9.1.39 System information type 5ter
3GPP44.018GSM/EDGE Radio Resource Control (RRC) protocolMobile radio interface Layer 3 specificationRelease 17TS
This message is sent optionally on the SACCH by the network to mobile stations within the cell giving information on the extension of the BCCH allocation in the neighbour cells. See table 9.1.39.1.
A mobile station that supports either:
– only the primary GSM band P-GSM 900 (cf. 3GPP TS 45.005); or
– only the DCS 1800 band (cf. 3GPP TS 45.005);
– may ignore this message, see sub-clause 3.2.2.1.
When received (and not ignored) this information must be used as part of the list of neighbouring cells to be reported on. Any change in the neighbour cell description must overwrite this part of any old data held by the mobile station. The mobile station shall, with the exception stated above, analyse all correctly received system information type 5ter messages. This message has a L2 Pseudo Length of 18.
Message type: SYSTEM INFORMATION TYPE 5ter
Significance: dual
Direction: network to mobile station
Table 9.1.39.1: SYSTEM INFORMATION TYPE 5ter message content
|
IEI |
Information element |
Type / Reference |
Presence |
Format |
length |
|
L2 pseudo length |
L2 pseudo length |
M |
V |
1 |
|
|
RR management Protocol Discriminator |
Protocol Discriminator |
M |
V |
1/2 |
|
|
Skip Indicator |
Skip Indicator |
M |
V |
1/2 |
|
|
System Information Type 5ter Message Type |
Message Type |
M |
V |
1 |
|
|
Extended BCCH Frequency List |
Neighbour Cell Description 2 |
M |
V |
16 |