Foreword1 Scope2 References3 Definitions, symbols and abbreviations4 Idle Mode5 UTRAN Connected Mode Mobility6 (void)6A RRC Connection Control7 Timing characteristics8 UE Measurements Procedures8.1 General Measurement Requirements in CELL_DCH State (3.84 Mcps option)8.1A General Measurements Requirements in CELL_DCH State (1.28 Mcps option)8.1B General Measurement Requirements in CELL_DCH State (7.68 Mcps option)8.2 Measurements in CELL_DCH State with special requirements (3.84 Mcps option)8.2A Parallel Measurements in CELL_DCH State (1.28 Mcps option)8.2B Measurements in CELL_DCH State with special requirements (7.68 Mcps option)8.3 Capabilities for Support of Event Triggering and Reporting Criteria in CELL_DCH state (3.84 Mcps option)8.3A Capabilities for Support of Event Triggering and Reporting Criteria in CELL_DCH State (1.28 Mcps option)8.3B Capabilities for Support of Event Triggering and Reporting Criteria in CELL_DCH state (7.68 Mcps option)8.4 Measurements in CELL_FACH State (3.84 Mcps option)8.4A Measurements in CELL_FACH State (1.28 Mcps option)8.4B Measurements in CELL_FACH State (7.68 Mcps option)8.5 Capabilities for Support of Event Triggering and Reporting Criteria in CELL_FACH state (3.84 Mcps TDD option)8.5A Capabilities for Support of Event Triggering and Reporting Criteria in CELL_FACH state (1.28 Mcps option)8.5B Capabilities for Support of Event Triggering and Reporting Criteria in CELL_FACH state (7.68 Mcps TDD option)9 Measurements performance requirements10 FPACH physical layer information field definition (1.28 Mcps TDD)A.1 Purpose of AnnexA.2 Requirement classification for statistical testingA.3 RRM test configurationsA.4 Idle ModeA.5 UTRAN Connected Mode MobilityA.5.1 TDD/TDD HandoverA.5.2 TDD/FDD HandoverA.5.3 TDD/GSM HandoverA.5.3a TDD to E-UTRA FDD HandoverA.5.3b TDD to E-UTRA TDD HandoverA.5.3c UTRA TDD to E-UTRA FDD handover: unknown target cellA.5.3d UTRA TDD to E-UTRA TDD handover: unknown target cellA.5.3e TDD/GSM Handover: Non-synchronization target cellA.5.4 Cell Re-selection in CELL_FACHA.5.4A Cell Re-selection in Enhanced CELL_FACHA.5.5 Cell Re-selection in CELL_PCHA.5.6 Cell Re-selection in URA_PCHA.5.7 Serving HS-DSCH cell changeA.5.8 Inter-RAT cell change order from UTRAN TDD to GSM(GPRS)A.6 (void)A.6A RRC Connection ControlA.7 Timing characteristicsA.8 UE Measurements ProceduresA.9 Measurement Performance RequirementsA.9 Measurement Performance RequirementsA.9.1 Measurement Performance for UE (3.84 Mcps TDD option)A.9.2 Measurement Performance for UE for 1.28 Mcps TDDA.9.3 Measurement Performance for UE (7.68 Mcps TDD option)B.1. Conditions for Idle modeB.2. Conditions for UE Measurements Procedures A.6 (void) 25.1233GPPRelease 17Requirements for support of radio resource management (TDD)TS Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM