H.2 Characteristics of the interfering signals for IAB-MT

38.176-23GPPIntegrated Access and Backhaul (IAB) conformance testingNRPart 2: radiated conformance testingRelease 17TS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

The interfering signal shall be configured with PDSCH and PDCCH containing data and DM-RS symbols. Normal cyclic prefix is used. The data content shall be uncorrelated to the wanted signal and modulated according to clause 7 of TS 38.211 [7]. Mapping of PDSCH modulation to receiver requirement are specified in table E.2-1.

Table E.2-1: Modulation of the interfering signal

Receiver requirement	Modulation
Adjacent channel selectivity and narrow-band blocking	QPSK
General blocking	QPSK
Receiver intermodulation	QPSK

Annex I (normative):
TRP measurement procedures

The Annex I in TS38.141-2[6] applies to IAB.

Annex J (normative):
Propagation conditions