5.5B.2 Intra-band contiguous EN-DC
38.101-33GPPNRPart 3: Range 1 and Range 2 Interworking operation with other radiosRelease 17TSUser Equipment (UE) radio transmission and reception
Table 5.5B.2-1: Intra-band contiguous EN-DC configurations
|
EN-DC configuration |
Uplink EN-DC configuration (NOTE 1) |
Single UL allowed |
|
DC_(n)3AA |
DC_(n)3AA6 |
Yes6 |
|
DC_(n)5AA |
DC_(n)5AA6 |
Yes6 |
|
DC_(n)7AA |
DC_(n)7AA6 |
Yes6 |
|
DC_(n)12AA |
DC_(n)12AA6 |
Yes6 |
|
DC_(n)38AA5 |
DC_(n)38AA6 |
Yes6 |
|
DC_(n)41AA5 DC_(n)41AB5 DC_(n)41CA5 DC_(n)41DA5 |
DC_(n)41AA DC_41A_n41A |
Yes3 |
|
DC_(n)48AA5 |
DC_(n)48AA6 |
Yes6 |
|
DC_(n)48CA5 |
DC_(n)48AA6 DC_48A_n48A6 |
Yes6 |
|
DC_(n)48DA5 |
DC_(n)48AA6 DC_48A_n48A6 |
Yes6 |
|
DC_(n)66AA |
DC_(n)66AA6 |
Yes |
|
DC_(n)71AA2 |
DC_(n)71AA |
No4 |
|
NOTE 1: Uplink EN-DC configurations are the configurations supported by the present release of specifications. NOTE 2: Requirements in this specification apply for NR SCS of 15 kHz only. NOTE 3: Single UL allowed due to potential emission issues, not self-interference. NOTE 4: For UE(s) supporting dynamic power sharing it is mandatory to do dual simultaneous UL. For UE(s) not supporting dynamic power sharing single UL is allowed. Uplink DC_(n)71AA is not applicable to BCS2. NOTE 5: The minimum requirements only apply for non-simultaneous Tx/Rx between all carriers. NOTE 6: Only single switched UL is supported |
||