5.2.39D /<x>/<x>/Common/MCPTTGroupCall/ImminentPerilCall/
MCPTTGroupInitiation/Entry/Usage

24.4833GPPMission Critical Services (MCS) Management Object (MO)Release 18TS

Table 5.2.39D.1: /<x>/<x>/Common/MCPTTGroupCall/ImminentPerilCall/MCPTTGroupInitiation/Entry/
Usage

<x>/Common/MCPTTGroupCall/ImminentPerilCall/MCPTTGroupInitiation/Entry/Usage
	Status	Occurrence	Format	Min. Access Types
	Required	One	chr	Get, Replace
	This leaf node indicates the criteria to determine when initiation of an MCPTT imminent peril group call uses the GroupID.

The valid values are ‘UseCurrentlySelectedGroup’ and ‘DedicatedGroup’.

When set to ‘UseCurrentlySelectedGroup’ then if the MCPTT user has currently selected an MCPTT group then use that MCPTT group for an on-network MCPTT imminent peril group call, if the MCPTT user does not have a currently selected MCPTT group then use the MCPTT group identified by the GroupID in clause 5.2.39B for an MCPTT imminent peril group call.

When set to ‘DedicatedGroup’ then use the MCPTT group identified by the GroupID in clause 5.2.39B for an MCPTT imminent peril group call.