A.8 Default messages for CS to PS SRVCC

34.229-13GPPInternet Protocol (IP) multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP)Part 1: Protocol conformance specificationRelease 16TSUser Equipment (UE) conformance specification

A.8.1 MESSAGE UE receiving the ATGW information for CS to PS SRVCC

Header/param

Cond

Value/remark

Rel

Reference

Request-Line

RFC 3261 [15]

Method

MESSAGE

RFC 3428 [91]

Request-URI

UE’s registered contact address in SIP URI form, as provided in the Contact header of the REGISTER message

SIP-Version

SIP/2.0

Via

RFC 3261 [15]

sent-protocol

SIP/2.0/UDP

sent-by

SS P-CSCF address: protected server port of SS

via-branch

value starting with ‘z9hG4bK’ (NOTE 1)

From

RFC 3261 [15]

addr-spec

<sip:sti-sr@atcf.visited2.net> (SIP URI of the STI-SR)

tag

any value

To

RFC 3261 [15]

addr-spec

default public user identity of the UE

tag

not present

Call-ID

RFC 3261 [15]

callid

a random text string generated by the SS

CSeq

RFC 3261 [15]

value

any value

method

MESSAGE

Max-Forwards

RFC 3261 [15]

value

non-zero value

Accept-Contact

RFC 3841 [64]

ac-value

+g.3gpp.smsip;require;explicit

Content-Disposition

RFC 3261 [15]

disp-type

render

P-Asserted-Identity

RFC 3325 [89]

addr-spec

<sip:sti-sr@atcf.visited2.net> (SIP URI of the STI-SR)

Content-Type

RFC 3261 [15]

media-type

application/sdp

Content-Length

RFC 3261 [15]

value

length of message-body

NOTE 1: Branch parameter values sent by SS are different within a test case execution.

A.8.2 MESSAGE UE providing information for CS to PS SRVCC

Header/param

Cond

Value/remark

Rel

Reference

Request-Line

RFC 3261 [15]

Method

MESSAGE

RFC 3428 [91]

Request-URI

<sip:sti-sr@atcf.visited2.net> (same value as received in A.8.1)

SIP-Version

SIP/2.0

Via

RFC 3261 [15]

sent-protocol

SIP/2.0/UDP (when using UDP) or
SIP/2.0/TCP (when using TCP)

sent-by

IP address or FQDN and protected server port of the UE

via-branch

value starting with ‘z9hG4bK’

From

RFC 3261 [15]

addr-spec

SIP URI of the UE

tag

any value

To

RFC 3261 [15]

addr-spec

<sip:sti-sr@atcf.visited2.net> (SIP URI of the STI-SR) (same value as received in A.8.1)

tag

not present

Call-ID

RFC 3261 [15]

callid

must be present, value not checked

CSeq

RFC 3261 [15]

value

any value

method

MESSAGE

Max-Forwards

RFC 3261 [15]

value

non-zero value

P-Access-Network-Info

A1

RFC 7315 [132]
RFC 7913 [154]

access-net-spec

A3

access network information and, if applicable, the cell ID

A4

access network information for NR, containing access-class parameter with value "3GPP-NR" or access-type parameter with value "3GPP-NR-FDD" or "3GPP-NR-TDD", and also containing the cell ID

Rel-15

Route

RFC 3261 [15]

route-param

<sip: SS P-CSCF address: protected server port of SS;lr>, <sip: scscf.3gpp.org;lr>

Content-Type

RFC 3261 [15]

media-type

application/sdp

Content-Length

header shall be present if UE uses TCP to send this request and if there is a message-body

RFC 3261 [15]

value

length of message-body

Condition

Explanation

A1

IMS security (A.6a/2 3GPP TS 34.229-2 [5])

A2

GIBA (A.6a/1 3GPP TS 34.229-2 [5])

A3

UE uses E-UTRAN access (A.18/1 3GPP TS 34.229-2 [5])

A4

UE uses NR access (A.18/5 3GPP TS 34.229-2 [5])

Annex B (normative):
Default DHCP messages

For all the message definitions below, the acceptable order and syntax of headers and fields within these headers must be according to IETF RFCs where those headers have been defined. Typically the order of headers is not significant, but there are well defined exceptions where the order is important.

For IPv6 DHCP messages refer to RFC 3315[23].

For IPv4 DHCP messages refer to RFC 2131[55].

The contents of the messages described in the present Annex is not complete – only the fields and headers required to be checked or generated by SS are listed here. The messages sent by the UE may contain additional parameters, fields and headers which are not checked and must thus be ignored by SS.