C.2 Measurement of receiver
38.176-23GPPIntegrated Access and Backhaul (IAB) conformance testingNRPart 2: radiated conformance testingRelease 17TS
Table C.2-1: Derivation of test requirements (FR1 OTA receiver tests)
|
Test |
Minimum requirement in TS 38.174 [2] |
Test Tolerance (TTOTA) |
Test requirement in the present document |
|
7.2 OTA sensitivity |
See TS 38.174 [2], clause 10.2 |
1.3 dB, f ≤ 3.0 GHz 1.4 dB, 3.0 GHz < f ≤ 4.2 GHz 1.6 dB, 4.2 GHz < f ≤ 6.0 GHz |
Formula: Declared Minimum EIS + TT |
|
7.3 OTA reference sensitivity level |
See TS 38.174 [2], clause 10.3 |
1.3 dB, f ≤ 3.0 GHz 1.4 dB, 3.0 GHz < f ≤ 4.2 GHz 1.6 dB, 4.2 GHz < f ≤ 6.0 GHz |
Formula: EISREFSENS + TT |
|
7.4 OTA dynamic range |
See TS 38.174 [2], clause 10.4 |
0.3 dB, f ≤ 6 GHz |
Formula: Wanted signal power + TT Interferer signal power unchanged. |
|
7.5.1 OTA adjacent channel selectivity |
See TS 38.174 [2], clause 10.5.1 |
0 dB |
Formula: Wanted signal power + TT Interferer signal power unchanged. |
|
7.5.2 In-band blocking (General) |
See TS 38.174 [2], clause 10.5.2 |
0 dB |
Formula: Wanted signal power + TT Interferer signal power unchanged. |
|
7.5.2 In-band blocking (Narrowband) |
See TS 38.174 [2], clause 10.5.2 |
0 dB |
Formula: Wanted signal power + TT Interferer signal power unchanged. |
|
7.6 OTA out-of-band blocking (General) |
See TS 38.174 [2], clause 10.6 |
0 dB |
Formula: Wanted signal power + TT Interferer signal power unchanged. |
|
7.6 OTA out-of-band blocking (Co-location) |
See TS 38.174 [2], clause 10.6 |
0 dB |
Formula: Wanted signal power unchanged Interferer signal power – TT. |
|
7.7 OTA receiver spurious emissions |
See TS 38.174 [2], clause 10.7 |
0 dB |
Formula: Minimum Requirement + TT |
|
7.8 OTA receiver intermodulation |
See TS 38.174 [2], clause 10.8 |
0 dB |
Formula: Wanted signal power + TT Interferer signal power unchanged |
|
7.9 OTA in-channel selectivity |
See TS 38.174 [2], clause 10.9 |
1.7 dB, f ≤ 3.0 GHz 2.1 dB, 3.0 GHz < f ≤ 4.2 GHz 2.4 dB, 4.2 GHz < f ≤ 6.0 GHz |
Formula: Wanted signal power + TT Interferer signal power unchanged |
|
NOTE: TT values are applicable for normal condition unless otherwise stated. |
|||
Table C.2-2: Derivation of test requirements (FR2 OTA receiver tests)
|
Test |
Minimum requirement in TS 38.174 [2] |
Test Tolerance (TTOTA) |
Test requirement in the present document |
|
|
IAB-DU |
IAB-MT |
|||
|
7.3 OTA reference sensitivity level |
See TS 38.174 [2], clause 10.3 |
2.4 dB, 24.25 GHz < f ≦ 33.4 GHz 2.4 dB, 37 GHz < f ≦ 43.5 GHz |
±3.3 dB, 24.25 GHz < f ≤ 29.5 GHz ±3.3 dB, 37 GHz < f ≤ 43.5 GHz |
Formula: EISREFSENS+ TT |
|
7.5.1 OTA adjacent channel selectivity |
See TS 38.174 [2], clause 10.5.1 |
0 dB |
0 dB |
Formula: Wanted signal power + TT Interferer signal power unchanged. |
|
7.5.2 In-band blocking |
See TS 38.174 [2], clause 10.5.2 |
0 dB |
0 dB |
Formula: Wanted signal power + TT Interferer signal power unchanged. |
|
7.6 OTA out-of-band blocking |
See TS 38.174 [2], clause 10.6 |
0 dB |
0 dB |
Formula: Wanted signal power + TT Interferer signal power unchanged |
|
7.7 OTA receiver spurious emissions |
See TS 38.174 [2], clause 10.7 |
0 dB |
0 dB |
Formula: Minimum Requirement + TT |
|
7.8 OTA receiver intermodulation |
See TS 38.174 [2], clause 10.8 |
0 dB |
N/A |
Formula: Wanted signal power + TT Interferer signal power unchanged. |
|
7.9 OTA in-channel selectivity |
See TS 38.174 [2], clause 10.9 |
3.4 dB, 24.25 GHz < f ≦ 33.4 GHz 3.4 dB, 37 GHz < f ≦ 43.5 GHz |
N/A |
Formula: Wanted signal power + TT Interferer signal power unchanged. |
|
NOTE: TT values are applicable for normal condition unless otherwise stated. |
||||