Single Cell

6.1.1.4

PLMN selection of RPLMN, HPLMN, UPLMN and OPLMN; Automatic mode

X

6.1.1.5

PLMN selection of "Other PLMN / access technology combinations"; Automatic mode

X

6.1.1.7

Cell reselection of ePLMN in manual mode

X

6.1.2.1

Cell reselection

X

6.1.2.1a

Cell reselection for inter-band operation

X

6.1.2.2

Cell reselection using Qhyst, Qoffset and Treselection

X

6.1.2.3

HCS Cell reselection

X

6.1.2.4

HCS Cell reselection using reselection timing parameters for the H criterion

X

6.1.2.5

HCS Cell reselection using reselection timing parameters for the R criterion

X

6.1.2.6

Emergency calls

X

6.1.2.8

Cell reselection: Equivalent PLMN

X

6.1.2.9a

Cell reselection using cell status and cell reservations – Type "A" USIM

X

6.1.2.9b

Cell reselection using cell status and cell reservations – Type "B" USIM

X

8.1.1.1

RRC / Paging for Connection in idle mode

X

X

8.1.1.2

RRC / Paging for Connection in connected mode (CELL_PCH)

X

X

8.1.1.3

R RRC / Paging for Connection in connected mode (URA_PCH)

X

X

8.1.1.4

RRC / Paging for notification of BCCH modification in idle mode

X

X

8.1.1.5

RRC / Paging for notification of BCCH modification in connected mode (CELL_PCH)

X

X

8.1.1.6

RRC / Paging for notification of BCCH modification in connected mode (URA_PCH)

X

8.1.1.7

RRC / Paging for connection in connected mode (CELL_DCH)

X

X

8.1.1.8

RRC / Paging for Connection in connected mode (CELL_FACH)

X

X

8.1.1.9

RRC / Paging for Connection in idle mode (multiple paging records)

X

8.1.1.10

RRC / Paging for Connection in connected mode (URA_PCH, multiple paging records)

X

8.1.2.1

RRC / RRC Connection Establishment in CELL_DCH state: Success

X

X

8.1.2.2

RRC / RRC Connection Establishment: Success after T300 timeout

X

8.1.2.3

RRC / RRC Connection Establishment: Failure (V300 is greater than N300)

X

8.1.2.4

RRC / RRC Connection Establishment: Reject ("wait time" is not equal to 0)

X

X

8.1.2.7

RRC Connection Establishment in CELL_FACH state: Success

X

X

8.1.2.9

RRC / RRC Connection Establishment: Success after Physical channel failure and Invalid configuration

X

X

8.1.2.10

RRC / Radio Bearer Establishment for transition from CELL_DCH to CELL_FACH (Frequency band modification): Success

X

X

8.1.2.10a

RRC connection establishment in CELL_DCH on another frequency in a different frequency band

X

8.1.2.11

RRC Connection Establishment in FACH state (Frequency band modification): Success

X

8.1.2.21

RRC Connection Establishment: Reject with Frequency Info set to the same frequency band – Successful case

X

8.1.2.21a

RRC Connection Establishment: Reject with Frequency Info set to a different frequency band – Successful case

X

8.1.2.22

RRC Connection Establishment: Reject with Frequency Info set to the same frequency band – Unsuccessful case

X

8.1.2.22a

RRC Connection Establishment: Reject with Frequency Info set to a different frequency band – Unsuccessful case

X

8.1.3.1

RRC / RRC Connection Release in CELL_DCH state: Successful

X

X

8.1.3.3

RRC / RRC Connection Release using on CCCH in CELL_FACH state: Failure

X

X

8.1.3.4

RRC / RRC Connection Release in CELL_FACH state: Failure

X

8.1.3.5

RRC / RRC Connection Release in CELL_FACH state: Invalid message

X

8.1.3.9

RRC Connection Release in CELL_DCH state (Network Authentication Failure): Success

X

8.1.5.1

RRC / UE Capability in CELL_DCH state: Success

X

X

8.1.5.4

RRC / UE Capability in CELL_FACH state: Success

X

X

8.1.6.1

Direct Transfer in CELL_DCH state (invalid message reception and no signalling connection exists)

X

X

8.1.6.3

Measurement Report on INITIAL DIRECT TRANSFER message and UPLINK DIRECT TRANSFER message

X

8.1.7.1

Security mode command in CELL_DCH state (CS Domain)

X

8.1.7.1b

Security mode command in CELL_DCH state (PS Domain)

X

8.1.7.1c

Security mode control in CELL_DCH state (CN Domain switch and new keys at RRC message sequence number wrap around)

X

8.1.7.1d

Security mode control in CELL_DCH state interrupted by a cell update

X

8.1.7.2

RRC / Security mode control in CELL_FACH state

X

8.1.9

RRC / Signalling Connection Release Indication

X

X

8.1.10.1

Dynamic change of segmentation, concatenation & scheduling and handling of unsupported information blocks

X

8.1.12

RRC / Radio Bearer Establishment for transition from CELL_FACH to CELL_DCH: Failure (Physical channel Failure and successful reversion to old configuration)

X

X

8.2.1.1

Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success

X

X

8.2.1.4

RRC / Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Failure (Physical channel Failure and successful reversion to old configuration)

X

X

8.2.1.7

RRC / Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Failure (Invalid message reception and invalid configuration)

X

X

8.2.1.8

RRC / Radio Bearer Establishment for transition from CELL_DCH to CELL_FACH: Success

X

X

8.2.1.9

RRC / Radio Bearer Establishment for transition from CELL_DCH to CELL_FACH: Success (Cell re-selection)

X

X

8.2.1.10

RRC / Radio Bearer Establishment for transition from CELL_DCH to CELL_FACH (Frequency band modification): Success

X

X

8.2.1.24

Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH (Frequency band modification): Success

X

X

8.2.1.24a

Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH (Inter band handover): Success

X

8.2.1.33

Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success (Unsynchronised RL Reconfiguration)

X

8.2.1.34

Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success (Unsynchronised RL Reconfiguration with frequency modification)

X

8.2.1.34a

Radio Bearer Establishment for transition from CELL_DCH to CELL_DCH: Success (Unsynchronised RL Reconfiguration with inter band handover)

X

8.2.2.1

RRC / Radio Bearer Reconfiguration (Hard Handover) from CELL_DCH to CELL_DCH: Success

X

X

8.2.2.4

RRC / Radio Bearer Reconfiguration from CELL_DCH to CELL_DCH: Failure (Physical channel failure and reversion failure)

X

X

8.2.2.7

RRC / Radio Bearer Reconfiguration from CELL_DCH to CELL_DCH: Success (stop and continue)

X

X

8.2.2.8

RRC / Radio Bearer Reconfiguration from CELL_DCH to CELL_FACH: Success

X

X

8.2.2.9

RRC / Radio Bearer Reconfiguration from CELL_DCH to CELL_FACH: Success (Cell re-selection)

X

X

8.2.2.10

RRC / Radio Bearer Reconfiguration from CELL_FACH to CELL_DCH: Success

X

8.2.2.11

Radio Bearer Reconfiguration from CELL_FACH to CELL_DCH: Failure (Unsupported configuration)

X

X

8.2.2.17

RRC / Radio Bearer Reconfiguration from CELL_FACH to CELL_FACH: Success

X

X

8.2.2.18

RRC / Radio Bearer Reconfiguration from CELL_FACH to CELL_FACH: Success (Cell re-selection)

X

8.2.2.19

RRC / Radio Bearer Reconfiguration from CELL_DCH to CELL_DCH: Success (Subsequently received)

X

X

8.2.2.23

RRC / Radio Bearer Reconfiguration from CELL_FACH to CELL_PCH: Success

X

X

8.2.2.31

Radio Bearer Reconfiguration for transition from CELL_FACH to CELL_DCH (Frequency band modification): Success

X

8.2.2.35

Radio Bearer Reconfiguration from CELL_DCH to CELL_FACH: Successful channel switching with multiple PS RABs established

X

8.2.2.43

Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Seamless SRNS relocation, without pending of ciphering, frequency band modification)

X

8.2.3.1

Radio Bearer Release for transition from CELL_DCH to CELL_DCH: Success

X

X

8.2.3.7

RRC / Radio Bearer Release for transition from CELL_DCH to CELL_FACH: Success

X

X

8.2.3.8

RRC / Radio Bearer Release for transition from CELL_DCH to CELL_FACH: Success (Cell re‑selection)

X

8.2.3.9

RRC / Radio Bearer Release for transition from CELL_FACH to CELL_DCH: Success

X

X

8.2.3.11

RRC / Radio Bearer Release for transition from CELL_FACH to CELL_DCH: Failure (Physical channel failure and successful reversion to old configuration)

X

X

8.2.3.15

RRC / Radio Bearer Release for transition from CELL_FACH to CELL_FACH: Success

X

X

8.2.3.18

RRC / Radio Bearer Release from CELL_DCH to CELL_PCH: Success

X

X

8.2.3.19

RRC / Radio Bearer Release from CELL_DCH to URA_PCH: Success

X

X

8.2.3.29

Radio Bearer Release for transition from CELL_DCH to CELL_DCH: Associated with signalling connection release during multi call for PS and CS services

X

X

8.2.4.1

Transport channel reconfiguration (Timing re- initialised hard handover with transmission rate modification) from CELL_DCH to CELL_DCH: Success

X

8.2.4.1a

Transport channel reconfiguration (Transmission Rate Modification) from CELL_DCH to CELL_DCH of the same cell: Success

X

8.2.4.3

RRC / Transport channel reconfiguration from CELL_DCH to CELL_DCH: Failure (Physical channel failure and reversion to old configuration)

X

X

8.2.4.4

Transport channel reconfiguration from CELL_DCH to CELL_DCH: Failure (Physical channel failure and cell reselection)

X

8.2.4.4a

Transport channel reconfiguration from CELL_DCH to CELL_DCH: Failure (Physical channel failure and cell reselection) (1.28 Mcps TDD Only)

X

8.2.4.10

RRC / Transport channel reconfiguration from CELL_FACH to CELL_DCH: Success

X

8.2.4.10a

Transport channel reconfiguration from CELL_FACH to CELL_DCH: Success(1.28 Mcps TDD Only)

X

8.2.6.1

RRC / Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH (Hard handover for code modification): Success

X

X

8.2.6.2

RRC / Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH (Hard handover for code modification): Failure (Unsupported configuration)

X

X

8.2.6.7

RRC / Physical channel reconfiguration for transition from CELL_DCH to CELL_FACH: Success

X

X

8.2.6.8

RRC / Physical channel reconfiguration for transition from CELL_DCH to CELL_FACH: Success (Cell re-selection)

X

X

8.2.6.9

RRC / Physical channel reconfiguration for transition from CELL_FACH to CELL_DCH: Success

X

X

8.2.6.11

RRC / Physical channel reconfiguration for transition from CELL_FACH to CELL_DCH: Failure (Physical channel failure and successful reversion to old configuration)

X

X

8.2.6.12

RRC / Physical channel reconfiguration for transition from CELL_FACH to CELL_DCH: Failure (Physical channel failure and cell re-selection)

X

X

8.2.6.19

RRC / Physical channel reconfiguration from CELL_DCH to CELL_PCH: Success

X

X

8.2.6.20

RRC / Physical channel from CELL_DCH to URA_PCH: Success

X

X

8.2.6.37

Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH (Hard handover to another frequency with timing re-initialised)

X

8.2.6.37b

Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH (Hard handover to another frequency band cell with timing re-initialised)

X

8.2.6.38

Physical channel reconfiguration for transition from CELL_DCH to CELL_DCH (Hard handover to another frequency with timing re-initialised): Failure (Physical channel failure and reversion to old channel)

X

8.2.6.39

Physical Channel Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Seamless SRNS relocation) (without pending of ciphering)

X

8.2.6.44

Physical Channel Reconfiguration for transition from CELL_DCH to CELL_DCH: Failure (Radio link failure in new configuration)

X

8.3.1.1

RRC / Cell Update: cell reselection in CELL_FACH

X

8.3.1.1a

Cell Update: cell reselection in CELL_FACH (Cells belong to different frequency bands)

X

8.3.1.2

RRC / Cell Update: cell reselection in CELL_PCH

X

X

8.3.1.3

RRC / Cell Update: periodical cell update in CELL_FACH

X

8.3.1.4

RRC / Cell Update: periodical cell update in CELL_PCH

X

8.3.1.5

RRC / Cell Update: UL data transmission in URA_PCH

X

X

8.3.1.6

RRC / Cell Update: UL data transmission in CELL_PCH

X

X

8.3.1.9

RRC / Cell Update: re-entering of service area after T305 expiry and being out of service area

X

8.3.1.10

RRC / Cell Update: expiry of T307 after T305 expiry and being out of service area

X

8.3.1.11

RRC / Cell Update: Success after T302 time-out

X

8.3.1.12

RRC / Cell Update: Failure (After Maximum Re-transmissions)

X

8.3.1.15

RRC / Cell Update: Unrecoverable error in Acknowledged Mode RLC

X

8.3.1.17

RRC / Cell Update: Failure (UTRAN initiate an RRC connection release procedure on CCCH)

X

X

8.3.1.18

RRC / Cell Update: Radio Link Failure (T314>0, T315=0), CS RAB established

X

8.3.1.21

Cell Update: Cell reselection to cell of another PLMN belonging to the equivalent PLMN list

X

8.3.1.22

Cell update: Restricted cell reselection to a cell belonging to forbidden LA list (Cell_FACH)

X

8.3.1.23

Cell Update: HCS cell reselection in CELL_FACH

X

8.3.1.24

Cell Update: HCS cell reselection in CELL_PCH

X

8.3.1.25

CELL UPDATE: Radio Link Failure (T314=0, T315=0)

X

X

8.3.1.30

Cell Update: Radio Link Failure (T314>0, T315>0), PS RAB

X

8.3.1.31

Cell Update: re-entering of service area from URA_PCH after T316 expiry but before T317 expiry

X

8.3.2.1

RRC / URA Update: Change of URA

X

X

8.3.2.1a

URA Update: Change of URA (Cells belong to different frequency bands)

X

8.3.2.2

RRC / URA Update: Periodical URA update and Reception of Invalid message

X

8.3.2.4

RRC / URA Update: loss of service after expiry of timers T307 after T306

X

8.3.2.7

RRC / URA Update: Success after T303 timeout

X

8.3.2.9

RRC / URA Update: Failure ( UTRAN initiate an RRC connection release procedure on CCCH )

X

8.3.2.11

URA Update: Cell reselection to cell of another PLMN belonging to the equivalent PLMN list

X

8.3.2.12

Restricted cell reselection to a cell belonging to forbidden LA list (URA_PCH)

X

8.3.2.13

URA Update: Change of URA due to HCS Cell Reselection

X

8.3.3.1

RRC / UTRAN Mobility Information: Success

X

X

8.3.4.1

RRC / Active set update in soft handover: Radio Link addition

X

8.3.4.2

RRC / Active set update in soft handover: Radio Link removal

X

8.3.4.3

RRC / Active set update in soft handover: Combined radio link addition and removal

X

8.3.4.8

Active set update in soft handover: Radio Link addition in multiple radio link environment

X

8.4.1.1

Measurement Control and Report: Intra-frequency measurement for transition from idle mode to CELL_DCH state

X

8.4.1.1a

‘Measurement Control and Report: Intra-frequency measurement for transition from idle mode to CELL_DCH state (TDD)

X

8.4.1.2

RRC / Measurement Control and Report: Inter-frequency measurement for transition from idle mode to CELL_DCH state

X

8.4.1.2a

Measurement Control and Report: Inter-frequency measurement for transition from idle mode to CELL_DCH state (TDD)

X

8.4.1.2b

Measurement Control and Report: Inter-band measurement for transition from idle mode to CELL_DCH state (FDD)

X

8.4.1.3

RRC / Measurement Control and Report: Intra-frequency measurement for transition from idle mode to CELL_FACH state

X

8.4.1.3a

Measurement Control and Report: Intra-frequency measurement for transition from idle mode to CELL_FACH state (TDD)

X

8.4.1.5

RRC / Measurement Control and Report: Intra-frequency measurement for transition from CELL_DCH to CELL_FACH state

X

8.4.1.5a

Measurement Control and Report: Intra-frequency measurement for transition from CELL_DCH to CELL_FACH state (TDD)

X

8.4.1.6

RRC / Measurement Control and Report: Inter- frequency measurement for transition from CELL_DCH to CELL_FACH state

X

8.4.1.6a

Measurement Control and Report: Inter-frequency measurement for transition from CELL_DCH to CELL_FACH state (TDD)

X

8.4.1.7

RRC / Measurement Control and Report: Intra- frequency measurement for transition from CELL_FACH to CELL_DCH state

X

8.4.1.8

Measurement Control and Report: Inter-frequency measurement for transition from CELL_FACH to CELL_DCH state (FDD)

X

8.4.1.8a

Measurement Control and Report: Inter-frequency measurement for transition from CELL_FACH to CELL_DCH state (TDD)

X

8.4.1.14

RRC / Measurement Control and Report: Cell forbidden to affect reporting range

X

8.4.1.16

Measurement Control and Report: Traffic volume measurement for transition from idle mode to CELL_FACH state

X

X

8.4.1.17

RRC / Measurement Control and Report: Traffic volume measurement for transition from idle mode to CELL_DCH state

X

X

8.4.1.18

RRC / Measurement Control and Report: Traffic volume measurement for transition from CELL_FACH state to CELL_DCH state

X

8.4.1.19

RRC / Measurement Control and Report: Traffic volume measurement for transition from CELL_DCH to CELL_FACH state

X

8.4.1.23

RRC / Measurement Control and Report: Intra-frequency measurement for events 1C and 1D

X

8.4.1.24

RRC / Measurement Control and Report: Inter-frequency measurement for event 2A

X

X

8.4.1.24a

Measurement Control and Report: Inter-band measurement for event 2A

X

8.4.1.25

RRC / Measurement Control and Report: Inter-frequency measurement for events 2B and 2E

X

8.4.1.25a

Measurement Control and Report: Inter-band measurement for events 2B and 2E

X

8.4.1.26

RRC / Measurement Control and Report: Inter-frequency measurement for events 2D and 2F

X

8.4.1.27

RRC / Measurement Control and Report: UE internal measurement for events 6A and 6B

X

8.4.1.28

Measurement Control and Report: UE internal measurement for events 6F (FDD) and 6G

X

8.4.1.29

RRC / Measurement Control and Report: Event based Traffic Volume measurement in CELL_FACH state

X

8.4.1.30

RRC / Measurement Control and Report: Event based Traffic Volume measurement in CELL_DCH state

X

8.4.1.37

Measurement Control and Report: UE internal measurement, event 6c

X

8.4.1.38

Measurement Control and Report: UE internal measurement, event 6d

X

8.4.1.41

Measurement Control and Report: Additional Measurements list

X

8.4.1.42

Measurement Control and Report: Change of Compressed Mode Method

X