27.22.6 CALL CONTROL BY SIM
3GPP51.010-4Mobile Station (MS) conformance specificationPart 4: Subscriber Identity Module (SIM) application toolkit conformance test specificationRelease 17TS
27.22.6.1 Procedure for Mobile Originated calls
27.22.6.1.1 Definition and applicability
See clause 3.2.2.
27.22.6.1.2 Conformance requirement
The ME shall support the CALL CONTROL facility as defined in:
– TS 11.14 [15] clause 9.1.1.
27.22.6.1.3 Test purpose
To verify that for all call set-up attempts , even those resulting from a SET UP CALL proactive SIM command, the ME shall first pass the call set-up details (dialled digits and associated parameters) to the SIM, using the ENVELOPE (CALL CONTROL).
To verify that if the SIM responds with ’90 00′, the ME shall set up the call with the dialled digits and other parameters as sent to the SIM.
To verify that if the SIM responds with ‘9F XX’, the ME shall use the GET RESPONSE command to get the response data. The response data from the SIM shall indicate to the ME whether to set up the call as proposed, not set up the call, set up a call using the data supplied by the SIM.
To verify that, in the case where the initial call set-up request results from a proactive SET UP CALL, if the call control result is "not allowed" or "allowed with modifications", the ME shall inform the SIM using TERMINAL RESPONSE "interaction with call control by SIM or MO short message control by SIM, action not allowed".
To verify that it is possible for the SIM to request the ME to set up an emergency call by supplying the number "112" as the response data.
27.22.6.1.4 Method of tests
27.22.6.1.4.1 Initial conditions
The ME is connected to the SIM Simulator and System Simulator and has performed the location update procedure.
The GSM parameters of the system simulator are:
– Mobile Country Code (MCC) = 001;
– Mobile Network Code (MNC) = 01;
– Location Area Code (LAC) = 0001;
– Cell Identity value = 0001.
The PCS 1900 parameters of the system simulator are:
– Mobile Country Code (MCC) = 001;
– Mobile Network Code (MNC) = 011;
– Location Area Code (LAC) = 0001;
– Cell Identity value = 0001.
Prior to this test the ME shall have been powered on and performed the PROFILE DOWNLOAD procedure.
The elementary files are coded as SIM Application Toolkit default with the following exception:
The call control service is allocated and activated in the SIM Service Table.
27.22.6.1.4.2 Procedure
Expected Sequence 1.1 (CALL CONTROL BY SIM , set up call attempt by user, the SIM responds with ’90 00′)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
Set up a call to "+01234567890123456789" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 1.1.1A Or ENVELOPE CALL CONTROL 1.1.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
90 00 |
|
|
4 |
ME SS |
The ME sets up the call without modification |
[Set up call to "+01234567890123456789" |
ENVELOPE CALL CONTROL 1.1.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "01234567890123456789"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
0B |
91 |
10 |
32 |
54 |
|
76 |
98 |
10 |
32 |
54 |
76 |
98 |
Note 2 |
Note 3 |
13 |
07 |
00 |
|
|
F1 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 1.1.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "01234567890123456789"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
0B |
91 |
10 |
32 |
54 |
|
76 |
98 |
10 |
32 |
54 |
76 |
98 |
Note 2 |
Note 3 |
13 |
07 |
00 |
|
|
11 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ‘1A’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
Expected Sequence 1.2 (CALL CONTROL BY SIM , set up call attempt by user, allowed without modification)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
Set up a call to "+01234567890123456789" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 1.2.1 A or ENVELOPE CALL CONTROL 1.2.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 02 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 1.2.1 |
[Call control result: "Allowed, no modification"] |
|
6 |
ME SS |
The ME sets up the call without modification |
[Set up call to "+01234567890123456789"] |
ENVELOPE CALL CONTROL 1.2.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "01234567890123456789"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
0B |
91 |
10 |
32 |
54 |
|
76 |
98 |
10 |
32 |
54 |
76 |
98 |
Note 2 |
Note 3 |
13 |
07 |
00 |
|
|
F1 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 1.2.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "01234567890123456789"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
0B |
91 |
10 |
32 |
54 |
|
76 |
98 |
10 |
32 |
54 |
76 |
98 |
Note 2 |
Note 3 |
13 |
07 |
00 |
|
|
11 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ‘1A’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
CALL CONTROL RESULT 1.2.1
Logically:
Call control result : ’00’ = Allowed, no modification
Coding:
|
BER-TLV: |
00 |
00 |
Expected Sequence 1.3A (CALL CONTROL BY SIM , set up call attempt resulting from a set up call proactive command, allowed without modification)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
SIM ME |
PROACTIVE COMMAND: SET UP CALL 1.3.1 PENDING |
[This test applies to MEs asking for user confirmation before sending the ENVELOPE CALL CONTROL command] |
|
2 |
MESIM |
FETCH |
|
|
3 |
SIM ME |
PROACTIVE COMMAND: SET UP CALL 1.3.1 |
[Set up call to "+012340123456"] |
|
4 |
ME → USER |
ME displays "+012340123456" during user confirmation phase. |
|
|
5 |
USER → ME |
The user confirms the call set up |
[user confirmation] |
|
6 |
ME SIM |
ENVELOPE CALL CONTROL 1.3.1A or ENVELOPE CALL CONTROL 1.3.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
7 |
SIM ME |
9F 02 |
|
|
8 |
ME SIM |
GET RESPONSE |
|
|
9 |
SIM ME |
CALL CONTROL RESULT 1.3.1 |
[Call control result: "Allowed, no modification"] |
|
10 |
ME SS |
The ME sets up the call without modification |
[Set up call to "+012340123456"] |
|
11 |
ME SIM |
TERMINAL RESPONSE: SET UP CALL 1.3.1 |
[command performed successfully] |
Expected Sequence 1.3 B (CALL CONTROL BY SIM , set up call attempt resulting from a set up call proactive command, allowed without modification)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
SIM ME |
PROACTIVE COMMAND: SET UP CALL 1.3.1 PENDING |
[This test applies to MEs asking for user confirmation after sending the ENVELOPE CALL CONTROL command] |
|
2 |
MESIM |
FETCH |
|
|
3 |
SIM ME |
PROACTIVE COMMAND: SET UP CALL 1.3.1 |
[Set up call to "+012340123456"] |
|
4 |
ME SIM |
ENVELOPE CALL CONTROL 1.3.1A or ENVELOPE CALL CONTROL 1.3.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
5 |
SIM ME |
9F 02 |
|
|
6 |
ME SIM |
GET RESPONSE |
|
|
7 |
SIM ME |
CALL CONTROL RESULT 1.3.1 |
[Call control result: "Allowed, no modification"] |
|
8 |
ME → USER |
ME displays "+012340123456" during user confirmation phase. |
|
|
9 |
USER → ME |
The user confirms the call set up |
[user confirmation] |
|
10 |
ME SS |
The ME sets up the call without modification |
[Set up call to "+012340123456"] |
|
11 |
ME SIM |
TERMINAL RESPONSE: SET UP CALL 1.3.1 |
[command performed successfully] |
PROACTIVE COMMAND: SET UP CALL 1.3.1
Logically:
Command details
Command number: 1
Command type: SET UP CALL
Command qualifier: Only if not currently busy on another call
Device identities
Source device: SIM
Destination device: Network
Alpha identifier: "+012340123456"
Address
TON: International
NPI: "ISDN / telephone numbering plan"
Dialling number string "012340123456"
Coding:
|
BER-TLV: |
D0 |
21 |
81 |
03 |
01 |
10 |
00 |
82 |
02 |
81 |
83 |
|
05 |
0D |
2B |
30 |
31 |
32 |
33 |
34 |
30 |
31 |
32 |
|
|
33 |
34 |
35 |
36 |
86 |
07 |
91 |
10 |
32 |
04 |
21 |
|
|
43 |
65 |
ENVELOPE CALL CONTROL 1.3.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "012340123456"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
02 |
02 |
82 |
81 |
06 |
07 |
91 |
10 |
32 |
|
04 |
21 |
43 |
65 |
Note 2 |
Note 3 |
13 |
07 |
00 |
F1 |
10 |
|
|
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 1.3.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "012340123456"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
02 |
02 |
82 |
81 |
06 |
07 |
91 |
10 |
32 |
|
04 |
21 |
43 |
65 |
Note 2 |
Note 3 |
13 |
07 |
00 |
11 |
10 |
|
|
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ’16’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
CALL CONTROL RESULT 1.3.1
Logically:
Call control result : ’00’ = Allowed, no modification
Coding:
|
BER-TLV: |
00 |
00 |
TERMINAL RESPONSE: SET UP CALL 1.3.1
Logically:
Command details
Command number: 1
Command type: SET UP CALL
Command qualifier: Only if not currently busy on another call
Device identities
Source device: ME
Destination device: SIM
Result
General Result: Command performed successfully
Coding:
|
BER-TLV: |
81 |
03 |
01 |
10 |
00 |
82 |
02 |
82 |
81 |
83 |
01 |
00 |
Expected Sequence 1.4 (CALL CONTROL BY SIM , set up call attempt by user, not allowed)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
Set up a call to "+01234567890123456789" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 1.4.1 A or ENVELOPE CALL CONTROL 1.4.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 02 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 1.4.1 |
[Call control result: "not Allowed"] |
|
6 |
ME SS |
The ME does not set up the call |
ENVELOPE CALL CONTROL 1.4.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "+01234567890123456789"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
0B |
91 |
10 |
32 |
54 |
|
76 |
98 |
10 |
32 |
54 |
76 |
98 |
Note 2 |
Note 3 |
13 |
07 |
00 |
|
|
F1 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 1.4.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "+01234567890123456789"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
0B |
91 |
10 |
32 |
54 |
|
76 |
98 |
10 |
32 |
54 |
76 |
98 |
Note 2 |
Note 3 |
13 |
07 |
00 |
|
|
11 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ‘1A’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
CALL CONTROL RESULT 1.4.1
Logically:
Call control result: ’01’ = not Allowed
Coding:
|
BER-TLV: |
01 |
00 |
Expected Sequence 1.5A (CALL CONTROL BY SIM , set up call attempt resulting from a set up call proactive command, not allowed)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
SIM ME |
PROACTIVE COMMAND: SET UP CALL 1.5.1 PENDING |
[This test applies to MEs asking for user confirmation before sending the ENVELOPE CALL CONTROL command] |
|
2 |
MESIM |
FETCH |
|
|
3 |
SIM ME |
PROACTIVE COMMAND: SET UP CALL 1.5.1 |
[Set up call to "+012340123456" |
|
4 |
ME → USER |
ME displays "+012340123456" during user confirmation phase. |
|
|
5 |
USER → ME |
The user confirms the call set up |
[user confirmation] |
|
6 |
ME SIM |
ENVELOPE CALL CONTROL 1.5.1A or ENVELOPE CALL CONTROL 1.5.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
7 |
SIM ME |
9F 02 |
|
|
8 |
ME SIM |
GET RESPONSE |
|
|
9 |
SIM ME |
CALL CONTROL RESULT 1.5.1 |
[Call control result: "Not Allowed"] |
|
10 |
ME SIM |
TERMINAL RESPONSE: SET UP CALL 1.5.1 |
[Permanent Problem – Interaction with Call Control by SIM] |
|
11 |
ME SS |
The ME does not set up the call |
Expected Sequence 1.5 B (CALL CONTROL BY SIM , set up call attempt resulting from a set up call proactive command, not allowed)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
SIM ME |
PROACTIVE COMMAND: SET UP CALL 1.5.1 PENDING |
[This test applies to MEs asking for user confirmation after sending the ENVELOPE CALL CONTROL command] |
|
2 |
MESIM |
FETCH |
|
|
3 |
SIM ME |
PROACTIVE COMMAND: SET UP CALL 1.5.1 |
[Set up call to "+012340123456" |
|
4 |
ME SIM |
ENVELOPE CALL CONTROL 1.5.1A or ENVELOPE CALL CONTROL 1.5.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
5 |
SIM ME |
9F 02 |
|
|
6 |
ME SIM |
GET RESPONSE |
|
|
7 |
SIM ME |
CALL CONTROL RESULT 1.5.1 |
[Call control result: "Not Allowed"] [No user confirmation phase because Call Control has disallowed the request] |
|
8 |
ME SIM |
TERMINAL RESPONSE: SET UP CALL 1.5.1 |
[Permanent Problem – Interaction with Call Control by SIM] |
|
9 |
ME SS |
The ME does not set up the call |
PROACTIVE COMMAND: SET UP CALL 1.5.1
Logically:
Command details
Command number: 1
Command type: SET UP CALL
Command qualifier: Only if not currently busy on another call
Device identities
Source device: SIM
Destination device: Network
Alpha identifier: "+012340123456"
Address
TON: International
NPI: "ISDN / telephone numbering plan"
Dialling number string "012340123456"
Coding:
|
BER-TLV: |
D0 |
21 |
81 |
03 |
01 |
10 |
00 |
82 |
02 |
81 |
83 |
|
05 |
0D |
2B |
30 |
31 |
32 |
33 |
34 |
30 |
31 |
32 |
|
|
33 |
34 |
35 |
36 |
86 |
07 |
91 |
10 |
32 |
04 |
21 |
|
|
43 |
65 |
ENVELOPE CALL CONTROL 1.5.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "012340123456"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
02 |
02 |
82 |
81 |
06 |
07 |
91 |
10 |
32 |
|
04 |
21 |
43 |
65 |
Note 2 |
Note 3 |
13 |
07 |
00 |
F1 |
10 |
|
|
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 1.5.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "012340123456"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
02 |
02 |
82 |
81 |
06 |
07 |
91 |
10 |
32 |
|
04 |
21 |
43 |
65 |
Note 2 |
Note 3 |
13 |
07 |
00 |
11 |
10 |
|
|
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ’16’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets
CALL CONTROL RESULT 1.5.1
Logically:
Call control result: ’01’ = not Allowed
Coding:
|
BER-TLV: |
01 |
00 |
TERMINAL RESPONSE: SET UP CALL 1.5.1
Logically:
Command details
Command number: 1
Command type: SET UP CALL
Command qualifier: Only if not currently busy on another call
Device identities
Source device: ME
Destination device: SIM
Result
General Result: Interaction with call control by SIM or MO short message control by SIM, permanent problem
Additional information: Action not allowed
Coding:
|
BER-TLV: |
81 |
03 |
01 |
10 |
00 |
82 |
02 |
82 |
81 |
83 |
02 |
39 |
|
01 |
Expected Sequence 1.6 (CALL CONTROL BY SIM , set up call attempt by user, allowed with modifications)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
Set up a call to "+01234567890123456789" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 1.6.1 A or ENVELOPE CALL CONTROL 1.6.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 08 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 1.6.1 |
[Call control result: "Allowed with modifications", ] |
|
6 |
ME SS |
The ME sets up the call to "+010203" |
ENVELOPE CALL CONTROL 1.6.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "01234567890123456789"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
0B |
91 |
10 |
32 |
54 |
|
76 |
98 |
10 |
32 |
54 |
76 |
98 |
Note 2 |
Note 3 |
13 |
07 |
00 |
|
|
F1 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 1.6.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "01234567890123456789"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
0B |
91 |
10 |
32 |
54 |
|
76 |
98 |
10 |
32 |
54 |
76 |
98 |
Note 2 |
Note 3 |
13 |
07 |
00 |
|
|
11 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ‘1A’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
CALL CONTROL RESULT 1.6.1
Logically:
Call control result: ’02’ = Allowed with modifications
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "010203"
Coding:
|
BER-TLV: |
02 |
06 |
86 |
04 |
91 |
10 |
20 |
30 |
Expected Sequence 1.7A (CALL CONTROL BY SIM, set up call attempt resulting from a set up call proactive command, allowed with modifications)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
SIM ME |
PROACTIVE COMMAND: SET UP CALL 1.7.1 PENDING |
[This test applies to MEs asking for user confirmation before sending the ENVELOPE CALL CONTROL command] |
|
2 |
MESIM |
FETCH |
|
|
3 |
SIM ME |
PROACTIVE COMMAND: SET UP CALL 1.7.1 |
[Set up call to "+012340123456"] |
|
4 |
ME → USER |
ME displays "+012340123456" during user confirmation phase. |
|
|
5 |
USER → ME |
The user confirms the call set up |
[user confirmation] |
|
6 |
ME SIM |
ENVELOPE CALL CONTROL 1.7.1A or ENVELOPE CALL CONTROL 1.7.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
7 |
SIM ME |
9F 0B |
|
|
8 |
ME SIM |
GET RESPONSE |
|
|
9 |
SIM ME |
CALL CONTROL RESULT 1.7.1 |
[Call control result: "Allowed with modifications"] |
|
10 |
ME SS |
The ME sets up the call to "+011111111111" |
|
|
11 |
ME SIM |
TERMINAL RESPONSE: SET UP CALL 1.7.1 |
[command performed successfully] |
Expected Sequence 1.7 B (CALL CONTROL BY SIM, set up call attempt resulting from a set up call proactive command, allowed with modifications)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
SIM ME |
PROACTIVE COMMAND: SET UP CALL 1.7.1 PENDING |
[This test applies to MEs asking for user confirmation after sending the ENVELOPE CALL CONTROL command] |
|
2 |
MESIM |
FETCH |
|
|
3 |
SIM ME |
PROACTIVE COMMAND: SET UP CALL 1.7.1 |
[Set up call to "+012340123456"] |
|
4 |
ME SIM |
ENVELOPE CALL CONTROL 1.7.1A or ENVELOPE CALL CONTROL 1.7.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
5 |
SIM ME |
9F 0B |
|
|
6 |
ME SIM |
GET RESPONSE |
|
|
7 |
SIM ME |
CALL CONTROL RESULT 1.7.1 |
[Call control result: "Allowed with modifications"] |
|
8 |
ME → USER |
ME displays "+012340123456" during user confirmation phase. |
|
|
9 |
USER → ME |
The user confirms the call set up |
[user confirmation] |
|
10 |
ME SS |
The ME sets up the call to "+011111111111" |
[call is set up to modified address] |
|
11 |
ME SIM |
TERMINAL RESPONSE: SET UP CALL 1.7.1 |
[command performed successfully] |
PROACTIVE COMMAND: SET UP CALL 1.7.1
Logically:
Command details
Command number: 1
Command type: SET UP CALL
Command qualifier: Only if not currently busy on another call
Device identities
Source device: SIM
Destination device: Network
Alpha identifier: “+012340123456"
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "012340123456"
Coding:
|
BER-TLV: |
D0 |
21 |
81 |
03 |
01 |
10 |
00 |
82 |
02 |
81 |
83 |
|
05 |
0D |
2B |
30 |
31 |
32 |
33 |
34 |
30 |
31 |
32 |
|
|
33 |
34 |
35 |
36 |
86 |
07 |
91 |
10 |
32 |
04 |
21 |
|
|
43 |
65 |
ENVELOPE CALL CONTROL 1.7.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "012340123456"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
02 |
02 |
82 |
81 |
06 |
07 |
91 |
10 |
32 |
|
04 |
21 |
43 |
65 |
Note 2 |
Note 3 |
13 |
07 |
00 |
F1 |
10 |
|
|
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 1.7.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "012340123456"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
02 |
02 |
82 |
81 |
06 |
07 |
91 |
10 |
32 |
|
04 |
21 |
43 |
65 |
Note 2 |
Note 3 |
13 |
07 |
00 |
11 |
10 |
|
|
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ’16’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
CALL CONTROL RESULT 1.7.1
Logically:
Call control result: ’02’ = Allowed with modifications
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "011111111111"
Coding:
|
BER-TLV: |
02 |
09 |
86 |
07 |
91 |
10 |
11 |
11 |
11 |
11 |
11 |
TERMINAL RESPONSE: SET UP CALL 1.7.1
Logically:
Command details
Command number: 1
Command type: SET UP CALL
Command qualifier: Only if not currently busy on another call
Device identities
Source device: ME
Destination device: SIM
Result
General Result: Command performed successfully
Coding:
|
BER-TLV: |
81 |
03 |
01 |
10 |
00 |
82 |
02 |
82 |
81 |
83 |
01 |
00 |
Expected Sequence 1.8 (CALL CONTROL BY SIM , set up call attempt by user, allowed with modifications: emergency call)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
Set up a call to "+01234567890123456789" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 1.8.1A or ENVELOPE CALL CONTROL 1.8.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters |
|
3 |
SIM ME |
9F 07 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 1.8.1 |
[Call control result: "Allowed with modifications"] |
|
6 |
ME SS |
The ME sets up an emergency call; |
ENVELOPE CALL CONTROL 1.8.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "01234567890123456789"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
0B |
91 |
10 |
32 |
54 |
|
76 |
98 |
10 |
32 |
54 |
76 |
98 |
Note 2 |
Note 3 |
13 |
07 |
00 |
|
|
F1 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 1.8.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "01234567890123456789"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
0B |
91 |
10 |
32 |
54 |
|
76 |
98 |
10 |
32 |
54 |
76 |
98 |
Note 2 |
Note 3 |
13 |
07 |
00 |
|
|
11 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ‘1A’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
CALL CONTROL RESULT 1.8.1
Logically:
Call control result Allowed, with modification
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Address value "112"
Coding:
|
BER-TLV: |
02 |
05 |
86 |
03 |
81 |
11 |
F2 |
Expected Sequence 1.9 (CALL CONTROL BY SIM , set up call attempt by user, allowed with modifications: number in EFECC)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
Set up a call to "+01234567890123456789" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 1.9.1A or ENVELOPE CALL CONTROL 1.9.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 07 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 1.9.1 |
[Call control result: "Allowed with modifications"] |
|
6 |
ME SS |
The ME sets up call with the dialled digits "1020". The ME does not set up an emergency call, but stes up a normal call |
ENVELOPE CALL CONTROL 1.9.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "01234567890123456789"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
0B |
91 |
10 |
32 |
54 |
|
76 |
98 |
10 |
32 |
54 |
76 |
98 |
Note 2 |
Note 3 |
13 |
07 |
00 |
|
|
F1 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 1.9.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON: International
NPI: "ISDN / telephone numbering plan" or "unknown"
Dialling number string "01234567890123456789"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
0B |
91 |
10 |
32 |
54 |
|
76 |
98 |
10 |
32 |
54 |
76 |
98 |
Note 2 |
Note 3 |
13 |
07 |
00 |
|
|
11 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ‘1A’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
CALL CONTROL RESULT 1.9.1
Logically:
Call control result Allowed, with modification
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Address value "1020"
Coding:
|
BER-TLV: |
02 |
05 |
86 |
03 |
81 |
01 |
02 |
Expected Sequence 1.10 (CALL CONTROL BY SIM , set up call attempt by user to an emergency call)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
Set up a call to "112" |
|
|
2 |
ME SIM |
The ME does not send any ENVELOPE CALL CONTROL |
|
|
3 |
ME SS |
The ME sets up an emergency call |
Expected Sequence 1.11 (CALL CONTROL BY SIM , set up call through call register, the SIM responds with ’90 00′)
Pre-condition: the ME has a mean to register the last dialled number(s), and the ME will store dialled numbers allowed by call control in its register.
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
Set up a call to "+01234567890123456789" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 1.1.1A or ENVELOPE CALL CONTROL 1.1.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
90 00 |
|
|
4 |
ME SS |
The ME sets up the call without modification |
[Set up call to "+01234567890123456789"] |
|
5 |
USER ME |
End Call. |
|
|
6 |
USER ME |
Recall the last dialled number |
|
|
7 |
ME SIM |
ENVELOPE CALL CONTROL 1.1.1A or ENVELOPE CALL CONTROL 1.1.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
8 |
SIM ME |
90 00 |
|
|
9 |
ME SS |
The ME sets up the call without modification |
[Set up call to "+01234567890123456789"] |
|
10 |
USER ME |
End Call. |
Expected Sequence 1.12 (CALL CONTROL BY SIM , set up call through call register, allowed without modification)
Pre-condition: the ME has a mean to register the last dialled number(s), and the ME will store dialled numbers allowed by call control in its register.
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
Set up a call to "+01234567890123456789" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 1.2.1A or ENVELOPE CALL CONTROL 1.2.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 02 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 1.2.1 |
[Call control result: "Allowed, no modification"] |
|
6 |
ME SS |
The ME sets up the call without modification |
[Set up call to "+01234567890123456789"] |
|
7 |
User ME |
End the call then call the last dialled number |
|
|
8 |
ME SIM |
ENVELOPE CALL CONTROL 1.2.1A or ENVELOPE CALL CONTROL 1.2.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
9 |
SIM ME |
9F 02 |
[Call control result: "Allowed, no modification"] |
|
10 |
ME SIM |
GET RESPONSE |
|
|
11 |
SIM ME |
CALL CONTROL RESULT 1.2.1 |
|
|
12 |
ME SS |
The ME sets up the call without modification |
[Set up call to "+01234567890123456789"] |
Expected Sequence 1.13 (CALL CONTROL BY SIM , set up call through call register, not allowed)
Pre-condition: the ME has a mean to register the last dialled number(s), and the ME will store dialled numbers not allowed by call control in its register.
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
Set up a call to "+01234567890123456789" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 1.4.1A or ENVELOPE CALL CONTROL 1.4.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 02 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 1.4.1 |
[Call control result: "not Allowed"] |
|
6 |
ME SS |
The ME does not set up the call |
|
|
7 |
User ME |
The user calls the last dialled number |
|
|
8 |
ME SIM |
ENVELOPE CALL CONTROL 1.4.1A or ENVELOPE CALL CONTROL 1.4.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
9 |
SIM ME |
9F 02 |
|
|
10 |
ME SIM |
GET RESPONSE |
|
|
11 |
SIM ME |
CALL CONTROL RESULT 1.4.1 |
[Call control result: "not Allowed"] |
|
12 |
ME SS |
The ME does not set up the call |
Expected Sequence 1.14 (CALL CONTROL BY SIM , set up call through call register, allowed with modifications)
Pre-condition: the ME has a mean to register the last dialled number(s), and the ME will store dialled numbers allowed with modification by call control in its register.
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
Set up a call to "+01234567890123456789" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 1.6.1A or ENVELOPE CALL CONTROL 1.6.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 08 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 1.6.1 |
[Call control result: "Allowed with modifications"] |
|
6 |
ME SS |
The ME sets up the call to "+010203" |
|
|
7 |
User ME |
End the call and then set up a call to "+01234567890123456789" |
|
|
8 |
ME SIM |
ENVELOPE CALL CONTROL 1.6.1A or ENVELOPE CALL CONTROL 1.6.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
9 |
SIM ME |
9F 08 |
|
|
10 |
ME SIM |
GET RESPONSE |
|
|
11 |
SIM ME |
CALL CONTROL RESULT 1.6.1 |
[Call control result: "Allowed with modifications"] |
|
12 |
ME SS |
The ME sets up the call to "+010203" |
27.22.6.1.5 Test requirement
The ME shall operate in the manner defined in expected sequences 1.1 to 1.14.
27.22.6.2 Procedure for Supplementary (SS) Services
27.22.6.2.1 Definition and applicability
See clause 3.2.2.
27.22.6.2.2 Conformance requirement
The ME shall support the CALL CONTROL facility as defined in the following technical specifications:
– TS 11.14 [15] clause 9.1.2.
27.22.6.2.3 Test purpose
To verify that the ME first pass the supplementary service control string corresponding to the supplementary service operation to the SIM, using the ENVELOPE (CALL CONTROL) command.
To verify that, if the SIM responds with ’90 00′, the ME shall send the supplementary service operation with the information as sent to the SIM.
To verify that, if the SIM responds with ‘9F XX’, the ME shall use the GET RESPONSE command to get the response data. The response data from the SIM shall indicate to the ME whether to send the supplementary service operation as proposed, not send the SS operation, or instead send the SS operation using the data supplied by the SIM.
27.22.6.2.4 Method of tests
27.22.6.2.4.1 Initial conditions
The ME is connected to the SIM Simulator and the System Simulator.
Prior to this test the ME shall have been powered on and performed the PROFILE DOWNLOAD procedure.
The elementary files are coded as SIM Application Toolkit default with the following exception:
The call control service is allocated and activated in the SIM Service Table.
The GSM parameters of the system simulator are:
– Mobile Country Code (MCC) = 001;
– Mobile Network Code (MNC) = 01 ;
– Location Area Code (LAC) = 0001;
– Cell Identity value = 0001.
The PCS 1900 parameters of the system simulator are:
– Mobile Country Code (MCC) = 001;
– Mobile Network Code (MNC) = 011;
– Location Area Code (LAC) = 0001;
– Cell Identity value = 0001.
27.22.6.2.4.2 Procedure
Expected Sequence 2.1 (CALL CONTROL BY SIM , send SS, the SIM responds with ’90 00′)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
The user selects the facility of the ME which requires an unconditional call forward supplementary service operation to be sent to the network (System Simulator). |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 2.1.1A or ENVELOPE CALL CONTROL 2.1.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
90 00 |
|
|
4 |
ME SS |
REGISTER 2.1A |
[The ME sends the supplementary service operation with the information as sent to the SIM] |
|
5 |
SS ME |
RELEASE COMPLETE (SS RETURN RESULT) 2.1 |
ENVELOPE CALL CONTROL 2.1.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
SS String
TON/NPI: "FF"
Dialling number string "*21**10#"
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Coding:
|
BER-TLV: |
D4 |
14 |
82 |
02 |
82 |
81 |
89 |
05 |
FF |
2A |
A1 |
1A |
|
B0 |
13 |
07 |
00 |
F1 |
10 |
00 |
01 |
00 |
01 |
ENVELOPE CALL CONTROL 2.1.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
SS String
TON/NPI: "FF"
Dialling number string "*21**10#"
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Coding:
|
BER-TLV: |
D4 |
14 |
82 |
02 |
82 |
81 |
89 |
05 |
FF |
2A |
A1 |
1A |
|
B0 |
13 |
07 |
00 |
11 |
10 |
00 |
01 |
00 |
01 |
REGISTER 2.1A
Logically (only SS argument):
ACTIVATE SS ARGUMENT
SS-Code:
– Call Forwarding Unconditional
TeleserviceCode
– All Tele Services
Coding:
|
Coding |
30 |
06 |
04 |
01 |
21 |
83 |
01 |
00 |
REGISTER 2.1B
Logically (only SS argument):
ACTIVATE SS ARGUMENT
SS-Code:
– Call Forwarding Unconditional
TeleserviceCode
– All Tele Services
– longFTN Supported
Coding:
|
Coding |
30 |
08 |
04 |
01 |
21 |
83 |
01 |
00 |
84 |
00 |
RELEASE COMPLETE (SS RETURN RESULT) 2.1
Logically (only from operation code):
ACTIVATE SS RETURN RESULT
ForwardingInfo
SS-Code
– Call Forwarding Unconditional
ForwardFeatureList
ForwardingFeature
TeleserviceCode
– All Tele Services
SS-Status
– state ind.: operative
– provision ind.: provisioned
– registration ind.: registered
– activation ind.: active
Coding:
|
Coding |
0C |
A0 |
0D |
04 |
01 |
21 |
30 |
08 |
30 |
06 |
83 |
01 |
|
00 |
84 |
01 |
07 |
Expected Sequence 2.2 (CALL CONTROL BY SIM , send SS, allowed without modifications)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
The user selects the facility of the ME which requires an unconditional call forward supplementary service operation to be sent to the network (System Simulator). |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 2.2.1A or ENVELOPE CALL CONTROL 2.2.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 02 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 2.2.1 |
[Call control result: "Allowed without modifications"] |
|
6 |
ME SS |
REGISTER 2.1A |
The ME sends the supplementary service operation with the information as sent to the SIM |
|
7 |
SS ME |
RELEASE COMPLETE (SS RETURN RESULT) 2.1 |
ENVELOPE CALL CONTROL 2.2.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
SS String
TON/NPI: "FF"
Dialling number string "*21**10#"
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Coding:
|
BER-TLV: |
D4 |
14 |
82 |
02 |
82 |
81 |
89 |
05 |
FF |
2A |
A1 |
1A |
|
B0 |
13 |
07 |
00 |
F1 |
10 |
00 |
01 |
00 |
01 |
ENVELOPE CALL CONTROL 2.2.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
SS String
TON/NPI: "FF"
Dialling number string "*21**10#"
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Coding:
|
BER-TLV: |
D4 |
14 |
82 |
02 |
82 |
81 |
89 |
05 |
FF |
2A |
A1 |
1A |
|
B0 |
13 |
07 |
00 |
11 |
10 |
00 |
01 |
00 |
01 |
CALL CONTROL RESULT 2.2.1
Logically:
Call control result Allowed, no modifications
Coding:
|
BER-TLV: |
00 |
00 |
Expected Sequence 2.3 (CALL CONTROL BY SIM , send SS, not allowed)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
The user selects the facility of the ME which requires an unconditional call forward supplementary service operation to be sent to the network (System Simulator). |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 2.3.1A or ENVELOPE CALL CONTROL 2.3.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 02 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 2.3.1 |
[Call control result: "Not Allowed"] |
|
6 |
ME SS |
The ME does not send the supplementary service operation |
ENVELOPE CALL CONTROL 2.3.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
SS String
TON/NPI: "FF"
Dialling number string "*21#"
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Coding:
|
BER-TLV: |
D4 |
12 |
82 |
02 |
82 |
81 |
89 |
03 |
FF |
2A |
B1 |
13 |
|
07 |
00 |
F1 |
10 |
00 |
01 |
00 |
01 |
ENVELOPE CALL CONTROL 2.3.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
SS String
TON/NPI: "FF"
Dialling number string "*21#"
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Coding:
|
BER-TLV: |
D4 |
12 |
82 |
02 |
82 |
81 |
89 |
03 |
FF |
2A |
B1 |
13 |
|
07 |
00 |
11 |
10 |
00 |
01 |
00 |
01 |
CALL CONTROL RESULT 2.3.1
Logically:
Call control result Not Allowed
Coding:
|
BER-TLV: |
01 |
00 |
Expected Sequence 2.4 (CALL CONTROL BY SIM , send SS, allowed with modifications)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
The user selects the facility of the ME which requires an unconditional call forward supplementary service operation to be sent to the network (System Simulator). |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 2.4.1A or ENVELOPE CALL CONTROL 2.4.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 07 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 2.4.1 |
[Call control result: "Allowed with modifications"] |
|
6 |
ME SS |
REGISTER 2.4A |
[The ME sends the supplementary service operation with the information as sent by the SIM] |
|
7 |
SS ME |
RELEASE COMPLETE (SS RETURN RESULT) 2.4 |
ENVELOPE CALL CONTROL 2.4.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
SS String
TON/NPI: "FF"
Dialling number string "*21#"
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Coding:
|
BER-TLV: |
D4 |
12 |
82 |
02 |
82 |
81 |
89 |
03 |
FF |
2A |
B1 |
13 |
|
07 |
00 |
F1 |
10 |
00 |
01 |
00 |
01 |
ENVELOPE CALL CONTROL 2.4.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
SS String
TON/NPI: "FF"
Dialling number string "*21#"
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Coding:
|
BER-TLV: |
D4 |
12 |
82 |
02 |
82 |
81 |
89 |
03 |
FF |
2A |
B1 |
13 |
|
07 |
00 |
11 |
10 |
00 |
01 |
00 |
01 |
CALL CONTROL RESULT 2.4.1
Logically:
Call control result Allowed, with modifications
SS String
TON/NPI "FF"
SS String "*#21#"
Coding:
|
Coding |
02 |
06 |
89 |
04 |
FF |
BA |
12 |
FB |
REGISTER 2.4A
Logically (only SS argument):
INTERROGATE SS ARGUMENT
SS-Code
– Call Forwarding Unconditional
Coding:
|
Coding |
30 |
03 |
04 |
01 |
21 |
REGISTER 2.4B
Logically (only SS argument):
INTERROGATE SS ARGUMENT
SS-Code
– Call Forwarding Unconditional
– longFTN Supported
Coding:
|
Coding |
30 |
05 |
04 |
01 |
21 |
84 |
00 |
RELEASE COMPLETE (SS RETURN RESULT) 2.4
Logically (only from operation code):
INTERROGATE SS RESULT
Call Forwarding Unconditional
SS-Status
– state ind.: operative
– provision ind.: provisioned
– registration ind.: registered
– activation ind.: not active
Coding:
|
Coding |
80 |
01 |
06 |
27.22.6.2.5 Test requirement
The ME shall operate in the manner defined in expected sequences 2.1 to 2.4.
27.22.6.3 Interaction with Fixed Dialling Number (FDN)
27.22.6.3.1 Definition and applicability
See clause 3.2.2.
27.22.6.3.2 Conformance requirement
The ME shall support the CALL CONTROL facility as defined in:
– TS 11.14 [15] clause 9.1.4.
27.22.6.3.3 Test purpose
To verify that the ME checks that the number entered through the MMI is on the FDN list.
To verify that, if the MMI input does not pass the FDN check, the call shall not be set up.
To verify that, if the MMI input does pass the FDN check, the ME shall pass the dialled digits and other parameters to the SIM, using the ENVELOPE (CALL CONTROL) command.
To verify that, if the SIM responds with "allowed, no modification", the ME shall set up the call as proposed.
To verify that, if the SIM responds with "not allowed", the ME shall not set up the call.
To verify that, if the SIM responds with "allowed with modifications", the ME shall set up the call in accordance with the response from the SIM. If the modifications involve changing the dialled digits, the ME shall not re-check this modified number against the FDN list.
27.22.6.3.4 Method of tests
27.22.6.3.4.1 Initial conditions
The ME is connected to the SIM Simulator and the System Simulator.
Prior to this test the ME shall have been powered on and performed the PROFILE DOWNLOAD procedure.
The elementary files are coded as SIM Application Toolkit default with the following exceptions:
The call control service is allocated and activated in the SIM Service Table.
Fixed Dialling Number service is enabled.
The GSM parameters of the system simulator are:
- Mobile Country Code (MCC) = 001;
- Mobile Network Code (MNC) = 01 ;
- Location Area Code (LAC) = 0001;
- Cell Identity value = 0001.
The PCS 1900 parameters of the system simulator are:
– Mobile Country Code (MCC) = 001;
– Mobile Network Code (MNC) = 011;
– Location Area Code (LAC) = 0001;
– Cell Identity value = 0001.
27.22.6.3.4.2 Procedure
Expected Sequence 3.1 (CALL CONTROL BY SIM , set up a call not in EFFDN)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
The user sets up a call to "4321" |
|
|
2 |
ME SIM |
The ME does not send the ENVELOPE (CALL CONTROL) command to the SIM. |
|
|
3 |
ME SS |
The ME does not set up the call. |
Expected Sequence 3.2 (CALL CONTROL BY SIM , set up a call in EFFDN , the SIM responds with ’90 00′)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
The user sets up a call to "123" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 3.2.1A or ENVELOPE CALL CONTROL 3.2.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
90 00 |
|
|
4 |
ME SS |
The ME sets up the call without modification |
[Set up call to "123"] |
ENVELOPE CALL CONTROL 3.2.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "123"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
21 |
F3 |
Note 2 |
|
Note 3 |
13 |
07 |
00 |
F1 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 3.2.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "123"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
21 |
F3 |
Note 2 |
|
Note 3 |
13 |
07 |
00 |
11 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ’12’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
Expected Sequence 3.3 (CALL CONTROL BY SIM , set up a call in EFFDN, Allowed without modifications)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
The user sets up a call to "9876" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 3.3.1A or ENVELOPE CALL CONTROL 3.3.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 02 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 3.3.1 |
[Call control result: "Allowed without modifications"] |
|
6 |
ME SS |
The ME sets up the call without modification |
[Set up call to "9876"] |
ENVELOPE CALL CONTROL 3.3.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "9876"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
89 |
67 |
Note 2 |
|
Note 3 |
13 |
07 |
00 |
F1 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 3.3.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "9876"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
89 |
67 |
Note 2 |
|
Note 3 |
13 |
07 |
00 |
11 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ’12’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets
CALL CONTROL RESULT 3.3.1
Logically:
Call control result Allowed, no modifications
Coding:
|
BER-TLV: |
00 |
00 |
Expected Sequence 3.4 (CALL CONTROL BY SIM , set up a call in EFFDN , Not Allowed)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
The user sets up a call to "9876" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 3.4.1A or ENVELOPE CALL CONTROL 3.4.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 02 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 3.4.1 |
[Call control result: "Not Allowed"] |
|
6 |
ME SS |
The ME does not set up the call |
ENVELOPE CALL CONTROL 3.4.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "9876"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
89 |
67 |
Note 2 |
|
Note 3 |
13 |
07 |
00 |
F1 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 3.4.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "9876"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
89 |
67 |
Note 2 |
|
Note 3 |
13 |
07 |
00 |
11 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ’12’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
CALL CONTROL RESULT 3.4.1
Logically:
Call control result Not Allowed
Coding:
|
BER-TLV: |
01 |
00 |
Expected Sequence 3.5 (CALL CONTROL BY SIM , set up a call in EFFDN , Allowed with modifications)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
The user sets up a call to "9876" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 3.5.1A or ENVELOPE CALL CONTROL 3.5.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 07 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 3.5.1 |
[Call control result: "Allowed with modifications"] |
|
6 |
ME SS |
The ME sets up the call with data sent by the SIM |
[Set up call to "3333"] |
ENVELOPE CALL CONTROL 3.5.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "9876"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
89 |
67 |
Note 2 |
|
Note3 |
13 |
07 |
00 |
F1 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 3.5.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "9876"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
89 |
67 |
Note 2 |
|
Note3 |
13 |
07 |
00 |
11 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ’12’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
CALL CONTROL RESULT 3.5.1
Logically:
Call control result Allowed with modifications
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Address value "3333"
Coding:
|
BER-TLV: |
02 |
05 |
86 |
03 |
81 |
33 |
33 |
27.22.6.3.5 Test requirement
The ME shall operate in the manner defined in expected sequences 3.1 to 3.5.
27.22.6.4 Support of Barred Dialling Number (BDN) service
27.22.6.4.1 Definition and applicability
See clause 3.2.2.
27.22.6.4.2 Conformance requirement
The ME shall support the CALL CONTROL facility as defined in:
– TS 11.14 [15] clause 9.1.5.
27.22.6.4.3 Test purpose
To verify that, if Barred Dialling Number service is enabled, the ME checks the number entered through the MMI against EFBDN.
To verify that, if the SIM responds with "not allowed", the ME does not set up the call.
To verify that, if the SIM responds with "allowed, no modification", the ME shall set up the call (or the supplementary service operation) as proposed.
To verify that, if the SIM responds with "allowed with modifications", the ME sets up the call in accordance with the response from the SIM. If the modifications involve changing the dialled number the ME does not re-check this modified number against the FDN list when FDN is enabled.
27.22.6.4.4 Method of tests
27.22.6.4.4.1 Initial conditions
The ME is connected to the SIM Simulator and the Systems Simulator.
Prior to this test the ME shall have been powered on and performed the PROFILE DOWNLOAD procedure.
The elementary files are coded as SIM Application Toolkit default with the following exceptions:
The call control service is allocated and activated in the SIM Service Table.
Barred Dialling Number service is enabled.
Prior to the execution of expected sequence 4.4 the FDN service shall be enabled.
The GSM parameters of the system simulator are:
- Mobile Country Code (MCC) = 001;
- Mobile Network Code (MNC) = 01 ;
- Location Area Code (LAC) = 0001;
- Cell Identity value = 0001.
The PCS 1900 parameters of the system simulator are:
– Mobile Country Code (MCC) = 001;
– Mobile Network Code (MNC) = 011;
– Location Area Code (LAC) = 0001;
– Cell Identity value = 0001.
27.22.6.4.4.2 Procedure
Expected Sequence 4.1 (CALL CONTROL BY SIM , set up a call in EFBDN)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
The user sets up a call to "321" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 4.1.1A or ENVELOPE CALL CONTROL 4.1.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 02 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 4.1.1 |
[Call control result: "Not Allowed"] |
|
6 |
ME SS |
The ME does not set up the call |
ENVELOPE CALL CONTROL 4.1.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "321"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
23 |
F1 |
Note 2 |
|
Note 3 |
13 |
07 |
00 |
F1 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 4.1.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "321"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
23 |
F1 |
Note 2 |
|
Note 3 |
13 |
07 |
00 |
11 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ’12’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
CALL CONTROL RESULT 4.1.1
Logically:
Call control result Not Allowed
Coding:
|
BER-TLV: |
01 |
00 |
Expected Sequence 4.2 (CALL CONTROL BY SIM , set up a call not in EFBDN , Allowed without modifications)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
The user sets up a call to "1234" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 4.2.1A or ENVELOPE CALL CONTROL 4.2.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 02 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 4.2.1 |
[Call control result: "Allowed without modifications"] |
|
6 |
ME SS |
The ME sets up the call without modification |
[Set up call to "1234"] |
ENVELOPE CALL CONTROL 4.2.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "1234"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
21 |
43 |
Note 2 |
|
Note 3 |
13 |
07 |
00 |
F1 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 4.2.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "1234"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
21 |
43 |
Note 2 |
|
Note 3 |
13 |
07 |
00 |
11 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ’12’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
CALL CONTROL RESULT 4.2.1
Logically:
Call control result Allowed, no modifications
Coding:
|
BER-TLV: |
00 |
00 |
Expected Sequence 4.3 (CALL CONTROL BY SIM , set up a call not in EFBDN , Allowed with modifications)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
The user sets up a call to "1111" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 4.3.1A or ENVELOPE CALL CONTROL 4.3.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 07 |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 4.3.1 |
[Call control result: "Allowed with modifications"] |
|
6 |
ME SS |
The ME sets up the call with data sent by the SIM |
[Set up call to "2222"] |
ENVELOPE CALL CONTROL 4.3.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "1111"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
11 |
11 |
Note 2 |
|
Note 3 |
13 |
07 |
00 |
F1 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 4.3.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "1111"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
11 |
11 |
Note 2 |
|
Note 3 |
13 |
07 |
00 |
11 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ’12’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
CALL CONTROL RESULT 4.3.1
Logically:
Call control result Allowed with modifications
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Address value "2222"
Coding:
|
BER-TLV: |
02 |
05 |
86 |
03 |
81 |
22 |
22 |
Expected Sequence 4.4 (CALL CONTROL BY SIM , FDN and BDN enabled, set up a call in EFFDN, Allowed with modifications)
|
Step |
Direction |
Message / Action |
Comments |
|
1 |
User ME |
The user sets up a call to "123" |
|
|
2 |
ME SIM |
ENVELOPE CALL CONTROL 4.4.1A Or ENVELOPE CALL CONTROL 4.4.1B |
[Option A shall apply for GSM parameters] [Option B shall apply for PCS1900 parameters] |
|
3 |
SIM ME |
9F 0A |
|
|
4 |
ME SIM |
GET RESPONSE |
|
|
5 |
SIM ME |
CALL CONTROL RESULT 4.4.1 |
[Call control result: "Allowed with modifications"] |
|
6 |
ME SS |
The ME sets up the call with data sent by the SIM |
[Set up call to "987654321"the ME does not re-check this modified number against the FDN list] |
ENVELOPE CALL CONTROL 4.4.1A
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "123"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (00F110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
21 |
F3 |
Note 2 |
|
Note 3 |
13 |
07 |
00 |
F1 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
ENVELOPE CALL CONTROL 4.4.1B
Logically:
Device identities
Source device: ME
Destination device: SIM
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Dialling number string "123"
Capability configuration parameters 1
This parameter is optional. If present, the contents shall not be checked.
Subaddress
This parameter is optional. If present, the contents shall not be checked.
Location Information
MCC & MNC the mobile country and network code (001110)
LAC the location Area Code (0001)
Cell ID Cell Identity Value (0001)
Capability configuration parameters 2
This parameter is optional. If present, the contents shall not be checked.
Coding:
|
BER-TLV: |
D4 |
Note 1 |
82 |
02 |
82 |
81 |
86 |
03 |
81 |
21 |
F3 |
Note 2 |
|
Note 3 |
13 |
07 |
00 |
11 |
10 |
00 |
01 |
00 |
01 |
Note 4 |
Note 1: Length of BER-TLV is ’12’ plus the actual length of all the present optional SIMPLE-TLV data objects.
Note 2: Capability configuration parameters 1 may be present at this place. If present, it may take up several octets.
Note 3: Subaddress may be present at this place. If present, it may take up several octets.
Note 4: Capability configuration parameters 2 may be present at this place. If present, it may take up several octets.
CALL CONTROL RESULT 4.4.1
Logically:
Call control result Allowed with modifications
Address
TON Unknown
NPI "ISDN / telephone numbering plan"
Address value "987654321"
Coding:
|
BER-TLV: |
02 |
08 |
86 |
06 |
81 |
89 |
67 |
45 |
23 |
F1 |
27.22.6.4.5 Test requirement
The ME shall operate in the manner defined in expected sequences 4.1 to 4.4.