7.5B Adjacent channel selectivity for DC in FR1
38.101-33GPPNRPart 3: Range 1 and Range 2 Interworking operation with other radiosRelease 17TSUser Equipment (UE) radio transmission and reception
7.5B.1 Intra-band contiguous EN-DC in FR1
Intra-band contiguous EN-DC ACS requirement and parameters are defined for test case 1 in Table 7.5B.1-1 and for test case 2 in Table 7.5B.1-2.
Table 7.5B.1-1: ACS test case 1
EN-DC Aggregated Bandwidth, MHz |
<=100 |
>100, <=120 |
>120, <=140 |
>140, <=160 |
ACS, dB |
X1 |
19.2 |
18.5 |
17.9 |
Pinterferer, dBm |
PI 2 |
Aggregated power + 17.7 dB |
Aggregated power + 17 dB |
Aggregated power + 16.4dB |
Pw in Transmission BW configuration, per CC, dBm |
REFSENS +14dB |
|||
NOTE 1: X is ACS level at the specified EN-DC aggregated bandwidth from Table 7.5.1A-1 in TS 36.101 [4] NOTE 2: PI is from Table 7.5.1A-2 in TS 36.101 [4] NOTE 3: Jammer BW and offset is from Table 7.5.1A-2 [4] and is applied from the lowest edge of the lowest carrier and the highest edge of the highest carrier NOTE 4: Void. NOTE 5: Void. |
Table 7.5B.1-2: ACS test case 2
EN-DC Aggregated Bandwidth, ENBW, MHz |
≤100 |
>100, ≤120 |
>120, ≤140 |
>140, ≤160 |
Pw in Transmission Bandwidth Configuration, perCC, dBm |
PW 1 |
-42.7 +10log10(NRB,c/ NRB_agg) |
-42 +10log10(NRB,c/ NRB_agg) |
-41.4 +10log10(NRB,c/ NRB_agg) |
Pinterferer, dBm |
-25 |
|||
NOTE 1: PW is wanted signal power level at the specified EN-DC aggregated Bandwidth from Table 7.5.1A-3 in TS 36.101 [4] NOTE 2: Jammer BW and offset is from Table 7.5.1A-3 [4] and is applied from the lowest edge of the lowest carrier and the highest edge of the highest carrier NOTE 3: Void. NOTE 4: Void. |
7.5B.2 Intra-band non-contiguous EN-DC in FR1
For the E-UTRA sub-block containing one or multiple CC’s, the requirement is defned in clause 7.5.1 for single carrier operation and in clause 7.5.1A for CA in TS 36.101 [4].
For the NR sub-block, the requirement is defined in clause 7.5 in TS 38.101-1 [2].
The blocker configuration is defined in the general clause 7.1.
7.5B.3 Inter-band EN-DC within FR1
Adjacent channel selectivity requirement for E-UTRA single carrier and CA operation specified in clauses 7.5.1 and 7.5.1A of TS 36.101 [4] and for NR single carrier and CA operation specified in clauses 7.5 and 7.5A of TS 38.101-1 [2] apply.
7.5B.3a Inter-band NE-DC within FR1
Adjacent channel selectivity requirement for E-UTRA single carrier and CA operation specified in clauses 7.5.1 and 7.5.1A of TS 36.101 [4] and for NR single carrier and CA operation specified in clauses 7.5 and 7.5A of TS 38.101-1 [2] apply.
7.5B.4 Inter-band EN-DC including FR2
Adjacent channel selectivity requirement for E-UTRA single carrier and CA operation specified in clauses 7.5.1 and 7.5.1A of TS 36.101 [4] and for NR single carrier and CA operation specified in clauses 7.5, 7.5A and 7.5B of TS 38.101-2 [3] apply.
7.5B.4a Inter-band NE-DC including FR2
Adjacent channel selectivity requirement for E-UTRA single carrier and CA operation specified in clauses 7.5.1 and 7.5.1A of TS 36.101 [4] and for NR single carrier and CA operation specified in clauses 7.5, 7.5A and 7.5B of TS 38.101-2 [3] apply.
7.5B.5 Inter-band EN-DC including both FR1 and FR2
Adjacent channel selectivity requirement for E-UTRA single carrier and CA operation specified in clauses 7.5.1 and 7.5.1A of TS 36.101 [4] and for NR single carrier and CA operation specified in clauses 7.5, 7.5A and 7.5Bof TS 38.101-1 [2] and TS 38.101-2 [3] apply.