plmn-Identity-perTAC-List

Includes the PLMN identity for each of the TA codes included in trackingAreaCodeList. The PLMN identity listed first in plmn-Identity-perTAC-List corresponds with the TA code listed first in trackingAreaCodeList and so on.

maxWayPointNumber

Indicates the maximum number of way points UE can include in the flight path information report if this information is available at the UE.

includeTimeStamp

Indicates whether time stamp of each way point can be reported in the flight path information report if time stamp information is available at the UE.

neighCellConfig

Provides information related to MBSFN and TDD UL/DL configuration of neighbour cells of this frequency

00: Not all neighbour cells have the same MBSFN subframe allocation as the serving cell on this frequency, if configured, and as the PCell otherwise

10: The MBSFN subframe allocations of all neighbour cells are identical to or subsets of that in the serving cell on this frequency, if configured, and of that in the PCell otherwise

01: No MBSFN subframes are present in all neighbour cells

11: Different UL/DL allocation in neighbouring cells for TDD compared to the serving cell on this frequency, if configured, and compared to the PCell otherwise

For TDD, 00, 10 and 01 are only used for same UL/DL allocation in neighbouring cells compared to the serving cell on this frequency, if configured, and compared to the PCell otherwise.

bw-PreferenceIndicationTimer

Prohibit timer for bandwidth preference indication reporting. Value in seconds. Value s0 means prohibit timer is set to 0 second, value s0dot5 means prohibit timer is set to 0.5 second, value s1 means prohibit timer is set to 1 second and so on.

CandidateServingFreqListNR

Indicates for each candidate NR serving cells, the center frequency around which UE is requested to report IDC issues for MR-DC.

delayBudgetReportingProhibitTimer

Prohibit timer for delay budget reporting. Value in seconds. Value s0 means prohibit timer is set to 0 second, value s0dot4 means prohibit timer is set to 0.4 second, and so on.

idc-HardwareSharingIndication

The field is used to indicate whether the UE is allowed indicate in InDeviceCoexIndication that the cause of the problems are due to hardware sharing, and whether the UE is allowed to omit the TDM assistance information.

idc-Indication

The field is used to indicate whether the UE is configured to initiate transmission of the InDeviceCoexIndication message to the network.

idc-Indication-MRDC

The field is used to indicate whether the UE is configured to provide IDC indications for MR-DC using the InDeviceCoexIndication message.

idc-Indication-UL-CA

The field is used to indicate whether the UE is configured to provide IDC indications for UL CA using the InDeviceCoexIndication message.

measConfigAppLayerContainer

The field contains configuration of application layer measurements, see Annex L (normative) in TS 26.247 [90] and clause 16.5 in TS 26.114 [99]. The maximum number of configurations of application layer measurements that a UE supports is one regardless of serviceType.

serviceType

Indicates the type of application layer measurement. Value qoe indicates Quality of Experience Measurement Collection for streaming services, value qoemtsi indicates Enhanced Quality of Experience Measurement Collection for MTSI.

obtainLocation

Requests the UE to attempt to have detailed location information available using GNSS. E-UTRAN configures the field only if includeLocationInfo is configured for one or more measurements.

overheatingAssistanceConfig

Configuration for the UE to report assistance information to inform the eNB about UE detected internal overheating.

overheatingAssistanceConfigForSCG

The field is used to indicate whether the UE is configured to provide overheating assistance information for NR SCG. E-UTRAN configures value TRUE only when the UE is configured with an NR SCG.

overheatingIndicationProhibitTimer

Prohibit timer for overheating assistance information reporting. Value in seconds. Value s0 means prohibit timer is set to 0 seconds, value s0dot5 means prohibit timer is set to 0.5 second, value s1 means prohibit timer is set to 1 second and so on.

powerPrefIndicationTimer

Prohibit timer for Power Preference Indication reporting. Value in seconds. Value s0 means prohibit timer is set to 0 second, value s0dot5 means prohibit timer is set to 0.5 second, value s1 means prohibit timer is set to 1 second and so on.

reportProximityConfig

Indicates, for each of the applicable RATs (EUTRA, UTRA), whether or not proximity indication is enabled for CSG member cell(s) of the concerned RAT. Note.

rlmReportTimer

Prohibit timer for RLM event reporting, i.e. "early-out-of-sync" and "early-in-sync" event reporting, as specified in clause 5.6.10. Value in seconds. Value s0 means prohibit timer is set to 0 second, value s0dot5 means prohibit timer is set to 0.5 second, value s1 means prohibit timer is set to 1 second and so on.

rlmReportRep-MPDCCH

The field is used to indicate whether the UE is configured to report excess repetitions on MPDCCH.

sps-AssistanceInfoReport

Value TRUE indicates that the UE is allowed to report SPS-AssistanceInformation. If the sl-V2X-SPS-Config is provided by an E-UTRA RRCConnectionReconfiguration message embedded within an NR RRCReconfiguration for V2X sidelink communication (i.e. sl-ConfigDedicatedEUTRA) as in TS 38.331 [82], the network should configure the otherConfig and set this field to TRUE.

idc-Ind

The field is optionally present if idc-Indication is present, need OR. Otherwise the field is not present.

overheating

The field is optionally present, need ON, if the UE is configured with overheatingAssistanceConfig; if overheatingAssistanceConfig is included and set to release, the UE shall delete any existing value for this field; otherwise, the field is not present.

sst

Indicates the S-NSSAI consists of Slice/Service Type, see TS 23.003 [27].

sst-SD

Indicates the S-NSSAI consists of Slice/Service Type and Slice Differentiator, see TS 23.003 [27].

m-TMSI

The first/leftmost bit of the bit string contains the most significant bit of the M-TMSI.

ueCapabilityRAT-Container

Container for the UE capabilities of the indicated RAT. The encoding is defined in the specification of each RAT:

For E‑UTRA: the encoding of UE capabilities is defined in IE UE-EUTRA-Capability.

For UTRA: the octet string contains the INTER RAT HANDOVER INFO message defined in TS 25.331 [19].

For GERAN CS: the octet string contains the concatenated string of the Mobile Station Classmark 2 and Mobile Station Classmark 3. The first 5 octets correspond to Mobile Station Classmark 2 and the following octets correspond to Mobile Station Classmark 3. The Mobile Station Classmark 2 is formatted as ‘TLV’ and is coded in the same way as the Mobile Station Classmark 2 information element in TS 24.008 [49]. The first octet is the Mobile station classmark 2 IEI and its value shall be set to 33H. The second octet is the Length of mobile station classmark 2 and its value shall be set to 3. The octet 3 contains the first octet of the value part of the Mobile Station Classmark 2 information element, the octet 4 contains the second octet of the value part of the Mobile Station Classmark 2 information element and so on. For each of these octets, the first/ leftmost/ most significant bit of the octet contains b8 of the corresponding octet of the Mobile Station Classmark 2. The Mobile Station Classmark 3 is formatted as ‘V’ and is coded in the same way as the value part in the Mobile station classmark 3 information element in TS 24.008 [49]. The sixth octet of this octet string contains octet 1 of the value part of Mobile station classmark 3, the seventh of octet of this octet string contains octet 2 of the value part of Mobile station classmark 3 and so on. Note.

For GERAN PS: the encoding of UE capabilities is formatted as ‘V’ and is coded in the same way as the value part in the MS Radio Access Capability information element in TS 24.008 [49].

For CDMA2000-1XRTT: the octet string contains the A21 Mobile Subscription Information and the encoding of this is defined in A.S0008 [33]. The A21 Mobile Subscription Information contains the supported CDMA2000 1xRTT band class and band sub-class information.

For NR: The octet string contains the IE UE-NR-Capability as defined in TS 38.331 [82].

For EUTRA-NR: The octet string contains the IE UE-MRDC-Capability as defined in TS 38.331 [82]

accessStratumRelease

Set to rel17 in this version of the specification. NOTE 7.

–

additionalRx-Tx-PerformanceReq

Indicates whether the UE supports the additional Rx and Tx performance requirement for a given band combination as specified in TS 36.101 [42].

–

addSRS

Presence of this field indicates the UE supports the additional SRS symbol(s) within the normal UL subframes in TDD as described in TS 36.213 [23].

–

addSRS-1T2R

Indicates whether the UE supports selecting one antenna among two antennas to transmit additional SRS symbol(s) for the corresponding band of the band combination as described in TS 36.213 [23].

–

addSRS-1T4R

Indicates whether the UE supports selecting one antenna among four antennas to transmit additional SRS symbol(s) for the corresponding band of the band combination as described in TS 36.213 [23].

–

addSRS-2T4R-2Pairs

Indicates whether the UE supports selecting one antenna pair between two antenna pairs to transmit additional SRS symbol(s) simultaneously for the corresponding band of the band combination as described in TS 36.213 [23].

–

addSRS-2T4R-3Pairs

Indicates whether the UE supports selecting one antenna pair among three antenna pairs to transmit additional SRS symbol(s) simultaneously for the corresponding band of the band combination as described in TS 36.213 [23].

–

addSRS-AntennaSwitching (in addSRS)

Value useBasic indicates the antenna switching capabilities for additional SRS symbol(s) for a band of band combination for which the capability is not signalled in bandParameterList-v1610 is the same as indicated by bandParameterList-v1380 and/or bandParameterList-v1530 for the concerned band of band combination.

–

addSRS-AntennaSwitching (in bandParameterList-v1610)

If signalled, the field indicates the antenna switching capabilities for additional SRS symbol(s) for the concerned band of band combination.

–

addSRS-CarrierSwitching (in addSRS)

Indicates whether carrier switching is supported for additional SRS symbol(s) for all band pairs of band combinations for which UE supports SRS carrier switching. This field is included only if srs-CapabilityPerBandPairList-r14 is included. If this field is included, addSRS-CarrierSwitching (in bandParameterList-v1610) is not included.

–

addSRS-CarrierSwitching (in bandParameterList-v1610)

Indicates whether carrier switching is supported for additional SRS symbol(s) for the concerned band pair of band combination. This field is included only if srs-CapabilityPerBandPairList-r14 is included.If this field is included, addSRS-CarrierSwitching (in addSRS) is not included.

–

addSRS-FrequencyHopping (in addSRS)

Indicates whether frequency hopping is supported for additional SRS symbol(s) for all bands of band combinations for which the capability is not signalled in bandParameterList-v1610.

–

addSRS-FrequencyHopping (in bandParameterList-v1610)

If signalled, the field indicates whether frequency hopping is supported for additional SRS symbol(s) for the concerned band of band combination.

–

allowedCellList

Indicates whether the UE supports EUTRA allowed-cell listing to limit the set of cells applicable for measurements.

–

alternativeTBS-Indices

Indicates whether the UE supports alternative TBS indices I_TBS 26A and 33A as specified in TS 36.213 [23].

–

alternativeTBS-Index

Indicates whether the UE supports alternative TBS index I_TBS 33B as specified in TS 36.213 [23].

No

alternativeTimeToTrigger

Indicates whether the UE supports alternativeTimeToTrigger.

No

altFreqPriority

Indicates whether the UE supports alternative cell reselection priority.

No

altMCS-Table

Indicates whether the UE supports the 6-bit MCS table as specified in TS 36.212 [22] and TS 36.213 [23].

Yes

aperiodicCSI-Reporting

Indicates whether the UE supports aperiodic CSI reporting with 3 bits of the CSI request field size as specified in TS 36.213 [23], clause 7.2.1 and/or aperiodic CSI reporting mode 1-0 and mode 1-1 as specified in TS 36.213 [23], clause 7.2.1. The first bit is set to "1" if the UE supports the aperiodic CSI reporting with 3 bits of the CSI request field size. The second bit is set to "1" if the UE supports the aperiodic CSI reporting mode 1-0 and mode 1-1.

No

aperiodicCsi-ReportingSTTI

Indicates whether the UE supports aperiodic CSI reporting for short TTI as specified in TS 36.213 [23], clause 7.2.1.

Yes

appliedCapabilityFilterCommon

Contains the filter, applied by the UE, common for all MR-DC related capability containers that are requested and as defined by UE-CapabilityRequestFilterCommon IE in TS 38.331 [82].

–

assistInfoBitForLC

Indicates whether the UE supports assistance information bit for local cache.

–

aul

Indicates whether the UE supports AUL as specified n TS 36.321 [6].

–

bandCombinationListEUTRA

One entry corresponding to each supported band combination listed in the same order as in supportedBandCombination.

–

BandCombinationParameters-v1090, BandCombinationParameters-v10i0, BandCombinationParameters-v1270

If included, the UE shall include the same number of entries, and listed in the same order, as in BandCombinationParameters-r10.

–

BandCombinationParameters-v1130

The field is applicable to each supported CA bandwidth class combination (i.e. CA configuration in TS 36.101 [42], clause 5.6A.1) indicated in the corresponding band combination. If included, the UE shall include the same number of entries, and listed in the same order, as in BandCombinationParameters-r10.

–

bandEUTRA

E‑UTRA band as defined in TS 36.101 [42]. In case the UE includes bandEUTRA-v9e0 or bandEUTRA-v1090, the UE shall set the corresponding entry of bandEUTRA (i.e. without suffix) or bandEUTRA-r10 respectively to maxFBI.

–

bandInfoNR-v1610

One entry corresponding to each supported E-UTRA band listed in the same order as in supportedBandListEUTRA. If absent, network assumes gap is required when measurement is performed on any NR bands while UE is served by cell(s) belongs to a E-UTRA band listed in supportedBandListEUTRA except for the FR2 inter-RAT measurement which depends on the support of independentGapConfig.

–

bandListEUTRA

One entry corresponding to each supported E‑UTRA band listed in the same order as in supportedBandListEUTRA.

–

bandParameterList-v1380

If included, the UE shall include the same number of entries listed in the same order as the band entries in the corresponding band combination.

–

bandParametersUL, bandParametersDL

Indicates the supported parameters for the band. Each of CA-MIMO-ParametersUL and CA-MIMO-ParametersDL can be included only once for one band in a single band combination entry.

–

beamformed (in MIMO-CA-ParametersPerBoBCPerTM)

If signalled, the field indicates for a particular transmission mode, the UE capabilities concerning beamformed EBF/ FD-MIMO operation (class B) applicable for the concerned band combination.

–

beamformed (in MIMO-UE-ParametersPerTM)

Indicates for a particular transmission mode, the UE capabilities concerning beamformed EBF/ FD-MIMO operation (class B) applicable for band combinations for which the concerned capabilities are not signalled.

Yes

benefitsFromInterruption

Indicates whether the UE power consumption would benefit from being allowed to cause interruptions to serving cells when performing measurements of deactivated SCell carriers for measCycleSCell of less than 640ms, as specified in TS 36.133 [16].

No

bwPrefInd

Indicates whether the UE supports maximum PDSCH/PUSCH bandwidth preference indication.

–

ca-BandwidthClass

The CA bandwidth class supported by the UE as defined in TS 36.101 [42], Table 5.6A-1.

The UE explicitly includes all the supported CA bandwidth class combinations in the band combination signalling. Support for one CA bandwidth class does not implicitly indicate support for another CA bandwidth class.

–

ca-IdleModeMeasurements

Indicates whether UE supports reporting measurements performed during RRC_IDLE.

–

ca-IdleModeValidityArea

Indicates whether UE supports validity area for IDLE measurements during RRC_IDLE.

–

cch-IM-RefRecTypeA-OneRX-Port

This field defines whether the DL Category 1bis or the DL Category M2 UE supports Type A downlink control channel interference mitigation (CCH-IM) receiver "LMMSE-IRC + CRS-IC" for PDCCH/PCFICH/PHICH/EPDCCH receive processing (Enhanced downlink control channel performance requirements Type A in TS 36.101 [6]).

No

cch-InterfMitigation-RefRecTypeA, cch-InterfMitigation-RefRecTypeB, cch-InterfMitigation-MaxNumCCs

The field cch-InterfMitigation-RefRecTypeA defines whether the UE supports Type A downlink control channel interference mitigation (CCH-IM) receiver "LMMSE-IRC + CRS-IC" for PDCCH/PCFICH/PHICH/EPDCCH receive processing (Enhanced downlink control channel performance requirements Type A in the TS 36.101 [6]). The field cch-InterfMitigation-RefRecTypeB defines whether the UE supports Type B downlink CCH-IM receiver "E-LMMSE-IRC + CRS-IC" for PDCCH/PCFICH/PHICH receive processing in synchronous networks (Enhanced downlink control channel performance requirements Type B in the TS 36.101 [6]). The UE supporting the capability defined by cch-InterfMitigation-RefRecTypeB-r13 shall also support the capability defined by cch-InterfMitigation-RefRecTypeA-r13.

If the UE sets one or more of the fields cch-InterfMitigation-RefRecTypeA and cch-InterfMitigation-RefRecTypeB to "supported", the UE shall include the parameter cch-InterfMitigation-MaxNumCCs to indicate that the UE supports CCH-IM on at least one arbitrary downlink CC for up to cch-InterfMitigation-MaxNumCCs downlink CC CA configuration. The UE shall not include the parameter cch-InterfMitigation-MaxNumCCs if neither cch-InterfMitigation-RefRecTypeA nor cch-InterfMitigation-RefRecTypeB is present. The UE may not perform CCH-IM on more than 1 DL CCs. For example, the UE sets "cch-InterfMitigation-MaxNumCCs = 3" to indicate that UE supports CCH-IM on at least one DL CC for supported non-CA, 2DL CA and 3DL CA configurations. For CA scenarios, the CCH-IM is guaranteed to be supported on at least one arbitrary component carrier.

–

cdma2000-NW-Sharing

Indicates whether the UE supports network sharing for CDMA2000.

–

ce-ClosedLoopTxAntennaSelection

Indicates whether the UE supports UL closed-loop Tx antenna selection in CE mode A, as specified in TS 36.212 [22].

Yes

ce-CQI-AlternativeTable

Indicates whether the UE supports alternative CQI table in CE mode A. See TS 36.213 [22].

Yes

ce-CRS-IntfMitig

Indicates whether UE supports CRS interference mitigation, i.e., value supported indicates UE does not rely on the CRS outside certain PRBs and subframes as defined in TS 36.133 [16], clauses 3.6.1.2 and 3.6.1.3, and TS 36.213 [23] when operating in coverage enhancement mode.

Yes

ce-CSI-RS-Feedback

Indicates whether the UE supports CSI-RS based feedback when the UE is operating in CE mode A, as specified in TS 36.213 [23].

Yes

ce-CSI-RS-FeedbackCodebookRestriction

Indicates whether the UE supports CSI-RS based feedback with codebook subset restriction when the UE in CE is operating in CE mode A, as specified in TS 36.213 [23].

Yes

ce-DL-ChannelQualityReporting

Indicates whether UE operating in CE mode supports aperiodic DL channel quality reporting in RRC_CONNECTED.

Yes

ce-EUTRA-5GC

Indicates whether the UE operating in CE mode A or B supports E-UTRA/5GC.

Yes

ce-EUTRA-5GC-HO-ToNR-FDD-FR1

Indicates whether the UE operating in CE mode A or B supports handover from E-UTRA/5GC to NR FDD FR1.

Yes

ce-EUTRA-5GC-HO-ToNR-TDD-FR1

Indicates whether the UE operating in CE mode A or B supports handover from E-UTRA/5GC to NR TDD FR1.

Yes

ce-EUTRA-5GC-HO-ToNR-FDD-FR2

Indicates whether the UE operating in CE mode A or B supports handover from E-UTRA/5GC to NR FDD FR2.

Yes

ce-EUTRA-5GC-HO-ToNR-TDD-FR2

Indicates whether the UE operating in CE mode A or B supports handover from E-UTRA/5GC to NR TDD FR2-1 as specified in TS 38.101-x [xx].

Yes

ce-EUTRA-5GC-HO-ToNR-TDD-FR2-2

Indicates whether the UE operating in CE mode A or B supports handover from E-UTRA/5GC to NR TDD FR2-2 as specified in TS 38.101-x [xx].

–

ce-HARQ-AckBundling

Indicates whether the UE supports HARQ-ACK bundling in half duplex FDD in CE mode A, as specified in TS 36.212 [22] and TS 36.213 [23].

–

ce-InactiveState

Indicates whether UE operating in CE mode supports RRC_INACTIVE when connected to 5GC. A UE including this field also supports short eDRX cycles in RRC_INACTIVE when connected to 5GC.

No

ce-MeasRSS-Dedicated, ce-MeasRSS-DedicatedSameRBs

Indicates whether the UE operating in CE mode A/B supports receiving neighbour cell RSS information in dedicated signalling and performing serving cell and neighbour cell measurements based on RSS in RRC_CONNECTED as specified in TS 36.306 [5] and TS 36.133 [16].

Yes

ce-ModeA, ce-ModeB

Indicates whether the UE supports operation in CE mode A and/or B, as specified in TS 36.211 [21] and TS 36.213 [23].

–

crs-ChEstMPDCCH-CE-ModeA, crs-ChEstMPDCCH-CE-ModeB

Indicates whether UE operating in CE mode A/B supports using CRS for improving MPDCCH channel estimation.

Yes

crs-ChEstMPDCCH-CSI

Indicates whether UE operating in CE mode A supports CSI-based mapping for improving MPDCCH channel estimation.

Yes

crs-ChEstMPDCCH-ReciprocityTDD

Indicates whether UE operating in CE mode A supports using CRS for improving MPDCCH channel estimation with reciprocity-based candidates in TDD.

No

ceMeasurements

Indicates whether the UE supports intra-frequency RSRQ measurements and inter-frequency RSRP and RSRQ measurements in RRC_CONNECTED, as specified in TS 36.133 [16] and TS 36.304 [4].

–

ce-MultiTB-64QAM

Indicates whether the UE supports downlink 64QAM for multiple TB scheduling in connected mode for PDSCH when operating in CE mode A, as specified in TS 36.211 [21] and TS 36.213 [23]. This field can be included only if ce-PUSCH-SubPRB-Allocation is included.

Yes

ce-MultiTB-EarlyTermination

Indicates whether the UE supports early termination of PUSCH transmission for multiple TB scheduling in connected mode, as specified in TS 36.211 [21] and TS 36.213 [23].

Yes

ce-MultiTB-FrequencyHopping

Indicates whether the UE supports frequency hopping for multiple TB scheduling for PDSCH/PUSCH in connected mode, as specified in TS 36.211 [21] and TS 36.213 [23].

Yes

ce-MultiTB-HARQ-AckBundling

Indicates whether the UE supports downlink HARQ-ACK bundling for multiple TB scheduling in connected mode when operating in CE mode A, as specified in TS 36.211 [21] and TS 36.213 [23].

Yes

ce-MultiTB-Interleaving

Indicates whether the UE supports TB interleaving for multiple TB scheduling in connected mode for PDSCH/PUSCH when operating in CE mode A or B, as specified in TS 36.211 [21] and TS 36.213 [23].

Yes

ce-MultiTB-SubPRB

Indicates whether the UE supports sub-PRB allocation for multiple TB scheduling for PUSCH in connected mode, as specified in TS 36.211 [21] and TS 36.213 [23]. This field can be included only if ce-PUSCH-SubPRB-Allocation is included.

Yes

ce-PDSCH-14HARQProcesses, ce-PDSCH-14HARQProcesses-Alt2

Indicates whether the UE supports 14-HARQ processes, as specified in TS 36.212 [22].

–

ce-PDSCH-64QAM

Indicates whether the UE supports 64QAM for non-repeated unicast PDSCH in CE mode A.

Yes

ce-PDSCH-FlexibleStartPRB-CE-ModeA, ce-PDSCH-FlexibleStartPRB-CE-ModeB,

ce-PUSCH-FlexibleStartPRB-CE-ModeA, ce-PUSCH-FlexibleStartPRB-CE-ModeB

This field indicates whether UE supports flexible starting PRB for PDSCH/PUSCH when operating in coverage enhancement mode A/B, as specified in TS 36.211 [21] and TS 36.213 [22].

Yes

ce-PDSCH-MaxTBS

Indicates whether the UE supports downlink TBS of 1736 bits, as specified in TS 36.212 [22].

–

ce-PDSCH-PUSCH-Enhancement

Indicates whether the UE supports new numbers of repetitions for PUSCH and modulation restrictions for PDSCH/PUSCH in CE mode A as specified in TS 36.212 [22] and TS 36.213 [23].

No

ce-PDSCH-PUSCH-MaxBandwidth

Indicates the maximum supported PDSCH/PUSCH channel bandwidth in CE mode A and B, as specified in TS 36.212 [22] and TS 36.213 [23]. Value bw5 corresponds to 5 MHz and value bw20 corresponds to 20 MHz. If the field is absent the maximum PDSCH/PUSCH channel bandwidth in CE mode A and B is 1.4 MHz. If the setting of this parameter is 20 MHz, the max supported PUSCH channel bandwidth in CE mode A is 5 MHz. The maximum PUSCH channel bandwidth in CE mode B is 1.4 MHz regardless of the setting of this parameter. Parameter: transmission bandwidth configuration, see TS 36.101 [42], table 5.6-1.

Yes

ce-PDSCH-TenProcesses

Indicates whether the UE supports 10 DL HARQ processes in FDD in CE mode A.

Yes

ce-PUCCH-Enhancement

Indicates whether the UE supports repetition levels 64 and 128 for PUCCH in CE Mode B, as specified in TS 36.211 [21] and in TS 36.213 [23].

No

ce-PUSCH-NB-MaxTBS

Indicates whether the UE supports 2984 bits max UL TBS in 1.4 MHz in CE mode A operation, as specified in TS 36.212 [22] and TS 36.213 [23].

Yes

ce-PUSCH-SubPRB-Allocation

Indicates whether the UE supports sub-PRB resource allocation for PUSCH in CE mode A or B, as specified in TS 36.211 [21], TS 36.212 [22] and TS 36.213 [23].

Yes

ce-RetuningSymbols

Indicates the number of retuning symbols in CE mode A and B as specified in TS 36.211 [21]. Value n0 corresponds to 0 retuning symbols and value n1 corresponds to 1 retuning symbol. If the field is absent the number of retuning symbols in CE mode A and B is 2.

No

ce-SchedulingEnhancement

Indicates whether the UE supports dynamic HARQ-ACK delay for HD-FDD in CE mode A as specified in TS 36.212 [22] and TS 36.213 [23].

No

ce-SRS-Enhancement

Indicates whether the UE supports SRS coverage enhancement in TDD with support of SRS combs 2 and 4 as specified in TS 36.213 [23]. This field can be included only if ce-SRS-EnhancementWithoutComb4 is not included.

Yes

ce-SRS-EnhancementWithoutComb4

Indicates whether the UE supports SRS coverage enhancement in TDD with support of SRS comb 2 but without support of SRS comb 4 as specified in TS 36.213 [23]. This field can be included only if ce-SRS-Enhancement is not included.

–

ce-SwitchWithoutHO

Indicates whether the UE supports switching between normal mode and enhanced coverage mode without handover.

–

ce-UL-HARQ-ACK-Feedback

This field indicates whether UE supports uplink HARQ ACK feedback when operating in coverage enhancement, as specified in TS36.213 [22].

Yes

channelMeasRestriction

Indicates for a particular transmission mode whether the UE supports channel measurement restriction.

Yes

cho

Indicates whether the UE supports conditional handover including execution condition, candidate cell configuration and maximum 8 candidate cells.

Yes

cho-Failure

Indicates whether the UE supports conditional handover during re-establishment procedure when the selected cell is configured as candidate cell for condition handover.

Yes

cho-FDD-TDD

Indicates whether the UE supports conditional handover between FDD and TDD cells.

No

cho-TwoTriggerEvents

Indicates whether the UE supports 2 trigger events for same execution condition. It is mandatory supported if the UE suppors cho.

Yes

codebook-HARQ-ACK

Indicates whether the UE supports determining HARQ ACK codebook size based on the DAI-ased solution and/or the number of configured CCs. The first bit is set to "1" if the UE supports the DAI-based codebook size determination. The second bit is set to "1" if the UE supports the codebook determination based on the number of configured CCs.

No

commMultipleTx

Indicates whether the UE supports multiple transmissions of sidelink communication to different destinations in one SC period. If commMultipleTx-r13 is set to supported then the UE support 8 transmitting sidelink processes.

–

commSimultaneousTx

Indicates whether the UE supports simultaneous transmission of EUTRA and sidelink communication (on different carriers) in all bands for which the UE indicated sidelink support in a band combination (using commSupportedBandsPerBC).

–

commSupportedBands

Indicates the bands on which the UE supports sidelink communication, by an independent list of bands i.e. separate from the list of supported E-UTRA band, as indicated in supportedBandListEUTRA.

–

commSupportedBandsPerBC

Indicates, for a particular band combination, the bands on which the UE supports simultaneous reception of EUTRA and sidelink communication. If the UE indicates support simultaneous transmission (using commSimultaneousTx), it also indicates, for a particular band combination, the bands on which the UE supports simultaneous transmission of EUTRA and sidelink communication. The first bit refers to the first band included in commSupportedBands, with value 1 indicating sidelink is supported.

–

configN (in MIMO-CA-ParametersPerBoBCPerTM)

If signalled, the field indicates for a particular transmission mode whether the UE supports non-precoded EBF/ FD-MIMO (class A) related configuration N for the concerned band combination.

–

configN (in MIMO-UE-ParametersPerTM)

Indicates for a particular transmission mode whether the UE supports non-precoded EBF/ FD-MIMO (class A) related configuration N for band combinations for which the concerned capabilities are not signalled.

Yes

continueEHC-Context

Indicates that the UE supports EHC context continuation operation where the UE keeps the established EHC context(s) upon PDCP re-establishment, as specified in TS 36.323 [8].

No

crossCarrierScheduling

Yes

crossCarrierScheduling-B5C

Indicates whether the UE supports cross carrier scheduling beyond 5 DL CCs.

No

crossCarrierSchedulingLAA-DL

Indicates whether the UE supports cross-carrier scheduling from a licensed carrier for LAA cell(s) for downlink. This field can be included only if downlinkLAA is included.

–

crossCarrierSchedulingLAA-UL

Indicates whether the UE supports cross-carrier scheduling from a licensed carrier for LAA cell(s) for uplink. This field can be included only if uplinkLAA is included.

–

crs-DiscoverySignalsMeas

Indicates whether the UE supports CRS based discovery signals measurement, and PDSCH/EPDCCH RE mapping with zero power CSI-RS configured for discovery signals.

Yes

crs-IM-TM1-toTM9-OneRX-Port

Indicates whether the DL Cateogry 1bis UE ot the DL Category M2 UE supports CRS interference mitigation (IM) while operating in the following transmission modes (TM): TM 1, TM 2, …, TM 8 and TM 9.

No

crs-InterfHandl

Indicates whether the UE supports CRS interference handling.

Yes

crs-InterfMitigationTM10

The field defines whether the UE supports CRS interference mitigation in transmission mode 10. The UE supporting the crs-InterfMitigationTM10 capability shall also support the crs-InterfHandl capability.

No

crs-InterfMitigationTM1toTM9

Indicates whether the UE supports CRS interference mitigation (IM) while operating in the following transmission modes (TM): TM 1, TM 2, …, TM 8 and TM 9. The UE shall not include the field if it does not support CRS IM in TMs 1-9. If the field is present, the UE supports CRS-IM on at least one arbitrary downlink CC for up to crs-InterfMitigationTM1toTM9-r13 downlink CC CA configuration. The UE signals crs-InterfMitigationTM1toTM9-r13 value to indicate the maximum crs-InterfMitigationTM1toTM9-r13 downlink CC CA configuration where UE may apply CRS IM. For example, the UE sets "crs-InterfMitigationTM1toTM9-r13 = 3" to indicate that the UE supports CRS-IM on at least one DL CC for supported non-CA, 2DL CA and 3DL CA configurations. The UE supporting the crs-InterfMitigationTM1toTM9-r13 capability shall also support the crs-InterfHandl-r11 capability.

–

crs-IntfMitig

Indicate whether the UE supports CRS interference mitigation as specified in TS 36.133 [16], clause 3.6.1.1.

Yes

crs-LessDwPTS

Indicates whether the UE supports TDD special subframe configuration 10 without CRS transmission on the 5th symbol of DwPTS, i.e. ssp10-CRS-LessDwPTS, as specified in TS 36.211 [17].

–

csi-ReportingAdvanced, csi-ReportingAdvancedMaxPorts (in MIMO-CA-ParametersPerBoBCPerTM)

If signalled, the field indicates that for a particular transmission mode, the maximum number of CSI-RS ports supported by the UE for advanced CSI reporting is different in the concerned band of band combination than the value indicated by the field csi-ReportingAdvanced or csi-ReportingAdvancedMaxPorts in MIMO-UE-ParametersPerTM. The UE shall not include both csi-ReportingAdvanced and csi-ReportingAdvancedMaxPorts for a particular transmission mode in the concerned band of band combination.

–

csi-ReportingAdvanced (in MIMO-UE-ParametersPerTM)

Indicates for a particular transmission mode the maximum number of CSI-RS ports supported by the UE for advanced CSI reporting. The field csi-ReportingAdvanced indicates 32 CSI-RS ports. The UE shall not include both csi-ReportingAdvanced and csi-ReportingAdvancedMaxPorts for a particular transmission mode.

Yes

csi-ReportingAdvancedMaxPorts (in MIMO-UE-ParametersPerTM)

Indicates for a particular transmission mode the maximum number of CSI-RS ports supported by the UE for advanced CSI reporting. The field csi-ReportingAdvancedMaxPorts indicates 8, 12, 16, 20, 24 or 28 CSI-RS ports. The UE shall not include both csi-ReportingAdvanced and csi-ReportingAdvancedMaxPorts for a particular transmission mode.

–

csi-ReportingNP (in MIMO-CA-ParametersPerBoBCPerTM)

If signalled, value different indicates that for a particular transmission mode, the CSI reporting on non-precoded CSI-RS with 20, 24, 28 or 32 antenna ports for the concerned band of band combination is different than the value indicated by field csi-ReportingNP in MIMO-UE-ParametersPerTM.

–

csi-ReportingNP (in MIMO-UE-ParametersPerTM)

Indicates for a particular transmission mode whether the UE supports CSI reporting on non-precoded CSI-RS with 20, 24, 28, or 32 antenna ports for band combinations for which the concerned capabilities are not signalled in MIMO-CA-ParametersPerBoBCPerTM, and the FD-MIMO processing capability condition as described in NOTE 8 is satisfied.

Yes

csi-RS-DiscoverySignalsMeas

Indicates whether the UE supports CSI-RS based discovery signals measurement. If this field is included, the UE shall also include crs-DiscoverySignalsMeas.

Yes

csi-RS-DRS-RRM-MeasurementsLAA

Indicates whether the UE supports performing RRM measurements on LAA cell(s) based on CSI-RS-based DRS. This field can be included only if downlinkLAA is included.

–

csi-RS-EnhancementsTDD

Indicates for a particular transmission mode whether the UE supports CSI-RS enhancements applicable for TDD.

Yes

csi-SubframeSet

Indicates whether the UE supports REL-12 DL CSI subframe set configuration, REL-12 DL CSI subframe set dependent CSI measurement/feedback, configuration of up to 2 CSI-IM resources for a CSI process with no more than 4 CSI-IM resources for all CSI processes of one frequency if the UE supports tm10, configuration of two ZP-CSI-RS for tm1 to tm9, PDSCH RE mapping with two ZP-CSI-RS configurations, and EPDCCH RE mapping with two ZP-CSI-RS configurations if the UE supports EPDCCH. This field is only applicable for UEs supporting TDD.

Yes

dataInactMon

Indicates whether the UE supports the data inactivity monitoring as specified in TS 36.321 [6].

–

dc-Support

Including this field indicates that the UE supports synchronous DC and power control mode 1. Including this field for a band combination entry comprising of single band entry indicates that the UE supports intra-band contiguous DC. Including this field for a band combination entry comprising of two or more band entries, indicates that the UE supports DC for these bands and that the serving cells corresponding to a band entry shall belong to one cell group (i.e. MCG or SCG). Including field asynchronous indicates that the UE supports asynchronous DC and power control mode 2. Including this field for a TDD/FDD band combination indicates that the UE supports TDD/FDD DC for this band combination.

–

delayBudgetReporting

Indicates whether the UE supports delay budget reporting.

No

demodulationEnhancements

This field defines whether the UE supports advanced receiver in SFN scenario (350 km/h) as specified in TS 36.101 [42].

–

demodulationEnhancements2

This field defines whether the UE supports further enhanced receiver in HST-SFN scenario (up to 500 km/h velocity) as specified in TS 36.101 [42].

–

densityReductionNP, densityReductionBF

Indicates whether the UE supports CSI-RS density reduction with values 1, 1/2 and 1/3 for non-precoded CSI-RS and beamformed CSI-RS respectively.

Yes

deviceType

UE may set the value to "noBenFromBatConsumpOpt" when it does not foresee to particularly benefit from NW-based battery consumption optimisation. Absence of this value means that the device does benefit from NW-based battery consumption optimisation.

–

diffFallbackCombReport

Indicates that the UE supports reporting of UE radio access capabilities for the CA band combinations asked by the eNB as well as, if any, reporting of different UE radio access capabilities for their fallback band combination as specified in TS 36.306 [5]. The UE does not report fallback combinations if their UE radio access capabilities are the same as the ones for the CA band combination asked by the eNB.

–

differentFallbackSupported

Indicates that the UE supports different capabilities for at least one fallback case of this band combination.

–

directMCG-SCellActivationResume

Indicates whether the UE supports having an E-UTRA MCG SCell configured in activated SCell state.

–

directSCellActivation

Indicates whether the UE supports having an E-UTRA SCell configured in activated SCell state in the RRCConnectionReconfiguration message. This field is applicable to both LTE standalone and LTE-DC.

–

directSCellHibernation

Indicates whether the UE supports having an SCell configured in dormant SCell state.

–

directSCG-SCellActivationNEDC

Indicates whether the UE supports having an E-UTRA SCG SCell configured in activated SCell state in the RRCConnectionReconfiguration message contained in the NR RRCReconfiguration message, as defined in TS 36.321 [6] and TS 38.331 [82].

If the UE indicates support of directSCG-SCellActivationNEDC-r16, the UE shall also indicate support of ne-dc as specified in TS 38.331 [82].

–

directSCG-SCellActivationResume

Indicates whether the UE supports having an E-UTRA SCG SCell configured in activated SCell state.

–

discInterFreqTx

Indicates whether the UE support sidelink discovery announcements either a) on the primary frequency only or b) on other frequencies also, regardless of the UE configuration (e.g. CA, DC). The UE may set discInterFreqTx to supported when having a separate transmitter or if it can request sidelink discovery transmission gaps.

–

discoverySignalsInDeactSCell

Indicates whether the UE supports the behaviour on DL signals and physical channels when SCell is deactivated and discovery signals measurement is configured as specified in TS 36.211 [21], clause 6.11A. This field is included only if UE supports carrier aggregation and includes crs-DiscoverySignalsMeas.

Yes

discPeriodicSLSS

Indicates whether the UE supports periodic (i.e. not just one time before sidelink discovery announcement) Sidelink Synchronization Signal (SLSS) transmission and reception for sidelink discovery.

–

discScheduledResourceAlloc

Indicates whether the UE supports transmission of discovery announcements based on network scheduled resource allocation.

–

disc-UE-SelectedResourceAlloc

Indicates whether the UE supports transmission of discovery announcements based on UE autonomous resource selection.

–

disc–SLSS

Indicates whether the UE supports Sidelink Synchronization Signal (SLSS) transmission and reception for sidelink discovery.

–

discSupportedBands

Indicates the bands on which the UE supports sidelink discovery. One entry corresponding to each supported E-UTRA band, listed in the same order as in supportedBandListEUTRA.

–

discSupportedProc

Indicates the number of processes supported by the UE for sidelink discovery.

–

discSysInfoReporting

Indicates whether the UE supports reporting of system information for inter-frequency/PLMN sidelink discovery.

–

dl-256QAM

Indicates whether the UE supports 256QAM in DL on the band.

–

dl-1024QAM

Indicates whether the UE supports 1024QAM in DL on the band or on the band within the band combination. When dl-1024QAM-ScalingFactor and dl-1024QAM-TotalWeightedLayers are included, the UE supports 1024QAM in a set of CCs in a band combination if the CCs belong to bands indicated to support 1024QAM in that band combination and the 1024QAM processing capability condition as specified in equation 4.3.5.31-1 in TS 36.306 [5] is satisfied.

–

dl-1024QAM-ScalingFactor

Indicates scaling factor for processing a CC configured with 1024QAM with respect to a CC not configured with 1024QAM as described in 4.3.5.31 in TS 36.306 [5]. Value v1 indicates 1, value v1dot2 indicates 1.2 and value v1dot25 indicates 1.25.

–

dl-1024QAM-TotalWeightedLayers

Indicates total number of weighted layers the UE can process for 1024QAM as described in 4.3.5.31 in TS 36.306 [5]. Actual value = (10 + indicated value x 2), i.e., value 0 indicates 10 layers, value 1 indicates 12 layers and so on.

–

dl-1024QAM-Slot

Indicates whether the UE supports 1024QAM in DL on the band for slot TTI operation.

–

dl-1024QAM-SubslotTA-1

Indicates whether the UE supports 1024QAM in DL on the band for subslot TTI operation with TA set 1.

–

dl-1024QAM-SubslotTA-2

Indicates whether the UE supports 1024QAM in DL on the band for subslot TTI operation with TA set 2, dmrsBasedSPDCCH-nonMBSFN

–

dl-DedicatedMessageSegmentation

Indicates whether the UE supports reception of segmented DL RRC messages.

–

dmrs-BasedSPDCCH-MBSFN

Indicates whether the UE supports sDCI monitoring in DMRS based SPDCCH for MBSFN subframe. If UE supports this, it also provides the corresponding DMRS based SPDCCH capability in min-Proc-TimelineSubslot.

Yes

dmrs-BasedSPDCCH-nonMBSFN

Indicates whether the UE supports sDCI monitoring in DMRS based SPDCCH for non-MBSFN subframe. If UE supports this, it also provides the corresponding DMRS based SPDCCH capability in min-Proc-TimelineSubslot.

Yes

dmrs-Enhancements (in MIMO-CA-ParametersPerBoBCPerTM)

If signalled, the field indicates for a particular transmission mode, that for the concerned band combination the DMRS enhancements are different than the value indicated by field dmrs-Enhancements in MIMO-UE-ParametersPerTM.

–

dmrs-Enhancements (in MIMO-UE-ParametersPerTM)

Indicates for a particular transmission mode whether the UE supports DMRS enhancements for the indicated transmission mode.

Yes

dmrs-LessUpPTS

Indicates whether the UE supports not to transmit DMRS for PUSCH in UpPTS.

No

dmrs-OverheadReduction

Indicates whether the UE supports OCC4 for rank 3 and 4 transmission as specified in clause 5.3.3.1.5C of TS 36.212 [22].

Yes

dmrs-PositionPattern

Indicates whether the UE supports uplink DMRS position pattern ‘D D D’ in subslot #5 with application of the 1/6 as the TBS scaling factor.

Yes

dmrs-RepetitionSubslotPDSCH

Indicates whether the UE supports back-to-back 3/4-layer DMRS reception in two consecutive subslots across subframe boundary for subslot-PDSCH.

Yes

dmrs-SharingSubslotPDSCH

Indicates whether the UE supports DMRS sharing in two consecutive subslots across subframe boundary for subslot-PDSCH.

Yes

dormantSCellState

Indicates whether UE supports Dormant SCell state (i.e. SCell state with CQI and RRM measurement reporting but no PDCCH monitoring).

–

downlinkLAA

Presence of the field indicates that the UE supports downlink LAA operation including identification of downlink transmissions on LAA cell(s) for full downlink subframes, decoding of common downlink control signalling on LAA cell(s), CSI feedback for LAA cell(s), RRM measurements on LAA cell(s) based on CRS-based DRS.

–

drb-TypeSCG

Indicates whether the UE supports SCG bearer.

–

drb-TypeSplit

Indicates whether the UE supports split bearer except for PDCP data transfer in UL.

–

dtm

Indicates whether the UE supports DTM in GERAN.

–

dummy

This field is not used in the specification. It shall not be sent by the UE.

–

earlyData-UP

Indicates whether the UE supports UP-EDT when connected to EPC.

–

earlyData-UP-5GC

Indicates whether the UE supports UP-EDT when connected to 5GC.

–

earlySecurityReactivation

Indicates whether the UE supports early security reactivation when resuming a suspended RRC connection.

–

e-CSFB-1XRTT

Indicates whether the UE supports enhanced CS fallback to CDMA2000 1xRTT or not.

Yes

e-CSFB-ConcPS-Mob1XRTT

Indicates whether the UE supports concurrent enhanced CS fallback to CDMA2000 1xRTT and PS handover/ redirection to CDMA2000 HRPD.

Yes

e-CSFB-dual-1XRTT

Indicates whether the UE supports enhanced CS fallback to CDMA2000 1xRTT for dual Rx/Tx configuration. This bit can only be set to supported if tx-Config1XRTT and rx-Config1XRTT are both set to dual.

Yes

e-HARQ-Pattern-FDD

Indicates whether the UE supports enhanced HARQ pattern for TTI bundling operation for FDD.

Yes

ehc

Indicates that the UE supports Ethernet header compression and decompression using EHC protocol, as specified in TS 36.323 [8] and in Annex A of TS 38.323 [83]. The UE indicating this capability and indicating support for at least one ROHC profile, shall support simultaneous configuration of EHC and ROHC on different DRBs.

No

eLCID-Support

Indicates whether the UE supports LCID "10000" and MAC PDU subheader containing the eLCID field as described in TS 36.321 [6].

–

emptyUnicastRegion

Indicates whether the UE supports unicast reception in subframes with empty unicast control region as described in TS 36.213 [23] clause 12. This field can be included only if unicast-fembmsMixedSCell and crossCarrierScheduling are included.

No

en-DC

Indicates whether the UE supports EN-DC.

–

endingDwPTS

Indicates whether the UE supports reception ending with a subframe occupied for a DwPTS-duration as described in TS 36.211 [21] and TS 36.213 [23]. This field can be included only if downlinkLAA is included.

–

Enhanced-4TxCodebook

Indicates whether the UE supports enhanced 4Tx codebook.

No

enhancedDualLayerTDD

Indicates whether the UE supports enhanced dual layer (PDSCH transmission mode 8) for TDD or not.

–

ePDCCH

Indicates whether the UE can receive DCI on UE specific search space on Enhanced PDCCH.

Yes

epdcch-SPT-differentCells

Indicates whether the UE supports EPDCCH and short processing time on different serving cells.

Yes

epdcch-STTI-differentCells

Indicates whether the UE supports EPDCCH and sTTI on different serving cells.

Yes

e-RedirectionUTRA

Yes

e-RedirectionUTRA-TDD

Indicates whether the UE supports enhanced redirection to UTRA TDD to multiple carrier frequencies both with and without using related SIB provided by RRCConnectionRelease or not.

Yes

etws-CMAS-RxInConnCE-ModeA, etws-CMAS-RxInConn

Indicates whether the UE operating in CE mode A/B supports reception of ETWS/CMAS indication in RRC_CONNECTED mode as specified in TS 36.212 [22].

–

eutra-5GC

Indicates whether the UE supports E-UTRA/5GC.

Yes

eutra-5GC-HO-ToNR-FDD-FR1

Indicates whether the UE supports handover from E-UTRA/5GC to NR FDD FR1.

Yes

eutra-5GC-HO-ToNR-TDD-FR1

Indicates whether the UE supports handover from E-UTRA/5GC to NR TDD FR1.

Yes

eutra-5GC-HO-ToNR-FDD-FR2

Indicates whether the UE supports handover from E-UTRA/5GC to NR FDD FR2.

Yes

eutra-5GC-HO-ToNR-TDD-FR2

Indicates whether the UE supports handover from E-UTRA/5GC to NR TDD FR2-1 as specified in TS 38.101-x [xx].

Yes

eutra-5GC-HO-ToNR-TDD-FR2-2

Indicates whether the UE supports handover from E-UTRA/5GC to NR TDD FR2-2 as specified in TS 38.101-x [xx].

–

eutra-CGI-Reporting-ENDC

Indicates whether the UE supports Intra-RAT report CGI procedure when it is configured with (NG) EN-DC wherein either MN and SN have different DRX cycles, or on-duration configured by MN does not contain on-duration configured by SN if their DRX cycles are same.

Yes

eutra-CGI-Reporting-NEDC

Indicates whether the UE supports acquisition of relevant information from a neighbouring E-UTRA cell by reading the SI of the neighbouring cell and reporting the acquired information to the network when the NE-DC is configured.

Yes

eutra-EPC-HO-ToNR-FDD-FR1

Indicates whether the UE supports handover from E-UTRA/EPC to NR FDD FR1.

Yes

eutra-EPC-HO-ToNR-TDD-FR1

Indicates whether the UE supports handover from E-UTRA/EPC to NR TDD FR1.

Yes

eutra-EPC-HO-ToNR-FDD-FR2

Indicates whether the UE supports handover from E-UTRA/EPC to NR FDD FR2.

Yes

eutra-EPC-HO-ToNR-TDD-FR2

Indicates whether the UE supports handover from E-UTRA/EPC to NR TDD FR2-1 as specified in TS 38.101-x [xx].

Yes

eutra-EPC-HO-ToNR-TDD-FR2-2

Indicates whether the UE supports handover from E-UTRA/EPC to NR TDD FR2-2 as specified in TS 38.101-x [xx].

–

eutra-EPC-HO-EUTRA-5GC

Indicates whether the UE supports handover between E-UTRA/EPC and E-UTRA/5GC.

Yes

eutra-IdleInactiveMeasurements

Indicates whether UE supports reporting measurements performed during RRC_IDLE or RRC_INACTIVE.

No

eutra-SI-AcquisitionForHO-ENDC

Indicates whether the UE supports, upon configuration of si-RequestForHO by the network, acquisition of relevant information from a neighbouring E-UTRA cell by reading the SI of the neighbouring cell using autonomous gaps and reporting the acquired information to the network.

Yes

eventB2

Indicates whether the UE supports event B2. A UE supporting NR SA operation shall set this bit to supported.

–

extendedBand-n77

This field is only applicable for UEs that indicate support for band n77. If present, the UE supports the restriction to 3450 – 3550 MHz and 3700 – 3980 MHz ranges of band n77 in the USA as specified in Note 12 of Table 5.2-1 in TS 38.101-1 [85]. If absent, the UE supports only restriction to the 3700 – 3980 MHz range of band n77 in the USA. A UE that indicates this field shall support NS value 55 as specified in TS 38.101-1 [85].

–

extendedBand-n77-2

This field is only applicable for UEs that indicate support for band n77. If present, the UE supports the restriction to 3450 – 3650 MHz and 3650 – 3980 ranges of band n77 in Canada as specified in Note 12 of Table 5.2-1 in TS 38.101-1 [85]. If absent, the UE supports only restriction to the 3450 – 3650 MHz range of band n77 in Canada. A UE that indicates this field shall also support NS value 57 as specified in TS 38.101-1 [85].

–

extendedFreqPriorities

Indicates whether the UE supports extended E-UTRA frequency priorities indicated by cellReselectionSubPriority field. A UE supporting NR SA operation shall set this bit to supported.

–

extendedLCID-Duplication

Indicates whether the UE supports use of extended LCIDs 32-38 for PDCP duplication.

–

extendedLongDRX

Indicates whether the UE supports extended long DRX cycle values of 5.12s and 10.24s in RRC_CONNECTED.

–

extendedMAC-LengthField

Indicates whether the UE supports the MAC header with L field of size 16 bits as specified in TS 36.321 [6], clause 6.2.1.

–

extendedMaxMeasId

Indicates whether the UE supports extended number of measurement identies as defined by maxMeasId-r12.

No

extendedMaxObjectId

Indicates whether the UE supports extended number of measurement object identies as defined by maxObjectId-r13.

No

extendedNumberOfDRBs

Indicates whether the UE supports up to 15 DRBs. The UE shall support any combination of RLC AM and RLC UM entities for the configured DRBs.

–

extendedPollByte

Indicates whether the UE supports extended pollByte values as defined by pollByte-r14.

–

extended-RLC-LI-Field

Indicates whether the UE supports 15 bit RLC length indicator.

–

extendedRLC-SN-SO-Field

Indicates whether the UE supports 16 bits of RLC sequence number and segmentation offset.

–

extendedRSRQ-LowerRange

Indicates whether the UE supports the extended RSRQ lower value range from -34dB to -19.5dB in measurement configuration and reporting as specified in TS 36.133 [16].

No

fdd-HARQ-TimingTDD

Indicates whether UE supports FDD HARQ timing for TDD SCell when configured with TDD PCell.

Yes

featureGroupIndicators, featureGroupIndRel9Add, featureGroupIndRel10

The definitions of the bits in the bit string are described in Annex B.1 (for featureGroupIndicators and featureGroupIndRel9Add) and in Annex C.1 (for featureGroupIndRel10).

Yes

featureSetsDL-PerCC

In MR-DC, indicates a set of features that the UE supports on one component carrier in a bandwidth class for a band in a given band combination. The UE shall hence include at least as many FeatureSetDL-PerCC-Id in this list as the number of carriers it supports according to the ca-bandwidthClassDL, except if indicating additional functionality by reducing the number of FeatureSetDownlinkPerCC-Id in the feature set. The order of the elements in this list is not relevant, i.e., the network may configure any of the carriers in accordance with any of the FeatureSetDL-PerCC-Id in this list.

–

FeatureSetDL-PerCC-Id

In MR-DC, indicates the index position of the FeatureSetDL-PerCC-r15 in the featureSetsDL-PerCC-r15 list. Value 0 corresponds to the first element in the list, value 1 corresponds to the second element in the list, and so on. Value 32 is not used.

–

featureSetsUL-PerCC

In MR-DC, indicates a set of features that the UE supports on one component carrier in a bandwidth class for a band in a given band combination. The UE shall hence include at least as many FeatureSetUL-PerCC-Id in this list as the number of carriers it supports according to the ca-bandwidthClassUL, except if indicating additional functionality by reducing the number of FeatureSetDownlinkPerCC-Id in the feature set. The order of the elements in this list is not relevant, i.e., the network may configure any of the carriers in accordance with any of the FeatureSetUL-PerCC-Id in this list.

–

FeatureSetUL-PerCC-Id

In MR-DC, indicates the index position of the FeatureSetUL-PerCC-r15 in the featureSetsUL-PerCC-r15 list. Value 0 corresponds to the first element in the list, value 1 corresponds to the second element in the list, and so on. Value 32 is not used.

–

fembmsMixedCell

Indicates whether the UE in RRC_CONNECTED supports MBMS reception with 15 kHz subcarrier spacings via MBSFN from FeMBMS/Unicast mixed cells on a frequency indicated in an MBMSInterestIndication message.

fembmsDedicatedCell

Indicates whether the UE in RRC_CONNECTED supports MBMS reception with 15 kHz subcarrier spacings via MBSFN from MBMS-dedicated cells on a frequency indicated in an MBMSInterestIndication message.

flexibleUM-AM-Combinations

Indicates whether the UE supports any combination of RLC UM and RLC AM bearers as long as the total number of bearers is at most 8, regardless of what FGI20 indicates.

–

flightPathPlan

Indicates whether UE supports reporting of flight path plan information.

–

fourLayerTM3-TM4

Indicates whether the UE supports 4-layer spatial multiplexing for TM3 and TM4.

–

fourLayerTM3-TM4 (in FeatureSetDL-PerCC)

Indicates whether the UE supports 4-layer spatial multiplexing for TM3 and TM4 for MR-DC within the indicated feature set. If this field is absent, UE supports two layer MIMO for TM3/TM4.

–

fourLayerTM3-TM4-perCC

Indicates whether the UE supports 4-layer spatial multiplexing for TM3 and TM4 for the component carrier.

–

frameStructureType-SPT

This field indicates the supported FS-type(s) for short processing time. The UE capability is reported per band combination. The reported FS-type(s) apply to the reported maxNumberCCs-SPT-r15 for the given band combination.

–

freqBandPriorityAdjustment

Indicates whether the UE supports the prioritization of frequency bands in multiBandInfoList over the band in freqBandIndicator as defined by freqBandIndicatorPriority-r12.

–

freqBandRetrieval

Indicates whether the UE supports reception of requestedFrequencyBands.

–

gNB-ID-Length-Reporting-NR-EN-DC

Indicates whether the UE supports Inter-RAT gNB ID length reporting towards NR cell when it is configured with (NG)EN-DC. If the UE supports reportCGI-NR-EN-DC-r15, the UE shall support the gNB-ID-Length-Reporting-NR-EN-DC-r17.

–

gNB-ID-Length-Reporting-NR-NoEN-DC

Indicates whether the UE supports Inter-RAT gNB ID length reporting towards cell when it is not configured with (NG)EN-DC. If the UE supports reportCGI-NR-NoEN-DC-r15, the UE shall support gNB-ID-Length-Reporting-NR-NoEN-DC-r17.

–

halfDuplex

If halfDuplex is set to true, only half duplex operation is supported for the band, otherwise full duplex operation is supported.

–

heightMeas

Indicates whether UE supports the measurement events H1/H2.

–

ho-EUTRA-5GC-FDD-TDD

Indicates whether the UE supports handover between E-UTRA/5GC FDD and E-UTRA/5GC TDD.

No

ho-InterfreqEUTRA-5GC

Indicates whether the UE supports inter frequency handover within E-UTRA/5GC.

Yes

hybridCSI

Indicates whether the UE supports hybrid CSI transmission as described in TS 36.213 [23].

Yes

idleInactiveValidityAreaList

Indicates whether the UE supports list of validity areas for measurements during RRC_IDLE and RRC_INACTIVE.

No

immMeasBT

Indicates whether the UE supports Bluetooth measurements in RRC connected mode.

–

immMeasUnComBarPre

Indicates whether the UE supports uncompensated barometric pressure measurements in RRC connected mode.

–

immMeasWLAN

Indicates whether the UE supports WLAN measurements in RRC connected mode.

–

ims-VoiceOverMCG-BearerEUTRA-5GC

Indicates whether the UE supports IMS voice over NR PDCP for MCG bearer for E-UTRA/5GC.

No

ims-VoiceOverNR-FR1

Indicates whether the UE supports IMS voice over NR FR1.

No

ims-VoiceOverNR-FR2

Indicates whether the UE supports IMS voice over NR FR2-1 as specified in TS 38.101-x [xx].

No

ims-VoiceOverNR-FR2-2

Indicates whether the UE supports IMS voice over NR FR2-2 as specified in TS 38.101-x [xx].

–

ims-VoiceOverNR-PDCP-MCG-Bearer

Indicates whether the UE supports IMS voice over NR PDCP with only MCG RLC bearer.

Yes

ims-VoiceOverNR-PDCP-SCG-Bearer

Indicates whether the UE supports IMS voice over NR PDCP with only SCG RLC bearer when configured with EN-DC.

Yes

ims-VoNR-PDCP-SCG-NGENDC

Indicates whether the UE supports IMS voice over NR PDCP with only SCG RLC bearer when configured with NGEN-DC.

Yes

inactiveState

Indicates whether the UE supports RRC_INACTIVE.

No

incMonEUTRA

Indicates whether the UE supports increased number of E-UTRA carrier monitoring in RRC_IDLE and RRC_CONNECTED, as specified in TS 36.133 [16].

No

incMonUTRA

Indicates whether the UE supports increased number of UTRA carrier monitoring in RRC_IDLE and RRC_CONNECTED, as specified in TS 36.133 [16].

No

inDeviceCoexInd

Indicates whether the UE supports in-device coexistence indication as well as autonomous denial functionality.

Yes

inDeviceCoexInd-ENDC

Indicates whether the UE supports in-device coexistence indication for (NG)EN-DC operation. This field can be included only if inDeviceCoexInd is included. The UE supports inDeviceCoexInd-ENDC in the same duplexing modes as it supports inDeviceCoexInd.

–

inDeviceCoexInd-HardwareSharingInd

Indicates whether the UE supports indicating hardware sharing problems when sending the InDeviceCoexIndication, as well as omitting the TDM assistance information. A UE that supports hardware sharing indication shall also indicate support of LAA operation.

–

inDeviceCoexInd-UL-CA

Indicates whether the UE supports UL CA related in-device coexistence indication. This field can be included only if inDeviceCoexInd is included. The UE supports inDeviceCoexInd-UL-CA in the same duplexing modes as it supports inDeviceCoexInd.

–

interBandTDD-CA-WithDifferentConfig

Indicates whether the UE supports inter-band TDD carrier aggregation with different UL/DL configuration combinations. The first bit indicates UE supports the configuration combination of SCell DL subframes are a subset of PCell and PSCell by SIB1 configuration and the configuration combination of SCell DL subframes are a superset of PCell and PSCell by SIB1 configuration; the second bit indicates UE supports the configuration combination of SCell DL subframes are neither superset nor subset of PCell and PSCell by SIB1 configuration. This field is included only if UE supports inter-band TDD carrier aggregation.

–

interBandPowerSharingAsyncDAPS

Indicates whether the UE supports power sharing for asynchronous inter-band DAPS handovers.

–

interBandPowerSharingSyncDAPS

Indicates whether the UE supports power sharing for synchronous inter-band DAPS handovers.

–

interferenceMeasRestriction

Indicates whether the UE supports interference measurement restriction.

Yes

interFreqAsyncDAPS

Indicates whether the UE supports asynchronous DAPS handover in source PCell and inter-frequency target PCell.

–

interFreqBandList

One entry corresponding to each supported E‑UTRA band listed in the same order as in supportedBandListEUTRA.

–

interFreqDAPS

Indicates whether the UE supports DAPS handover in source PCell and inter-frequency target PCell, i.e. support of simultaneous DL reception of PDCCH and PDSCH from source and target cell. For a BC, the capability applies to every carrier pair for source and target. A UE indicating this capability shall also support synchronous DAPS handover, and single UL transmission for inter-frequency DAPS handover.

–

interFreqMultiUL-TransmissionDAPS

Indicates that the UE supports simultaneous UL transmission in source PCell and inter-frequency target PCell.

–

interFreqNeedForGaps

Indicates need for measurement gaps when operating on the E‑UTRA band given by the entry in bandListEUTRA or on the E-UTRA band combination given by the entry in bandCombinationListEUTRA and measuring on the E‑UTRA band given by the entry in interFreqBandList.

–

interFreqProximityIndication

Indicates whether the UE supports proximity indication for inter-frequency E-UTRAN CSG member cells.

–

interFreqRSTD-Measurement

Indicates whether the UE supports inter-frequency RSTD measurements for OTDOA positioning, as specified in TS 36.355 [54].

Yes

interFreqSI-AcquisitionForHO

Indicates whether the UE supports, upon configuration of si-RequestForHO by the network, acquisition and reporting of relevant information using autonomous gaps by reading the SI from a neighbouring inter-frequency cell.

Yes

interRAT-BandList

One entry corresponding to each supported band of another RAT listed in the same order as in the interRAT-Parameters. The NR bands reported in SupportedBandListNR are excluded from this list.

–

interRAT-BandListNR-EN-DC

One entry corresponding to each supported NR band listed in the same order as in the supportedBandListEN-DC-r15. If both interRAT-BandListNR-EN-DC and interRAT-BandListNR-SA are included, the UE shall set the same interRAT-NeedForGapsNR value for the same NR band.

–

interRAT-BandListNR-SA

One entry corresponding to each supported NR band listed in the same order as in the supportedBandListNR-SA. If both interRAT-BandListNR-EN-DC and interRAT-BandListNR-SA are included, the UE shall set the same interRAT-NeedForGapsNR value for the same NR band.

–

interRAT-enhancementNR

Indicates whether the UE supports enhanced inter-RAT NR measurement requirements to support high speed up to 500 km/h as specified in TS 36.133 [16], when EN-DC is not configured and when EN-DC is configured.

–

interRAT-NeedForGaps

Indicates need for DL measurement gaps when operating on the E‑UTRA band given by the entry in bandListEUTRA or on the E-UTRA band combination given by the entry in bandCombinationListEUTRA and measuring on the inter-RAT band given by the entry in the interRAT-BandList.

–

interRAT-NeedForGapsNR

Indicates need for measurement gaps when operating on the E‑UTRA band given by the entry in supportedBandListEUTRA or on the E-UTRA band combination given by the entry in supportedBandCombination-r10 or supportedBandCombinationAdd-r11 or supportedBandCombinationReduced-r13 and measuring on the NR band given by the entry in the InterRAT-BandListNR.

–

interRAT-ParametersWLAN

Indicates whether the UE supports WLAN measurements configured by MeasObjectWLAN with corresponding quantity and report configuration in the supported WLAN bands.

–

interRAT-PS-HO-ToGERAN

Indicates whether the UE supports inter-RAT PS handover to GERAN or not.

Yes

intraBandContiguousCC-InfoList

Indicates, per serving carrier of which the corresponding bandwidth class includes multiple serving carriers (i.e. bandwidth class B, C, D and so on), the maximum number of supported layers for spatial multiplexing in DL and the maximum number of CSI processes supported. The number of entries is equal to the number of component carriers in the corresponding bandwidth class. The UE shall support the setting indicated in each entry of the list regardless of the order of entries in the list.The UE shall include the field only if it supports 4-layer spatial multiplexing in transmission mode3/4 for a subset of component carriers in the corresponding bandwidth class, or if the maximum number of supported layers for at least one component carrier is higher than supportedMIMO-CapabilityDL-r10 in the corresponding bandwidth class, or if the number of CSI processes for at least one component carrier is higher than supportedCSI-Proc-r11 in the corresponding band.

This field may also be included for bandwidth class A but in such a case without including any sub-fields in IntraBandContiguousCC-Info-r12 (see NOTE 6).

–

intraFreqA3-CE-ModeA

Indicates whether the UE when operating in CE Mode A supports eventA3 for intra-frequency neighbouring cells.

–

intraFreqA3-CE-ModeB

Indicates whether the UE when operating in CE Mode B supports eventA3 for intra-frequency neighbouring cells.

–

intraFreq-CE-NeedForGaps

Indicates need for measurement gaps when operating in CE on the E‑UTRA band given by the entry in supportedBandListEUTRA.

intraFreqAsyncDAPS

Indicates whether the UE supports asynchronous DAPS handover in source PCell and intra-frequency target PCell.

–

intraFreqDAPS

Indicates whether UE supports DAPS handover in source PCell and intra-frequency target PCell, i.e. support of simultaneous DL reception of PDCCH and PDSCH from source and target cell. A UE indicating this capability shall also support synchronous DAPS handover, and single UL transmission for intra-frequency DAPS handover.

–

intraFreqHO-CE-ModeA

Indicates whether the UE when operating in CE Mode A supports intra-frequency handover.

–

intraFreqHO-CE-ModeB

Indicates whether the UE when operating in CE Mode B supports intra-frequency handover.

–

intraFreqProximityIndication

Indicates whether the UE supports proximity indication for intra-frequency E-UTRAN CSG member cells.

–

intraFreqSI-AcquisitionForHO

Indicates whether the UE supports, upon configuration of si-RequestForHO by the network, acquisition and reporting of relevant information using autonomous gaps by reading the SI from a neighbouring intra-frequency cell.

Yes

intraFreqTwoTAGs-DAPS

Indicates whether the UE supports different timing advance groups in source PCell and intra-frequency target PCell. It is mandatory for intraFreqDAPS capable UE.

–

jointEHC-ROHC-Config

Indicates whether the UE supports simultaneous configuration of EHC and ROHC protocols for the same DRB.

No

k-Max (in MIMO-CA-ParametersPerBoBCPerTM)

If signalled, the field indicates for a particular transmission mode the maximum number of NZP CSI RS resource configurations supported within a CSI process applicable for the concerned band combination.

No

k-Max (in MIMO-UE-ParametersPerTM)

Indicates for a particular transmission mode the maximum number of NZP CSI RS resource configurations supported within a CSI process applicable for band combinations for which the concerned capabilities are not signalled.

Yes

laa-PUSCH-Mode1

Indicates whether the UE supports LAA PUSCH mode 1 as defined in TS 36.213 [23].

–

laa-PUSCH-Mode2

Indicates whether the UE supports LAA PUSCH mode 2 as defined in TS 36.213 [23].

–

laa-PUSCH-Mode3

Indicates whether the UE supports LAA PUSCH mode 3 as defined in TS 36.213 [23].

–

locationReport

Indicates whether the UE supports reporting of its geographical location information to eNB.

–

loggedMBSFNMeasurements

Indicates whether the UE supports logged measurements for MBSFN. A UE indicating support for logged measurements for MBSFN shall also indicate support for logged measurements in Idle mode.

–

loggedMeasBT

Indicates whether the UE supports Bluetooth measurements in RRC idle mode.

–

loggedMeasIdleEventL1

Indicates whether the UE supports event triggered logged measurements for eventL1 in camped normally state.

–

loggedMeasIdleEventOutOfCoverage

Indicates whether the UE supports event triggered logged measurements for outOfCoverage in any cell selection state.

–

loggedMeasUnComBarPre

Indicates whether the UE supports uncompensated barometric pressure measurements in RRC_IDLE mode.

–

loggedMeasurementsIdle

Indicates whether the UE supports logged measurements in Idle mode.

–

loggedMeasWLAN

Indicates whether the UE supports WLAN measurements in RRC idle mode.

–

logicalChannelSR-ProhibitTimer

Indicates whether the UE supports the logicalChannelSR-ProhibitTimer as defined in TS 36.321 [6].

–

longDRX-Command

Indicates whether the UE supports Long DRX Command MAC Control Element.

–

lwa

Indicates whether the UE supports LTE-WLAN Aggregation (LWA). The UE which supports LWA shall also indicate support of interRAT-ParametersWLAN-r13.

–

lwa-BufferSize

Indicates whether the UE supports the layer 2 buffer sizes for "with support for split bearers" as defined in Table 4.1-3 and 4.1A-3 of TS 36.306 [5] for LWA.

–

lwa-HO-WithoutWT-Change

Indicates whether the UE supports handover where LWA configuration is retained without WT change and using LWA end-marker for PDCP key change indication for LWA operation.

–

lwa-RLC-UM

Indicates whether the UE supports RLC UM for LWA bearer.

–

lwa-SplitBearer

Indicates whether the UE supports the split LWA bearer (as defined in TS 36.300 [9]).

–

lwa-UL

Indicates whether the UE supports UL transmission over WLAN for LWA bearer.

–

lwip

Indicates whether the UE supports LTE/WLAN Radio Level Integration with IPsec Tunnel (LWIP). The UE which supports LWIP shall also indicate support of interRAT-ParametersWLAN-r13.

–

lwip-Aggregation-DL, lwip-Aggregation-UL

Indicates whether the UE supports aggregation of LTE and WLAN over DL/UL LWIP. The UE that indicates support of LWIP aggregation over DL or UL shall also indicate support of lwip.

–

makeBeforeBreak

Indicates whether the UE supports intra-frequency Make-Before-Break handover, and whether the UE which indicates dc-Parameters supports intra-frequency Make-Before-Break SeNB change, as defined in TS 36.300 [9].

–

measGapPatterns-NRonly

Indicates whether the UE supports gap patterns 2, 3 and 11 in LTE standalone when the frequencies to be measured within this measurement gap are all NR frequencies.

No

measGapPatterns-NRonly-ENDC

Indicates whether the UE supports gap patterns 2, 3 and 11 in (NG)EN-DC when the frequencies to be measured within this measurement gap are all NR frequencies.

No

maximumCCsRetrieval

Indicates whether UE supports reception of requestedMaxCCsDL and requestedMaxCCsUL.

–

maxLayersMIMO-Indication

Indicates whether the UE supports the network configuration of maxLayersMIMO. If the UE supports fourLayerTM3-TM4 or intraBandContiguousCC-InfoList or FeatureSetDL-PerCC for MR-DC, UE supports the configuration of maxLayersMIMO for these cases regardless of indicating maxLayersMIMO-Indication.

–

maxLayersSlotOrSubslotPUSCH

Indicates the maxiumum number of layers for slot-PUSCH or subslot-PUSCH transmission.

Yes

maxNumberCCs-SPT

Indicates the maximum number of supported CCs for short processing time. The UE capability is reported per band combination. The reported number of carriers applies to all the FS-type(s) frameStructureType-SPT-r15 supported in a given band combination. Absence of the field indicates that 0 number of CCs are supported for short processing time.

–

maxNumberDL-CCs, maxNumberUL-CCs

Indicates for each TTI combination "sTTI-SupportedCombinations", the maximum number of supported DL CCs/UL CCs for short TTI. Absence of the field indicates that 0 number of CCs are supported for short TTI.

–

maxNumberDecoding

Indicates the maximum number of blind decodes in UE-specific search space per UE in one subframe for CA with more than 5 CCs as defined in TS 36.213 [23] which is supported by the UE. The number of blind decodes supported by the UE is the field value * 32. Only values 5 to 32 can be used in this version of the specification.

No

maxNumberEHC-Contexts

Defines the maximum number of Ethernet header compression contexts supported by the UE across all DRBs and across UE’s EHC compressor and EHC decompressor. The indicated number defines the number of contexts in addition to CID = "all zeros" as specified in Annex A of TS 38.323 [83].

No

maxNumberROHC-ContextSessions

Set to the maximum number of concurrently active ROHC contexts supported by the UE, excluding context sessions that leave all headers uncompressed. cs2 corresponds with 2 (context sessions), cs4 corresponds with 4 and so on. The network ignores this field if the UE supports none of the ROHC profiles in supportedROHC-Profiles. If the UE indicates both maxNumberROHC-ContextSessions and maxNumberROHC-ContextSessions-r14, same value shall be indicated.

–

maxNumberUpdatedCSI-Proc, maxNumberUpdatedCSI-Proc-SPT

Indicates the maximum number of CSI processes to be updated across CCs.

No

maxNumberUpdatedCSI-Proc-STTI-Comb77, maxNumberUpdatedCSI-Proc-STTI-Comb27, maxNumberUpdatedCSI-Proc-STTI-Comb22-Set1, maxNumberUpdatedCSI-Proc-STTI-Comb22-Set2

Indicates the maximum number of CSI processes to be updated across CCs. Comb77 is applicable for {slot, slot}, Comb27 for {subslot, slot}, Comb22-Set1 for

{subslot, subslot} processing timeline set 1 and the Comb22-Set2 for {subslot, subslot} processing timeline set 2.

mbms-AsyncDC

Indicates whether the UE in RRC_CONNECTED supports MBMS reception via MRB on a frequency indicated in an MBMSInterestIndication message, where (according to supportedBandCombination) the carriers that are or can be configured as serving cells in the MCG and the SCG are not synchronized. If this field is included, the UE shall also include mbms-SCell and mbms-NonServingCell. The field indicates that the UE supports the feature for xDD if mbms-SCell and mbms-NonServingCell are supported for xDD.

–

mbms-MaxBW

Indicates maximum supported bandwidth (T) for MBMS reception, see TS 36.213 [23]. clause 11.1. If the value is set to implicitValue, the corresponding value of T is calculated as specified in TS 36.213 [23], clause 11.1. If the value is set to explicitValue, the actual value of T = explicitValue * 40 MHz.

–

mbms-NonServingCell

Indicates whether the UE in RRC_CONNECTED supports MBMS reception via MRB on a frequency indicated in an MBMSInterestIndication message, where (according to supportedBandCombination and to network synchronization properties) a serving cell may be additionally configured. If this field is included, the UE shall also include the mbms-SCell field.

Yes

mbms-ScalingFactor1dot25, mbms-ScalingFactor7dot5

Indicates parameter A^(1.25 / A^(7.5, i.e., scaling factor for processing one unit of bandwidth corresponding to subcarrier spacing of 1.25 kHz / 7.5 kHz, with respect to one unit of bandwidth corresponding to subcarrier spacing of 15 kHz. See TS 36.213 [23], clause 11.1. This field is included only if subcarrierSpacingMBMS-khz1dot25 / subcarrierSpacingMBMS-khz7dot5 is included. This field shall be included if mbms-MaxBW and subcarrierSpacingMBMS-khz1dot25 / subcarrierSpacingMBMS-khz7dot5 are included.

–

mbms-ScalingFactor0dot37, mbms-ScalingFactor2dot5

Indicates parameter A^(0.37 / A^(2..5, i.e., scaling factor for processing one unit of bandwidth corresponding to subcarrier spacing of 0.37 kHz / 2.5 kHz, with respect to one unit of bandwidth corresponding to subcarrier spacing of 15 kHz. See TS 36.213 [23], clause 11.1. This field is included only if fembmsMixedCell or fembmsDedicatedCell is included. This field shall be included if subcarrierSpacingMBMS-khz0dot37 / subcarrierSpacingMBMS-khz2dot5 is included for at least one E-UTRA band in mbms-SupportedBandInfoList.

–

mbms-SCell

Indicates whether the UE in RRC_CONNECTED supports MBMS reception via MRB on a frequency indicated in an MBMSInterestIndication message, when an SCell is configured on that frequency (regardless of whether the SCell is activated or deactivated).

Yes

mbms-SupportedBandInfoList

One entry corresponding to each supported E-UTRA band listed in the same order as in supportedBandListEUTRA. This list is included only if fembmsMixedCell or fembmsDedicatedCell is included. If mbms-SupportedBandInfoList-v1700 is included, the UE shall include the same number of entries, and listed in the same order, as in mbms-SupportedBandInfoList-r16.

–

mcgRLF-RecoveryViaSCG

Indicates whether the UE supports recovery from MCG RLF via split SRB1 (if supported) and via SRB3 (if supported).

–

measGapPatterns-NRonly

Indicates whether the UE supports gap patterns 2, 3 and 11 in LTE standalone when the frequencies to be measured within this measurement gap are all NR frequencies.

No

measGapPatterns-NRonly-ENDC

Indicates whether the UE supports gap patterns 2, 3 and 11 in (NG)EN-DC when the frequencies to be measured within this measurement gap are all NR frequencies.

No

measurementEnhancements

This field defines whether UE supports measurement enhancements in high speed scenario (350 km/h) as specified in TS 36.133 [16].

–

measurementEnhancements2

This field defines whether UE supports measurement enhancements in high speed scenario (up to 500 km/h velocity) as specified in TS 36.133 [16].

–

measurementEnhancementsSCell

This field defines whether UE supports SCell measurement enhancements in high speed scenario (350 km/h) as specified in TS 36.133 [16].

–

measGapPatterns

Indicates whether the UE that supports NR supports gap patterns 4 to 11 in LTE standalone as specified in TS 36.133 [16], and for independent measurement gap configuration on FR1 and per-UE gap in (NG)EN-DC as specified in TS 38.133 [84]. The first/ leftmost bit covers pattern 4, and so on. Value 1 indicates that the UE supports the concerned gap pattern.

–

mfbi-UTRA

It indicates if the UE supports the signalling requirements of multiple radio frequency bands in a UTRA FDD cell, as defined in TS 25.307 [65].

–

MIMO-BeamformedCapabilityList

A list of pairs of {k-Max, n-MaxList} values with the n^th entry indicating the values that the UE supports for each CSI process in case n CSI processes would be configured.

No

MIMO-CapabilityDL

The number of supported layers for spatial multiplexing in DL. The field may be absent for category 0 and category 1 UE in which case the number of supported layers is 1.

–

MIMO-CapabilityUL

The number of supported layers for spatial multiplexing in UL. Absence of the field means that the number of supported layers is 1.

–

MIMO-CA-ParametersPerBoBC

A set of MIMO parameters provided per band of a band combination. In case a subfield is absent, the concerned capabilities are the same as indicated at the per UE level (i.e. by MIMO-UE-ParametersPerTM).

–

mimo-CBSR-AdvancedCSI

Indicates whether UE supports CBSR for advanced CSI reporting with and without amplitude restriction as defined in TS 36.213 [23], clause 7.2.

Yes

min-Proc-TimelineSubslot

Minimum processing timeline for subslot operation. The minimum processing timeline can belong to one of two sets of associated processing and maximum TA operation. The sets supported can be different for 1os CRS-based SPDCCH, 2os CRS-based SPDCCH and DMRS-based SPDCCH. The sequence applies to:

1. 1os CRS based SPDCCH

2. 2os CRS based SPDCCH

3. DMRS based SPDCCH

–

modifiedMPR-Behavior

Field encoded as a bit map, where at least one bit N is set to "1" if UE supports modified MPR/A-MPR behaviour N, see TS 36.101 [42]. All remaining bits of the field are set to "0". The leading / leftmost bit (bit 0) corresponds to modified MPR/A-MPR behaviour 0, the next bit corresponds to modified MPR/A-MPR behaviour 1 and so on.

Absence of this field means that UE does not support any modified MPR/A-MPR behaviour.

–

mpdcch-InLteControlRegionCE-ModeA, mpdcch-InLteControlRegionCE-ModeB

Indicates whether UE operating in CE mode A/B supports MPDCCH reception in LTE control channel region as specified in TS 36.211 [21].

Yes

mpsPriorityIndication

Indicates whether the UE supports mpsPriorityIndication on release with redirect.

–

multiACK-CSI-reporting

Indicates whether the UE supports multi-cell HARQ ACK and periodic CSI reporting and SR on PUCCH format 3.

Yes

multiBandInfoReport

Indicates whether the UE supports the acquisition and reporting of multi band information for reportCGI.

–

multiClusterPUSCH-WithinCC

Yes

multiNS-Pmax

Indicates whether the UE supports the mechanisms defined for cells broadcasting NS-PmaxList.

–

multipleCellsMeasExtension

Indicates whether the UE supports numberOfTriggeringCells in the report configuration.

–

multipleTimingAdvance

Indicates whether the UE supports multiple timing advances for each band combination listed in supportedBandCombination. If the band combination comprised of more than one band entry (i.e., inter-band or intra-band non-contiguous band combination), the field indicates that the same or different timing advances on different band entries are supported. If the band combination comprised of one band entry (i.e., intra-band contiguous band combination), the field indicates that the same or different timing advances across component carriers of the band entry are supported. It is mandatory for UEs to support 2 TAGs for inter frequency DAPS handover.

–

multipleUplinkSPS

Indicates whether the UE supports multiple uplink SPS and reporting SPS assistance information. A UE indicating multipleUplinkSPS shall also support V2X communication via Uu, as defined in TS 36.300 [9].

–

must-CapabilityPerBand

Indicates that UE supports MUST, as specified in 36.212 [22], clause 5.3.3.1, on the band in the band combination.

–

must-TM234-UpTo2Tx-r14

Indicates that the UE supports MUST operation for TM2/3/4 using up to 2Tx.

–

must-TM89-UpToOneInterferingLayer-r14

Indicates that the UE supports MUST operation for TM8/9 with assistance information for up to 1 interfering layer.

–

must-TM89-UpToThreeInterferingLayers-r14

Indicates that the UE supports MUST operation for TM8/9 with assistance information for up to 3 interfering layers.

–

must-TM10-UpToOneInterferingLayer-r14

Indicates that the UE supports MUST operation for TM10 with assistance information for up to 1 interfering layer.

–

must-TM10-UpToThreeInterferingLayers-r14

Indicates that the UE supports MUST operation for TM10 with assistance information for up to 3 interfering layers.

–

naics-Capability-List

Indicates that UE supports NAICS, i.e. receiving assistance information from serving cell and using it to cancel or suppress interference of neighbouring cell(s) for at least one band combination. If not present, UE does not support NAICS for any band combination. The field numberOfNAICS-CapableCC indicates the number of component carriers where the NAICS processing is supported and the field numberOfAggregatedPRB indicates the maximum aggregated bandwidth across these of component carriers (expressed as a number of PRBs) with the restriction that NAICS is only supported over the full carrier bandwidth. The UE shall indicate the combination of {numberOfNAICS-CapableCC, numberOfNAICS-CapableCC} for every supported numberOfNAICS-CapableCC, e.g. if a UE supports {x CC, y PRBs} and {x-n CC, y-m PRBs} where n>=1 and m>=0, the UE shall indicate both.

– For numberOfNAICS-CapableCC = 1, UE signals one value for numberOfAggregatedPRB from the range {50, 75, 100};

– For numberOfNAICS-CapableCC = 2, UE signals one value for numberOfAggregatedPRB from the range {50, 75, 100, 125, 150, 175, 200};

– For numberOfNAICS-CapableCC = 3, UE signals one value for numberOfAggregatedPRB from the range {50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300};

– For numberOfNAICS-CapableCC = 4, UE signals one value for numberOfAggregatedPRB from the range {50, 100, 150, 200, 250, 300, 350, 400};

– For numberOfNAICS-CapableCC = 5, UE signals one value for numberOfAggregatedPRB from the range {50, 100, 150, 200, 250, 300, 350, 400, 450, 500}.

No

ncsg

Indicates whether the UE supports measurement NCSG Pattern Id 0, 1, 2 and 3, as specified in TS 36.133 [16]. If this field is included and the UE supports asynchronous DC, the UE shall support NCSG Pattern Id 0, 1, 2 and 3. If this field is included but the UE does not support asynchronous DC, only NCSG Pattern Id 0 and 1 shall be supported

No

ng-EN-DC

Indicates whether the UE supports NGEN-DC.

–

n-MaxList (in MIMO-UE-ParametersPerTM)

Indicates for a particular transmission mode the maximum number of NZP CSI RS ports supported within a CSI process applicable for band combinations for which the concerned capabilities are not signalled. For k-Max values exceeding 1, the UE shall include the field and signal k-Max minus 1 bits. The first bit indicates n-Max2, with value 0 indicating 8 and value 1 indicating 16. The second bit indicates n-Max3, with value 0 indicating 8 and value 1 indicating 16. The third bit indicates n-Max4, with value 0 indicating 8 and value 1 indicating 32. The fourth bit indicates n-Max5, with value 0 indicating 16 and value 1 indicating 32. The fifth bit indicates n-Max6, with value 0 indicating 16 and value 1 indicating 32. The sixt bit indicates n-Max7, with value 0 indicating 16 and value 1 indicating 32. The seventh bit indicates n-Max8, with value 0 indicating 16 and value 1 indicating 64.

Yes

n-MaxList (in MIMO-CA-ParametersPerBoBCPerTM)

If signalled, the field indicates for a particular transmission mode the maximum number of NZP CSI RS ports supported within a CSI process applicable for band the concerned combination. Further details are as indicated for n-MaxList in MIMO-UE-ParametersPerTM.

No

NonContiguousUL-RA-WithinCC-List

One entry corresponding to each supported E-UTRA band listed in the same order as in supportedBandListEUTRA.

No

nonPrecoded (in MIMO-UE-ParametersPerTM)

Indicates for a particular transmission mode the UE capabilities concerning non-precoded EBF/ FD-MIMO operation (class A) for band combinations for which the concerned capabilities are not signalled in MIMO-CA-ParametersPerBoBCPerTM, and the FD-MIMO processing capability condition as described in NOTE 8 is satisfied.

Yes

nonPrecoded (in MIMO-CA-ParametersPerBoBCPerTM)

If signalled, the field indicates for a particular transmission mode, the UE capabilities concerning non-precoded EBF/ FD-MIMO operation (class A) applicable for the concerned band combination.

–

nonUniformGap

Indicates whether the UE supports measurement non uniform Pattern Id 1, 2, 3 and 4 in LTE standalone as specified in TS 36.133 [16].

No

noResourceRestrictionForTTIBundling

Indicate whether the UE supports TTI bundling operation without resource allocation restriction.

No

nonCSG-SI-Reporting

Indicates whether UE will report PLMN list from non-CSG cells.

–

nr-AutonomousGaps-ENDC-FR1

Indicates whether the UE supports, upon configuration of useAutonomousGapsNR by the network, acquisition of relevant information from a neighbouring NR cell by reading the SI of the neighbouring cell on FR1 using autonomous gaps and reporting the acquired information to the network when it is configured with (NG)EN-DC.

Yes

nr-AutonomousGaps-ENDC-FR2

Indicates whether the UE supports, upon configuration of useAutonomousGapsNR by the network, acquisition of relevant information from a neighbouring NR cell by reading the SI of the neighbouring cell on FR2 using autonomous gaps and reporting the acquired information to the network when it is configured with (NG)EN-DC.

Yes

nr-AutonomousGaps-FR1

Indicates whether the UE supports, upon configuration of useAutonomousGapsNR by the network, acquisition of relevant information from a neighbouring NR cell by reading the SI of the neighbouring cell on FR1 using autonomous gaps and reporting the acquired information to the network when it is not configured with (NG)EN-DC.

Yes

nr-AutonomousGaps-FR2

Indicates whether the UE supports, upon configuration of useAutonomousGapsNR by the network, acquisition of relevant information from a neighbouring NR cell by reading the SI of the neighbouring cell on FR2 using autonomous gaps and reporting the acquired information to the network when it is not configured with (NG)EN-DC.

Yes

nr-HO-ToEN-DC

Indicates whether the UE supports inter-RAT handover from NR to EN-DC while NR-DC or NE-DC is not configured. This field is mandatory present if EN-DC is supported.

–

nr-IdleInactiveBeamMeasFR1

Indicates whether the UE supports performing eNB-configured SSB-based beam level RRM measurements for configured NR FR1 carrier(s) in RRC_IDLE and in RRC_INACTIVE as specified in TS 36.306 [5], clause 4.3.6.46.

No

nr-IdleInactiveBeamMeasFR2

Indicates whether the UE supports performing eNB-configured SSB-based beam level RRM measurements for configured NR FR2 carrier(s) in RRC_IDLE and in RRC_INACTIVE as specified in TS 36.306 [5], clause 4.3.6.47.

No

nr-IdleInactiveMeasFR1

Indicates whether UE supports reporting measurements performed on NR FR1 carrier(s) during RRC_IDLE and RRC_INACTIVE.

No

nr-IdleInactiveMeasFR2

Indicates whether UE supports reporting measurements performed on NR FR2 carrier(s) during RRC_IDLE and RRC_INACTIVE.

No

nr-RSSI-ChannelOccupancyReporting

Indicates whether the UE supports performing measurements and reporting of RSSI and channel occupancy on the corresponding NR band.

–

ntn-Connectivity-EPC

Indicates whether the UE supports NTN access when connected to EPC. If the UE indicates this capability, the UE shall support all NTN essential features as specified in TS 36.306 [5].

–

ntn-OffsetTimingEnh

Indicates whether the UE supports timing relationship enhancement using Koffset as specified in TS36.321 [6] and TS 36.213 [23].

–

ntn-PUR-TimerDelay

Indicates whether the UE supports delaying the start of the pur-ResponseWindowTimer for NTN, see TS 36.321 [6].

–

ntn-SegmentedPrecompensationGaps

Indicates the minumum supported gap length between segments for segmented uplink transmission. Value sym1 corresponds to 1 symbol, value sl1 corresponds to 1 slot, value sf1 corresponds to 1 subframe.

–

ntn-ScenarioSupport

Indicates whether the UE supports NTN features only for GSO or NGSO scenario.

–

ntn-TA-report

Indicates whether the UE supports timing advance reporting in RRC_CONNECTED, see TS 36.321 [6].

–

numberOfBlindDecodesUSS

Indicates the maximum number of blind decodes in UE specific search space in one subframe for CCs configured with sTTI operation supported by the UE. The number of blind decodes supported by the UE is the field value X*68. Field value ranges from 4 to 32.

Yes

nzp-CSI-RS-AperiodicInfo

Indicates whether the UE supports aperiodic NZP CSI-RS transmission for the indicated transmission mode.

Yes

nzp-CSI-RS-PeriodicInfo

Indicates whether the UE supports periodic NZP CSI-RS transmission for the indicated transmission mode.

Yes

otdoa-UE-Assisted

Indicates whether the UE supports UE-assisted OTDOA positioning, as specified in TS 36.355 [54].

Yes

outOfOrderDelivery

Same as "outOfOrderDelivery" defined in TS 38.306 [87].

No

outOfSequenceGrantHandling

Indicates whether the UE supports PUSCH transmissions with out of sequence UL grants as defined in TS 36.213 [23]. This field can be included only if uplinkLAA is included.

–

overheatingInd

Indicates whether the UE supports overheating assistance information.

No

overheatingIndForSCG

Indicates whether the UE supports the inclusion of NR SCG reduced configuration in the overheating assistance information. The UE which indicates support of overheatingIndForSCG shall also indicate support of overheatingInd.

–

pdcch-CandidateReductions

Indicates whether the UE supports PDCCH candidate reduction on UE specific search space as specified in TS 36.213 [23], clause 9.1.1.

No

pdcp-Duplication

Indicates whether the UE supports PDCP duplication.

–

pdcp-SN-Extension

Indicates whether the UE supports 15 bit length of PDCP sequence number.

–

pdcp-SN-Extension-18bits

Indicates whether the UE supports 18 bit length of PDCP sequence number.

–

pdcp-TransferSplitUL

Indicates whether the UE supports PDCP data transfer split in UL for the drb-TypeSplit as specified in TS 36.323 [8].

–

pdcp-VersionChangeWithoutHO

Indicates whether, the UE supports changing the PDCP version of DRBs, from LTE PDCP to NR PDCP and vice versa, with and without handover. A UE supporting PDCP version change shall signal field pdcp-Parameters-v1610. When the field pdcp-VersionChangeWithoutHO is not included and pdcp-Parameters-v1610 is included, it implies the UE supports PDCP version change only with handover.

–

pdsch-CollisionHandling

Indicates whether the UE supports PDSCH collision handling as specified in TS 36.213 [23].

No

pdsch-InLteControlRegionCE-ModeA, pdsch-InLteControlRegionCE-ModeB

Indicates whether UE operating in CE mode A/B supports PDSCH reception in LTE control channel region as specified in TS 36.211 [21].

Yes

pdsch-MultiTB-CE-ModeA, pdsch-MultiTB-CE-ModeB

Indicates whether the UE supports multiple TB scheduling in connected mode for PDSCH when operating in CE mode A/B, as specified in TS 36.211 [21] and TS 36.213 [23].

Yes

pdsch-RepSubframe

Indicates whether the UE supports subframe PDSCH repetition.

Yes

pdsch-RepSlot

Indicates whether the UE supports slot PDSCH repetition.

Yes

pdsch-RepSubslot

Indicates whether the UE supports subslot PDSCH repetition. This field is only applicable for UEs supporting FDD.

–

pdsch-SlotSubslotPDSCH-Decoding

Indicates whether the UE supports decoding of PDSCH and slot-PDSCH/subslot-PDSCH assigned with C-RNTI/SPS C-RNTI in the same subframe for a given carrier.

Yes

perServingCellMeasurementGap

Indicates whether the UE supports per serving cell measurement gap indication, as specified in TS 36.133 [16].

–

phy-TDD-ReConfig-FDD-PCell

Indicates whether the UE supports TDD UL/DL reconfiguration for TDD serving cell(s) via monitoring PDCCH with eIMTA-RNTI on a FDD PCell, and HARQ feedback according to UL and DL HARQ reference configurations. This bit can only be set to supported only if the UE supports FDD PCell and phy-TDD-ReConfig-TDD-PCell is set to supported.

No

phy-TDD-ReConfig-TDD-PCell

Indicates whether the UE supports TDD UL/DL reconfiguration for TDD serving cell(s) via monitoring PDCCH with eIMTA-RNTI on a TDD PCell, and HARQ feedback according to UL and DL HARQ reference configurations, and PUCCH format 3.

Yes

pmch-Bandwidth-n40, pmch-Bandwidth-n35, pmch-Bandwidth-n30

Indicates, for the E‑UTRA band corresponding to the entry in mbms-SupportedBandInfoList-v1700, whether the UE in RRC_CONNECTED supports MBMS reception via MBSFN from MBMS-dedicated cells in an MBSFN area with PMCH bandwidth of 40/ 35/ 30 PRBs as described in TS 36.211 [21] and TS 36.213 [23].

–

pmi-Disabling

Yes

powerClass-14dBm

Indicates whether the UE supports power class 14 dBm when operating in CE mode A or B for all the bands that are supported by the UE, as specified in TS 36.101 [42].

–

powerPrefInd

Indicates whether the UE supports power preference indication.

No

powerUCI-SlotPUSCH, powerUCI-SubslotPUSCH

Indicates whether the UE supports BPRE derivation based on the actual derived O_CQI. The parameter uplinkPower-CSIPayload configures the UE to derive BPRE based on either the actual value of O_CQI or the largest value of O_CQI across all RI values. If the UE does not support the capability, the UE will derive BPRE based on the largest value of O_CQI across all RI values.

Yes

prach-Enhancements

This field defines whether the UE supports random access preambles generated from restricted set type B in high speed scenoario as specified in TS 36.211 [21].

–

processingTimelineSet

Indicates, for each SPDCCH configuration, support for a set of TA values. Each set consists of two different processing timelines and associated maximum TA. Set 1 indicates support for n+4 and n+6 and set 2 indicates support for n+6 and n+8, see TS 36.211 [21], clause 8.1, The minimum processing timeline to use, out of the two options for a given set is configured by parameter proc-Timeline. Support of Set 1 implicitly means support of Set 2.

–

pucch-Format4

Indicates whether the UE supports PUCCH format 4.

Yes

pucch-Format5

Indicates whether the UE supports PUCCH format 5.

Yes

pucch-SCell

Indicates whether the UE supports PUCCH on SCell.

No

pur-CP-EPC-CE-ModeA, pur-CP-EPC-CE-ModeB, pur-CP-5GC-CE-ModeA, pur-CP-5GC-CE-ModeB

Indicates whether UE operating in CE mode A/B supports CP transmission using PUR when connected to EPC/ 5GC.

Yes

pur-CP-L1Ack

Indicates whether UE supports L1 acknowledgement in response to CP transmission using PUR when connected to EPC/ 5GC.

Yes

pur-FrequencyHopping

Indicates whether UE supports frequency hopping for transmission using PUR.

Yes

pur-PUSCH-NB-MaxTBS

Indicates whether the UE supports 2984 bits max UL TBS in 1.4 MHz for transmission using PUR when operating in CE mode A, as specified in TS 36.212 [22] and TS 36.213 [23].

Yes

pur-RSRP-Validation

Indicates whether UE supports serving cell RSRP for TA validation for transmission using PUR when connected to EPC/ 5GC.

Yes

pur-SubPRB-CE-ModeA, pur-SubPRB-CE-ModeB

Indicates whether UE supports subPRB resource allocation for PUSCH for transmission using PUR when operating in CE mode A/B.

Yes

pur-UP-EPC-CE-ModeA, pur-UP-EPC-CE-ModeB, pur-UP-5GC-CE-ModeA, pur-UP-5GC-CE-ModeB

Indicates whether UE operating in CE mode A/B supports UP transmission using PUR when connected to EPC/ 5GC.

Yes

pusch-Enhancements

Indicates whether the UE supports the PUSCH enhancement mode as specified in TS 36.211 [21] and TS 36.213 [23].

Yes

pusch-FeedbackMode

Indicates whether the UE supports PUSCH feedback mode 3-2.

No

pusch-MultiTB-CE-ModeA, pusch-MultiTB-CE-ModeB

Indicates whether the UE supports multiple TB scheduling in connected mode for PUSCH when operating in CE mode A/B, as specified in TS 36.211 [21] and TS 36.213 [23].

Yes

pusch-SPS-MaxConfigSlot

Indicates the max number of SPS configurations across all cells for slot PUSCH.

Yes

pusch-SPS-MultiConfigSlot

Indicates the number of multiple SPS configurations of slot PUSCH for each serving cell.

Yes

pusch-SPS-MaxConfigSubframe

Indicates the max number of SPS configurations across all cells for subframe PUSCH.

Yes

pusch-SPS-MultiConfigSubframe

Indicates the number of multiple SPS configurations of subframe PUSCH for each serving cell.

Yes

pusch-SPS-MaxConfigSubslot

Indicates the max number of SPS configurations across all cells for subslot PUSCH.

–

pusch-SPS-MultiConfigSubslot

Indicates the number of multiple SPS configurations of subslot PUSCH for each serving cell. This field is only applicable for UEs supporting FDD.

–

pusch-SPS-SlotRepPCell

Indicates whether the UE supports SPS repetition for slot PUSCH for PCell.

Yes

pusch-SPS-SlotRepPSCell

Indicates whether the UE supports SPS repetition for slot PUSCH for PSCell.

Yes

pusch-SPS-SlotRepSCell

Indicates whether the UE supports SPS repetition for slot PUSCH for serving cells other than SpCell.

Yes

pusch-SPS-SubframeRepPCell

Indicates whether the UE supports SPS repetition for subframe PUSCH for PCell.

Yes

pusch-SPS-SubframeRepPSCell

Indicates whether the UE supports SPS repetition for subframe PUSCH for PSCell.

Yes

pusch-SPS-SubframeRepSCell

Indicates whether the UE supports SPS repetition for subframe PUSCH for serving cells other than SpCell.

Yes

pusch-SPS-SubslotRepPCell

Indicates whether the UE supports SPS repetition for subslot PUSCH for PCell. This field is only applicable for UEs supporting FDD.

–

pusch-SPS-SubslotRepPSCell

Indicates whether the UE supports SPS repetition for subslot PUSCH for PSCell. This field is only applicable for UEs supporting FDD.

–

pusch-SPS-SubslotRepSCell

Indicates whether the UE supports SPS repetition for subslot PUSCH for serving cells other than SpCell. This field is only applicable for UEs supporting FDD.

–

pusch-SRS-PowerControl-SubframeSet

Indicates whether the UE supports subframe set dependent UL power control for PUSCH and SRS. This field is only applicable for UEs supporting TDD.

Yes

qcl-CRI-BasedCSI-Reporting

Indicates whether the UE supports CRI based CSI feedback for the FeCoMP feature as specified in TS 36.213 [23], clause 7.1.10.

–

qcl-TypeC-Operation

The UE uses this field to indicate the support of all of the following three features: QCL Type-C operation for FeCoMP, the capability to support separate PDSCH RE mapping for different PDSCH CWs in non-coherent joint transmission and the capability to support handling new DMRS port to MIMO layer mapping for the CWs, as specified in TS 36.213 [23], clause 7.1.10.

–

qoe-MeasReport

Indicates whether the UE supports QoE Measurement Collection for streaming services.

–

qoe-MTSI-MeasReport

Indicates whether the UE supports QoE Measurement Collection for MTSI services.

rach-Less

Indicates whether the UE supports RACH-less handover, and whether the UE which indicates dc-Parameters supports RACH-less SeNB change, as defined in TS 36.300 [9].

–

rach-Report

Indicates whether the UE supports delivery of rach-Report.

–

rai-Support

Defines whether the UE supports release assistance indication (RAI) as specified in TS 36.321 [6] for BL UEs.

No

rai-SupportEnh

Indicates whether the UE supports 2-bit RAI when connected to EPC as specified in TS 36.321 [6].

–

rclwi

Indicates whether the UE supports RCLWI, i.e. reception of rclwi-Configuration. The UE which supports RLCWI shall also indicate support of interRAT-ParametersWLAN-r13. The UE which supports RCLWI and wlan-IW-RAN-Rules shall also support applying WLAN identifiers received in rclwi-Configuration for the access network selection and traffic steering rules when in RRC_IDLE.

–

recommendedBitRate

Indicates whether the UE supports the bit rate recommendation message from the eNB to the UE as specified in TS 36.321 [6], clause 6.1.3.13.

No

recommendedBitRateMultiplier

Indicates whether the UE supports the bit rate multiplier for recommended bit rate MAC CE as specified in TS 36.321 [6], clause 6.1.3.13. If this field is included, the UE shall also include the recommendedBitRate field.

–

recommendedBitRateQuery

Indicates whether the UE supports the bit rate recommendation query message from the UE to the eNB as specified in TS 36.321 [6], clause 6.1.3.13. If this field is included, the UE shall also include the recommendedBitRate field.

No

reducedCP-Latency

Indicates whether the UE supports reduced CP latency.

Yes

reducedIntNonContComb

Indicates whether the UE supports receiving requestReducedIntNonContComb that requests the UE to exclude supported intra-band non-contiguous CA band combinations other than included in capability signalling as specified in TS 36.306 [5], clause 4.3.5.21.

–

reducedIntNonContCombRequested

Indicates that the UE excluded supported intra-band non-contiguous CA band combinations other than included in capability signalling as specified in TS 36.306 [5,] clause 4.3.5.21.

–

reflectiveQoS

Indicates whether the UE supports AS reflective QoS.

No

relWeightTwoLayers/ relWeightFourLayers/ relWeightEightLayers

Indicates relative weight of processing FD-MIMO with 2/ 4/ 8 layers with respect to non-FD-MIMO with the same number of layers, see NOTE 8. Value v1 corresponds to relative weight of 1, value v1dot25 corresponds to relative weight of 1.25 and so on. This field can be included only if the UE supports the corresponding number of layers (i.e., 2/ 4/ 8 layers).

–

reportCGI-NR-EN-DC

Indicates whether the UE supports Inter-RAT report CGI procedure towards NR cell when it is configured with (NG)EN-DC.

Yes

reportCGI-NR-NoEN-DC

Indicates whether the UE supports Inter-RAT report CGI procedure towards NR cell when it is not configured with (NG)EN-DC.

Yes

resumeWithMCG-SCellConfig

Indicates whether the UE supports (re-)configuration of E-UTRA MCG SCells.

–

resumeWithSCG-Config

Indicates whether the UE supports (re-)configuration of an NR SCG.

–

resumeWithStoredMCG-SCells

Indicates whether the UE supports not deleting the stored E-UTRA MCG SCell configuration when initiating the resume procedure.

–

resumeWithStoredSCG

Indicates whether the UE supports not deleting the stored NR SCG configuration when initiating the resume procedure.

–

srs-CapabilityPerBandPairList

Indicates, for a particular pair of bands, the SRS carrier switching parameters when switching between the band pair to transmit SRS on a PUSCH-less SCell as specified in TS 36.212 [22] and TS 36.213 [23]. If included, the UE shall include a number of entries as indicated in the following, and listed in the same order, as in bandParameterList for the concerned band combination:

– For the first band, the UE shall include the same number of entries as in bandParameterList i.e. first entry corresponds to first band in bandParameterList and so on,

– For the second band, the UE shall include one entry less i.e. first entry corresponds to the second band in bandParameterList and so on

– And so on.

–

requestedBands

Indicates the frequency bands requested by E-UTRAN.

–

requestedCCsDL, requestedCCsUL

Indicates the maximum number of CCs requested by E-UTRAN.

–

requestedDiffFallbackCombList

Indicates the CA band combinations for which report of different UE capabilities is requested by E-UTRAN.

–

rf-RetuningTimeDL

Indicates the interruption time on DL reception within a band pair during the RF retuning for switching between the band pair to transmit SRS on a PUSCH-less SCell. n0 represents 0 OFDM symbols, n0dot5 represents 0.5 OFDM symbols, n1 represents 1 OFDM symbol and so on. This field is mandatory present if switching between the band pair is supported.

–

rf-RetuningTimeUL

Indicates the interruption time on UL transmission within a band pair during the RF retuning for switching between the band pair to transmit SRS on a PUSCH-less SCell. n0 represents 0 OFDM symbols, n0dot5 represents 0.5 OFDM symbols, n1 represents 1 OFDM symbol and so on. This field is mandatory present if switching between the band pair is supported.

–

rlc-AM-Ooo-Delivery

Indicates whether the UE supports out-of-order delivery from RLC to PDCP for RLC AM.

–

rlc-UM-Ooo-Delivery

Indicates whether the UE supports out-of-order delivery from RLC to PDCP for RLC UM.

–

rlm-ReportSupport

Indicates whether the UE supports RLM event and information reporting.

–

rohc-ContextContinue

Same as "continueROHC-Context" defined in TS 38.306 [87].

No

rohc-ContextMaxSessions

Same as "maxNumberROHC-ContextSessions" defined in TS 38.306 [87].

No

rohc-Profiles

Same as "supportedROHC-Profiles" defined in TS 38.306 [87].

No

rohc-ProfilesUL-Only

Same as "uplinkOnlyROHC-Profiles" defined in TS 38.306 [87].

No

rsrqMeasWideband

Indicates whether the UE can perform RSRQ measurements with wider bandwidth.

Yes

rsrq-OnAllSymbols

Indicates whether the UE can perform RSRQ measurement on all OFDM symbols and also support the extended RSRQ upper value range from -3dB to 2.5dB in measurement configuration and reporting as specified in TS 36.133 [16].

No

rs-SINR-Meas

Indicates whether the UE can perform RS-SINR measurements in RRC_CONNECTED as specified in TS 36.214 [48].

–

rssi-AndChannelOccupancyReporting

Indicates whether the UE supports performing measurements and reporting of RSSI and channel occupancy. This field can be included only if downlinkLAA is included.

–

sa-NR

Indicates whether the UE supports standalone NR as specified in TS 38.331 [82].

No

scalingFactorTxSidelink, scalingFactorRxSidelink

Indicates, for a particular band combination of EUTRA, the scaling facor, as defined in TS 38.306 [87], for the PC5 band combination(s) v2x-SupportedBandCombinationListEUTRA-NR on which the UE supports simultaneous transmission/reception of EUTRA and NR sidelink communication respectively, or simultaneous transmission or reception of EUTRA and joint V2X sidelink communication and NR sidelink communication respectively (as indicated by v2x-SupportedTxBandCombListPerBC-v1630 / v2x-SupportedRxBandCombListPerBC-v1630). The leading / leftmost value corresponds to the first band combination included in v2x-SupportedBandCombinationListEUTRA-NR which is indicated with value 1 by v2x-SupportedTxBandCombListPerBC-v1630 / v2x-SupportedRxBandCombListPerBC-v1630, the next value corresponds to the second band combination included in v2x-SupportedBandCombinationListEUTRA-NR which is indicated with value 1 by v2x-SupportedTxBandCombListPerBC-v1630 / v2x-SupportedRxBandCombListPerBC-v1630 and so on. For each value of ScalingFactorSidelink-r16, value f0p4 indicates the scaling factor 0.4, f0p75 indicates 0.75, and so on.

–

scptm-AsyncDC

Indicates whether the UE in RRC_CONNECTED supports MBMS reception via SC-MRB on a frequency indicated in an MBMSInterestIndication message, where (according to supportedBandCombination) the carriers that are or can be configured as serving cells in the MCG and the SCG are not synchronized. If this field is included, the UE shall also include scptm-SCell and scptm-NonServingCell.

Yes

scptm-NonServingCell

Indicates whether the UE in RRC_CONNECTED supports MBMS reception via SC-MRB on a frequency indicated in an MBMSInterestIndication message, where (according to supportedBandCombination and to network synchronization properties) a serving cell may be additionally configured. If this field is included, the UE shall also include the scptm-SCell field.

Yes

scptm-Parameters

Presence of the field indicates that the UE supports SC-PTM reception as specified in TS 36.306 [5].

Yes

scptm-SCell

Indicates whether the UE in RRC_CONNECTED supports MBMS reception via SC-MRB on a frequency indicated in an MBMSInterestIndication message, when an SCell is configured on that frequency (regardless of whether the SCell is activated or deactivated).

Yes

scptm-ParallelReception

Indicates whether the UE in RRC_CONNECTED supports parallel reception in the same subframe of DL-SCH transport blocks transmitted using C-RNTI/Semi-Persistent Scheduling C-RNTI and using SC-RNTI/G-RNTI as specified in TS 36.306 [5].

Yes

secondSlotStartingPosition

Indicates whether the UE supports reception of subframes with second slot starting position as described in TS 36.211 [21] and TS 36.213 [23]. This field can be included only if downlinkLAA is included.

–

semiOL

Indicates whether the UE supports semi-open-loop transmission for the indicated transmission mode.

Yes

semiStaticCFI

Indicates whether the UE supports the semi-static configuration of CFI for subframe/slot/sub-slot operation.

Yes

semiStaticCFI-Pattern

Indicates whether the UE supports the semi-static configuration of CFI pattern for subframe/slot/sub-slot operation. This field is only applicable for UEs supporting TDD.

–

sharedSpectrumMeasNR-EN-DC

Indicates whether the UE supports performing measurements and reporting of RSSI and channel occupancy on each supported NR band in EN-DC. If included, the UE shall include the same number of entries, and listed in the same order as in supportedBandListEN-DC-r15.

–

sharedSpectrumMeasNR-SA

Indicates whether the UE supports performing measurements and reporting of RSSI and channel occupancy on each supported NR band in NR SA. If included, the UE shall include the same number of entries, and listed in the same order as in supportedBandListNR-SA-r15.

–

shortCQI-ForSCellActivation

Indicates whether the UE supports additional CQI reporting periodicity after SCell activation.

Yes

shortMeasurementGap
Indicates whether the UE supports shorter measurement gap length (i.e. gp2 and gp3) in LTE standalone as specified in TS 36.133 [16], and for independent measurement gap configuration on FR1 and per-UE gap in (NG)EN-DC as specified in TS38.133 [84].

No

shortSPS-IntervalFDD

Indicates whether the UE supports uplink SPS intervals shorter than 10 subframes in FDD mode.

–

shortSPS-IntervalTDD

Indicates whether the UE supports uplink SPS intervals shorter than 10 subframes in TDD mode.

–

simultaneousPUCCH-PUSCH

Indicates whether the UE supports simultaneous transmission of PUSCH/PUCCH and SlotOrSubslotPUSCH/SPUCCH (if supported).

Yes

simultaneousRx-Tx

Indicates whether the UE supports simultaneous reception and transmission on different bands for each band combination listed in supportedBandCombination. This field is only applicable for inter-band TDD band combinations. A UE indicating support of simultaneousRx-Tx and dc-Support-r12 shall support different UL/DL configurations between PCell and PSCell.

–

simultaneousTx-DifferentTx-Duration

Indicates whether the UE supports simultaneous transmission of different transmission durations over different carriers. The different transmission durations can be of subframe, slot or subslot duration.

–

skipFallbackCombinations

Indicates whether UE supports receiving requestSkipFallbackComb that requests UE to exclude fallback band combinations from capability signalling.

–

skipFallbackCombRequested

Indicates whether requestSkipFallbackComb is requested by E-UTRAN.

–

skipMonitoringDCI-Format0-1A

Indicates whether UE supports blind decoding reduction on UE specific search space by not monitoring DCI Format 0 and 1A as specified in TS 36.213 [23], clause 9.1.1.

No

skipSubframeProcessing

This fields defines whether the UE supports aborting reception of PDSCH if the UE receives slot-PDSCH/subslot-PDSCH during an ongoing PDSCH reception and instead starts receiving the slot-PDSCH/subslot-PDSCH, as well as whether the UE supports aborting a PUSCH transmission if the UE gets a grant for a slot-PUSCH/ subslot-PUSCH transmission that overlaps with a grant received for a PUSCH transmission. The capability indicates the number of subframes that the UE may drop prior to the subframe in which it prioritizes the processing of slot/subslot PDSCH/PUSCH as described in TS 36.213 [23], clauses 7.1 and 8.0. Separate capability for UL and DL and per sTTI length in each direction: skipProcessingDL-Slot, skipProcessingDL-Subslot, skipProcessingUL-Slot and skipProcessingUL-Subslot.

–

skipUplinkDynamic

Indicates whether the UE supports skipping of UL transmission for an uplink grant indicated on PDCCH if no data is available for transmission as described in TS 36.321 [6].

–

skipUplinkSPS

Indicates whether the UE supports skipping of UL transmission for a configured uplink grant if no data is available for transmission as described in TS 36.321 [6].

–

sl-64QAM-Rx

Indicates whether the UE supports 64QAM for the reception of V2X sidelink communication.

–

sl-64QAM-Tx

Indicates whether the UE supports 64QAM for the transmission of V2X sidelink communication.

–

sl-CongestionControl

Indicates whether the UE supports Channel Busy Ratio measurement and reporting of Channel Busy Ratio measurement results to eNB for V2X sidelink communication.

–

sl-LowT2min

Indicates whether the UE supports 10ms as minimum value of T2 for resource selection procedure of V2X sidelink communication.

–

sl-ParameterNR

Includes the SidelinkParametersNR IE as specified in TS 38.331 [82]. The field includes the sidelink capability for NR-PC5, where multipleSR-ConfigurationsSidelink, logicalChannelSR-DelayTimerSidelink and relayParameters are not applicable.

–

sl-RateMatchingTBSScaling

Indicates whether the UE supports rate matching and TBS scalling for V2X sidelink communication.

–

slotPDSCH-TxDiv-TM8

Indicates whether the UE supports TX diversity transmission using ports 7 and 8 for TM8 for slot PDSCH.

–

slotPDSCH-TxDiv-TM9and10

Indicates whether the UE supports TX diversity transmission using ports 7 and 8 for TM9/10 for slot PDSCH.

Yes

slotSymbolResourceResvDL-CE-ModeA, slotSymbolResourceResvDL-CE-ModeB, slotSymbolResourceResvUL-CE-ModeA, slotSymbolResourceResvUL-CE-ModeB

Indicates whether the UE supports slot/symbol-level time-domain resource reservation in downlink/uplink when operating in CE mode A/B, as specified in TS 36.211 [21] and TS 36.213 [23].

Yes

slss-SupportedTxFreq

Indicates whether the UE supports the SLSS transmission on single carrier or on multiple carriers in the case of sidelink carrier aggregation.

–

slss-TxRx

Indicates whether the UE supports SLSS/PSBCH transmission and reception in UE autonomous resource selection mode and eNB scheduled mode in a band for V2X sidelink communication.

–

sl-TxDiversity

Indicates whether the UE supports transmit diversity for V2X sidelink communication. See TS 36.101 [42].

–

sn-SizeLo

Same as "shortSN" defined in TS 38.306 [87].

No

spatialBundling-HARQ-ACK

Indicates whether UE supports HARQ-ACK spatial bundling on PUCCH or PUSCH as specified in TS 36.213 [23], clauses 7.3.1 and 7.3.2.

No

spdcch-differentRS-types

Indicates whether the UE supports monitoring of sPDCCH on RB sets with different RS types within a TTI.

Yes

spdcch-Reuse

Indicates whether the UE supports L1 based SPDCCH reuse.

Yes

sps-CyclicShift

Indicates whether the UE supports RRC configuration of cyclic shift for DMRS for UL SPS using 1ms TTI.

Yes

sps-ServingCell

Indicates whether the UE supports multiple UL/DL SPS configurations simultaneously active on different serving cells as specified in TS 36.321 [6].

–

sps-STTI

Indicates whether the UE supports SPS in DL and/or UL for slot or subslot based PDSCH and PUSCH, respectively.

Yes

srs-DCI7-TriggeringFS2

Indicates whether the UE supports SRS triggerring via DCI format 7 for FS2.

–

srs-Enhancements

Indicates whether the UE supports SRS enhancements.

Yes

srs-EnhancementsTDD

Indicates whether the UE supports TDD specific SRS enhancements.

Yes

srs-FlexibleTiming

Indicates whether the UE supports configuration of soundingRS-FlexibleTiming-r14 for the corresponding band pair. For a TDD-TDD band pair, UE shall include at least one of srs-FlexibleTiming and/or srs-HARQ-ReferenceConfig when rf-RetuningTimeDL or rf-RetuningTimeUL corresponding to the band pair is larger than 1 OFDM symbol.

–

srs-HARQ-ReferenceConfig

Indicates whether the UE supports configuration of harq-ReferenceConfig-r14 for the corresponding band pair. For a TDD-TDD band pair, UE shall include at least one of srs-FlexibleTiming and/or srs-HARQ-ReferenceConfig when rf-RetuningTimeDL or rf-RetuningTimeUL corresponding to the band pair is larger than 1 OFDM symbol.

–

srs-MaxSimultaneousCCs

Indicates the maximum number of simultaneously configurable target CCs for SRS switching (i.e., CCs for which srs-SwitchFromServCellIndex is configured) supported by the UE.

–

srs-UpPTS-6sym

Indicates whether the UE supports up to 6-symbol SRS in UpPTS.

–

srvcc-FromUTRA-FDD-ToGERAN

Indicates whether UE supports SRVCC handover from UTRA FDD PS HS to GERAN CS.

–

srvcc-FromUTRA-FDD-ToUTRA-FDD

Indicates whether UE supports SRVCC handover from UTRA FDD PS HS to UTRA FDD CS.

–

srvcc-FromUTRA-TDD128-ToGERAN

Indicates whether UE supports SRVCC handover from UTRA TDD 1.28Mcps PS HS to GERAN CS.

–

srvcc-FromUTRA-TDD128-ToUTRA-TDD128

Indicates whether UE supports SRVCC handover from UTRA TDD 1.28Mcps PS HS to UTRA TDD 1.28Mcps CS.

–

ss-CCH-InterfHandl

Indicates whether the UE supports synchronisation signal and common channel interference handling.

Yes

ss-SINR-Meas-NR-FR1, ss-SINR-Meas-NR-FR2

Indicates whether the UE can perform NR SS-SINR measurement for a frequency range (i.e. FR1 or FR2) as specified in TS 38.215 [89].

–

ssp10-TDD-Only

Indicates the UE supports special subframe configuration 10 when operating only in TDD carriers (i.e., not in TDD/FDD CA or TDD/FS3 CA). A UE including this field shall not include tdd-SpecialSubframe-r14.

–

standaloneGNSS-Location

Indicates whether the UE is equipped with a standalone GNSS receiver that may be used to provide detailed location information in RRC measurement report and logged measurements.

–

sTTI-SPT-Supported

Indicates whether the UE supports the features STTI and/or SPT. If the UE supports STTI and/or SPT features, the UE shall report the field sTTI-SPT-Supported set to supported in capability signalling, irrespective of whether requestSTTI-SPT-Capability field is present or not.

–

sTTI-FD-MIMO-Coexistence

Indicates whether the UE supports CSI feedback for more than 8 NZP CSI-RS ports on subframe based PUSCH in any serving cell and supporting STTI in any serving cell.

–

sTTI-SupportedCombinations

Indicates the different combinations of short TTI lengths, see field description for dl-STTI-Length and ul-STTI-Length, that the UE supports in a single PUCCH group or in two PUCCH groups. A short TTI length combination is reported for DL first followed by UL. In case of two PUCCH groups the support for the primary PUCCH group is indicated first.

–

subcarrierPuncturingCE-ModeA, subcarrierPuncturingCE-ModeB

Indicates whether the UE supports subcarrier puncturing in downlink when operating in CE mode A/B, as specified in TS 36.211 [21] and TS 36.213 [23].

Yes

subcarrierSpacingMBMS-khz7dot5, subcarrierSpacingMBMS-khz1dot25

Indicates the supported subcarrier spacings for MBSFN subframes in addition to 15 kHz subcarrier spacing. subcarrierSpacingMBMS-khz1dot25 and subcarrierSpacingMBMS-khz7dot5 indicates that the UE supports 1.25 and 7.5 kHz respectively for MBSFN subframes as described in TS 36.211 [21], clause 6.12. This field is included only if fembmsMixedCell or fembmsDedicatedCell is included.

–

subcarrierSpacingMBMS-khz2dot5, subcarrierSpacingMBMS-khz0dot37

Presence of this field indicates the supported subcarrier spacings of 2.5kHz / 0.37kHz for MBSFN subframes in addition to 15 kHz subcarrier spacing when operating on the E-UTRA band given by the entry in mbms-SupportedBandInfoList as described in TS 36.211 [21], clause 6.12.

–

subframeResourceResvDL-CE-ModeA, subframeResourceResvDL-CE-ModeB, subframeResourceResvUL-CE-ModeA, subframeResourceResvUL-CE-ModeB

Indicates whether the UE supports Subframe-level time-domain resource reservation in downlink/uplink when operating in CE mode A/B, as specified in TS 36.211 [21] and TS 36.213 [23].

Yes

subslotPDSCH-TxDiv-TM9and10

Indicates whether the UE supports TX diversity transmission using ports 7 and 8 for TM9/10 for subslot PDSCH.

Yes

supportedBandCombination

Includes the supported CA band combinations, if any, and may include all the supported non-CA bands.

–

supportedBandCombinationAdd-r11

Includes additional supported CA band combinations in case maximum number of CA band combinations of supportedBandCombination is exceeded.

–

SupportedBandCombinationAdd-v11d0, SupportedBandCombinationAdd-v1250, SupportedBandCombinationAdd-v1270, SupportedBandCombinationAdd-v1320, SupportedBandCombinationAdd-v1380, SupportedBandCombinationAdd-v1390, SupportedBandCombinationAdd-v1430, SupportedBandCombinationAdd-v1450, SupportedBandCombinationAdd-v1470, SupportedBandCombinationAdd-v14b0, SupportedBandCombinationAdd-v1530, SupportedBandCombinationAdd-v1630

If included, the UE shall include the same number of entries, and listed in the same order, as in SupportedBandCombinationAdd-r11.

–

SupportedBandCombinationAdd-v1610

If included, the UE shall include the same number of entries, and listed in the same order, as in SupportedBandCombinationAdd-r11. If absent, network assumes gap is required when measurement is performed on any NR bands while UE is served by cell(s) belongs to an E-UTRA CA band combinations listed in SupportedBandCombinationAdd-r11 except for the FR2 inter-RAT measurement which depends on the support of independentGapConfig.

–

SupportedBandCombinationExt, SupportedBandCombination-v1090, SupportedBandCombination-v10i0, SupportedBandCombination-v1130, SupportedBandCombination-v1250, SupportedBandCombination-v1270, SupportedBandCombination-v1320, SupportedBandCombination-v1380, SupportedBandCombination-v1390, SupportedBandCombination-v1430, SupportedBandCombination-v1450, SupportedBandCombination-v1470, SupportedBandCombination-v14b0, SupportedBandCombination-v1530, SupportedBandCombination-v1630

If included, the UE shall include the same number of entries, and listed in the same order, as in supportedBandCombination-r10.

–

SupportedBandCombination-v1610

If included, the UE shall include the same number of entries, and listed in the same order, as in supportedBandCombination-r10. If absent, network assumes gap is required when measurement is performed on any NR bands while UE is served by cell(s) belongs to an E-UTRA CA band combinations listed in supportedBandCombination-r10 except for the FR2 inter-RAT measurement which depends on the support of independentGapConfig.

–

supportedBandCombinationReduced

Includes the supported CA band combinations, and may include the fallback CA combinations specified in TS 36.101 [42], clause 4.3A. This field also indicates whether the UE supports reception of requestReducedFormat.

–

SupportedBandCombinationReduced-v1320, SupportedBandCombinationReduced-v1380, SupportedBandCombinationReduced-v1390, SupportedBandCombinationReduced-v1430, SupportedBandCombinationReduced-v1450, SupportedBandCombinationReduced-v1470, SupportedBandCombinationReduced-v14b0, SupportedBandCombinationReduced-v1530, SupportedBandCombinationReduced-v1630

If included, the UE shall include the same number of entries, and listed in the same order, as in supportedBandCombinationReduced-r13.

–

SupportedBandCombinationReduced-v1610

If included, the UE shall include the same number of entries, and listed in the same order, as in supportedBandCombinationReduced-r13. If absent, network assumes gap is required when measurement is performed on any NR bands while UE is served by cell(s) belongs to an E-UTRA CA band combinations listed in supportedBandCombinationReduced-r13 except for the FR2 inter-RAT measurement which depends on the support of independentGapConfig.

–

SupportedBandGERAN

GERAN band as defined in TS 45.005 [20].

No

SupportedBandList1XRTT

One entry corresponding to each supported CDMA2000 1xRTT band class.

–

SupportedBandListEUTRA

Includes the supported E-UTRA bands. This field shall include all bands which are indicated in BandCombinationParameters.

–

SupportedBandListEUTRA-v9e0, SupportedBandListEUTRA-v1250, SupportedBandListEUTRA-v1310, SupportedBandListEUTRA-v1320

If included, the UE shall include the same number of entries, and listed in the same order, as in supportedBandListEUTRA (i.e. without suffix).

–

SupportedBandListGERAN

No

SupportedBandListHRPD

One entry corresponding to each supported CDMA2000 HRPD band class.

–

SupportedBandListNR-SA

Includes the NR bands supported by the UE in NR-SA (for handover and redirection). The field is included in case the UE supports NR SA as specified in TS 38.331 [32] and not otherwise. The presence of this field also indicates that the UE can perform both NR SS-RSRP and SS-RSRQ measurement in the included NR band(s) as specified in TS 38.215 [89].

No

supportedBandListEN-DC

Includes the NR bands supported by the UE in (NG)EN-DC. The field is included in case the parameter en-DC or ng-EN-DC is present and set to supported and not otherwise. The presence of this field also indicates that the UE can perform both NR SS-RSRP and SS-RSRQ measurement in the included NR band(s) as specified in TS 38.215 [89].

–

supportedBandListWLAN

Indicates the supported WLAN bands by the UE.

–

SupportedBandUTRA-FDD

UTRA band as defined in TS 25.101 [17].

–

SupportedBandUTRA-TDD128

UTRA band as defined in TS 25.102 [18].

–

SupportedBandUTRA-TDD384

UTRA band as defined in TS 25.102 [18].

–

SupportedBandUTRA-TDD768

UTRA band as defined in TS 25.102 [18].

–

supportedBandwidthCombinationSet

The supportedBandwidthCombinationSet indicated for a band combination is applicable to all bandwidth classes indicated by the UE in this band combination.

Field encoded as a bit map, where bit N is set to "1" if UE support Bandwidth Combination Set N for this band combination, see 36.101 [42]. The leading / leftmost bit (bit 0) corresponds to the Bandwidth Combination Set 0, the next bit corresponds to the Bandwidth Combination Set 1 and so on. The UE shall neither include the field for a non-CA band combination, nor for a CA band combination for which the UE only supports Bandwidth Combination Set 0.

–

supportedCellGrouping