A.16 HSPA8_ENH TTCN-2 ATS
34.123-33GPPPart 3: Abstract test suite (ATS)TSUser Equipment (UE) conformance specification
The approved HSPA8_ENH test cases are listed. An “X” in columns FDD or LCR TDD indicates the test case approved for the relevant ATS.
Table A.16: HSPA and Rel-8 enhancement TTCN test cases
Test case |
Description |
FDD |
LCR_TDD |
6.1.2.12 |
Cell reselection based on absolute priority in SIB19 |
X |
|
6.3.1.1 |
Manual CSG ID Selection |
X |
|
6.3.1.2 |
UE in automatic network selection mode to select a suitable CSG cell |
X |
|
6.3.2.1 |
Intra-frequency cell reselection from a non-CSG cell to an allowed CSG cell |
X |
|
6.3.2.2 |
Inter-frequency cell reselection from a non-CSG cell to an allowed CSG cell |
X |
|
6.3.3.1 |
Intra frequency CSG Cell Reselection / UE is in Idle, Cell_PCH and URA_PCH states |
X |
|
6.3.3.2 |
Inter-frequency cell reselection from a non-CSG cell to an allowed CSG cell |
X |
|
7.1.7.1 |
MAC-i/is multiplexing (multiple PDUs from different LC in one TTI) |
X |
|
7.1.7.2 |
MAC-i/is segmentation / Correct Usage of Segmentation Status Field |
X |
|
7.1.7.3 |
Correct settings of MAC-i/is header fields |
X |
|
7.1.7.4 |
MAC-is/i transport block size selection/ UL QPSK |
X |
|
7.1.7.5 |
MAC-is/i transport block size selection/ UL 16QAM |
X |
|
7.1.8.1 |
Release of common E-DCH resource when maximum resource allocation for E-DCH expires or uplink transmission ends for CCCH transmission |
X |
|
7.1.8.7 |
Physical Channel Failure for EUL in CELL-FACH during initial access preamble |
X |
|
7.2.2.15 |
Flexible handling of RLC PDU sizes for UM RLC in uplink |
X |
|
7.2.3.37 |
RLC PDU Size Adaptation in Uplink |
X |
|
7.2.3.38 |
Flexible handling of RLC PDU sizes for AM RLC in uplink |
X |
|
7.3.7.1 |
PDCP AMR Data PDU testing |
X |
|
7.3.7.2 |
PDCP Unrecoverable Error Detection |
X |
|
8.1.1.13 |
ETWS primary and secondary notification without security reception via S-CCPCH in idle mode, URA_PCH and CELL_PCH state / CELL_FACH state |
X |
|
8.1.1.19 |
ETWS primary and secondary notification / Cell reselection |
X |
|
8.1.2.26 |
RRC Connection Establishment / Paging Permission with Access Control: Success |
X |
|
8.1.9c |
Signalling Connection Release Indication in Cell_FACH/Cell_DCH state when the upper layers of the UE indicate that there is no more PS data for a prolonged period |
X |
|
8.1.9d |
Signalling connection release indication in CELL_DCH state when the upper layers of the UE indicate that there is no more PS data for a prolonged period, CS connection exists |
X |
|
8.1.9e |
No Signalling connection release indication in Cell_PCH state when the upper layers of the UE indicate that there is no more PS data for a prolonged period |
X |
|
8.1.9f |
Signalling Connection Release Indication in Cell_FACH state when the upper layers of the UE indicate that there is no more PS data for a prolonged period |
X |
|
8.2.1.42 |
Radio Bearer Establishment for transition from CELL_FACH (Enhanced UL/DL) to CELL_DCH : Success (with ongoing HS-DSCH reception and E-DCH transmission) |
X |
|
8.2.2.58 |
Radio Bearer Reconfiguration for transition from CELL_DCH to CELL_DCH: Success (Reconfigurations between CS voice over DCH and CS voice over HSPA) |
X |
|
8.2.2.61 |
Radio Bearer Reconfiguration from CELL_DCH to CELL_DCH: Success (Reconfiguration between fixed and flexible AM RLC, Serving E-DCH cell change between MAC-e/es and MAC-i/is) |
X |
|
8.3.1.48 |
Cell Update: Radio Link Failure, UM RLC Re-establishment |
X |
|
8.3.1.52 |
Cell Update: Inter Frequency cell reselection in CELL_FACH based on absolute priority |
X |
|
8.3.1.53 |
Cell Update: Absolute priority based cell reselection failure to inter frequency cell for which no priority or no threshold is assigned |
X |
|
8.3.1.54 |
Cell Update: Absolute priority based cell reselection when more than one cell fulfills the criterion |
X |
|
8.3.4.15 |
Active set update: Dual Cell (DC) Activation by Serving Cell Change from non DC-HSDPA capable cell to DC-HSDPA capable cell |
X |
|
8.3.4.15a |
Active set update: Dual Cell (DC) Activation by Serving Cell Change from non DC-HSDPA capable cell to DC-HSDPA capable cell with SRB mapped on E-DCH/DCH |
X |
|
8.3.4.16 |
Active set update: Dual Cell (DC) Activation by Serving Cell Change from DC-HSDPA capable cell to non DC-HSDPA capable cell |
X |
|
8.3.4.16a |
Active set update: Dual Cell (DC) Activation by Serving Cell Change from DC-HSDPA capable cell to non DC-HSDPA capable cell with SRB mapped on E-DCH/DCH |
X |
|
9.4.2.6 |
Location updating / rejected / Not authorized for this CSG |
X |
|
12.2.1.5e |
PS attach / rejected / Not authorized for this CSG |
X |
|
12.2.2.7e |
Combined PS attach / rejected / Not authorized for this CSG |
X |
|
12.2.2.10 |
Combined PS attach / abnormal cases / access barred due to paging permission with access control |
X |
|
12.3.1.10 |
UE initiated detach/abnormal case/ Not authorized for this CSG |
X |
|
12.4.1.4e |
Routing area updating / rejected / Not authorized for this CSG |
X |
|
12.4.2.5e |
Combined routing area updating / rejected / Not authorized for this CSG |
X |
|
12.9.7d |
Service request/rejected/Not authorized for this CSG |
X |
|
13.3.1.2 |
Test Call using eCall capable UE with eCall only subscription |
X |
|
13.3.1.3 |
Manually initiated eCall using eCall capable UE with “eCall only” subscription on USIM |
X |
|
13.3.1.4 |
Reconfiguration Call using eCall capable UE with an ‘eCall only’ subscription on USIM |
X |
|
13.3.1.5 |
Manually initiated eCall using eCall capable UE with eCall and non eCall subscriptions on USIM |
X |
|
13.3.1.6 |
eCall Inactivity State after T3242 expires |
X |
|
13.3.1.7 |
Automatically initiated eCall |
X |
|
13.3.1.10 |
eCall Inactivity State after T3243 expires |
X |
|
14.6.1e |
Interactive or background / UL:64 DL: [max bit rate depending on UE category] with Flexible RLC and MAC-ehs PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH / DL: 64QAM and MIMO |
X |
|
14.6.1f |
Interactive or background / UL:64 DL: [max bit rate depending on UE category] with Flexible RLC and MAC-ehs PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH / DL: QPSK, 16QAM and Dual-Cell |
X |
|
14.6.1g |
Interactive or background / UL:64 DL: [max bit rate depending on UE category] with Flexible RLC and MAC-ehs PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH / DL: 64QAM and Dual-Cell |
X |
|
14.6.6d |
Streaming / unknown / UL:128 DL: [guaranteed 128, max bit rate depending on UE category] with Fixed RLC and MAC-ehs / PS RAB + Interactive or background / UL:128 DL: [max bit rate depending on UE category] with Flexible RLC and MAC-ehs / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH / DL: 64QAM and MIMO |
X |
|
14.6.6e |
Streaming / unknown / UL:128 DL: [guaranteed 128, max bit rate depending on UE category] with Fixed RLC and MAC-ehs / PS RAB + Interactive or background / UL:128 DL: [max bit rate depending on UE category] with Flexible RLC and MAC-ehs / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH / DL: QPSK, 16QAM and Dual-Cell |
X |
|
14.6.6f |
Streaming / unknown / UL:128 DL: [guaranteed 128, max bit rate depending on UE category] with Fixed RLC and MAC-ehs / PS RAB + Interactive or background / UL:128 DL: [max bit rate depending on UE category] with Flexible RLC and MAC-ehs / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH / DL: 64QAM and Dual-Cell |
X |
|
14.7.3a |
Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] with Flexible RLC, MAC-ehs and MAC-i/is / PS RAB + UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] SRBs for DCCH on E-DCH and HS-DSCH with MAC-ehs and MAC-i/is |
X |
|
14.7.6c |
Conversational / unknown or speech / UL:[max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] kbps with Flexible RLC, MAC-ehs and MAC-i/is / PS RAB + Streaming or Interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] with Fixed RLC, MAC-ehs and MAC-i/is / PS RAB + UL:[max bit rate depending on UE category and TTI] DL: :[max bit rate depending on UE category] SRBs for DCCH on E-DCH and HS-DSCH with MAC-ehs and MAC-i/is / UL: QPSK and DL: QPSK |
X |
|
14.7.9 |
Conversational / speech / UL:(12.2, 7.95, 5.9, 4.75) kbps DL: (12.2, 7.95, 5.9, 4.75) kbps / CS RAB on E-DCH and HS-DSCH + UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] SRBs for DCCH on E-DCH and HS-DSCH |
X |
|
14.7.10 |
Conversational / speech / UL:(12.65, 8.85, 6.6) kbps DL: (12.65, 8.85, 6.6) kbps / CS RAB on E-DCH and HS-DSCH + UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] SRBs for DCCH on E-DCH and HS-DSCH |
X |
|
14.7.11 |
Streaming or interactive or background / UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] / PS RAB + UL: [max bit rate depending on UE category and TTI] DL: [max bit rate depending on UE category] SRBs for DCCH on E-DCH and HS-DSCH for enhanced uplink/downlink in CELL_FACH |
X |
A.16.1 Void
A.16.2 The TTCN Machine Processable form (TTCN.MP)
The TTCN.MP representation corresponding to the corresponding FDD or LCR_TDD ATS is contained in an ASCII file (HSPA8_ENH.MP) which accompanies the present document.