C.3 Measurement of performance requirements
38.176-13GPPIntegrated Access and Backhaul (IAB) conformance testingNRPart 1: conducted conformance testingRelease 17TS
C.3.1 List IAB-DU TTs
Table C.3-1: Derivation of Test Requirements (Performance tests)
|
Test |
Minimum Requirement in TS 38.174 [2] |
Test Tolerance |
Test requirement in the present document |
|
Performance requirements for PUSCH with transform precoding disabled |
SNRs as specified |
0.6 dB for 1Tx cases 0.8 dB for 2Tx cases |
Formula: SNR + TT T-put limit unchanged |
|
Performance requirements for PUSCH with transform precoding enabled |
SNRs as specified |
0.6 dB |
Formula: SNR + TT T-put limit unchanged |
|
Performance requirements for UCI multiplexed on PUSCH |
SNRs as specified |
0.6 dB |
Formula: SNR + TT BLER limit unchanged |
|
Performance requirements for PUCCH format 0 |
SNRs as specified |
0.6 dB |
Formula: SNR + TT False ACK limit unchanged Correct ACK limit unchanged |
|
Performance requirements for PUCCH format 1 |
SNRs as specified |
0.6 dB |
Formula: SNR + TT False ACK limit unchanged False NACK limit unchanged Correct ACK limit unchanged |
|
Performance requirements for PUCCH format 2 |
SNRs as specified |
0.6 dB |
Formula: SNR + TT False ACK limit unchanged Correct ACK limit unchanged UCI BLER limit unchanged |
|
Performance requirements for PUCCH format 3 |
SNRs as specified |
0.6 dB |
Formula: SNR + TT UCI BLER limit unchanged |
|
Performance requirements for PUCCH format 4 |
SNRs as specified |
0.6 dB |
Formula: SNR + TT UCI BLER limit unchanged |
|
Performance requirements for multi-slot PUCCH |
SNRs as specified |
0.6 dB |
Formula: SNR + TT False ACK limit unchanged False NACK limit unchanged Correct ACK limit unchanged |
|
PRACH false alarm probability and missed detection |
SNRs as specified |
0.3 dB |
Formula: SNR + TT PRACH false detection limit unchanged PRACH detection limit unchanged |
C.3.2 List IAB-MT TTs
Table C.3-2: Derivation of Test Requirements (Performance tests)
|
Test |
Minimum Requirement in TS 38.174 [2] |
Test Tolerance |
Test requirement in the present document |
|
Performance requirements for PDSCH |
SNRs as specified |
[1dB] |
Formula: SNR + TT T-put limit unchanged |
|
Performance requirements for PDCCH |
SNRs as specified |
[0.9 dB] for 1TX [1dB] for 2TX |
Formula: SNR + TT T-put limit unchanged |
|
Performance requirements for CSI reporting |
SNRs as specified |
No test tolerances applied |
SNR limit unchanged |
Annex D (informative):
Measurement system set-up