7 Variables and constants
36.3213GPPEvolved Universal Terrestrial Radio Access (E-UTRA)Medium Access Control (MAC) protocol specificationRelease 17TS
7.1 RNTI values
RNTI values are presented in Table 7.1-1 and their usage and associated Transport Channels and Logical Channels are presented in Table 7.1-2.
Table 7.1-1: RNTI values.
|
Value (hexa-decimal) |
RNTI |
|
0000 |
N/A |
|
0001-0960 0001-1000 (Note 3) |
RA-RNTI, C-RNTI, Semi-Persistent Scheduling C-RNTI, Temporary C-RNTI, eIMTA-RNTI, TPC-PUCCH-RNTI, TPC-PUSCH-RNTI, SL-RNTI (see note), G-RNTI, SL-V-RNTI, UL Semi-Persistent Scheduling V-RNTI, SL Semi-Persistent Scheduling V-RNTI, SRS-TPC-RNTI, AUL C-RNTI, and PUR-RNTI |
|
0961-FFF3 1001-FFF3 (Note 3) |
C-RNTI, Semi-Persistent Scheduling C-RNTI, eIMTA-RNTI, Temporary C-RNTI, TPC-PUCCH-RNTI, TPC-PUSCH-RNTI, SL-RNTI, G-RNTI, SL-V-RNTI, UL Semi-Persistent Scheduling V-RNTI, SL Semi-Persistent Scheduling V-RNTI, SRS-TPC-RNTI, AUL C-RNTI, and PUR-RNTI |
|
FFF4-FFF8 |
Reserved for future use |
|
FFF9 |
SI-RNTI |
|
FFFA |
SC-N-RNTI |
|
FFFB |
SC-RNTI |
|
FFFC |
CC-RNTI |
|
FFFD |
M-RNTI |
|
FFFE |
P-RNTI |
|
FFFF |
SI-RNTI |
NOTE 1: A MAC entity uses the same C-RNTI on all Serving Cells.
NOTE 2: SI-RNTI value FFFF may be used for MBMS-dedicated carrier. SI-RNTI value FFF9 is only used for MBMS-dedicated carrier.
NOTE 3: Range applicable for NB-IoT.
Table 7.1-2: RNTI usage.
|
RNTI |
Usage |
Transport Channel |
Logical Channel |
|
P-RNTI |
Paging and System Information change notification |
PCH |
PCCH |
|
SI-RNTI |
Broadcast of System Information |
DL-SCH |
BCCH, BR-BCCH |
|
M-RNTI |
MCCH Information change notification |
N/A |
N/A |
|
RA-RNTI |
Random Access Response |
DL-SCH |
N/A |
|
eIMTA-RNTI |
eIMTA TDD UL/DL configuration notification |
N/A |
N/A |
|
Temporary C-RNTI |
Contention Resolution |
DL-SCH |
CCCH, DCCH |
|
Temporary C-RNTI |
Msg3 transmission |
UL-SCH |
CCCH, DCCH, DTCH |
|
C-RNTI |
Dynamically scheduled unicast transmission |
UL-SCH |
DCCH, DTCH |
|
C-RNTI |
Dynamically scheduled unicast transmission |
DL-SCH |
CCCH, DCCH, DTCH |
|
C-RNTI |
Triggering of PDCCH ordered random access |
N/A |
N/A |
|
Semi-Persistent Scheduling C-RNTI |
Semi-Persistently scheduled unicast transmission (activation, reactivation and retransmission) |
DL-SCH, UL-SCH |
DCCH, DTCH |
|
Semi-Persistent Scheduling C-RNTI |
Semi-Persistently scheduled unicast transmission (deactivation) |
N/A |
N/A |
|
TPC-PUCCH-RNTI |
Physical layer Uplink power control |
N/A |
N/A |
|
TPC-PUSCH-RNTI |
Physical layer Uplink power control |
N/A |
N/A |
|
SL-RNTI |
Dynamically scheduled sidelink transmission for sidelink communication |
SL-SCH |
STCH |
|
SC-RNTI |
Dynamically scheduled SC-PTM control information |
DL-SCH |
SC-MCCH |
|
G-RNTI |
Dynamically scheduled SC-PTM transmission |
DL-SCH |
SC-MTCH |
|
SC-N-RNTI |
SC-MCCH Information change notification |
N/A |
N/A |
|
CC-RNTI |
Providing common control PDCCH information |
N/A |
N/A |
|
SL-V-RNTI |
Dynamically scheduled sidelink transmission for V2X sidelink communication |
SL-SCH |
STCH |
|
UL Semi-Persistent Scheduling V-RNTI |
Semi-Persistently scheduled uplink transmission for V2X communication (activation, reactivation and retransmission) |
UL-SCH |
DCCH, DTCH |
|
UL Semi-Persistent Scheduling V-RNTI |
Semi-Persistently scheduled uplink transmission for V2X communication (deactivation) |
N/A |
N/A |
|
SL Semi-Persistent Scheduling V-RNTI |
Semi-Persistently scheduled sidelink transmission for V2X sidelink communication (activation, reactivation and retransmission) |
SL-SCH |
STCH |
|
SL Semi-Persistent Scheduling V-RNTI |
Semi-Persistently scheduled sidelink transmission for V2X sidelink communication (deactivation) |
N/A |
N/A |
|
SRS-TPC-RNTI |
SRS and TPC for the PUSCH-less SCells |
N/A |
N/A |
|
AUL C-RNTI |
Autonomous Uplink C-RNTI unicast transmission (activation and reactivation) |
UL-SCH |
DCCH, DTCH |
|
AUL C-RNTI |
Autonomous Uplink C-RNTI unicast transmission (deactivation) |
N/A |
N/A |
|
PUR-RNTI |
Transmission using Preconfigured Uplink Resource |
DL-SCH, UL-SCH |
CCCH, DCCH, DTCH |
|
PUR-RNTI |
Transmission using Preconfigured Uplink Resource (L1 ACK or fallback indication) |
N/A |
N/A |
7.2 Backoff Parameter values
Backoff Parameter values are presented in Table 7.2-1 except for NB-IoT where Table 7.2-2 shall be used.
Table 7.2-1: Backoff Parameter values.
|
Index |
Backoff Parameter value (ms) |
|
0 |
0 |
|
1 |
10 |
|
2 |
20 |
|
3 |
30 |
|
4 |
40 |
|
5 |
60 |
|
6 |
80 |
|
7 |
120 |
|
8 |
160 |
|
9 |
240 |
|
10 |
320 |
|
11 |
480 |
|
12 |
960 |
|
13 |
Reserved |
|
14 |
Reserved |
|
15 |
Reserved |
The reserved values of the backoff parameter if received by the current release version UEs shall be taken as 960 ms.
Table 7.2-2: Backoff Parameter values for NB-IoT.
|
Index |
Backoff Parameter value (ms) |
|
0 |
0 |
|
1 |
256 |
|
2 |
512 |
|
3 |
1024 |
|
4 |
2048 |
|
5 |
4096 |
|
6 |
8192 |
|
7 |
16384 |
|
8 |
32768 |
|
9 |
65536 |
|
10 |
131072 |
|
11 |
262144 |
|
12 |
524288 |
|
13 |
Reserved |
|
14 |
Reserved |
|
15 |
Reserved |
The reserved values of the backoff parameter if received by the current release version NB-IoT UEs shall be taken as 524288 ms.
7.3 PRACH Mask Index values
Table 7.3-1: PRACH Mask Index values
|
PRACH Mask Index |
Allowed PRACH (FDD) |
Allowed PRACH (TDD) |
|
0 |
All |
All |
|
1 |
PRACH Resource Index 0 |
PRACH Resource Index 0 |
|
2 |
PRACH Resource Index 1 |
PRACH Resource Index 1 |
|
3 |
PRACH Resource Index 2 |
PRACH Resource Index 2 |
|
4 |
PRACH Resource Index 3 |
PRACH Resource Index 3 |
|
5 |
PRACH Resource Index 4 |
PRACH Resource Index 4 |
|
6 |
PRACH Resource Index 5 |
PRACH Resource Index 5 |
|
7 |
PRACH Resource Index 6 |
Reserved |
|
8 |
PRACH Resource Index 7 |
Reserved |
|
9 |
PRACH Resource Index 8 |
Reserved |
|
10 |
PRACH Resource Index 9 |
Reserved |
|
11 |
Every, in the time domain, even PRACH opportunity 1st PRACH Resource Index in subframe |
Every, in the time domain, even PRACH opportunity 1st PRACH Resource Index in subframe |
|
12 |
Every, in the time domain, odd PRACH opportunity 1st PRACH Resource Index in subframe |
Every, in the time domain, odd PRACH opportunity 1st PRACH Resource Index in subframe |
|
13 |
Reserved |
1st PRACH Resource Index in subframe |
|
14 |
Reserved |
2nd PRACH Resource Index in subframe |
|
15 |
Reserved |
3rd PRACH Resource Index in subframe |
7.4 Subframe_Offset values
Subframe_Offset values are presented in Table 7.4-1.
Table 7.4-1: Subframe_Offset values
|
TDD UL/DL configuration |
Position of initial Semi-Persistent grant |
Subframe_Offset value (ms) |
|
0 |
N/A |
0 |
|
1 |
Subframes 2 and 7 |
1 |
|
Subframes 3 and 8 |
-1 |
|
|
2 |
Subframe 2 |
5 |
|
Subframe 7 |
-5 |
|
|
3 |
Subframes 2 and 3 |
1 |
|
Subframe 4 |
-2 |
|
|
4 |
Subframe 2 |
1 |
|
Subframe 3 |
-1 |
|
|
5 |
N/A |
0 |
|
6 |
N/A |
0 |
7.5 TTI_BUNDLE_SIZE value
The parameter TTI_BUNDLE_SIZE is 4.
7.6 DELTA_PREAMBLE values
Except for NB-IoT, the DELTA_PREAMBLE preamble format based power offset values are presented in Table 7.6-1.
Table 7.6-1: DELTA_PREAMBLE values.
|
Preamble Format |
DELTA_PREAMBLE value |
|
0 |
0 dB |
|
1 |
0 dB |
|
2 |
-3 dB |
|
3 |
-3 dB |
|
4 |
8 dB |
Where the Preamble Format is given by prach-ConfigIndex, as specified in TS 36.211 [7].
For NB-IoT, the DELTA_PREAMBLE preamble format based power offset values are presented in Table 7.6-2.
Table 7.6-2: DELTA_PREAMBLE values for NB-IoT.
|
Preamble Format |
DELTA_PREAMBLE value |
|
|
Frame Structure Type 1 |
Frame Structure Type 2 |
|
|
0, 1 |
0 dB |
0dB |
|
0a, 1a |
– |
0dB |
|
2 |
10*log10(1/3) dB |
0dB |
Where Preamble Format is specified in TS 36.211 [7].
7.7 HARQ RTT Timers
For each serving cell, in case of FDD configuration not configured with subframeAssignment-r15 and in case of Frame Structure Type 3 configuration on the serving cell which carries the HARQ feedback for this serving cell the HARQ RTT Timer is set to 8 subframes. For each serving cell, in case of TDD configuration or FDD with subframeAssignment-r15 configured on the serving cell which carries the HARQ feedback for this serving cell the HARQ RTT Timer is set to k + 4 subframes, where k is the interval between the downlink transmission and the transmission of associated HARQ feedback, as indicated in clauses 10.1 and 10.2 of TS 36.213 [2], and for an RN configured with rn-SubframeConfig, as specified in TS 36.331 [8] and not suspended, as indicated in Table 7.5.1-1 of TS 36.216 [11].
For each serving cell, for HARQ processes scheduled using Short Processing Time (TS 36.331 [8]) the HARQ RTT Timer is set to 6 subframes for FDD and Frame Structure Type 3 and set to k + 3 subframes for TDD, where k is the interval between the downlink transmission and the transmission of associated HARQ feedback, as indicated in clauses 10.1 and 10.2 of TS 36.213 [2].
For each serving cell, for HARQ processes scheduled using short TTI (TS 36.331 [8]) the HARQ RTT Timer is set to 8 TTIs if the TTI length is one slot or if proc-Timeline is set to n+4 set1, to 12 TTIs if proc-Timeline is set to n+6 set1 or n+6 set2 and to 16 TTIs if proc-Timeline is set to n+8 set2 for FDD and Frame Structure Type 3.
For TDD short TTI the HARQ RTT Timer is set to k + 4 TTIs, where k is the interval between the downlink transmission and the transmission of associated HARQ feedback, as indicated in clauses 10.1 and 10.2 of TS 36.213 [2].
For BL UEs and UEs in enhanced coverage, when single TB is scheduled by PDCCH the HARQ RTT Timer corresponds to 7 + N + RTToffset, where N is the used PUCCH repetition factor, where only valid (configured) UL subframes as configured by upper layers in fdd-UplinkSubframeBitmapBR are counted for N. In case of TDD, HARQ RTT Timer corresponds to 3 + k + N + RTToffset, where k is the interval between the last repetition of downlink transmission and the first repetition of the transmission of associated HARQ feedback, and N is the used PUCCH repetition factor, where only valid UL subframes are counted for N as indicated in clauses 10.1 and 10.2 of TS 36.213 [2].
For BL UEs and UEs in enhanced coverage, when multiple TBs are scheduled by PDCCH and HARQ-ACK bundling is not configured, the HARQ RTT Timer corresponds to 7 + m * N + RTToffset, where N is the used PUCCH repetition factor and m is the number of scheduled TBs as indicated in PDCCH, where only valid (configured) UL subframes as configured by upper layers in fdd-UplinkSubframeBitmapBR are counted for m * N.
For BL UEs and UEs in enhanced coverage, when multiple TBs are scheduled by PDCCH and HARQ-ACK bundling is configured the HARQ RTT Timer corresponds to 7 + M * N + RTToffset, where N is the used PUCCH repetition factor and M is the number of TB bundles as specified in clause 7.3 of TS 36.213 [2], where only valid (configured) UL subframes as configured by upper layers in fdd-UplinkSubframeBitmapBR are counted for M * N.
For NB-IoT, when single TB is scheduled by PDCCH or when multiple TBs are scheduled for the interleaved case when HARQ-ACK bundling is configured the HARQ RTT Timer is set to k+3+N + RTToffset +deltaPDCCH subframes, where k is the interval between the last subframe of the downlink transmission and the first subframe of the associated HARQ feedback transmission and N is the transmission duration in subframes of the associated HARQ feedback, and deltaPDCCH is the interval starting from the subframe following the last subframe of the associated HARQ feedback transmission plus 3+ RTToffset subframes to the first subframe of the next PDCCH occasion.
For NB-IoT, when multiple TBs are scheduled by PDCCH for the non-interleaved case or for the interleaved case when HARQ-ACK bundling is not configured, the HARQ RTT Timer is set to k+2*N+1 + RTToffset +deltaPDCCH subframes where k is the interval between the last subframe of the downlink transmission and the first subframe of the first HARQ feedback transmission and N is the transmission duration in subframes of the associated HARQ feedback, and deltaPDCCH is the interval starting from the subframe following the last subframe of the last HARQ feedback transmission plus 1 + RTToffset subframes to the first subframe of the next PDCCH occasion.
Except for NB-IoT and for HARQ processes scheduled using Short Processing Time and for short TTI, UL HARQ RTT Timer length is set to 4 subframes for FDD and Frame Structure Type 3, and set to kULHARQRTT subframes for TDD, where kULHARQRTT equals to the kPHICH value indicated in Table 9.1.2-1 of TS 36.213 [2] if the UE is not configured with upper layer parameter symPUSCH-UpPts for the serving cell, otherwise the kPHICH value is indicated in Table 9.1.2-3.
For NB-IoT, when single TB is scheduled by PDCCH the UL HARQ RTT timer length is set to 4 + RTToffset +deltaPDCCH subframes, where deltaPDCCH is the interval starting from the subframe following the last subframe of the PUSCH transmission plus 3 + RTToffset subframes to the first subframe of the next PDCCH occasion.
For NB-IoT, when multiple TBs are scheduled by PDCCH the UL HARQ RTT timer length is set to 1 + RTToffset +deltaPDCCH subframes, where deltaPDCCH is the interval starting from the subframe following the last subframe of the PUSCH transmission plus 1 + RTToffset subframes to the first subframe of the next PDCCH occasion.
For HARQ processes scheduled using Short Processing Time (TS 36.331 [8]), the UL HARQ RTT Timer length is set to 3 subframes for FDD and for Frame Structure Type 3, and set to kULHARQRTT subframes for TDD, where kULHARQRTT equals the value indicated in Table 7.7-1 and Table 7.7-2.
For HARQ processes scheduled using short TTI (TS 36.331 [8]), the UL HARQ RTT Timer length is set to 8 TTIs if the TTI length is one slot or if proc-Timeline is set to n+4 set1, to 12 TTIs if proc-Timeline is set to n+6 set1 or n+6 set2 and to 16 TTIs if proc-Timeline is set to n+8 set2 for FDD and Frame Structure Type 3. For TDD short TTI the UL HARQ RTT Timer is set to kULHARQRTT TTIs, where kULHARQRTT equals the value indicated in Table 7.7-3, Table 7.7-4 and Table 7.7-5.
Table 7.7-1: kULHARQRTT for TDD Short Processing Time when special subframe configurations 0~9 is configured
|
TDD UL/DL |
subframe index n |
|||||||||
|
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
|
|
0 |
3 |
3 |
6 |
3 |
3 |
6 |
||||
|
1 |
3 |
3 |
3 |
3 |
||||||
|
2 |
3 |
3 |
||||||||
|
3 |
3 |
3 |
3 |
|||||||
|
4 |
3 |
3 |
||||||||
|
5 |
3 |
|||||||||
|
6 |
3 |
3 |
5 |
3 |
3 |
|||||
Table 7.7-2: kULHARQRTT for TDD Short Processing Time applied when special subframe configuration 10 is configured
|
TDD UL/DL |
subframe index n |
|||||||||
|
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
|
|
0 |
4 |
3 |
3 |
6 |
|
4 |
3 |
3 |
6 |
|
|
1 |
3 |
3 |
3 |
|
|
3 |
3 |
3 |
|
|
|
2 |
3 |
3 |
3 |
3 |
|
|||||
|
3 |
4 |
3 |
3 |
3 |
|
|||||
|
4 |
3 |
3 |
3 |
|
||||||
|
5 |
3 |
3 |
|
|||||||
|
6 |
4 |
3 |
3 |
5 |
3 |
3 |
3 |
|
||
Table 7.7-3: kULHARQRTT for TDD short TTI applied when special subframe configurations 1, 2, 3, 4, 6, 7 and 8 are configured
|
TDD UL/DL |
sTTI index n |
|||||||||||||||||||
|
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
|
|
0 |
6 |
5 |
4 |
4 |
4 |
4 |
6 |
5 |
4 |
4 |
4 |
4 |
||||||||
|
1 |
4 |
4 |
4 |
4 |
4 |
4 |
4 |
4 |
||||||||||||
|
2 |
4 |
4 |
4 |
4 |
||||||||||||||||
|
3 |
6 |
5 |
4 |
4 |
4 |
4 |
||||||||||||||
|
4 |
4 |
4 |
4 |
4 |
||||||||||||||||
|
5 |
4 |
4 |
||||||||||||||||||
|
6 |
6 |
5 |
4 |
4 |
4 |
4 |
4 |
4 |
4 |
4 |
||||||||||
Table 7.7-4: kULHARQRTT for TDD short TTI applied when special subframe configurations 0, 5 and 9 are configured
|
TDD UL/DL |
sTTI index n |
|||||||||||||||||||
|
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
|
|
0 |
6 |
5 |
4 |
4 |
4 |
11 |
6 |
5 |
4 |
4 |
4 |
11 |
||||||||
|
1 |
4 |
4 |
4 |
4 |
4 |
4 |
4 |
4 |
||||||||||||
|
2 |
4 |
4 |
4 |
4 |
||||||||||||||||
|
3 |
6 |
5 |
4 |
4 |
4 |
4 |
||||||||||||||
|
4 |
4 |
4 |
4 |
4 |
||||||||||||||||
|
5 |
4 |
4 |
||||||||||||||||||
|
6 |
6 |
5 |
4 |
4 |
4 |
9 |
4 |
4 |
4 |
4 |
||||||||||
Table 7.7-5: kULHARQRTT for TDD short TTI applied when special subframe configuration 10 is configured
|
TDD UL/DL |
sTTI index n |
|||||||||||||||||||
|
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
|
|
0 |
7 |
6 |
5 |
4 |
4 |
4 |
11 |
7 |
6 |
5 |
4 |
4 |
4 |
11 |
||||||
|
1 |
5 |
4 |
4 |
4 |
4 |
5 |
4 |
4 |
4 |
4 |
||||||||||
|
2 |
4 |
4 |
4 |
4 |
4 |
4 |
||||||||||||||
|
3 |
7 |
6 |
5 |
4 |
4 |
4 |
4 |
|||||||||||||
|
4 |
5 |
4 |
4 |
4 |
4 |
|||||||||||||||
|
5 |
4 |
4 |
4 |
|||||||||||||||||
|
6 |
7 |
6 |
5 |
4 |
4 |
4 |
9 |
5 |
4 |
4 |
4 |
4 |
||||||||
NOTE: RTToffset = 0 in terrestrial networks and RTToffset = UE-eNB RTT in Non-terrestrial networks.
7.8 DL_REPETITION_NUMBER value
The parameter DL_REPETITION_NUMBER value is received from lower layers and corresponds to the repetition level as specified in TS 36.213 [2].
7.9 UL_REPETITION_NUMBER value
The parameter UL_REPETITION_NUMBER value is received from lower layers and corresponds to the repetition level as specified in TS 36.213 [2].
Annex A (normative):
Handling of measurement gaps
In this specification, the subframes which cannot be used for transmission according to clause 8.1.2.1 of TS 36.133 [9] are also considered as part of measurement gaps in uplink. Measurement gaps are defined in TS 36.133 [9].
In a subframe that is part of a measurement gap, the UE shall not perform the transmission of HARQ feedback and CQI/PMI/RI/PTI/CRI, and SRS shall not be reported.
Annex B (normative):
Contention resolution for RACH access
When checking whether contention resolution was successful a MAC entity considers the MAC header structures shown below for the processing of a MAC PDU containing a UE Contention Resolution Identity MAC control element.
Figure B-1: MAC header structures containing a UE Contention Resolution Identity MAC control element
NOTE 1: For Case 1 (only Contention Resolution ID is carried), the resulting MAC PDU content is of fixed size and UE interprets the rest of MAC PDU data (if any) as padding without MAC subheader for padding.
NOTE 2: For Case 2 to Case 6, LCID of ‘00001’ is applicable only when UE supports the CIoT EPS User Plane optimisation.
NOTE 3: Case 7 and Case 8 are only applicable to EDT when the UE supports the CIoT EPS User Plane optimisation. For NB-IoT UE, n is 1 or 2. For BL UE or a UE in enhanced coverage, n is from 1 to 8.
NOTE 4: In Case 7, if n is 1, there is no L field after the subheader of MAC SDU for DTCH.
Annex C (informative):
Intended UE behaviour for DRX Timers
When a DRX timer is set to a value of X, and n denotes the subframe in which the related event is triggered according to the clause 5.7, the intended behaviours of each DRX timer are presented in the Table C-1 below:
Table C-1: Intended UE behaviour for DRX timers
|
DRX Timers |
Intended UE behaviour |
|
drx-InactivityTimer |
The MAC entity monitors PDCCH in PDCCH-subframes during the subframes [n+1, n+m]. The MAC entity starts or restarts drxShortCycleTimer, and uses Short DRX Cycle in the subframe n+m+1, if configured. |
|
drx-InactivityTimerSCPTM |
The MAC entity monitors PDCCH in PDCCH-subframes during the subframes [n+1, n+m]. |
|
mac-ContentionResolutionTimer or mac-ContentionResolutionTimer for the corresponding enhanced coverage level, if it exists |
The MAC entity monitors PDCCH in PDCCH-subframes during the subframes [n+1, n+X]. |
|
drx-RetransmissionTimer or drx-ULRetransmissionTimer |
The MAC entity monitors PDCCH in PDCCH-subframes during the subframes [n, n+m-1]. |
|
onDurationTimer or onDurationTimerSCPTM |
The MAC entity monitors PDCCH in PDCCH-subframes during the subframes [n, n+m-1]. |
|
drxShortCycleTimer |
The MAC entity uses the Short DRX Cycle during the subframes [n, n+X-1]. The MAC entity starts to use the Long DRX Cycle in the subframe n+X. |
|
HARQ RTT Timer |
The MAC entity starts drx-RetransmissionTimer in the subframe n+X, if needed. |
|
UL HARQ RTT Timer |
The MAC entity starts drx-ULRetransmissionTimer in the subframe n+X, if needed. |
|
NOTE 1: For FDD, m is equal to X; for TDD, m is equal to the minimum number of subframes so that X PDCCH-subframes are included during the subframes [x, y]. NOTE 2: A MAC entity configured with eIMTA monitors PDCCH in some subframe(s) in addition to PDCCH-subframes, as specified in clause 5.7. NOTE 3: For BL UE or UE in enhanced coverage, m is equal to the minimum number of subframes so that X PDCCH-subframes are included during the subframes [x, y]. |
|
For drx-InactivityTimerSCPTM, drx-InactivityTimer, drx-RetransmissionTimer and drx-ULRetransmissionTimer, if X=0, the timer does not make the MAC entity to monitor the PDCCH.
The intended UE behaviours in Table C-1 are not applicable for NB-IoT.
For NB-IoT, the intended UE behaviour regarding setting the HARQ RTT Timer is shown in Figure C-1 and for the UL HARQ RTT Timer is shown in Figure C-2.
Figure C-1: Setting the HARQ RTT Timer for NB-IoT
Figure C-2: Setting the UL HARQ RTT Timer for NB-IoT
NOTE: UE-eNB RTT is taken into account when calculating the (UL) HARQ RTT timer.
Annex D (normative):
List of CRs Containing Early Implementable Features and Corrections
This annex lists the Change Requests (CRs) whose changes may be implemented by a UE of an earlier release than which the CR was approved in (i.e. CRs that contain on their coversheets the sentence "Implementation of this CR from Rel-N will not cause interoperability issues").
Table D-1: List of CRs Containing Early Implementable Features and Corrections
|
TDoc Number (RP-xxxxxx): CR Title |
CR Number(s) |
CR Revision Number(s) |
Earliest Implementable Release |
Additional Information |
|
RP-181232: Clarifying PDCCH Period Definition |
1300 |
2 |
Release 13 |
|
|
RP-181961: Defining PDCCH-Subframes for NB-IoT UE |
1327 |
1 |
Release 13 |
|
|
RP-191385: Clarification of Length field for DPR |
1450 |
1 |
Release 13 |
|
|
RP-192941: Clarification of PDCCH monitoring when not fully aligned with PDCCH periods |
1459 |
2 |
Release 13 |
|
|
RP-210700: Recommended bit rate query handling at MAC reset |
1521 |
1 |
Release 14 |
|
|
RP-220472: Introduction of carrier specific NRSRP thresholds for NPRACH resource selection |
1535 |
1 |
Release 14 |
|
|
NOTE 1: In case a CR has mirror CR(s), the mirror CR(s) are not listed. NOTE 2: The Additional Information column briefly describes the content of a CR in cases where the CR title may not be descriptive enough. If the CR is descriptive enough, then the Additional Information column may be left blank. |
||||
Annex E (informative):
Change history
|
Change history |
|||||||
|
Date |
TSG # |
TSG Doc. |
CR |
Rev |
Cat |
Subject/Comment |
New version |
|
2007-06 |
RAN2#58bis |
R2-072710 |
MAC Protocol Specification Baseline |
||||
|
2007-06 |
RAN2#58bis |
R2-072912 |
Text Proposal for UL HARQ (Tdoc R2-072708) Text Proposal for DL HARQ (Tdoc R2-072707) Text Proposal for RACH procedure (Tdoc R2-072640) Text Proposal for Logical Channel prioritization (Tdoc R2-072643) |
0.1.0 |
|||
|
2007-06 |
RAN2#58bis |
R2-072994 |
Basic MAC PDU structure (Tdoc R2-072983) with updates Agreements on time-frequency resource configuration (Tdoc R2-072993) Agreement on RA-RNTI association (Tdoc R2-072993) Clarification on RA Response reception (Tdoc R2-072993) |
0.1.1 |
|||
|
2007-08 |
RAN2#59 |
R2-073715 |
Removed reference to non-existing table (Tdoc R2-073473) Incorrect mapping of logical to transport channel (Tdoc R2-073473) Un-necessary error checking in HARQ process procedure (Tdoc R2-073473) Removal of reference to timing relation for HARQ feedback (Tdoc R2-073473) Correction of Internal variable name (Tdoc R2-073473) Correction of procedure in case of successful HARQ reception (Tdoc R2-073473) |
0.2.0 |
|||
|
2007-09 |
RAN2#59 |
R2-073885 |
Text proposal for Random Access procedure Text proposal on HARQ clarification for TDD Text proposal on HARQ for grants |
0.2.1 |
|||
|
2007-09 |
RAN#37 |
RP-070688 |
Clean version for information |
1.0.0 |
|||
|
2007-10 |
RAN2#59bis |
R2-074530 |
Editorial update with Editor’s notes (Tdoc R2-074211). |
1.1.0 |
|||
|
2007-11 |
RAN2#60 |
R2-075093 |
Agreements on MAC PDU format (R2-074536) Corrections on Random Access Procedure (R2-074536) |
1.1.1 |
|||
|
2007-11 |
RAN2#60 |
R2-075243 |
Endorsement of v1.1.1 Removal of FFS on DL CCCH existence |
1.2.0 |
|||
|
2007-11 |
RAN2#60 |
R2-075488 |
Agreement on identity used Random Access Response (R2-075038) Agreement on Local Nack1 (R2-074949) PUCCH Resource handling (R2-075432) UL HARQ agreements (R2-075432) Agreements on semi-persistent scheduling (R2-075432, 36.300) Agreements on BSR/SR triggers (R2-075432) Agreements on BSR contents (R2-075432) Agreements on Timing Advance principles (36.300) Agreements on DRX control (36.300) Handling of P-BCH, D-BCH, PCH (R2-075246) |
1.3.0 |
|||
|
2007-11 |
RP-38 |
RP-070917 |
Clean version, presented at TSG RAN-38 for approval |
2.0.0 |
|||
|
2007-12 |
RP-38 |
– |
Approved at TSG RAN-38 and placed under change control |
8.0.0 |
|||
|
2008-03 |
RP-39 |
RP-080162 |
0001 |
2 |
CR to 36.321 with E-UTRA MAC protocol specification update |
8.1.0 |
|
|
2008-05 |
RP-40 |
RP-080410 |
0002 |
1 |
36.321 CR covering agreements of RAN2 #61bis and RAN2#62 |
8.2.0 |
|
|
2008-09 |
RP-41 |
RP-080690 |
0003 |
– |
Clarification on data available for transmission for BSR triggering |
8.3.0 |
|
|
RP-41 |
RP-080690 |
0004 |
– |
CR to 36.321 on failure indication after maximum number of HARQ transmissions |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0005 |
4 |
Clarifications and Corrections of DL and UL Data Transfer (SCH, RACH and SR) |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0006 |
– |
CR to 36.321 on Buffer size levels for BSR |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0007 |
– |
Clarifications on DRX |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0008 |
– |
Clarification on UE behavior for DRX and configured measurement gaps |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0009 |
3 |
Correction to MAC Padding BSR |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0010 |
– |
Correction to UE transmission power headroom report for LTE |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0011 |
– |
Corrections on BSR |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0012 |
– |
CR to 36.321 REL-8 on Format of UL grant in Message 2 |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0015 |
– |
CR to 36.321 REL-8 on PUSCH PUCCH Power Control RNTIs |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0016 |
– |
CR to 36.321 REL-8 on RACH uniform random backoff |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0017 |
1 |
E-UTRA MAC protocol specification update |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0020 |
– |
TP for number of HARQ processes and MIMO |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0022 |
– |
Update of MAC dedicated preamble expiry |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0027 |
– |
Handling of Semi-Persistent grants and assignments |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0051 |
1 |
Corrections relating to RACH |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0058 |
1 |
UL Channel Prioritisation |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0071 |
2 |
Corrections relating to RACH partitioning |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0091 |
– |
Correction on Random Access Response reception behaviour |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0103 |
– |
Upper limit of logical channel id |
8.3.0 |
||
|
RP-41 |
RP-080690 |
0104 |
– |
Clarifications and Corrections for HARQ operation at TAT expiry and RACH contention resolution |
8.3.0 |
||
|
2008-12 |
RP-42 |
RP-081018 |
0105 |
– |
CR0105 to 36.321 [Rel-8] on PHR Periodic Timer Start |
8.4.0 |
|
|
RP-42 |
RP-081018 |
0106 |
1 |
Proposed R1 of CR0106 to 36.321 [Rel-8] on PHR Reference |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0107 |
1 |
CR 0107 to 36.321 Interactions between measurement gap and Msg3 transmission |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0108 |
2 |
Proposed R1 of CR0108 to 36.321 [Rel-8] on PHR Reporting Values |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0109 |
– |
Correction relating to equal priorities |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0110 |
– |
CR 0110 to 36.321 on Correction to PHR |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0112 |
1 |
CR0112r1 to 36.321 [Rel-8] Correction to BCCH Reception procedure |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0113 |
– |
Contention Resolution Timer |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0114 |
– |
PCH reception |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0115 |
– |
Correction to reception of assignments and grants |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0116 |
– |
Correction on Contention Resolution |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0117 |
2 |
Proposed R1 of CR0117 to 36.321 [Rel-8] on on SR Clarifications and Repetitions |
8.4.0 |
||
|
RP-42 |
RP-081078 |
0118 |
2 |
Clarification on Padding value |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0119 |
– |
CR 0119 to 36.321 Correction and Clarification on TTI Bundling |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0120 |
1 |
Clarification of DRX Active Time |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0121 |
4 |
Text Proposal for Dedicated Preamble Assignment |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0122 |
– |
CR0122 to 36.321 [Rel-8] on Message 3 Definition |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0123 |
1 |
Correction to prevent wrong contention resolution by adaptive retransmission command |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0124 |
– |
Bucket Size Parameter |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0125 |
2 |
CR0125r2 to 36.321 [Rel-8] Correction to Multiple BSR |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0127 |
– |
CR0127 to 36.321 [Rel-8] RACH preambles labelling |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0128 |
1 |
CR0128r1 to 36.321 [Rel-8] merging CR0126r0 and CR0128r0 |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0129 |
1 |
CR0129r1 to 36.321 [Rel-8] Correction to PDU Format |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0130 |
– |
CQI/ SRS/PMI/RI transmission during active time |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0131 |
1 |
NDI and Msg4 Carrying Contention Resolution ID |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0132 |
1 |
CR0132 to 36.321 [Rel-8] on MAC BSR trigger |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0133 |
– |
Clarification about Restarting the Periodic BSR Timer |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0134 |
– |
Correction to RA procedure initiated by eNB PDCCH order |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0135 |
1 |
Correction on PHR triggering condition |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0136 |
– |
CR 0136 to 36.321 on Correction to UL HARQ Process for the transmission of Msg3 |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0137 |
2 |
SPS occasions |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0138 |
– |
Robustness of Buffer Status Reporting |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0139 |
– |
Proposed CR to 36.321 [Rel-8] on UL HARQ and Measurement Gaps |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0142 |
1 |
TAT and RACH procedure |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0143 |
1 |
SRS and CQI Resources Release upon TAT Expiry |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0157 |
1 |
Proposed CR to 36.321 Correction to RACH procedure |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0162 |
1 |
BSR format for reporting empty buffers |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0165 |
– |
TTI Bundling Configuration |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0166 |
1 |
Corrections to semi-persistent scheduling |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0167 |
2 |
Priotitization of MAC control elements |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0168 |
– |
Correction to starting of TA timer |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0173 |
1 |
Proposed CR to 36.321 SPS implicit release on UL |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0174 |
– |
Proposed CR to 36.321 Measurement gaps and SPS |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0175 |
– |
Proposed CR to 36.321 Setting reserved bits to zero |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0185 |
– |
Proposed CR to 36.321 [Rel-8] MAC ResetReconfig Option 2 |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0188 |
2 |
RV setting |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0189 |
– |
Corrections to Random Access Procedure |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0198 |
– |
Number of HARQ processes for MIMO |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0201 |
– |
Corrections to power control and random access |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0206 |
– |
Correction on the definition of the PDCCH-subframe |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0211 |
1 |
Correction to the coexist of SPS-RNTI and SI-RNTI or RA-RNTI |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0220 |
– |
Explicit release of SPS |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0225 |
2 |
Linking HARQ process ID with the SPS resource |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0231 |
– |
Bucket Parameter Update |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0232 |
1 |
Clarification on "PDCCH indicates a new transmission" for DRX |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0233 |
1 |
Editorial corrections to MAC |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0236 |
– |
RB suspension and BSR contents |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0239 |
– |
RV setting |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0240 |
2 |
Preamble group selection |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0241 |
– |
Use of dedicated preambles after HO complete |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0242 |
– |
Introduction of HARQ RTT Timer |
8.4.0 |
||
|
RP-42 |
RP-081018 |
0243 |
– |
Correction to DRX configuration |
8.4.0 |
||
|
2009-03 |
RP-43 |
RP-090128 |
0245 |
– |
CR to 36.321 on BSR clarification |
8.5.0 |
|
|
RP-43 |
RP-090128 |
0246 |
2 |
Freeing of reserved RNTIs |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0247 |
– |
Correction to MAC reset |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0248 |
– |
Correction to Initialization of Prioritization |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0249 |
– |
Local NACKing Optionality MAC CR |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0250 |
1 |
Position of the Backoff Indicator subheader |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0251 |
– |
Missing reserved bit setting |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0252 |
– |
Expired TAT and PUSCH transmission |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0253 |
– |
Expired TAT and HARQ feedback |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0254 |
1 |
Counter proposal to R2-090969 on Management for HARQ buffer with TAT |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0255 |
– |
HARQ Feedback and Contention Resolution |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0256 |
– |
Corrections to redundancy version control for system information |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0257 |
– |
Mapping of the RNTIs to different transport channels |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0258 |
– |
DRX and UL Retransmissions |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0259 |
– |
Definition of DRX Short Cycle Timer |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0260 |
– |
Small corrections to RACH |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0261 |
– |
Processing of contention resolution message |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0262 |
– |
Corrections to power control and random access |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0263 |
– |
Missing condition for unsuccessful reception of Msg2 |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0264 |
1 |
Corrections relating to Random Access required inputs |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0265 |
– |
Bucket Parameter Update |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0266 |
2 |
Correction to Handling of triggered PHR |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0267 |
– |
SPS resource release on D-SR failure |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0269 |
2 |
NDI handling when measurement gap and SPS occassion collide |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0270 |
– |
Correction relating to PDCCH order |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0271 |
– |
Error Handling |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0272 |
– |
Various clarifications/corrections to TS36.321 |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0273 |
1 |
Disassembly, Demultiplexing and Multiplexing functions |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0274 |
1 |
Miscellaneous corrections to MAC |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0275 |
2 |
CR on Interactions between Msg3 transmission and TTI bundling |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0276 |
– |
TTI Bundling |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0278 |
1 |
Correction to BSR trigger at serving cell change |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0279 |
1 |
Correction to Release of SPS |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0280 |
2 |
Usage of RRC Parameters |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0281 |
– |
Clarification of MAC Timer status |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0282 |
1 |
Correction on MAC PDU subheader description |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0283 |
1 |
UE behaviour at CURRENT_TX_NB reaches maximum value |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0285 |
– |
Reporting During DRX |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0289 |
– |
NDI handling after random access procedure |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0290 |
1 |
Dedicated preamble handling after random access failure |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0292 |
– |
NDI and grant in Message 2 |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0293 |
1 |
Correction relating to BCCH HARQ |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0300 |
1 |
Corrections to Msg3 definition and usage |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0303 |
– |
PRACH selection must use prach-ConfigurationIndex |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0305 |
– |
Clarification on RETX_BSR_TIMER |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0307 |
3 |
MAC Structure in UE Side |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0308 |
– |
Clarification on Random Access Procedure |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0314 |
– |
Clarification on the CR timer |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0316 |
– |
Correction on BSR |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0318 |
1 |
Clarification on MAC reconfiguration of timers and counters |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0320 |
– |
HARQ feedback, CQI/PMI/RI and SRS transmissions and measurement gaps |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0324 |
– |
MAC PDU subheader corresponding to padding |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0333 |
– |
CR On Backoff table |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0334 |
3 |
TTI Bundling Operation |
8.5.0 |
||
|
RP-43 |
RP-090128 |
0341 |
1 |
Enforcing new transmission after flushing HARQ process |
8.5.0 |
||
|
2009-06 |
RP-44 |
RP-090513 |
0342 |
– |
Correction on HARQ feedback transmission |
8.6.0 |
|
|
RP-44 |
RP-090513 |
0343 |
1 |
Clarification on the DL assignment/UL grant reception in SPS |
8.6.0 |
||
|
RP-44 |
RP-090513 |
0344 |
1 |
PHR timer handling after handover |
8.6.0 |
||
|
RP-44 |
RP-090513 |
0346 |
2 |
MAC PDU for Msg2 |
8.6.0 |
||
|
RP-44 |
RP-090513 |
0347 |
2 |
MAC Error handling |
8.6.0 |
||
|
RP-44 |
RP-090513 |
0348 |
– |
Correction on SR cancellation |
8.6.0 |
||
|
RP-44 |
RP-090513 |
0349 |
1 |
Correction to RETX_BSR_TIMER |
8.6.0 |
||
|
RP-44 |
RP-090513 |
0350 |
1 |
CR to 36.321 on UL SPS Implicit Release |
8.6.0 |
||
|
RP-44 |
RP-090513 |
0351 |
2 |
Various correction to MAC |
8.6.0 |
||
|
RP-44 |
RP-090513 |
0369 |
– |
Correction to Uplink grant by temporary C-RNTI |
8.6.0 |
||
|
RP-44 |
RP-090513 |
0370 |
– |
Clarification on simultaneous reception of RA-RNTI and C-RNTI |
8.6.0 |
||
|
RP-44 |
RP-090513 |
0374 |
– |
Correction on timeAlignmentTimer validity in MAC |
8.6.0 |
||
|
RP-44 |
RP-090513 |
0376 |
1 |
CR for MAC padding |
8.6.0 |
||
|
RP-44 |
RP-090513 |
0377 |
– |
Correction to duplicate reception of TA command (2nd method) |
8.6.0 |
||
|
2009-09 |
RP-45 |
RP-090906 |
0379 |
– |
Correction to NDI semantics |
8.7.0 |
|
|
RP-45 |
RP-090906 |
0380 |
1 |
Minor corrections to 36.321 |
8.7.0 |
||
|
RP-45 |
RP-090906 |
0381 |
2 |
UE behaviour when MBSFN subframe and a configured downlink assignment collide |
8.7.0 |
||
|
RP-45 |
RP-090906 |
0399 |
– |
Correction to HARQ process ID for DL SPS retransmissions |
8.7.0 |
||
|
2009-09 |
RP-45 |
RP-090934 |
0390 |
3 |
Improvement of cancellation of SR |
9.0.0 |
|
|
RP-45 |
RP-090934 |
0396 |
– |
Periodic CQI/PMI/RI masking |
9.0.0 |
||
|
2009-12 |
RP-46 |
RP-091341 |
0401 |
2 |
Capturing MBMS agreements in MAC |
9.1.0 |
|
|
RP-46 |
RP-091314 |
0403 |
2 |
Clarification on BSR trigger |
9.1.0 |
||
|
RP-46 |
RP-091346 |
0404 |
– |
Correction on HARQ Process ID for DL SPS and DRX |
9.1.0 |
||
|
RP-46 |
RP-091314 |
0406 |
– |
RNTI for CCCH |
9.1.0 |
||
|
RP-46 |
RP-091346 |
0407 |
1 |
SR prohibit mechanism for UL SPS |
9.1.0 |
||
|
RP-46 |
RP-091346 |
0409 |
– |
Clarification on monitoring of PDCCH |
9.1.0 |
||
|
RP-46 |
RP-091346 |
0410 |
– |
Introduction of SR prohibit timer |
9.1.0 |
||
|
2010-03 |
RP-47 |
RP-100305 |
0414 |
– |
Correction to MBMS scheduling terminology |
9.2.0 |
|
|
RP-47 |
RP-100305 |
0415 |
– |
Corrections to TS 36.321 on MBMS |
9.2.0 |
||
|
RP-47 |
RP-100305 |
0421 |
1 |
Error handling for MBMS PDU |
9.2.0 |
||
|
RP-47 |
RP-100308 |
0422 |
– |
Renaming CR as consequence of ASN.1 review |
9.2.0 |
||
|
2010-06 |
RP-48 |
RP-100536 |
0424 |
– |
Clarification on UE behaviour w.r.t DRX cycle change and onDurationTimer test (Procedural change) |
9.3.0 |
|
|
RP-48 |
RP-100554 |
0425 |
1 |
Correction to MBMS description |
9.3.0 |
||
|
RP-48 |
RP-100556 |
0426 |
– |
Correction to PHR triggering |
9.3.0 |
||
|
RP-48 |
RP-100536 |
0430 |
– |
Processing of contention resolution message |
9.3.0 |
||
|
2010-12 |
RP-50 |
RP-101226 |
0436 |
2 |
Introduction of Carrier Aggregation |
10.0.0 |
|
|
RP-50 |
RP-101228 |
0437 |
1 |
Introduction of relays in MAC |
10.0.0 |
||
|
RP-50 |
RP-101225 |
0447 |
– |
HARQ operation for UL multiple antenna transmission |
10.0.0 |
||
|
2011-03 |
RP-51 |
RP-110280 |
0449 |
– |
PHR Trigger for Power Reduction Due to Power Management |
10.1.0 |
|
|
RP-51 |
RP-110289 |
0450 |
1 |
Power Headroom Reporting |
10.1.0 |
||
|
RP-51 |
RP-110289 |
0451 |
– |
Cancellation of BSR |
10.1.0 |
||
|
RP-51 |
RP-110289 |
0453 |
1 |
Counterproposal to Corrections to the Carrier Aggregation functionality in MAC |
10.1.0 |
||
|
RP-51 |
RP-110280 |
0454 |
– |
Adding a Power Management indication in PHR |
10.1.0 |
||
|
RP-51 |
RP-110289 |
0457 |
2 |
CR on SCell Activation |
10.1.0 |
||
|
RP-51 |
RP-110289 |
0461 |
2 |
Unification of Extended PHR MAC CE formats |
10.1.0 |
||
|
RP-51 |
RP-110289 |
0465 |
1 |
Clarification for CA and TTI bundling in MAC |
10.1.0 |
||
|
2011-06 |
RP-52 |
RP-110846 |
0466 |
– |
CQI reporting and deactivation timer |
10.2.0 |
|
|
RP-52 |
RP-110846 |
0467 |
2 |
Miscellaneous Corrections |
10.2.0 |
||
|
RP-52 |
RP-110846 |
0468 |
– |
Pcmax,c reporting for type 2 PH |
10.2.0 |
||
|
RP-52 |
RP-110848 |
0469 |
– |
Type-1-triggered SRS transmission independent of DRX |
10.2.0 |
||
|
RP-52 |
RP-110839 |
0470 |
– |
UL transmissions when the timeAlignmentTimer is not running |
10.2.0 |
||
|
RP-52 |
RP-110846 |
0478 |
1 |
Clarifications to Ci field in MAC CE on CA |
10.2.0 |
||
|
RP-52 |
RP-110846 |
0488 |
– |
Clarification of padding BSR behaviour |
10.2.0 |
||
|
RP-52 |
RP-110834 |
0489 |
– |
SPS reception in MBSFN subframes |
10.2.0 |
||
|
RP-52 |
RP-110839 |
0490 |
– |
Power management related PHR triggering condition |
10.2.0 |
||
|
RP-52 |
RP-110839 |
0491 |
– |
Clarifications on PHR Power Management trigger |
10.2.0 |
||
|
2011-09 |
RP-53 |
RP-111280 |
0494 |
1 |
Clarifications on MCH reception and Stop MTCH |
10.3.0 |
|
|
RP-53 |
RP-111283 |
0496 |
– |
Configuration of extenededBSR-sizes |
10.3.0 |
||
|
RP-53 |
RP-111297 |
0502 |
– |
CR to 36.321 on Small correction of PHR parameter |
10.3.0 |
||
|
RP-53 |
RP-111283 |
0503 |
1 |
Corrections to PCMAX,c field in Extended PHR |
10.3.0 |
||
|
2011-12 |
RP-54 |
RP-111714 |
0516 |
1 |
UE soft buffer handling in MAC |
10.4.0 |
|
|
RP-54 |
RP-111716 |
0523 |
– |
Correction on determining SPS occasions |
10.4.0 |
||
|
RP-54 |
RP-111605 |
0526 |
1 |
CSI/SRS reporting at DRX state transitions |
10.4.0 |
||
|
RP-54 |
RP-111606 |
0527 |
– |
CSI/SRS reporting at unexpected Active Time stopping |
10.4.0 |
||
|
2012-03 |
RP-55 |
RP-120321 |
0539 |
– |
Correction to multiplexing and assembly |
10.5.0 |
|
|
2012-09 |
RP-57 |
RP-121395 |
0559 |
– |
P bit in Extended PHR MAC CE |
10.6.0 |
|
|
RP-57 |
RP-121395 |
0577 |
1 |
Deadlock of PHR transmission |
10.6.0 |
||
|
RP-57 |
RP-121382 |
0558 |
– |
Clarification on Measurement Gap |
11.0.0 |
||
|
RP-57 |
RP-121377 |
0572 |
1 |
Introduction of CA Enhancements in MAC |
11.0.0 |
||
|
RP-57 |
RP-121382 |
0581 |
– |
Clarification of TA value maintenance at TA timer expiry |
11.0.0 |
||
|
2012-12 |
RP-58 |
RP-121936 |
0583 |
– |
Clarification on DRX for Relay |
11.1.0 |
|
|
RP-58 |
RP-121936 |
0585 |
– |
Clarification on V field in Extended PHR MAC CE |
11.1.0 |
||
|
RP-58 |
RP-121951 |
0586 |
1 |
Clarification related to CA enhancement in MAC |
11.1.0 |
||
|
RP-58 |
RP-121957 |
0588 |
– |
Clarification of the Note in 5.2 |
11.1.0 |
||
|
RP-58 |
RP-121951 |
0590 |
– |
TAG Acronym |
11.1.0 |
||
|
RP-58 |
RP-121951 |
0594 |
– |
Corrections for CA-enhancement in MAC |
11.1.0 |
||
|
RP-58 |
RP-121956 |
0599 |
– |
CR on MAC layer support of ePDCCH |
11.1.0 |
||
|
RP-58 |
RP-121957 |
0624 |
2 |
CR to 36.321 on Annex for DRX Timers |
11.1.0 |
||
|
2013-03 |
RP-59 |
RP-130248 |
0629 |
2 |
Removing optionality on CSI/SRS transmission during transient state |
11.2.0 |
|
|
RP-59 |
RP-130245 |
0630 |
– |
Clarification on the PDCCH-subframe for half-duplex TDD UE |
11.2.0 |
||
|
RP-59 |
RP-130248 |
0649 |
– |
Draft CR to 36 321 for Clarification of PDCCH-subframe definition in Rel-11 |
11.2.0 |
||
|
RP-59 |
RP-130241 |
0659 |
– |
Correction for TM10 unicast support in MBSFN subframes |
11.2.0 |
||
|
RP-59 |
RP-130291 |
0661 |
– |
Clarification of DRX timers for TDD |
11.2.0 |
||
|
2013-06 |
RP-60 |
RP-130805 |
0663 |
2 |
HARQ RTT Timer |
11.3.0 |
|
|
RP-60 |
RP-130808 |
0664 |
– |
Clarification on the PDCCH-subframe definition for TDD UE |
11.3.0 |
||
|
RP-60 |
RP-130809 |
0665 |
– |
Correction to the definition of drxRetransmissionTimer |
11.3.0 |
||
|
RP-60 |
RP-130809 |
0667 |
– |
Further issues on removing optionality of CSI/SRS transmission during transient state |
11.3.0 |
||
|
RP-60 |
RP-130804 |
0670 |
– |
Rel-11 CR on SCell activation timing |
11.3.0 |
||
|
2013-12 |
RP-62 |
RP-131989 |
0687 |
– |
Clarification on the HARQ feedback for SCell activation/deactivation command MAC CE |
11.4.0 |
|
|
RP-62 |
RP-132002 |
0690 |
– |
Clarification on Power Headroom MAC CE |
12.0.0 |
||
|
2014-03 |
RP-63 |
RP-140355 |
0709 |
– |
BCCH reception for MBMS on any configured or configurable SCell |
12.1.0 |
|
|
RP-63 |
RP-140362 |
0705 |
1 |
Long DRX Command MAC Control Element |
12.1.0 |
||
|
2014-06 |
RP-64 |
RP-140888 |
0714 |
– |
Alternative 1: Introduction of FDD/TDD CA into 36.321 |
12.2.0 |
|
|
RP-64 |
RP-140884 |
0713 |
1 |
Introduction of TDD eITMA |
12.2.0 |
||
|
RP-64 |
– |
– |
– |
Editorial updates |
12.2.1 |
||
|
2014-09 |
RP-65 |
RP-141506 |
0732 |
1 |
Introduction of low complexity UEs in TS 36.321 |
12.3.0 |
|
|
2014-12 |
RP-66 |
RP-142129 |
0739 |
– |
Category 0 report in Msg3 |
12.4.0 |
|
|
RP-66 |
RP-142140 |
0749 |
– |
Correction on DRX Operation |
12.4.0 |
||
|
RP-66 |
RP-142140 |
0748 |
– |
Prohibit timer for SR |
12.4.0 |
||
|
RP-66 |
RP-142135 |
0740 |
1 |
Introduction of dual connectivity in MAC |
12.4.0 |
||
|
2015-03 |
RP-67 |
RP-150373 |
0751 |
– |
Clarification on the Logical channel prioritization in DC |
12.5.0 |
|
|
RP-67 |
RP-150375 |
0762 |
1 |
Introduction of MBMS congestion management for Public Safety Group Call |
12.5.0 |
||
|
RP-67 |
RP-150374 |
0755 |
1 |
Introduction of ProSe in MAC |
12.5.0 |
||
|
RP-67 |
RP-150371 |
0763 |
2 |
Uplink transmission time difference |
12.5.0 |
||
|
2015-06 |
RP-68 |
RP-150921 |
0764 |
– |
SL-DCH transmission for autonomous resource allocation mode |
12.6.0 |
|
|
RP-68 |
RP-150921 |
0766 |
– |
Minor corrections for ProSe |
12.6.0 |
||
|
RP-68 |
RP-150921 |
0767 |
– |
Clarification on deactivation operation |
12.6.0 |
||
|
RP-68 |
RP-150916 |
0768 |
– |
Handling of erroneous PDU on MCH |
12.6.0 |
||
|
RP-68 |
RP-150921 |
0769 |
– |
Corrections on 36.321 for ProSe |
12.6.0 |
||
|
RP-68 |
RP-150921 |
0772 |
– |
Correction to the figure of MAC structure overview for sidelink |
12.6.0 |
||
|
RP-68 |
RP-150923 |
0782 |
– |
Prohibit timer for SR |
12.6.0 |
||
|
RP-68 |
RP-150921 |
0783 |
– |
Resource selection for SL-DCH |
12.6.0 |
||
|
2015-09 |
RP-69 |
RP-151438 |
0799 |
1 |
Correction on Type 2 PH reporting |
12.7.0 |
|
|
RP-69 |
RP-151441 |
0795 |
1 |
Corrections for reporting and cancellation of SL BSR |
12.7.0 |
||
|
RP-69 |
RP-151441 |
0785 |
1 |
Corrections to Sidelink in MAC |
12.7.0 |
||
|
RP-69 |
RP-151441 |
0790 |
1 |
Miscellaneous corrections on Sidelink |
12.7.0 |
||
|
2015-12 |
RP-70 |
RP-152055 |
0801 |
– |
Correction on transparent MAC PDU |
12.8.0 |
|
|
RP-70 |
RP-152053 |
0802 |
– |
Correction on MAC header for SL-SCH |
12.8.0 |
||
|
RP-70 |
RP-152053 |
0805 |
– |
Corrections for sidelink in TS 36.321 |
12.8.0 |
||
|
2015-12 |
RP-70 |
RP-152071 |
0811 |
2 |
Introduction of Carrier Aggregation enhancements beyond 5 CCs |
13.0.0 |
|
|
RP-70 |
RP-152072 |
0806 |
2 |
Introduction of eD2D |
13.0.0 |
||
|
RP-70 |
RP-152078 |
0821 |
2 |
Introduction of LAA in MAC |
13.0.0 |
||
|
RP-70 |
RP-152080 |
0815 |
2 |
Introduction of SC-PTM in MAC |
13.0.0 |
||
|
2016-03 |
RP-71 |
RP-160470 |
0825 |
1 |
Power headroom reporting of carrier aggregation enhancement beyond 5 CCs |
13.1.0 |
|
|
RP-71 |
RP-160454 |
0837 |
1 |
Corrections for sidelink |
13.1.0 |
||
|
RP-71 |
RP-160462 |
0844 |
– |
Correction to Pcmax and PH field in PHR MAC CE |
13.1.0 |
||
|
RP-71 |
RP-160453 |
0845 |
2 |
Introduction of low complexity UE and enhanced coverage features |
13.1.0 |
||
|
RP-71 |
RP-160467 |
0852 |
– |
Maximum UL Transmission timing difference in dual connectivity |
13.1.0 |
||
|
RP-71 |
RP-160470 |
0853 |
1 |
Corrections on SC-PTM MAC specification |
13.1.0 |
||
|
2016-06 |
RP-72 |
RP-161080 |
0854 |
– |
Corrections to MTCe in TS 36.321 |
13.2.0 |
|
|
RP-72 |
RP-161080 |
0855 |
1 |
Corrections to Logical Channel Prioritisation |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0856 |
– |
Correction to MAC procedures for MTC |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0857 |
3 |
Functional extension for U-plane C-IoT optimisation |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0858 |
2 |
Corrections for sidelink logical channel prioritization |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0859 |
– |
HARQ RTT Timers in eMTC |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0860 |
– |
Asynchronous UL HARQ protocol operation |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0861 |
1 |
UL SPS and Sidelink discovery gap |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0862 |
– |
Correction of BCCH reception for LC-MTC |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0864 |
1 |
Corrections on asynchronous UL HARQ operation |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0866 |
– |
Clarification on PDCCH sub-frame for SC-PTM |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0867 |
– |
Correction on preamble group selection and RA-RNTI value range |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0868 |
1 |
Correction on DL HARQ retransmission and UL transmission repetitions within a bundle |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0869 |
2 |
Correction on IR version for UL HARQ |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0870 |
– |
Correction on HARQ process selection for UL asynchronous HARQ |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0873 |
– |
Correction to eMTC message classes and logical channels |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0875 |
– |
Correction on Random Access CE-level ramp-up for CE mode A UEs |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0876 |
1 |
Correction to random access procedure for eMTC |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0877 |
2 |
Minor corrections to MAC for eMTC |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0878 |
– |
PRACH preamble power for eMTC |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0879 |
1 |
SPS support for eMTC UEs |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0880 |
1 |
SR prohibit timer for eMTC UEs |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0881 |
– |
Starting CE level for PDCCH order and HO |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0882 |
– |
Clarification on RA-RNTI determination for PRACH in TDD |
13.2.0 |
||
|
RP-72 |
RP-161081 |
0883 |
4 |
Introduction of NB-IoT to 36.321 |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0884 |
2 |
Correction on the DRX operation for UL asynchronous HARQ |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0885 |
– |
Corrections on Support of CRI reporting in MAC |
13.2.0 |
||
|
RP-72 |
RP-161080 |
0886 |
– |
Correction on the intended UE behaviour for DRX Timers |
13.2.0 |
||
|
2016-09 |
RP-73 |
RP-161752 |
0887 |
1 |
Corrections to Destination Indexing |
13.3.0 |
|
|
RP-73 |
RP-161755 |
0888 |
2 |
Clarification on BCCH reception for eMTC |
13.3.0 |
||
|
RP-73 |
RP-161762 |
0889 |
1 |
Clarification on DRX in SC-PTM |
13.3.0 |
||
|
RP-73 |
RP-161753 |
0893 |
– |
DRX operation for LAA cells |
13.3.0 |
||
|
RP-73 |
RP-161752 |
0901 |
2 |
Correction to Sidelink Discovery Gap for Transmission |
13.3.0 |
||
|
RP-73 |
RP-161755 |
0902 |
1 |
Clarification on RA preamble groups for eMTC |
13.3.0 |
||
|
RP-73 |
RP-161758 |
0907 |
2 |
Correction on MAC procedure and DRX related issues |
13.3.0 |
||
|
RP-73 |
RP-161758 |
0917 |
2 |
Clarification of the Random Access procedure for NB-IoT |
13.3.0 |
||
|
RP-73 |
RP-161758 |
0918 |
2 |
onDurationTimer start for NB-IoT |
13.3.0 |
||
|
RP-73 |
RP-161755 |
0921 |
– |
Repetition transmissions within a bundle in DL for MTC |
13.3.0 |
||
|
2016-09 |
RP-73 |
RP-161747 |
0920 |
– |
Introduction of L2 Latency reduction techniques |
14.0.0 |
|
|
RP-73 |
RP-161745 |
0922 |
– |
Introducing eLAA in MAC |
14.0.0 |
||
|
RP-73 |
RP-161746 |
0923 |
1 |
Support for V2V services based on LTE sidelink |
14.0.0 |
||
|
2016-12 |
RP-74 |
RP-162314 |
0924 |
– |
Correction to MAC RAR |
14.1.0 |
|
|
RP-74 |
RP-162314 |
0929 |
– |
Clarification on NB-IoT |
14.1.0 |
||
|
RP-74 |
RP-162315 |
0931 |
1 |
Clarification on SC-PTM reception |
14.1.0 |
||
|
RP-74 |
RP-162317 |
0933 |
– |
Clarification on HARQ feedback on PSCell and PUCCH SCell |
14.1.0 |
||
|
RP-74 |
RP-162328 |
0947 |
– |
Miscellaneous corrections for V2V in TS 36.321 |
14.1.0 |
||
|
RP-74 |
RP-162313 |
0950 |
1 |
Correction on mac-ContentionResolutionTimer for eMTC and NB-IoT |
14.1.0 |
||
|
RP-74 |
RP-162313 |
0952 |
– |
Correction on DRX for SPS in eMTC |
14.1.0 |
||
|
RP-74 |
RP-162314 |
0959 |
1 |
Correction to TS36.321 |
14.1.0 |
||
|
RP-74 |
RP-162324 |
0960 |
2 |
Introduction of SRS switching for LTE |
14.1.0 |
||
|
RP-74 |
RP-162321 |
0962 |
1 |
PDCCH-subframe definition for LAA |
14.1.0 |
||
|
RP-74 |
RP-162321 |
0963 |
1 |
Monitoring of PUSCH trigger B while not in Active Time |
14.1.0 |
||
|
RP-74 |
RP-162321 |
0964 |
– |
Clarification of PUSCH trigger B reception and inactivity timer starting |
14.1.0 |
||
|
RP-74 |
RP-162314 |
0968 |
– |
Correction to translation of timers specified in PDCCH periods |
14.1.0 |
||
|
RP-74 |
RP-162313 |
0969 |
1 |
Correction to when follow-on DRX actions are initiated in coverage enhanced mode |
14.1.0 |
||
|
RP-74 |
RP-162321 |
0970 |
– |
Type2 PHR for eLAA |
14.1.0 |
||
|
RP-74 |
RP-162328 |
0975 |
1 |
Introducing Shorter Resource Reservation Periodicities for V2X |
14.1.0 |
||
|
RP-74 |
RP-162328 |
0976 |
2 |
Miscellaneous V2V corrections |
14.1.0 |
||
|
RP-74 |
RP-162329 |
0977 |
1 |
SkipUplinkTxSPS correction to enable adaptive retransmissions |
14.1.0 |
||
|
RP-74 |
RP-162314 |
0985 |
|
Further clarification for PDCCH order in NB-IoT |
14.1.0 |
||
|
RP-74 |
RP-162314 |
0987 |
1 |
Clarification of NPRACH resources for UE supporting multi-tone MSG3 |
14.1.0 |
||
|
RP-74 |
RP-162313 |
0989 |
– |
Correction on definition of HARQ RTT Timer |
14.1.0 |
||
|
RP-74 |
RP-162329 |
0990 |
|
CR on RV setting with UL skipping |
14.1.0 |
||
|
2017-03 |
RP-75 |
RP-170636 |
0991 |
3 |
B |
Introducing Rel-14 NB-IoT enhancements and SC-PTM for NB-IoT and eMTC |
14.2.0 |
|
RP-75 |
RP-170655 |
0994 |
– |
A |
Correction on channel bandwidth definition for NB-IoT |
14.2.0 |
|
|
RP-75 |
RP-170626 |
0995 |
– |
F |
Correction on HARQ operations for eLAA |
14.2.0 |
|
|
RP-75 |
RP-170643 |
0996 |
2 |
F |
Correction for V2V resource selection procedure in TS 36.321 |
14.2.0 |
|
|
RP-75 |
RP-170643 |
0999 |
2 |
F |
Corrections to Resource Reselection Procedure in MAC |
14.2.0 |
|
|
RP-75 |
RP-170653 |
1002 |
1 |
A |
Clarification on DRX handling for eMTC and NB-IoT |
14.2.0 |
|
|
RP-75 |
RP-170643 |
1003 |
1 |
F |
Definition of destination index for V2X slidelink communication |
14.2.0 |
|
|
RP-75 |
RP-170655 |
1006 |
– |
A |
Clarification on Logical Channel Group Id for NB-IoT |
14.2.0 |
|
|
RP-75 |
RP-170656 |
1009 |
1 |
A |
Clarification on DPR MAC CE |
14.2.0 |
|
|
RP-75 |
RP-170642 |
1012 |
1 |
B |
Introduction of data inactivity timer |
14.2.0 |
|
|
RP-75 |
RP-170653 |
1014 |
1 |
A |
IOT indication for unicast MPDCCH/PDSCH/PUSCH frequency hopping |
14.2.0 |
|
|
RP-75 |
RP-170635 |
1017 |
1 |
B |
Introduction of LTE-based V2X services |
14.2.0 |
|
|
RP-75 |
RP-170638 |
1018 |
3 |
B |
Introduction of Voice and Video Coverage Enhancements |
14.2.0 |
|
|
RP-75 |
RP-170629 |
1021 |
1 |
B |
Introducing Activation/Deactivation CSI-RS MAC CE for eFD-MIMO |
14.2.0 |
|
|
RP-75 |
RP-170633 |
1024 |
– |
B |
Additional SI-RNTI to support dedicated FeMBMS system broadcasting |
14.2.0 |
|
|
RP-75 |
RP-170653 |
1030 |
1 |
F |
Correction on RV setting for eMTC |
14.2.0 |
|
|
RP-75 |
RP-170630 |
1035 |
4 |
B |
Introduction of preallocated uplink grant in MAC |
14.2.0 |
|
|
RP-75 |
RP-170656 |
1037 |
– |
A |
Preamble group selection after contention resolution failure |
14.2.0 |
|
|
RP-75 |
RP-170653 |
1014 |
1 |
A |
Corrected an implementation error in CR1014r1 |
14.2.1 |
|
|
2017-06 |
RP-76 |
RP-171226 |
1038 |
3 |
F |
Introducing a new resource reselection trigger for V2X sidelink communication |
14.3.0 |
|
RP-76 |
RP-171233 |
1053 |
2 |
F |
Clarification for the UE Contention Resolution Identity MAC Control Element |
14.3.0 |
|
|
RP-76 |
RP-171224 |
1062 |
3 |
F |
Small corrections to random access procedure and DRX for REL-14 NB-IoT Enhancements |
14.3.0 |
|
|
RP-76 |
RP-171223 |
1063 |
1 |
F |
Alignment of the parameter names for SC-PTM DRX for SC-MCCH and SC-MTCH |
14.3.0 |
|
|
RP-76 |
RP-171224 |
1068 |
2 |
D |
Editorial corrections for MAC |
14.3.0 |
|
|
RP-76 |
RP-171244 |
1072 |
3 |
A |
Configuration of preamble groups for CE levels and preamble groups A/B – Alt2 |
14.3.0 |
|
|
RP-76 |
RP-171231 |
1076 |
2 |
F |
Clarification on the UE behaviour when the validity of PUSCH trigger A expires |
14.3.0 |
|
|
RP-76 |
RP-171227 |
1088 |
1 |
F |
Miscellaneous corrections to V2X in TS 36.321 |
14.3.0 |
|
|
RP-76 |
RP-171232 |
1094 |
1 |
F |
Remaining issues in Activation/Deactivation of CSI-RS resources MAC CE for eFD-MIMO |
14.3.0 |
|
|
RP-76 |
RP-171224 |
1096 |
– |
F |
Stop condition for the drx-retransmissionTimer for NB-IoT |
14.3.0 |
|
|
RP-76 |
RP-171224 |
1097 |
– |
F |
Correction to maximum number of HARQ processes for NB-IoT |
14.3.0 |
|
|
RP-76 |
RP-171223 |
1105 |
1 |
F |
Action upon reception of SC-PTM stop indication |
14.3.0 |
|
|
RP-76 |
RP-171228 |
1108 |
– |
F |
Correction of L2 latency reduction |
14.3.0 |
|
|
RP-76 |
RP-171221 |
1109 |
– |
F |
SI-RNTI number correction for feMBMS |
14.3.0 |
|
|
RP-76 |
RP-171224 |
1113 |
2 |
F |
Resources selection for PRACH triggered by a PDCCH order in eNB-IoT(Option2) |
14.3.0 |
|
|
RP-76 |
RP-171244 |
1114 |
– |
A |
Correction on terminology of SI for eMTC |
14.3.0 |
|
|
RP-76 |
RP-171244 |
1116 |
1 |
A |
RAR reception for eMTC |
14.3.0 |
|
|
RP-76 |
RP-171243 |
1123 |
– |
A |
Corrections to Sidelink Discovery Gap for Transmission |
14.3.0 |
|
|
2017-09 |
RP-77 |
RP-171913 |
1143 |
– |
F |
Miscellaneous corrections for NB-IoTenh and feMTC |
14.4.0 |
|
RP-77 |
RP-171913 |
1144 |
2 |
F |
Correction on TAT in RACH-less handover |
14.4.0 |
|
|
RP-77 |
RP-171914 |
1147 |
2 |
F |
Corrections to random selection for P2X related V2X sidelink communication |
14.4.0 |
|
|
RP-77 |
RP-171918 |
1155 |
– |
A |
Correction on SR prohibit |
14.4.0 |
|
|
RP-77 |
RP-171913 |
1156 |
– |
F |
Correction on eLAA |
14.4.0 |
|
|
RP-77 |
RP-171919 |
1160 |
1 |
F |
RAR reception for NB-IoT |
14.4.0 |
|
|
RP-77 |
RP-171913 |
1164 |
1 |
F |
Clarification on UE behaviour for Contention Resolution with Padding |
14.4.0 |
|
|
RP-77 |
RP-171920 |
1176 |
1 |
A |
Corrections on TS 36.321 for Rel-13 MTC |
14.4.0 |
|
|
RP-77 |
RP-171911 |
1178 |
– |
F |
Corrections to references |
14.4.0 |
|
|
RP-77 |
RP-171915 |
1181 |
1 |
F |
Correction to contention free random access |
14.4.0 |
|
|
RP-77 |
RP-171913 |
1182 |
2 |
C |
Introduction of Release Assistance Indication |
14.4.0 |
|
|
RP-77 |
RP-171917 |
1184 |
1 |
A |
Clarification on TAT restart without valid TA value |
14.4.0 |
|
|
2017-12 |
RP-78 |
RP-172617 |
1186 |
1 |
F |
Removal of FFS for RAI in 36.321 |
14.5.0 |
|
RP-78 |
RP-172616 |
1187 |
1 |
F |
Minor correction on the IE of pusch-EnhancementsConfig in feMTC |
14.5.0 |
|
|
RP-78 |
RP-172617 |
1188 |
4 |
F |
Clarification on carrier index in PDCCH order |
14.5.0 |
|
|
RP-78 |
RP-172722 |
1189 |
2 |
F |
Correction of reference for kPHICH value |
14.5.0 |
|
|
RP-78 |
RP-172617 |
1190 |
2 |
F |
Corrections to V2X functionality |
14.5.0 |
|
|
RP-78 |
RP-172616 |
1194 |
2 |
F |
Change to actions upon mac-ContentionResolutionTimer expiry for FeMTC and eNB-IoT |
14.5.0 |
|
|
RP-78 |
RP-172617 |
1199 |
1 |
F |
Correction to random access power control in 36.321 |
14.5.0 |
|
|
RP-78 |
RP-172616 |
1202 |
1 |
F |
Clarification on averaging window for RAN assisted codec rate adaptation |
14.5.0 |
|
|
2017-12 |
RP-78 |
RP-172614 |
1196 |
2 |
B |
EN-DC impacts to LTE MAC |
15.0.0 |
|
2018-03 |
RP-79 |
RP-180443 |
1213 |
1 |
A |
Correction on SI-RNTI value for FeMBMS |
15.1.0 |
|
RP-79 |
RP-180445 |
1218 |
1 |
A |
Correct introduction of multiple HARQ processes for NB-IoT |
15.1.0 |
|
|
RP-79 |
RP-180444 |
1230 |
1 |
A |
Clarification to Sidelink Booking Processes |
15.1.0 |
|
|
RP-79 |
RP-180443 |
1239 |
1 |
A |
Removal of Type3 PH for single serving cell case |
15.1.0 |
|
|
RP-79 |
RP-180441 |
1242 |
– |
A |
MAC Corrections for RRC Resume |
15.1.0 |
|
|
2018-07 |
RP-80 |
RP-181218 |
1203 |
3 |
B |
Introduction of shortened TTI and processing time for LTE |
15.2.0 |
|
RP-80 |
RP-181230 |
1228 |
2 |
A |
Correction to MAC Entity modelling |
15.2.0 |
|
|
RP-80 |
RP-181232 |
1243 |
5 |
A |
Clarification for DPR Update |
15.2.0 |
|
|
RP-80 |
RP-181215 |
1247 |
2 |
F |
Clarification on PHR in EN-DC |
15.2.0 |
|
|
RP-80 |
RP-181252 |
1249 |
4 |
B |
Introduction of EDT for eMTC and NB-IoT in Rel-15 TS 36.321 |
15.2.0 |
|
|
RP-80 |
RP-181214 |
1262 |
2 |
F |
Clarification of introducing SUO case1 |
15.2.0 |
|
|
RP-80 |
RP-181248 |
1267 |
3 |
B |
Introduction of eV2X in 36.321 |
15.2.0 |
|
|
RP-80 |
RP-181252 |
1272 |
2 |
B |
Introduction of further NB-IoT enhancements in TS 36.321 |
15.2.0 |
|
|
RP-80 |
RP-181224 |
1273 |
3 |
B |
Running Rel-15 36.321 CR for eMTC (excluding EDT) |
15.2.0 |
|
|
RP-80 |
RP-181250 |
1274 |
3 |
B |
MAC functionality for euCA |
15.2.0 |
|
|
RP-80 |
RP-181233 |
1279 |
1 |
A |
Clarification on Random Access Procedure initiation with RACH-less configurations |
15.2.0 |
|
|
RP-80 |
RP-181216 |
1281 |
1 |
F |
Correction on PHR trigger for EN-DC |
15.2.0 |
|
|
RP-80 |
RP-181235 |
1283 |
– |
A |
Correction to enhanced random access power control |
15.2.0 |
|
|
RP-80 |
RP-181236 |
1285 |
1 |
A |
Flush HARQ buffer upon skipping a UL transmission |
15.2.0 |
|
|
RP-80 |
RP-181254 |
1286 |
1 |
B |
Introduction of increased number of E-UTRAN data bearers |
15.2.0 |
|
|
RP-80 |
RP-181214 |
1287 |
– |
F |
PHR format with EN-DC |
15.2.0 |
|
|
RP-80 |
RP-181234 |
1289 |
1 |
A |
Corrections to UL and SL SPS V-RNTI |
15.2.0 |
|
|
RP-80 |
RP-181249 |
1290 |
1 |
B |
Introduce feLAA in TS 36.321 |
15.2.0 |
|
|
RP-80 |
RP-181234 |
1293 |
1 |
A |
Correction to MAC PDU reception in sidelink |
15.2.0 |
|
|
RP-80 |
RP-181232 |
1297 |
2 |
A |
Clarification on DRX timer counting |
15.2.0 |
|
|
RP-80 |
RP-181232 |
1300 |
2 |
F |
Clarifying PDCCH Period Definition |
15.2.0 |
|
|
RP-80 |
RP-181235 |
1302 |
2 |
A |
Correction on RA-RNTI Range for Non Anchor Carrier |
15.2.0 |
|
|
RP-80 |
RP-181247 |
1305 |
1 |
B |
Introduction of Ultra Reliable Low Latency Communication for LTE |
15.2.0 |
|
|
2018-09 |
RP-81 |
RP-181962 |
1309 |
1 |
A |
Correction on MCS selection |
15.3.0 |
|
RP-81 |
RP-181948 |
1311 |
1 |
F |
CR to clarify the aggregating carriers for PC5 CA synchronization in Mode 3 (Opt1) |
15.3.0 |
|
|
RP-81 |
RP-181948 |
1312 |
1 |
F |
Correction on transmission format selection in TS 36.321 (Opt1) |
15.3.0 |
|
|
RP-81 |
RP-181963 |
1321 |
– |
A |
Correction to enhanced random access power control |
15.3.0 |
|
|
RP-81 |
RP-181940 |
1322 |
1 |
F |
Clarification on Dual Connectivity PHR MAC CE for EN-DC |
15.3.0 |
|
|
RP-81 |
RP-181945 |
1323 |
1 |
F |
Corrections to TDD in 36.321 |
15.3.0 |
|
|
RP-81 |
RP-181945 |
1324 |
2 |
F |
Correction to SR with SPS BSR in 36.321 |
15.3.0 |
|
|
RP-81 |
RP-181945 |
1325 |
1 |
F |
Correction to NPRACH range enhancements in 36.321 |
15.3.0 |
|
|
RP-81 |
RP-181961 |
1327 |
1 |
F |
Defining PDCCH-Subframes for NB-IoT UE |
15.3.0 |
|
|
RP-81 |
RP-181943 |
1328 |
1 |
F |
Correction on HARQ RTT Timers |
15.3.0 |
|
|
RP-81 |
RP-181948 |
1330 |
– |
F |
Correction on the logical channel selection in sidelink LCP |
15.3.0 |
|
|
RP-81 |
RP-181945 |
1336 |
1 |
F |
Clarification to trigger for SR |
15.3.0 |
|
|
RP-81 |
RP-181949 |
1337 |
– |
F |
Miscellaneous editorial corrections to Ultra Reliable Low Latency Communication |
15.3.0 |
|
|
RP-81 |
RP-181949 |
1338 |
1 |
F |
Conflict handling for multiple UL SPS configurations |
15.3.0 |
|
|
RP-81 |
RP-181949 |
1340 |
1 |
C |
Alignment of MAC CEs between LTE and NR |
15.3.0 |
|
|
RP-81 |
RP-181962 |
1343 |
– |
A |
Corrections to handling of SL unknown protocol data |
15.3.0 |
|
|
RP-81 |
RP-181946 |
1351 |
1 |
F |
Miscellaneous correction to FeLAA in TS 36.321 |
15.3.0 |
|
|
2018-12 |
RP-82 |
RP-182678 |
1355 |
3 |
F |
Flushing HARQ buffer for carrier reselection |
15.4.0 |
|
RP-82 |
RP-182678 |
1357 |
5 |
F |
eV2X clean-up except for UL and SL priotirization in TS 36.321 |
15.4.0 |
|
|
RP-82 |
RP-182671 |
1359 |
4 |
F |
MPDCCH monitoring for receiving HARQ ACK feedback |
15.4.0 |
|
|
RP-82 |
RP-182674 |
1361 |
2 |
F |
Corrections to euCA |
15.4.0 |
|
|
RP-82 |
RP-182681 |
1362 |
2 |
F |
Corrections to random access power control for TDD in 36.321 |
15.4.0 |
|
|
RP-82 |
RP-182681 |
1363 |
4 |
F |
Corrections to EDT for definition, Msg3, preambles, and MAC header structure |
15.4.0 |
|
|
RP-82 |
RP-182678 |
1365 |
3 |
F |
Correction on V2X sidelink communication in TS 36.321 |
15.4.0 |
|
|
RP-82 |
RP-182674 |
1366 |
2 |
F |
Correction to MAC PDU subheaders including eLCID |
15.4.0 |
|
|
RP-82 |
RP-182681 |
1370 |
4 |
F |
Correction of fallback cases in UP-EDT |
15.4.0 |
|
|
RP-82 |
RP-182678 |
1383 |
4 |
F |
UL and SL prioritization in TS 36.321- alt2 |
15.4.0 |
|
|
RP-82 |
RP-182681 |
1384 |
2 |
F |
Msg3 buffer handling for EDT in 36.321 |
15.4.0 |
|
|
RP-82 |
RP-182680 |
1386 |
1 |
A |
Correction on HARQ re-transmission resource selection |
15.4.0 |
|
|
RP-82 |
RP-182681 |
1387 |
2 |
F |
Correction to start of RAR window for NPRACH fmt2 in 36.321 |
15.4.0 |
|
|
RP-82 |
RP-182679 |
1389 |
– |
F |
Correction on FeLAA in TS 36.321 |
15.4.0 |
|
|
RP-82 |
RP-182680 |
1392 |
1 |
F |
HARQ process ID for synchronous HARQ operation |
15.4.0 |
|
|
RP-82 |
RP-182653 |
1393 |
– |
F |
Correction on Dual Connectivity MAC CE |
15.4.0 |
|
|
RP-82 |
RP-182653 |
1394 |
– |
F |
Clarification on HARQ RTT for SUO case 1 |
15.4.0 |
|
|
RP-82 |
RP-182678 |
1395 |
1 |
F |
Clarification to Mode-3 Procedures |
15.4.0 |
|
|
RP-82 |
RP-182678 |
1396 |
2 |
F |
Clarification to Sidelink PDCP Duplication |
15.4.0 |
|
|
RP-82 |
RP-182678 |
1397 |
2 |
F |
Clarification to TX Carrier (re)-Selection for V2X Sidelink Communication |
15.4.0 |
|
|
RP-82 |
RP-182680 |
1400 |
1 |
A |
CR to TS 36.321 to correct the ambiguity on bit rate recommendation for index 0 |
15.4.0 |
|
|
RP-82 |
RP-182667 |
1404 |
4 |
F |
Correction to PHR procedures in EN-DC |
15.4.0 |
|
|
2019-03 |
RP-83 |
RP-190551 |
1407 |
3 |
F |
Correction on TX capability limitation and other miscellaneous issues |
15.5.0 |
|
RP-83 |
RP-190551 |
1408 |
– |
F |
Corrections to UL HARQ ACK Feedback |
15.5.0 |
|
|
RP-83 |
RP-190551 |
1412 |
3 |
F |
Clarification on EDT preambles |
15.5.0 |
|
|
RP-83 |
RP-190551 |
1415 |
1 |
F |
Correction on the dormantSCellDeactivationTimer |
15.5.0 |
|
|
RP-83 |
RP-190551 |
1420 |
1 |
F |
Correction to ContentionResolutionTimer in EDT |
15.5.0 |
|
|
RP-83 |
RP-190549 |
1423 |
2 |
F |
Correction on Recommended bit rate MAC Control Element |
15.5.0 |
|
|
RP-83 |
RP-190552 |
1424 |
– |
F |
Correction on NDI toggling in FeLAA |
15.5.0 |
|
|
RP-83 |
RP-190549 |
1427 |
1 |
A |
Correction of DRX for SC-PTM |
15.5.0 |
|
|
RP-83 |
RP-190552 |
1428 |
1 |
F |
Clear SPS resources for Scell |
15.5.0 |
|
|
RP-83 |
RP-190551 |
1429 |
– |
F |
Correction to Activation/Deactivation of SCells |
15.5.0 |
|
|
RP-83 |
RP-190551 |
1432 |
1 |
F |
CR on PDCP duplication related operations in sidelink LCP procedure and resource reselection procedure |
15.5.0 |
|
|
RP-83 |
RP-190540 |
1433 |
1 |
F |
Clarification on PH omitting of dynamic power sharing incapable UE |
15.5.0 |
|
|
2019-06 |
RP-84 |
RP-191383 |
1411 |
2 |
A |
Correction to handling of preallocated UL grants during RACH-less HO |
15.6.0 |
|
RP-84 |
RP-191385 |
1440 |
1 |
F |
Correction on TX carrier selection |
15.6.0 |
|
|
RP-84 |
RP-191385 |
1441 |
1 |
F |
Correction to DELTA_PREAMBLE for NPRACH resource format 2 |
15.6.0 |
|
|
RP-84 |
RP-191385 |
1442 |
– |
F |
Correction on resource selection |
15.6.0 |
|
|
RP-84 |
RP-191382 |
1443 |
5 |
F |
Correction to Minimum Length of DL and UL HARQ RTT Timer |
15.6.0 |
|
|
RP-84 |
RP-191384 |
1446 |
– |
F |
Correction on Random Access Preamble groups for EDT |
15.6.0 |
|
|
RP-84 |
RP-191375 |
1447 |
1 |
F |
Correction on PHR for late drop |
15.6.0 |
|
|
RP-84 |
RP-191385 |
1450 |
1 |
F |
Clarification of Length field for DPR |
15.6.0 |
|
|
RP-84 |
RP-191383 |
1452 |
1 |
A |
Clarification of configured carrier |
15.6.0 |
|
|
2019-09 |
RP-85 |
RP-192198 |
1453 |
1 |
F |
Normative Annex of CRs Containing Early Implementable Features and Corrections |
15.7.0 |
|
2019-12 |
RP-86 |
RP-192940 |
1457 |
4 |
A |
Clarification on RA and Msg3 with PUSCH Enhancements |
15.8.0 |
|
RP-86 |
RP-192941 |
1459 |
2 |
F |
Clarification of PDCCH monitoring when not fully aligned with PDCCH periods |
15.8.0 |
|
|
RP-86 |
RP-192935 |
1462 |
– |
F |
Correction to PHR procedures in DC configuration |
15.8.0 |
|
|
2020-03 |
RP-87 |
RP-200362 |
1461 |
3 |
B |
Introduction of Power headroom reporting for Additional SRS |
16.0.0 |
|
RP-87 |
R2-200364 |
1463 |
2 |
B |
Introducation of even further mobility enhancement in E-UTRAN |
16.0.0 |
|
|
RP-87 |
RP-200359 |
1464 |
1 |
B |
Recommended Bit Rate/Query for FLUS and MTSI |
16.0.0 |
|
|
RP-87 |
RP-200360 |
1465 |
1 |
B |
Introduction of further enhancements for eMTC |
16.0.0 |
|
|
RP-87 |
RP-200361 |
1466 |
1 |
B |
Introduction of additional enhancements for NB-IoT |
16.0.0 |
|
|
RP-87 |
RP-200346 |
1467 |
1 |
B |
Introduction of 5G V2X with NR Sidelink |
16.0.0 |
|
|
2020-07 |
RP-88 |
RP-201193 |
1472 |
2 |
F |
Corrections to MAC for Rel-16 NB-IoT |
16.1.0 |
|
RP-88 |
RP-201193 |
1473 |
2 |
F |
Corrections to MAC for Rel-16 eMTC |
16.1.0 |
|
|
RP-88 |
RP-201195 |
1474 |
1 |
B |
CR on 36.321 for even further mobility enhancement in E-UTRAN |
16.1.0 |
|
|
RP-88 |
RP-201168 |
1479 |
1 |
A |
Clarification on PHR report for power class 14dBm UE |
16.1.0 |
|
|
RP-88 |
RP-201168 |
1483 |
1 |
A |
Clarification for dedicated SR with HARQ-ACK |
16.1.0 |
|
|
RP-88 |
RP-201176 |
1484 |
– |
F |
Corrections to 5G V2X with NR Sidelink |
16.1.0 |
|
|
2020-09 |
RP-89 |
RP-201927 |
1485 |
3 |
F |
Corrections to 5G V2X with NR Sidelink |
16.2.0 |
|
RP-89 |
RP-201928 |
1495 |
1 |
F |
Editorial changes |
16.2.0 |
|
|
RP-89 |
RP-201935 |
1501 |
– |
A |
Correction on PDU generation for UL spatial multiplexing – Option 1 |
16.2.0 |
|
|
RP-89 |
RP-201928 |
1503 |
2 |
F |
MAC corrections for PUR |
16.2.0 |
|
|
2020-12 |
RP-90 |
RP-202780 |
1512 |
2 |
A |
Correction on lch-CellRestriction |
16.3.0 |
|
RP-90 |
RP-202769 |
1516 |
1 |
F |
Corrections to UL/SL Prioritization for 5G V2X with NR Sidelink |
16.3.0 |
|
|
2021-03 |
RP-91 |
RP-210698 |
1517 |
1 |
F |
PDCCH-based HARQ-ACK for a specific HARQ process with multi-TB scheduling |
16.4.0 |
|
RP-91 |
RP-210698 |
1518 |
1 |
F |
Clarification on TA validation for PUR |
16.4.0 |
|
|
RP-91 |
RP-210700 |
1521 |
1 |
F |
Recommended bit rate query handling at MAC Reset |
16.4.0 |
|
|
2021-06 |
RP-92 |
RP-211479 |
1524 |
1 |
F |
MAC clarifications for PUR |
16.5.0 |
|
RP-92 |
RP-211473 |
1525 |
– |
F |
CR on LCP of the source MAC entity |
16.5.0 |
|
|
2021-09 |
RP-93 |
RP-212441 |
1526 |
– |
F |
Correction on UL/SL prioritization |
16.6.0 |
|
2022-03 |
RP-95 |
RP-220473 |
1534 |
– |
F |
Correction to pur-ResponseWindowTimer and removal of pur-ResponseWindowSize |
16.7.0 |
|
RP-95 |
RP-220472 |
1535 |
1 |
F |
Introduction of carrier specific NRSRP thresholds for NPRACH resource selection |
16.7.0 |
|
|
2022-03 |
RP-95 |
RP-220507 |
1536 |
– |
B |
Introduction of Rel-17 enhancements for NB-IoT and eMTC |
17.0.0 |
|
RP-95 |
RP-220983 |
1537 |
3 |
B |
Introducing Non-Terrestrial Network in NB-IoT and eMTC |
17.0.0 |
|
|
2022-06 |
RP-96 |
RP-221712 |
1540 |
1 |
A |
Correction on calculating number of TBs for multi-TB scheduling |
17.1.0 |
|
RP-96 |
RP-221737 |
1541 |
– |
F |
Corrections for Supporting Non-Terrestrial Network in NB-IoT and eMTC |
17.1.0 |
|
|
2022-09 |
RP-97 |
RP-222522 |
1547 |
– |
F |
Corrections for Supporting Non-Terrestrial Network in NB-IoT and eMTC |
17.2.0 |
Note: WORD version for TS 36.321 v12.4.0 was changed over from WORD 2003 to WORD 2007. Accordingly, some table formats may be converted due to the impact of comparability mode but contents in the tables were confirmed to be consistent.