8.3 Channels configurations
34.123-33GPPPart 3: Abstract test suite (ATS)TSUser Equipment (UE) conformance specification
8.3.1 Configuration of Cell_FACH
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RRC tests related in the states CELL_FACH, CELL_PCH and URA_PCH. They need a minimum radio configuration for testing.
Table 8.3.1.1: Uplink configuration of Cell_FACH
|
RB Identity |
tsc_RB20 (20) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
LogCh Identity |
Tsc_UL_DTCH1 (7) |
tsc_UL_CCCH5 (5) |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
|
RLC mode |
AM |
TM |
UM |
AM |
AM |
AM |
|
TrCH Type |
RACH |
|||||
|
TrCH identity |
tsc_RACH1 (15) |
|||||
|
PhyCh Type |
PRACH |
|||||
|
PhyCH identity |
tsc_PRACH1 (8) |
|||||
Table 8.3.1.2: Downlink configuration of Cell_FACH
|
RB Identity |
tsc_RB20 (20) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
PCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_CCCH5 (5) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
tsc_PCCH1 (1) |
|
RLC mode |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
TM |
|
MAC priority |
1 |
1 |
2 |
3 |
4 |
5 |
6 |
1 |
|
TrCH Type |
FACH |
FACH |
PCH |
|||||
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
|||||
|
PhyCh Type |
Secondary CCPCH |
|||||||
|
PhyCH identity |
tsc_S_CCPCH1 (5) |
|||||||
8.3.1a Configuration of Cell_FACH_NoDedicated
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RRC tests related in the states for a non serving cell without DCCH/DTCH.
Table 8.3.1a.1: Uplink configuration of Cell_FACH_NoDedicated
|
RB Identity |
tsc_RB0 (0) |
|
LogCh Type |
CCCH |
|
LogCh Identity |
tsc_UL_CCCH5 (5) |
|
RLC mode |
TM |
|
TrCH Type |
RACH |
|
TrCH identity |
tsc_RACH1 (15) |
|
PhyCh Type |
PRACH |
|
PhyCH identity |
tsc_PRACH1 (8) |
Table 8.3.1a.2: Downlink configuration of Cell_FACH_NoDedicated
|
RB Identity |
tsc_RB0 (0) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
|
LogCh Type |
CCCH |
BCCH |
PCCH |
|
LogCh Identity |
tsc_DL_CCCH5 (5) |
tsc_BCCH6 (6) |
tsc_PCCH1 (1) |
|
RLC mode |
UM |
TM |
TM |
|
MAC priority |
1 |
6 |
1 |
|
TrCH Type |
FACH |
PCH |
|
|
TrCH identity |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
|
|
PhyCh Type |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_S_CCPCH1 (5) |
||
8.3.2 Configuration of Cell_DCH_StandAloneSRB
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.1. 3. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to the RRC and NAS signalling tests in the DCH state without RAB.
Table 8.3.2.1: Uplink configuration of Cell_DCH_StandAloneSRB
|
RB Identity |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB0 (0) |
|
|
LogCh Type |
DCCH |
DCCH |
DCCH |
DCCH |
CCCH |
|
|
LogCh Identity |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
tsc_UL_CCCH5 (5) |
|
|
RLC mode |
UM |
AM |
AM |
AM |
TM |
AM |
|
TrCH Type |
DCH |
RACH |
||||
|
TrCH identity |
tsc_UL_DCH5 (5) |
tsc_RACH1 (15) |
||||
|
PhyCh Type |
DPDCH |
PRACH |
||||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
||||
Table 8.3.2.2: Downlink configuration of Cell_DCH_StandAloneSRB
|
RB Identity |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB0 (0) |
tsc_RB_PCCH (-2) |
|
|
LogCh Type |
DCCH |
DCCH |
DCCH |
DCCH |
CCCH |
PCCH |
|
|
LogCh Identity |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_DL_CCCH5 (5) |
tsc_PCCH1 (1) |
|
|
RLC mode |
UM |
AM |
AM |
AM |
UM |
TM |
AM |
|
MAC priority |
1 |
2 |
3 |
4 |
1 |
1 |
1 |
|
TrCH Type |
DCH |
FACH |
PCH |
FACH |
|||
|
TrCH identity |
tsc_DL_DCH5 (10) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
tsc_FACH2 (14) |
|||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|||||
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|||||
8.3.3 Configuration of Cell_DCH_Speech
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.1.4 and 6.10.2.4.1.5. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to those RRC and NAS signalling tests in the DCH state where a CS voice service, such as narrowband speech, emergency speech call or TS 61 for speech, is established.
Table 8.3.3.1: Uplink configuration of Cell_DCH_Speech
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
tsc_UL_DTCH3 (9) |
||
|
RLC mode |
TM |
TM |
TM |
||
|
TrCH Type |
DCH |
DCH |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
tsc_UL_DCH2 (2) |
tsc_UL_DCH3 (3) |
||
|
PhyCh Type |
DPDCH |
PRACH |
|||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|||
Table 8.3.3.2: Downlink configuration of Cell_DCH_Speech
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
||
|
RLC mode |
TM |
TM |
TM |
||
|
MAC priority |
1 |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
tsc_DL_DCH3 (8) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|||
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|||
8.3.4 Configuration of Cell_DCH_64kCS_RAB_SRB
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.1.13 for the conversational unknown quality class. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to those RRC and NAS signalling tests in the DCH state where one of the following CS transparent data services is established:
– Multimedia call 28,8 kbit/s, 3,1 kHz Audio;
– Multimedia call 32 kbit/s, UDI;
– Multimedia call 33,6 kbit/s, 3,1 kHz Audio;
– Multimedia call 56 kbit/s, RDI;
– Multimedia call 64 kbit/s, UDI;
– Asynchronous 3,1 kHz Audio 28,8 kbit/s;
– Synchronous 3,1 kHz Audio 28,8 kbit/s;
– Synchronous V.110 UDI up to 56 kbit/s;
– BTM RDI 56 kbit/s;
– BTM UDI 64 bit/s.
Table 8.3.4.1: Uplink configuration of Cell_DCH_64kCS_RAB_SRB
|
RB Identity |
tsc_RB10 (10) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
||
|
PhyCh Type |
DPDCH |
PRACH |
|
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|
Table 8.3.4.2: Downlink configuration of Cell_DCH_64kCS_RAB_SRB
|
RB Identity |
tsc_RB10 (10) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
MAC priority |
1 |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|
8.3.5 Configuration of Cell_DCH_57_6kCS_RAB_SRB
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.1.17 for the streaming unknown quality class. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to those RRC and NAS signalling tests in the DCH state where one of the following CS non-transparent data services is established:
– Asynchronous 3,1 kHz Audio up to 19,2 kbit/s;
– Asynchronous 3,1 kHz Audio modem auto-bauding;
– Asynchronous V.110 UDI up to 38,4 kbit/s, except 28,8 kbit/s;
– Asynchronous V.120 up to 56 kbit/s;
– Asynchronous PIAFS up to 64 kbit/s;
– Asynchronous FTM up to 64 kbit/s;
– Synchronous 3,1 kHz Audio up to 19,2 kbit/s;
– Synchronous V.110 UDI up to 56 kbit/s, except 28,8 kbit/s;
– Synchronous X.31 Flags Stuffing UDI up to 56 kbit/s;
– Synchronous V.120 up to 56 kbit/s;
– Synchronous BTM up to 64 kbit/s;
– TS61 FAX.
Table 8.3.5.1: Uplink configuration of Cell_DCH_57_6kCS_RAB_SRB
|
RB Identity |
tsc_RB10 (10) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
||
|
PhyCh Type |
DPDCH |
PRACH |
|
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|
Table 8.3.5.2: Downlink configuration of Cell_DCH_57_6kCS_RAB_SRB
|
RB Identity |
tsc_RB10 (10) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
MAC priority |
1 |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|
8.3.6 Configuration of Cell_RLC_DCH_RAB
The configuration is based on 3GPP TS 34.108 [3], clauses 6.11.1, 6.11.2, 6.11.3, and 6.11.4 for the RLC AM and UM tests with 7 and 15 bit length indicators. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The RB Ids used for the DTCH depend on the RLC mode and length indicator size being simulated (reference clause 6.5.2, RLC test method). Table 8.3.6.1 shows the test suite constants used for each RLC mode, and length indicator size.
Table 8.3.6.1: RB Ids used for DTCH depending on RLC mode and LI size
|
RLC mode |
LI Size |
TSC |
RB Id |
|
UM |
7 |
tsc_RB_UM_7_RLC |
-10 |
|
UM |
15 |
tsc_RB_UM_15_RLC |
-11 |
|
AM |
7 |
tsc_RB_AM_7_RLC |
-12 |
|
AM |
15 |
tsc_RB_AM_15_RLC |
-13 |
Table 8.3.6.2: Uplink configuration of Cell_RLC_DCH_RAB
|
RB Identity |
See table 8.3.6.1 |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
||
|
PhyCh Type |
DPDCH |
PRACH |
|
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|
Table 8.3.6.3: Downlink configuration of Cell_RLC_DCH_RAB
|
RB Identity |
See table 8.3.6.1 |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
MAC priority |
1 |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|
8.3.7 Configuration of Cell_FACH_BMC
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 without RAB/DTCH for uplink. A RB30/CTCH is configured. The configuration is applied to the BMC and CBSMS tests.
The uplink configuration of Cell_FACH_BMC is the same as the uplink configuration of Cell_FACH.
Table 8.3.7.1: Downlink configuration of Cell_FACH_BMC
|
RB Identity |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
Tsc_RB30 (30) |
tsc_RB_PCCH (-2) |
|
|
LogCh Type |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
CTCH |
PCCH |
|
|
LogCh Identity |
tsc_DL_CCCH5 (5) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
Tsc_CTCH (11) |
tsc_PCCH1 (1) |
|
|
RLC mode |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
UM |
TM |
|
MAC priority |
1 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
1 |
|
TrCH Type |
FACH |
FACH |
PCH |
||||||
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
||||||
|
PhyCh Type |
Secondary CCPCH |
||||||||
|
PhyCH identity |
tsc_S_CCPCH1 (5) |
||||||||
8.3.8 Configuration of PS Cell_DCH_64kPS_RAB_SRB and Cell_PDCP_AM_RAB
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.1.26. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to those RRC and NAS signalling tests in the DCH state where a PS RAB on DTCH is setup for the interactive or background service class. The configuration is applied to PDCP test cases in acknowledge mode.
Table 8.3.8.1: Uplink configuration of PS Cell_DCH_64kPS_RAB_SRB SRB and Cell_PDCP_AM_RAB
|
RB Identity |
tsc_RB20 (20) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
AM |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
||
|
PhyCh Type |
DPDCH |
PRACH |
|
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|
Table 8.3.8.2: Downlink configuration of PS Cell_DCH_64kPS_RAB_SRB SRB and Cell_PDCP_AM_RAB
|
RB Identity |
tsc_RB20 (20) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
AM |
||
|
MAC priority |
1 |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|
8.3.9 Configuration of Cell_Two_DTCH
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.1.6 to 6.10.2.4.1.11. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to RB tests.
Table 8.3.9.1: Uplink configuration of Cell_Two_DTCH
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
||
|
RLC mode |
TM |
TM |
||
|
TrCH Type |
DCH |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
tsc_UL_DCH2 (2) |
||
|
PhyCh Type |
DPCH |
PRACH |
||
|
PhyCH identity |
tsc_UL_DPDCH1 (20) |
tsc_PRACH1 (8) |
||
Table 8.3.9.2: Downlink configuration of Cell_Two_DTCH
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
||
|
RLC mode |
TM |
TM |
||
|
MAC priority |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
||
8.3.10 Configuration of Cell_Single_DTCH (CS)
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.1.12 to 6.10.2.4.1.22. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to RB tests.
Table 8.3.10.1: Uplink configuration of Cell_Single_DTCH (CS)
|
RB Identity |
tsc_RB10 (10) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
||
|
PhyCh Type |
DPDCH |
PRACH |
|
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|
Table 8.3.10.2: Downlink configuration of Cell_Single_DTCH (CS)
|
RB Identity |
tsc_RB10 (10) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
MAC priority |
1 |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|
8.3.11 Configuration of PS Cell_PDCP_UM_RAB
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.1.26. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to PDCP test cases in unacknowledge mode.
Table 8.3.11.1: Uplink configuration of PS Cell_PDCP_UM_RAB
|
RB Identity |
tsc_RB21 (21) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
UM |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
||
|
PhyCh Type |
DPDCH |
PRACH |
|
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|
Table 8.3.11.2: Downlink configuration of PS Cell_PDCP_UM_RAB
|
RB Identity |
tsc_RB21 (21) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
UM |
||
|
MAC priority |
1 |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|
8.3.12 Configuration of PS Cell_PDCP_AM_UM_RAB
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.1.26. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to PDCP test cases using both the acknowledged and unacknowledged mode.
Table 8.3.12.1: Uplink configuration of PS Cell_PDCP_AM_UM_RAB
|
RB Identity |
tsc_RB20 (20) |
tsc_RB21 (21) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
||
|
RLC mode |
AM |
UM |
||
|
TrCH Type |
DCH |
|||
|
TrCH identity |
tsc_UL_DCH1 (1) |
|||
|
PhyCh Type |
DPDCH |
PRACH |
||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
||
Table 8.3.12.2: Downlink configuration of PS Cell_PDCP_AM_UM_RAB
|
RB Identity |
tsc_RB20 (20) |
tsc_RB21 (21) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
||
|
RLC mode |
AM |
UM |
||
|
MAC priority |
1 |
1 |
||
|
TrCH Type |
DCH |
|||
|
TrCH identity |
tsc_DL_DCH1 (6) |
|||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
||
8.3.13 Configuration of Cell_2SCCPCH_BMC
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 without RAB/DTCH for uplink. RB30/CTCH and RB31/CTCH as well as two PCCH are configured. The configuration is applied to the BMC and CBSMS tests.
Table 8.3.13.1: Uplink configuration of Cell_2SCCPCH_BMC
|
RB Identity |
tsc_RB20 (20) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
Tsc_RB3 (3) |
tsc_RB4 (4) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
LogCh Identity |
Tsc_UL_DTCH1 (7) |
tsc_UL_CCCH5 (5) |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
|
RLC mode |
AM |
TM |
UM |
AM |
AM |
AM |
|
TrCH Type |
RACH |
|||||
|
TrCH identity |
tsc_RACH1 (15) |
|||||
|
PhyCh Type |
PRACH |
|||||
|
PhyCH identity |
tsc_PRACH1 (8) |
|||||
Table 8.3.13.2: Downlink configuration of Cell_2SCCPCH_BMC: second S-CCPCH
|
RB Identity |
Tsc_RB31 (31) |
tsc_RB_2ndPCCH (-4) |
|
LogCh Type |
CTCH |
PCCH |
|
LogCh Identity |
Tsc_CTCH2 (12) |
tsc_PCCH2 (2) |
|
RLC mode |
UM |
TM |
|
MAC priority |
1 |
1 |
|
TrCH Type |
FACH |
PCH |
|
TrCH identity |
tsc_FACH1 (13) |
tsc_PCH2 (30) |
|
PhyCh Type |
Secondary CCPCH |
|
|
PhyCH identity |
tsc_S_CCPCH2 (10) |
|
Table 8.3.13.3: Downlink configuration of Cell_2SCCPCH_BMC: first S-CCPCCH
|
RB Identity |
tsc_RB20 (20) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
Tsc_RB30 (30) |
tsc_RB_PCCH (-2) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
CTCH |
PCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (6) |
tsc_DL_CCCH5 (5) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
Tsc_CTCH1 (11) |
tsc_PCCH1 (1) |
|
RLC mode |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
UM |
TM |
|
MAC priority |
1 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
1 |
|
TrCH Type |
FACH |
FACH |
PCH |
||||||
|
TrCH identity |
Tsc_FACH2 (14) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
||||||
|
PhyCh Type |
Secondary CCPCH |
||||||||
|
PhyCH identity |
tsc_S_CCPCH1 (5) |
||||||||
8.3.14 Configuration of Cell_Four_DTCH_CS_PS, Cell_Four_DTCH_PS_CS
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.1.40. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to RB tests.
Table 8.3.14.1: Uplink configuration of Cell_Four_DTCH_CS_PS
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
tsc_RB20 (20) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
tsc_UL_DTCH3 (9) |
tsc_UL_DTCH4 (10) |
||
|
RLC mode |
TM |
TM |
TM |
AM |
||
|
MAC priority |
1 |
1 |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
DCH |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
tsc_UL_DCH2 (2) |
tsc_UL_DCH3 (3) |
tsc_UL_DCH4 (4) |
||
|
PhyCh Type |
DPDCH |
PRACH |
||||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
||||
Table 8.3.14.2: Downlink configuration of Cell_Four_DTCH_CS_PS, Cell_Four_DTCH_PS_CS
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
tsc_RB20 (20) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
tsc_DL_DTCH4 (10) |
||
|
RLC mode |
TM |
TM |
TM |
AM |
||
|
MAC priority |
1 |
1 |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
DCH |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
Tsc_DL_DCH3 (8) |
tsc_DL_DCH4 (9) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
||||
|
PhyCH identity |
tsc_DL_DPCH1 (20) |
tsc_S_CCPCH1 (5) |
||||
8.3.14a Configuration of Cell_Five_DTCH_CS_PS
The configuration is based on 3GPP TS 34.108 [3], clauses 6.11.5.4.1.67. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to LCR TDD RB tests.
Table 8.3.14a.1: Uplink configuration of Cell_Five_DTCH_CS_PS
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
tsc_RB20 (20) |
tsc_RB22 (22) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
tsc_UL_DTCH3 (9) |
tsc_UL_DTCH4 (10) |
tsc_UL_DTCH5 (13) |
||
|
RLC mode |
TM |
TM |
TM |
AM |
AM |
||
|
MAC priority |
1 |
1 |
1 |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
DCH |
DCH |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
tsc_UL_DCH2 (2) |
tsc_UL_DCH3 (3) |
tsc_UL_DCH4 (4) |
tsc_UL_DCH5 (5) |
||
|
PhyCh Type |
DPDCH |
PRACH |
|||||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|||||
Table 8.3.14a.2: Downlink configuration of Cell_Five_DTCH_CS_PS
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
tsc_RB20 (20) |
tsc_RB22 (22) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
tsc_DL_DTCH4 (10) |
tsc_UL_DTCH5 (11) |
||
|
RLC mode |
TM |
TM |
TM |
AM |
AM |
||
|
MAC priority |
1 |
1 |
1 |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
DCH |
DCH |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
Tsc_DL_DCH3 (8) |
tsc_DL_DCH4 (9) |
tsc_DL_DCH5 (10) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|||||
|
PhyCH identity |
tsc_DL_DPCH1 (20) |
tsc_S_CCPCH1 (5) |
|||||
8.3.15 Configuration of Cell_Two_DTCH_CS_PS, Cell_Two_DTCH_PS_CS
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.1.51 and 6.10.2.4.1.53. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to RB tests.
Table 8.3.15.1:Uplink configuration of Cell_Two_DTCH_CS_PS, Cell_Two_DTCH_PS_CS
|
RB Identity |
tsc_RB10 (10) |
tsc_RB20 (20) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
||
|
RLC mode |
TM |
AM |
||
|
TrCH Type |
DCH |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
tsc_UL_DCH2 (2) |
||
|
PhyCh Type |
DPDCH |
PRACH |
||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
||
Table 8.3.15.2: Downlink configuration of Cell_Two_DTCH_CS_PS
|
RB Identity |
tsc_RB10 (10) |
tsc_RB20 (20) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
||
|
RLC mode |
TM |
AM |
||
|
MAC priority |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_DL_DPCH1 (20) |
tsc_S_CCPCH1 (5) |
||
8.3.16 Configuration of Cell_Four_DTCH_CS
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.1.49. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to RB tests.
Table 8.3.16.1: Uplink configuration of Cell_Four_DTCH_CS
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
tsc_RB13 (13) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (1) |
tsc_UL_DTCH2 (2) |
tsc_UL_DTCH3 (3) |
tsc_UL_DTCH4 (4) |
||
|
RLC mode |
TM |
TM |
TM |
TM |
||
|
MAC priority |
1 |
1 |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
DCH |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (6) |
tsc_UL_DCH2 (7) |
tsc_UL_DCH3 (8) |
tsc_UL_DCH4 (9) |
||
|
PhyCh Type |
DPDCH |
PRACH |
||||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
||||
Table 8.3.16.2: Downlink configuration of Cell_Four_DTCH_CS
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
tsc_RB13 (13) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
tsc_DL_DTCH4 (10) |
||
|
RLC mode |
TM |
TM |
TM |
TM |
||
|
MAC priority |
1 |
1 |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
DCH |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
tsc_DL_DCH3 (8) |
tsc_DL_DCH4 (9) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
||||
|
PhyCH identity |
tsc_DL_DPCH1 (20) |
tsc_S_CCPCH1 (5) |
||||
8.3.17 Configuration of Cell_DCH_MAC_SRB
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.1. 3. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1; except that RB3 is mapped on TM mode.
The configuration is applied to the MAC tests.
Table 8.3.17.1: Uplink configuration of Cell_DCH_MAC_SRB
|
RB Identity |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB_DCCH_DCH_MAC (-15) |
tsc_RB4 (4) |
tsc_RB0 (0) |
|
|
LogCh Type |
DCCH |
DCCH |
DCCH |
DCCH |
CCCH |
|
|
LogCh Identity |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
tsc_UL_CCCH5 (5) |
|
|
RLC mode |
UM |
AM |
TM |
AM |
TM |
AM |
|
TrCH Type |
DCH |
RACH |
||||
|
TrCH identity |
tsc_UL_DCH5 (5) |
tsc_RACH1 (15) |
||||
|
PhyCh Type |
DPDCH |
PRACH |
||||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
||||
Table 8.3.17.2: Downlink configuration of Cell_DCH_MAC_SRB
|
RB Identity |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB_DCCH_DCH_MAC (-15) |
tsc_RB4 (4) |
tsc_RB0 (0) |
tsc_RB_PCCH (-2) |
|
|
LogCh Type |
DCCH |
DCCH |
DCCH |
DCCH |
CCCH |
PCCH |
|
|
LogCh Identity |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_DL_CCCH5 (5) |
tsc_PCCH1 (1) |
|
|
RLC mode |
UM |
AM |
TM |
AM |
UM |
TM |
AM |
|
MAC priority |
1 |
2 |
3 |
4 |
1 |
1 |
1 |
|
TrCH Type |
DCH |
FACH |
PCH |
FACH |
|||
|
TrCH identity |
tsc_DL_DCH5 (10) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
tsc_FACH2 (14) |
|||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|||||
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|||||
8.3.18 Configuration of Cell_FACH_MAC_SRB
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink; except that RB3 is mapped on TM mode.
The configuration is applied to the MAC tests.
Table 8.3.18.1: Uplink configuration of Cell_FACH_MAC_SRB
|
RB Identity |
tsc_RB20 (20) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB_DCCH_FACH_MAC (-14) |
tsc_RB4 (4) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
LogCh Identity |
Tsc_UL_DTCH1 (7) |
tsc_UL_CCCH5 (5) |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
|
RLC mode |
AM |
TM |
UM |
AM |
TM |
AM |
|
TrCH Type |
RACH |
|||||
|
TrCH identity |
tsc_RACH1 (15) |
|||||
|
PhyCh Type |
PRACH |
|||||
|
PhyCH identity |
tsc_PRACH1 (8) |
|||||
Table 8.3.18.2: Downlink configuration of Cell_FACH_MAC_SRB
|
RB Identity |
tsc_RB20 (20) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB_DCCH_FACH_MAC (-14) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
PCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (6) |
tsc_DL_CCCH5 (5) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
tsc_PCCH1 (1) |
|
RLC mode |
AM |
UM |
UM |
AM |
TM |
AM |
TM |
TM |
|
MAC priority |
1 |
1 |
2 |
3 |
4 |
5 |
6 |
1 |
|
TrCH Type |
FACH |
FACH |
PCH |
|||||
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
|||||
|
PhyCh Type |
Secondary CCPCH |
|||||||
|
PhyCH identity |
tsc_S_CCPCH1 (5) |
|||||||
8.3.19 Configuration of Cell_FACH_MAC_SRB0
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink; except that the downlink SRB0 is mapped on TM mode.
The configuration is applied to the MAC tests.
The uplink configuration of Cell_FACH_MAC_SRB0 is the same as the uplink configuration of Cell_FACH.
Table 8.3.19: Downlink configuration of Cell_FACH_MAC_SRB0
|
RB Identity |
tsc_RB20 (20) |
tsc_RB_CCCH_FACH_MAC (-18) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
PCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (6) |
tsc_DL_CCCH5 (5) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
tsc_PCCH1 (1) |
|
RLC mode |
AM |
TM |
UM |
AM |
AM |
AM |
TM |
TM |
|
MAC priority |
1 |
1 |
2 |
3 |
4 |
5 |
6 |
1 |
|
TrCH Type |
FACH |
FACH |
PCH |
|||||
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
|||||
|
PhyCh Type |
Secondary CCPCH |
|||||||
|
PhyCH identity |
tsc_S_CCPCH1 (5) |
|||||||
8.3.20 Configuration of Cell_FACH_2SCCPCH_StandAlonePCH
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 for downlink and 3GPP TS 34.108 [3] except the mapping of PCH, clause 6.10.2.4.4.1.1.1 for uplink.
The configuration is applied to the RAB tests.
The uplink configuration of Cell_FACH_2SCCPCH_StandAlonePCH is the same as the uplink configuration of Cell_FACH.
Table 8.3.20: Downlink configuration of Cell_FACH_2SCCPCH_StandAlonePCH
|
RB Identity |
tsc_RB20 (20) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
PCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (6) |
tsc_DL_CCCH5 (5) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
tsc_PCCH1 (1) |
|
RLC mode |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
TM |
|
MAC priority |
1 |
1 |
2 |
3 |
4 |
5 |
6 |
1 |
|
TrCH Type |
FACH |
FACH |
PCH |
|||||
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
|||||
|
PhyCh Type |
Secondary CCPCH |
Secondary CCPCH |
||||||
|
PhyCH identity |
tsc_S_CCPCH2 (10) |
tsc_S_CCPCH1 (5) |
||||||
8.3.21 Configuration of PS Cell_DCH_2AM_PS
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.1.26 and 6.10.2.4.1.57. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 with 2 AM RAB and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to MAC and RAB test cases.
Table 8.3.21.1: Uplink configuration of Cell_DCH_2AM_PS
|
RB Identity |
tsc_RB20 (20) |
tsc_RB22 (22) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
||
|
RLC mode |
AM |
AM |
||
|
TrCH Type |
DCH |
|||
|
TrCH identity |
tsc_UL_DCH1 (1) |
|||
|
PhyCh Type |
DPDCH |
PRACH |
||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
||
Table 8.3.21.2: Downlink configuration of Cell_DCH_2AM_PS
|
RB Identity |
tsc_RB20 (20) |
tsc_RB22 (22) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
||
|
RLC mode |
AM |
AM |
||
|
MAC priority |
1 |
1 |
||
|
TrCH Type |
DCH |
|||
|
TrCH identity |
tsc_DL_DCH1 (6) |
|||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
||
8.3.21a Configuration of Cell_DCH_3AM_PS
The configuration is based on 3GPP TS 34.108 [3], clauses 6.11.5.4.1.70. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to LCR TDD RB tests.
Table 8.3.21a.1: Uplink configuration of Cell_DCH_3AM_PS
|
RB Identity |
tsc_RB20 (20) |
tsc_RB22 (22) |
tsc_RB24 (24) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
tsc_UL_DTCH3 (9) |
||
|
RLC mode |
AM |
AM |
AM |
||
|
TrCH Type |
DCH |
||||
|
TrCH identity |
tsc_UL_DCH1 (1) |
||||
|
PhyCh Type |
DPDCH |
PRACH |
|||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|||
Table 8.3.21a.2: Downlink configuration of Cell_DCH_3AM_PS
|
RB Identity |
tsc_RB20 (20) |
tsc_RB22 (22) |
tsc_RB24 (24) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
||
|
RLC mode |
AM |
AM |
AM |
||
|
MAC priority |
1 |
1 |
1 |
||
|
TrCH Type |
DCH |
||||
|
TrCH identity |
tsc_DL_DCH1 (6) |
||||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|||
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|||
8.3.22 Configuration of PS Cell_DCH_2_PS_Call
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.1.56 and 6.10.2.4.1.58. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to RB tests.
Table 8.3.22.1: Uplink configuration of Cell_DCH_2_PS_Call
|
RB Identity |
tsc_RB20 (20) |
tsc_RB22 (22) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
||
|
RLC mode |
AM |
AM |
||
|
TrCH Type |
DCH |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
tsc_UL_DCH2 (2) |
||
|
PhyCh Type |
DPDCH |
PRACH |
||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
||
Table 8.3.22.2: Downlink configuration of Cell_DCH_2_PS_Call
|
RB Identity |
tsc_RB20 (20) |
tsc_RB22 (22) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
||
|
RLC mode |
AM |
AM |
||
|
MAC priority |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2(7) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
||
8.3.23 Configuration of Cell_FACH_3_SCCPCH_4_FACH_Cnfg1
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RAB tests.
The uplink configuration of Cell_FACH_3_SCCPCH_4_FACH Cnfg1 is the same as the uplink configuration of Cell_FACH.
Table 8.3.23.1: Downlink configuration of Cell_FACH_3_SCCPCH_4_FACH_Cnfg1:
1st & 2nd S-CCPCH
|
RB Identity |
tsc_RB0 (0) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
|
|
LogCh Type |
CCCH |
BCCH |
PCCH |
|
|
LogCh Identity |
tsc_DL_CCCH5 (5) |
tsc_BCCH6 (6) |
tsc_PCCH1 (1) |
|
|
RLC mode |
UM |
TM |
TM |
|
|
MAC priority |
1 |
6 |
1 |
|
|
TrCH Type |
FACH |
FACH |
PCH |
|
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
|
|
PhyCh Type |
Secondary CCPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_S_CCPCH2 (10) |
tsc_S_CCPCH1 (5) |
||
Table 8.3.23.2: Downlink configuration of Cell_FACH_3_SCCPCH_4_FACH_Cnfg1: 3rd S-CCPCH
|
RB Identity |
tsc_RB20 (20) |
tsc_RB29 (29) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH_RAB (-19) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_CCCH6 (6) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH7 (7) |
|
RLC mode |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
|
MAC priority |
1 |
1 |
2 |
3 |
4 |
5 |
6 |
|
TrCH Type |
FACH |
FACH |
|||||
|
TrCH identity |
tsc_FACH4 (17) |
tsc_FACH3 (16) |
|||||
|
PhyCh Type |
Secondary CCPCH |
||||||
|
PhyCH identity |
tsc_S_CCPCH3 (13) |
||||||
8.3.24 Configuration of Cell_FACH_3_SCCPCH_4_FACH_Cnfg2
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RAB tests.
The uplink configuration of Cell_FACH_3_SCCPCH_4_FACH Cnfg2 is the same as the uplink configuration of Cell_FACH.
Table 8.3.24.1: Downlink configuration of Cell_FACH_3_SCCPCH_4_FACH_Cnfg2: 2nd S-CCPCH
|
RB Identity |
tsc_RB20 (20) |
tsc_RB29 (29) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH_RAB (-19) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_CCCH6 (6) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH7 (7) |
|
RLC mode |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
|
MAC priority |
1 |
1 |
2 |
3 |
4 |
5 |
6 |
|
TrCH Type |
FACH |
FACH |
|||||
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
|||||
|
PhyCh Type |
Secondary CCPCH |
||||||
|
PhyCH identity |
tsc_S_CCPCH2 (10) |
||||||
Table 8.3.24.2: Downlink configuration of Cell_FACH_3_SCCPCH_4_FACH_Cnfg2:
1st & 3rd S-CCPCH
|
RB Identity |
tsc_RB0 (0) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
|
|
LogCh Type |
CCCH |
BCCH |
PCCH |
|
|
LogCh Identity |
tsc_DL_CCCH5 (5) |
tsc_BCCH6 (6) |
tsc_PCCH1 (1) |
|
|
RLC mode |
UM |
TM |
TM |
|
|
MAC priority |
1 |
6 |
1 |
|
|
TrCH Type |
FACH |
FACH |
PCH |
|
|
TrCH identity |
tsc_FACH4 (17) |
tsc_FACH3 (16) |
tsc_PCH1 (12) |
|
|
PhyCh Type |
Secondary CCPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_S_CCPCH3 (13) |
tsc_S_CCPCH1 (5) |
||
8.3.25 Configuration of Cell_FACH_3_SCCPCH_3_FACH_CTCH
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RAB tests.
The uplink configuration of Cell_FACH_3_SCCPCH_3_FACH_CTCH is the same as the uplink configuration of Cell_FACH.
Table 8.3.25.1: Downlink configuration of Cell_FACH_3_SCCPCH_3_FACH_CTCH:
1st & 2nd S-CCPCH
|
RB Identity |
tsc_RB30 (30) |
tsc_RB0 (0) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
|
LogCh Type |
CTCH |
CCCH |
BCCH |
PCCH |
|
LogCh Identity |
tsc_CTCH1 (11) |
tsc_DL_CCCH5 (5) |
tsc_BCCH6 (6) |
tsc_PCCH1 (1) |
|
RLC mode |
UM |
UM |
TM |
TM |
|
MAC priority |
7 |
1 |
6 |
1 |
|
TrCH Type |
FACH |
FACH |
PCH |
|
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
|
|
PhyCh Type |
Secondary CCPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_S_CCPCH2 (10) |
tsc_S_CCPCH1 (5) |
||
Table 8.3.25.2: Downlink configuration of Cell_FACH_3_SCCPCH_3_FACH_CTCH: 3rd S-CCPCH
|
RB Identity |
tsc_RB20 (20) |
tsc_RB29 (29) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH_RAB (-19) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_CCCH6 (6) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (5) |
tsc_BCCH7 (7) |
|
RLC mode |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
|
MAC priority |
1 |
1 |
2 |
3 |
4 |
5 |
6 |
|
TrCH Type |
FACH |
FACH |
|||||
|
TrCH identity |
tsc_FACH4 (17) |
tsc_FACH3 (16) |
|||||
|
PhyCh Type |
Secondary CCPCH |
||||||
|
PhyCH identity |
tsc_S_CCPCH3 (13) |
||||||
8.3.26 Configuration of PS Cell_DCH_DSCH_PS_RAB
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.2.1. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to those RAB signalling tests where a PS RAB on DTCH is setup for the interactive or background service class is mapped on to DSCH.
The uplink configuration is same in clause 8.3.8.
Table 8.3.26: Downlink configuration of PS Cell_DCH_DSCH_PS_RAB
|
RB Identity |
tsc_RB20 (20) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
AM |
||
|
MAC priority |
1 |
||
|
TrCH Type |
DSCH |
||
|
TrCH identity |
tsc_DSCH1 (19) |
||
|
PhyCh Type |
PDSCH |
DPCH |
Secondary CCPCH |
|
PhyCH identity |
tsc_DL_PDSCH1 (16) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
8.3.27 Configuration of Cell_DCH_DSCH_CS_PS
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.2.4. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to RB tests.
The Uplink configuration is similar to clause 8.3.14.
Table 8.3.27: Downlink configuration of Cell_DCH_DSCH_CS_PS
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
tsc_RB20 (20) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
tsc_DL_DTCH4 (10) |
||
|
RLC mode |
TM |
TM |
TM |
AM |
||
|
MAC priority |
1 |
1 |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
DCH |
DSCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
Tsc_DL_DCH3 (8) |
tsc_DL_DSCH1 (19) |
||
|
PhyCh Type |
DPCH |
PDSCH |
DPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_DL_DPCH1 (20) |
tsc_DL_PDSCH1 (16) |
tsc_DL_DPCH1 (20) |
tsc_S_CCPCH1 (5) |
||
8.3.28 Configuration of Cell_FACH_2SCCPCH_StandAlonePCH_2a
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2a for downlink and 3GPP TS 34.108 [3] except the mapping of PCH, clause 6.10.2.4.4.2 for uplink. The configuration is applied to the RAB tests.
Table 8.3.28.1: Uplink configuration of Configuration of Configuration of Cell_FACH_2SCCPCH_StandAlonePCH_2a
|
RB Identity |
tsc_RB24 (24) |
tsc_RB20 (20) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
|
LogCh Type |
DTCH |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
LogCh Identity |
tsc_UL_DTCH4 (10) |
tsc_UL_DTCH1 (7) |
tsc_UL_CCCH5 (5) |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
|
RLC mode |
AM |
AM |
TM |
UM |
AM |
AM |
AM |
|
TrCH Type |
RACH |
||||||
|
TrCH identity |
tsc_RACH1 (15) |
||||||
|
PhyCh Type |
PRACH |
||||||
|
PhyCH identity |
tsc_PRACH1 (8) |
||||||
Table 8.3.28.2: Downlink configuration of Cell_FACH_2SCCPCH_StandAlonePCH_2a
|
RB Identity |
tsc_RB20 (20) |
tsc_RB24 (24) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_2ndPCCH (‑4) |
|
LogCh Type |
DTCH |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
PCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH4 (10) |
tsc_DL_CCCH5 (5) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
tsc_PCCH1 (1) |
|
RLC mode |
AM |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
TM |
|
MAC priority |
1 |
1 |
1 |
2 |
3 |
4 |
5 |
6 |
1 |
|
TrCH Type |
FACH |
FACH |
FACH |
PCH |
|||||
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1(13) |
tsc_PCH1 (12) |
||||||
|
PhyCh Type |
Secondary CCPCH |
Secondary CCPCH |
|||||||
|
PhyCH identity |
tsc_S_CCPCH2 (10) |
tsc_S_CCPCH1 (5) |
|||||||
8.3.29 Configuration of Cell_FACH_3_SCCPCH_4_FACH_2a_Cnfg1
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2a for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.2 for uplink. The configuration is applied to the RAB tests.
The uplink configuration of Cell_FACH_3_SCCPCH_4_FACH Cnfg1 is the same as the uplink configuration of Cell_FACH_2_SCCPCH_StandAlonePCH_2a.
Table 8.3.29.1: Downlink configuration of Cell_FACH_3_SCCPCH_4_FACH_2a_Cnfg1:
1st & 2nd S-CCPCH
|
RB Identity |
tsc_RB0 (0) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
|||
|
LogCh Type |
CCCH |
BCCH |
PCCH |
|||
|
LogCh Identity |
tsc_DL_CCCH5 (5) |
tsc_BCCH6 (6) |
tsc_PCCH1 (1) |
|||
|
RLC mode |
UM |
TM |
TM |
|||
|
MAC priority |
1 |
6 |
1 |
|||
|
TrCH Type |
FACH |
FACH |
FACH |
PCH |
||
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
|||
|
PhyCh Type |
Secondary CCPCH |
Secondary CCPCH |
||||
|
PhyCH identity |
tsc_S_CCPCH2 (10) |
tsc_S_CCPCH1 (5) |
||||
Table 8.3.29.2: Downlink configuration of Cell_FACH_3_SCCPCH_4_FACH_2a_Cnfg1:
3rd S-CCPCH
|
RB Identity |
tsc_RB24 (24) |
tsc_RB20 (20) |
tsc_RB29 (29) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH_RAB (-19) |
|
LogCh Type |
DTCH |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
|
LogCh Identity |
tsc_DL_DTCH4 (10) |
tsc_DL_DTCH1 (7) |
tsc_DL_CCCH6 (6) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH7 (7) |
|
RLC mode |
AM |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
|
MAC priority |
1 |
1 |
1 |
2 |
3 |
4 |
5 |
6 |
|
TrCH Type |
FACH |
FACH |
||||||
|
TrCH identity |
tsc_FACH4 (17) |
tsc_FACH3 (16) |
||||||
|
PhyCh Type |
Secondary CCPCH tsc_S_CCPCH3 (13) |
|||||||
|
PhyCH identity |
||||||||
8.3.30 Configuration of Cell_FACH_3_SCCPCH_4_FACH_2a_Cnfg2
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2a for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.2 for uplink. The configuration is applied to the RAB tests.
The uplink configuration of Cell_FACH_3_SCCPCH_4_FACH Cnfg2 is the same as the uplink configuration of Cell_FACH_2_SCCPCH_StandAlonePCH_2a.
Table 8.3.30.1: Downlink configuration of Cell_FACH_3_SCCPCH_4_FACH_2a_Cnfg2: 2nd S-CCPCH
|
RB Identity |
tsc_RB21 (24) |
tsc_RB20 (20) |
tsc_RB29 (29) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH_RAB (-19) |
|
LogCh Type |
DTCH |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
|
LogCh Identity |
tsc_DL_DTCH2 (10) |
tsc_DL_DTCH1 (7) |
tsc_DL_CCCH6 (6) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH7 (7) |
|
RLC mode |
AM |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
|
MAC priority |
1 |
1 |
1 |
2 |
3 |
4 |
5 |
6 |
|
TrCH Type |
FACH |
FACH |
FACH |
|||||
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
||||||
|
PhyCh Type |
Secondary CCPCH |
|||||||
|
PhyCH identity |
tsc_S_CCPCH2 (10) |
|||||||
Table 8.3.30.2 Downlink configuration of Cell_FACH_3_SCCPCH_4_FACH_2a_Cnfg2:
1st & 3rd S-CCPCH
|
RB Identity |
tsc_RB0 (0) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
||
|
LogCh Type |
CCCH |
BCCH |
PCCH |
||
|
LogCh Identity |
tsc_DL_CCCH5 (5) |
tsc_BCCH6 (6) |
tsc_PCCH1 (1) |
||
|
RLC mode |
UM |
TM |
TM |
||
|
MAC priority |
1 |
6 |
1 |
||
|
TrCH Type |
FACH |
FACH |
FACH |
PCH |
|
|
TrCH identity |
tsc_FACH4 (17) |
tsc_FACH3 (16) |
tsc_PCH1 (12) |
||
|
PhyCh Type |
Secondary CCPCH |
Secondary CCPCH |
|||
|
PhyCH identity |
tsc_S_CCPCH3 (13) |
tsc_S_CCPCH1 (5) |
|||
8.3.31 Configuration of Cell_FACH_3_SCCPCH_3_FACH_CTCH_2a
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.2 for uplink. The configuration is applied to the RAB tests.
The uplink configuration of Cell_FACH_3_SCCPCH_3_FACH_CTCH_2a is the same as the uplink configuration of Cell_FACH Cell_FACH_3_SCCPCH_4_FACH Cnfg1.
Table 8.3.31.1: Downlink configuration of Cell_FACH_3_SCCPCH_3_FACH_CTCH_2a:
1st & 2nd S-CCPCH
|
RB Identity |
tsc_RB30 (30) |
tsc_RB0 (0) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
|
LogCh Type |
CTCH |
CCCH |
BCCH |
PCCH |
|
LogCh Identity |
tsc_CTCH1 (11) |
tsc_DL_CCCH5 (5) |
tsc_BCCH6 (6) |
tsc_PCCH1 (1) |
|
RLC mode |
UM |
UM |
TM |
TM |
|
MAC priority |
7 |
1 |
6 |
1 |
|
TrCH Type |
FACH |
FACH |
PCH |
|
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
|
|
PhyCh Type |
Secondary CCPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_S_CCPCH2 (10) |
tsc_S_CCPCH1 (5) |
||
Table 8.3.31.2 Downlink configuration of Cell_FACH_3_SCCPCH_3_FACH_CTCH_2a: 3rd S-CCPCH
|
RB Identity |
tsc_RB24 (24) |
tsc_RB20 (20) |
tsc_RB29 (29) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH_RAB (-19) |
|
LogCh Type |
DTCH |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
|
LogCh Identity |
tsc_DL_DTCH4(10) |
tsc_DL_DTCH1 (7) |
tsc_DL_CCCH6 (6) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (5) |
tsc_BCCH7 (7) |
|
RLC mode |
AM |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
|
MAC priority |
1 |
1 |
1 |
2 |
3 |
4 |
5 |
6 |
|
TrCH Type |
FACH |
FACH |
FACH |
|||||
|
TrCH identity |
tsc_FACH4 (17) |
tsc_FACH3 (16) |
||||||
|
PhyCh Type |
Secondary CCPCH |
|||||||
|
PhyCH identity |
tsc_S_CCPCH3 (13) |
|||||||
8.3.32 Configuration of Cell_DCH_HS_DSCH (Rel-5 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.5.1 or 6.10.2.4.5.2. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to those RRC and NAS signalling tests in the DCH state where a PS RAB on DTCH mapped on HS-DSCH is setup for the interactive or background service class.
Table 8.3.32.1: Uplink configuration of Cell_DCH_HS_DSCH
|
RB Identity |
tsc_RB25 (25) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
AM |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
||
|
PhyCh Type |
DPDCH |
PRACH |
|
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|
Table 8.3.32.2: Downlink configuration of Cell_DCH_HS_DSCH
|
RB Identity |
tsc_RB25 (25) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
AM |
||
|
MAC priority |
8 |
||
|
TrCH Type |
HS-DSCH |
||
|
TrCH identity /QueueID |
0 |
||
|
PhyCh Type |
PDSCH |
DPCH |
Secondary CCPCH |
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
8.3.32a Configuration of Cell_DCH_E_DPCH_PS
The configuration is based on 3GPP TS 34.108 [3], clauses 6.11.5.4.7.8. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to LCR TDD RB tests.
Table 8.3.32a.1: Uplink configuration of Cell_DCH_E_DPCH_PS
|
RB Identity |
tsc_RB25 (25) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
AM |
||
|
TrCH Type |
E-DCH |
||
|
TrCH identity/Mac-d Flow Id |
2 |
||
|
PhyCh Type |
E-DPDCH |
DPDCH |
PRACH |
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
Table 8.3.32a.2: Downlink configuration of PS Cell_DCH_E_DPCH_PS
|
RB Identity |
tsc_RB25 (25) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
AM |
||
|
MAC priority |
1 |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|
8.3.33 Configuration of cell_One_DTCH_HS_DSCH_MAC (Rel-5 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.5.1. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to those MAC-hs/MAC-ehs[Rel-7 or later] Signalling tests in the DCH state where a PS RAB on DTCH mapped on HS-DSCH is setup for the interactive or background service class.
Table 8.3.33.1: Uplink configuration of cell_One_DTCH_HS_DSCH_MAC
|
RB Identity |
tsc_RB_MAC_HS (-25) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
||
|
PhyCh Type |
DPDCH |
PRACH |
|
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|
Table 8.3.33.2: Downlink configuration of Cell_DCH_HS_DSCH
|
RB Identity |
tsc_RB_MAC_HS (-25) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
MAC priority |
8 |
||
|
TrCH Type |
HS-DSCH |
||
|
TrCH identity /QueueID |
0 |
||
|
PhyCh Type |
PDSCH |
DPCH |
Secondary CCPCH |
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
8.3.33a Configuration of cell_Three_DTCH_1Q_HS_DSCH_MAC (Rel-7 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.11.4f. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to those MAC-ehs Signalling tests in the DCH state where a 3 PS RAB on DTCH mapped on HS-DSCH [1 MAC-ehs Queue] is setup for the interactive or background service class.
Table 8.3.33a.1: Uplink configuration of cell_Three_DTCH_1Q_HS_DSCH_MAC
|
RB Identity |
tsc_RB_MAC_HS (-25) |
tsc_RB_MAC_ehs_26 (-26) |
tsc_RB_MAC_ehs_27 (-27) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
|
LogCh Type |
DTCH |
DTCH |
DTCH |
|||
|
LogCh Identity |
Tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
tsc_UL_DTCH3 (9) |
|||
|
RLC mode |
TM |
TM |
TM |
|||
|
TrCH Type |
DCH |
|||||
|
TrCH identity |
tsc_UL_DCH1 (1) |
|||||
|
PhyCh Type |
DPDCH |
PRACH |
||||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
||||
Table 8.3.33a.2: Downlink configuration of cell_Three_DTCH_1Q_HS_DSCH_MAC
|
RB Identity |
tsc_RB_MAC_HS (-25) |
tsc_RB_MAC_ehs_26 (-26) |
tsc_RB_MAC_ehs_27 (-27) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
||
|
RLC mode |
TM |
TM |
TM |
||
|
MAC priority |
8 |
8 |
8 |
||
|
TrCH Type |
HS-DSCH |
||||
|
TrCH identity /QueueID |
0 |
||||
|
PhyCh Type |
PDSCH |
DPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
||
8.3.33b Configuration of cell_Three_DTCH_3Q_HS_DSCH_MAC (Rel-7 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.11.4f. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to those MAC-ehs Signalling tests in the DCH state where a 3 PS RAB on DTCH mapped on HS-DSCH [1 MAC-ehs Queue] is setup for the interactive or background service class.
The uplink configuration of cell_Three_DTCH_3Q_HS_DSCH_MAC is the same as the uplink configuration of cell_Three_DTCH_1Q_HS_DSCH_MAC
Table 8.3.33b: Downlink configuration of cell_Three_DTCH_3Q_HS_DSCH_MAC
|
RB Identity |
Tsc_RB_MAC_HS (-25) |
tsc_RB_MAC_ehs_26 (-26) |
tsc_RB_MAC_ehs_27 (-27) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
||
|
RLC mode |
TM |
TM |
TM |
||
|
MAC priority |
8 |
8 |
8 |
||
|
TrCH Type |
HS-DSCH |
HS-DSCH |
HS-DSCH |
||
|
TrCH identity /QueueID |
0 |
1 |
2 |
||
|
PhyCh Type |
PDSCH |
DPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
||
8.3.33c Configuration of Cell_E_HS_SRB_MAC_TM_RAB (Rel-7 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.6.3, with RAB configured in TM mode on SS side. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to RRC signalling tests in the DCH state where a PS RAB is setup for the interactive or background service class (A14):
– PS RAB on DTCH is mapped on E-DCH in uplink and HS-DSCH in downlink.
– Uplink SRBs on DCCH are mapped on E-DCH.
– Downlink SRBs on DCCH are mapped on HS-DSCH.
Table 8.3.33c.1: Uplink configuration of Cell_E_HS_SRB_MAC_TM_RAB
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
TrCH Type |
E-DCH |
||
|
TrCH identity/ Mac-d Flow Id |
2 |
1 |
|
|
PhyCh Type |
E-DPDCH |
PRACH |
|
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_PRACH1 (8) |
|
Table 8.3.33c.2: Downlink configuration of Cell_E_HS_SRB_MAC_TM_RAB
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
|
LogCh Type |
DTCH |
|||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
|||
|
RLC mode |
TM |
|||
|
MAC priority |
8 |
|||
|
TrCH Type |
HS-DSCH |
|||
|
TrCH identity / Mac-d Flow Id |
0 |
1 |
||
|
PhyCh Type |
PDSCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_S_CCPCH1 (5) |
||
8.3.34 Configuration of Cell_2UM_3AM_DCH_HS_DSCH (Rel-5 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.11.4a The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to MAC test case 7.1.5.2.
Table 8.3.34.1: Uplink configuration of Cell_2UM_3AM_DCH_HS_DSCH
|
RB Identity |
tsc_RB26 (26) |
tsc_RB27 (27) |
tsc_RB25 (25) |
tsc_RB28 (28) |
tsc_RB17 (17) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
tsc_UL_DTCH3 (9) |
tsc_UL_DTCH4 (10) |
tsc_UL_DTCH5 (13) |
||
|
RLC mode |
UM |
UM |
AM |
AM |
AM |
||
|
TrCH Type |
DCH |
||||||
|
TrCH identity |
tsc_UL_DCH1 (1) |
||||||
|
PhyCh Type |
DPDCH |
PRACH |
|||||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|||||
Table 8.3.34.2: Downlink configuration of Cell_2UM_3AM_DCH_HS_DSCH
|
RB Identity |
tsc_RB26 (26) |
tsc_RB27 (27) |
tsc_RB25 (25) |
tsc_RB28 (28) |
tsc_RB17 () |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
tsc_DL_DTCH4 (10) |
tsc_DL_DTCH5 (11) |
||
|
RLC mode |
UM |
UM |
AM |
AM |
AM |
||
|
MAC priority |
8 |
8 |
8 |
8 |
8 |
||
|
TrCH Type |
HS-DSCH |
||||||
|
TrCH identity /QueueID |
0 |
1 |
2 |
||||
|
PhyCh Type |
PDSCH |
DPCH |
Secondary CCPCH |
||||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
||||
8.3.35 Configuration of Cell_DCH_Speech_WAMR (Rel-5 or later)
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.1.62. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108[3], clause 6.10.2.4.4.1.1.1. The configuration is applied to RAB test 14.2.62.
Table 8.3.35.1: Uplink configuration of Cell_DCH_Speech_WAMR
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
||
|
RLC mode |
TM |
TM |
||
|
TrCH Type |
DCH |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
tsc_UL_DCH2 (2) |
||
|
PhyCh Type |
DPDCH |
PRACH |
||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
||
Table 8.3.35.2: Downlink configuration of Cell_DCH_Speech_WAMR
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB5 (5) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DCCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DCCH5 (5) |
||
|
RLC mode |
TM |
TM |
TM |
||
|
MAC priority |
1 |
1 |
5 |
||
|
TrCH Type |
DCH |
DCH |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
tsc_DL_DCH6 (22) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|||
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|||
8.3.36 Configuration of PS Cell_Four_DTCH_HS_CS and Cell_Four_DTCH_CS_HS (Rel-5 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.5.3 and 6.10.2.4.5.3a. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The uplink configuration is same in clause 8.3.14 except a HS-DPCCH shall be included in the UL_DPCH and tsc_RB25 shall be used instead of tsc_RB20.
Table 8.3.36: Downlink configuration of PS Cell_Four_DTCH_HS_CS and Cell_Four_DTCH_CS_HS
|
RB Identity |
tsc_RB25 (25) |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH4 (10) |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
||
|
RLC mode |
AM |
TM |
TM |
TM |
||
|
MAC priority |
8 |
1 |
1 |
1 |
||
|
TrCH Type |
HS_DSCH |
DCH |
DCH |
DCH |
||
|
TrCH identity |
N/A |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
tsc_DL_DCH3 (8) |
||
|
PhyCh Type |
HS-PDSCH |
DPCH |
Secondary CCPCH |
|||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|||
8.3.37 Configuration of PS Cell_Two_DTCH_HS_CS (Rel-5 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.5.4 and 6.10.2.4.5.4a. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The uplink configuration is same in clause 8.3.15 except a HS-DPCCH shall be included in the UL_DPCH and tsc_RB25 shall be used instead of tsc_RB20.
Table 8.3.37: Downlink configuration of PS Cell_Two_DTCH_HS_CS
|
RB Identity |
tsc_RB25 (25) |
tsc_RB10 (10) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH4 (10) |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
AM |
TM |
||
|
MAC priority |
8 |
1 |
||
|
TrCH Type |
HS_DSCH |
DCH |
||
|
TrCH identity |
N/A |
tsc_DL_DCH1 (6) |
||
|
PhyCh Type |
HS-PDSCH |
DPCH |
Secondary CCPCH |
|
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (20) |
tsc_S_CCPCH1 (5) |
|
8.3.38 Configuration of PS Cell_DCH_64kPS_RAB_SRB_HS (Rel-5 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.1.26. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
Table 8.3.38.1: Uplink configuration of PS Cell_DCH_64kPS_RAB_SRB_HS
|
RB Identity |
tsc_RB25 (25) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
AM |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
||
|
PhyCh Type |
DPDCH |
PRACH |
|
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|
Table 8.3.38.2: Downlink configuration of PS Cell_DCH_64kPS_RAB_SRB SRB
|
RB Identity |
tsc_RB25 (25) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
AM |
||
|
MAC priority |
8 |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|
8.3.39 Configuration of PS Cell_DCH_2AM_HS_DSCH (Rel-5 or later)
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.1.26 and 6.10.2.4.1.57. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 with 2 AM RAB and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to MAC and RAB test cases.
Table 8.3.39.1: Uplink configuration of Cell_DCH_2AM_HS_DSCH
|
RB Identity |
tsc_RB25 (25) |
tsc_RB17 (17) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
||
|
RLC mode |
AM |
AM |
||
|
TrCH Type |
DCH |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
tsc_UL_DCH2 (2) |
||
|
PhyCh Type |
DPDCH |
PRACH |
||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
||
Table 8.3.39.2: Downlink configuration of Cell_DCH_2AM_HS_DSCH
|
RB Identity |
tsc_RB25 (25) |
tsc_RB17 (17) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
||
|
RLC mode |
AM |
AM |
||
|
MAC priority |
8 |
8 |
||
|
TrCH Type |
HS-DSCH |
HS-DSCH |
||
|
TrCH identity /QueueID |
0 |
1 |
||
|
PhyCh Type |
PDSCH |
DPCH |
Secondary CCPCH |
|
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|
8.3.39a Configuration of Cell_DCH_2AM_E_DPCH
The configuration is based on 3GPP TS 34.108 [3], clauses 6.11.5.4.7.12. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to LCR TDD RB tests.
Table 8.3.39a.1: Uplink configuration of Cell_DCH_2AM_E_DPCH
|
RB Identity |
tsc_RB25 (25) |
tsc_RB17 (17) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
||
|
RLC mode |
AM |
AM |
||
|
TrCH Type |
E-DCH |
|||
|
TrCH identity/Mac-d Flow Id |
2 |
3 |
||
|
PhyCh Type |
E-DPDCH |
DPDCH |
PRACH |
|
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|
Table 8.3.39a.2: Downlink configuration of PS Cell_DCH_2AM_E_DPCH
|
RB Identity |
tsc_RB25 (25) |
tsc_RB17 (17) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
||
|
RLC mode |
AM |
AM |
||
|
MAC priority |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
||
8.3.40 Configuration of Cell_Three_DTCH_5SRB (Rel-5 or later)
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.1.62. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to RB tests.
The uplink configuration is same in clause 8.3.3 Cell_DCH_Speech.
Table 8.3.40: Downlink configuration of Cell_Three_DTCH_5SRB
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB5 (5) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_DL_DCCH5 () |
|
|
RLC mode |
TM |
TM |
TM |
UM |
AM |
AM |
AM |
TM |
|
|
MAC priority |
1 |
1 |
1 |
1 |
2 |
3 |
4 |
5 |
|
|
TrCH Type |
DCH |
DCH |
DCH |
DCH |
DCH |
||||
|
TrCH/ Q- identity |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
tsc_DL_DCH3 (8) |
tsc_DL_DCH5 (10) |
tsc_DL_DCH6 (22) |
||||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|||||||
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|||||||
8.3.41 Configuration of Cell_Five_DTCH_CS_HS (Rel-5 or later)
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.5.7. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to RB tests.
Table 8.3.41.1: Uplink configuration of Cell_Five_DTCH_CS_HS and Cell_Five_DTCH_CS_HS
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
tsc_RB25 (25) |
tsc_RB17 (17) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH except TrCH Identity is tsc_UL_DCH6 (21) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
tsc_UL_DTCH3 (9) |
tsc_UL_DTCH4 (10) |
tsc_UL_DTCH5 (13) |
||
|
RLC mode |
TM |
TM |
TM |
AM |
AM |
||
|
MAC priority |
1 |
1 |
1 |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
DCH |
DCH |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
tsc_UL_DCH2 (2) |
tsc_UL_DCH3 (3) |
tsc_UL_DCH4 (4) |
tsc_UL_DCH5 (5) |
||
|
PhyCh Type |
DPDCH |
PRACH |
|||||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|||||
Table 8.3.41.2: Downlink configuration of PS Cell_Five_DTCH_HS_CS and Cell_Five_DTCH_CS_HS
|
RB Identity |
tsc_RB25 (25) |
tsc_RB17 (17) |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH4 (10) |
tsc_DL_DTCH5 (11) |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
||
|
RLC mode |
AM |
AM |
TM |
TM |
TM |
||
|
MAC priority |
8 |
8 |
1 |
1 |
1 |
||
|
TrCH Type |
HS_DSCH |
HS_DSCH |
DCH |
DCH |
DCH |
||
|
TrCH identity |
N/A |
N/A |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
tsc_DL_DCH3 (8) |
||
|
PhyCh Type |
HS-PDSCH |
DPCH |
Secondary CCPCH |
||||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
||||
8.3.41a Configuration of Cell_FiveDTCH_E_DPCH
The configuration is based on 3GPP TS 34.108 [3], clauses 6.11.5.4.7.15. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to LCR TDD RB tests.
Table 8.3.41a.1: Uplink configuration of Cell_FiveDTCH_E_DPCH
|
RB Identity |
tsc_RB25 (25) |
tsc_RB17 (17) |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
DTCH |
|||
|
LogCh Identity |
tsc_UL_DTCH4 (10) |
tsc_UL_DTCH5 (13) |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
tsc_UL_DTCH3 (9) |
|||
|
RLC mode |
AM |
AM |
TM |
TM |
TM |
|||
|
TrCH Type |
E-DCH |
DCH |
DCH |
DCH |
||||
|
TrCH identity/Mac-d Flow Id |
2 |
3 |
tsc_UL_DCH1 (1) |
tsc_UL_DCH2 (2) |
tsc_UL_DCH3 (3) |
|||
|
PhyCh Type |
E-DPDCH |
DPDCH |
PRACH |
|||||
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|||||
Table 8.3.41a.2: Downlink configuration of PS Cell_FiveDTCH_E_DPCH
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
tsc_RB25 (25) |
tsc_RB17 (17) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
tsc_DL_DTCH4 (10) |
tsc_UL_DTCH5 (13) |
||
|
RLC mode |
TM |
TM |
TM |
AM |
AM |
||
|
MAC priority |
1 |
1 |
1 |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
DCH |
DCH |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
Tsc_DL_DCH3 (8) |
tsc_DL_DCH4 (9) |
tsc_DL_DCH5 (10) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|||||
|
PhyCH identity |
tsc_DL_DPCH1 (20) |
tsc_S_CCPCH1 (5) |
|||||
8.3.42 Configuration of Cell_DCH_E_HS (Rel-6 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.6.1. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to RRC signalling tests in the DCH state where a PS RAB on DTCH mapped on E-DCH in uplink and HS-DSCH in downlink is setup for the streaming or interactive or background service class (A12).
The downlink configuration is same in clause 8.3.32 Cell_DCH_HS_DSCH.
Table 8.3.42: Uplink configuration of Cell_DCH_E_HS
|
RB Identity |
tsc_RB25 (25) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
AM |
||
|
TrCH Type |
E-DCH |
||
|
TrCH identity/Mac-d Flow Id |
2 |
||
|
PhyCh Type |
E-DPDCH |
DPDCH |
PRACH |
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
8.3.43 Configuration of Cell_DCH_dlSRB_E_HS (Rel-6 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.6.2. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to RRC signalling tests in the DCH state where a PS RAB is setup for the interactive or background service class (A13):
– PS RAB on DTCH is mapped on E-DCH in uplink and HS-DSCH in downlink.
– Uplink SRBs on DCCH are mapped on E-DCH.
– Downlink SRBs on DCCH are mapped on DCH.
The downlink configuration is same in clause 8.3.32 Cell_DCH_HS_DSCH.
Table 8.3.43: Uplink configuration of Cell_DCH_dlSRB_E_HS
|
RB Identity |
tsc_RB25 (25) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
|
LogCh Type |
DTCH |
|||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
|||
|
RLC mode |
AM |
|||
|
TrCH Type |
E-DCH |
|||
|
TrCH identity/ Mac-d Flow Id |
2 |
1 |
||
|
PhyCh Type |
E-DPDCH |
PRACH |
||
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_PRACH1 (8) |
||
8.3.44 Configuration of Cell_E_HS (Rel-6 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.6.3. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to RRC signalling tests in the DCH state where a PS RAB is setup for the interactive or background service class (A14):
– PS RAB on DTCH is mapped on E-DCH in uplink and HS-DSCH in downlink.
– Uplink SRBs on DCCH are mapped on E-DCH.
– Downlink SRBs on DCCH are mapped on HS-DSCH.
The uplink configuration is same in clause 8.3.43 Cell_DCH_dlSRB_E_HS. In the downlink F-DPCH is configured.
Table 8.3.44: Downlink configuration of Cell_E_HS
|
RB Identity |
tsc_RB25 (25) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
|
LogCh Type |
DTCH |
|||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
|||
|
RLC mode |
AM |
|||
|
MAC priority |
8 |
|||
|
TrCH Type |
HS-DSCH |
|||
|
TrCH identity / Mac-d Flow Id |
0 |
1 |
||
|
PhyCh Type |
PDSCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_S_CCPCH1 (5) |
||
8.3.45 Configuration of PS Cell_Four_DTCH_E_HS_CS and Cell_Four_DTCH_CS_E_HS (Rel-6 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.6.4. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to RRC signalling tests in the DCH state where a PS RAB is setup for the interactive or background service class:
– PS RAB on DTCH is mapped on E-DCH in uplink and HS-DSCH in downlink.
– CS RAB on DTCH are mapped on DCH in uplink and downlink.
– Uplink SRBs on DCCH are mapped on DCH.
– Downlink SRBs on DCCH are mapped on DCH.
The downlink configuration is same as in clause 8.3.36 Cell_Four_DTCH_HS_CS and Cell_Four_DTCH_CS_HS.
Table 8.3.45: Uplink configuration of Cell_Four_DTCH_E_HS_CS and Cell_Four_DTCH_CS_E_HS
|
RB Identity |
tsc_RB25 (25) |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH4 (10) |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
tsc_UL_DTCH3 (9) |
||
|
RLC mode |
AM |
TM |
TM |
TM |
||
|
MAC priority |
1 |
1 |
1 |
|||
|
TrCH Type |
E-DCH |
DCH |
DCH |
DCH |
||
|
TrCH identity / Mac-d Flow Id |
2 |
tsc_UL_DCH1 (1) |
tsc_UL_DCH2 (2) |
tsc_UL_DCH3 (3) |
||
|
PhyCh Type |
E-DPDCH |
DPDCH |
PRACH |
|||
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|||
8.3.45a Configuration of Cell_FourDTCH_E_DPCH
The configuration is based on 3GPP TS 34.108 [3], clauses 6.11.5.4.7.13. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to LCR TDD RB tests.
Table 8.3.45a.1: Uplink configuration of Cell_FourDTCH_E_DPCH
|
RB Identity |
tsc_RB25 (25) |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH4 (10) |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
tsc_UL_DTCH3 (9) |
||
|
RLC mode |
AM |
TM |
TM |
TM |
||
|
TrCH Type |
E-DCH |
DCH |
DCH |
DCH |
||
|
TrCH identity/Mac-d Flow Id |
2 |
tsc_UL_DCH1 (1) |
tsc_UL_DCH2 (2) |
tsc_UL_DCH3 (3) |
||
|
PhyCh Type |
E-DPDCH |
DPDCH |
PRACH |
|||
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|||
Table 8.3.45a.2: Downlink configuration of PS Cell_FourDTCH_E_DPCH
|
RB Identity |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
tsc_RB25 (25) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
tsc_DL_DTCH4 (10) |
||
|
RLC mode |
TM |
TM |
TM |
AM |
||
|
MAC priority |
1 |
1 |
1 |
1 |
||
|
TrCH Type |
DCH |
DCH |
DCH |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
Tsc_DL_DCH3 (8) |
tsc_DL_DCH4 (9) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
||||
|
PhyCH identity |
tsc_DL_DPCH1 (20) |
tsc_S_CCPCH1 (5) |
||||
8.3.46 Configuration of Cell_2DCH_2AM_dlSRB_E_HS (Rel-6 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.5.2. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to RRC signalling tests in the DCH state where a PS RAB is setup for the interactive or background service class (A15):
– 2 AM PS RAB on DTCH is mapped on E-DCH in uplink and HS-DSCH in downlink.
– Uplink SRBs on DCCH are mapped on E-DCH.
– Downlink SRBs on DCCH are mapped on DCH.
The downlink configuration is same in clause 8.3.39 Cell_2DCH_2AM_HS_DSCH
Table 8.3.46: Uplink configuration of Cell_2DCH_2AM_dlSRB_E_HS
|
RB Identity |
tsc_RB25 (25) |
tsc_RB17 (17) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
||
|
RLC mode |
AM |
AM |
||
|
TrCH Type |
E-DCH |
|||
|
TrCH identity//Mac-d Flow Id |
2 |
3 |
1 |
|
|
PhyCh Type |
E-DPDCH |
PRACH |
||
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_PRACH1 (8) |
||
8.3.47 Configuration of Cell_E_HS_MAC_TM_RAB (Rel-6 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.11.4c, with RAB configured in TM mode on SS side. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to MAC(e/es) signalling tests in the DCH state where a PS RAB is setup for the interactive or background service class (A12):
– PS RAB on DTCH is mapped on E-DCH in uplink and HS-DSCH in downlink.
– Uplink SRBs on DCCH are mapped on DCH.
– Downlink SRBs on DCCH are mapped on DCH.
Table 8.3.47.1: Uplink configuration of Cell_E_HS_MAC_TM_RAB
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
TrCH Type |
E-DCH |
||
|
TrCH identity/Mac-d Flow Id |
2 |
||
|
PhyCh Type |
E-DPDCH |
DPDCH |
PRACH |
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
Table 8.3.47.2: Downlink configuration of Cell_E_HS_MAC_TM_RAB
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
MAC priority |
8 |
||
|
TrCH Type |
HS-DSCH |
||
|
TrCH identity /QueueID |
0 |
||
|
PhyCh Type |
PDSCH |
DPCH |
Secondary CCPCH |
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
8.3.48 Configuration of Cell_2DCH_MAC_2TM_dlSRB_E_HS (Rel-6 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.11.4d. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. (A13).
The configuration is applied to MAC(e/es) signalling tests in the DCH state where a PS RAB is setup for the interactive or background service class (A15):
– 2 TM PS RAB on DTCH is mapped on E-DCH in uplink and HS-DSCH in downlink.
– Uplink SRBs on DCCH are mapped on E-DCH.
– Downlink SRBs on DCCH are mapped on DCH.
Table 8.3.48.1: Uplink configuration of Cell_2DCH_MAC_2TM_dlSRB_E_HS
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
tsc_RB_DTCH_E_DCH_MAC2 (-22) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
||
|
RLC mode |
TM |
TM |
||
|
TrCH Type |
E-DCH |
|||
|
TrCH identity//Mac-d Flow Id |
2 |
3 |
1 |
|
|
PhyCh Type |
E-DPDCH |
PRACH |
||
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_PRACH1 (8) |
||
Table 8.3.48.2: Downlink configuration of Cell_2DCH_MAC_2TM_dlSRB_E_HS
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
tsc_RB_DTCH_E_DCH_MAC2 (-22) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
||
|
RLC mode |
TM |
TM |
||
|
MAC priority |
8 |
8 |
||
|
TrCH Type |
HS-DSCH |
HS-DSCH |
||
|
TrCH identity /QueueID |
0 |
1 |
||
|
PhyCh Type |
PDSCH |
DPCH |
Secondary CCPCH |
|
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|
8.3.49 Configuration of Cell_2DCH_1AM_1UM_E_HS (Rel-6 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.6.6. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to RRC signalling tests in the DCH state where a PS RAB is setup for the streaming or interactive or background service class and another UM PS Bearer is setup for conversational / unknown or speech (A16):
– 1 AM PS RAB and 1 UM PS RAB on DTCH are mapped on E-DCH in uplink and HS-DSCH in downlink.
– Uplink SRBs on DCCH are mapped on E-DCH.
– Downlink SRBs on DCCH are mapped on HS-DSCH.
In the downlink F-DPCH is configured.
Table 8.3.49.1: Uplink configuration of Cell_2DCH_1AM_1UM_E_HS
|
RB Identity |
tsc_RB25 (25) |
tsc_RB27 (27) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH3 (9) |
||
|
RLC mode |
AM |
UM |
||
|
TrCH Type |
E-DCH |
|||
|
TrCH identity//Mac-d Flow Id |
2 |
4 |
1 |
|
|
PhyCh Type |
E-DPDCH |
PRACH |
||
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_PRACH1 (8) |
||
Table 8.3.49.2: Downlink configuration of Cell_2DCH_1AM_1UM_E_HS
|
RB Identity |
tsc_RB25 (25) |
tsc_RB27 (27) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
||
|
LogCh Type |
DTCH |
DTCH |
||||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH3 (9) |
||||
|
RLC mode |
AM |
UM |
||||
|
MAC priority |
8 |
8 |
||||
|
TrCH Type |
HS-DSCH |
|||||
|
TrCH identity / Mac-d Flow Id |
0 |
3 |
1 |
|||
|
PhyCh Type |
PDSCH |
Secondary CCPCH |
||||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_S_CCPCH1 (5) |
||||
8.3.50 Configuration of Cell_3DCH_2AM_1UM_E_HS (Rel-6 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.6.7. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to RRC signalling tests in the DCH state where two PS RABs are setup for the streaming or interactive or background service class and another UM PS Bearer is setup for conversational / unknown or speech:
– 2 AM PS RABs and 1 UM PS RAB on DTCH are mapped on E-DCH in uplink and HS-DSCH in downlink.
– Uplink SRBs on DCCH are mapped on E-DCH.
– Downlink SRBs on DCCH are mapped on HS-DSCH.
In the downlink F-DPCH is configured.
Table 8.3.50.1: Uplink configuration of Cell_2DCH_1AM_1UM_E_HS
|
RB Identity |
tsc_RB25 (25) |
tsc_RB17 (17) |
tsc_RB27 (27) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
tsc_UL_DTCH3 (9) |
||
|
RLC mode |
AM |
AM |
UM |
||
|
TrCH Type |
E-DCH |
||||
|
TrCH identity//Mac-d Flow Id |
2 |
3 |
4 |
1 |
|
|
PhyCh Type |
E-DPDCH |
PRACH |
|||
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_PRACH1 (8) |
|||
Table 8.3.50.2: Downlink configuration of Cell_2DCH_1AM_1UM_E_HS
|
RB Identity |
tsc_RB25 (25) |
tsc_RB17 (17) |
tsc_RB27 (27) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
||
|
LogCh Type |
DTCH |
DTCH |
DTCH |
||||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
||||
|
RLC mode |
AM |
AM |
UM |
||||
|
MAC priority |
8 |
8 |
8 |
||||
|
TrCH Type |
HS-DSCH |
||||||
|
TrCH identity / Mac-d Flow Id |
0 |
2 |
3 |
1 |
|||
|
PhyCh Type |
PDSCH |
Secondary CCPCH |
|||||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_S_CCPCH1 (5) |
|||||
8.3.51 Configuration of Cell_Four_DTCH_CS_E_HS_5SRB (Rel-6 or later)
The configuration is based on 3GPP TS 34.108 [3], clauses6.10.2.4.6.8. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to RB tests.
The uplink configuration is same as in clause 8.3.45 Cell_Four_DTCH_E_HS_CS and Cell_Four_DTCH_CS_E_HS.
The downlink configuration is the same as in clause 8.3.52 Cell_Four_DTCH_HS_5SRB.
8.3.52 Configuration of Cell_Four_DTCH_HS_5SRB (Rel-5 or later)
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.5.8. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to RB tests.
The uplink configuration is same in clause 8.3.36 Cell_Four_DTCH_HS_CS and Cell_Four_DTCH_CS_HS.
Table 8.3.52: Downlink configuration of Cell_Four_DTCH_HS_5SRB
|
RB Identity |
tsc_RB25 (25) |
tsc_RB10 (10) |
tsc_RB11 (11) |
tsc_RB12 (12) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB5 (5) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
DTCH |
DCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
|
LogCh Identity |
tsc_DL_DTCH41 (107) |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_DL_DCCH5 (5) |
|
|
RLC mode |
AM |
TM |
TM |
TM |
UM |
AM |
AM |
AM |
TM |
|
|
MAC priority |
8 |
1 |
1 |
1 |
1 |
2 |
3 |
4 |
5 |
|
|
TrCH Type |
HS-DSCH |
DCH |
DCH |
DCH |
DCH |
DCH |
||||
|
TrCH/ Q- identity |
0 |
Tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
tsc_DL_DCH3 (8) |
tsc_DL_DCH5 (10) |
tsc_DL_DCH6 (22) |
||||
|
PhyCh Type |
PDSCH |
DPCH |
Secondary CCPCH |
|||||||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|||||||
8.3.53 Configuration of Cell_E_HS_StandAloneSRB/ Cell_E_HS_StandAloneSRB_NoConn (Rel-6 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.6.1a. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to stand-alone SRB RRC signalling tests in the DCH:
– Uplink SRBs on DCCH are mapped on E-DCH.
– Downlink SRBs on DCCH are mapped on HS-DSCH.
Additionally UL-DPCCH and HS-DPCCH are configured in UL as well as F-DPCH is configured in DL.
Table 8.3.53.1: Uplink configuration of Cell_E_HS_StandAloneSRB/ Cell_E_HS_StandAloneSRB_NoConn
|
RB Identity |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DCCH |
DCCH |
DCCH |
DCCH |
|
|
LogCh Identity |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
|
|
RLC mode |
UM |
AM |
AM |
AM |
|
|
TrCH Type |
E-DCH |
||||
|
TrCH identity / Mac-d Flow Id |
tsc_E_DCH_MAC_d_FlowId_DCCH (1) |
||||
|
PhyCh Type |
E-DPDCH |
PRACH |
|||
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_PRACH1 (8) |
|||
Table 8.3.53.2: Downlink configuration of Cell_E_HS_StandAloneSRB/ Cell_E_HS_StandAloneSRB_NoConn
|
RB Identity |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DCCH |
DCCH |
DCCH |
DCCH |
|
|
LogCh Identity |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
|
|
RLC mode |
UM |
AM |
AM |
AM |
|
|
MAC priority |
1 |
2 |
3 |
4 |
|
|
TrCH Type |
HS-DSCH |
||||
|
TrCH identity / Mac-d Flow Id |
tsc_HS_DSCH_MAC_d_FlowId_DCCH (1) |
||||
|
PhyCh Type |
HS-PDSCH |
Secondary CCPCH |
|||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_S_CCPCH1 (5) |
|||
8.3.54 MBMS channel configuration (Rel-6 or later)
The MBMS channel configurations are configured in addition to any existing configurations defined in clause 8.3.
8.3.54.1 Configuration cell_MBMS_MCCH (Rel-6 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.
The configuration is applied to the MBMS tests.
Table 8.3.54.1: cell_MBMS_MCCH
|
RB Identity |
tsc_RB_MCCH (8) |
|
LogCh Type |
MCCH |
|
LogCh Identity |
tsc_MCCH1 (1) |
|
RLC mode |
UM |
|
MAC priority |
1 |
|
TrCH Type |
FACH |
|
TrCH identity |
tsc_FACH3 (16) |
|
PhyCh Type |
Secondary CCPCH |
|
PhyCH identity |
tsc_S_CCPCH2 (10) |
8.3.54.2 Configuration cell_MBMS_MCCH_One_MTCH (Rel-6 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.
The configuration is applied to the MBMS tests.
Table 8.3.54.2: cell_MBMS_MCCH_One_MTCH
|
RB Identity |
tsc_RB_MCCH (8) |
tsc_RB_MTCH1 (14) |
|
LogCh Type |
MCCH |
MTCH |
|
LogCh Identity |
tsc_MCCH1 (1) |
tsc_MTCH1 (1) |
|
RLC mode |
UM |
UM |
|
MAC priority |
1 |
1 |
|
TrCH Type |
FACH |
FACH |
|
TrCH identity |
tsc_FACH3 (16) |
tsc_FACH4 (17) |
|
PhyCh Type |
Secondary CCPCH |
Secondary CCPCH |
|
PhyCH identity |
tsc_S_CCPCH2 (10) |
tsc_S_CCPCH3 (13) |
8.3.55 Configuration of PS Cell_DCH_64kPS_AM_RAB
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.1.26. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to MBMS tests in the DCH state where a PS RAB on DTCH is setup for the interactive or background service class.
Table 8.3.55.1: Uplink configuration of PS Cell_DCH_64kPS_AM_RAB
|
RB Identity |
tsc_RB22 (22) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH2 (8) |
||
|
RLC mode |
AM |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_UL_DCH1 (1) |
||
|
PhyCh Type |
DPDCH |
PRACH |
|
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|
Table 8.3.55.2: Downlink configuration of PS Cell_DCH_64kPS_AM_RAB
|
RB Identity |
tsc_RB22 (22) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH2 (8) |
||
|
RLC mode |
AM |
||
|
MAC priority |
1 |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_DL_DCH1 (6) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|
8.3.56 Configuration of PS Cell_MBMS_PTPRB
The configuration is based on, clause 6.10.2.4.1.58. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to MBMS PTP RB test cases.
The uplink configuration is same in clause 8.3.2 Cell_DCH_StandAloneSRB.
Table 8.3.56: Downlink configuration of Cell_MBMS_PTPRB
|
RB Identity |
tsc_RB21 (21) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH2 (8) |
||
|
RLC mode |
UM |
||
|
MAC priority |
1 |
||
|
TrCH Type |
DCH |
||
|
TrCH identity |
tsc_DL_DCH2 (7) |
||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|
8.3.57 Configuration of PS Cell_MBMS_PTPRB_AM
The configuration is based on, clause 6.10.2.4.1.58. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to MBMS PTP RB test cases, with additional PS RAB established.
The uplink configuration is same in clause 8.3.8 Cell_DCH_64kPS_RAB_SRB and Cell_PDCP_AM_RAB.
Table 8.3.57: Downlink configuration of PS Cell_MBMS_PTPRB_AM
|
RB Identity |
tsc_RB20 (20) |
tsc_RB21 (21) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
|
LogCh Type |
DTCH |
DTCH |
|||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
|||
|
RLC mode |
AM |
UM |
|||
|
MAC priority |
1 |
1 |
|||
|
TrCH Type |
DCH |
DCH |
|||
|
TrCH identity |
tsc_DL_DCH1 (6) |
tsc_DL_DCH2 (7) |
|||
|
PhyCh Type |
DPCH |
Secondary CCPCH |
|||
|
PhyCH identity |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
|||
8.3.58 Configuration of Cell_FACH_MCCH_SRB / Cell_FACH_MCCH_NoDedicated
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.9 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the MBMS tests related in the states CELL_FACH, CELL_PCH and URA_PCH.
The uplink configuration is same in clause 8.3.1 Cell_FACH.
Table 8.3.58: Downlink configuration of Cell_FACH_MCCH_NoConn /
Cell_FACH_MCCH_SRB / Cell_FACH_MCCH_NoDedicated
|
RB Identity |
tsc_RB20 (20) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_MCCH (8) |
tsc_RB_PCCH (-2) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
MCCH |
PCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
Tsc_DL_CCCH5 (5) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_MCCH1 (1) |
tsc_PCCH1 (1) |
|
RLC mode |
AM |
UM |
UM |
AM |
AM |
AM |
UM |
TM |
|
MAC priority |
1 |
1 |
2 |
3 |
4 |
5 |
1 |
1 |
|
TrCH Type |
FACH |
FACH |
FACH |
PCH |
||||
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
tsc_FACH3 (16) |
tsc_PCH1 (12) |
||||
|
PhyCh Type |
Secondary CCPCH |
|||||||
|
PhyCH identity |
tsc_S_CCPCH1 (5) |
|||||||
8.3.59 Configuration of Cell_DCH_MCCH_PS
The configuration is based on 3GPP TS 34.108 [3], clause . The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to the MBMS signalling tests in the DCH state.
The uplink configuration is same in clause 8.3.8 Cell_DCH_64kPS_RAB_SRB
Table 8.3.59: Downlink configuration of Cell_DCH_MCCH_PS
|
RB Identity |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB20 (20) |
tsc_RB0 (0) |
tsc_RB_PCCH (-2) |
tsc_RB_MCCH (8) |
|
|
LogCh Type |
DCCH |
DCCH |
DCCH |
DCCH |
DTCH |
CCCH |
PCCH |
MCCH |
|
|
LogCh Identity |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_DL_DTCH1 (7) |
tsc_DL_CCCH5 (5) |
tsc_PCCH1 (1) |
tsc_MCCH1 (1) |
|
|
RLC mode |
UM |
AM |
AM |
AM |
AM |
UM |
TM |
UM |
AM |
|
MAC priority |
1 |
2 |
3 |
4 |
1 |
1 |
1 |
1 |
1 |
|
TrCH Type |
DCH |
DCH |
FACH |
PCH |
FACH |
FACH |
|||
|
TrCH identity |
tsc_DL_DCH5 (10) |
tsc_DL_DCH1 (6) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
tsc_FACH3 (16) |
tsc_FACH2 (16) |
|||
|
PhyCh Type |
DPCH tsc_DL_DPCH1 (26) |
Secondary CCPCH |
|||||||
|
PhyCH identity |
tsc_S_CCPCH1 (5) |
||||||||
8.3.60 Configuration of PS Cell_DCH_1AM_2AM_HS_DSCH (Rel-6 or later)
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.5.10. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 with 2 AM RAB and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1. The configuration is applied to RAB test cases.
Table 8.3.60.1: Uplink configuration of Cell_DCH_1AM_2AM_HS_DSCH
|
RB Identity |
tsc_RB25 (25) |
tsc_RB17 (17) |
tsc_RB28 (28) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
tsc_UL_DTCH3 (9) |
||
|
RLC mode |
AM |
AM |
|||
|
TrCH Type |
DCH |
DCH |
|||
|
TrCH identity |
tsc_UL_DCH1 (1) |
tsc_UL_DCH2 (2) |
|||
|
PhyCh Type |
DPDCH |
PRACH |
|||
|
PhyCH identity |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
|||
Table 8.3.60.2: Downlink configuration of Cell_DCH_1AM_2AM_HS_DSCH
|
RB Identity |
tsc_RB25 (25) |
tsc_RB17 (17) |
tsc_RB28 (28) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
||
|
RLC mode |
AM |
AM |
AM |
||
|
MAC priority |
8 |
8 |
8 |
||
|
TrCH Type |
HS-DSCH |
HS-DSCH |
HS-DSCH |
||
|
TrCH identity /QueueID |
0 |
2 |
3 |
||
|
PhyCh Type |
PDSCH |
DPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
||
8.3.61 Configuration of Cell_FACH_enhDL_PCH (Rel-7 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.4.3 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RRC tests related in the states CELL_PCH and URA_PCH. They need a minimum radio configuration for testing.
The configuration is applied to RRC signalling tests in the PCH states where a PS RAB is setup for the interactive or background service class (A):
– PS RAB on DTCH is mapped on S-CCPCH in uplink and HS-DSCH in downlink.
- Downlink SRBs on DCCH are mapped on HS-DSCH;
- Uplink SRBs on DCCH are mapped on PRACH.
Table 8.3.61.1: Uplink configuration of Cell_FACH_enhDL_PCH
|
RB Identity |
tsc_RB25 (25) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
LogCh Identity |
Tsc_UL_DTCH1 (7) |
tsc_UL_CCCH5 (5) |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
|
RLC mode |
AM |
TM |
UM |
AM |
AM |
AM |
|
TrCH Type |
RACH |
|||||
|
TrCH identity |
tsc_RACH1 (15) |
|||||
|
PhyCh Type |
PRACH |
|||||
|
PhyCH identity |
tsc_PRACH1 (8) |
|||||
Table 8.3.61.2: Downlink configuration of Cell_FACH_enhDL_PCH
|
RB Identity |
tsc_RB25 (25) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
PCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_CCCH2 (2) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
tsc_PCCH_FACH (11) |
|
RLC mode |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
TM |
|
MAC priority |
8 |
1 |
2 |
3 |
4 |
5 |
1 |
1 |
|
TrCH Type |
HS-DSCH |
HS-DSCH |
HS-DSCH |
HS-DSCH |
HS-DSCH |
|||
|
TrCH identity / Mac-d Flow Id |
2 |
0 |
1 |
NA |
NA |
|||
|
PhyCh Type |
PDSCH |
|||||||
|
PhyCH identity |
tsc_HSPDSCH (18) |
|||||||
8.3.62 Configuration of Cell_FACH_enhDL_PS (Rel-7 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.4.3 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RRC tests related in the states CELL_FACH. They need a minimum radio configuration for testing.
The configuration is applied to RRC signalling tests in the FACH state where a PS RAB is setup for the interactive or background service class (A):
– PS RAB on DTCH is mapped on PRACH in uplink and HS-DSCH in downlink.
– Uplink SRBs on DCCH and CCCH are mapped on PRACH.
– Downlink SRBs on DCCH are mapped on HS-DSCH.
Table 8.3.62.1: Uplink configuration of Cell_FACH_enhDL_PS
|
RB Identity |
tsc_RB25 (25) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
LogCh Identity |
Tsc_UL_DTCH1 (7) |
tsc_UL_CCCH5 (5) |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
|
RLC mode |
AM |
TM |
UM |
AM |
AM |
AM |
|
TrCH Type |
RACH |
|||||
|
TrCH identity |
tsc_RACH1 (15) |
|||||
|
PhyCh Type |
PRACH |
|||||
|
PhyCH identity |
tsc_PRACH1 (8) |
|||||
Table 8.3.62.2: Downlink configuration of Cell_FACH_enhDL_PS
|
RB Identity |
tsc_RB25 (25) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_CCCH2 (2) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
|
RLC mode |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
|
MAC priority |
8 |
1 |
2 |
3 |
4 |
5 |
1 |
|
TrCH Type |
HS-DSCH |
HS-DSCH |
HS-DSCH |
HS-DSCH |
|||
|
TrCH identity / Mac-d Flow Id |
2 |
0 |
1 |
NA |
|||
|
PhyCh Type |
PDSCH |
||||||
|
PhyCH identity |
tsc_HSPDSCH (18) |
||||||
8.3.63 Configuration of Cell_E_HS_UM (Rel-7 or later)
The configuration is based on 3GPP TS 34.108 [3], clauses 6.10.2.4.6.9 and 6.10.2.4.6.10. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to signalling tests in the DCH state where a PS RAB is setup for CS voice over HSPA(A23):
– UM PS RAB on DTCH is mapped on E-DCH in uplink and HS-DSCH in downlink.
– SRBs on DCCH are mapped on E-DCH in uplink and HS-DSCH in downlink.
Table 8.3.63.1: Uplink configuration of Cell_E_HS_UM
|
RB Identity |
tsc_RB26 (26) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
|
LogCh Type |
DTCH |
|||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
|||
|
RLC mode |
UM |
|||
|
TrCH Type |
E-DCH |
|||
|
TrCH identity/ Mac-d Flow Id |
2 |
1 |
||
|
PhyCh Type |
E-DPDCH |
PRACH |
||
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_PRACH1 (8) |
||
Table 8.3.63.2: Downlink configuration of Cell_E_HS_UM
|
RB Identity |
tsc_RB26 (26) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
|
LogCh Type |
DTCH |
|||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
|||
|
RLC mode |
UM |
|||
|
MAC priority |
8 |
|||
|
TrCH Type |
HS-DSCH |
|||
|
TrCH identity / Mac-d Flow Id |
0 |
1 |
||
|
PhyCh Type |
PDSCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_S_CCPCH1 (5) |
||
8.3.64 Configuration of Cell_FACH_enhDL_SRB (Rel-7 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.4.3 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RRC tests related in the states CELL_FACH. They need a minimum radio configuration for testing.
The configuration is applied to RRC signalling tests in the FACH state with a signalling connection:
– Uplink SRBs on DCCH are mapped on PRACH.
– Downlink SRBs on DCCH are mapped on HS-DSCH.
Table 8.3.64.1: Uplink configuration of Cell_FACH_enhDL_SRB
|
RB Identity |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
|
LogCh Type |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
LogCh Identity |
tsc_UL_CCCH5 (5) |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
|
RLC mode |
TM |
UM |
AM |
AM |
AM |
|
TrCH Type |
RACH |
||||
|
TrCH identity |
tsc_RACH1 (15) |
||||
|
PhyCh Type |
PRACH |
||||
|
PhyCH identity |
tsc_PRACH1 (8) |
||||
Table 8.3.64.2: Downlink configuration of Cell_FACH_enhDL_SRB
|
RB Identity |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
|
LogCh Type |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
|
LogCh Identity |
tsc_DL_CCCH2 (2) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
|
RLC mode |
UM |
UM |
AM |
AM |
AM |
TM |
|
MAC priority |
1 |
2 |
3 |
4 |
5 |
1 |
|
TrCH Type |
HS-DSCH |
HS-DSCH |
HS-DSCH |
|||
|
TrCH identity / Mac-d Flow Id |
0 |
1 |
NA |
|||
|
PhyCh Type |
PDSCH |
|||||
|
PhyCH identity |
tsc_HSPDSCH (18) |
|||||
8.3.65 Configuration of Cell_DCH_3TM_dlSRB_E_HS (Rel-8 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.6.2. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to MAC signalling tests in the DCH state where a PS RAB is setup for the interactive or background service class (A26):
– 3 PS UM RAB on DTCH are mapped on E-DCH in uplink and HS-DSCH in downlink.
– Uplink SRBs on DCCH are mapped on E-DCH.
– Downlink SRBs on DCCH are mapped on DCH.
Table 8.3.65.1: Uplink configuration of Cell_DCH_3TM_dlSRB_E_HS
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC0 (-20) |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
tsc_RB_DTCH_E_DCH_MAC2 (-22) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
tsc_UL_DTCH3 (9) |
||
|
RLC mode |
TM |
TM |
TM |
||
|
TrCH Type |
E-DCH |
||||
|
TrCH identity//Mac-d Flow Id |
2 |
3 |
4 |
1 |
|
|
PhyCh Type |
E-DPDCH |
PRACH |
|||
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_PRACH1 (8) |
|||
Table 8.3.65.2: Downlink configuration of Cell_DCH_3TM_dlSRB_E_HS
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC0 (-20) |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
tsc_RB_DTCH_E_DCH_MAC2 (-22) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
tsc_DL_DTCH3 (9) |
||
|
RLC mode |
TM |
TM |
TM |
||
|
MAC priority |
8 |
8 |
8 |
||
|
TrCH Type |
HS-DSCH |
||||
|
TrCH identity /QueueID |
2 |
3 |
4 |
||
|
PhyCh Type |
PDSCH |
DPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
||
8.3.66 Configuration of Cell_E_HS_TM (Rel-8 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.6.9 and 6.10.2.4.6.10. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to MAC(i/is) signalling tests in the DCH state where a PS RAB is setup for the interactive or background service class (A27):
– TM PS RAB on DTCH is mapped on E-DCH in uplink and HS-DSCH in downlink.
– SRBs on DCCH are mapped on E-DCH in uplink and HS-DSCH in downlink.
Table 8.3.66.1: Uplink configuration of Cell_E_HS_TM
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
|
LogCh Type |
DTCH |
|||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
|||
|
RLC mode |
TM |
|||
|
TrCH Type |
E-DCH |
|||
|
TrCH identity/ Mac-d Flow Id |
2 |
1 |
||
|
PhyCh Type |
E-DPDCH |
PRACH |
||
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_PRACH1 (8) |
||
Table 8.3.66.2: Downlink configuration of Cell_E_HS_TM
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
|
LogCh Type |
DTCH |
|||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
|||
|
RLC mode |
TM |
|||
|
MAC priority |
8 |
|||
|
TrCH Type |
HS-DSCH |
|||
|
TrCH identity / Mac-d Flow Id |
0 |
1 |
||
|
PhyCh Type |
PDSCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_S_CCPCH1 (5) |
||
8.3.67 Dual cell configurations (Rel-8 or later)
8.3.67.1 Configuration of cell_SecondaryDualCell_SRB (Rel-8 or later)
The configuration is applied to the HS-DSCH secondary serving cell where a PS RAB is setup with dual cell activated (A25):
– Downlink PS RAB is mapped on HS-DSCH in downlink.
– Downlink SRBs on DCCH are mapped on HS-DSCH.
There is no uplink configuration. The related HS-DSCH serving cell is configured in cell_E_HS.
Table 8.3.67.1: Downlink cell_SecondaryDualCell_SRB
|
RB Identity |
tsc_RB25 (25) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
|
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
AM |
||
|
MAC priority |
8 |
||
|
TrCH Type |
HS-DSCH |
||
|
TrCH identity / Mac-d Flow Id |
0 |
1 |
|
|
PhyCh Type |
PDSCH |
||
|
PhyCH identity |
tsc_HSPDSCH (18) |
||
8.3.67.2 Configuration of cell_SecondaryDualCell_RAB (Rel-8 or later)
The configuration is applied to the HS-DSCH secondary serving cell where a PS RAB is setup with dual cell activated:
– Downlink PS RAB is mapped on HS-DSCH in downlink.
There is no uplink configuration. The related HS-DSCH serving cell is configured in cell_DCH_HS_DSCH or cell_DCH_E_HS or Cell_DCH_dlSRB_E_HS.
Table 8.3.67.2: Downlink cell_SecondaryDualCell_RAB
|
RB Identity |
tsc_RB25 (25) |
|
LogCh Type |
DTCH |
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
|
RLC mode |
AM |
|
MAC priority |
8 |
|
TrCH Type |
HS-DSCH |
|
TrCH identity / Mac-d Flow Id |
0 |
|
PhyCh Type |
PDSCH |
|
PhyCH identity |
tsc_HSPDSCH (18) |
8.3.67.3 Configuration of cell_SecondaryDualCell_2RAB (Rel-8 or later)
The configuration is applied to the HS-DSCH secondary serving cell where 2 PS RAB are setup with dual cell activated:
– 2 Downlink PS AM RABs are mapped on HS-DSCH in downlink.
There is no uplink configuration. The related HS-DSCH serving cell is configured in Cell_DCH_2AM_HS_DSCH.
Table 8.3.67.3: Downlink cell_SecondaryDualCell_2RAB
|
RB Identity |
tsc_RB25 (25) |
tsc_RB17 (17) |
|
LogCh Type |
DTCH |
DTCH |
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
|
RLC mode |
AM |
AM |
|
MAC priority |
8 |
8 |
|
TrCH Type |
HS-DSCH |
HS-DSCH |
|
TrCH identity / Mac-d Flow Id |
0 |
1 |
|
PhyCh Type |
PDSCH |
PDSCH |
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_HSPDSCH (18) |
8.3.67.4 Void
8.3.67.5 Configuration of cell_SecondaryDCU_SRB_2TM (Rel-9 or later)
The configuration is applied to the HS-DSCH secondary serving cell where 2 PS RAB are setup with dual cell HSUPA activated:
– 2 Downlink PS RABs are mapped on HS-DSCH in downlink.
– 2 Uplink PS RABs are mapped on E-DCH.
– SRBs on DCCH are mapped on E-DCH in uplink and HS-DSCH in downlink.
The related HS-DSCH serving cell is configured in cell_E_HS_2TM.
Table 8.3.67.5.1: Uplink cell_SecondaryDCU_SRB_2TM
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
tsc_RB_DTCH_E_DCH_MAC2 (-22) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
|
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
||
|
RLC mode |
TM |
TM |
||
|
TrCH Type |
E-DCH |
|||
|
TrCH identity/ Mac-d Flow Id |
2 |
3 |
1 |
|
|
PhyCh Type |
E-DPDCH |
|||
|
PhyCH identity |
tsc_E_DPCH (22) |
|||
Table 8.3.67.5.2: Downlink cell_SecondaryDCU_SRB_2TM
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
tsc_RB_DTCH_E_DCH_MAC2 (-22) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
|
LogCh Type |
DTCH |
DTCH |
|
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
|
|
RLC mode |
TM |
TM |
|
|
MAC priority |
8 |
8 |
|
|
TrCH Type |
HS-DSCH |
HS-DSCH |
HS-DSCH |
|
TrCH identity /QueueID |
0 |
2 |
1 |
|
PhyCh Type |
PDSCH |
||
|
PhyCH identity |
tsc_HSPDSCH (18) |
||
8.3.67.6 Configuration of cell_SecondaryDCU_SRB_RAB (Rel-9 or later)
The configuration is applied to the HS-DSCH secondary serving cell where 1 PS RAB is setup with dual cell HSUPA activated:
– The downlink configuration is the same as cell_SecondaryDualCell_SRB
– 1 Uplink PS RAB is mapped on E-DCH.
– Uplink SRBs on DCCH are mapped on E-DCH.
The related HS-DSCH serving cell is configured in Cell_E_HS
Table 8.3.67.6.1: Uplink cell_SecondaryDCU_SRB_RAB
|
RB Identity |
tsc_RB25 (25) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
|
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
AM |
||
|
TrCH Type |
E-DCH |
||
|
TrCH identity/ Mac-d Flow Id |
2 |
1 |
|
|
PhyCh Type |
E-DPDCH |
||
|
PhyCH identity |
tsc_E_DPCH (22) |
||
8.3.67.7 Configuration of cell_SecondaryDCU_SRB_TM (Rel-9 or later)
The configuration is applied to the HS-DSCH secondary serving cell where 1 PS RAB is setup with dual cell HSUPA activated:
– 1 Downlink PS RAB is mapped on HS-DSCH in downlink.
– 1 Uplink PS RAB is mapped on E-DCH.
– SRBs on DCCH are mapped on E-DCH in uplink and HS-DSCH in downlink.
The related HS-DSCH serving cell is configured in Cell_E_HS_MAC_TM_RAB
Table 8.3.67.7.1: Uplink cell_SecondaryDCU_SRB_TM
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
|
LogCh Type |
DTCH |
|
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
|
|
RLC mode |
TM |
|
|
TrCH Type |
E-DCH |
|
|
TrCH identity/ Mac-d Flow Id |
2 |
1 |
|
PhyCh Type |
E-DPDCH |
|
|
PhyCH identity |
tsc_E_DPCH (22) |
|
Table 8.3.67.7.2: Downlink cell_SecondaryDCU_SRB_TM
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
|
LogCh Type |
DTCH |
|
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
|
|
RLC mode |
TM |
|
|
MAC priority |
8 |
|
|
TrCH Type |
HS-DSCH |
HS-DSCH |
|
TrCH identity /QueueID |
0 |
1 |
|
PhyCh Type |
PDSCH |
|
|
PhyCH identity |
tsc_HSPDSCH (18) |
|
8.3.68 Enhanced FACH Uplink configurations (Rel-8 or later)
8.3.68.1 Configuration of Cell_FACH_UL_SRB (Rel-8 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.7.1 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RRC tests related in the states CELL_FACH. They need a minimum radio configuration for testing.
The configuration is applied to RRC signalling tests in the FACH state where a signalling connection is setup:
– Uplink SRBs on DCCH and CCCH are mapped on E-DCH.
– Downlink SRBs on DCCH are mapped on HS-DSCH.
The downlink configuration is same as in clause 8.3.64 Cell_FACH_enhDL_SRB
Table 8.3.68.1-1: Uplink configuration of Cell_FACH_UL_SRB
|
RB Identity |
tsc_RB0 (0) |
tsc_RB0_EFUL (0-28) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
|
LogCh Type |
CCCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
LogCh Identity |
tsc_UL_CCCH5 (5) |
tsc_UL_CCCH_EFUL5 (15) |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
|
RLC mode |
TM |
TM |
UM |
AM |
AM |
AM |
|
TrCH Type |
RACH |
E-DCH |
||||
|
TrCH identity/ Mac-d Flow Id |
tsc_RACH1 (15) |
7 |
1 |
|||
|
PhyCh Type |
PRACH |
E-DPDCH |
||||
|
PhyCH identity |
tsc_PRACH1 (8) |
tsc_E_DPCH (22) |
||||
8.3.68.2 Configuration of Cell_FACH_UL_PS (Rel-8 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.7.1 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RRC tests related in the states CELL_FACH. They need a minimum radio configuration for testing.
The configuration is applied to RRC signalling tests in the FACH state where a PS RAB is setup:
– PS RAB on DTCH is mapped on E-DCH in uplink and HS-DSCH in downlink.
– Uplink SRBs on DCCH and CCCH are mapped on E-DCH.
– Downlink SRBs on DCCH are mapped on HS-DSCH.
The downlink configuration is same as in clause 8.3.62 Cell_FACH_enhDL_PS.
Table 8.3.68.2: Uplink configuration of Cell_FACH_UL_PS
|
RB Identity |
tsc_RB0 (0) |
tsc_RB25 (25) |
tsc_RB0_EFUL (0-28) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
|
LogCh Type |
CCCH |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
LogCh Identity |
tsc_UL_CCCH5 (5) |
Tsc_UL_DTCH1 (7) |
tsc_UL_CCCH5_EFUL (15) |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
|
RLC mode |
TM |
AM |
TM |
UM |
AM |
AM |
AM |
|
TrCH Type |
RACH |
E-DCH |
|||||
|
TrCH identity/ Mac-d Flow Id |
tsc_RACH1 (15) |
0 |
7 |
1 |
|||
|
PhyCh Type |
PRACH |
E-DPDCH |
|||||
|
PhyCH identity |
tsc_PRACH1 (8) |
tsc_E_DPCH (22) |
|||||
8.3.68.3 Configuration of Cell_FACH_UL_TM_PS (Rel-8 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.7.1 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RRC tests related in the states CELL_FACH. They need a minimum radio configuration for testing.
The configuration is applied to RRC signalling tests in the FACH state where a PS RAB is setup:
– PS RAB in TM on DTCH is mapped on E-DCH in uplink and HS-DSCH in downlink.
– Uplink SRBs on DCCH and CCCH are mapped on E-DCH.
– Downlink SRBs on DCCH are mapped on HS-DSCH.
Table 8.3.68.3.1: Uplink configuration of Cell_FACH_UL_TM_PS
|
RB Identity |
tsc_RB0 (0) |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
tsc_RB0_EFUL (0-28) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
|
LogCh Type |
CCCH |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
LogCh Identity |
tsc_UL_CCCH5 (5) |
tsc_UL_DTCH1 (7) |
tsc_UL_CCCH5_EFUL (15) |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
|
RLC mode |
TM |
TM |
TM |
UM |
AM |
AM |
AM |
|
TrCH Type |
RACH |
E-DCH |
|||||
|
TrCH identity/ Mac-d Flow Id |
tsc_RACH1 (15) |
0 |
7 |
1 |
|||
|
PhyCh Type |
PRACH |
E-DPDCH |
|||||
|
PhyCH identity |
tsc_PRACH1 (8) |
tsc_E_DPCH (22) |
|||||
Table 8.3.68.3.2: Downlink configuration of Cell_FACH_UL_TM_PS
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_CCCH2 (2) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
|
RLC mode |
TM |
UM |
UM |
AM |
AM |
AM |
TM |
|
MAC priority |
8 |
1 |
2 |
3 |
4 |
5 |
1 |
|
TrCH Type |
HS-DSCH |
HS-DSCH |
HS-DSCH |
HS-DSCH |
|||
|
TrCH identity / Mac-d Flow Id |
2 |
0 |
1 |
NA |
|||
|
PhyCh Type |
PDSCH |
||||||
|
PhyCH identity |
tsc_HSPDSCH (18) |
||||||
8.3.68.4 Configuration of Cell_FACH_UL_NoDedicated (Rel-8 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.7.1 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink.
The configuration is applied to signalling tests in the enhanced FACH state for a non serving cell where:
– Uplink SRBs on CCCH are mapped on E-DCH.
The downlink configuration is same as in clause 8.3.1a Cell_FACH_NoDedicated
Table 8.3.68.4.1: Uplink configuration of Cell_FACH_UL_NoDedicated
|
RB Identity |
tsc_RB0 (0) |
tsc_RB0_EFUL (-28) |
|
LogCh Type |
CCCH |
CCCH |
|
LogCh Identity |
tsc_UL_CCCH5 (5) |
tsc_UL_CCCH_EFUL (15) |
|
RLC mode |
TM |
TM |
|
TrCH Type |
RACH |
E-DCH |
|
TrCH identity/ Mac-d Flow Id |
tsc_RACH1 (15) |
7 |
|
PhyCh Type |
PRACH |
E-DPDCH |
|
PhyCH identity |
tsc_PRACH1 (8) |
tsc_E_DPCH (22) |
8.3.68.5 Configuration of Cell_FACH_UL_FallBack (Rel-11 or later)
The configuration is based on 3GPP TS 34.108[3], clause 6.10.2.4.7.1 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the MAC tests related in the states further enhanced CELL_FACH. They need a minimum radio configuration for testing.
The configuration is applied to MAC signalling tests in the further enhanced FACH state where a PS RAB is setup:
– PS RAB on DTCH is mapped on PRACH in uplink and HS-DSCH in downlink
– Uplink SRBs on DCCH and CCCH are mapped on PRACH
– Downlink SRBs on DCCH are mapped on HS-DSCH
The downlink configuration is same as in clause 8.3.62 Cell_FACH_enhDL_PS.
Table 8.3.68.5-1: Uplink configuration of Cell_FACH_UL_FallBack
|
RB Identity |
tsc_RB0_EFUL (0-28) |
tsc_RB25 (25) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
|
LogCh Type |
CCCH |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
LogCh Identity |
tsc_UL_CCCH5_EFUL (15) |
tsc_UL_DTCH1 (7) |
tsc_UL_CCCH5 (5) |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
|
RLC mode |
TM |
AM |
TM |
UM |
AM |
AM |
AM |
|
TrCH Type |
E-DCH |
RACH |
|||||
|
TrCH identity/ Mac-d Flow Id |
7 |
tsc_RACH1 (15) |
|||||
|
PhyCh Type |
E-DPDCH |
PRACH |
|||||
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_PRACH1 (8) |
|||||
8.3.68.6 Configuration of Cell_FACH_UL_SRB_NoConn (Rel-8 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.7.1 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RRC tests related in the states CELL_FACH. They need a minimum radio configuration for testing.
The configuration is applied to RRC signalling tests in the FACH state when UE is in idle mode:
– Uplink SRBs on DCCH and CCCH are mapped on E-DCH.
– Downlink SRBs on DCCH are mapped on S-CCPCH.
Table 8.3.68.6-1: Uplink configuration of Cell_FACH_UL_SRB_NoConn
|
RB Identity |
tsc_RB0 (0) |
tsc_RB0_EFUL (0-28) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
|
LogCh Type |
CCCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
LogCh Identity |
tsc_UL_CCCH5 (5) |
tsc_UL_CCCH_EFUL5 (15) |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
|
RLC mode |
TM |
TM |
UM |
AM |
AM |
AM |
|
TrCH Type |
RACH |
E-DCH |
||||
|
TrCH identity/ Mac-d Flow Id |
tsc_RACH1 (15) |
7 |
1 |
|||
|
PhyCh Type |
PRACH |
E-DPDCH |
||||
|
PhyCH identity |
tsc_PRACH1 (8) |
tsc_E_DPCH (22) |
||||
Table 8.3.68.6-2: Downlink configuration of Cell_FACH_UL_SRB_NoConn
|
RB Identity |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
|
LogCh Type |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
PCCH |
|
LogCh Identity |
tsc_DL_CCCH5 (5) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
tsc_PCCH1 (1) |
|
RLC mode |
UM |
UM |
AM |
AM |
AM |
TM |
TM |
|
MAC priority |
1 |
2 |
3 |
4 |
5 |
6 |
1 |
|
TrCH Type |
FACH |
PCH |
|||||
|
TrCH identity |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
|||||
|
PhyCh Type |
Secondary CCPCH |
||||||
|
PhyCH identity |
tsc_S_CCPCH1 (5) |
||||||
8.3.69 Configuration of Cell_FACH_2_SCCPCH_CTCHenhDL_PS (Rel-8 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RAB tests.
The uplink configuration of Cell_FACH_2_SCCPCH_CTCH enhDL_PS is the same as the uplink configuration of Cell_FACH_enhDL_PS.
Table 8.3.69.1: Downlink configuration of Cell_FACH_2_SCCPCH_CTCHenhDL_PS:
1st & 2nd S-CCPCH
|
RB Identity |
tsc_RB30 (30) |
|||
|
LogCh Type |
CTCH |
|||
|
LogCh Identity |
tsc_CTCH1 (11) |
|||
|
RLC mode |
UM |
UM |
TM |
TM |
|
MAC priority |
7 |
1 |
6 |
1 |
|
TrCH Type |
FACH |
FACH |
PCH |
|
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
|
|
PhyCh Type |
Secondary CCPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_S_CCPCH2 (10) |
tsc_S_CCPCH1 (5) |
||
Table 8.3.69.2: Downlink configuration of Cell_FACH_2_SCCPCH_CTCHenhDL_PS: HS-PDSCH
|
RB Identity |
tsc_RB25 (25) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_CCCH2 (2) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
|
RLC mode |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
|
MAC priority |
8 |
1 |
2 |
3 |
4 |
5 |
1 |
|
TrCH Type |
HS-DSCH |
HS-DSCH |
HS-DSCH |
HS-DSCH |
|||
|
TrCH identity / Mac-d Flow Id |
2 |
0 |
1 |
NA |
|||
|
PhyCh Type |
PDSCH |
||||||
|
PhyCH identity |
tsc_HSPDSCH (18) |
||||||
8.3.70 Configuration of Cell_FACH_2_SCCPCH_CTCHenhDL_PCH (Rel-8 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RAB tests.
The uplink configuration of Cell_FACH_2_SCCPCH_CTCH enhDL_PCH is the same as the uplink configuration of Cell_FACH_enhDL_PCH.
Table 8.3.70.1: Downlink configuration of Cell_FACH_2_SCCPCH_CTCHenhDL_PCH:
1st & 2nd S-CCPCH
|
RB Identity |
tsc_RB30 (30) |
|||
|
LogCh Type |
CTCH |
|||
|
LogCh Identity |
tsc_CTCH1 (11) |
|||
|
RLC mode |
UM |
UM |
TM |
TM |
|
MAC priority |
7 |
1 |
6 |
1 |
|
TrCH Type |
FACH |
FACH |
PCH |
|
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
|
|
PhyCh Type |
Secondary CCPCH |
Secondary CCPCH |
||
|
PhyCH identity |
tsc_S_CCPCH2 (10) |
tsc_S_CCPCH1 (5) |
||
Table 8.3.70.2: Downlink configuration of Cell_FACH_2_SCCPCH_CTCHenhDL_PCH: HS-PDSCH
|
RB Identity |
tsc_RB25 (25) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
PCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_CCCH2 (2) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
tsc_PCCH_FACH (11) |
|
RLC mode |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
TM |
|
MAC priority |
8 |
1 |
2 |
3 |
4 |
5 |
1 |
1 |
|
TrCH Type |
HS-DSCH |
HS-DSCH |
HS-DSCH |
HS-DSCH |
HS-DSCH |
|||
|
TrCH identity / Mac-d Flow Id |
2 |
0 |
1 |
NA |
NA |
|||
|
PhyCh Type |
PDSCH |
|||||||
|
PhyCH identity |
tsc_HSPDSCH (18) |
|||||||
8.3.71 Configuration of Cell_FACH_HS (rel-7 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 for downlink and 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1 for uplink. The configuration is applied to the RRC tests related in the states CELL_FACH, CELL_PCH and URA_PCH. They need a minimum radio configuration for testing.
Table 8.3.71.1: Uplink configuration of Cell_FACH_HS
|
RB Identity |
tsc_RB25 (25) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
|
LogCh Identity |
Tsc_UL_DTCH1 (7) |
tsc_UL_CCCH5 (5) |
tsc_UL_DCCH1 (1) |
tsc_UL_DCCH2 (2) |
tsc_UL_DCCH3 (3) |
tsc_UL_DCCH4 (4) |
|
RLC mode |
AM |
TM |
UM |
AM |
AM |
AM |
|
TrCH Type |
RACH |
|||||
|
TrCH identity |
tsc_RACH1 (15) |
|||||
|
PhyCh Type |
PRACH |
|||||
|
PhyCH identity |
tsc_PRACH1 (8) |
|||||
Table 8.3.71.2: Downlink configuration of Cell_FACH_HS
|
RB Identity |
tsc_RB25 (25) |
tsc_RB0 (0) |
tsc_RB1 (1) |
tsc_RB2 (2) |
tsc_RB3 (3) |
tsc_RB4 (4) |
tsc_RB_BCCH_FACH (-3) |
tsc_RB_PCCH (-2) |
|
LogCh Type |
DTCH |
CCCH |
DCCH |
DCCH |
DCCH |
DCCH |
BCCH |
PCCH |
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_CCCH5 (5) |
tsc_DL_DCCH1 (1) |
tsc_DL_DCCH2 (2) |
tsc_DL_DCCH3 (3) |
tsc_DL_DCCH4 (4) |
tsc_BCCH6 (6) |
tsc_PCCH1 (1) |
|
RLC mode |
AM |
UM |
UM |
AM |
AM |
AM |
TM |
TM |
|
MAC priority |
1 |
1 |
2 |
3 |
4 |
5 |
6 |
1 |
|
TrCH Type |
FACH |
FACH |
PCH |
|||||
|
TrCH identity |
tsc_FACH2 (14) |
tsc_FACH1 (13) |
tsc_PCH1 (12) |
|||||
|
PhyCh Type |
Secondary CCPCH |
|||||||
|
PhyCH identity |
tsc_S_CCPCH1 (5) |
|||||||
8.3.72 Configuration of Cell_E_HS_MAC_TM_dlSRB (Rel-9 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.11.4d. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [33], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to MAC(i/is) signalling tests in the DCH state where a PS RAB is setup for the interactive or background service class:
– 1 TM PS RAB on DTCH is mapped on E-DCH in uplink and HS-DSCH in downlink.
– Uplink SRBs on DCCH are mapped on E-DCH.
– Downlink SRBs on DCCH are mapped on DCH.
Table 8.3.72.1: Uplink configuration of Cell_E_HS_MAC_TM_dlSRB
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
TrCH Type |
E-DCH |
||
|
TrCH identity//Mac-d Flow Id |
2 |
1 |
|
|
PhyCh Type |
E-DPDCH |
PRACH |
|
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_PRACH1 (8) |
|
Table 8.3.72.2: Downlink configuration of Cell_E_HS_MAC_TM_dlSRB
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
MAC priority |
8 |
||
|
TrCH Type |
HS-DSCH |
||
|
TrCH identity /QueueID |
0 |
||
|
PhyCh Type |
PDSCH |
DPCH |
Secondary CCPCH |
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |
8.3.73 Configuration of Cell_E_HS_2TM (Rel-9 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.10.2.4.6.9 and 6.10.2.4.6.10. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to MAC(i/is) signalling tests in the DCH state where two PS RAB are setup for the interactive or background service class:
– 2 TM PS RAB on DTCH are mapped on E-DCH in uplink and HS-DSCH in downlink.
– SRBs on DCCH are mapped on E-DCH in uplink and HS-DSCH in downlink.
Table 8.3.73.1: Uplink configuration of Cell_E_HS_2TM
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
tsc_RB_DTCH_E_DCH_MAC2 (-22) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
tsc_UL_DTCH2 (8) |
||
|
RLC mode |
TM |
TM |
||
|
TrCH Type |
E-DCH |
|||
|
TrCH identity//Mac-d Flow Id |
2 |
3 |
1 |
|
|
PhyCh Type |
E-DPDCH |
PRACH |
||
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_PRACH1 (8) |
||
Table 8.3.73.2: Downlink configuration of Cell_E_HS_2TM
|
RB Identity |
tsc_RB_DTCH_E_DCH_MAC1 (-21) |
tsc_RB_DTCH_E_DCH_MAC2 (-22) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
|
LogCh Type |
DTCH |
DTCH |
|||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
tsc_DL_DTCH2 (8) |
|||
|
RLC mode |
TM |
TM |
|||
|
MAC priority |
8 |
8 |
|||
|
TrCH Type |
HS-DSCH |
||||
|
TrCH identity / Mac-d Flow Id |
0 |
2 |
1 |
||
|
PhyCh Type |
PDSCH |
Secondary CCPCH |
|||
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_S_CCPCH1 (5) |
|||
8.3.74 Configuration of Cell_DCH_E_HS_TM_RAB (Rel-11 or later)
The configuration is based on 3GPP TS 34.108 [3], clause 6.11.4c, with RAB configured in TM mode on SS side. The RB0/UM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.3.2.1.2 and RB0/TM-CCCH is referred to 3GPP TS 34.108 [3], clause 6.10.2.4.4.1.1.1.
The configuration is applied to RLC signalling tests in the DCH state where a PS RAB is setup for the interactive or background service class (A44 or A45):
– PS RAB on DTCH is mapped on E-DCH in uplink and HS-DSCH in downlink.
– Uplink SRBs on DCCH are mapped on DCH.
– Downlink SRBs on DCCH are mapped on DCH.
Table 8.3.74.1: Uplink configuration of Cell_E_HS_TM_RAB
|
RB Identity |
tsc_RB_AM_7_RLC (-12) |
Same as uplink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as uplink configuration of Cell_DCH_StandAloneSRB on PRACH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_UL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
TrCH Type |
E-DCH |
||
|
TrCH identity/Mac-d Flow Id |
2 |
||
|
PhyCh Type |
E-DPDCH |
DPDCH |
PRACH |
|
PhyCH identity |
tsc_E_DPCH (22) |
tsc_UL_DPCH1 (20) |
tsc_PRACH1 (8) |
Table 8.3.74.2: Downlink configuration of Cell_E_HS_TM_RAB
|
RB Identity |
tsc_RB_AM_7_RLC (-12) |
Same as downlink configuration of Cell_DCH_StandAloneSRB on DPCH |
Same as downlink configuration of Cell_DCH_StandAloneSRB on sCCPCH |
|
LogCh Type |
DTCH |
||
|
LogCh Identity |
tsc_DL_DTCH1 (7) |
||
|
RLC mode |
TM |
||
|
MAC priority |
8 |
||
|
TrCH Type |
HS-DSCH |
||
|
TrCH identity /QueueID |
0 |
||
|
PhyCh Type |
PDSCH |
DPCH |
Secondary CCPCH |
|
PhyCH identity |
tsc_HSPDSCH (18) |
tsc_DL_DPCH1 (26) |
tsc_S_CCPCH1 (5) |