8.3.2 S-NG-RAN node Reconfiguration Completion
38.4233GPPNG-RANRelease 17TSXn Application Protocol (XnAP)
8.3.2.1 General
The purpose of the S-NG-RAN node Reconfiguration Completion procedure is to provide information to the S-NG-RAN node whether the requested configuration was successfully applied by the UE.
The procedure uses UE-associated signalling.
8.3.2.2 Successful Operation
Figure 8.3.2.2-1: S-NG-RAN node Reconfiguration Complete procedure, successful operation.
The M-NG-RAN node initiates the procedure by sending the S-NODE RECONFIGURATION COMPLETE message to the S-NG-RAN node.
The S-NODE RECONFIGURATION COMPLETE message may contain information that
– either the UE has successfully applied the configuration requested by the S-NG-RAN node. The M-NG-RAN node may also provide configuration information in the M-NG-RAN node to S-NG-RAN node Container IE.
– or the configuration requested by the S-NG-RAN node has been rejected. The M-NG-RAN node shall provide information with sufficient precision in the included Cause IE to enable the S-NG-RAN node to know the reason for an unsuccessful reconfiguration. The M-NG-RAN node may also provide configuration information in the M-NG-RAN node to S-NG-RAN node Container IE.
Upon reception of the S-NODE RECONFIGURATION COMPLETE message the S-NG-RAN node shall stop the timer TXnDCoverall if TXnDCoverall is running.
8.3.2.3 Abnormal Conditions
Void.