27.22.8 MO SHORT MESSAGE CONTROL BY SIM

3GPP51.010-4Mobile Station (MS) conformance specificationPart 4: Subscriber Identity Module (SIM) application toolkit conformance test specificationRelease 17TS

27.22.8.1 Definition and applicability

See clause 3.2.2.

27.22.8.2 Conformance requirement

The ME shall support the MO SEND SHORT MESSAGE CONTROL facility as defined in:

– TS 11.14 [15] clause 9.2.

The ME shall also support the SEND SMS facitily as specified in

– TS 11.14 [15] clause 6.4.10

27.22.8.3 Test purpose

To verify that for all SMS sending attempts, even those resulting from a SEND SHORT MESSAGE proactive SIM command, the ME shall first pass the RP_destination_address of the service center and the TP_Destination_Address to the SIM, using the ENVELOPE (MO Short Message CONTROL).

To verify that if the SIM responds with ’90 00′, the ME shall send the SMS with the address unchanged.

To verify that if the SIM responds with ’93 00′, the ME shall not send the SMS and may retry the command.

To verify that if the SIM responds with ‘9F XX’, the ME shall use the GET RESPONSE command to get the response data. The response data from the SIM shall indicate to the ME whether to send the SM as proposed, not send the SM, send the SM using the data supplied by the SIM.

To verify that, in the case where the initial SM request results from a proactive SEND SHORT MESSAGE, if the MO SMS CONTROL result is "not allowed" or "allowed with modifications", the ME shall inform the SIM using TERMINAL RESPONSE "interaction with call control by SIM or MO short message control by SIM, action not allowed".

27.22.8.4 Method of tests

27.22.8.4.1 Initial conditions

The ME is connected to the System Simulator and the SIM Simulator.

Prior to this test the ME shall have been powered on and performed the PROFILE DOWNLOAD procedure.

The MO SMS control service is enabled.

The SMS service center address in the ME shall be set to “+112233445566778” prior to the execution of the tests.

The GSM parameters of the system simulator are:

– Mobile Country Code (MCC) = 001;

– Mobile Network Code (MNC) = 01;

– Location Area Code (LAC) = 0001;

– Cell Identity value = 0001;

The PCS 1900 parameters of the system simulator are:

– Mobile Country Code (MCC) = 001;

– Mobile Network Code (MNC) = 011;

– Location Area Code (LAC) = 0001;

– Cell Identity value = 0001.

27.22.8.4.2 Procedure

Expected Sequence 1.1 (MO SM CONTROL BY SIM , with Proactive command, Allowed, no modification’)

Step

Direction

Message / Action

Comments

1

SIM -> ME

PROACTIVE COMMAND PENDING: SEND SHORT MESSAGE 1.1.1

2

ME -> SIM

FETCH

3

SIM -> ME

PROACTIVE COMMAND: SEND SHORT MESSAGE 1.1.1

4

ME -> USER

Display "Send SM"

[Alpha Identifier]

5

ME -> SIM

ENVELOPE: MO SHORT MESSAGE CONTROL 1.1.1A

Or

ENVELOPE: MO SHORT MESSAGE CONTROL 1.1.1B

[Option A shall apply for GSM parameters]

[Option B shall apply for PCS1900 parameters]

6

SIM -> ME

9F 02

7

ME -> SIM

GET RESPONSE

8

SIM -> ME

MO SMS CONTROL RESULT 1.1.1

[ “Allowed, no modification”]

9

ME -> SS

Send SMS-PP Message 1.1

[The ME sends the SM containing SMS-PP (SEND SHORT MESSAGE) Message 1.1 without modification]

10

SS -> ME

SMS RP-ACK

11

ME -> SIM

TERMINAL RESPONSE: SEND SHORT MESSAGE 1.1.1

PROACTIVE COMMAND: SEND SHORT MESSAGE 1.1.1

Logically:

Command details

Command number: 1

Command type: SEND SHORT MESSAGE

Command qualifier: packing not required

Device identities

Source device: SIM

Destination device: Network

Alpha identifier: "Send SM"

Address

TON: International number

NPI: "ISDN / telephone numbering plan"

Dialling number string "112233445566778"

SMS TPDU

TP-MTI SMS-SUBMIT

TP-RD Instruct the SC to accept an SMS-SUBMIT for a SM

TP-VPF TP-VP field not present

TP-RP TP-Reply-Path is not set in this SMS-SUBMIT

TP-UDHI The TP-UD field contains only the short message

TP-SRR A status report is not requested

TP-MR "00"

TP-DA

TON International number

NPI "ISDN / telephone numbering plan"

Address value "012345678"

TP-PID Short message type 0

TP-DCS

Message coding 8-bit data

Message class class 0

TP-UDL 12

TP-UD "Test Message"

Coding:

BER-TLV:

D0

37

81

03

01

13

00

82

02

81

83

85

07

53

65

6E

64

20

53

4D

86

09

91

11

22

33

44

55

66

77

F8

8B

18

01

00

09

91

10

32

54

76

F8

40

F4

0C

54

65

73

74

20

4D

65

73

73

61

67

65

SMS-PP (SEND SHORT MESSAGE) Message 1.1

Logically:

SMS RPDU

RP-Originator Address not used

RP-Destination SMSC Address

TON International number

NPI "ISDN / telephone numbering plan"

Address value "112233445566778"

SMS TPDU

TP-MTI SMS-SUBMIT

TP-RD Instruct the SC to accept an SMS-SUBMIT for a SM

TP-VPF TP-VP field not present

TP-RP TP-Reply-Path is not set in this SMS-SUBMIT

TP-UDHI The TP-UD field contains only the short message

TP-SRR A status report is not requested

TP-MR "01"

TP-DA

TON International number

NPI "ISDN / telephone numbering plan"

Address value "012345678"

TP-PID Short message type 0

TP-DCS

Message coding 8-bit data

Message class class 0

TP-UDL 12

TP-UD "Test Message"

Coding:

Coding

00

09

91

11

22

33

44

55

66

77

F8

18

01

01

09

91

10

32

54

76

F8

40

F4

0C

54

65

73

74

20

4D

65

73

73

61

67

65

ENVELOPE MO SHORT MESSAGE CONTROL 1.1.1A

Logically:

Device identities

Source device: ME

Destination device: SIM

RP Destination Address

TON: International

NPI: "ISDN / telephone numbering plan" or "unknown"

Dialling number string “112233445566778”

TP Destination Address

TON: International

NPI: "ISDN / telephone numbering plan" or "unknown"

Dialling number string “012345678”

Location Information

MCC & MNC the mobile country and network code (00F110)

LAC the location Area Code (0001)

Cell ID Cell Identity Value (0001)

Coding:

BER-TLV:

D5

20

02

02

82

81

06

09

91

11

22

33

44

55

66

77

F8

06

06

91

10

32

54

76

F8

13

07

00

F1

10

00

01

00

01

ENVELOPE MO SHORT MESSAGE CONTROL 1.1.1B

Logically:

Device identities

Source device: ME

Destination device: SIM

RP Destination Address

TON: International

NPI: "ISDN / telephone numbering plan" or "unknown"

Dialling number string “112233445566778”

TP Destination Address

TON: International

NPI: "ISDN / telephone numbering plan" or "unknown"

Dialling number string “012345678”

Location Information

MCC & MNC the mobile country and network code (001110)

LAC the location Area Code (0001)

Cell ID Cell Identity Value (0001)

Coding:

BER-TLV:

D5

20

02

02

82

81

06

09

91

11

22

33

44

55

66

77

F8

06

06

91

10

32

54

76

F8

13

07

00

11

10

00

01

00

01

MO SHORT MESSAGE CONTROL RESULT 1.1.1

Logically:

MO Short Message control result : ’00’ = Allowed, no modification

Coding:

BER-TLV:

00

00

TERMINAL RESPONSE: SEND SHORT MESSAGE 1.1.1

Logically:

Command details

Command number: 1

Command type: SEND SHORT MESSAGE

Command qualifier: packing not required

Device identities

Source device: ME

Destination device: SIM

Result

General Result: Command performed successfully

Coding:

BER-TLV:

81

03

01

13

00

82

02

82

81

83

01

00

Expected Sequence 1.2 (MO SM CONTROL BY SIM , with user SMS, Allowed, no modification’)

Step

Direction

Message / Action

Comments

1

USER -> ME

The user makes a SMS with the user data “Test Message“ and sends it to +012345678.

[The data entered and the ME settings shall lead to the same SMS-TPDU as defined in SMS-PP (SEND SHORT MESSAGE) Message 1.2.

2

ME -> SIM

ENVELOPE: MO SHORT MESSAGE CONTROL 1.1.1A

or

ENVELOPE: MO SHORT MESSAGE CONTROL 1.1.1B

[Option A shall apply for GSM parameters]

[Option B shall apply for PCS1900 parameters]

3

SIM -> ME

9F 02

4

ME -> SIM

GET RESPONSE

5

SIM -> ME

MO SHORT MESSAGE CONTROL RESULT 1.1.1

[ “Allowed, no modification”]

6

ME -> SS

Send SMS-PP Message 1.2

[The ME sends the SM containing SMS-PP (SEND SHORT MESSAGE) Message 1.2 without modification]

7

SS -> ME

SMS RP-ACK

SMS-PP (SEND SHORT MESSAGE) Message 1.2

Logically:

SMS RPDU

RP-Originator Address not used

RP-Destination SMSC Address

TON International number

NPI "ISDN / telephone numbering plan"

Address value "112233445566778"

SMS TPDU

TP-MTI SMS-SUBMIT

TP-RD value shall not be verified

TP-VPF value shall not be verified

TP-RP value shall not be verified

TP-UDHI value shall not be verified

TP-SRR value shall not be verified

TP-MR "01"

TP-DA

TON International number

NPI "ISDN / telephone numbering plan"

Address value "012345678"

Coding:

Coding

00

09

91

11

22

33

44

55

66

77

F8

Note 1

Note 2

01

09

91

10

32

54

76

F8

Note 3

Note 1: Octet shall not be verified.

Note 2: Only the TP-MTI bits shall be verified.

Note 3: The remaining octets shall not be verified.

Expected Sequence 1.3 (MO SM CONTROL BY SIM , with Proactive command, Not allowed’)

Step

Direction

Message / Action

Comments

1

SIM -> ME

PROACTIVE COMMAND PENDING: SEND SHORT MESSAGE 1.1.1

2

ME -> SIM

FETCH

3

SIM -> ME

PROACTIVE COMMAND: SEND SHORT MESSAGE 1.1.1

4

ME -> USER

Display "Send SM"

[The display of the Alpha Identifier shall not be verified]

5

ME -> SIM

ENVELOPE : MO SHORT MESSAGE CONTROL 1.1.1A

or

ENVELOPE : MO SHORT MESSAGE CONTROL 1.1.1B

[Option A shall apply for GSM parameters]

[Option B shall apply for PCS1900 parameters]

6

SIM -> ME

9F 02

7

ME -> SIM

GET RESPONSE

8

SIM -> ME

MO SHORT MESSAGE CONTROL RESULT 1.3.1

[ “not Allowed”]

9

ME -> SIM

TERMINAL RESPONSE: SEND SHORT MESSAGE 1.3.1

[ Permanent Problem – Interaction with Call Control or MO short message control by SIM ]

10

ME🡪 SS

The ME does not send the Short Message

MO SHORT MESSAGE CONTROL RESULT 1.3.1

Logically:

MO Short Message control result : ’01’ = Not Allowed

Coding:

BER-TLV:

01

00

TERMINAL RESPONSE: SEND SHORT MESSAGE 1.3.1

Logically:

Command details

Command number: 01

Command Type: SEND SHORT MESSAGE

Command qualifier: packing not required

Device identities

Source device: ME

Destination device: SIM

Result

General Result: Interaction with call control or MO-SM by SIM permanent problem

Additional information: Action not allowed

Coding:

BER-TLV:

81

03

01

13

00

82

02

82

81

83

02

39

01

Expected Sequence 1.4 (MO SM CONTROL BY SIM , with user SMS, Not allowed’)

Step

Direction

Message / Action

Comments

1

USER -> ME

The user makes a SMS with the user data “Test Message“ and sends it to +012345678.

[The data entered and the ME settings shall lead to the same SMS-TPDU as defined in SMS-PP (SEND SHORT MESSAGE) Message 1.2.

2

ME -> SIM

ENVELOPE : MO SHORT MESSAGE CONTROL 1.1.1A

or

ENVELOPE : MO SHORT MESSAGE CONTROL 1.1.1B

[Option A shall apply for GSM parameters]

[Option B shall apply for PCS1900 parameters]

3

SIM -> ME

9F 02

4

ME -> SIM

GET RESPONSE

5

SIM -> ME

MO SM CONTROL RESULT 1.3.1

[ “Not allowed”]

6

ME 🡪 SS

The ME does not send the Short Message

Expected Sequence 1.5 (MO SM CONTROL BY SIM , with Proactive command, Allowed with modifications’)

Step

Direction

Message / Action

Comments

1

SIM -> ME

PROACTIVE COMMAND PENDING: SEND SHORT MESSAGE 1.1.1

2

ME -> SIM

FETCH

3

SIM -> ME

PROACTIVE COMMAND: SEND SHORT MESSAGE 1.1.1

Send SMS to “+012345678”

4

ME -> USER

Display "Send SM"

[Alpha Identifier]

5

ME -> SIM

ENVELOPE: MO SHORT MESSAGE CONTROL 1.1.1A

or

ENVELOPE: MO SHORT MESSAGE CONTROL 1.1.1B

[Option A shall apply for GSM parameters]

[Option B shall apply for PCS1900 parameters]

6

SIM -> ME

9F 15

7

ME -> SIM

GET RESPONSE

8

SIM -> ME

MO SM CONTROL RESULT 1.5.1

[“Allowed with modifications”]

9

ME -> SS

Send SMS-PP Message 1.5

[The ME sends the SM containing SMS-PP (SEND SHORT MESSAGE) Message 1.5 with the data provided by the SIM to the changed Service Center Address “+112233445566779” ]

10

SS -> ME

SMS RP-ACK

11

ME -> SIM

TERMINAL RESPONSE: SEND SHORT MESSAGE 1.5.1

MO SHORT MESSAGE CONTROL RESULT 1.5.1

Logically:

MO Short Message control result : ’02’ = Allowed with modifications

RP Destination_Address of the Service Center

TON: International

NPI: "ISDN / telephone numbering plan" or "unknown"

Dialling number string: “112233445566779”

TP Destination Address

TON: International

NPI: "ISDN / telephone numbering plan" or "unknown"

Dialling number string: “012345679”

Coding:

BER-TLV:

02

13

86

09

91

11

22

33

44

55

66

77

F9

86

06

91

10

32

54

76

F9

SMS-PP (SEND SHORT MESSAGE) Message 1.5

Logically:

SMS RPDU

RP-Originator Address not used

RP-Destination SMSC Address

TON International number

NPI "ISDN / telephone numbering plan"

Address value "112233445566779"

SMS TPDU

TP-MTI SMS-SUBMIT

TP-RD Instruct the SC to accept an SMS-SUBMIT for a SM

TP-VPF TP-VP field not present

TP-RP TP-Reply-Path is not set in this SMS-SUBMIT

TP-UDHI The TP-UD field contains only the short message

TP-SRR A status report is not requested

TP-MR "01"

TP-DA

TON International number

NPI "ISDN / telephone numbering plan"

Address value "012345679"

TP-PID Short message type 0

TP-DCS

Message coding 8-bit data

Message class class 0

TP-UDL 12

TP-UD "Test Message"

Coding:

Coding:

00

09

91

11

22

33

44

55

66

77

F9

18

01

01

09

91

10

32

54

76

F9

40

F4

0C

54

65

73

74

20

4D

65

73

73

61

67

65

TERMINAL RESPONSE: SEND SHORT MESSAGE 1.5.1

Logically:

Command details

Command number: 01

Command Type: SEND SHORT MESSAGE

Command qualifier: packing not required

Device identities

Source device: ME

Destination device: SIM

Result

General Result: Command performed successfully

Coding:

BER-TLV:

81

03

01

13

00

82

02

82

81

83

01

00

Expected Sequence 1.6 (MO SM CONTROL BY SIM , with user SMS, Allowed with modifications’)

Step

Direction

Message / Action

Comments

1

USER -> ME

The user makes a SMS with the user data “Test Message“ and sends it to +012345678.

[The data entered and the ME settings shall lead to the same SMS-TPDU as defined in SMS-PP (SEND SHORT MESSAGE) Message 1.2.

2

ME -> SIM

ENVELOPE: MO SHORT MESSAGE CONTROL 1.1.1A

or

ENVELOPE: MO SHORT MESSAGE CONTROL 1.1.1B

[Option A shall apply for GSM parameters]

[Option B shall apply for PCS1900 parameters]

3

SIM -> ME

9F XX

4

ME -> SIM

GET RESPONSE

5

SIM -> ME

MO SM CONTROL RESULT 1.5.1

[ “Allowed with modifications”]

6

ME-> SS

Send SMS-PP Message 1.6

[The ME sends the SM containing SMS-PP (SEND SHORT MESSAGE) Message 1.6 with the data provided by the SIM] to the changed Service Center Address “+112233445566779”

7

SS -> ME

SMS RP-ACK

SMS-PP (SEND SHORT MESSAGE) Message 1.6

Logically:

SMS RPDU

RP-Originator Address not used

RP-Destination SMSC Address

TON International number

NPI "ISDN / telephone numbering plan"

Address value "112233445566779"

SMS TPDU

TP-MTI SMS-SUBMIT

TP-RD value shall not be verified

TP-VPF value shall not be verified

TP-RP value shall not be verified

TP-UDHI value shall not be verified

TP-SRR value shall not be verified

TP-MR "01"

TP-DA

TON International number

NPI "ISDN / telephone numbering plan"

Address value "012345679"

Coding:

Coding

00

09

91

11

22

33

44

55

66

77

F9

Note 1

Note 2

01

09

91

10

32

54

76

F9

Note 3

Note 1: Octet shall not be verified

Note 2: Only the TP-MTI bits shall be verified

Note 3: The remaining octets shall not be verified

Expected Sequence 1.7 (MO SM CONTROL BY SIM , with Proactive command, the SIM responds with ’90 00′, Allowed, no modification)

Step

Direction

Message / Action

Comments

1

SIM -> ME

PROACTIVE COMMAND PENDING: SEND SHORT MESSAGE 1.1.1

2

ME -> SIM

FETCH

3

SIM -> ME

PROACTIVE COMMAND: SEND SHORT MESSAGE 1.1.1

Send SMS to “+012345678”

4

ME -> USER

Display "Send SM"

[Alpha Identifier]

5

ME -> SIM

ENVELOPE : MO SHORT MESSAGE CONTROL 1.1.1A

or

ENVELOPE : MO SHORT MESSAGE CONTROL 1.1.1B

[Option A shall apply for GSM parameters]

[Option B shall apply for PCS1900 parameters]

6

SIM -> ME

90 00

7

ME ->SS

Send SMS-PP

[The ME sends the SM containing SMS-PP (SEND SHORT MESSAGE) Message 1.1 without modification]

8

SS -> ME

SMS RP-ACK

9

ME -> SIM

TERMINAL RESPONSE: SEND SHORT MESSAGE 1.1.1

Expected Sequence 1.8 (MO SM CONTROL BY SIM , Send Short Message attempt by user, the SIM responds with ’90 00′, Allowed, no modification)

Step

Direction

Message / Action

Comments

1

User  ME

The user makes a SMS with the user data “Test Message“ and sends it to +012345678.

[The data entered and the ME settings shall lead to the same SMS-TPDU as defined in SMS-PP (SEND SHORT MESSAGE) Message 1.2.

2

ME  SIM

ENVELOPE : MO SHORT MESSAGE CONTROL 1.1.1 A

or

ENVELOPE : MO SHORT MESSAGE CONTROL 1.1.1B

[Option A shall apply for GSM parameters]

[Option B shall apply for PCS1900 parameters]

3

SIM  ME

90 00

4

ME SS

Send SMS-PP

[The ME sends the SM containing SMS-PP (SEND SHORT MESSAGE) Message 1.2 without modification]

5

SS -> ME

SMS RP-ACK

Expected Sequence 1.9 Void

27.22.8.5 Test requirement

The ME shall operate in the manner defined in expected sequences 1.1 to 1.9.

Annex A:
Void

Annex B:
Void

Annex C:
Void

Annex D (normative):
Details of Test-SIM (TestSIM)

The TestSIM shall be able to present the following data:

ANSWER TO RESET

Logically:

TS (Initial character): ‘3B’

T0 (Format character): ’86’ (Following interface characters: TD(1), number of historical characters: 6)

TD1: ’00’ (Following interface characters: none, Transfer protocol: T=0)

T1: 91

T2: 99

T3: 00

T4: 12

T5: C1

T6: 00

Coding:

BER-TLV:

3B

86

00

91

99

00

12

C1

00

1. For a successful outcome of the command "Select MasterFile" the TestSIM shall send SW1/SW2 "9F 1B".

2. For a successful outcome of the command "Get Response with Length 1B" on the MasterFile the TestSIM shall respond:

RFU: ’00 00′

Not allocated memory: ‘653 bytes’

File ID: Master File

Type of file: MF

RFU: 00 00 22 FF 01′

Length of following data: 14 bytes’

File characteristics:

Clock Stop: Not allowed

Min. frequence for GSM algorithm: 13/8 MHz

Technology identification: 3V Technology SIM

CHV1: disabled

DFs in current directory: 2

EFs in current directory: 8

Number of CHV and admin. Codes: 3

RFU byte 18: 00

CHV1 status:

False representations remaining: 3

RFU-bits 7-5: 000

Secret code: Initialized

Unlock CHV1 status:

False representations remaining: 10

RFU-bits 7-5: 000

Secret code: Initialized

CHV2 status:

False representations remaining: 3

RFU-bits 7-5: 000

Secret code: Initialized

Unlock CHV2 status:

False representations remaining: 10

RFU-bits 7-5: 000

Secret code: Initialized

RFU bytes 23: 00

Reserved for admin. management: 00 83 00 FF

Status Words

SW1 / SW2: Normal ending of command

Coding:

Coding

00

00

02

8D

3F

00

01

00

00

22

FF

01

0E

9B

02

08

03

00

83

8A

83

8A

00

00

83

00

FF

90

00

1. For a successful outcome of the command "Select GSM" the TestSIM shall send SW1/SW2 "9F 1B".

2. For a successful outcome of the command "Select PLMN" the TestSIM shall send SW1/SW2 "9F 0F".

3. EFPLMN Information:

RFU-Bytes 1-2: 00 00

File size: 102 bytes

File ID: 6F30

Type of File: Elementary file

Byte 8

RFU: 00

Access Condition:

UPDATE: CHV1

READ/SEEK: CHV1

RFU-bits 4-1: 1111

INCREASE: NEVER

INVALIDATE: NEVER

REHABILITATE: NEVER

File Status:

Invalidation status: File not invalidated

Readable/updateable: Not readable/updatable when invalidated

RFU-bits 8-4, 2: 0000 0

Length of following data: 2 bytes

Structure: Transparent

Length of record: 00

The initial coding of the EF­PLMN shall be FF FF … FF (logically: Empty).

Annex E (normative):
Details of terminal profile support

Table E.1: TERMINAL PROFILE support

Item

Terminal Profile

Ref.

Release

Status

Support

Mnemonic

1

Profile Download

TS 11.14, 5

R96

M

PD_Pro_Dvnl

2

SMS-PP data download

TS 11.14, 5

R96

M

PD_SMS_PP

3

Cell Broadcast data download

TS 11.14, 5

R96

M

PD_CB

4

Menu selection

TS 11.14, 5

R96

C228 AND C229

PD_Menu_sel

5

‘9EXX’ response code for SIM data download error

TS 11.14, 5

R97

C224

PD_9EXX

6

Timer expiration

TS 11.14, 5

R98

M

PD_TExpir

7

USSD string data object supported in Call Control

TS 11.14, 5

R98

M

PD_CC_USSD_Str

8

Envelope Call Control always sent to the SIM during automatic redial mode

TS 11.14, 5

R99

C225 AND C231

PD_CC_Auto_Redial

9

Command result

TS 11.14, 5

R96

M

PD_Cmd_Res

10

Call Control by SIM

TS 11.14, 5

R96

C231

PD_CC

11

Cell identity included in Call Control by SIM

TS 11.14, 5

R97

C231

PD_CC_Cell_Id

12

MO short message control by SIM

TS 11.14, 5

R98

M

PD_MO_SMS_CC

13

Handling of the alpha identifier

TS 11.14, 5

R97

M

PD_Alpha _Id

14

UCS2 Entry supported

TS 11.14, 5

R97

C203 AND C229

PD_UCS2_entry

15

UCS2 Display supported

TS 11.14, 5

R97

C204 AND C228

PD_UCS2_Display

16

Display of the extension text

TS 11.14, 5

R98

C205 AND C228

PD_Disp_Ext_Text

17

DISPLAY TEXT

TS 11.14, 5

R96

C228

PD_Display_Text

18

GET INKEY

TS 11.14, 5

R96

C228 AND C229

PD_Get_Inkey

19

GET INPUT

TS 11.14, 5

R96

C228 AND C229

PD_Get_Input

20

MORE TIME

TS 11.14, 5

R96

M

PD_More_Time

21

PLAY TONE

TS 11.14, 5

R96

C230

PD_Play_Tone

22

POLL INTERVAL

TS 11.14, 5

R96

M

PD_Poll_interval

23

POLLING OFF

TS 11.14, 5

R96

M

PD_Polling_Off

24

REFRESH

TS 11.14, 5

R96

M

PD_Refresh

25

SELECT ITEM

TS 11.14, 5

R96

C228 AND C229

PD_Select_Item

26

SEND SHORT MESSAGE

TS 11.14, 5

R96

M

PD_Send_SMS

27

SEND SS

TS 11.14, 5

R96

M

PD_Send_SS

28

SEND USSD

TS 11.14, 5

R98

M

PD_Send_USSD

29

SET UP CALL

TS 11.14, 5

R96

C228 AND C229 AND C231

PD_SetUp_Call

30

SET UP MENU

TS 11.14, 5

R96

C228 AND C229

PD_SetUp_Menu

31

PROVIDE LOCAL INFORMATION (LOCI & IMEI)

TS 11.14, 5

R96

M

PD_Provide_Local

32

PROVIDE LOCAL INFORMATION (NMR)

TS 11.14, 5

R97

M

PD_Provide_Local_NMR

33

SET UP EVENT LIST

TS 11.14, 5

R98

M

PD_Setup_Evt_List

34

Event: MT call

TS 11.14, 5

R98

C231

PD_MT_Call

35

Event: Call connected

TS 11.14, 5

R98

C231

PD_Call_Conn

36

Event: Call disconnected

TS 11.14, 5

R98

C231

PD_Call_Disc

37

Event: Location status

TS 11.14, 5

R98

M

PD_Loc_Status

38

Event: User activity

TS 11.14, 5

R98

C229

PD_User_Act

39

Event: Idle screen available

TS 11.14, 5

R98

C228

PD_Idle_Scr_Avail

40

Event: Card reader status

TS 11.14, 5

R98

C206

PD_Evt_Rdr_Status

41

Event: Language selection

TS 11.14, 5

R99

C232

PD_Lang_Select

42

Event: Browser Termination

TS 11.14, 5

R99

C212 AND C228 AND C229

PD_Browser_Term

43

Event: Data available

TS 11.14, 5

R99

C223

PD_Data_Avail

44

Event: Channel status

TS 11.14, 5

R99

C223

PD_Evt_Ch_Status

45

RFU

TS 11.14, 5

R96

X

PD_RFU_45

46

RFU

TS 11.14, 5

R96

X

PD_RFU_46

47

RFU

TS 11.14, 5

R96

X

PD_RFU_47

48

RFU

TS 11.14, 5

R96

X

PD_RFU_48

49

POWER ON CARD

TS 11.14, 5

R98

C206

PD_C_On

50

POWER OFF CARD

TS 11.14, 5

R98

C206

PD_C_Off

51

PERFORM CARD APDU

TS 11.14, 5

R98

C206

PD_C_APDU

52

GET READER STATUS (Card reader status)

TS 11.14, 5

R98

C206

PD_Get_Rdr_Status

53

GET READER STATUS (Card reader identifier)

TS 11.14, 5

R99

C208

PD_Get_Rdr_Id

54

RFU

TS 11.14, 5

R96

X

PD_RFU_54

55

RFU

TS 11.14, 5

R96

X

PD_RFU_55

56

RFU

TS 11.14, 5

R96

X

PD_RFU_56

57

TIMER MANAGEMENT (start, stop)

TS 11.14, 5

R98

M

PD_Timer_Mgt_Start_Stop

58

TIMER MANAGEMENT (get current value)

TS 11.14, 5

R98

M

PD_Timer_Val

59

PROVIDE LOCAL INFORMATION (date, time and time zone)

TS 11.14, 5

R98

M

PD_Provide_Local_D_Time

60

Binary choice in GET INKEY

TS 11.14, 5

R98

C229

PD_Bin_Get_Inkey

61

SET UP IDLE MODE TEXT

TS 11.14, 5

R98

C228

PD_Stup_Id_Mod_Txt

62

RUN AT COMMAND (i.e. class "b" is supported)

TS 11.14, 5

R98

C209

PD_Run_AT

63

2nd alpha identifier in SET UP CALL

TS 11.14, 5

R98

C226 AND C228 AND C229 AND C231

PD_SetUp_Call_Sec_Alpha_Id

64

2nd capability configuration parameter

TS 11.14, 5

R98

C210 AND C231

PD_Cap_Conf_Param

65

Sustained DISPLAY TEXT

TS 11.14, 5

R98

C211 AND C228

PD_Sustained_Displ_Txt

66

SEND DTMF command

TS 11.14, 5

R98

C231

PD_Send_DTMF

67

PROVIDE LOCAL INFORMATION – BCCH

TS 11.14, 5

R98

M

PD_Provide_Local_BCCH_List

68

PROVIDE LOCAL INFORMATION (language)

TS 11.14, 5

R99

C237

PD_Provide_Local_LS

69

PROVIDE LOCAL INFORMATION (Timing Advance)

TS 11.14, 5

R99

M

PD_Provide_Local_TA

70

LANGUAGE NOTIFICATION

TS 11.14, 5

R99

C238

PD_Lang_Notif

71

LAUNCH BROWSER

TS 11.14, 5

R99

C212 AND C228 AND C229

PD_Launch_Brws

72

RFU

TS 11.14, 5

R96

X

PD_RFU_72

73

Soft keys support for SELECT ITEM

TS 11.14, 5

R99

C213

PD_Softkey_Select_Item

74

Soft Keys support for SET UP MENU

TS 11.14, 5

R99

C213

PD_Softkey_SetUp _Menu

75

RFU

TS 11.14, 5

R96

X

PD_RFU_75

76

RFU

TS 11.14, 5

R96

X

PD_RFU_76

77

RFU

TS 11.14, 5

R96

X

PD_RFU_77

78

RFU

TS 11.14, 5

R96

X

PD_RFU_78

79

RFU

TS 11.14, 5

R96

X

PD_RFU_79

80

RFU

TS 11.14, 5

R96

X

PD_RFU_80

81

Maximum number of soft keys available (‘FF’ = RFU)

TS 11.14, 5

R99

C214

PD_Max_SoftKey

82

Maximum number of soft keys available (‘FF’ = RFU)

TS 11.14, 5

R99

C214

PD_Max_SoftKey

83

Maximum number of soft keys available (‘FF’ = RFU)

TS 11.14, 5

R99

C214

PD_Max_SoftKey

84

Maximum number of soft keys available (‘FF’ = RFU)

TS 11.14, 5

R99

C214

PD_Max_SoftKey

85

Maximum number of soft keys available (‘FF’ = RFU)

TS 11.14, 5

R99

C214

PD_Max_SoftKey

86

Maximum number of soft keys available (‘FF’ = RFU)

TS 11.14, 5

R99

C214

PD_Max_SoftKey

87

Maximum number of soft keys available (‘FF’ = RFU)

TS 11.14, 5

R99

C214

PD_Max_SoftKey

88

Maximum number of soft keys available (‘FF’ = RFU)

TS 11.14, 5

R99

C214

PD_Max_SoftKey

89

OPEN CHANNEL

TS 11.14, 5

R99

C223

PD_Open_Ch

90

CLOSE CHANNEL

TS 11.14, 5

R99

C223

PD_Close_Ch

91

RECEIVE DATA

TS 11.14, 5

R99

C223

PD_Rx_Data

92

SEND DATA

TS 11.14, 5

R99

C223

PD_Send_Data

93

GET CHANNEL STATUS

TS 11.14, 5

R99

C223

PD_Get_Ch_Status

94

RFU

TS 11.14, 5

R96

X

PD_RFU_94

95

RFU

TS 11.14, 5

R96

X

PD_RFU_95

96

RFU

TS 11.14, 5

R96

X

PD_RFU_96

97

CSD supported by ME

TS 11.14, 5

R99

C207

PD_CSD

98

GPRS supported by ME

TS 11.14, 5

R99

C222

PD_GPRS

99

RFU

TS 11.14, 5

R96

X

PD_RFU_99

100

RFU

TS 11.14, 5

R96

X

PD_RFU_100

101

RFU

TS 11.14, 5

R96

X

PD_RFU_101

102

Number of channels supported by ME

TS 11.14, 5

R99

C227

PD_Nb_Channel

103

Number of channels supported by ME

TS 11.14, 5

R99

C227

PD_Nb_Channel

104

Number of channels supported by ME

TS 11.14, 5

R99

C227

PD_Nb_Channel

105

Number of characters supported down the ME

TS 11.14, 5

R99

C234

PD_Nb_Char

106

Number of characters supported down the ME

TS 11.14, 5

R99

C234

PD_Nb_Char

107

Number of characters supported down the ME

TS 11.14, 5

R99

C234

PD_Nb_Char

108

Number of characters supported down the ME

TS 11.14, 5

R99

C234

PD_Nb_Char

109

Number of characters supported down the ME

TS 11.14, 5

R99

C234

PD_Nb_Char

110

No display capability (i.e class "ND" is indicated)

ETSI TS 102 223, cl. 5.2

Rel-8

C235

PD_Type_ND

111

No keypad available (i.e. class "NK" is indicated)

ETSI TS 102 223, cl. 5.2

Rel-8

C236

PD_Type_NK

112

Screen Sizing Parameters

TS 11.14, 5

R99

C216

PD_Screen_Siz

113

Number of characters supported across the ME display

TS 11.14, 5

R99

C234

PD_Nb_Char_Disp

114

Number of characters supported across the ME display

TS 11.14, 5

R99

C234

PD_Nb_Char_Disp

115

Number of characters supported across the ME display

TS 11.14, 5

R99

C234

PD_Nb_Char_Disp

116

Number of characters supported across the ME display

TS 11.14, 5

R99

C234

PD_Nb_Char_Disp

117

Number of characters supported across the ME display

TS 11.14, 5

R99

C234

PD_Nb_Char_Disp

118

Number of characters supported across the ME display

TS 11.14, 5

R99

C234

PD_Nb_Char_Disp

119

Number of characters supported across the ME display

TS 11.14, 5

R99

C234

PD_Nb_Char_Disp

120

Variable size fonts Supported

TS 11.14, 5

R99

C233

PD_Var_Font

121

Display can be resized

TS 11.14, 5

R99

C218

PD_Disp_Resiz

122

Text Wrapping supported

TS 11.14, 5

R99

C233

PD_Txt_Wrap

123

Text Scrolling supported

TS 11.14, 5

R99

C233

PD_Txt_Scroll

124

RFU

TS 11.14, 5

R96

X

PD_RFU_124

125

RFU

TS 11.14, 5

R96

X

PD_RFU_125

126

Width reduction when in a menu

TS 11.14, 5

R99

C234

PD_Width_Reduc

127

Width reduction when in a menu

TS 11.14, 5

R99

C234

PD_Width_Reduc

128

Width reduction when in a menu

TS 11.14, 5

R99

C234

PD_Width_Reduc

129

TCP

TS 11.14, 5

R99

C220

PD_TCP

130

UDP

TS 11.14, 5

R99

C221

PD_UDP

131

RFU

TS 11.14, 5

R96

X

PD_RFU_131

132

RFU

TS 11.14, 5

R96

X

PD_RFU_132

133

RFU

TS 11.14, 5

R96

X

PD_RFU_133

134

RFU

TS 11.14, 5

R96

X

PD_RFU_134

135

RFU

TS 11.14, 5

R96

X

PD_RFU_135

136

RFU

TS 11.14, 5

R96

X

PD_RFU_136

137

RFU

TS 11.14, 5

R96

X

PD_RFU_137

138

RFU

TS 11.14, 5

R96

X

PD_RFU_138

139

RFU

TS 11.14, 5

R96

X

PD_RFU_139

140

RFU

TS 11.14, 5

R96

X

PD_RFU_140

141

RFU

TS 11.14, 5

R96

X

PD_RFU_141

142

RFU

TS 11.14, 5

R96

X

PD_RFU_142

143

RFU

TS 11.14, 5

R96

X

PD_RFU_143

144

RFU

TS 11.14, 5

R96

X

PD_RFU_144

145

Protocol Version

TS 11.14, 5

R99

TBD

146

Protocol Version

TS 11.14, 5

R99

TBD

147

Protocol Version

TS 11.14, 5

R99

TBD

148

Protocol Version

TS 11.14, 5

R99

TBD

149

RFU

TS 11.14, 5

R96

X

PD_RFU_149

150

RFU

TS 11.14, 5

R96

X

PD_RFU_150

151

RFU

TS 11.14, 5

R96

X

PD_RFU_151

152

RFU

TS 11.14, 5

R96

X

PD_RFU_152

C201

Void

— Void

C202

Void

— Void

C203

C204

C205

C206

C207

C208

C209

C210

C211

C212

C213

C214

C215

C216

C217

C218

C219

C220

C221

C222

C223

C224

C225

C226

C227

C228

C229

C230

C231

C232

C233

C234

C235

C236

C237

C238

O.1

IF A.1/3 THEN M ELSE O.1

IF A.1/15 THEN M ELSE O.1

IF A.1/4 THEN M ELSE O.1

IF A.1/7 THEN M ELSE O.1

IF A.1/12 THEN M ELSE O.1

IF (A.1/7 AND A.1/8) THEN M ELSE O.1

IF A.1/9 THEN M ELSE O.1

IF A.1/1 THEN M ELSE O.1

IF A.1/2 THEN M ELSE O.1

IF A.1/10 THEN M ELSE O

IF A.1/11 THEN M for at least one of the bits 1 – 2 of byte 10

IF C213 THEN M for at least one, but not for all of the bits 1 – 8 of byte 11

Void

IF A.1/13 THEN M ELSE O.1

Void

IF A.1/14 THEN M ELSE O.1

Void

IF A.1/18 THEN M ELSE O.1

IF A.1/17 THEN M ELSE O.1

IF A.1/21 THEN M ELSE O.1

IF (C207 OR C222) THEN M ELSE O.1

IF A.1/27 THEN M ELSE O.1

IF A.1/28 THEN M ELSE O.1

IF A.1/29 THEN M ELSE O.1

IF (C207 OR C222) THEN M for at least one of the bits 6 – 8 of byte 13

IF A.1/45 THEN M ELSE O.1

IF A.1/46 THEN M ELSE O.1

IF A.1/47 THEN M ELSE O.1

IF A.1/48 THEN M ELSE O.1

IF (A.1/49 AND A.1/97) THEN M ELSE O.1

IF A.1/45 THEN O ELSE O.1

IF A.1/45 THEN bit values "0" / "1" allowed ELSE O.1

IF A.1/45 THEN O.1 ELSE M

IF A.1/46 THEN O.1 ELSE M

IF A.1/98 THEN M ELSE O.1

IF (A.1/49 AND A.1/99) THEN M ELSE O.1

Allowed: Bit value ="0" or bit not present

— O_Ucs2_Entry

— O_Ucs2_Disp

— O_Ext_Str

— O_Dual_Slot

— O_BIP_CSD

— O_Dual_Slot AND O_Detach_Rdr

— O_Run_At

— O_Cap_Conf

— O_sust_text

— O_LB

— O_Softkey

— O_Softkey (parameters)

— Void

— O_Scr_Siz

— Void

— O_Scr_Resiz

— Void

— O_TCP

— O_UDP

— O_BIP_GPRS

— O_BIP_CSD OR O_BIP_GPRS

— O_9EXX

— O_CC_Auto_Redial

— O_SetUp_Call_Sec_Alpha_Id

— O_BIP_CSD OR O_BIP_GPRS

— O_No_Type_ND

— O_No_Type_NK

— O_No_Type_NA

— O_No_Type_NS

— O_No_Type_NL AND O_Lang_Select

— O_No_Type_ND

— O_No_Type_ND

— O_No_Type_ND

— O_No_Type_NK

— O_Provide_Local_LS

— O_No_Type_NL AND O_Lang_Notif

Comments:

This static requirement for the TERMINAL PROFILE is specifying the bit coding of this command. In the support column a "Yes" (or "Y" or "y") means bit coding "1" and a "No" (or "N" or "n") and "X" means bit coding "0" in the command.

Annex F (informative):
Change History

Change history

Date

Meeting

TDoc

CR

Rev

Cat

Subject/Comment

New version

SMG#30

–

–

–

Approved as release 1996 at SMG#30

5.0.0

A001

–

Corrections to SIM Application Toolkit Test Specification

5.1.0

–

Version update to 5.1.1 for Publication

5.1.1

A002

–

Editorial and coding corrections

5.2.0

A003

–

Correction of wrong coding for SIM Application Toolkit test 27.22.4.2

5.3.0

A004

–

Corrections for Test Case 27.22.5.1 (SMS-PP Data Download)

5.3.0

A005

–

Correction of wrong coding for SIM Application Toolkit 27.22

5.4.0

A006

–

Corrections for Test Case 27.22.4.7 (REFRESH)

5.5.0

A007

–

Corrections for Test Case 27.22.5.2 (SMS-CB Data Download)

5.5.0

A008

–

Upgrade of the MS SAT test specification to Release 99

8.1.0

A010r1

–

Addition of Terminal Profile information, suppression of PLAY TONE Test sequence 1.2

8.2.0

A011

–

References to 11.10-1 replaced. Reference to 11.10-2 removed.

8.3.0

A012

–

Corrections to Send Short Message, Sequence 1.4

8.4.0

A013

–

Redial in Set Up Call

8.4.0

A014

–

Correction to Terminal Response: Set Up Call 1.7.1

8.4.0

A015

–

Select Item: Support of "No response from user"

8.4.0

A016

–

Correction of Emergency Call test cases

8.4.0

A017

–

Essential corrections to default values for SIM Application Toolkit testing

A018

–

Clarification on comprehension required flag usage

8.5.0

A019

–

Essential corrections to Display text test cases

A020

–

Essential corrections to Get Inkey test cases

A021

–

Essential corrections to Get Input test cases

8.5.0

A022

–

Essential corrections to Set Up Menu test cases

A023

–

Essential corrections to Play Tone test cases

A024

–

Essential corrections to Poll Intervall test case

A025

–

Essential corrections to Polling off test case

8.5.0

A026

–

Essential corrections to Provide Local Information test cases

8.5.0

A027

–

Essential corrections to Send Short message test cases

8.5.0

A028

–

Essential corrections to Language Notification test cases

8.5.0

A029

–

Essential corrections to Send SS test cases

A030

–

Essential corrections to Set Up Call test cases

8.5.0

A031

–

Essential corrections to Send USSD test cases

A032

–

Essential correction to Set Up Idle Mode Text test cases

8.5.0

A033

–

Essential corrections to Power Off Card test case

A034

–

Essential corrections to Perform Card APDU test cases

A035

–

Essential correction to Get Reader Status test cases

A036

–

Essential corrections to Send DTMF test cases

A037

–

Essential corrections to CALL CONTROL BY SIM test cases

8.5.0

A038

–

Essential corrections to CALL CONTROL BY SIM (Interaction with FDN/ BDN) test cases

8.5.0

A039

–

Essential corrections to Select Item test cases

A040

–

Essential corrections to card reader status event download test cases

A041

–

Essential corrections to language selection and browser termination event download test cases

8.5.0

A042

–

Essential corrections to Close Channel test cases

8.5.0

A043

–

Essential corrections to Launch Browser test cases

8.5.0

A044

–

Essential corrections to Open Channel test cases

A045

–

Essential corrections to Receive Data test cases

A046

–

Essential corrections to Send Data test cases

A047

–

Essential corrections to channel status event download test case

A048

–

Essential corrections to Get Channel Status test cases

A049

–

Essential corrections to CB data download test cases

A050

–

Essential corrections to location status, user activity and idle screen available event download test cases

8.5.0

A051

–

Corrections in the REFRESH test sequences (with inclusion of T3-030535’s contents)

8.5.0

A052

–

Essential corrections to test requirement references

8.5.0

A053

–

Essential corrections to CALL CONTROL BY SIM (supplementary services) test case

A054

–

Essential corrections to MT Call, Call connected and Call disconnected event download test cases

8.5.0

A055

–

Introduction of “MO Short Message Control by SIM” envelope testing

8.6.0

A056

–

Re-Introduction of changes already approved at the last T3.

8.6.0

A057

–

Essential corrections

8.6.0

A058

–

Essential corrections to 27.22.4.14 “POLLING OFF”

8.6.0

A059

–

Essential corrections to Send DTMF test cases

8.6.0

A060

–

Introduction of BIP testing in GPRS

8.6.0

A061

–

Correction of image instance descriptor for colour icons

8.7.0

A062

–

Essential correction on Terminal Profile for the BIP

Inclusion of tests on Open Channel for GPRS, on the user confirmation

8.7.0

A063

–

CR 11.10-4 Launch Browser test cases

8.7.0

A064

–

CR 11.10-4 R99: Essential corrections

8.7.0

A065

–

CR 11.10-4 R99: Essential correction of coding convention

8.7.0

A071

–

Correction of Cell Broadcast message download test

8.8.0

A066

–

Essential corrections

8.8.0

A067

–

Support of GSM 700, GSM 850 and PCS 1900

8.8.0

A068

–

Corrections of applicability table

8.8.0

A070

–

Correction on allowing optional parameters in ENVELOPE(CALL CONTROL) command for call set-ups when testing Call Control procedures

8.8.0

A069

–

Essential corrections to Call Control test cases

8.8.0

A076

–

Essential corrections of Event Download test cases

8.9.0

A073

–

Essential corrections

8.9.0

A072

–

Clarification of call hang up in 27.22.4.5 Play Tone

8.9.0

A074

–

Removal of misleading comment from Refresh SIM Reset tests

8.9.0

A075

–

Correction of poll interval related tests

8.9.0

A077

–

Correction of Send Short Message test case

8.10.0

A078

–

Correction of Select Item test case

8.10.0

A079

–

Correction of Language Notification test case

8.10.0

A080

–

Correction of Select Item (Next action identifier) test case

8.10.0

A081

–

Correction of PROFILE DOWNLOAD test case – incorrect P2

8.10.0

A082

–

Correction of CALL CONTROL test cases

8.10.0

A083

–

Incorrect specification of file codings

8.10.0

A084

–

Correction of Refresh test case

8.10.0

A085

–

Correction of MO SM CONTROL BY SIM test case

8.10.0

A086

–

Correction of Errors

8.10.0

A087

–

Clarification of PLAY TONE test case

8.10.0

A088

–

Clarification of RECEIVE DATA test case

8.10.0

A089

–

Corrections for Test Case 27.22.5.1 (SMS-PP Data Download)

8.10.0

A090

–

Modification of 27.22.1 PROFILE DOWNLOAD

8.10.0

A091

–

Correction of Set Up Idle Mode Text test case

8.10.0

A092

–

Correction of Timer Management test cases

8.10.0

A093

–

Essential Corrections on Launch Browser

8.10.0

TP-27

T3-050096

A094

–

Correction of terminal profile test

8.11.0

TP-27

T3-050097

A095

–

Correction of Set Up Call test

8.11.0

TP-27

T3-050098

A096

–

Essential Corrections

8.11.0

TP-27

T3-050099

A097

–

Correction of Call Connected Event test

8.11.0

TP-27

T3-050100

A098

–

Correction of Call Control test cases

8.11.0

TP-27

T3-050125

A099

–

Corrections of references

8.11.0

TP-27

T3-050155

A100

–

Clarification on LAUNCH BROWSER test case

8.11.0

TP-27

T3-050194

A101

–

Correction of network related tests

8.11.0

TP-27

T3-050195

A102

–

Correction of Timer Management test

8.11.0

TP-27

T3-050196

A103

–

Correction of coding of SS RETURN RESULT in 27.22.4.12 SEND USSD

8.11.0

TP-27

T3-050197

A104

–

Correction of Expected sequence 2.4 in section 27.22.4.22.2.4 SET UP IDLE MODE TEXT (icon support)

8.11.0

TP-27

T3-050198

A105

–

Correction on Timer Management test cases

8.11.0

CT-28

C6-050354

A106

–

Correction of coding in MT Call Even

8.12.0

CT-28

C6-050381

A107

–

Essential corrections

8.12.0

CT-28

C6-050382

A109

–

Too many digits in PCS 1900 for the Called Party BCD number

8.12.0

CT-29

C6-050629

A110

–

CR 11.10-4: Correction of applicability and terminal profile support tables

8.13.0

CT-29

C6-050631

A111

–

CR 11.10-4: Correction of Refresh tests

8.13.0

CT-29

C6-050632

A112

–

CR 11.10-4: Correction of EF_BDN coding

8.13.0

CT-29

C6-050634

A127

–

CR 11.10-4 R99: Essential correction to Terminal Profile table E.1

8.13.0

CT-29

C6-050636

A113

–

CR 11.10-4: Incorrect Dialling Number string in clause 27.22.4.13.1 SEQ 1.9 for PCS 1900

8.13.0

CT-29

C6-050640

A115

–

CR 11.10-4: Incorrect Ti Flag value for SET UP 1.4.1 in clause 27.22.4.16.1

8.13.0

CT-29

C6-050642

A116

–

CR 11.10-4: Correction of TP-MR (TP Message Reference) of the SMS SUBMIT TPDU submitted to the SS (Network)

8.13.0

CT-29

C6-050644

A117

–

CR 11.10-4: Corrections in the Logical description and BER encoding in clause 27.22.6.2 and 27.22.4.11

8.13.0

CT-29

C6-050646

A118

–

CR 11.10-4: Incorrect DCS in SMS-CB data download tests

8.13.0

CT-29

C6-050662

A119

–

CR 11.10-4: Essential Corrections in clause 27.22.8 MO SHORT MESSAGE CONTROL BY SIM

8.13.0

CT-29

C6-050664

A120

–

CR 11.10-4: Essential Corrections

8.13.0

CT-29

C6-050671

A121

–

CR 11.10-4 R99: Essential corrections in clause 27.22.4.7.2 REFRESH (IMSI changing procedure)

8.13.0

CT-29

C6-050672

A122

–

CR 11.10-4 R99: Incorrect SMS-PP 1.4.1 TPDU in clause 27.22.4.22.1

8.13.0

CT-29

C6-050674

A123

–

CR 11.10-4 R99: Missing interactions in Bearer Independent Protocol test cases

8.13.0

CT-29

C6-050669

A124

–

CR 11.10-4 R99: Applicability of TC 27.22.4.7.1 and TCs related to FDN and BDN

8.13.0

CT-29

C6-050703

A126

–

Correction of CB message identifier

8.13.0

CT-29

C6-050714

A125

–

Essential corrections in display icons Setup Menu and Select Item

8.13.0

–

–

–

–

editorial corrections due to the CRs approved at CP-29

8.13.1

CT-30

CP-050483

A114

–

Corrections of Set Up Call (second alpha identifier) test

8.14.0

CT-30

CP-050483

A129

–

Essential Corrections of Set Up Menu test

8.14.0

CT-30

CP-050483

A130

–

Essential Corrections in clause 27.22.4.11

8.14.0

CT-30

CP-050483

A131

–

Corrections to Select Item (icons support)

8.14.0

CT-30

CP-050483

A132

–

27.22.7.4.1 Location Status Event (normal)

8.14.0

CT-30

CP-050483

A134

–

Correction of applicability table

8.14.0

CT-30

CP-050483

A135

–

Correction in SMS-PP 1.4.1 TPDU of clause 27.22.4.22.1

8.14.0

CT-30

CP-050483

A136

–

Essential Corrections of SMS-PP download message in Refresh test case

8.14.0

CT-30

CP-050483

A137

–

Essential Correction in MO SHORT MESSAGE CONTROL BY SIM Deletion of sequence 1.9

8.14.0

CT-30

CP-050483

A138

–

Deletion of SEQ 1.3 in clause 27.22.4.13.1

8.14.0

CT-31

CP-060014

A148

–

Essential Corrections in clause 27.22.4.11

8.15.0

CT-31

CP-060014

A151

–

Essential Corrections in clause 27.22.8 MO SHORT MESSAGE CONTROL BY SIM

8.15.0

CT-31

CP-060014

A147

–

Essential correction in SEQ 1.4 of clause 27.22.4.11.1 SEND SS (normal)

8.15.0

CT-31

CP-060014

A146

–

Essential corrections of Run AT Command tests

8.15.0

CT-31

CP-060014

A152

–

Essential corrections to SET UP CALL test sequences

8.15.0

CT-31

CP-060012

A158

–

Essential correction of Refresh IMSI changing tests

8.15.0

CT-31

CP-060012

A141

–

Essential correction of UCS2 related test case applicability

8.15.0

CT-31

CP-060012

A142

–

Removal of SEQ 2.2 in clause 27.22.4.12.2

8.15.0

CT-31

CP-060012

A150

–

Essential correction of Channel Data length in SEQ 1.1 of clause 27.22.4.30

8.15.0

CT-31

CP-060012

A145

–

Essential correction of SMS-CB (data download) tests

8.15.0

CT-31

CP-060013

A139

–

Deletion of Send Data test sequence

8.15.0

CT-31

CP-060013

A140

–

Essential correction of Provide Local Information (IMEI) test

8.15.0

CT-31

CP-060013

A143

–

Essential Correction in SEQ 1.8 of clause 27.22.8

8.15.0

CT-31

CP-060013

A144

–

Essential correction on 27.22.7.3.1 Call Disconnected Event

8.15.0

CT-31

CP-060013

A149

–

Essential correction of Channel Data length in clause 27.22.4.30

8.15.0

CT-31

CP-060015

A154

–

Essential Correction in TERMINAL RESPONSE coding of clause 27.22.4.31

8.15.0

CT-31

CP-060015

A156

–

Essential corrections to Timer Expiration tests

8.15.0

CT-31

CP-060015

A153

–

BER-TLV suppressions

8.15.0

CT-31

CP-060016

A155

–

Creation of a new TS 51.10-4, Rel-4 specification coming from TS 11.10-4 R99

51.010-4v4.0.0

CT-32

CP-060236

0001

–

Essential correction to prevent optional ME features being mandatorily tested

4.1.0

CT-32

CP-060236

0004

–

Essential correction of Language Selection Event test

4.1.0

CT-32

CP-060242

0002

–

Essential correction of BIP tests

4.1.0

CT-32

CP-060242

0003

–

Essential Correction in REGISTER 1.2B message coding of clause 27.22.4.11.1 SEND SS (normal)

4.1.0

CT-32

CP-060242

0005

–

Essential correction of 27.22.4.13.1 SET UP CALL, seq 1.4

4.1.0

CT-32

CP-060242

0006

–

Essential correction of second card reader test applicability

4.1.0

CT-32

CP-060242

0007

–

Correction of TON/NPI coding for Call Control Test case

4.1.0

CT-32

CP-060242

0008

–

Essential corrections on 27.22.4.11.1 sequence. 1.2

4.1.0

CT-33

CP-060382

0016

1

Essential correction of GET INPUT test

4.2.0

CT-33

CP-060382

0018

1

Essential correction of SEND DATA test

4.2.0

CT-33

CP-060382

0019

1

Correction of various typographical errors

4.2.0

CT-33

CP-060382

0010

2

Essential correction of BIP test cases

4.2.0

CT-33

CP-060517

0012

1

Essential corrections Set Up Call, seq. 1.9

4.2.0

CT-33

CP-060475

0014

1

Essential corrections of MMI entries in table E.1

4.2.0

CT-33

CP-060475

0009

1

Corrections to SET UP CALL test case 27.22.4.13.1

4.2.0

CT-33

CP-060475

0020

2

Essential corrections to SEND SS concerning longForwardedToNumber

4.2.0

CT-33

CP-060475

0017

2

Corrections to MO SHORT MESSAGE CONTROL BY SIM tests

4.2.0

CT-34

CP-060539

0023

–

Essential corrections on TC 27.22.4.29, sequence 1.1

4.3.0

CT-34

CP-060540

0021

–

Correction of APN Coding in Open Channel test case

4.3.0

CT-34

CP-060540

0013

2

Essential corrections of BIP entries in table E.1

4.3.0

CT-34

CP-060540

0022

2

Essential correction of Result TLV handling

4.3.0

CT-34

CP-060540

0024

1

Essential correction of expected sequence in OPEN CHANNEL test case

4.3.0

CT-35

CP-070062

0032

Essential correction of Send USSD applicability

4.4.0

CT-35

CP-070062

0030

1

Essential correction of GPRS QoS parameter in BIP tests

4.4.0

CT-35

CP-070062

0036

1

Test execution recommendation for terminals supporting both, SAT and USAT

4.4.0

CT-35

CP-070063

0029

Essential correction of 27.22.5.2

4.4.0

CT-35

CP-070063

0027

1

Essential correction of Terminal Profile Support table

4.4.0

CT-35

CP-070063

0026

1

Essential correction of 27.22.4.13.1 Expected Sequence 1.7

4.4.0

CT-36

CP-070290

0037

–

Correction of reference to ISO/IEC 7816-3

4.5.0

CT-36

CP-070290

0038

1

Essential correction of test case applicability for 27.22.6.1

4.5.0

CT-36

CP-070290

0039

1

Essential correction on 27.22.8

4.5.0

–

–

–

–

MCC Table formatting throughout document (reduces page count)

4.5.0

CT-37

CP-070609

0040

–

Essential correction to 27.22.8

4.6.0

CT-37

CP-070610

0041

1

Essential correction of 27.22.6.2

4.6.0

CT-37

CP-070610

0042

–

Essential correction of 27.22.4.13.1, seq. 1.9

4.6.0

CT-37

CP-070609

0043

–

Essential Correction to insert a missing Carriage Return

4.6.0

CT-38

CP-070843

0044

1

Essential correction of 27.22.4.7.1, seq. 1.6

4.7.0

CT-38

CP-070843

0045

1

Essential correction of 27.22.8, seq. 1.3

4.7.0

CT-38

CP-070843

0046

1

Essential correction of 27.22.4.26.2.4.2, seq. 2.2

4.7.0

CT-38

CP-070843

0047

–

Correction to add optional support of Call Hold Supplementary Service

4.7.0

CT-39

CP-080170

0048

1

Essential correction to network dependency of several tests

4.8.0

CT-40

CP-080389

0050

1

Essential correction of icon test case applicability

4.9.0

CT-40

CP-080389

0052

3

Essential correction of test case applicability of 27.22.6.2 and 27.22.4.11

4.9.0

CT-41

CP-080590

0053

1

Essential correction of TC 27.22.4.11.1 Seq. 1.4B

4.10.0

CT-42

CP-080948

0055

–

Essential correction of TC 27.22.7.8.1 network dependency

4.11.0

CT-42

CP-080948

0056

–

Essential correction of GPRS QoS parameter in browser tests

4.11.0

CT-42

CP-080948

0056

–

Essential correction of 27.22.4.26.2 Seq. 2.2

4.11.0

CT-42

CP-080948

0056

–

Pre-conditions for Launch browser

4.11.0

CT-43

CP-080189

0059

 

Essential correction to 27.22.4.3.6 (GET INPUT (display of Icon)), sequence 6.1A

4.12.0

CT-43

CP-080189

0060

 

Essential correction to 27.22.4.11.2 and 27.22.4.11.3 (SEND SS)

4.12.0

CT-43

CP-080189

0061

 

Essential correction to 27.22.4.31 (GET CHANNEL STATUS) sequence 1.3

4.12.0

CT-43

CP-080189

0062

 

Essential correction 27.22.4.14 (POLLING OFF)

4.12.0

CT-43

CP-080189

0063

1

Essential correction to BIP tests – usage of ME’s default channel identifier

4.12.0

CT-44

CP-090460

0064

1

Test case and test case applicability changes for terminals with reduced SAT capabilities

4.13.0

CT-45

CP-090720

0066

 

Essential correction of applicability and terminal profile table

4.14.0

CT-45

CP-090720

0065

3

Essential correction to icon test applicability

4.14.0

——–

—————

–

–

Correction of misimplementation of CR 0064

4.14.1

CT-47

CP-100179

0067

1

Correction of typo error

4.15.0

CT-47

CP-100179

0069

–

Essential correction to the condition table

4.15.0

CT-47

CP-100179

0068

–

Correction of applicability for ‘no alpha identifier presented’ sequences

4.15.0

CT-49

CP-100591

0071

1

Essential correction of Table E.1 regarding ‘Width reduction when in a menu’

4.16.0

CT-49

CP-100591

0073

1

Essential correction to test case applicability of letter class C features

4.16.0

CT-49

CP-100591

0072

3

Essential correction to Open Channel 27.22.4.27.2 sequence 2.4 test

4.16.0

CT-49

CP-100619

0070

1

Essential correction of test 27.22.4.9.3

4.16.0

CT-50

CP-100833

0074

–

Essential correction of the applicability of test 27.22.4.22.1 Seq. 1.4

4.17.0

CT-50

CP-100833

0076

1

Clarification of ‘ELSE’ parts in Table E.1

4.17.0

CT-51

CP-110229

0077

–

Correction of Send Short Message test case redundancy

4.18.0

CT-52

CP-110505

0078

–

Correction of Additional test Execution Recommendation AER002 due to incorrect implementation of CR 0077

4.19.0

CT-53

CP-110592

0080

1

Essential correction of Data Destination Address settings in BIP and Launch Browser tests

4.20.0

CT-54

CP-110906

0081

1

Essential correction to SMS-CB Applicability

4.21.0

CT-54

CP-110906

0079

2

Essential correction to Play Tone test

4.21.0

CT-54

CP-110906

0083

1

Correction to the condition ID of Table B.1

4.21.0

CT-55

CP-120151

0084

1

Test applicability correction of Open Channel with user rejection tests

4.22.0

CT-56

CP-120394

0085

2

Test applicability correction for terminals operating in PS mode

4.23.0

CT-56

CP-120394

0086

1

Correction of expected Terminal Reponse for unsuccessful Open Channel commands

4.23.0

CT-57

CP-120628

0087

2

Modification of the initial conditions for clause 27.22.4.7.1

4.24.0

CT-57

CP-120629

0088

2

Essential correction of Launch Browser tests

4.24.0

CT-57

CP-120629

0090

2

Essential correction of Launch Browser tests

4.24.0

CT-59

CP-130149

0092

1

Applicability of tests for MEs with reduced capabilities

4.25.0

CT-60

CP-130373

0093

Correction to Applicability of test case 27.22.4.1, seq. 4.4

4.26.0

CT-60

CP-130373

0094

2

Changes in LAUNCH BROWSER test cases

4.26.0

CT-62

CP-130793

0097

Essential correction for Applicability table related to Open Channel sequence 2.8

4.27.0

CT-64

CP-140419

0106

1

Creation of Rel-12

12.0.0

CT-64

CP-140421

0098

1

Essential correction of mismatch between proactive command coding and expected text to be displayed.

12.0.0

CT-65

CP-140704

0109

1

Usage of URL in test cases for LAUNCH BROWSER command

12.1.0

CT-65

CP-140704

0110

1

Corrections of the Text String coding format and General Result reference

12.1.0

CT-65

CP-140704

0111

1

Addition of test case applicability for Rel-4

12.1.0

CT-66

CP-140965

0112

1

Change of test sequence for LAUNCH BROWSER with default URL

12.2.0

SP-70

Automatic upgrade to Rel-13

13.0.0

CT-73

CP-160548

0114

1

Relaxing the mandatory clause and making features optional

13.1.0

CT-74

CP-160791

0115

1

Correction of test case for Location status event

13.2.0

SA-75

–

–

Update to Rel-14 version (MCC)

14.0.0

CT-77

CP-172064

0117

Correction of AT Response in test cases for RUN AT COMMAND

14.1.0

CT-78

CP-173150

0118

1

Correction of AT Command in test cases for RUN AT COMMAND

14.2.0

CT-78

CP-173150

0119

–

Correction of wrong implementation of CR 0114

14.2.0

SA-80

Automatic upgrade to Rel-15

15.0.0

CT-82

CP-183142

0120

1

Editorial correction to 27.22.4.22.1 Seq. 1.7

15.1.0

2019-12

CP-193073

0121

1

Correction of wrong implementation of CR 0114

15.2.0

SA-88e

Automatic upgrade to Rel-16

16.0.0

2020-09

CP-202130

0122

2

Update of spec. reference

16.1.0

2022-04

–

–

–

–

–

Update to Rel-17 version (MCC)

17.0.0