E.1 Conditions for E-CID UE Rx – Tx time difference Measurements
37.571-13GPPPart 1: Conformance test specificationRelease 16TSUser Equipment (UE) conformance specification for UE positioning
This clause defines the E-UTRAN RSRP applicable for ECID UE Rx-Tx time difference Measurements for a corresponding operating band
The conditions for E-UTRAN ECID UE Rx-Tx time difference measurements are as defined in Table E.1-1.
Table E.1-1: Conditions for ECID UE Rx-Tx time difference measurements
Parameter |
E-UTRA operating band groups Note 3 |
Minimum |
dBm/15kHz |
||
Conditions |
FDD_A, TDD_A |
-127 |
FDD_B |
-126.5 |
|
FDD_C, TDD_C |
-126 |
|
FDD_D |
-125.5 |
|
FDD_E, TDD_E |
-125 |
|
FDD_F |
-124.5 Note 2 |
|
FDD_G |
-124 |
|
FDD_H |
-123.5 |
|
FDD_N |
-120.5 |
|
NOTE 1: This condition level is increased by ∆>0, when applicable, as described in Sections B.4.2 and B.4.3 of TS 36.133 [23]. NOTE 2: The condition is -125 dBm/15kHz when the carrier frequency of the assigned E-UTRA channel bandwidth is within 865-894 MHz. NOTE 3: E-UTRA operating band groups are as defined in clause 4.4.2. |
E.1.1 Conditions for E-CID UE Rx – Tx time difference by UE Category M1/M2
This clause defines the E-UTRAN RSRP applicable for ECID UE Rx-Tx time difference Measurements for a corresponding operating band for UE Category M1 and M2.
The conditions for CE mode A intra-frequency E-UTRAN FDD, HD-FDD and TDD measurements are defined in Table E.1.1-1.
Table B.2.14-1: E-UTRAN ECID UE Rx-Tx time difference measurements for FDD, HD-FDD and TDD for CE mode A
Parameter |
E-UTRA operating band groups Note 3 |
Minimum |
dBm/15kHz |
||
Conditions |
FDD-M1_A, TDD-M1_A |
-127 |
FDD-M1_D |
-125.5 |
|
FDD-M1_E, TDD-M1_E |
-125 |
|
FDD-M1_F |
-124.5 Note 2 |
|
FDD-M1_G |
-124 |
|
FDD-M1_N |
-120.5 |
|
NOTE 1: This condition level is increased by ∆>0, when applicable, as described in Sections B.4.2 and B.4.3 of TS 36.133 [23]. NOTE 2: The condition is -125 dBm/15kHz when the carrier frequency of the assigned E-UTRA channel bandwidth is within 865-894 MHz. NOTE 3: E-UTRA operating band groups are as defined in clause 4.4.2. |