node conformance testingTS Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM 8.1 General 8.2 Performance requirements for PUSCH 8.3 Performance requirements for PUCCH 8.4 Performance requirements for PRACH