E.5 Conditions for NB-IOT OTDOA intra-frequency RSTD Measurements
37.571-13GPPPart 1: Conformance test specificationRelease 16TSUser Equipment (UE) conformance specification for UE positioning
This clause defines the NB-IoT intra-frequency PRP1,2 applicable for a corresponding operating band.
The conditions for intra-frequency RSTD measurements in normal coverage are defined in Table E.5-1.
The conditions for intra-frequency RSTD measurements in enhanced coverage are defined in Table E.5-2.
Table E.5-1: NB-IoT intra-frequency RSTD measurements for HD-FDD in normal coverage
|
Parameter |
E-UTRA operating band groups Note 1 |
Minimum PRP1,2 Note 1 |
|
dBm/15kHz |
||
|
Conditions |
NFDD_G |
-129 |
|
NOTE 1: E-UTRA operating band groups for NB-IoT are as defined in Section 4.11.1 |
||
Table E.5-2: NB-IoT intra-frequency RSTD measurements for HD-FDD in enhanced coverage
|
Parameter |
E-UTRA operating band groups Note 1 |
Minimum PRP1,2 Note 1 |
|
dBm/15kHz |
||
|
Conditions |
NFDD_G |
-135 |
|
NOTE 1: E-UTRA operating band groups for NB-IoT are as defined in Section 4.11.1 |
||