8.11 DCH-DSCH Configurations

34.123-33GPPPart 3: Abstract test suite (ATS)TSUser Equipment (UE) conformance specification

The purpose of this clause is to specify the general ASP sequence and to precise values only when they have something specific in the given configuration.

1. Configure PDSCH physical channel

CPHY_RL_Setup_REQ(

physicalChannelIdentity,

pDSCHInfo)

— set up the scrambling code and transmission power level for the PDSCH identified by PhysicalChannelIdentity, and establishes the mapping between the spreading factor(and channelization codes) used for the PDSCH and TFCI(field2) transmitted in associated PDCH

2. Configure DSCH transport channels

CPHY_TrCH_Config_REQ(

physicalChannelIdentity,

dlconnectedTrCHList,

dlTFCS)

— set up TFS for each of DSCH’s carried by the PDSCH defined in step 1 and TFCS (will be presented in TFCI(field2) of PDCH configured in step 5) for the CCTrCH consisting of these DSCH’s

3. Configure MAC entity for DSCH

CMAC_Config_REQ(

physicalChannelIdentity,

uE_Info,

dlconnectedTrCHList,

dlTFCS)

— set up TFS, DSCH-RNTI and TFCS (which will be presented in TFCI(field2) of PDCH configured in step 5) for DSCH’s, and map logical channel to DSCH transport channel

4. Configure RLC entity for DTCHs

CRLC_Config_REQ(

physicalChannelIdentity,

rBInfo)

— set up RLC entity on top of DTCH logical channel which is mapped onto DSCH

5. Configure DPCH physical channel

CPHY_RL_Setup_REQ(

physicalChannelIdentity,

dPCHInfo)

6. Configure DCH transport channels

CPHY_TrCH_Config_REQ(

physicalChannelIdentity,

dlconnectedTrCHList,

dlTFCS)

— set up TFS for each DCH carried by the DPCH defined in step 5 and TFCS (TFCI(field1 and field2)) for the CCTrCH consisting of all DCH’s mapped on the DPCH.

7. Configure MAC entity for DCH

CMAC_Config_REQ(

physicalChannelIdentity,

dlconnectedTrCHList,

dlTFCS)

— set up TFS and TFCS (TFCI(field1) for DCH’s, and TFCI(field2) for associated DSCH), and map logical channel to DCH transport channel.

8. Configure RLC for DTCH, DCCH

CRLC_Config_REQ(

physicalChannelIdentity,

rBInfo)

— set up RLC entity on top of DTCH and DCCH logical channels which are mapped onto DCH