6.4 RRC multiplicity and type constraint values

38.3313GPPNRProtocol specificationRadio Resource Control (RRC)Release 17TS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

– Multiplicity and type constraint definitions

— ASN1START

— TAG-MULTIPLICITY-AND-TYPE-CONSTRAINT-DEFINITIONS-START

maxAdditionalRACH-r17 INTEGER ::= 256 — Maximum number of additional RACH configurations.

maxAI-DCI-PayloadSize-r16 INTEGER ::= 128 –Maximum size of the DCI payload scrambled with ai-RNTI

maxAI-DCI-PayloadSize-1-r16 INTEGER ::= 127 –Maximum size of the DCI payload scrambled with ai-RNTI minus 1

maxBandComb INTEGER ::= 65536 — Maximum number of DL band combinations

maxBandsUTRA-FDD-r16 INTEGER ::= 64 — Maximum number of bands listed in UTRA-FDD UE caps

maxBH-RLC-ChannelID-r16 INTEGER ::= 65536 — Maximum value of BH RLC Channel ID

maxBT-IdReport-r16 INTEGER ::= 32 — Maximum number of Bluetooth IDs to report

maxBT-Name-r16 INTEGER ::= 4 — Maximum number of Bluetooth name

maxCAG-Cell-r16 INTEGER ::= 16 — Maximum number of NR CAG cell ranges in SIB3, SIB4

maxTwoPUCCH-Grp-ConfigList-r16 INTEGER ::= 32 — Maximum number of supported configuration(s) of {primary PUCCH group

— config, secondary PUCCH group config}

maxTwoPUCCH-Grp-ConfigList-r17 INTEGER ::= 16 — Maximum number of supported configuration(s) of {primary PUCCH group

— config, secondary PUCCH group config} for PUCCH cell switching

maxCBR-Config-r16 INTEGER ::= 8 — Maximum number of CBR range configurations for sidelink communication

— congestion control

maxCBR-Config-1-r16 INTEGER ::= 7 — Maximum number of CBR range configurations for sidelink communication

— congestion control minus 1

maxCBR-Level-r16 INTEGER ::= 16 — Maximum number of CBR levels

maxCBR-Level-1-r16 INTEGER ::= 15 — Maximum number of CBR levels minus 1

maxCellExcluded INTEGER ::= 16 — Maximum number of NR exclude-listed cell ranges in SIB3, SIB4

maxCellGroupings-r16 INTEGER ::= 32 — Maximum number of cell groupings for NR-DC

maxCellHistory-r16 INTEGER ::= 16 — Maximum number of visited PCells reported

maxPSCellHistory-r17 INTEGER ::= 16 — Maximum number of visited PSCells across all reported PCells

maxCellInter INTEGER ::= 16 — Maximum number of inter-Freq cells listed in SIB4

maxCellIntra INTEGER ::= 16 — Maximum number of intra-Freq cells listed in SIB3

maxCellMeasEUTRA INTEGER ::= 32 — Maximum number of cells in E-UTRAN

maxCellMeasIdle-r16 INTEGER ::= 8 — Maximum number of cells per carrier for idle/inactive measurements

maxCellMeasUTRA-FDD-r16 INTEGER ::= 32 — Maximum number of cells in FDD UTRAN

maxCellNTN-r17 INTEGER ::= 4 — Maximum number of NTN neighbour cells for which assistance information is

— provided

maxCarrierTypePairList-r16 INTEGER ::= 16 — Maximum number of supported carrier type pair of (carrier type on which

— CSI measurement is performed, carrier type on which CSI reporting is

— performed) for CSI reporting cross PUCCH group

maxCellAllowed INTEGER ::= 16 — Maximum number of NR allow-listed cell ranges in SIB3, SIB4

maxEARFCN INTEGER ::= 262143 — Maximum value of E-UTRA carrier frequency

maxEUTRA-CellExcluded INTEGER ::= 16 — Maximum number of E-UTRA exclude-listed physical cell identity ranges

— in SIB5

maxEUTRA-NS-Pmax INTEGER ::= 8 — Maximum number of NS and P-Max values per band

maxFeatureCombPreamblesPerRACHResource-r17 INTEGER ::= 256 — Maximum number of feature combination preambles.

maxLogMeasReport-r16 INTEGER ::= 520 — Maximum number of entries for logged measurements

maxMultiBands INTEGER ::= 8 — Maximum number of additional frequency bands that a cell belongs to

maxNARFCN INTEGER ::= 3279165 — Maximum value of NR carrier frequency

maxNR-NS-Pmax INTEGER ::= 8 — Maximum number of NS and P-Max values per band

maxFreqIdle-r16 INTEGER ::= 8 — Maximum number of carrier frequencies for idle/inactive measurements

maxNrofServingCells INTEGER ::= 32 — Max number of serving cells (SpCells + SCells)

maxNrofServingCells-1 INTEGER ::= 31 — Max number of serving cells (SpCells + SCells) minus 1

maxNrofAggregatedCellsPerCellGroup INTEGER ::= 16

maxNrofAggregatedCellsPerCellGroupMinus4-r16 INTEGER ::= 12

maxNrofDUCells-r16 INTEGER ::= 512 — Max number of cells configured on the collocated IAB-DU

maxNrofAppLayerMeas-r17 INTEGER ::= 16 — Max number of simultaneous application layer measurements

maxNrofAppLayerMeas-1-r17 INTEGER ::= 15 — Max number of simultaneous application layer measurements minus 1

maxNrofAvailabilityCombinationsPerSet-r16 INTEGER ::= 512 — Max number of AvailabilityCombinationId used in the DCI format 2_5

maxNrofAvailabilityCombinationsPerSet-1-r16 INTEGER ::= 511 — Max number of AvailabilityCombinationId used in the DCI format 2_5 minus 1

maxNrofIABResourceConfig-r17 INTEGER ::= 65536 — Max number of IAB-ResourceConfigID used in MAC CE

maxNrofIABResourceConfig-1-r17 INTEGER ::= 65535 — Max number of IAB-ResourceConfigID used in MAC CE minus 1

maxNrofSCellActRS-r17 INTEGER ::= 255 — Max number of RS configurations per SCell for SCell activation

maxNrofSCells INTEGER ::= 31 — Max number of secondary serving cells per cell group

maxNrofCellMeas INTEGER ::= 32 — Maximum number of entries in each of the cell lists in a measurement object

maxNrofCRS-IM-InterfCell-r17 INTEGER ::= 8 — Maximum number of LTE interference cells for CRS-IM per UE

maxNrofRelayMeas-r17 INTEGER ::= 32 — Maximum number of L2 U2N Relay UEs to measure for each measurement object

— on sidelink frequency

maxNrofCG-SL-r16 INTEGER ::= 8 — Max number of sidelink configured grant

maxNrofCG-SL-1-r16 INTEGER ::= 7 — Max number of sidelink configured grant minus 1

maxSL-GC-BC-DRX-QoS-r17 INTEGER ::= 16 — Max number of sidelink DRX configurations for NR

— sidelink groupcast/broadcast communication

maxNrofSL-RxInfoSet-r17 INTEGER ::= 4 — Max number of sidelink DRX configuration sets in sidelink DRX assistant

— information

maxNrofSS-BlocksToAverage INTEGER ::= 16 — Max number for the (max) number of SS blocks to average to determine cell measurement

maxNrofCondCells-r16 INTEGER ::= 8 — Max number of conditional candidate SpCells

maxNrofCondCells-1-r17 INTEGER ::= 7 — Max number of conditional candidate SpCells minus 1

maxNrofCSI-RS-ResourcesToAverage INTEGER ::= 16 — Max number for the (max) number of CSI-RS to average to determine cell measurement

maxNrofDL-Allocations INTEGER ::= 16 — Maximum number of PDSCH time domain resource allocations

maxNrofPDU-Sessions-r17 INTEGER ::= 256 — Maximum number of PDU Sessions

maxNrofSR-ConfigPerCellGroup INTEGER ::= 8 — Maximum number of SR configurations per cell group

maxLCG-ID INTEGER ::= 7 — Maximum value of LCG ID

maxLCG-ID-IAB-r17 INTEGER ::= 255 — Maximum value of LCG ID for IAB-MT

maxLC-ID INTEGER ::= 32 — Maximum value of Logical Channel ID

maxLC-ID-Iab-r16 INTEGER ::= 65855 — Maximum value of BH Logical Channel ID extension

maxLTE-CRS-Patterns-r16 INTEGER ::= 3 — Maximum number of additional LTE CRS rate matching patterns

maxNrofTAGs INTEGER ::= 4 — Maximum number of Timing Advance Groups

maxNrofTAGs-1 INTEGER ::= 3 — Maximum number of Timing Advance Groups minus 1

maxNrofBWPs INTEGER ::= 4 — Maximum number of BWPs per serving cell

maxNrofCombIDC INTEGER ::= 128 — Maximum number of reported MR-DC combinations for IDC

maxNrofSymbols-1 INTEGER ::= 13 — Maximum index identifying a symbol within a slot (14 symbols, indexed from 0..13)

maxNrofSlots INTEGER ::= 320 — Maximum number of slots in a 10 ms period

maxNrofSlots-1 INTEGER ::= 319 — Maximum number of slots in a 10 ms period minus 1

maxNrofPhysicalResourceBlocks INTEGER ::= 275 — Maximum number of PRBs

maxNrofPhysicalResourceBlocks-1 INTEGER ::= 274 — Maximum number of PRBs minus 1

maxNrofPhysicalResourceBlocksPlus1 INTEGER ::= 276 — Maximum number of PRBs plus 1

maxNrofControlResourceSets INTEGER ::= 12 — Max number of CoReSets configurable on a serving cell

maxNrofControlResourceSets-1 INTEGER ::= 11 — Max number of CoReSets configurable on a serving cell minus 1

maxNrofControlResourceSets-1-r16 INTEGER ::= 15 — Max number of CoReSets configurable on a serving cell extended in minus 1

maxNrofCoresetPools-r16 INTEGER ::= 2 — Maximum number of CORESET pools

maxCoReSetDuration INTEGER ::= 3 — Max number of OFDM symbols in a control resource set

maxNrofSearchSpaces-1 INTEGER ::= 39 — Max number of Search Spaces minus 1

maxNrofSearchSpacesLinks-1-r17 INTEGER ::= 39 — Max number of Search Space links minus 1

maxNrofBFDResourcePerSet-r17 INTEGER ::= 64 — Max number of reference signal in one BFD set

maxSFI-DCI-PayloadSize INTEGER ::= 128 — Max number payload of a DCI scrambled with SFI-RNTI

maxSFI-DCI-PayloadSize-1 INTEGER ::= 127 — Max number payload of a DCI scrambled with SFI-RNTI minus 1

maxIAB-IP-Address-r16 INTEGER ::= 32 — Max number of assigned IP addresses

maxINT-DCI-PayloadSize INTEGER ::= 126 — Max number payload of a DCI scrambled with INT-RNTI

maxINT-DCI-PayloadSize-1 INTEGER ::= 125 — Max number payload of a DCI scrambled with INT-RNTI minus 1

maxNrofRateMatchPatterns INTEGER ::= 4 — Max number of rate matching patterns that may be configured

maxNrofRateMatchPatterns-1 INTEGER ::= 3 — Max number of rate matching patterns that may be configured minus 1

maxNrofRateMatchPatternsPerGroup INTEGER ::= 8 — Max number of rate matching patterns that may be configured in one group

maxNrofCSI-ReportConfigurations INTEGER ::= 48 — Maximum number of report configurations

maxNrofCSI-ReportConfigurations-1 INTEGER ::= 47 — Maximum number of report configurations minus 1

maxNrofCSI-ResourceConfigurations INTEGER ::= 112 — Maximum number of resource configurations

maxNrofCSI-ResourceConfigurations-1 INTEGER ::= 111 — Maximum number of resource configurations minus 1

maxNrofAP-CSI-RS-ResourcesPerSet INTEGER ::= 16

maxNrOfCSI-AperiodicTriggers INTEGER ::= 128 — Maximum number of triggers for aperiodic CSI reporting

maxNrofReportConfigPerAperiodicTrigger INTEGER ::= 16 — Maximum number of report configurations per trigger state for aperiodic reporting

maxNrofNZP-CSI-RS-Resources INTEGER ::= 192 — Maximum number of Non-Zero-Power (NZP) CSI-RS resources

maxNrofNZP-CSI-RS-Resources-1 INTEGER ::= 191 — Maximum number of Non-Zero-Power (NZP) CSI-RS resources minus 1

maxNrofNZP-CSI-RS-ResourcesPerSet INTEGER ::= 64 — Maximum number of NZP CSI-RS resources per resource set

maxNrofNZP-CSI-RS-ResourceSets INTEGER ::= 64 — Maximum number of NZP CSI-RS resource sets per cell

maxNrofNZP-CSI-RS-ResourceSets-1 INTEGER ::= 63 — Maximum number of NZP CSI-RS resource sets per cell minus 1

maxNrofNZP-CSI-RS-ResourceSetsPerConfig INTEGER ::= 16 — Maximum number of resource sets per resource configuration

maxNrofNZP-CSI-RS-ResourcesPerConfig INTEGER ::= 128 — Maximum number of resources per resource configuration

maxNrofZP-CSI-RS-Resources INTEGER ::= 32 — Maximum number of Zero-Power (ZP) CSI-RS resources

maxNrofZP-CSI-RS-Resources-1 INTEGER ::= 31 — Maximum number of Zero-Power (ZP) CSI-RS resources minus 1

maxNrofZP-CSI-RS-ResourceSets-1 INTEGER ::= 15

maxNrofZP-CSI-RS-ResourcesPerSet INTEGER ::= 16

maxNrofZP-CSI-RS-ResourceSets INTEGER ::= 16

maxNrofCSI-IM-Resources INTEGER ::= 32 — Maximum number of CSI-IM resources

maxNrofCSI-IM-Resources-1 INTEGER ::= 31 — Maximum number of CSI-IM resources minus 1

maxNrofCSI-IM-ResourcesPerSet INTEGER ::= 8 — Maximum number of CSI-IM resources per set

maxNrofCSI-IM-ResourceSets INTEGER ::= 64 — Maximum number of NZP CSI-IM resource sets per cell

maxNrofCSI-IM-ResourceSets-1 INTEGER ::= 63 — Maximum number of NZP CSI-IM resource sets per cell minus 1

maxNrofCSI-IM-ResourceSetsPerConfig INTEGER ::= 16 — Maximum number of CSI IM resource sets per resource configuration

maxNrofCSI-SSB-ResourcePerSet INTEGER ::= 64 — Maximum number of SSB resources in a resource set

maxNrofCSI-SSB-ResourceSets INTEGER ::= 64 — Maximum number of CSI SSB resource sets per cell

maxNrofCSI-SSB-ResourceSets-1 INTEGER ::= 63 — Maximum number of CSI SSB resource sets per cell minus 1

maxNrofCSI-SSB-ResourceSetsPerConfig INTEGER ::= 1 — Maximum number of CSI SSB resource sets per resource configuration

maxNrofCSI-SSB-ResourceSetsPerConfigExt INTEGER ::= 2 — Maximum number of CSI SSB resource sets per resource configuration

— extended

maxNrofFailureDetectionResources INTEGER ::= 10 — Maximum number of failure detection resources

maxNrofFailureDetectionResources-1 INTEGER ::= 9 — Maximum number of failure detection resources minus 1

maxNrofFailureDetectionResources-1-r17 INTEGER ::= 63 — Maximum number of the enhanced failure detection resources minus 1

maxNrofFreqSL-r16 INTEGER ::= 8 — Maximum number of carrier frequency for NR sidelink communication

maxNrofSL-BWPs-r16 INTEGER ::= 4 — Maximum number of BWP for NR sidelink communication

maxFreqSL-EUTRA-r16 INTEGER ::= 8 — Maximum number of EUTRA anchor carrier frequency for NR sidelink communication

maxNrofSL-MeasId-r16 INTEGER ::= 64 — Maximum number of sidelink measurement identity (RSRP) per destination

maxNrofSL-ObjectId-r16 INTEGER ::= 64 — Maximum number of sidelink measurement objects (RSRP) per destination

maxNrofSL-ReportConfigId-r16 INTEGER ::= 64 — Maximum number of sidelink measurement reporting configuration(RSRP) per destination

maxNrofSL-PoolToMeasureNR-r16 INTEGER ::= 8 — Maximum number of resource pool for NR sidelink measurement to measure for

— each measurement object (for CBR)

maxFreqSL-NR-r16 INTEGER ::= 8 — Maximum number of NR anchor carrier frequency for NR sidelink communication

maxNrofSL-QFIs-r16 INTEGER ::= 2048 — Maximum number of QoS flow for NR sidelink communication per UE

maxNrofSL-QFIsPerDest-r16 INTEGER ::= 64 — Maximum number of QoS flow per destination for NR sidelink communication

maxNrofObjectId INTEGER ::= 64 — Maximum number of measurement objects

maxNrofPageRec INTEGER ::= 32 — Maximum number of page records

maxNrofPCI-Ranges INTEGER ::= 8 — Maximum number of PCI ranges

maxPLMN INTEGER ::= 12 — Maximum number of PLMNs broadcast and reported by UE at establishment

maxTAC-r17 INTEGER ::= 12 — Maximum number of Tracking Area Codes to which a cell belongs to

maxNrofCSI-RS-ResourcesRRM INTEGER ::= 96 — Maximum number of CSI-RS resources per cell for an RRM measurement object

maxNrofCSI-RS-ResourcesRRM-1 INTEGER ::= 95 — Maximum number of CSI-RS resources per cell for an RRM measurement object

— minus 1.

maxNrofMeasId INTEGER ::= 64 — Maximum number of configured measurements

maxNrofQuantityConfig INTEGER ::= 2 — Maximum number of quantity configurations

maxNrofCSI-RS-CellsRRM INTEGER ::= 96 — Maximum number of cells with CSI-RS resources for an RRM measurement object

maxNrofSL-Dest-r16 INTEGER ::= 32 — Maximum number of destination for NR sidelink communication and discovery

maxNrofSL-Dest-1-r16 INTEGER ::= 31 — Highest index of destination for NR sidelink communication and discovery

maxNrofSLRB-r16 INTEGER ::= 512 — Maximum number of radio bearer for NR sidelink communication per UE

maxSL-LCID-r16 INTEGER ::= 512 — Maximum number of RLC bearer for NR sidelink communication per UE

maxSL-SyncConfig-r16 INTEGER ::= 16 — Maximum number of sidelink Sync configurations

maxNrofRXPool-r16 INTEGER ::= 16 — Maximum number of Rx resource pool for NR sidelink communication and

— discovery

maxNrofTXPool-r16 INTEGER ::= 8 — Maximum number of Tx resource pool for NR sidelink communication and

— discovery

maxNrofPoolID-r16 INTEGER ::= 16 — Maximum index of resource pool for NR sidelink communication and

— discovery

maxNrofSRS-PathlossReferenceRS-r16 INTEGER ::= 64 — Maximum number of RSs used as pathloss reference for SRS power control.

maxNrofSRS-PathlossReferenceRS-1-r16 INTEGER ::= 63 — Maximum number of RSs used as pathloss reference for SRS power control

— minus 1.

maxNrofSRS-ResourceSets INTEGER ::= 16 — Maximum number of SRS resource sets in a BWP.

maxNrofSRS-ResourceSets-1 INTEGER ::= 15 — Maximum number of SRS resource sets in a BWP minus 1.

maxNrofSRS-PosResourceSets-r16 INTEGER ::= 16 — Maximum number of SRS Positioning resource sets in a BWP.

maxNrofSRS-PosResourceSets-1-r16 INTEGER ::= 15 — Maximum number of SRS Positioning resource sets in a BWP minus 1.

maxNrofSRS-Resources INTEGER ::= 64 — Maximum number of SRS resources.

maxNrofSRS-Resources-1 INTEGER ::= 63 — Maximum number of SRS resources minus 1.

maxNrofSRS-PosResources-r16 INTEGER ::= 64 — Maximum number of SRS Positioning resources.

maxNrofSRS-PosResources-1-r16 INTEGER ::= 63 — Maximum number of SRS Positioning resources minus 1.

maxNrofSRS-ResourcesPerSet INTEGER ::= 16 — Maximum number of SRS resources in an SRS resource set

maxNrofSRS-TriggerStates-1 INTEGER ::= 3 — Maximum number of SRS trigger states minus 1, i.e., the largest code point.

maxNrofSRS-TriggerStates-2 INTEGER ::= 2 — Maximum number of SRS trigger states minus 2.

maxRAT-CapabilityContainers INTEGER ::= 8 — Maximum number of interworking RAT containers (incl NR and MRDC)

maxSimultaneousBands INTEGER ::= 32 — Maximum number of simultaneously aggregated bands

maxULTxSwitchingBandPairs INTEGER ::= 32 — Maximum number of band pairs supporting dynamic UL Tx switching in a band

— combination.

maxNrofSlotFormatCombinationsPerSet INTEGER ::= 512 — Maximum number of Slot Format Combinations in a SF-Set.

maxNrofSlotFormatCombinationsPerSet-1 INTEGER ::= 511 — Maximum number of Slot Format Combinations in a SF-Set minus 1.

maxNrofTrafficPattern-r16 INTEGER ::= 8 — Maximum number of Traffic Pattern for NR sidelink communication.

maxNrofPUCCH-Resources INTEGER ::= 128

maxNrofPUCCH-Resources-1 INTEGER ::= 127

maxNrofPUCCH-ResourceSets INTEGER ::= 4 — Maximum number of PUCCH Resource Sets

maxNrofPUCCH-ResourceSets-1 INTEGER ::= 3 — Maximum number of PUCCH Resource Sets minus 1.

maxNrofPUCCH-ResourcesPerSet INTEGER ::= 32 — Maximum number of PUCCH Resources per PUCCH-ResourceSet

maxNrofPUCCH-P0-PerSet INTEGER ::= 8 — Maximum number of P0-pucch present in a p0-pucch set

maxNrofPUCCH-PathlossReferenceRSs INTEGER ::= 4 — Maximum number of RSs used as pathloss reference for PUCCH power control.

maxNrofPUCCH-PathlossReferenceRSs-1 INTEGER ::= 3 — Maximum number of RSs used as pathloss reference for PUCCH power control

— minus 1.

maxNrofPUCCH-PathlossReferenceRSs-r16 INTEGER ::= 64 — Maximum number of RSs used as pathloss reference for PUCCH power control

— extended.

maxNrofPUCCH-PathlossReferenceRSs-1-r16 INTEGER ::= 63 — Maximum number of RSs used as pathloss reference for PUCCH power control

— minus 1 extended.

maxNrofPUCCH-PathlossReferenceRSs-1-r17 INTEGER ::= 7 — Maximum number of RSs used as pathloss reference for PUCCH power control

— minus 1.

maxNrofPUCCH-PathlossReferenceRSsDiff-r16 INTEGER ::= 60 — Difference between the extended maximum and the non-extended maximum

maxNrofPUCCH-ResourceGroups-r16 INTEGER ::= 4 — Maximum number of PUCCH resources groups.

maxNrofPUCCH-ResourcesPerGroup-r16 INTEGER ::= 128 — Maximum number of PUCCH resources in a PUCCH group.

maxNrofPowerControlSetInfos-r17 INTEGER ::= 8 — Maximum number of PUCCH power control set infos

maxNrofMultiplePUSCHs-r16 INTEGER ::= 8 — Maximum number of multiple PUSCHs in PUSCH TDRA list

maxNrofP0-PUSCH-AlphaSets INTEGER ::= 30 — Maximum number of P0-pusch-alpha-sets (see TS 38.213 [13], clause 7.1)

maxNrofP0-PUSCH-AlphaSets-1 INTEGER ::= 29 — Maximum number of P0-pusch-alpha-sets minus 1 (see TS 38.213 [13], clause 7.1)

maxNrofPUSCH-PathlossReferenceRSs INTEGER ::= 4 — Maximum number of RSs used as pathloss reference for PUSCH power control.

maxNrofPUSCH-PathlossReferenceRSs-1 INTEGER ::= 3 — Maximum number of RSs used as pathloss reference for PUSCH power control

— minus 1.

maxNrofPUSCH-PathlossReferenceRSs-r16 INTEGER ::= 64 — Maximum number of RSs used as pathloss reference for PUSCH power control

— extended

maxNrofPUSCH-PathlossReferenceRSs-1-r16 INTEGER ::= 63 — Maximum number of RSs used as pathloss reference for PUSCH power control

— extended minus 1

maxNrofPUSCH-PathlossReferenceRSsDiff-r16 INTEGER ::= 60 — Difference between maxNrofPUSCH-PathlossReferenceRSs-r16 and

— maxNrofPUSCH-PathlossReferenceRSs

maxNrofNAICS-Entries INTEGER ::= 8 — Maximum number of supported NAICS capability set

maxBands INTEGER ::= 1024 — Maximum number of supported bands in UE capability.

maxBandsMRDC INTEGER ::= 1280

maxBandsEUTRA INTEGER ::= 256

maxCellReport INTEGER ::= 8

maxDRB INTEGER ::= 29 — Maximum number of DRBs (that can be added in DRB-ToAddModList).

maxFreq INTEGER ::= 8 — Max number of frequencies.

maxFreqLayers INTEGER ::= 4 — Max number of frequency layers.

maxFreqPlus1 INTEGER ::= 9 — Max number of frequencies for Slicing.

maxFreqIDC-r16 INTEGER ::= 128 — Max number of frequencies for IDC indication.

maxCombIDC-r16 INTEGER ::= 128 — Max number of reported UL CA for IDC indication.

maxFreqIDC-MRDC INTEGER ::= 32 — Maximum number of candidate NR frequencies for MR-DC IDC indication

maxNrofCandidateBeams INTEGER ::= 16 — Max number of PRACH-ResourceDedicatedBFR in BFR config.

maxNrofCandidateBeams-r16 INTEGER ::= 64 — Max number of candidate beam resources in BFR config.

maxNrofCandidateBeamsExt-r16 INTEGER ::= 48 — Max number of PRACH-ResourceDedicatedBFR in the CandidateBeamRSListExt

maxNrofPCIsPerSMTC INTEGER ::= 64 — Maximum number of PCIs per SMTC.

maxNrofQFIs INTEGER ::= 64

maxNrofResourceAvailabilityPerCombination-r16 INTEGER ::= 256

maxNrOfSemiPersistentPUSCH-Triggers INTEGER ::= 64 — Maximum number of triggers for semi persistent reporting on PUSCH

maxNrofSR-Resources INTEGER ::= 8 — Maximum number of SR resources per BWP in a cell.

maxNrofSlotFormatsPerCombination INTEGER ::= 256

maxNrofSpatialRelationInfos INTEGER ::= 8

maxNrofSpatialRelationInfos-plus-1 INTEGER ::= 9

maxNrofSpatialRelationInfos-r16 INTEGER ::= 64

maxNrofSpatialRelationInfosDiff-r16 INTEGER ::= 56 — Difference between maxNrofSpatialRelationInfos-r16 and maxNrofSpatialRelationInfos

maxNrofIndexesToReport INTEGER ::= 32

maxNrofIndexesToReport2 INTEGER ::= 64

maxNrofSSBs-r16 INTEGER ::= 64 — Maximum number of SSB resources in a resource set.

maxNrofSSBs-1 INTEGER ::= 63 — Maximum number of SSB resources in a resource set minus 1.

maxNrofS-NSSAI INTEGER ::= 8 — Maximum number of S-NSSAI.

maxNrofTCI-StatesPDCCH INTEGER ::= 64

maxNrofTCI-States INTEGER ::= 128 — Maximum number of TCI states.

maxNrofTCI-States-1 INTEGER ::= 127 — Maximum number of TCI states minus 1.

maxUL-TCI-r17 INTEGER ::= 64 — Maximum number of TCI states.

maxUL-TCI-1-r17 INTEGER ::= 63 — Maximum number of TCI states minus 1.

maxNrofAdditionalPCI-r17 INTEGER ::= 7 — Maximum number of additional PCI

maxMPE-Resources-r17 INTEGER ::= 64 — Maximum number of pooled MPE resources

maxNrofUL-Allocations INTEGER ::= 16 — Maximum number of PUSCH time domain resource allocations.

maxQFI INTEGER ::= 63

maxRA-CSIRS-Resources INTEGER ::= 96

maxRA-OccasionsPerCSIRS INTEGER ::= 64 — Maximum number of RA occasions for one CSI-RS

maxRA-Occasions-1 INTEGER ::= 511 — Maximum number of RA occasions in the system

maxRA-SSB-Resources INTEGER ::= 64

maxSCSs INTEGER ::= 5

maxSecondaryCellGroups INTEGER ::= 3

maxNrofServingCellsEUTRA INTEGER ::= 32

maxMBSFN-Allocations INTEGER ::= 8

maxNrofMultiBands INTEGER ::= 8

maxCellSFTD INTEGER ::= 3 — Maximum number of cells for SFTD reporting

maxReportConfigId INTEGER ::= 64

maxNrofCodebooks INTEGER ::= 16 — Maximum number of codebooks supported by the UE

maxNrofCSI-RS-ResourcesExt-r16 INTEGER ::= 16 — Maximum number of codebook resources supported by the UE for eType2/Codebook combo

maxNrofCSI-RS-ResourcesExt-r17 INTEGER ::= 8 — Maximum number of codebook resources for fetype2Rank1 and fetype2Rank2

maxNrofCSI-RS-Resources INTEGER ::= 7 — Maximum number of codebook resources supported by the UE

maxNrofCSI-RS-ResourcesAlt-r16 INTEGER ::= 512 — Maximum number of alternative codebook resources supported by the UE

maxNrofCSI-RS-ResourcesAlt-1-r16 INTEGER ::= 511 — Maximum number of alternative codebook resources supported by the UE minus 1

maxNrofSRI-PUSCH-Mappings INTEGER ::= 16

maxNrofSRI-PUSCH-Mappings-1 INTEGER ::= 15

maxSIB INTEGER::= 32 — Maximum number of SIBs

maxSI-Message INTEGER::= 32 — Maximum number of SI messages

maxSIB-MessagePlus1-r17 INTEGER::= 33 — Maximum number of SIB messages plus 1

maxPO-perPF INTEGER ::= 4 — Maximum number of paging occasion per paging frame

maxPEI-perPF-r17 INTEGER ::= 4 — Maximum number of PEI occasion per paging frame

maxAccessCat-1 INTEGER ::= 63 — Maximum number of Access Categories minus 1

maxBarringInfoSet INTEGER ::= 8 — Maximum number of access control parameter sets

maxCellEUTRA INTEGER ::= 8 — Maximum number of E-UTRA cells in SIB list

maxEUTRA-Carrier INTEGER ::= 8 — Maximum number of E-UTRA carriers in SIB list

maxPLMNIdentities INTEGER ::= 8 — Maximum number of PLMN identities in RAN area configurations

maxDownlinkFeatureSets INTEGER ::= 1024 — (for NR DL) Total number of FeatureSets (size of the pool)

maxUplinkFeatureSets INTEGER ::= 1024 — (for NR UL) Total number of FeatureSets (size of the pool)

maxEUTRA-DL-FeatureSets INTEGER ::= 256 — (for E-UTRA) Total number of FeatureSets (size of the pool)

maxEUTRA-UL-FeatureSets INTEGER ::= 256 — (for E-UTRA) Total number of FeatureSets (size of the pool)

maxFeatureSetsPerBand INTEGER ::= 128 — (for NR) The number of feature sets associated with one band.

maxPerCC-FeatureSets INTEGER ::= 1024 — (for NR) Total number of CC-specific FeatureSets (size of the pool)

maxFeatureSetCombinations INTEGER ::= 1024 — (for MR-DC/NR)Total number of Feature set combinations (size of the pool)

maxInterRAT-RSTD-Freq INTEGER ::= 3

maxGIN-r17 INTEGER ::= 24 — Maximum number of broadcast GINs

maxHRNN-Len-r16 INTEGER ::= 48 — Maximum length of HRNNs

maxNPN-r16 INTEGER ::= 12 — Maximum number of NPNs broadcast and reported by UE at establishment

maxNrOfMinSchedulingOffsetValues-r16 INTEGER ::= 2 — Maximum number of min. scheduling offset (K0/K2) configurations

maxK0-SchedulingOffset-r16 INTEGER ::= 16 — Maximum number of slots configured as min. scheduling offset (K0)

maxK2-SchedulingOffset-r16 INTEGER ::= 16 — Maximum number of slots configured as min. scheduling offset (K2)

maxK0-SchedulingOffset-r17 INTEGER ::= 64 — Maximum number of slots configured as min. scheduling offset (K0)

maxK2-SchedulingOffset-r17 INTEGER ::= 64 — Maximum number of slots configured as min. scheduling offset (K2)

maxDCI-2-6-Size-r16 INTEGER ::= 140 — Maximum size of DCI format 2-6

maxDCI-2-7-Size-r17 INTEGER ::= 43 — Maximum size of DCI format 2-7

maxDCI-2-6-Size-1-r16 INTEGER ::= 139 — Maximum DCI format 2-6 size minus 1

maxNrofUL-Allocations-r16 INTEGER ::= 64 — Maximum number of PUSCH time domain resource allocations

maxNrofP0-PUSCH-Set-r16 INTEGER ::= 2 — Maximum number of P0 PUSCH set(s)

maxOnDemandSIB-r16 INTEGER ::= 8 — Maximum number of SIB(s) that can be requested on-demand

maxOnDemandPosSIB-r16 INTEGER ::= 32 — Maximum number of posSIB(s) that can be requested on-demand

maxCI-DCI-PayloadSize-r16 INTEGER ::= 126 — Maximum number of the DCI size for CI

maxCI-DCI-PayloadSize-1-r16 INTEGER ::= 125 — Maximum number of the DCI size for CI minus 1

maxUu-RelayRLC-ChannelID-r17 INTEGER ::= 32 — Maximum value of Uu Relay RLC channel ID

maxWLAN-Id-Report-r16 INTEGER ::= 32 — Maximum number of WLAN IDs to report

maxWLAN-Name-r16 INTEGER ::= 4 — Maximum number of WLAN name

maxRAReport-r16 INTEGER ::= 8 — Maximum number of RA procedures information to be included in the RA report

maxTxConfig-r16 INTEGER ::= 64 — Maximum number of sidelink transmission parameters configurations

maxTxConfig-1-r16 INTEGER ::= 63 — Maximum number of sidelink transmission parameters configurations minus 1

maxPSSCH-TxConfig-r16 INTEGER ::= 16 — Maximum number of PSSCH TX configurations

maxNrofCLI-RSSI-Resources-r16 INTEGER ::= 64 — Maximum number of CLI-RSSI resources for UE

maxNrofCLI-RSSI-Resources-1-r16 INTEGER ::= 63 — Maximum number of CLI-RSSI resources for UE minus 1

maxNrofCLI-SRS-Resources-r16 INTEGER ::= 32 — Maximum number of SRS resources for CLI measurement for UE

maxCLI-Report-r16 INTEGER ::= 8

maxNrofCC-Group-r17 INTEGER ::= 16 — Maximum number of CC groups for DC location report

maxNrofConfiguredGrantConfig-r16 INTEGER ::= 12 — Maximum number of configured grant configurations per BWP

maxNrofConfiguredGrantConfig-1-r16 INTEGER ::= 11 — Maximum number of configured grant configurations per BWP minus 1

maxNrofCG-Type2DeactivationState INTEGER ::= 16 — Maximum number of deactivation state for type 2 configured grants per BWP

maxNrofConfiguredGrantConfigMAC-1-r16 INTEGER ::= 31 — Maximum number of configured grant configurations per MAC entity minus 1

maxNrofSPS-Config-r16 INTEGER ::= 8 — Maximum number of SPS configurations per BWP

maxNrofSPS-Config-1-r16 INTEGER ::= 7 — Maximum number of SPS configurations per BWP minus 1

maxNrofSPS-DeactivationState INTEGER ::= 16 — Maximum number of deactivation state for SPS per BWP

maxNrofPPW-Config-r17 INTEGER ::= 4 — Maximum number of Preconfigured PRS processing windows per DL BWP

maxNrofPPW-ID-1-r17 INTEGER ::= 15 — Maximum number of Preconfigured PRS processing windows minus 1

maxNrOfTxTEGReport-r17 INTEGER ::= 256 — Maximum number of UE Tx Timing Error Group Report

maxNrOfTxTEG-ID-1-r17 INTEGER ::= 7 — Maximum number of UE Tx Timing Error Group ID minus 1

maxNrofDormancyGroups INTEGER ::= 5 —

maxNrofPagingSubgroups-r17 INTEGER ::= 8 — Maximum number of paging subgroups per paging occasion

maxNrofPUCCH-ResourceGroups-1-r16 INTEGER ::= 3 —

maxNrofReqComDC-Location-r17 INTEGER ::= 128 — Maximum number of requested carriers/BWPs combinations for DC location

— report

maxNrofServingCellsTCI-r16 INTEGER ::= 32 — Maximum number of serving cells in simultaneousTCI-UpdateList

maxNrofTxDC-TwoCarrier-r16 INTEGER ::= 64 — Maximum number of UL Tx DC locations reported by the UE for 2CC uplink CA

maxNrofRB-SetGroups-r17 INTEGER ::= 8 — Maximum number of RB set groups

maxNrofRB-Sets-r17 INTEGER ::= 8 — Maximum number of RB sets

maxNrofEnhType3HARQ-ACK-r17 INTEGER ::= 8 — Maximum number of enhanced type 3 HARQ-ACK codebook

maxNrofEnhType3HARQ-ACK-1-r17 INTEGER ::= 7 — Maximum number of enhanced type 3 HARQ-ACK codebook minus 1

maxNrofPRS-ResourcesPerSet-r17 INTEGER ::= 64 — Maximum number of PRS resources for one set

maxNrofPRS-ResourcesPerSet-1-r17 INTEGER ::= 63 — Maximum number of PRS resources for one set minus 1

maxNrofPRS-ResourceOffsetValue-1-r17 INTEGER ::= 511

maxNrofGapId-r17 INTEGER ::= 8 — Maximum number of measurement gap ID is FFS

maxNrofPreConfigPosGapId-r17 INTEGER ::= 16 — Maximum number of preconfigured positioning measurement gap

maxNrOfGapPri-r17 INTEGER ::= 16 — Maximum number of gap priority level

maxCEFReport-r17 INTEGER ::= 4 — Maximum number of CEF reports by the UE

maxNrofMultiplePDSCHs-r17 INTEGER ::= 8 — Maximum number of PDSCHs in PDSCH TDRA list

maxSliceInfo-r17 INTEGER ::= 8 — Maximum number of NSAGs

maxCellSlice-r17 INTEGER ::= 16 — Maximum number of cells supporting the NSAG

maxNrofTRS-ResourceSets-r17 INTEGER ::= 64 — Maximum number of TRS resource sets

maxNrofSearchSpaceGroups-1-r17 INTEGER ::= 2 — Maximum number of search space groups minus 1

maxNrofRemoteUE-r17 INTEGER ::= 32 — Maximum number of connected L2 U2N Remote UEs

maxDCI-4-2-Size-r17 INTEGER ::= 140 — Maximum size of DCI format 4-2

maxFreqMBS-r17 INTEGER ::= 16 — Maximum number of MBS frequencies reported in MBSInterestIndication

maxNrofDRX-ConfigPTM-r17 INTEGER ::= 64 — Max number of DRX configuration for PTM provided in MBS broadcast in a

— cell

maxNrofDRX-ConfigPTM-1-r17 INTEGER ::= 63 — Max number of DRX configuration for PTM provided in MBS broadcast in a

— cell minus 1

maxNrofMBS-ServiceListPerUE-r17 INTEGER ::= 16 — Maximum number of services which the UE can include in the MBS interest

— indication

maxNrofMBS-Session-r17 INTEGER ::= 1024 — Maximum number of MBS sessions provided in MBS broadcast in a cell

maxNrofMTCH-SSB-MappingWindow-r17 INTEGER ::= 16 — Maximum number of MTCH to SSB beam mapping pattern

maxNrofMTCH-SSB-MappingWindow-1-r17 INTEGER ::= 15 — Maximum number of MTCH to SSB beam mapping pattern minus 1

maxNrofMRB-Broadcast-r17 INTEGER ::= 4 — Maximum number of broadcast MRBs configured for one MBS broadcast service

maxNrofPageGroup-r17 INTEGER ::= 32 — Maximum number of paging groups in a paging message

maxNrofPDSCH-ConfigPTM-r17 INTEGER ::= 16 — Maximum number of PDSCH configuration groups for PTM

maxNrofPDSCH-ConfigPTM-1-r17 INTEGER ::= 15 — Maximum number of PDSCH configuration groups for PTM minus 1

maxG-RNTI-r17 INTEGER ::= 16 — Maximum number of G-RNTI that can be configured for a UE.

maxG-RNTI-1-r17 INTEGER ::= 15 — Maximum number of G-RNTI that can be configured for a UE minus 1.

maxG-CS-RNTI-r17 INTEGER ::= 8 — Maximum number of G-CS-RNTI that can be configured for a UE.

maxG-CS-RNTI-1-r17 INTEGER ::= 7 — Maximum number of G-CS-RNTI that can be configured for a UE minus 1.

maxMRB-r17 INTEGER ::= 32 — Maximum number of multicast MRBs (that can be added in MRB-ToAddModLIst)

maxFSAI-MBS-r17 INTEGER ::= 64 — Maximum number of MBS frequency selection area identities

maxNeighCellMBS-r17 INTEGER ::= 8 — Maximum number of MBS broadcast neighbour cells

maxNrofPdcch-BlindDetectionMixed-1-r16 INTEGER ::= 7 — Maximum number of combinations of mixed Rel-16 and Rel-15 PDCCH

— monitoring capabilities minus 1

maxNrofPdcch-BlindDetection-r17 INTEGER ::= 16 — Maximum number of combinations of PDCCH blind detection monitoring

— capabilities

— TAG-MULTIPLICITY-AND-TYPE-CONSTRAINT-DEFINITIONS-STOP

— ASN1STOP

Editor’s note: maxK0-SchedulingOffset and maxK0-SchedulingOffset need confirmation by RAN1.

– End of NR-RRC-Definitions

— ASN1START

END

— ASN1STOP