E.3 Conditions for OTDOA inter-frequency RSTD Measurements
37.571-13GPPPart 1: Conformance test specificationRelease 16TSUser Equipment (UE) conformance specification for UE positioning
This clause defines the E-UTRAN inter-frequency PRP_1,2 applicable for OTDOA Inter-frequency RSTD measurements for a corresponding operating band.
The conditions for E-UTRAN OTDOA inter-frequency RSTD measurements are as defined in Table E.2-1.
E.3.1 Conditions for OTDOA inter-frequency RSTD Measurements by UE Category M1 and M2
This clause defines the E-UTRAN inter-frequency PRP1,2 applicable for a corresponding operating band.
The conditions for CE mode A inter-frequency E-UTRAN HD-FDD, FDD and TDD measurements are defined in Table E.3.1-1.
The conditions for CE mode B for inter-frequency E-UTRAN HD-FDD, FDD and TDD measurements are defined in Table E.3.1-2.
Table E.3.1-1: E-UTRAN inter-frequency measurements for HD-FDD, FDD and TDD for CE mode A
Parameter |
E-UTRA operating band groups Note 2 |
Minimum PRP1,2 |
dBm/15kHz |
||
Conditions |
FDD_A, TDD_A |
-127 |
FDD_D |
-125.5 |
|
FDD_E, TDD_E |
-125 |
|
FDD_F |
-124.5 Note 1 |
|
FDD_G |
-124 |
|
FDD_N |
-120.5 |
|
NOTE 1: The condition is -125 dBm/15kHz when the carrier frequency of the assigned E-UTRA channel bandwidth is within 865-894 MHz. NOTE 2: E-UTRA operating band groups are as defined in Section 4.4.2. |
Table E.3.1-2: E-UTRAN inter-frequency measurements for HD-FDD, FDD and TDD for CE mode B
Parameter |
E-UTRA operating band groups Note 2 |
Minimum PRP1,2 |
dBm/15kHz |
||
Conditions |
FDD_A, TDD_A |
-136 |
FDD_D |
-134.5 |
|
FDD_E, TDD_E |
-134 |
|
FDD_F |
-133.5 Note 1 |
|
FDD_G |
-133 |
|
FDD_N |
-129.5 |
|
NOTE 1: The condition is -125 dBm/15kHz when the carrier frequency of the assigned E-UTRA channel bandwidth is within 865-894 MHz. NOTE 2: E-UTRA operating band groups are as defined in Section 4.4.2. |