P.2 Other receiver characteristics
3GPP45.005GSM/EDGE Radio transmission and receptionTS
P.2.1 Blocking characteristics
a) Wanted signal GMSK, and wanted signal 8-PSK modulated
b) Static propagation conditions
c) Reference receiver performance for the following channels:
– GMSK modulated speech channels according to requirements in table 1: TCH/FS,
– If supported, 8-PSK modulated circuit-switched data channels according to table 1d:
E-TCH/F (T) for highest supported coding scheme
– If supported, 8-PSK modulated packet-switched channels (EGPRS) according to table 1b:
lowest supported coding scheme (MCS) using BTTI and no PAN
For the Additional Narrowband blocking minimum requirement for GSM/EDGE, the following also applies:
d) Narrow band blocking for interferer at frequency offsets ≥600 kHz to the end of the relevant receive band
(apply only for Additional Narrowband blocking minimum requirements for GSM/EDGE)
e) Blocking characteristics shall be fulfilled according to the criteria, definitions and requirements in subclause 5.1 for the channels and conditions above
P.2.2 Intermodulation characteristics
a) Static propagation conditions
b) Reference receiver performance for the following channels:
– GMSK modulated speech channels according to requirements in table 1: TCH/FS ,
– If supported, 8-PSK modulated circuit-switched data channels according to table 1d:
E-TCH/F (T) for highest supported coding scheme
– If supported, 8-PSK modulated packet-switched channels (EGPRS) according to table 1b:
lowest supported coding scheme (MCS) using BTTI and no PAN
For the Additional narrowband intermodulation minimum requirement for GSM/EDGE, the following also applies:
c) Intermodulation characteristics shall be fulfilled according to the criteria, definitions and requirements in subclause 5.2 for the channels and conditions above
P.2.3 AM suppression
AM suppresssion characteristics shall be fulfilled according to the criteria, definitions and requirements in subclause 5.3 for the following channels and conditions :
a) Static propagation conditions
b) Reference receiver performance for the following channels:
– GMSK modulated speech channels according to requirements in table 1: TCH/FS ,
– If supported, 8-PSK modulated circuit-switched data channels according to table 1d:
E-TCH/F (T) for highest supported coding scheme
– If supported, 8-PSK modulated packet-switched channels (EGPRS) according to table 1b:
lowest supported coding scheme (MCS) using BTTI and no PAN
Annex Q (normative):
Reference Test Scenarios for Voice services over Adaptive Multi-user channels on One Slot (VAMOS)