10.4A_1 TDD RSTD Measurement Accuracy for Carrier Aggregation for 20 MHz Bandwidth (Rel-12 onwards)
37.571-13GPPPart 1: Conformance test specificationRelease 16TSUser Equipment (UE) conformance specification for UE positioning
10.4A_1.1 Test purpose
Same as defined in clause 10.4A.1.
10.4A_1.2 Test applicability
This test applies to all types of E-UTRA TDD UE release 12 and forward that supports UE-assisted OTDOA for Carrier Aggregation.
10.4A_1.3 Minimum conformance requirements
Same as defined in clause 10.4A.3.
The normative reference for this requirement is TS 36.133 [23] clause 9.1.12 and A.9.8.8.
10.4A_1.4 Test description
10.4A_1.4.1 Initial conditions
Same as defined in clause 10.4A.4.1.
10.4A_1.4.2 Test procedure
Same as defined in clause 10.4A.4.2.
10.4A_1.4.3 Message contents
Same as defined in clause 10.4A.4.3.
10.4A_1.5 Test requirement
Same as defined in clause 10.4A.5 except that in addition Table 10.4A_1.5-1 will replace Table 10.4.5-2.
Table 10.4A_1.5-1: RSTD FDD accuracy requirements for the reported values for Carrier Aggregation
Value |
|
Lowest reported value |
RSTD_6381 |
Highest reported value |
RSTD_6391 |