6.3.4 Other information elements
38.3313GPPNRProtocol specificationRadio Resource Control (RRC)Release 17TS
– AbsoluteTimeInfo
The IE AbsoluteTimeInfo indicates an absolute time in a format YY-MM-DD HH:MM:SS and using BCD encoding. The first/ leftmost bit of the bit string contains the most significant bit of the most significant digit of the year and so on.
AbsoluteTimeInfo information element
— ASN1START
— TAG-ABSOLUTETIMEINFO-START
AbsoluteTimeInfo-r16 ::= BIT STRING (SIZE (48))
— TAG-ABSOLUTETIMEINFO-STOP
— ASN1STOP
– AppLayerMeasConfig
The IE AppLayerMeasConfig indicates configuration of application layer measurements.
AppLayerMeasConfig information element
— ASN1START
— TAG-APPLAYERMEASCONFIG-START
AppLayerMeasConfig-r17 ::= SEQUENCE {
measConfigAppLayerToAddModList-r17 SEQUENCE (SIZE (1..maxNrofAppLayerMeas-r17)) OF MeasConfigAppLayer-r17 OPTIONAL, — Need N
measConfigAppLayerToReleaseList-r17 SEQUENCE (SIZE (1..maxNrofAppLayerMeas-r17)) OF MeasConfigAppLayerId-r17 OPTIONAL, — Need N
rrc-SegAllowed-r17 ENUMERATED {enabled} OPTIONAL, — Need R
…
}
MeasConfigAppLayer-r17 ::= SEQUENCE {
measConfigAppLayerId-r17 MeasConfigAppLayerId-r17,
measConfigAppLayerContainer-r17 OCTET STRING (SIZE (1..8000)) OPTIONAL, — Need N
serviceType-r17 ENUMERATED {streaming, mtsi, vr, spare5, spare4, spare3, spare2, spare1} OPTIONAL, — Need M
pauseReporting-r17 BOOLEAN OPTIONAL, — Need M
transmissionOfSessionStartStop-r17 BOOLEAN OPTIONAL, — Need M
ran-VisibleParameters-r17 SetupRelease {RAN-VisibleParameters-r17} OPTIONAL, — Cond ServiceType
…
}
RAN-VisibleParameters-r17 ::= SEQUENCE {
ran-VisiblePeriodicity-r17 ENUMERATED {ms120, ms240, ms480, ms640, ms1024} OPTIONAL, — Need S
numberOfBufferLevelEntries-r17 INTEGER (1..8) OPTIONAL, — Need R
reportPlayoutDelayForMediaStartup-r17 BOOLEAN OPTIONAL, — Need M
…
}
— TAG-APPLAYERMEASCONFIG-STOP
— ASN1STOP
|
AppLayerMeasConfig field descriptions |
|
measConfigAppLayerContainer The field contains configuration of application layer measurements, see Annex L (normative) in TS 26.247 [68], clause 16.5 in TS 26.114 [69] and TS 26.118 [70]. |
|
pauseReporting The field indicates whether the transmission of measReportAppLayerContainer is paused or not. Value true indicates the transmission of measReportAppLayerContainer is paused; value false indicates the transmission of measReportAppLayerContainer is not paused. |
|
ran-VisibleParameters The field indicates whether RAN visible application layer measurements shall be reported or not. |
|
rrc-SegAllowed This field indicates that RRC segmentation of MeasurementReportAppLayer is allowed. It may be present only if the UE supports RRC segmentation of the MeasurementReportAppLayer message in UL. |
|
serviceType Indicates the type of application layer measurement. Value streaming indicates Quality of Experience Measurement Collection for streaming services (see TS 26.247 [68]), value mtsi indicates Quality of Experience Measurement Collection for MTSI (see TS 26.114 [69]). value vr indicates Quality of Experience Measurement Collection for VR service (see TS 26.118 [70]). The network always configures serviceType when application layer measurements are initially configured and at fullConfig. |
|
transmissionOfSessionStartStop The field indicates whether the UE shall transmit indications when sessions in the application layer start and stop. The UE transmits a session start indication upon configuration of this field if a session already has started in the application layer. |
|
RAN-VisibleParameters field descriptions |
|
numberOfBufferLevelEntries The field contains the maximum number of buffer level entries that can be reported for RAN visible application layer measurements. |
|
ran-VisiblePeriodicity The field indicates the periodicity of RAN visible application layer measurements reporting. Value ms120 indicates 120 ms, value ms240 indicates 240 ms and so on. |
|
reportPlayoutDelayForMediaStartup The field indicates whether the UE shall report Playout Delay for Media Startup for RAN visible application layer measurements. |
|
Conditional Presence |
Explanation |
|
ServiceType |
This field is optionally present, Need M, when serviceType is set to streaming or vr. Otherwise, it is absent. |
– AreaConfiguration
The AreaConfiguration indicates area for which UE is requested to perform measurement logging. If not configured, measurement logging is not restricted to specific cells or tracking areas but applies as long as the RPLMN is contained in plmn-IdentityList stored in VarLogMeasReport.
AreaConfiguration information element
— ASN1START
— TAG-AREACONFIGURATION-START
AreaConfiguration-r16 ::= SEQUENCE {
areaConfig-r16 AreaConfig-r16,
interFreqTargetList-r16 SEQUENCE(SIZE (1..maxFreq)) OF InterFreqTargetInfo-r16 OPTIONAL — Need R
}
AreaConfiguration-v1700 ::= SEQUENCE {
areaConfig-r17 AreaConfig-r16 OPTIONAL, — Need R
interFreqTargetList-r17 SEQUENCE(SIZE (1..maxFreq)) OF InterFreqTargetInfo-r16 OPTIONAL — Need R
}
AreaConfig-r16 ::= CHOICE {
cellGlobalIdList-r16 CellGlobalIdList-r16,
trackingAreaCodeList-r16 TrackingAreaCodeList-r16,
trackingAreaIdentityList-r16 TrackingAreaIdentityList-r16
}
InterFreqTargetInfo-r16 ::= SEQUENCE {
dl-CarrierFreq-r16 ARFCN-ValueNR,
cellList-r16 SEQUENCE (SIZE (1..32)) OF PhysCellId OPTIONAL — Need R
}
CellGlobalIdList-r16 ::= SEQUENCE (SIZE (1..32)) OF CGI-Info-Logging-r16
TrackingAreaCodeList-r16 ::= SEQUENCE (SIZE (1..8)) OF TrackingAreaCode
TrackingAreaIdentityList-r16 ::= SEQUENCE (SIZE (1..8)) OF TrackingAreaIdentity-r16
TrackingAreaIdentity-r16 ::= SEQUENCE {
plmn-Identity-r16 PLMN-Identity,
trackingAreaCode-r16 TrackingAreaCode
}
— TAG-AREACONFIGURATION-STOP
— ASN1STOP
|
AreaConfiguration field descriptions |
|---|
|
InterFreqTargetInfo If configured, it indicates the neighbouring frequency and cells for which UE is requested to perform measurement logging. It can include sync raster or non-sync raster frequencies. |
– BT-NameList
The IE BT-NameList is used to indicate the names of the Bluetooth beacon which the UE is configured to measure.
BT-NameList information element
— ASN1START
— TAG-BTNAMELIST-START
BT-NameList-r16 ::= SEQUENCE (SIZE (1..maxBT-Name-r16)) OF BT-Name-r16
BT-Name-r16 ::= OCTET STRING (SIZE (1..248))
— TAG-BTNAMELIST-STOP
— ASN1STOP
|
BT-NameList field descriptions |
|---|
|
bt-Name If configured, the UE only performs Bluetooth measurements according to the names identified. For each name, it refers to LOCAL NAME defined in Bluetooth specification [51]. |
– DedicatedInfoF1c
The IE DedicatedInfoF1c is used to transfer IAB-DU specific F1-C related information between the network and the IAB node. The carried information consists of F1AP message encapsulated in SCTP/IP or F1-C related (SCTP)/IP packet, see TS 38.472 [64]. The RRC layer is transparent for this information.
DedicatedInfoF1c information element
— ASN1START
— TAG-DEDICATEDINFOF1C-START
DedicatedInfoF1c-r17 ::= OCTET STRING
— TAG-DEDICATEDINFOF1C-STOP
— ASN1STOP
– EUTRA-AllowedMeasBandwidth
The IE EUTRA-AllowedMeasBandwidth is used to indicate the maximum allowed measurement bandwidth on a carrier frequency as defined by the parameter Transmission Bandwidth Configuration "NRB" in TS 36.104 [33]. The values mbw6, mbw15, mbw25, mbw50, mbw75, mbw100 indicate 6, 15, 25, 50, 75 and 100 resource blocks, respectively.
EUTRA-AllowedMeasBandwidth information element
— ASN1START
— TAG-EUTRA-ALLOWEDMEASBANDWIDTH-START
EUTRA-AllowedMeasBandwidth ::= ENUMERATED {mbw6, mbw15, mbw25, mbw50, mbw75, mbw100}
— TAG-EUTRA-ALLOWEDMEASBANDWIDTH-STOP
— ASN1STOP
– EUTRA-MBSFN-SubframeConfigList
The IE EUTRA-MBSFN-SubframeConfigList is used to define an E-UTRA MBSFN subframe pattern (for the purpose of NR rate matching).
EUTRA-MBSFN-SubframeConfigList information element
— ASN1START
— TAG-EUTRA-MBSFN-SUBFRAMECONFIGLIST-START
EUTRA-MBSFN-SubframeConfigList ::= SEQUENCE (SIZE (1..maxMBSFN-Allocations)) OF EUTRA-MBSFN-SubframeConfig
EUTRA-MBSFN-SubframeConfig ::= SEQUENCE {
radioframeAllocationPeriod ENUMERATED {n1, n2, n4, n8, n16, n32},
radioframeAllocationOffset INTEGER (0..7),
subframeAllocation1 CHOICE {
oneFrame BIT STRING (SIZE(6)),
fourFrames BIT STRING (SIZE(24))
},
subframeAllocation2 CHOICE {
oneFrame BIT STRING (SIZE(2)),
fourFrames BIT STRING (SIZE(8))
} OPTIONAL, — Need R
…
}
— TAG-EUTRA-MBSFN-SUBFRAMECONFIGLIST-STOP
— ASN1STOP
|
EUTRA-MBSFN-SubframeConfig field descriptions |
|
radioframeAllocationOffset Field as defined in MBSFN-SubframeConfig in TS 36.331 [10]. |
|
radioframeAllocationPeriod Field as defined in MBSFN-SubframeConfig in TS 36.331 [10], where SFN refers to the SFN of the NR serving cell. |
|
subframeAllocation1 Field as defined in MBSFN-SubframeConfig in TS 36.331 [10], where the UE assumes the duplex mode (FDD or TDD) of the NR cell for which the E-UTRA-MBSFN-SubframeConfig is provided. |
|
subframeAllocation2 Field as defined in MBSFN-SubframeConfig-v1430 in TS 36.331 [10], where the UE assumes the duplex mode (FDD or TDD) of the NR cell for which the E-UTRA-MBSFN-SubframeConfig is provided. |
– EUTRA-MultiBandInfoList
The IE EUTRA-MultiBandInfoList indicates the list of frequency bands in addition to the band represented by CarrierFreq for which cell reselection parameters are common, and a list of additionalPmax and additionalSpectrumEmission.
EUTRA-MultiBandInfoList information element
— ASN1START
— TAG-EUTRA-MULTIBANDINFOLIST-START
EUTRA-MultiBandInfoList ::= SEQUENCE (SIZE (1..maxMultiBands)) OF EUTRA-MultiBandInfo
EUTRA-MultiBandInfo ::= SEQUENCE {
eutra-FreqBandIndicator FreqBandIndicatorEUTRA,
eutra-NS-PmaxList EUTRA-NS-PmaxList OPTIONAL — Need R
}
— TAG-EUTRA-MULTIBANDINFOLIST-STOP
— ASN1STOP
– EUTRA-NS-PmaxList
The IE EUTRA-NS-PmaxList concerns a list of additionalPmax and additionalSpectrumEmission, as defined in TS 36.101 [22], table 6.2.4-1 for UEs neither in CE nor BL UEs and TS 36.101 [22], table 6.2.4E-1 for UEs in CE or BL UEs, for a given frequency band.
EUTRA-NS-PmaxList information element
— ASN1START
— TAG-EUTRA-NS-PMAXLIST-START
EUTRA-NS-PmaxList ::= SEQUENCE (SIZE (1..maxEUTRA-NS-Pmax)) OF EUTRA-NS-PmaxValue
EUTRA-NS-PmaxValue ::= SEQUENCE {
additionalPmax INTEGER (-30..33) OPTIONAL, — Need R
additionalSpectrumEmission INTEGER (1..288) OPTIONAL — Need R
}
— TAG-EUTRA-NS-PMAXLIST-STOP
— ASN1STOP
– EUTRA-PhysCellId
The IE EUTRA-PhysCellId is used to indicate the physical layer identity of the cell, as defined in TS 36.211 [31].
EUTRA-PhysCellId information element
— ASN1START
— TAG-EUTRA-PHYSCELLID-START
EUTRA-PhysCellId ::= INTEGER (0..503)
— TAG-EUTRA-PHYSCELLID-STOP
— ASN1STOP
– EUTRA-PhysCellIdRange
The IE EUTRA-PhysCellIdRange is used to encode either a single or a range of physical cell identities. The range is encoded by using a start value and by indicating the number of consecutive physical cell identities (including start) in the range. For fields comprising multiple occurrences of EUTRA-PhysCellIdRange, NW may configure overlapping ranges of physical cell identities.
EUTRA-PhysCellIdRange information element
— ASN1START
— TAG-EUTRA-PHYSCELLIDRANGE-START
EUTRA-PhysCellIdRange ::= SEQUENCE {
start EUTRA-PhysCellId,
range ENUMERATED {n4, n8, n12, n16, n24, n32, n48, n64, n84, n96,
n128, n168, n252, n504, spare2, spare1} OPTIONAL — Need N
}
— TAG-EUTRA-PHYSCELLIDRANGE-STOP
— ASN1STOP
– EUTRA-PresenceAntennaPort1
The IE EUTRA-PresenceAntennaPort1 is used to indicate whether all the neighbouring cells use Antenna Port 1. When set to true, the UE may assume that at least two cell-specific antenna ports are used in all neighbouring cells.
EUTRA-PresenceAntennaPort1 information element
— ASN1START
— TAG-EUTRA-PRESENCEANTENNAPORT1-START
EUTRA-PresenceAntennaPort1 ::= BOOLEAN
— TAG-EUTRA-PRESENCEANTENNAPORT1-STOP
— ASN1STOP
– EUTRA-Q-OffsetRange
The IE EUTRA-Q-OffsetRange is used to indicate a cell, or frequency specific offset to be applied when evaluating triggering conditions for measurement reporting. The value in dB. Value dB-24 corresponds to -24 dB, value dB-22 corresponds to -22 dB and so on.
EUTRA-Q-OffsetRange information element
— ASN1START
— TAG-EUTRA-Q-OFFSETRANGE-START
EUTRA-Q-OffsetRange ::= ENUMERATED {
dB-24, dB-22, dB-20, dB-18, dB-16, dB-14,
dB-12, dB-10, dB-8, dB-6, dB-5, dB-4, dB-3,
dB-2, dB-1, dB0, dB1, dB2, dB3, dB4, dB5,
dB6, dB8, dB10, dB12, dB14, dB16, dB18,
dB20, dB22, dB24}
— TAG-EUTRA-Q-OFFSETRANGE-STOP
— ASN1STOP
– IAB-IP-Address
The IE IAB-IP-Address is used to indicate the IP address/prefix.
IAB-IP-Address information element
— ASN1START
— TAG-IABIPADDRESS-START
IAB-IP-Address-r16 ::= CHOICE {
iPv4-Address-r16 BIT STRING (SIZE(32)),
iPv6-Address-r16 BIT STRING (SIZE(128)),
iPv6-Prefix-r16 BIT STRING (SIZE(64)),
…
}
— TAG-IABIPADDRESS-STOP
— ASN1STOP
|
IAB-IP-Address field descriptions |
|
iPv4-Address This field is used to provide the allocated IPv4 address. |
|
iPv6-Address This field is used to provide the allocated IPv6 address. |
|
iPv6-Prefix This field is used to provide the allocated IPv6 prefix. |
– IAB-IP-AddressIndex
The IE IAB-IP-AddressIndex is used to identify a configuration of an IP address.
IAB-IP-AddressIndex information element
— ASN1START
— TAG-IABIPADDRESSINDEX-START
IAB-IP-AddressIndex-r16 ::= INTEGER (1..maxIAB-IP-Address-r16)
— TAG-IABIPADDRESSINDEX-STOP
— ASN1STOP
– IAB-IP-Usage
The IE IAB-IP-Usage is used to indicate the usage of the assigned IP address/prefix.
IAB-IP-Usage information element
— ASN1START
— TAG-IAB-IP-USAGE-START
IAB-IP-Usage-r16 ::= ENUMERATED {f1-C, f1-U, non-F1, spare}
— TAG-IAB-IP-USAGE-STOP
— ASN1STOP
– LoggingDuration
The LoggingDuration indicates the duration for which UE is requested to perform measurement logging. Value min10 corresponds to 10 minutes, value min20 corresponds to 20 minutes and so on.
LoggingDuration information element
— ASN1START
— TAG-LOGGINGDURATION-START
LoggingDuration-r16 ::= ENUMERATED {
min10, min20, min40, min60, min90, min120, spare2, spare1}
— TAG-LOGGINGDURATION-STOP
— ASN1STOP
– LoggingInterval
The LoggingInterval indicates the periodicity for logging measurement results. Value ms1280 corresponds to 1.28s, value ms2560 corresponds to 2.56s and so on. Value infinity means it is equal to the configured value of the LoggingDuration IE.
LoggingInterval information element
— ASN1START
— TAG-LOGGINGINTERVAL-START
LoggingInterval-r16 ::= ENUMERATED {
ms320, ms640, ms1280, ms2560, ms5120, ms10240, ms20480,
ms30720, ms40960, ms61440 , infinity}
— TAG-LOGGINGINTERVAL-STOP
— ASN1STOP
– LogMeasResultListBT
The IE LogMeasResultListBT covers measured results for Bluetooth.
LogMeasResultListBT information element
— ASN1START
— TAG-LOGMEASRESULTLISTBT-START
LogMeasResultListBT-r16 ::= SEQUENCE (SIZE (1..maxBT-IdReport-r16)) OF LogMeasResultBT-r16
LogMeasResultBT-r16 ::= SEQUENCE {
bt-Addr-r16 BIT STRING (SIZE (48)),
rssi-BT-r16 INTEGER (-128..127) OPTIONAL,
…
}
— TAG-LOGMEASRESULTLISTBT-STOP
— ASN1STOP
|
LogMeasResultListBT field descriptions |
|---|
|
bt-Addr This field indicates the Bluetooth public address of the Bluetooth beacon as defined in TS 37.355 [49]. |
|
rssi-BT This field provides the beacon received signal strength indicator (RSSI) in dBm as defined in TS 37.355 [49]. |
– LogMeasResultListWLAN
The IE LogMeasResultListWLAN covers measured results for WLAN.
LogMeasResultListWLAN information element
— ASN1START
— TAG-LOGMEASRESULTLISTWLAN-START
LogMeasResultListWLAN-r16 ::= SEQUENCE (SIZE (1..maxWLAN-Id-Report-r16)) OF LogMeasResultWLAN-r16
LogMeasResultWLAN-r16 ::= SEQUENCE {
wlan-Identifiers-r16 WLAN-Identifiers-r16,
rssiWLAN-r16 WLAN-RSSI-Range-r16 OPTIONAL,
rtt-WLAN-r16 WLAN-RTT-r16 OPTIONAL,
…
}
WLAN-Identifiers-r16 ::= SEQUENCE {
ssid-r16 OCTET STRING (SIZE (1..32)) OPTIONAL,
bssid-r16 OCTET STRING (SIZE (6)) OPTIONAL,
hessid-r16 OCTET STRING (SIZE (6)) OPTIONAL,
…
}
WLAN-RSSI-Range-r16 ::= INTEGER(0..141)
WLAN-RTT-r16 ::= SEQUENCE {
rttValue-r16 INTEGER (0..16777215),
rttUnits-r16 ENUMERATED {
microseconds,
hundredsofnanoseconds,
tensofnanoseconds,
nanoseconds,
tenthsofnanoseconds,
…},
rttAccuracy-r16 INTEGER (0..255) OPTIONAL,
…
}
— TAG-LOGMEASRESULTLISTWLAN-STOP
— ASN1STOP
|
LogMeasResultListWLAN field descriptions |
|---|
|
Bssid Basic Service Set Identifier (BSSID) defined in IEEE 802.11-2012 [50]. |
|
Hessid Homogenous Extended Service Set Identifier (HESSID) defined in IEEE 802.11-2012 [50]. |
|
rssiWLAN Measured WLAN RSSI result in dBm. The IE WLAN-RSSI-Range specifies the value range used in WLAN RSSI measurements and thresholds. Integer value for WLAN RSSI measurements is according to mapping table in TS 36.133 [40]. Value 0 corresponds to –infinity, value 1 to -100dBm, value 2 to -99dBm, and so on (i.e. in steps of 1dBm) until value 140, which corresponds to 39dBm, while value 141 corresponds to +infinity. |
|
rtt-WLAN This field provides the measured roundtrip time between the target device and WLAN AP and optionally the accuracy expressed as the standard deviation of the delay. Units for each of these are 1000ns, 100ns, 10ns, 1ns, and 0.1ns as defined in TS 37.355 [49]. |
|
rttValue This field specifies the Round Trip Time (RTT) measurement between the target device and WLAN AP in units given by the field rttUnits as defined in TS 37.355 [49]. |
|
rttUnits This field specifies the Units for the fields rttValue and rttAccuracy. The available Units are 1000ns, 100ns, 10ns, 1ns, and 0.1ns as defined in TS 37.355 [49]. |
|
rttAccuracy This field provides the estimated accuracy of the provided rttValue expressed as the standard deviation in units given by the field rttUnits as defined in TS 37.355 [49]. |
|
Ssid Service Set Identifier (SSID) defined in IEEE 802.11-2012 [50]. |
|
Wlan-Identifiers Indicates the WLAN parameters used for identification of the WLAN for which the measurement results are applicable. |
– MeasConfigAppLayerId
The IE MeasConfigAppLayerId identifies the application layer measurement.
MeasConfigAppLayerId information element
— ASN1START
— TAG-MEASCONFIGAPPLAYERID-START
MeasConfigAppLayerId-r17 ::= INTEGER (0..maxNrofAppLayerMeas-1-r17)
— TAG-MEASCONFIGAPPLAYERID-STOP
— ASN1STOP
– OtherConfig
The IE OtherConfig contains configuration related to miscellaneous other configurations.
OtherConfig information element
— ASN1START
— TAG-OTHERCONFIG-START
OtherConfig ::= SEQUENCE {
delayBudgetReportingConfig CHOICE{
release NULL,
setup SEQUENCE{
delayBudgetReportingProhibitTimer ENUMERATED {s0, s0dot4, s0dot8, s1dot6, s3, s6, s12, s30}
}
} OPTIONAL — Need M
}
OtherConfig-v1540 ::= SEQUENCE {
overheatingAssistanceConfig SetupRelease {OverheatingAssistanceConfig} OPTIONAL, — Need M
…
}
CandidateServingFreqListNR-r16 ::= SEQUENCE (SIZE (1..maxFreqIDC-r16)) OF ARFCN-ValueNR
OtherConfig-v1610 ::= SEQUENCE {
idc-AssistanceConfig-r16 SetupRelease {IDC-AssistanceConfig-r16} OPTIONAL, — Need M
drx-PreferenceConfig-r16 SetupRelease {DRX-PreferenceConfig-r16} OPTIONAL, — Need M
maxBW-PreferenceConfig-r16 SetupRelease {MaxBW-PreferenceConfig-r16} OPTIONAL, — Need M
maxCC-PreferenceConfig-r16 SetupRelease {MaxCC-PreferenceConfig-r16} OPTIONAL, — Need M
maxMIMO-LayerPreferenceConfig-r16 SetupRelease {MaxMIMO-LayerPreferenceConfig-r16} OPTIONAL, — Need M
minSchedulingOffsetPreferenceConfig-r16 SetupRelease {MinSchedulingOffsetPreferenceConfig-r16} OPTIONAL, — Need M
releasePreferenceConfig-r16 SetupRelease {ReleasePreferenceConfig-r16} OPTIONAL, — Need M
referenceTimePreferenceReporting-r16 ENUMERATED {true} OPTIONAL, — Need R
btNameList-r16 SetupRelease {BT-NameList-r16} OPTIONAL, — Need M
wlanNameList-r16 SetupRelease {WLAN-NameList-r16} OPTIONAL, — Need M
sensorNameList-r16 SetupRelease {Sensor-NameList-r16} OPTIONAL, — Need M
obtainCommonLocation-r16 ENUMERATED {true} OPTIONAL, — Need R
sl-AssistanceConfigNR-r16 ENUMERATED{true} OPTIONAL — Need R
}
OtherConfig-v1700 ::= SEQUENCE {
ul-GapFR2-PreferenceConfig-r17 ENUMERATED {true} OPTIONAL, — Need R
musim-GapAssistanceConfig-r17 SetupRelease {MUSIM-GapAssistanceConfig-r17} OPTIONAL, — Need M
musim-LeaveAssistanceConfig-r17 SetupRelease {MUSIM-LeaveAssistanceConfig-r17} OPTIONAL, — Need M
successHO-Config-r17 SetupRelease {SuccessHO-Config-r17} OPTIONAL, — Need M
maxBW-PreferenceConfigFR2-2-r17 ENUMERATED {true} OPTIONAL, — Cond maxBW
maxMIMO-LayerPreferenceConfigFR2-2-r17 ENUMERATED {true} OPTIONAL, — Cond maxMIMO
minSchedulingOffsetPreferenceConfigExt-r17 ENUMERATED {true} OPTIONAL, — Cond minOffset
rlm-RelaxationReportingConfig-r17 SetupRelease {RLM-RelaxationReportingConfig-r17} OPTIONAL, — Need M
bfd-RelaxationReportingConfig-r17 SetupRelease {BFD-RelaxationReportingConfig-r17} OPTIONAL, — Need M
scg-DeactivationPreferenceConfig-r17 SetupRelease {SCG-DeactivationPreferenceConfig-r17} OPTIONAL, — Cond SCG
rrm-MeasRelaxationReportingConfig-r17 SetupRelease {RRM-MeasRelaxationReportingConfig-r17} OPTIONAL, — Need M
propDelayDiffReportConfig-r17 SetupRelease {PropDelayDiffReportConfig-r17} OPTIONAL — Need M
}
MUSIM-GapAssistanceConfig-r17 ::= SEQUENCE {
musim-GapProhibitTimer-r17 ENUMERATED {s0, s0dot1, s0dot2, s0dot3, s0dot4, s0dot5, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10}
}
MUSIM-LeaveAssistanceConfig-r17 ::= SEQUENCE {
musim-LeaveWithoutResponseTimer-r17 ENUMERATED {ms10, ms20, ms40, ms60, ms80, ms100, spare2, spare1}
}
SuccessHO-Config-r17 ::= SEQUENCE {
thresholdPercentageT304-r17 ENUMERATED {p40, p60, p80, spare5, spare4, spare3, spare2, spare1} OPTIONAL, –Need R
thresholdPercentageT310-r17 ENUMERATED {p40, p60, p80, spare5, spare4, spare3, spare2, spare1} OPTIONAL, –Need R
thresholdPercentageT312-r17 ENUMERATED {p20, p40, p60, p80, spare4, spare3, spare2, spare1} OPTIONAL, –Need R
sourceDAPS-FailureReporting-r17 ENUMERATED {true} OPTIONAL, –Need R
…
}
OverheatingAssistanceConfig ::= SEQUENCE {
overheatingIndicationProhibitTimer ENUMERATED {s0, s0dot5, s1, s2, s5, s10, s20, s30,
s60, s90, s120, s300, s600, spare3, spare2, spare1}
}
IDC-AssistanceConfig-r16 ::= SEQUENCE {
candidateServingFreqListNR-r16 CandidateServingFreqListNR-r16 OPTIONAL, — Need R
…
}
DRX-PreferenceConfig-r16 ::= SEQUENCE {
drx-PreferenceProhibitTimer-r16 ENUMERATED {
s0, s0dot5, s1, s2, s3, s4, s5, s6, s7,
s8, s9, s10, s20, s30, spare2, spare1}
}
MaxBW-PreferenceConfig-r16 ::= SEQUENCE {
maxBW-PreferenceProhibitTimer-r16 ENUMERATED {
s0, s0dot5, s1, s2, s3, s4, s5, s6, s7,
s8, s9, s10, s20, s30, spare2, spare1}
}
MaxCC-PreferenceConfig-r16 ::= SEQUENCE {
maxCC-PreferenceProhibitTimer-r16 ENUMERATED {
s0, s0dot5, s1, s2, s3, s4, s5, s6, s7,
s8, s9, s10, s20, s30, spare2, spare1}
}
MaxMIMO-LayerPreferenceConfig-r16 ::= SEQUENCE {
maxMIMO-LayerPreferenceProhibitTimer-r16 ENUMERATED {
s0, s0dot5, s1, s2, s3, s4, s5, s6, s7,
s8, s9, s10, s20, s30, spare2, spare1}
}
MinSchedulingOffsetPreferenceConfig-r16 ::= SEQUENCE {
minSchedulingOffsetPreferenceProhibitTimer-r16 ENUMERATED {
s0, s0dot5, s1, s2, s3, s4, s5, s6, s7,
s8, s9, s10, s20, s30, spare2, spare1}
}
ReleasePreferenceConfig-r16 ::= SEQUENCE {
releasePreferenceProhibitTimer-r16 ENUMERATED {
s0, s0dot5, s1, s2, s3, s4, s5, s6, s7,
s8, s9, s10, s20, s30, infinity, spare1},
connectedReporting ENUMERATED {true} OPTIONAL — Need R
}
RLM-RelaxationReportingConfig-r17 ::= SEQUENCE {
rlm-RelaxtionReportingProhibitTimer ENUMERATED {s0, s0dot5, s1, s2, s5, s10, s20, s30,
s60, s90, s120, s300, s600, infinity, spare2, spare1}
}
BFD-RelaxationReportingConfig-r17 ::= SEQUENCE {
bfd-RelaxtionReportingProhibitTimer ENUMERATED {s0, s0dot5, s1, s2, s5, s10, s20, s30,
s60, s90, s120, s300, s600, infinity, spare2, spare1}
}
SCG-DeactivationPreferenceConfig-r17 ::= SEQUENCE {
scg-DeactivationPreferenceProhibitTimer-r17 ENUMERATED {
s0, s1, s2, s4, s8, s10, s15, s30,
s60, s120, s180, s240, s300, s600, s900, s1800}
}
RRM-MeasRelaxationReportingConfig-r17 ::= SEQUENCE {
s-SearchDeltaP-Stationary-r17 ENUMERATED {dB2, dB3, dB6, dB9, dB12, dB15, spare2, spare1},
t-SearchDeltaP-Stationary-r17 ENUMERATED {s5, s10, s20, s30, s60, s120, s180, s240, s300, spare7, spare6, spare5,
spare4, spare3, spare2, spare1}
}
PropDelayDiffReportConfig-r17 ::= SEQUENCE {
threshPropDelayDiff-r17 ENUMERATED {ms0dot5, ms1, ms2, ms3, ms4, ms5, ms6 ,ms7, ms8, ms9, ms10, spare5,
spare4, spare3, spare2, spare1} OPTIONAL, — Need M
neighCellInfoList-r17 SEQUENCE (SIZE (1..maxCellNTN-r17)) OF NeighbourCellInfo-r17 OPTIONAL — Need M
}
NeighbourCellInfo-r17 ::= SEQUENCE {
epochTime-r17 EpochTime-r17,
ephemerisInfo-r17 EphemerisInfo-r17
}
— TAG-OTHERCONFIG-STOP
— ASN1STOP
|
OtherConfig field descriptions |
|---|
|
bfd-RelaxationReportingConfig Configuration for the UE to report the relaxation state of BFD measurements. |
|
candidateServingFreqListNR Indicates for each candidate NR serving cells, the center frequency around which UE is requested to report IDC issues. |
|
connectedReporting Indicates that the UE can report a preference to remain in RRC_CONNECTED state following a report to leave RRC_CONNECTED state. If absent, the UE cannot report a preference to stay in RRC_CONNECTED state. |
|
delayBudgetReportingProhibitTimer Prohibit timer for delay budget reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot4 means prohibit timer is set to 0.4 seconds, and so on. |
|
drx-PreferenceConfig Configuration for the UE to report assistance information to inform the gNB about the UE’s DRX preferences for power saving. |
|
drx-PreferenceProhibitTimer Prohibit timer for DRX preferences assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on. |
|
idc-AssistanceConfig Configuration for the UE to report assistance information to inform the gNB about UE detected IDC problem. |
|
maxBW-PreferenceConfig Configuration for the UE to report assistance information to inform the gNB about the UE’s preferred bandwidth for power saving. |
|
maxBW-PreferenceProhibitTimer Prohibit timer for preferred bandwidth assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on. |
|
maxCC-PreferenceConfig Configuration for the UE to report assistance information to inform the gNB about the UE’s preferred number of carriers for power saving. |
|
maxBW-PreferenceConfigFR2-2 Configuration for the UE to report assistance information to inform the gNB about the UE’s preferred bandwidth for power saving for FR2-2. |
|
maxCC-PreferenceProhibitTimer Prohibit timer for preferred number of carriers assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on. |
|
maxMIMO-LayerPreferenceConfig Configuration for the UE to report assistance information to inform the gNB about the UE’s preferred number of MIMO layers for power saving. |
|
maxMIMO-LayerPreferenceConfigFR2-2 Configuration for the UE to report assistance information to inform the gNB about the UE’s preferred number of MIMO layers for power saving for FR2-2. |
|
maxMIMO-LayerPreferenceProhibitTimer Prohibit timer for preferred number of number of MIMO layers assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on. |
|
minSchedulingOffsetPreferenceConfig Configuration for the UE to report assistance information to inform the gNB about the UE’s preferred minimumSchedulingOffset value for cross-slot scheduling for power saving. |
|
minSchedulingOffsetPreferenceConfigExt Configuration for the UE to report assistance information to inform the gNB about the UE’s preferred minimumSchedulingOffset value for cross-slot scheduling for power saving for SCS 480 kHz and/or 960 kHz. |
|
minSchedulingOffsetPreferenceProhibitTimer Prohibit timer for preferred minimumSchedulingOffset assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on. |
|
musim-GapAssistanceConfig Configuration for the UE to report assistance information for gap preference. |
|
musim-GapProhibitTimer Prohibit timer for MUSIM assistance information reporting for gap preference. |
|
musim-LeaveAssistanceConfig Configuration for the UE to report assistance information for leaving RRC_CONNECTED for MUSIM purpose. |
|
musim-LeaveWithoutResponseTimer Indicates the timer for the UE to enter RRC_IDLE for MUSIM purpose as defined in clause 5.3.8.6. |
|
obtainCommonLocation Requests the UE to attempt to have detailed location information available using GNSS. NR configures the field if includeCommonLocationInfo is configured for one or more measurements. |
|
overheatingAssistanceConfig Configuration for the UE to report assistance information to inform the gNB about UE detected internal overheating. |
|
overheatingIndicationProhibitTimer Prohibit timer for overheating assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on. |
|
propDelayDiffReportConfig Configuration for the UE to report service link propagation delay difference between serving cell and neighbour cell(s). |
|
referenceTimePreferenceReporting If present, the field indicates the UE is configured to provide reference time assistance information. |
|
releasePreferenceConfig Configuration for the UE to report assistance information to inform the gNB about the UE’s preference to leave RRC_CONNECTED state. |
|
rlm-RelaxationReportingConfig Configuration for the UE to report the relaxation state of RLM measurements. |
|
releasePreferenceProhibitTimer Prohibit timer for release preference assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 seconds, value s1 means prohibit timer is set to 1 second and so on. Value infinity means that once a UE has reported a release preference, the UE cannot report a release preference again during the RRC connection. |
|
s-SearchDeltaP-Stationary Parameter "SSearchDeltaP-StationaryConnected" in 5.7.4.4. Value dB2 corresponds to 2 dB, dB3 corresponds to 3 dB and so on. |
|
scg-DeactivationPreferenceConfig Configuration of the UE to indicate its preference for SCG deactivation. |
|
scg -StatePreferenceProhibitTimer Prohibit timer for UE indication of its preference for SCG deactivation. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s1 means prohibit timer is set to 1 second and so on. |
|
sensorNameList Configuration for the UE to report measurements from specific sensors. |
|
sl-AssistanceConfigNR Indicate whether UE is configured to provide configured grant assistance information for NR sidelink communication. |
|
sourceDAPS-FailureReporting This field indicates whether the UE shall generate the SHR upon successfully completing the DAPS handover to the target cell and if a radio link failure was experienced in the source PCell while executing the DAPS handover. This field is set in the otherConfig configured by the source cell of the DAPS handover. |
|
successHO-Config Configuration for the UE to report the successful handover information to the network. |
|
t-SearchDeltaP-Stationary Parameter "TSearchDeltaP-StationaryConnected" in 5.7.4.4. Value in seconds. Value s5 means 5 seconds, value s10 means 10 seconds and so on. |
|
thresholdPercentageT304 This field indicates the threshold for the ratio in percentage between the elapsed T304 timer and the configured value of the T304 timer. Value p40 corresponds to 40%, value p60 corresponds to 60% and so on. This field is set in the otherConfig configured by the target cell of the handover. |
|
thresholdPercentageT310 This field indicates the threshold for the ratio in percentage between the elapsed T310 timer and the configured value of the T310 timer. Value p40 corresponds to 40%, value p60 corresponds to 60% and so on. This field is set in the otherConfig configured by the source cell of the handover. |
|
thresholdPercentageT312 This field indicates the threshold for the ratio in percentage between the elapsed T312 timer and the configured value(s) of the T312 timer. Value p20 corresponds to 20%, value p40 corresponds to 40% and so on. This field is set in the otherConfig configured by the source cell of the handover. |
|
threshPropDelayDiff Threshold for service link propagation delay difference report as specified in 5.7.4.2. |
|
ul-GapFR2-PreferenceConfig Indicates whether UE is configured to request for FR2 UL gap activation/deactivation and preferred FR2 UL gap pattern. |
|
Conditional Presence |
Explanation |
|
maxBW |
This field is optionally present, need R, if maxBW-PreferenceConfig-r16 is setup; otherwise it is absent, need R. |
|
maxMIMO |
This field is optionally present, need R, if maxMIMO-LayerPreferenceConfig-r16 is setup; otherwise it is absent, need R. |
|
minOffset |
This field is optionally present, need R, if minSchedulingOffsetPreferenceConfig-r16 is setup; otherwise it is absent, need R. |
|
SCG |
This field is optionally present, need M, in an RRCReconfiguration message not within mrdc-SecondaryCellGroup and received, either via SRB3 within DLInformationTransferMRDC or via SRB1. Otherwise, it is absent. |
– PhysCellIdUTRA-FDD
The IE PhysCellIdUTRA-FDD is used to indicate the physical layer identity of the cell, i.e. the primary scrambling code, as defined in TS 25.331 [45].
PhysCellIdUTRA-FDD information element
— ASN1START
— TAG-PHYSCELLIDUTRA-FDD-START
PhysCellIdUTRA-FDD-r16 ::= INTEGER (0..511)
— TAG-PHYSCELLIDUTRA-FDD-STOP
— ASN1STOP
– RRC-TransactionIdentifier
The IE RRC-TransactionIdentifier is used, together with the message type, for the identification of an RRC procedure (transaction).
RRC-TransactionIdentifier information element
— ASN1START
— TAG-RRC-TRANSACTIONIDENTIFIER-START
RRC-TransactionIdentifier ::= INTEGER (0..3)
— TAG-RRC-TRANSACTIONIDENTIFIER-STOP
— ASN1STOP
– Sensor-NameList
The IE Sensor-NameList is used to indicate the names of the sensors which the UE is configured to measure.
Sensor-NameList information element
— ASN1START
— TAG-SENSORNAMELIST-START
Sensor-NameList-r16 ::= SEQUENCE {
measUncomBarPre-r16 ENUMERATED {true} OPTIONAL, — Need R
measUeSpeed ENUMERATED {true} OPTIONAL, — Need R
measUeOrientation ENUMERATED {true} OPTIONAL — Need R
}
— TAG-SENSORNAMELIST-STOP
— ASN1STOP
|
Sensor-NameList field descriptions |
|
measUncomBarPre If configured, the UE reports the uncompensated Barometeric pressure measurement as defined in TS 37.355 [49]. |
|
measUeSpeed If configured, the UE reports the UE speed measurement as defined in TS 37.355 [49]. |
|
measUeOrientation If configured, the UE reports the UE orientation information as defined in TS 37.355 [49]. |
– TraceReference
The TraceReference contains parameter Trace Reference as defined in TS 32.422 [52].
TraceReference information element
— ASN1START
— TAG-TRACEREFERENCE-START
TraceReference-r16 ::= SEQUENCE {
plmn-Identity-r16 PLMN-Identity,
traceId-r16 OCTET STRING (SIZE (3))
}
— TAG-TRACEREFERENCE-STOP
— ASN1STOP
– UE-MeasurementsAvailable
The IE UE-MeasurementsAvailable is used to indicate all relevant available indicators for UE measurements.
UE-MeasurementsAvailable information element
— ASN1START
— TAG-UE-MeasurementsAvailable-START
UE-MeasurementsAvailable-r16 ::= SEQUENCE {
logMeasAvailable-r16 ENUMERATED {true} OPTIONAL,
logMeasAvailableBT-r16 ENUMERATED {true} OPTIONAL,
logMeasAvailableWLAN-r16 ENUMERATED {true} OPTIONAL,
connEstFailInfoAvailable-r16 ENUMERATED {true} OPTIONAL,
rlf-InfoAvailable-r16 ENUMERATED {true} OPTIONAL,
…,
[[
successHO-InfoAvailable-r17 ENUMERATED {true} OPTIONAL,
sigLogMeasConfigAvailable-r17 BOOLEAN OPTIONAL
]]
}
— TAG-UE-MeasurementsAvailable-STOP
— ASN1STOP
– UTRA-FDD-Q-OffsetRange
The IE UTRA-FDD-Q-OffsetRange is used to indicate a frequency specific offset to be applied when evaluating triggering conditions for measurement reporting. The value is in dB. Value dB-24 corresponds to -24 dB, value dB-22 corresponds to -22 dB and so on.
UTRA-FDD-Q-OffsetRange information element
— ASN1START
— TAG-UTRA-FDD-Q-OFFSETRANGE-START
UTRA-FDD-Q-OffsetRange-r16 ::= ENUMERATED {
dB-24, dB-22, dB-20, dB-18, dB-16, dB-14,
dB-12, dB-10, dB-8, dB-6, dB-5, dB-4, dB-3,
dB-2, dB-1, dB0, dB1, dB2, dB3, dB4, dB5,
dB6, dB8, dB10, dB12, dB14, dB16, dB18,
dB20, dB22, dB24}
— TAG-UTRA-FDD-Q-OFFSETRANGE-STOP
— ASN1STOP
– VisitedCellInfoList
The IE VisitedCellInfoList includes the mobility history information of maximum of 16 most recently visited primary cells or time spent in any cell selection state and/or camped on any cell state in NR or E-UTRA and, in case of Dual Connectivity, the mobility history information of maxPSCellHistory most recently visited primary secondary cell group cells across all the primary cells included in the VisitedCellInfoList. The most recently visited cell is stored first in the list. The list includes cells visited in RRC_IDLE, RRC_INACTIVE and RRC_CONNECTED states for NR and RRC_IDLE and RRC_CONNECTED for E-UTRA.
VisitedCellInfoList information element
— ASN1START
— TAG-VISITEDCELLINFOLIST-START
VisitedCellInfoList-r16 ::= SEQUENCE (SIZE (1..maxCellHistory-r16)) OF VisitedCellInfo-r16
VisitedCellInfo-r16 ::= SEQUENCE {
visitedCellId-r16 CHOICE {
nr-CellId-r16 CHOICE {
cgi-Info CGI-Info-Logging-r16,
pci-arfcn-r16 PCI-ARFCN-NR-r16
},
eutra-CellId-r16 CHOICE {
cellGlobalId-r16 CGI-InfoEUTRA,
pci-arfcn-r16 PCI-ARFCN-EUTRA-r16
}
} OPTIONAL,
timeSpent-r16 INTEGER (0..4095),
…,
[[
visitedPSCellInfoListReport-r17 VisitedPSCellInfoList-r17 OPTIONAL
]]
}
VisitedPSCellInfoList-r17 ::= SEQUENCE (SIZE (1..maxPSCellHistory-r17)) OF VisitedPSCellInfo-r17
VisitedPSCellInfo-r17 ::= SEQUENCE {
visitedCellId-r17 CHOICE {
nr-CellId-r17 CHOICE {
cgi-Info-r17 CGI-Info-Logging-r16,
pci-arfcn-r17 PCI-ARFCN-NR-r16
},
eutra-CellId-r17 CHOICE {
cellGlobalId-r17 CGI-InfoEUTRALogging,
pci-arfcn-r17 PCI-ARFCN-EUTRA-r16
}
} OPTIONAL,
timeSpent-r17 INTEGER (0..4095),
…
}
— TAG-VISITEDCELLINFOLIST-STOP
— ASN1STOP
|
VisitedCellInfoList field descriptions |
|---|
|
timeSpent This field indicates the duration of stay in the cell or in any cell selection state and/or camped on any cell state in NR or E-UTRA approximated to the closest second. If included in VisitedPSCellInfo, it indicates the duration of stay in the PSCell or without any PSCell. If the duration of stay exceeds 4095s, the UE shall set it to 4095s. |
|
visitedCellId This field indicates the visited cell id including NR and E-UTRA cells. |
– WLAN-NameList
The IE WLAN-NameList is used to indicate the names of the WLAN AP for which the UE is configured to measure.
WLAN-NameList information element
— ASN1START
— TAG-WLANNAMELIST-START
WLAN-NameList-r16 ::= SEQUENCE (SIZE (1..maxWLAN-Name-r16)) OF WLAN-Name-r16
WLAN-Name-r16 ::= OCTET STRING (SIZE (1..32))
— ASN1STOP
— TAG-WLANNAMELIST-STOP
|
WLAN-NameList field descriptions |
|---|
|
WLAN-Name If configured, the UE only performs WLAN measurements according to the names identified. For each name, it refers to Service Set Identifier (SSID) defined in IEEE 802.11-2012 [50]. |