Skip to content
TechSpec
  • Foreword
  • 1 Scope
  • 2 References
  • 3 Definitions of terms, symbols and abbreviations
  • 4 General test conditions and declarations
  • 5 Operating bands and channel arrangement
  • 6 Conducted transmitter characteristics
  • 7 Conducted receiver characteristics
  • 8 Conducted performance characteristics
  • 9 Radiated transmitter characteristics
  • 10 Radiated receiver characteristic
  • 11 Radiated performance requirements
  • A.1 Fixed Reference Channels for RF Rx requirement (QPSK, R=1/3)
  • A.2 Fixed Reference Channels for dynamic range (16QAM, R=2/3)
  • A.3 Fixed Reference Channels for performance requirements
  • A.4 PRACH test parameters
  • B.1 General
  • B.2 Normal test environment
  • B.3 Extreme test environment
  • B.4 Vibration
  • B.5 Power supply
  • B.6 Measurement of test environment
  • B.7 OTA extreme test method
  • C.1 Measurement of transmitter
  • C.2 Measurement of Receiver
  • C.3 measurement of performance requirements

10 Radiated receiver characteristic

38.1813GPPNRRelease 17Satellite Access Node conformance testingTS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

10.1 General

10.2 OTA sensitivity

10.3 OTA reference sensitivity level

10.4 OTA dynamic range

10.5 OTA in-band selectivity and blocking

10.6 OTA out-of-band blocking

10.7 OTA receiver spurious emissions

10.8 OTA receiver intermodulation

The requirement is not applicable in this version of the specification.