Skip to content
TechSpec
  • Foreword
  • 1 Scope
  • 2 References
  • 3 Definitions of terms, symbols and abbreviations
  • 4 General test conditions and declarations
  • 5 Operating bands and channel arrangement
  • 6 Conducted transmitter characteristics
  • 7 Conducted receiver characteristics
  • 8 Conducted performance characteristics
  • 9 Radiated transmitter characteristics
  • 10 Radiated receiver characteristic
  • 11 Radiated performance requirements
  • A.1 Fixed Reference Channels for RF Rx requirement (QPSK, R=1/3)
  • A.2 Fixed Reference Channels for dynamic range (16QAM, R=2/3)
  • A.3 Fixed Reference Channels for performance requirements
  • A.4 PRACH test parameters
  • B.1 General
  • B.2 Normal test environment
  • B.3 Extreme test environment
  • B.4 Vibration
  • B.5 Power supply
  • B.6 Measurement of test environment
  • B.7 OTA extreme test method
  • C.1 Measurement of transmitter
  • C.2 Measurement of Receiver
  • C.3 measurement of performance requirements

9 Radiated transmitter characteristics

38.1813GPPNRRelease 17Satellite Access Node conformance testingTS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

9.1 General

9.2 Radiated transmit power

9.3 OTA base station output power

9.4 OTA output power dynamics

9.5 OTA transmit ON/OFF power

The requirement is not applicable in this version of the specification.

9.6 OTA transmitted signal quality

9.7 OTA unwanted emissions

9.8 OTA transmitter intermodulation

The requirement is not applicable in this version of the specification.