A.18 UTRAN TTCN-3 TS

34.123-33GPPPart 3: Abstract test suite (ATS)TSUser Equipment (UE) conformance specification

Table A.18-1 lists all approved test cases. An “X” in columns FDD or TDD indicates the test case approved for the respective variant.

Table A.18-1: UTRA TTCN test cases

Test case

Description

FDD

LCR_TDD

8.1.1.20

Paging / EAB active

X

8.1.5.7

UE Capability Information / Audit of UE Capabilities

X

8.3.1.1d

Inter-frequency absolute priority based reselection in CELL_FACH (Lower Priority)

X

8.3.1.1e

Inter-frequency absolute priority based reselection in CELL_FACH (Higher Priority)

X

8.3.1.1f

Inter-frequency reselection to a no priority layer when NW and UE supports absolute priority in CELL_FACH

X

8.6.2.1

Logged MDT / Intra-frequency measurement, logging and reporting / Idle mode

X

8.6.2.2

Logged MDT / Intra-frequency measurement, logging and reporting / CELL_PCH

X

8.6.2.3

Logged MDT / Inter-frequency measurement, logging and reporting / URA_PCH

X

9.4.3.3a

Location updating / abnormal cases / attempt counter equal to 4

X

9.4.3.7

Location updating / abnormal cases / Network reject with Extended Wait Timer

X

9.4.5.4.7

Location updating / periodic search for HPLMN or higher priority PLMN / UE waits Minimum Periodic search timer

X

9.4.5.5

Location updating / periodic per-device timer

X

9.4.10

NITZ / MM / Time zone, Time and DST Handling zone

X

9.4.11

Location Updating / EAB active

X

11.1.1.3

Dual priority / T3396 override

X

11.1.3.4

Network reject with Back-off Timer

X

11.1.5.1

Successful Secondary PDP Context Activation Procedure Initiated by the Network

X

11.1.5.2

Successful Secondary PDP Context Activation, Deactivation and Re-activation Initiated by the Network

X

11.2.1a

Network initiated PDP context modification / Adding and deleting filters to TFT of a secondary PDP context

X

11.2.1b

Network initiated PDP context modification / Adding filters to TFT of the Primary PDP context

X

11.3.2a

PDP context deactivation initiated by the network / secondary PDP context active / deactivation of primary PDP context

X

11.9.1

UE routing of uplink packets

X

12.2.1.1a

PS attach / accepted / Attach with IMSI

X

12.2.1.13

NITZ / GMM / Time zone, Time and DST Handling

X

12.2.1.14

NITZ / GMM / NITZ Parameters Storage and Deletion

X

12.2.1.15

NITZ / GMM / MM and GMM Signalling

X

12.2.1.16

PS attach / EAB active

X

12.2.2.3a

Combined PS attach / NMO-I enabled in UE

X

12.2.2.3c

Combined PS attach / congestion / GPRS services only

X

12.4.1.1d

Routing area updating / accepted / SMS via GPRS supported

X

12.4.1.4f

Routing area updating / rejected / Congestion

X

12.4.2.3b

Combined routing area updating / SMS only

X

12.4.2.3c

Combined routing area updating / congestion / GPRS services only

X

12.4.3.2a

Periodic routing area updating / accepted / per-device timer

X

14.6.1j

Interactive or background / UL: 64 DL: [max bit rate depending on UE category] with Flexible RLC and MAC-ehs PS RAB + UL: 3.4 DL: 3.4 kbps SRBs for DCCH / DL: QPSK, 16QAM, 64QAM and 3C – 3C on Single Band (3-0)

X

14.6.1k

Interactive or background / UL: 64 DL: [max bit rate depending on UE category] with Flexible RLC and MAC-ehs PS RAB + UL: 3.4 DL: 3.4 kbps SRBs for DCCH / DL: QPSK, 16QAM, 64QAM and 3C – 3C on Dual Band (2-1)

X

15.1.1

CLIP/ Normal operation

X

15.2.1

CLIR/ Normal operation – requesting presentation of CLI

X

15.2.2

CLIR/ Normal operation – requesting restriction of CLI presentation

X

15.3.1

CNAP/Normal Operation – Name indication contained in Setup message

X

15.3.2

CNAP/Normal Operation – Name indication contained in Facility message

X

15.3.3

CNAP/Interrogation accepted

X

15.3.4

CNAP/Interrogation rejected

X

15.4.1

Call forwarding supplementary services, Registration accepted

X

15.4.2

Call forwarding supplementary services, Registration rejected

X

15.4.3

Call forwarding supplementary services, Erasure accepted

X

15.4.4

Call forwarding supplementary services, Erasure rejected

X

15.4.5

Call forwarding supplementary services, Activation

X

15.4.6

Call forwarding supplementary services, Deactivation

X

15.4.7

Call forwarding supplementary services, Interrogation accepted

X

15.4.8

Call forwarding supplementary services, Interrogation rejected

X

15.5.1

Call completion supplementary services, Waiting call indication and confirmation

X

15.5.2

Call completion supplementary services, Waiting call accepted; existing call released

X

15.5.3

Call waiting, Waiting call accepted; existing on call hold, no additional calls

X

15.5.4

Call completion supplementary services, Existing call released by user A; waiting call accepted

X

15.5.5

Call completion supplementary services, Waiting call released by subscriber B

X

15.5.6

Call completion supplementary services, Waiting call released by calling user C

X

15.5.7

Call completion supplementary services, Activation

X

15.5.8

Call completion supplementary services, Deactivation

X

15.6.1

Call completion supplementary services, Hold invocation

X

15.6.2

Call completion supplementary services, Retrieve procedure

X

15.6.3

Call completion supplementary services, Alternate from one call to the other

X

15.7.1

Multi-party supplementary services, Beginning the MultiParty service, successful case

X

15.7.2

Multi-party supplementary services, Beginning the MultiParty service, unsuccessful case

X

15.7.3

Multi-party supplementary services, Beginning the MultiParty service, expiry of timer T(BuildMPTY)

X

15.7.4

Multi-party, Managing an active MultiParty call, Put the MultiParty call on hold, successful case

X

15.7.5

Multi-party, Managing an active MultiParty call, Put the MultiParty call on hold, unsuccessful case

X

15.7.6

Multi-party, Managing an active MultiParty call, Put the MultiParty call on hold, expiry of timer T(HoldMPTY)

X

15.7.7

Multi-party, Managing an active MultiParty call, Create a private communication with one of the remote parties, successful case

X

15.7.8

Multi-party, Managing an active MultiParty call, Create a private communication with one of the remote parties, unsuccessful case

X

15.7.9

Multi-party, Managing an active MultiParty call, Create a private communication with one of the remote parties, expiry of timer T (SplitMPTY)

X

15.7.10

Multi-party supplementary services, Terminate the entire MultiParty call

X

15.7.11

Multi-party supplementary services, Explicitly disconnect a remote party

X

15.7.12

Multi-party supplementary services, Release from the MultiParty call

X

15.7.13

Multi-party supplementary services, Retrieve the held MultiParty call, successful case

X

15.7.14

Multi-party supplementary services, Retrieve the held MultiParty call, unsuccessful case

X

15.7.15

Multi-party supplementary services, Retrieve the held MultiParty call, expiry of timer T(RetrieveMPTY)

X

15.7.16

Multi-party supplementary services, Initiate a new call

X

15.7.17

Multi-party supplementary services, Process a call waiting request

X

15.7.18

Multi-party supplementary services, Terminate the held MultiParty call

X

15.7.19

Multi-party, Managing a single call and a MultiParty call, Disconnect the single call, single call active

X

15.7.20

Multi-party, Managing a single call and a MultiParty call, Disconnect the single call, single call held

X

15.7.21

Clear all parties of held MultiParty call

X

15.7.22

Clear all parties of active MultiParty call

X

15.7.23

Multi-party supplementary services, Disconnect all calls

X

15.7.24

Multi-party supplementary services, Add the single call to the MPTY, successful case

X

15.7.25

Multi-party supplementary services, Add the single call to the MPTY, maximum number of participants exceeded

X

15.7.26

Multi-party supplementary services, Alternate between the MPTY call and the single call

X

15.7.27

Multi-party supplementary services, Adding extra remote parties

X

15.8.1

Registration accepted

X

15.8.2

Rejection after invoke of the operation “register password” with SS subscription violation

X

15.8.3

Rejection after password check with negative result

X

15.8.4

Activation accepted

X

15.8.5

Rejection after invoke of ActivateSS operation

X

15.8.6

Deactivation accepted

X

15.8.7

Rejection after invoke of DeactivateSS operation

X

15.8.8

Rejection after use of password procedure

X

15.8.9

Normal operation

X

15.9.1

ProcessUnstructuredSS-request/accepted

X

15.9.2

ProcessUnstructuredSS-request/cross phase compatibility and error handling

X

15.9.3

UnstructuredSS-Notify/accepted

X

15.9.4

UnstructuredSS-Notify/rejected on user busy

X

15.9.5

UnstructuredSS-Request/accepted

X

15.9.6

MMI input for USSD

X

15.10.1

Explicit Call Transfer invocation, successful case, both calls active, clearing using DISCONNECT

X

15.10.2

Explicit Call Transfer invocation, successful case, both calls active, clearing using RELEASE

X

15.10.3

Explicit Call Transfer invocation, successful case, both calls active, clearing using RELEASE COMPLETE

X

15.10.4

Explicit Call Transfer invocation, successful case, second call alerting

X

15.10.5

Explicit Call Transfer invocation, expiry of T(ECT)

X

The Test Suite in TTCN3 is contained in multiple ASCII files which accompany the present document.

Annex B (normative):
Partial IXIT proforma

Notwithstanding the provisions of the copyright related to the text of the present document, The Organizational Partners of 3GPPgrant that users of the present document may freely reproduce the partial IXIT proforma in this annex so that it can be used for its intended purposes and may further publish the completed partial IXIT.