PLMN Identity

M

9.2.2.4

CHOICE gNB ID

M

>gNB ID

>>gNB ID

M

BIT STRING (SIZE(22..32))

Equal to the leftmost bits of the NR Cell Identity IE contained in the NR CGI IE of each cell served by the gNB.

PLMN Identity

M

9.2.2.4

CHOICE ng-eNB ID

M

>Macro ng-eNB ID

>>Macro ng-eNB ID

M

BIT STRING (SIZE(20))

Equal to the 20 leftmost bits of the E-UTRA Cell Identity IE contained in the E-UTRA CGI IE of each cell served by the ng-eNB.

>Short Macro ng-eNB ID

>>Short Macro ng-eNB ID

M

BIT STRING (SIZE(18))

Equal to the 18 leftmost bits of the E-UTRA Cell Identity IE contained in the E-UTRA CGI IE of each cell served by the ng-eNB.

>Long Macro ng-eNB ID

>>Long Macro ng-eNB ID

M

BIT STRING (SIZE(21))

Equal to the 21 leftmost bits of the E-UTRA Cell Identity IE contained in the E-UTRA CGI IE of each cell served by the ng-eNB.

CHOICE NG-RAN node

M

>gNB

>>Global gNB ID

M

9.2.2.1

>ng-eNB

>>Global ng-eNB ID

M

9.2.2.2

PLMN Identity

M

OCTET STRING (SIZE(3))

Digits 0 to 9 encoded 0000 to 1001, 1111 used as filler digit.

Two digits per octet:

– bits 4 to 1 of octet n encoding digit 2n-1

– bits 8 to 5 of octet n encoding digit 2n

PLMN Identity consists of 3 digits from MCC followed by either:
– a filler digit plus 2 digits from MNC (in case of 2 digit MNC) or
– 3 digits from MNC (in case of 3 digit MNC).

TAC

M

OCTET STRING (SIZE (3))

RANAC

M

INTEGER (0..255)

PLMN Identity

M

9.2.2.4

NR Cell Identity

M

BIT STRING (SIZE(36))

The leftmost bits of the NR Cell Identity IE correspond to the gNB ID (defined in subclause 9.2.2.1).

PLMN Identity

M

9.2.2.4

E-UTRA Cell Identity

M

BIT STRING (SIZE(28))

The leftmost bits of the E-UTRA Cell Identity IE correspond to the ng-eNB ID (defined in subclause 9.2.2.2).

CHOICE Cell Identifier

M

>NR

>>NR Cell Identity

M

BIT STRING (SIZE(36))

The leftmost bits of the NR Cell Identity IE correspond to the gNB ID (defined in subclause 9.2.2.1).

>E-UTRA

>>E-UTRA Cell Identity

M

BIT STRING (SIZE(28))

The leftmost bits of the E-UTRA Cell Identity IE correspond to the ng-eNB ID (defined in subclause 9.2.2.8).

CHOICE RAT

M

>nr

>>NR PCI

M

INTEGER (0..1007, …)

NR Physical Cell ID

>e-utra

>>E-UTRA PCI

M

INTEGER (0..503, …)

E-UTRA Physical Cell ID

NR-PCI

M

INTEGER (0..1007, …)

NR Physical Cell ID

–

NR CGI

M

9.2.2.7

–

TAC

M

9.2.2.5

Tracking Area Code

–

RANAC

O

RAN Area Code

9.2.2.6

–

Broadcast PLMNs

1..<maxnoofBPLMNs>

Broadcast PLMNs in SIB1 associated to the NR Cell Identity in the NR CGI IE.

–

>PLMN Identity

M

9.2.2.4

–

CHOICE NR-Mode-Info

M

–

>FDD

>>FDD Info

1

–

>>>UL NR Frequency Info

M

NR Frequency Info

9.2.2.19

This IE is ignored for NR operating bands for which uplink range of N_REF is not defined in section 5.4.2.3 of TS 38.104 [24].

–

>>>DL NR Frequency Info

M

NR Frequency Info

9.2.2.19

–

>>>UL Transmission Bandwidth

M

NR Transmission Bandwidth

9.2.2.20

This IE is ignored for NR operating bands for which uplink range of N_REF is not defined in section 5.4.2.3 of TS 38.104 [24].

–

>>>DL Transmission Bandwidth

M

NR Transmission Bandwidth

9.2.2.20

–

>>>UL Carrier List

O

NR Carrier List

9.2.2.63

If included, the UL Transmission Bandwidth IE shall be ignored.

YES

ignore

>>>DL Carrier List

O

NR Carrier List

9.2.2.63

If included, the DL Transmission Bandwidth IE shall be ignored.

YES

ignore

>>>gNB-DU Cell Resource Configuration-FDD-UL

O

gNB-DU Cell Resource Configuration

9.2.2.95

Contains FDD UL resource configuration of gNB-DU’s cell. Only applicable if the gNB-DU is an IAB-DU or an IAB-donor-DU.

YES

ignore

>>>gNB-DU Cell Resource Configuration-FDD-DL

O

gNB-DU Cell Resource Configuration

9.2.2.95

Contains FDD UL resource configuration of gNB-DU’s cell. Only applicable if the gNB-DU is an IAB-DU or an IAB-donor-DU.

YES

ignore

>TDD

>>TDD Info

1

–

>>>Frequency Info

M

NR Frequency Info

9.2.2.19

–

>>>Transmission Bandwidth

M

NR Transmission Bandwidth

9.2.2.20

–

>>>Intended TDD DL-UL Configuration NR

O

9.2.2.40

YES

ignore

>>>TDD UL-DL Configuration Common NR

O

OCTET STRING

The tdd-UL-DL-ConfigurationCommon as defined in TS 38.331 [10]

YES

ignore

>>>Carrier List

O

NR Carrier List

9.2.2.63

If included, the Transmission Bandwidth IE shall be ignored.

YES

ignore

>>>gNB-DU Cell Resource Configuration-TDD

O

gNB-DU Cell Resource Configuration

9.2.2.95

Contains FDD UL resource configuration of gNB-DU’s cell. Only applicable if the gNB-DU is an IAB-DU or an IAB-donor-DU.

YES

ignore

Measurement Timing Configuration

M

OCTET STRING

Contains the MeasurementTimingConfiguration inter-node message for the served cell, as defined in TS 38.331 [10].

–

Connectivity Support

M

9.2.2.28

–

Broadcast PLMN Identity Info List NR

0..<maxnoofBPLMNs>

This IE corresponds to the PLMN-IdentityInfoList IE and the NPN-IdentityInfoList IE (if available) in SIB1 as specified in TS 38.331 [10]. All PLMN Identities and associated information contained in the PLMN-IdentityInfoList IE and NPN identities and associated information contained in the NPN-IdentityInfoList IE (if available) are included and provided in the same order as broadcast in SIB1.

NOTE: In case of NPN-only cell, the PLMN Identities and associated information contained in the PLMN-IdentityInfoList IE are not included.

YES

ignore

>Broadcast PLMNs

1..<maxnoofBPLMNs>

Broadcast PLMNs in SIB1 associated to the NR Cell Identity IE.

–

>>PLMN Identity

M

9.2.2.4

–

>TAC

M

9.2.2.5

–

>NR Cell Identity

M

BIT STRING (SIZE(36))

–

>RANAC

O

RAN Area Code

9.2.2.6

–

>Configured TAC Indication

O

9.2.2.39a

NOTE: This IE is associated with the TAC in the Broadcast PLMN Identity Info List NR IE

YES

ignore

>NPN Broadcast Information

O

9.2.2.71

If this IE is included the content of the Broadcast PLMNs IE in the Broadcast PLMN Identity Info List NR IE is ignored.

YES

reject

Configured TAC Indication

O

9.2.2.39a

NOTE: This IE is associated with the TAC on top-level of the Served Cell Information NR IE

YES

ignore

NPN Broadcast Information

O

9.2.2.71

If this IE is included the content of the Broadcast PLMNs IE in the top Served Cell Information NR IE is ignored.

YES

reject

SSB Positions In Burst

O

9.2.2.64

YES

ignore

NR Cell PRACH Configuration

O

OCTET STRING

Containing 9.3.1.139 NR Cell PRACH Configuration as of TS 38.473 [41].

YES

ignore

CSI-RS Transmission Indication

O

ENUMERATED (activated, deactivated, …)

This IE indicates the CSI-RS transmission status of the given cell.

If the Additional Measurement Timing Configuration List IE is present, this IE is ignored.

YES

ignore

SFN Offset

O

9.2.2.75

YES

ignore

Supported MBS FSA ID List

0..<maxnoofMBSFSAs>

Shall contain all MBS Frequency Selection Area Identities associated with the NR CGI.

YES

ignore

>MBS Frequency Selection Area Identity

M

OCTET STRING(3)

–

NR-U Channel Info List

0..1

YES

ignore

>NR-U Channel Info Item

1..<maxnoofNR-UChannelIDs>

–

>>NR-U Channel ID

M

INTEGER (1.. maxnoofNR-UChannelIDs, …)

Index to uniquely identify the part of the NR-U Channel Bandwidth consisting of a contiguous set of resource blocks (RBs) on which a channel access procedure is performed in shared spectrum.

Value 1 represents the first part of the NR-U Channel Bandwidth on which a channel access procedure is performed. Value 2 represents the second part of the NR-U Channel Bandwidth on which a channel access procedure is performed, and so on.

–

>>NR ARFCN

M

INTEGER (0.. maxNRARFCN)

It represents the centre frequency of the NR-U Channel Bandwidth for NR bands restricted to operation with shared spectrum channel access, as defined in TS 37.213 [51]. Allowed values are specified in 38.101-1 [52] in Table 5.4.2.3-2, Table 5.4.2.3-3 and Table 5.4.2.3-4.

–

>>Bandwidth

M

ENUMERATED (10MHz, 20MHz, 40MHz, 60MHz, 80MHz, …)

–

Additional Measurement Timing Configuration List

O

1 .. <maxnoofMTCItems>

YES

ignore

>Measurement Timing Configuration Index

M

INTEGER (0..16)

“0” refers to the configuration contained in the Measurement Timing Configuration IE.

Any value between “1” and “16” refers to a configuration within the Additional Measurement Timing Configuration List IE.

–

>CSI- RS MTC Configuration List

M

1 .. <maxnoofCSIRSconfigurations>

This list explicitly expresses the CSI-RS configurations contained in the MTC

–

>>CSI-RS Index

M

INTEGER (0..95)

Index of CSI-RS as in MTC

–

>>CSI-RS Status

M

ENUMERATED (activated, deactivated, …)

This IE indicates the CSI-RS transmission status of the configuration.

–

>>CSI-RS Neighbour List

O

1 .. <maxnoofCSIRSneighbourCells>

This list expresses the cells and CSI-RSs neighbouring the CSI-RS in the CSI-RS Index IE.

–

>>>NR CGI

M

9.2.2.7

–

>>>CSI-RS MTC Neighbour List

O

1 .. < maxnoofCSIRSneighbourCellsInMTC>

This list expresses the CSI-RSs served by the NR CGI, which are neighbouring the CSI-RS of the served cell and contained in the MTC indicated by the neighbouring NR cell.

–

>>>>CSI-RS Index

M

INTEGER (0..95)

–

RedCap Broadcast Information

O

BIT STRING (SIZE(8))

The presence of this IE indicates that the intraFreqReselectionRedCap IE is broadcast in SIB1 of the corresponding cell, see TS 38.331 [10].

Each position in the bitmap indicates which RedCap UEs are allowed access, according to the setting of RedCap barring indicators in SIB1, see TS 38.331 [10].

First bit = 1Rx,

second bit = 2Rx,

third bit = halfDuplex,

other bits reserved for future use. Value ‘1’ indicates ‘access allowed’. Value ‘0’ indicates ‘access not allowed”.

YES

ignore

maxnoofBPLMNs

Maximum no. of broadcast PLMNs by a cell. Value is 12.

maxnoofMBSFSAs

Maximum no. of MBS FSAs by one gNB. Value is 256.

maxnoofNR-UChannelIDs

Maximum no. NR-U channel IDs in a cell. Value is 16.

maxnoofMTCItems

Maximum no. of measurement timing configurations associated with the neighbour cell. Value is 16.

maxnoofCSIRSconfigurations

Maximum number of CSI RS configurations reported in the MTC. Value is 96

maxnoofCSIRSneighbourCells

Maximum number of cells neighbouring a CSI-RS coverage area. Value is 16

maxnoofCSIRSneighbourCellsInMTC

Maximum number of CSI-RS coverage areas neighbouring a specific CSI-RS coverage area. Value is 16

E-UTRA PCI

M

INTEGER (0..503, …)

E-UTRA Physical Cell ID

–

ECGI

M

E-UTRA CGI

9.2.2.8

–

TAC

M

9.2.2.5

Tracking Area Code

–

RANAC

O

RAN Area Code

9.2.2.6

–

Broadcast PLMNs

1..<maxnoofBPLMNs>

Broadcast PLMNs in SIB1 associated to the E-UTRA Cell Identity in the ECGI IE.

NOTE: In this version of the specification, it is possible to broadcast only up to 6 PLMN IDs.

–

>PLMN Identity

M

9.2.2.4

–

CHOICE E-UTRA-Mode-Info

M

–

>FDD

–

>>FDD Info

1

–

>>>UL EARFCN

M

E-UTRA ARFCN

9.2.2.21

Corresponds to N_UL in TS 36.104 [25] for E-UTRA operating bands for which it is defined; ignored for E-UTRA operating bands for which N_UL is not defined

–

>>>DL EARFCN

M

E-UTRA ARFCN

9.2.2.21

Corresponds to N_DL in TS 36.104 [25]

–

>>>UL E-UTRA Transmission Bandwidth

M

E-UTRA Transmission Bandwidth

9.2.2.22

Same as DL Transmission Bandwidth in this release; ignored in case UL EARFCN value is ignored

–

>>>DL E-UTRA Transmission Bandwidth

M

E-UTRA Transmission Bandwidth

9.2.2.22

–

>>>Offset of NB-IoT Channel Number to DL EARFCN

O

Offset of NB-IoT Channel Number to EARFCN

9.2.2.47

Corresponds to M_DL in TS 36.104 [25]

YES

reject

>>>Offset of NB-IoT Channel Number to UL EARFCN

O

Offset of NB-IoT Channel Number to EARFCN

9.2.2.47

Corresponds to M_UL in TS 36.104 [25]

YES

reject

>TDD

–

>>TDD Info

1

–

>>>EARFCN

M

E-UTRA ARFCN

9.2.2.21

Corresponds to N_DL/N_UL in TS 36.104 [25]

–

>>>E-UTRA Transmission Bandwidth

M

9.2.2.22

–

>>>Subframe Assignment

M

ENUMERATED (sa0, sa1, sa2, sa3, sa4, sa5, sa6, …)

Uplink-downlink subframe configuration information defined in TS 36.211 [26]

–

>>>Special Subframe Info

1

Special subframe configuration information defined in TS 36.211 [26]

–

>>>>Special Subframe Patterns

M

ENUMERATED (ssp0, ssp1, ssp2, ssp3, ssp4, ssp5, ssp6, ssp7, ssp8, ssp9, ssp10, …)

–

>>>>Cyclic Prefix DL

M

ENUMERATED (Normal, Extended,…)

–

>>>>Cyclic Prefix UL

M

ENUMERATED (Normal, Extended, …)

–

>>>Offset of NB-IoT Channel Number to DL EARFCN

O

Offset of NB-IoT Channel Number to EARFCN

9.2.2.47

Corresponds to M_DL in TS 36.104 [25]

YES

reject

>>>NB-IoT UL DL Alignment Offset

O

9.2.2.48

Corresponds to the TDD-UL-DL-AlignmentOffset-NB in TS 36.331 [14].

YES

reject

Number of Antenna Ports E-UTRA

O

9.2.2.23

–

PRACH Configuration

O

E-UTRA PRACH Configuration

9.2.2.25

–

MBSFN Subframe Info

0..<maxnoofMBSFN>

MBSFN subframe defined in TS 36.331 [14]

–

>Radioframe Allocation Period

M

ENUMERATED (n1, n2, n4, n8, n16, n32, …)

–

>Radioframe Allocation Offset

M

INTEGER (0..7, …)

–

>MBSFN Subframe Allocation E-UTRA

M

9.2.2.26

–

E-UTRA Multiband Info List

O

9.2.2.24

–

FreqBandIndicatorPriority

O

ENUMERATED (not-broadcast, broadcast, …)

This IE indicates that the eNodeB supports FreqBandIndicationPriority, and whether

FreqBandIndicatorPriority is broadcast in SIB 1 (see TS 36.331 [14])

–

BandwidthReducedSI

O

ENUMERATED (scheduled, …)

This IE indicates that the SystemInformationBlockType1-BR is scheduled in the cell (see TS 36.331 [14])

–

Protected E-UTRA Resource Indication

O

9.2.2.29

This IE indicates which E-UTRA control/reference signal resources are protected and are not subject to E-UTRA – NR Cell Resource Coordination.

–

Broadcast PLMN Identity Info List E-UTRA

0..<maxnoofEUTRABPLMNs>

This IE corresponds to the cellAccessRelatedInfoList-5GC IE in SIB1 as specified in TS 36.331 [14]. All PLMN Identities and associated information contained in the cellAccessRelatedInfoList-5GC IE are included and provided in the same order as broadcast in SIB1.

YES

ignore

>Broadcast PLMNs

1..<maxnoofEUTRABPLMNs>

Broadcast PLMNs in SIB1 associated to the E-UTRA Cell Identity IE.

–

>>PLMN Identity

M

9.2.2.4

–

>TAC

M

9.2.2.5

–

>E-UTRA Cell Identity

M

BIT STRING (SIZE(28))

–

>RANAC

O

RAN Area Code

9.2.2.6

–

NPRACH Configuration

O

NPRACH Configuration

9.2.2.74

YES

ignore

SFN Offset

O

9.2.2.75

YES

ignore

maxnoofBPLMNs

Maximum no. of broadcast PLMNs by a cell. The value is 12.

maxnoofMBSFN

Maximum no. of MBSFN frame allocation with different offset. Value is 8.

maxnoofEUTRABPLMNs

Maximum no. of PLMN Ids.broadcast in an E-UTRA cell. Value is 6.

Neighbour Information NR

1 .. <maxnoofNeighbours>

>NRPCI

M

INTEGER (0..1007)

NR Physical Cell ID

>NR CGI

M

9.2.2.7

>TAC

M

9.2.2.5

Tracking Area Code

>RANAC

O

RAN Area Code

9.2.2.6

>CHOICE NR-Mode-Info

M

>>FDD

>>>FDD Info

1

>>>>UL NR FreqInfo

M

NR Frequency Info

9.2.2.19

This IE is ignored for NR operating bands for which uplink range of N_REF is not defined in section 5.4.2.3 of TS 38.104 [24].

>>>>DL NR FreqInfo

M

NR Frequency Info

9.2.2.19

>>TDD

>>>TDD Info

1

>>>>NR FreqInfo

M

NR Frequency Info

9.2.2.19

>Connectivity Support

M

9.2.2.28

>Measurement Timing Configuration

M

OCTET STRING

Contains the MeasurementTimingConfiguration inter-node message for the neighbour cell, as defined in TS 38.331 [10].

maxnoofNeighbours

Maximum no. of neighbour cells associated to a given served cell. Value is 1024.

E-UTRA Neighbour Information E-UTRA

1 .. <maxnoofNeighbours>

>E-UTRA PCI

M

INTEGER (0..503, …)

E-UTRA Physical Cell Identifier of the neighbour cell

>ECGI

M

E-UTRA CGI

9.2.2.8

>EARFCN

M

E-UTRA ARFCN

9.2.2.21

DL EARFCN for FDD or EARFCN for TDD

>TAC

M

9.2.2.5

Tracking Area Code

>RANAC

O

RAN Area Code

9.2.2.6

maxnoofNeighbours

Maximum no. of neighbour cells associated to a given served cell. Value is 1024.

Served Cells NR To Add

0 .. < maxnoofCellsinNG-RAN node>

List of added cells served by the NG-RAN node.

GLOBAL

reject

>Served Cell Information NR

M

9.2.2.11

–

>Neighbour Information NR

O

9.2.2.13

–

>Neighbour Information E-UTRA

O

9.2.2.14

–

Served Cells To Modify NR

0 .. < maxnoofCellsinNG-RAN node>

List of modified cells served by the NG-RAN node.

YES

reject

>Old NR CGI

M

NR CGI

9.2.2.7

–

>Served Cell Information NR

M

9.2.2.11

–

>Neighbour Information NR

O

9.2.2.13

–

>Neighbour Information E-UTRA

O

9.2.2.14

–

>Deactivation Indication

O

ENUMERATED (deactivated, …)

Indicates that the concerned cell is switched off for energy saving reasons.

–

Served Cells To Delete NR

0 .. < maxnooffCellsinNG-RAN node >

List of deleted cells served by the NG-RAN node.

YES

reject

>Old NR-CGI

M

NR CGI

9.2.2.7

–

maxnoofCellsinNG-RAN node

Maximum no. cells that can be served by a NG-RAN node. Value is 16384.

Served Cells To Add E-UTRA

0 .. < maxnoofCellsinNG-RAN node>

List of added cells served by the NG-RAN node.

YES

reject

>Served Cell Information E-UTRA

M

9.2.2.12

–

>Neighbour Information NR

O

9.2.2.13

–

>Neighbour Information E-UTRA

O

9.2.2.14

–

Served Cells To Modify E-UTRA

0 .. < maxnoofCellsinNG-RAN node>

List of modified cells served by the NG-RAN node.

YES

reject

>Old ECGI

M

E-UTRA CGI

9.2.2.8

–

>Served Cell Information E-UTRA

M

9.2.2.12

–

>Neighbour Information NR

O

9.2.2.13

–

>Neighbour Information E-UTRA

O

9.2.2.14

–

>Deactivation Indication

O

ENUMERATED (deactivated, …)

Indicates that the concerned cell is switched off for energy saving reasons.

–

Served Cells To Delete E-UTRA

0 .. < maxnoofCellsinNG-RAN node >

List of deleted cells served by the NG-RAN node.

YES

reject

>Old ECGI

M

E-UTRA CGI

9.2.2.8

–

maxnoofCellsinNG-RAN node

Maximum no. cells that can be served by a NG-RAN node. Value is 16384.

CHOICE Cell Assistance Type

M

>Limited NR List

>>List of Requested NR Cells

1 .. < maxnoofCellsinNG-RAN node>

Included when the NG-RAN node requests a limited list of served NR cells.

>>>NR CGI

M

9.2.2.7

NR cell for which served NR cell information is requested.

>Full NR List

>>Complete Information Request Indicator

M

ENUMERATED (allServedCellsNR, …)

Included when the NG-RAN node requests the complete list of served cells for a gNB

maxnoofCellsinNG-RAN node

Maximum no. cells that can be served by a NG-RAN node. Value is 16384.

SUL Frequency Info

M

INTEGER (0..maxNRARFCN)

RF Reference Frequency as defined in TS 38.104 [24] section 5.4.2.1. The frequency provided in this IE identifies the absolute frequency position of the reference resource block (Common RB 0) of the SUL carrier. Its lowest subcarrier is also known as Point A.

–

SUL Transmission Bandwidth

M

NR Transmission Bandwidth

9.2.2.20

–

Carrier List

O

NR Carrier List

9.2.2.63

If included, the SUL Transmission Bandwidth IE shall be ignored.

YES

ignore

Frequency Shift 7p5khz

O

ENUMERATED (false, true, …)

Indicate whether the value of Δ_shift is 0kHz or 7.5kHz when calculating F_REF,shift as defined in Section 5.4.2.1 of TS 38.104 [24].

YES

ignore

maxNRARFCN

Maximum value of NRARFCNs. Value is 3279165.

NR ARFCN

M

INTEGER (0.. maxNRARFCN)

RF Reference Frequency as defined in TS 38.104 [24], section 5.4.2.1. The frequency provided in this IE identifies the absolute frequency position of the reference resource block (Common RB 0) of the carrier. Its lowest subcarrier is also known as Point A.

–

SUL Information

O

9.2.2.18

–

NR Frequency Band List

1

–

>NR Frequency Band Item

1..<maxnoofNRCellBands>

–

>>NR Frequency Band

M

INTEGER (1.. 1024, …)

Primary NR Operating Band as defined in TS 38.104 [24], section 5.4.2.3.

The value 1 corresponds e n1, value 2 corresponds to NR operating band n2, etc.

–

>>Supported SUL band List

0..<maxnoofNRCellBands>

–

>>>Supported SUL band Item

M

INTEGER (1.. 1024, …)

Supplementary NR Operating Band as defined in TS 38.104 [24] section 5.4.2.3 that can be used for SUL duplex mode as per TS 38.101-1 table 5.2-1.

The value 80 corresponds to NR operating band n80, value 81 corresponds to NR operating band n81, etc.

–

Frequency Shift 7p5khz

O

ENUMERATED (false, true, …)

Indicate whether the value of Δ_shift is 0kHz or 7.5kHz when calculating F_REF,shift as defined in Section 5.4.2.1 of TS 38.104 [24].

YES

ignore

maxNRARFCN

Maximum value of NRARFCNs. Value is 3279165.

maxnoofNRCellBands

Maximum no. of frequency bands supported for a NR cell. Value is 32.

NR SCS

M

ENUMERATED (scs15, scs30, scs60, scs120, …, scs480, scs960)

The values scs15, scs30, scs60 and scs120 corresponds to the sub carrier spacing in TS 38.104 [24].

NR NRB

M

ENUMERATED (nrb11, nrb18, nrb24, nrb25, nrb31, nrb32, nrb38, nrb51, nrb52, nrb65, nrb66, nrb78, nrb79, nrb93, nrb106, nrb107, nrb121, nrb132, nrb133, nrb135, nrb160, nrb162, nrb189, nrb216, nrb217, nrb245, nrb264, nrb270, nrb273, …, nrb33, nrb62, nrb124, nrb148, nrb248)

This IE is used to indicate the UL or DL transmission bandwidth expressed in units of resource blocks "N_RB" (TS 38.104 [24]). The values nrb11, nrb18, etc. correspond to the number of resource blocks "N_RB" 11, 18, etc.

E-UTRA ARFCN

M

INTEGER (0..maxEARFCN)

The relation between EARFCN and carrier frequency (in MHz) are defined in TS 36.104 [25].

maxEARFCN

Maximum value of EARFCNs. Value is 262143.

E-UTRA Transmission Bandwidth

M

ENUMERATED (bw6, bw15, bw25, bw50, bw75, bw100,… , bw1)

Number of Antenna Ports

M

ENUMERATED (an1, an2, an4,…)

an1 = One antenna port

an2 = Two antenna ports

an4 = Four antenna ports

BandInfo

1..<maxnoofEutraBands>

>Frequency Band Indicator

M

INTEGER (1.. 256, …)

E-UTRA operating band as defined in TS 36.101 [27, table 5.5-1]

maxnoofEUTRABands

Maximum number of frequency bands that an E-UTRA cell belongs to. The value is 16.

RootSequenceIndex

M

INTEGER

(0..837)

See section 5.7.2. in TS 36.211 [26]

ZeroCorrelationZoneConfiguration

M

INTEGER

(0..15)

See section 5.7.2. in TS 36.211 [26]

HighSpeedFlag

M

ENUMERATED (true, false, …)

"true" corresponds to Restricted set and "false" to Unrestricted set. See section 5.7.2 in TS 36.211 [26]

PRACH-FrequencyOffset

M

INTEGER

(0..94)

See section 5.7.1 of TS 36.211 [26]

PRACH-ConfigurationIndex

C-ifTDD

INTEGER

(0..63)

See section 5.7.1. in TS 36.211 [26]

ifTDD

This IE shall be present if the EUTRA-Mode-Info IE in the Served Cell Information E-UTRA IE is set to the value "TDD".

CHOICE Subframe Allocation

M

>oneframe

>>Oneframe Info

M

BITSTRING (SIZE(6))

>fourframes

>>Fourframes Info

M

BITSTRING (SIZE(24))

PLMN Identity

M

9.2.2.4

NG-RAN Cell Identity

M

9.2.2.9

EN-DC Support

M

ENUMERATED (Supported, Not supported, …)

Activation SFN

M

INTEGER (0..1023)

Indicates from which SFN of the receiving node the resource allocation is valid.

Protected Resource List

1

The protected resource pattern is continuously repeated, and it is valid until stated otherwise or until replaced by a new pattern. The pattern does not apply in reserved subframes.

>Protected Resource List Item

1..<maxnoofProtectedResourcePatterns>

Each item describes one transmission pattern. A pattern may comprise several control signals.

>>Resource Type

M

ENUMERATED (downlinknonCRS,CRS,uplink, …)

Indicates whether the protected resource is E-UTRA DL non-CRS, E-UTRA CRS or E-UTRA UL.

>>Intra-PRB Protected Resource Footprint

M

BIT STRING (84, …)

The bitmap of REs occupied by the protected signal within one PRB. Each position in the bitmap represents an RE in one PRB; value "0" indicates "resource not protected", value "1" indicates "resource protected ". The first bit of the string corresponds to the RE with the smallest time and frequency index in the PRB, where the indexing first goes into the frequency domain. The length of the bit string equals the product of and the length of PRB in time dimension, measured in REs. is defined in TS 36.211 [26]. The intra-PRB pattern consisting of all "1"s is equivalent to PRB-level granularity.

>>Protected Footprint Frequency Pattern

M

BIT STRING(6..110, …)

The bit string indicates in which PRBs inside carrier bandwidth the Intra-PRB Protected Resource Footprint applies. How often in time dimension this frequency pattern applies, depends on time periodicity of Intra-PRB Protected Resource Footprint. The first bit of the bit string corresponds to the PRB occupying the lowest subcarrier frequencies of the carrier bandwidth, where the indexing first goes into the frequency domain. Each position in the string represents a PRB; value "0" indicates " Intra-PRB Protected Resource Footprint does not appear in PRB", value "1" indicates "Intra-PRB Protected Resource Footprint appears in PRB". The length of the bit string equals the number of PRBs in the carrier bandwidth.

>>Protected Footprint Time Pattern

M

The description of time periodicity of the Intra-PRB Protected Resource Footprint.

>>>Protected Footprint Time-periodicity

M

INTEGER(1..320, …)

Periodicity with which the periodic Intra-PRB Protected Resource Footprint repeats in time-dimension (1= every PRB (i.e. slot), 2=every other PRB (i.e. slot) etc.

>>>Protected Footprint Start Time

M

INTEGER(1..20, …)

The time-position of the PRB inside the frame in which the periodic Intra-PRB Protected Resource Footprint appears for the first time. The value "1" corresponds to the receiving node’s slot 0 in subframe 0 in the receiving node’s radio frame where SFN = Activation SFN.

MBSFN Control Region Length

O

INTEGER(0..3)

Length of control region in MBSFN subframes. Expressed in REs, in the time dimension.

PDCCH Region Length

M

INTEGER(1..3)

Length of PDCCH region in regular subframes. Expressed in REs, in the time dimension.

maxnoofProtectedResourcePatterns

Maximum no. protected resource patterns. Value is 16.

Activation SFN

M

INTEGER (0..1023)

Indicates from which SFN of the receiving node the agreement is valid.

CHOICE Shared Resource Type

M

>UL Only Sharing

>>UL Resource Bitmap

M

Data Traffic Resources 9.2.2.31

>UL and DL Sharing

>>CHOICE UL Resources

M

>>>Unchanged

NULL

>>>Changed

>>>>UL Resource Bitmap

M

Data Traffic Resources 9.2.2.31

>>CHOICE DL Resources

M

>>>Unchanged

NULL

>>>Changed

>>>>DL Resource Bitmap

M

Data Traffic Resources 9.2.2.31

Reserved Subframe Pattern

O

9.2.2.32

Indicates subframes in which the resource allocation does not hold.

Data Traffic Resources

M

BIT STRING (6..17600)

The indication of resources allocated to E-UTRA PDSCH/PUSCH. Each position in the bit string represents a PRB pair in a subframe; value "0" indicates "resource not intended to be used for transmission", value "1" indicates "resource intended to be used for transmission ". The first bit of the bit string corresponds to the PRB pair occupying the lowest subcarrier frequencies of the carrier, where the indexing first goes into the frequency domain.

The bit string may span across multiple contiguous subframes. The first position of the Data Traffic Resources IE corresponds to the receiving node’s subframe 0 in a receiving node’s radio frame where SFN = Activation SFN.

The length of the bit string is an integer multiple of
or , defined in TS 36.211 [26].

Subframe Type

M

ENUMERATED(MBSFN, non-MBSFN, …)

Indicates what type of non-regular subframes the Reserved Subframe Pattern refers to (e.g. MBSFN).

Reserved Subframe Pattern

M

BIT STRING (10..160)

Each position in the bitmap represents a subframe.

Value ‘0’ indicates "regular subframe". Value ‘1’ indicates "reserved subframe". For MBSFN subframes, the exception refers only to the non-control region of the subframe. The bit string may span across multiple contiguous subframes. The first position of the Subframe Configuration IE corresponds to the receiving node’s subframe 0 in a receiving node’s radio frame where SFN = Activation SFN. The IE is ignored if received by the ng-eNB.

MBSFN Control Region Length

O

INTEGER(0..3)

Length of control region in MBSFN subframes. Expressed in REs, in the time dimension.

CHOICE NG-RAN Node Resource Coordination Information

M

>EUTRA

>>E-UTRA Resource Coordination Information

9.2.2.34

E-UTRA resource coordination information

>NR

>>NR Resource Coordination Information

9.2.2.35

NR resource coordination information

EUTRA Cell ID

M

E-UTRA CGI

9.2.2.8

This IE indicates the SpCell.

UL Coordination Information

M

BIT STRING (6..4400, …)

Each position in the bitmap represents a PRB pair in a subframe; value "0" indicates "PCell resource not intended to be used for transmission by the sending node", value "1" indicates "PCell resource intended to be used for transmission by the sending node". The bit string spans from the first PRB pair of the first represented subframe to the last PRB pair of the same subframe and then moves to the following PRBs in the following subframes in the same order. Each position is applicable only in positions corresponding to UL subframes or SL subframes for sidelink transmission.

The bit string may span across multiple contiguous subframes (maximum 40).

The first position of the UL Coordination Information corresponds to subframe 0 in a radio frame where SFN = 0.

The length of the bit string is an integer multiple of .  is defined in TS 36.211 [26].

The UL Coordination Information is continuously repeated.

DL Coordination Information

O

BIT STRING (6..4400, …)

Each position in the bitmap represents a PRB pair in a subframe; value "0" indicates "PCell resource not intended to be used for transmission by the sending node", value "1" indicates "PCell resource intended to be used for transmission by the sending node". The bit string spans from the first PRB pair of the first represented subframe to the last PRB pair of the same subframe and then moves to the following PRBs in the following subframes in the same order. Each position is applicable only in positions corresponding to DL subframes.

The bit string may span across multiple contiguous subframes (maximum 40). The first position of the DL Coordination Information corresponds to the receiving node’s subframe 0 in a receiving node’s radio frame where SFN = 0.

The length of the bit string is an integer multiple of INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET . INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET  is defined in TS 36.211 [26].

The DL Coordination Information is continuously repeated.

NR CGI

O

9.2.2.7

This IE indicates the assumed SpCell.

E-UTRA Coordination Assistance Information

O

9.2.2.36

NR CGI

M

9.2.2.7

This IE indicates the SpCell.

UL Coordination Information

M

BIT STRING (6..4400, …)

Each position in the bitmap represents a PRB pair in a subframe; value "0" indicates "SpCell resource not intended to be used for transmission by the sending node", value "1" indicates "SpCell resource intended to be used for transmission by the sending node". The bit string spans from the first PRB pair of the first represented subframe to the last PRB pair of the same subframe and then moves to the following PRBs in the following subframes in the same order. Each position is applicable only in positions corresponding to UL subframes or SL subframes for sidelink transmission.

The bit string may span across multiple contiguous subframes (maximum 40). The first position of the UL Coordination Information corresponds to the receiving node’s subframe 0 in a receiving node’s radio frame where SFN = 0.

The length of the bit string is an integer multiple of

. is defined in TS 36.211 [26].

The UL Coordination Information is continuously repeated.

DL Coordination Information

O

BIT STRING (6..4400, …)

Each position in the bitmap represents a PRB pair in a subframe; value "0" indicates "SpCell resource not intended to be used for transmission by the sending node", value "1" indicates "SpCell resource intended to be used for transmission by the sending node". The bit string spans from the first PRB pair of the first represented subframe to the last PRB pair of the same subframe and then moves to the following PRBs in the following subframes in the same order. Each position is applicable only in positions corresponding to DL subframes.

The bit string may span across multiple contiguous subframes (maximum 40). The first position of the DL Coordination Information corresponds to the receiving node’s subframe 0 in a receiving node’s radio frame where SFN = 0.

The length of the bit string is an integer multiple of INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET . INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET INCLUDEPICTURE "cid:image006.png@01D3588C.BC08DEC0" \* MERGEFORMATINET  is defined in TS 36.211 [26].

The DL Coordination Information is continuously repeated.

EUTRA Cell ID

O

ECGI

9.2.2.8

Reference cell for UL Coordination Information IE and DL Coordination Information IE.

NR Coordination Assistance Information

O

9.2.2.37

E-UTRA Coordination Assistance Information

M

ENUMERATED(Coordination Not Required, …)

NR Coordination Assistance Information

M

ENUMERATED(Coordination Not Required, …)

Subframe Assignment

M

ENUMERATED(sa0, sa1, sa2, sa3, sa4, sa5, sa6)

Indicates DL/UL subframe configuration where sa0 points to Configuration 0, sa1 to Configuration 1 etc. as specified in TS 36.331 [14].

Harq Offset

M

INTEGER (0..9)

Indicates a HARQ subframe offset that is applied to the subframes designated as UL in the associated subframe assignment, see TS 36.331 [14]

Interface Instance Indication

M

INTEGER (0..255, …)

Configured TAC Indication

M

ENUMERATED (true, …)

NR SCS

M

ENUMERATED (scs15, scs30, scs60, scs120, …, scs480, scs960)

The values scs15, scs30, scs60 and scs120 corresponds to the sub carrier spacing in TS 38.104 [24].

–

NR Cyclic Prefix

M

ENUMERATED (Normal, Extended, …)

The type of cyclic prefix, which determines the number of symbols in a slot.

–

NR DL-UL Transmission Periodicity

M

ENUMERATED (ms0p5, ms0p625, ms1, ms1p25, ms2, ms2p5, ms3, ms4, ms5, ms10, ms20, ms40, ms60, ms80, ms100, ms120, ms140, ms160, …)

The periodicity is expressed in the format msXpYZ, and equals X.YZ milliseconds.

–

Slot Configuration List

1

–

>Slot Configuration List Item

1..<maxnoofslots>

–

>>Slot Index

INTEGER (0.. 5119)

–

>>CHOICE Symbol Allocation in Slot

M

–

>>>All DL

–

>>>All UL

–

>>>Both DL and UL

–

>>>>Number of DL Symbols

M

INTEGER (0..13)

Number of consecutive DL symbols in the slot identified by Slot Index. If extended cyclic prefix is used, the maximum value is 11. The Permutation IE indicates the location of DL symbols in the slot.

–

>>>>Number of UL Symbols

M

INTEGER (0..13)

Number of consecutive UL symbols in the slot identified by Slot Index. If extended cyclic prefix is used, the maximum value is 11. The Permutation IE indicates the location of UL symbols in the slot.

–

>>>>Permutation

O

ENUMERATED (DFU, UFD, …)

If not present, the default value is DFU.

YES

ignore

maxnoofslots

Maximum length of number of slots in a 10-ms period. Value is 5120.

Maximum Cell List Size

O

9.2.2.44

Cell Assistance Information NR

O

9.2.2.17

Maximum Cell List Size

O

9.2.2.44

Cell Assistance Information E-UTRA

O

9.2.2.43

CHOICE Cell Assistance Type

M

>Limited EUTRA List

>>List of Requested E-UTRA Cells

1 .. < maxnoofCellsinNG-RAN node>

Included when the NG-RAN node requests a limited list of served E-UTRA cells.

>>>E-UTRA CGI

M

9.2.2.7

E-UTRA cell for which served E-UTRA cell information is requested.

>Full E-UTRA List

>>Complete Information Request Indicator

M

ENUMERATED (allServedCellsE-UTRA, …)

Included when the NG-RAN node requests the complete list of served cells for a ng-eNB

maxnoofCellsinNG-RAN node

Maximum no. cells that can be served by a NG-RAN node. Value is 16384.

Maximum Cell List Size

M

INTEGER (0..16384, …)

Maximum Cell List Size

M

9.2.2.44

Partial List Indicator

M

ENUMERATED (partial, …)

Offset of NB-IoT Channel Number to EARFCN

M

ENUMERATED (-10, -9, -8.5, -8, -7, -6, -5, -4.5, -4, -3, -2, -1, -0.5, 0, 1, 2, 3, 3.5, 4, 5, 6, 7, 7.5, 8, 9, …)

NB-IoT UL DL Alignment Offset

M

ENUMERATED (-7.5, 0, 7.5, …)

Unit: kHz

DL TNL Offered Capacity

M

INTEGER (1.. 16777216,…)

Maximum capacity offered by the transport portion of the cell in kbps

DL TNL Available Capacity

M

INTEGER (0.. 100, …)

Available capacity over the transport portion serving the cell in percentage. Value 100 corresponds to the offered capacity.

UL TNL Offered Capacity

M

INTEGER (1.. 16777216, …)

Maximum capacity offered by the transport portion of the cell in kbps

UL TNL Available Capacity

M

INTEGER (0.. 100, …)

Available capacity over the transport portion serving the cell in percentage. Value 100 corresponds to the offered capacity.

CHOICE Radio Resource Status Type

M

–

>ng-eNB

–

>>DL GBR PRB usage

M

INTEGER (0..100)

Per cell DL GBR PRB usage

–

>>UL GBR PRB usage

M

INTEGER (0..100)

Per cell UL GBR PRB usage

–

>>DL non-GBR PRB usage

M

INTEGER (0..100)

Per cell DL non-GBR PRB usage

–

>>UL non-GBR PRB usage

M

INTEGER (0..100)

Per cell UL non-GBR PRB usage

–

>>DL Total PRB usage

M

INTEGER (0..100)

Per cell DL Total PRB usage

–

>>UL Total PRB usage

M

INTEGER (0..100)

Per cell UL Total PRB usage

–

>>DL scheduling PDCCH CCE usage

O

INTEGER (0..100)

YES

ignore

>>UL scheduling PDCCH CCE usage

O

INTEGER (0..100)

YES

ignore

>gNB

–

>>SSB Area Radio Resource Status List

1

–

>>>SSB Area Radio Resource Status Item

1..<maxnoofSSBAreas>

–

>>>>SSB Index

M

INTEGER (0..63)

–

>>>>SSB Area DL GBR PRB usage

M

INTEGER (0..100)

Per SSB area DL GBR PRB usage in percentage of the cell total PRB number.

–

>>>>SSB Area UL GBR PRB usage

M

INTEGER (0..100)

Per SSB area UL GBR PRB usage in percentage of the cell total PRB number.

–

>>>>SSB Area DL non-GBR PRB usage

M

INTEGER (0..100)

Per SSB area DL non-GBR PRB usage in percentage of the cell total PRB number.

–

>>>>SSB Area UL non-GBR PRB usage

M

INTEGER (0..100)

Per SSB area UL non-GBR PRB usage in percentage of the cell total PRB number.

–

>>>>SSB Area DL Total PRB usage

M

INTEGER (0..100)

Per SSB area DL Total PRB usage in percentage of the cell total PRB number.

–

>>>>SSB Area UL Total PRB usage

M

INTEGER (0..100)

Per SSB area UL Total PRB usage in percentage of the cell total PRB number.

–

>>>>DL scheduling PDCCH CCE usage

O

INTEGER (0..100)

YES

ignore

>>>>UL scheduling PDCCH CCE usage

O

INTEGER (0..100)

YES

ignore

>>Slice Radio Resource Status List

0..1

YES

ignore

>>>Slice Radio Resource Status Item

1..< maxnoofBPLMNs >

–

>>>>PLMN Identity

M

9.2.2.4

–

>>>>S-NSSAI Radio Resource Status List

1

–

>>>>>S-NSSAI Radio Resource Status Item

1..<maxnoofSliceItems>

–

>>>>>>S-NSSAI

M

9.2.3.21

–

>>>>>>Slice DL GBR PRB usage

M

INTEGER (0..100)

Per slice DL GBR PRB usage in percentage of the cell total PRB number.

–

>>>>>>Slice UL GBR PRB usage

M

INTEGER (0..100)

Per slice UL GBR PRB usage in percentage of the cell total PRB number.

–

>>>>>>Slice DL non-GBR PRB usage

M

INTEGER (0..100)

Per slice DL non-GBR PRB usage in percentage of the cell total PRB number.

–

>>>>>>Slice UL non-GBR PRB usage

M

INTEGER (0..100)

Per slice UL non-GBR PRB usage in percentage of the cell total PRB number.

–

>>>>>>Slice DL Total PRB allocation

M

INTEGER (0..100)

Total amount of DL PRBs available per cell for the slice if all the resources the slice could access were usable.

–

>>>>>>Slice UL Total PRB allocation

M

INTEGER (0..100)

Total amount of UL PRBs available per cell for the slice if all the resources the slice could access were usable.

–

>>MIMO PRB usage Information

O

YES

ignore

>>>DL GBR PRB usage for MIMO

M

INTEGER (0..100)

Per cell DL GBR PRB usage for MIMO in percentage of the cell total PRB number as defined in TS 38.314 [42].

–

>>>UL GBR PRB usage for MIMO

M

INTEGER (0..100)

Per cell UL GBR PRB usage for MIMO in percentage of the cell total PRB number as defined in TS 38.314 [42].

–

>>>DL non-GBR PRB usage for MIMO

M

INTEGER (0..100)

Per cell DL non-GBR PRB usage for MIMO in percentage of the cell total PRB number as defined in TS 38.314 [42].

–

>>>UL non-GBR PRB usage for MIMO

M

INTEGER (0..100)

Per cell UL non-GBR PRB usage for MIMO in percentage of the cell total PRB number as defined in TS 38.314 [42].

–

>>>DL Total PRB usage for MIMO

M

INTEGER (0..100)

Per cell DL Total PRB usage for MIMO in percentage of the cell total PRB number as defined in TS 38.314 [42].

–

>>>UL Total PRB usage for MIMO

M

INTEGER (0..100)

Per cell UL Total PRB usage for MIMO in percentage of the cell total PRB number as defined in TS 38.314 [42].

–

maxnoofSSBAreas

Maximum no. SSB Areas that can be served by a NG-RAN node cell. Value is 64.

maxnoofSliceItems

Maximum no. of signalled slice support items. Value is 1024.

maxnoofBPLMNs

Maximum no. of broadcast PLMNs by a cell. Value is 12.

Composite Available Capacity Downlink

M

Composite Available Capacity

9.2.2.52

For the Downlink

–

Composite Available Capacity Uplink

M

Composite Available Capacity

9.2.2.52

For the Uplink, including both NUL and SUL (if available)

–

Composite Available Capacity Supplementary Uplink

O

Composite Available Capacity

9.2.2.52

For the SUL

YES

ignore

Cell Capacity Class Value

O

9.2.2.53

Capacity Value

M

9.2.2.54

‘0’ indicates no resource is available, Measured on a linear scale.

Capacity Class Value

M

INTEGER (1..100,…)

Value 1 indicates the minimum cell capacity, and 100 indicates the maximum cell capacity. There should be a linear relation between cell capacity and Cell Capacity Class Value.

Capacity Value

M

INTEGER (0..100)

Value 0 indicates no available capacity, and 100 indicates maximum available capacity with respect to the whole cell. Capacity Value should be measured on a linear scale.

SSB Area Capacity Value List

0..1

>SSB Area Capacity Value Item

1..<maxnoofSSBAreas>

>>SSB Index

M

INTEGER (0..63)

>>SSB Area Capacity Value

M

INTEGER (0..100)

Value 0 indicates no available capacity, and 100 indicates maximum available capacity . SSB Area Capacity Value should be measured on a linear scale.

maxnoofSSBAreas

Maximum no. SSB Areas that can be served by a NG-RAN node cell. Value is 64.

Slice Available Capacity

1..< maxnoofBPLMNs >

>PLMN Identity

M

9.2.2.4

Broadcast PLMN

>S-NSSAI Available Capacity List

1

>>S-NSSAI Available Capacity Item

M

1 .. < maxnoofSliceItems>

>>>S-NSSAI

9.2.3.21

>>>Slice Available Capacity Value Downlink

O

INTEGER (0..100)

Value 0 indicates no available capacity, and 100 indicates maximum available capacity . Slice Available Capacity Value Downlink should be measured on a linear scale.

>>>Slice Available Capacity Value Uplink

O

INTEGER (0..100)

Value 0 indicates no available capacity, and 100 indicates maximum available capacity. Slice Available Capacity Value Uplink should be measured on a linear scale.

maxnoofSliceItems

Maximum no. of signalled slice support items. Value is 1024.

maxnoofBPLMNs

Maximum no. of PLMN Ids.broadcast in a cell. Value is 12.

Number of RRC Connections

M

9.2.2.57

Available RRC Connection Capacity Value

M

9.2.2.58

Number of RRC Connections

M

INTEGER (1..65536,…)

Available RRC Connection Capacity Value

M

INTEGER (0..100)

Value 0 indicates no available capacity, and 100 indicates maximum available capacity with respect to the whole cell. Capacity Value should be measured on a linear scale.

CHOICE type

M

>NR

>>NR UE RLF Report Container

M

OCTET STRING

nr-RLF-Report-r16 IE contained in the UEInformationResponse message defined in TS 38.331 [10].

>LTE

>>LTE UE RLF Report Container

M

OCTET STRING

RLF-Report-r9 IE contained in the UEInformationResponse message defined in TS 36.331 [14]

Handover Trigger Change

M

INTEGER (-20 .. 20)

The actual value is IE value * 0.5 dB.

Handover Trigger Change Lower Limit

M

INTEGER (-20 .. 20)

The actual value is IE value * 0.5 dB.

Handover Trigger Change Upper Limit

M

INTEGER (-20 .. 20)

The actual value is IE value * 0.5 dB.

Mean number of Active UEs

M

INTEGER (0..16777215, …)

As defined in TS 38.314 [42] and where value "1" is equivalent to 0.1 Active UEs, value "2" is equivalent to 0.2 Active UEs, value n is equivalent to n/10 Active UEs.

NR Carrier Item

1..<maxnoofNRSCSs>

>NR SCS

M

ENUMERATED (scs15, scs30, scs60, scs120, …, scs480, scs960)

SCS for the corresponding carrier.

>Offset to Carrier

M

INTEGER (0.. 2199, …)

Offset in frequency domain between Point A (lowest subcarrier of common RB 0) and the lowest usable subcarrier on this carrier in number of PRBs (using the NR SCS IE defined for this carrier). The maximum value corresponds to 275×8−1. See TS 38.211 [39], clause 4.4.2.

>Carrier Bandwidth

M

INTEGER (1.. maxnoofPhysicalResourceBlocks, …)

Width of this carrier in number of PRBs (using the NR SCS IE defined for this carrier). See TS 38.211 [39], clause 4.4.2.

maxnoofNRSCSs

Maximum no. of SCS-specific carriers per TDD, per DL, per UL or per SUL of an NR cell. Value is 5.

maxnoofPhysicalResourceBlocks

Maximum no. of Physical Resource Blocks. Value is 275.

CHOICE ssb-PositionsInBurst

M

The first/ leftmost bit corresponds to SS/PBCH block index 0, the second bit corresponds to SS/PBCH block index 1, and so on. Value 0 in the bitmap indicates that the corresponding SS/PBCH block is not transmitted while value 1 indicates that the corresponding SS/PBCH block is transmitted.

>ShortBitmap

>>ShortBitmap

M

BIT STRING (SIZE(4))

>MediumBitmap

>>MediumBitmap

M

BIT STRING (SIZE(8))

>LongBitmap

>>LongBitmap

M

BIT STRING (SIZE(64))

NID

M

BIT STRING (SIZE(44))

CAG-Identifier

M

BIT STRING (SIZE(32))

Broadcast NID List

1..<maxnoofNIDs>

>NID

M

9.2.2.65

maxnoofNIDs

Maximum no. of NIDs broadcast in a cell. Value is 12.

Broadcast SNPN ID List

1..<maxnoofSNPNIDs>

>PLMN Identity

M

9.2.2.4

>Broadcast NID List

M

9.2.2.67

maxnoofSNPNIDs

Maximum no. of SNPN IDs broadcast in a cell. Value is 12.

Broadcast CAG-Identifier List

1..<maxnoofCAGs>

>CAG-Identifier

M

9.2.2.66

maxnoofCAGs

Maximum no. of CAG-Identifiers broadcast in a cell. Value is 12.

Broadcast PNI-NPN ID Information

1..<maxnoofBPLMNs>

Broadcast PLMNs

>PLMN Identity

M

9.2.2.4

>Broadcast CAG-Identifier List

M

9.2.2.69

maxnoofBPLMNs

Maximum no. of broadcast PLMNs by a cell. Value is 12.

CHOICE NPN Broadcast Information per PLMN

M

>SNPN Information

>>Broadcast SNPN ID List

M

9.2.2.68

>PNI-NPN Information

>>Broadcast PNI-NPN ID Information

M

9.2.2.70

CHOICE NPN Support

M

>SNPN

>>NID

M

9.2.2.65

This IE is associated with the PLMN Identity and the TAI Slice Support List contained in the TAI Support List IE.

Together with the PLMN Identity it identifiers the SNPN supported in the corresponding Tracking Area by the NG-RAN node.

PLMN Identity

M

9.2.2.4

CHOICE Cell Type

M

>NG-RAN E-UTRA

>>E-UTRA Cell Identity

M

BIT STRING (SIZE(28))

The leftmost bits of the E-UTRA Cell Identity IE correspond to the ng-eNB ID (defined in subclause 9.2.2.2).

>NG-RAN NR

>>NR Cell Identity

M

BIT STRING (SIZE(36))

The leftmost bits of the NR Cell Identity IE correspond to the gNB ID (defined in subclause 9.2.2.1).

>E-UTRAN

>>E-UTRAN Cell Identity

M

BIT STRING (SIZE(28))

The leftmost bits of the E-UTRAN Cell Identity IE value correspond to the eNB ID (defined in section 9.2.22 in TS 36.423 [44]).

CHOICE FDDorTDD

M

>FDD

>>NPRACH-CP-Length

M

ENUMERATED (us66dot7, us266dot7, …)

>>Anchor Carrier NPRACH Configuration

M

OCTET STRING

Includes the NPRACH-ParametersList-NB-r13 IE as defined in 6.7.3.2 of TS 36.331 [14].

>>Anchor Carrier EDT NPRACH Configuration

O

OCTET STRING

Includes the NPRACH-ParametersList-NB-r14 IE as defined in 6.7.3.2 of TS 36.331 [14].

>>Anchor Carrier Format 2 NPRACH Configuration

O

OCTET STRING

Includes the NPRACH-ParametersListFmt2-NB-r15 IE as defined in 6.7.3.2 of TS 36.331 [14].

>>Anchor Carrier Format 2 EDT NPRACH Configuration

O

OCTET STRING

Includes the NPRACH-ParametersListFmt2-NB-r15 IE as defined in 6.7.3.2 of TS 36.331 [14].

>>Non Anchor Carrier NPRACH Configuration

O

OCTET STRING

Includes the UL-ConfigCommonList-NB-r14 IE as defined in 6.7.3.1 of TS 36.331 [14].

>>Non Anchor Carrier Format 2 NPRACH Configuration

O

OCTET STRING

Includes the UL-ConfigCommonList-NB-v1530 IE as defined in 6.7.3.1 of TS 36.331 [14].

>TDD

>>NPRACH-PreambleFormat

M

ENUMERATED (fmt0, fmt1, fmt2, fmt0-a, fmt1-a, …)

>>Anchor Carrier NPRACH Configuration TDD

M

OCTET STRING

Includes the NPRACH-ParametersListTDD-NB-r15 IE as defined in 6.7.3.2 of TS 36.331 [14].

>>Non Anchor Carrier Frequency Configuration list

0..< maxnoofNonAnchorCarrierFreqConfig>

>>>Non Anchor Carrier Frequency

M

OCTET STRING

Includes the DL-CarrierConfigCommon-NB-r14 IE as defined in 6.7.3.2 of TS 36.331 [14].

>>Non Anchor Carrier NPRACH Configuration TDD

O

OCTET STRING

Includes the UL-ConfigCommonListTDD-NB-r15 IE as defined in 6.7.3.1 of TS 36.331 [14].

maxnoofNonAnchorCarrierFreqConfig

Maximum no. of non-Anchor Carrier Frequency Configurations. Value is 15.

SFN Time Offset

M

BIT STRING (SIZE(24))

Time offset in microseconds between the absolute time reference "1980-01-06 T00:00:19 International Atomic Time (TAI)” and the SFN0 start. The maximum usable value is (1024*10^4-1). Values higher than the maximum are discarded.

CHO Candidate Cell List

1

>CHO Candidate Cell Item

1 .. <maxnoofCellsinCHO>

>>CHO Candidate Cell ID

M

Global NG-RAN Cell Identity

9.2.2.27

>>CHO Execution Condition List

1

>>>CHO Execution Condition Item

1 .. <maxnoofCHOexecutioncond>

>>>>MeasObject Container

M

OCTET STRING

MeasObjectToAddMod contained in the RRCReconfiguration message (TS 38.331 [10]), which is configured for the CHO candidate cell

>>>>ReportConfig Container

M

OCTET STRING

ReportConfigToAddMod contained in the RRCReconfiguration message (TS 38.331 [10]), which is configured for the CHO candidate cell

maxnoofCellsinCHO

Maximum no. cells that can be prepared for a conditional handover. Value is 8.

maxnoofCHOexecutioncond

Maximum no. execution conditions for a conditional handover. Value is 2.

SSB Index

M

INTEGER (0..63)

SSB Triggering Offset

M

Mobility Parameters Information 9.2.2.60

SSB Index

M

INTEGER (0..63)

SSB Mobility Parameters Modification Range

M

Mobility Parameters Modification Range 9.2.2.61

IAB-MT Cell List

1

>IAB-MT Cell Item

1 .. <maxnoofServingCells>

>>NR Cell Identity

M

BIT STRING (SIZE(36))

Cell identity of a serving cell configured for a co-located IAB-MT.

>>DU_RX/MT_RX

M

ENUMERATED (supported, not supported, supported and FDM required, …)

An indication of whether the IAB-node supports simultaneous reception at its DU and MT side.

>>DU_TX/MT_TX

M

ENUMERATED (supported, not supported, supported and FDM required, …)

An indication of whether the IAB-node supports simultaneous transmission at its DU and MT side.

>>DU_TX/MT_RX

M

ENUMERATED (supported, not supported, supported and FDM required, …)

An indication of whether the IAB-node supports simultaneous transmission at its DU and reception at its MT side.

>>DU_RX/MT_TX

M

ENUMERATED (supported, not supported, supported and FDM required, …)

An indication of whether the IAB-node supports simultaneous reception at its DU and transmission at its MT side.

maxnoofServingCells

Maximum no. of serving cells for an IAB-MT. Value is 32, as defined by the maxNrofServingCells in TS 38.331 [10].

Traffic Index

M

INTEGER (1..1024,…)

CHOICE Traffic type

M

>UP Traffic

>>QoS Parameters

M

9.2.3.5

>Non-UP Traffic

>>Non-UP Traffic

M

9.2.2.100

F1-terminating BH information list

1

>F1-terminating BH Information item IEs

1..<maxnoofBHInfo>

>>BH Info Index

M

INTEGER (1.. maxnoofBHInfo)

>>DL TNL Address

O

IAB TNL Address

9.2.2.92

>>DL F1 Terminating BH Info

0..1

This IE indicates the BH information for DL traffic of a descendant node.

>>> Egress BAP Routing ID

M

BAP Routing ID

9.2.2.87

>>> Egress BH RLC CH ID

M

BH RLC Channel ID

9.2.2.88

>>UL F1 Terminating BH Info

0..1

This IE indicates the BH information for UL traffic of a descendant node.

>>>Ingress BAP Routing ID

M

BAP Routing ID

9.2.2.87

>>>Ingress BH RLC CH ID

M

BH RLC Channel ID

9.2.2.88

maxnoofBHInfo

Maximum no. of BH information corresponding to one Traffic Index assigned to the traffic offloaded to the non-F1-terminating IAB-donor. The value is 1024.

Non-F1-terminating BH Information List

1

>Non-F1-terminating BH Information Item IEs

1..<maxnoofBHInfo>

>> BH Info Index

M

INTEGER (1.. maxnoofBHInfo)

>>DL Non-F1 Terminating BH Info

0..1

This IE indicates the BH information for DL traffic

>>>Ingress BAP Routing ID

M

BAP Routing ID

9.2.2.87

>>>Ingress BH RLC CH ID

M

BH RLC Channel ID

9.2.2.88

>>>Prior-hop BAP Address

M

BAP Address

9.2.2.89

>>>IAB QoS Mapping Information

O

9.2.2.91

>>UL Non-F1 Terminating BH Info

0..1

This IE indicates the BH information for UL traffic

>>>Egress BAP Routing ID

M

BAP Routing ID

9.2.2.87

>>>Egress BH RLC CH ID

M

BH RLC Channel ID

9.2.2.88

>>>Next-hop BAP Address

M

BAP Address

9.2.2.89

BAP Control PDU RLC CH List

0..1

>BAP Control PDU RLC CH Item IEs

1..<maxnoofBAPControlPDURLCCHs>

>>BH RLC CH ID

M

BH RLC Channel ID

9.2.2.88

>>Next-hop BAP Address

M

BAP Address

9.2.2.89

maxnoofBHInfo

Maximum no. of BH information corresponding to one Traffic Index assigned to the traffic offloaded to the non-F1-terminating IAB-donor. The value is 1024.

maxnoofBAPControlPDURLCCHs

Maximum no. of BH RLC CHs to be used for the boundary IAB-node and its parent node in the non-F1-terminating topology. The value is 2.

CHOICE Traffic Release type

M

>Full Release

>>All Traffic Indication

M

ENUMERATED (true, ..)

>Partial Release

>>Traffic To Be Released List

1

>>>Traffic To Be Released Item IE

1 .. <maxnoofTrafficIndexEntries>

>>>>Traffic Index

M

9.2.2.80

>>>>BH Info List

O

9.2.2.99

maxnoofTrafficIndexEntries

Maximum no. of traffic offloaded to the non-F1-terminating IAB-donor. The value is 1024.

IAB IPv4 Addresses Requested

O

IAB TNL Addresses Requested

9.2.2.93

CHOICE IAB IPv6 Request Type

O

>IPv6 Address

>>IAB IPv6 Addresses Requested

M

IAB TNL Addresses Requested

9.2.2.93

>IPv6 Prefix

>>IAB IPv6 Address Prefixes Requested

M

IAB TNL Addresses Requested

9.2.2.93

IAB TNL Address To Remove List

0..1

>IAB TNL Address To Remove Item

1..<maxnoofTLAsIAB>

>>IAB TNL Address

M

9.2.2.92

maxnoofTLAsIAB

Maximum total no. of IPv4 address(es), IPv6 address(es) and IPv6 address prefix(es) that can be requested in one procedure execution. The value is 1024.

IAB Allocated TNL Address List

1

>IAB Allocated TNL Address Item

1..<maxnoofTLAsIAB>

>>IAB TNL Address

M

9.2.2.92

>>IAB TNL Address Usage

O

ENUMERATED (F1-C, F1-U, Non-F1, All, …)

Indicates the usage of the allocated IPv4 or IPv6 address or IPv6 address prefix.

>>Associated Donor DU Address

O

BAP Address

9.2.2.89

maxnoofTLAsIAB

Maximum total no. of IPv4 address(es), IPv6 address(es) and IPv6 address prefix(es) that can be requested in one procedure execution. The value is 1024.

BAP Address

M

9.2.2.89

Path ID

M

BAP Path ID

9.2.2.90

BH RLC CH ID

M

BIT STRING (SIZE(16))

BAP Address

M

BIT STRING (SIZE(10))

Corresponds to the bap-Address-r16, defined in subclause 6.2.2 or subclause 6.3.2 of TS 38.331 [10], or the iab-donor-DU-BAP-address-r16 defined in subclause 6.2.2 of TS 38.331[10].

BAP Path ID

M

BIT STRING (SIZE(10))

Corresponds to the Bap-Pathid-r16 defined in subclause 6.3.2 of TS 38.331 [10].

DSCP

O

BIT STRING (SIZE(6))

Flow Label

O

BIT STRING (SIZE(20))

CHOICE IAB TNL Address

M

>IPv4

>>IPv4 Address

M

BIT STRING (SIZE(32))

The IPv4 address allocated to an IAB-node.

>IPv6

>>IPv6 Address

M

BIT STRING (SIZE(128))

The IPv6 address allocated to an IAB-node.

>IPv6prefix

>>IPv6 Prefix

M

BIT STRING (SIZE(64))

The IPv6 address prefix allocated to an IAB-node.

TNL Addresses or Prefixes Requested – All Traffic

O

INTEGER (1..256)

The number of TNL addresses/ IPv6 prefixes requested for all traffic.

TNL Addresses or Prefixes Requested – F1-C traffic

O

INTEGER (1..256)

The number of TNL addresses/IPv6 prefixes requested for F1-C traffic.

TNL Addresses or Prefixes Requested – F1-U traffic

O

INTEGER (1..256)

The number of TNL addresses/ IPv6 prefixes requested for F1-U traffic.

TNL Addresses or Prefixes Requested – Non-F1 traffic

O

INTEGER (1..256)

The number of TNL addresses/ IPv6 prefixes requested for non-F1 traffic.

NR CGI

M

9.2.2.7

CHOICE IAB-DU Cell Resource Configuration-Mode-Info

O

>TDD

>>TDD Info

1

>>>gNB-DU Cell Resource Configuration-TDD

M

gNB-DU Cell Resource Configuration

9.2.2.95

Contains TDD resource configuration of gNB-DU’s cell.

>>>Frequency Info

O

NR Frequency Info

9.2.2.19

>>>Transmission Bandwidth

O

NR Transmission Bandwidth

9.2.2.20

>>>Carrier List

O

NR Carrier List

9.2.2.63

If included, the Transmission Bandwidth IE shall be ignored.

>FDD

>>FDD Info

1

>>>gNB-DU Cell Resource Configuration-FDD-UL

M

gNB-DU Cell Resource Configuration

9.2.2.95

Contains FDD UL resource configuration of gNB-DU’s cell.

>>>gNB-DU Cell Resource Configuration-FDD-DL

M

gNB-DU Cell Resource Configuration

9.2.2.95

Contains FDD DL resource configuration of gNB-DU’s cell.

>>>UL Frequency Info

O

NR Frequency Info

9.2.2.19

>>>DL Frequency Info

O

NR Frequency Info

9.2.2.19

>>>UL Transmission Bandwidth

O

NR Transmission Bandwidth

9.2.2.20

>>>DL Transmission Bandwidth

O

NR Transmission Bandwidth

9.2.2.20

>>>UL Carrier List

O

NR Carrier List

9.2.2.63

If included, the UL Transmission Bandwidth IE shall be ignored.

>>>DL Carrier List

O

NR Carrier List

9.2.2.63

If included, the DL Transmission Bandwidth IE shall be ignored.

IAB STC Info

O

9.2.2.96

STC configuration of child-node IAB-DU’s cell.

RACH Config Common

O

OCTET STRING

Corresponds to the rach-ConfigCommon as defined in subclause 6.3.2 of TS 38.331 [10].

RACH Config Common IAB

O

OCTET STRING

Corresponds to the IAB-specific rach-ConfigCommonIAB-r16 as defined in subclause 6.3.2 of TS 38.331 [10].

CSI-RS Configuration

O

OCTET STRING

Corresponds to the NZP-CSI-RS-Resource as defined in subclause 6.3.2 of TS 38.331 [10].

SR Configuration

O