18.1.2 Combinations on DPCH
34.123-13GPPPart 1: Protocol conformance specificationRelease 15TSUser Equipment (UE) conformance specification
18.1.2.1 Stand-alone UL:1.7 DL:1.7 kbps SRBs for DCCH
Test to verify establishment and signalling of stand-alone signalling reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.1.
The test case is performed by running test case 9.4.1 (Location updating / accepted) using the stand-alone signalling reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.1.
18.1.2.2 Stand-alone UL:3.4 DL:3.4 kbps SRBs for DCCH
Test to verify establishment and signalling of stand-alone signalling reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.2.
The test case is performed by running test case 9.4.1 (Location updating / accepted) using the stand-alone signalling reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.2.
18.1.2.3 Stand-alone UL:13.6 DL:13.6 kbps SRBs for DCCH
Implicitly tested.
NOTE: The stand-alone UL:13.6 DL:13.6 kbps SRBs for DCCH in TS 34.108, clause 6.11.5.4.1.3 is the default signalling radio bearer used in the generic setup procedure as specified in TS 34.108 clause 7.
18.1.2.4 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.4.1 Conformance requirement
The UE shall be able to establish the UTRAN requested radio bearers within the UE’s signalled radio access capabilities.
The UE shall correctly transfer user data from peer to peer RLC entities according to the requested radio bearer configuration.
Reference(s)
3GPP TS 25.331, clause 8.2.1
3GPP TS 25.2xx series (Physical Layer)
3GPP TS 25.321 (MAC)
3GPP TS 25.322 (RLC)
18.1.2.4.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.4.
18.1.2.4.3 Method of test
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
DCCH |
|
|
TFS |
TF0, bits |
0x81(alt. 1×0) |
0x103 |
0x60 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (note) |
Test data size (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 39 bits RB6: 103 bits RB7: 60 bits |
RB5: 39 bits RB6: No data RB7: No data |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5 |
RB5: 81 bits RB6: 103 bits RB7: 60 bits |
RB5: 81 bits RB6: 103 bits RB7: 60 bits |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.4.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×39).
– for sub-test 2: RB5/TF2 (1×81); RB6/TF1 (1×103); and RB7/TF1 (1×60).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 or RB7.
– for sub-test 2: an RLC SDU on each of RB5, RB6 and RB7 having the same content as sent by SS
18.1.2.4a Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH(TDD)
18.1.2.4a.1 Definition and applicability
All UEs which support TDD.
18.1.2.4a.2 Conformance requirement
The UE shall be able to establish the UTRAN requested radio bearers within the UE’s signalled radio access capabilities.
The UE shall correctly transfer user data from peer to peer RLC entities according to the requested radio bearer configuration.
Reference(s)
3GPP TS 25.331, clause 8.2.1
3GPP TS 25.2xx series (Physical Layer)
3GPP TS 25.321 (MAC)
3GPP TS 25.322 (RLC)
18.1.2.4a.3 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.4.
18.1.2.4a.4 Method of test
Initial Condition
System Simulator: 2 cells – Cell 1 and 2 are active. Each cell configure 3 carriers, one is the primary carrier, the other two are secondary carrier.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
DCCH |
|
|
TFS |
TF0, bits |
0x81(alt. 1×0) |
0x103 |
0x60 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (note) |
Test data size (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 39 bits RB6: 103 bits RB7: 60 bits |
RB5: 39 bits RB6: No data RB7: No data |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5 |
RB5: 81 bits RB6: 103 bits RB7: 60 bits |
RB5: 81 bits RB6: 103 bits RB7: 60 bits |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.4a.5 Test requirements
See 18.1.1.1 for definition of step 10 and step 15. (establish the connection on the secondary carrier)
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×39).
– for sub-test 2: RB5/TF2 (1×81); RB6/TF1 (1×103); and RB7/TF1 (1×60).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 or RB7.
– for sub-test 2: an RLC SDU on each of RB5, RB6 and RB7 having the same content as sent by SS
18.1.2.5 Conversational / speech / UL:10.2 DL:10.2 kbps / CS RAB + UL:3.4 DL: 3.4 kbps SRBs for DCCH
18.1.2.5.1 Conformance requirement
See clause 18.1.2.4.1.
18.1.2.5.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.5.
18.1.2.5.3 Method of test
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
DCCH |
|
|
TFS |
TF0, bits |
0x65(alt. 1×0) |
0x99 |
0x40 |
0x148 |
|
TF1, bits |
1×39 |
1×99 |
1×40 |
1×148 |
|
|
TF2, bits |
1×65 |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7,DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x99 |
0x40 |
0x148 |
|
TF1, bits |
1×39 |
1×99 |
1×40 |
1×148 |
|
|
TF2, bits |
1×65 |
N/A |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (note) |
Test data size (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 39 bits RB6: 99 bits RB7: 40 bits |
RB5: 39 bits RB6: No data RB7: No data |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5 |
RB5: 65 bits RB6: 99 bits RB7: 40 bits |
RB5: 65 bits RB6: 99 bits RB7: 40 bits |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See clause 18.1.1.1 for test procedure.
18.1.2.5.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×39).
– for sub-test 2: RB5/TF2 (1×65); RB6/TF1 (1×99); and RB7/TF1 (1×40).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 or RB7.
– for sub-test 2: an RLC SDU on each of RB5, RB6 and RB7 having the same content as sent by SS.
18.1.2.6 Conversational / speech / UL:7.95 DL:7.95 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.6.1 Conformance requirement
See clause 18.1.2.4.1.
18.1.2.6.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.6.
18.1.2.6.3 Method of test
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
DCCH |
|
|
TFS |
TF0, bits |
0x75 (alt. 1×0) |
0x84 |
0x148 |
|
TF1, bits |
1×39 |
1×84 |
1×148 |
|
|
TF2, bits |
1×75 |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF1) |
|
UL_TFC4 |
(TF1, TF0, TF1) |
|
UL_TFC5 |
(TF2, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x84 |
0x148 |
|
TF1, bits |
1×39 |
1×84 |
1×148 |
|
|
TF2, bits |
1×75 |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF1) |
|
DL_TFC4 |
(TF1, TF0, TF1) |
|
DL_TFC5 |
(TF2, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (note) |
Test data size (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 39 bits RB6: 84 bits |
RB5: 39 bits RB6: No data |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, |
RB5: 75 bits RB6: 84 bits |
RB5: 75 bits RB6: 84 bits |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See clause 18.1.1.1 for test procedure.
18.1.2.6.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×39).
– for sub-test 2: RB5/TF2 (1×75) and RB6/TF1 (1×84).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 2: an RLC SDU on each of RB5 and RB6 having the same content as sent by SS.
18.1.2.7 Conversational / speech / UL:7.4 DL:7.4 kbps / CS RAB+ UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.7.1 Conformance requirement
See clause 18.1.2.4.1.
18.1.2.7.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.7.
18.1.2.7.3 Method of test
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
DCCH |
|
|
TFS |
TF0, bits |
0x61 (alt. 1×0) |
0x87 |
0x148 |
|
TF1, bits |
1×39 |
1×87 |
1×148 |
|
|
TF2, bits |
1×61 |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF1) |
|
UL_TFC4 |
(TF1, TF0, TF1) |
|
UL_TFC5 |
(TF2, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x87 |
0x148 |
|
TF1, bits |
1×39 |
1×87 |
1×148 |
|
|
TF2, bits |
1×61 |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF1) |
|
DL_TFC4 |
(TF1, TF0, TF1) |
|
DL_TFC5 |
(TF2, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (note) |
Test data size (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 39 bits RB6: 87 bits |
RB5: 39 bits RB6: No data |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, |
RB5: 61 bits RB6: 87 bits |
RB5: 61 bits RB6: 87 bits |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See clause 18.1.1.1 for test procedure.
18.1.2.7.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×39).
– for sub-test 2: RB5/TF2 (1×61) and RB6/TF1 (1×87).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 2: an RLC SDU on each of RB5 and RB6 having the same content as sent by SS
18.1.2.8 Conversational / speech / UL:6.7 DL:6.7 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.8.1 Conformance requirement
See clause 18.1.2.4.1.
18.1.2.8.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.8.
18.1.2.8.3 Method of test
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
DCCH |
|
|
TFS |
TF0, bits |
0x58 (alt. 1×0) |
0x76 |
0x148 |
|
TF1, bits |
1×39 |
1×76 |
1×148 |
|
|
TF2, bits |
1×58 |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF1) |
|
UL_TFC4 |
(TF1, TF0, TF1) |
|
UL_TFC5 |
(TF2, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x76 |
0x148 |
|
TF1, bits |
1×39 |
1×76 |
1×148 |
|
|
TF2, bits |
1×58 |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF1) |
|
DL_TFC4 |
(TF1, TF0, TF1) |
|
DL_TFC5 |
(TF2, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (note) |
Test data size (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 39 bits RB6: 76 bits |
RB5: 39 bits RB6: No data |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, |
RB5: 58 bits RB6: 76 bits |
RB5: 58 bits RB6: 76 bits |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See clause 18.1.1.1 for test procedure.
18.1.2.8.4 Test requirements
See clause 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×39).
– for sub-test 2: RB5/TF2 (1×58) and RB6/TF1 (1×76).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 2: an RLC SDU on each of RB5 and RB6 having the same content as sent by SS
18.1.2.9 Conversational / speech / UL:5.9 DL:5.9 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.9.1 Conformance requirement
See clause 18.1.2.4.1.
18.1.2.9.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.9.
18.1.2.9.3 Method of test
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
DCCH |
|
|
TFS |
TF0, bits |
0x55 (alt. 1×0) |
0x63 |
0x148 |
|
TF1, bits |
1×39 |
1×63 |
1×148 |
|
|
TF2, bits |
1×55 |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF1) |
|
UL_TFC4 |
(TF1, TF0, TF1) |
|
UL_TFC5 |
(TF2, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x63 |
0x148 |
|
TF1, bits |
1×39 |
1×63 |
1×148 |
|
|
TF2, bits |
1×55 |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF1) |
|
DL_TFC4 |
(TF1, TF0, TF1) |
|
DL_TFC5 |
(TF2, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (note) |
Test data size (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 39 bits RB6: 63 bits |
RB5: 39 bits RB6: No data |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, |
RB5: 55 bits RB6: 63 bits |
RB5: 55 bits RB6: 63 bits |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See clause 18.1.1.1.1 for test procedure.
18.1.2.9.4 Test requirements
See 18.1.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×39).
– for sub-test 2: RB5/TF2 (1×55) and RB6/TF1 (1×63).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 2: an RLC SDU on each of RB5 and RB6 having the same content as sent by SS
18.1.2.10 Conversational / speech / UL:5.15 DL:5.15 kbps / CS RAB + UL:1.7 DL:1.7 kbps SRBs for DCCH
18.1.2.10.1 Conformance requirement
See clause 18.1.2.4.1.
18.1.2.10.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.10.
18.1.2.10.3 Method of test
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
DCCH |
|
|
TFS |
TF0, bits |
0x49 (alt. 1×0) |
0x54 |
0x148 |
|
TF1, bits |
1×39 |
1×54 |
1×148 |
|
|
TF2, bits |
1×49 |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF1) |
|
UL_TFC4 |
(TF1, TF0, TF1) |
|
UL_TFC5 |
(TF2, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x54 |
0x148 |
|
TF1, bits |
1×39 |
1×54 |
1×148 |
|
|
TF2, bits |
1×49 |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF1) |
|
DL_TFC4 |
(TF1, TF0, TF1) |
|
DL_TFC5 |
(TF2, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (note) |
Test data size (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 39 bits RB6: 54 bits |
RB5: 39 bits RB6: No data |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, |
RB5: 49 bits RB6: 54 bits |
RB5: 49 bits RB6: 54 bits |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See clause 18.1.1.1 for test procedure.
18.1.2.10.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×39).
– for sub-test 2: RB5/TF2 (1×49) and RB6/TF1 (1×54).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 2: an RLC SDU on each of RB5 and RB6 having the same content as sent by SS
18.1.2.11 Conversational / speech / UL:4.75 DL:4.75 kbps / CS RAB + UL:1.7 DL:1.7 kbps SRBs for DCCH
18.1.2.11.1 Conformance requirement
See clause 18.1.2.4.1.
18.1.2.11.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.11.
18.1.2.11.3 Method of test
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
DCCH |
|
|
TFS |
TF0, bits |
0x49 (alt. 1×0) |
0x53 |
0x148 |
|
TF1, bits |
1×39 |
1×53 |
1×148 |
|
|
TF2, bits |
1×42 |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF1) |
|
UL_TFC4 |
(TF1, TF0, TF1) |
|
UL_TFC5 |
(TF2, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x53 |
0x148 |
|
TF1, bits |
1×39 |
1×53 |
1×148 |
|
|
TF2, bits |
1×42 |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF1) |
|
DL_TFC4 |
(TF1, TF0, TF1) |
|
DL_TFC5 |
(TF2, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (note) |
Test data size (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 39 bits RB6: 53 bits |
RB5: 39 bits RB6: No data |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, |
RB5: 42 bits RB6: 53 bits |
RB5: 42 bits RB6: 53 bits |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See clause 18.1.1.1 for test procedure.
18.1.2.11.4 Test requirements
See clause 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×39).
– for sub-test 2: RB5/TF2 (1×42) and RB6/TF1 (1×53).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 2: an RLC SDU on each of RB5 and RB6 having the same content as sent by SS
18.1.2.12 Conversational / unknown / UL:28.8 DL:28.8 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.12.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.12.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.12.
18.1.2.12.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS:
|
Uplink RLC |
|
|
TM RLC |
|
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Segmentation indication |
FALSE |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: ‘Timer based discard without explicit signalling’ is configured in uplink to secure that the UE will be able to return data in uplink for the case when the UE test loop function, due to processing delays, will not deliver the SDUs in one and the same TTI, but instead in two subsequent TTIs. |
|
Uplink TFS:
|
TFI |
RB5 (28.8 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x576 |
0x148 |
|
TF1, bits |
1×576 |
1×148 |
|
|
TF2, bits |
2×576 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF0, TF1) |
|
UL_TFC4 |
(TF1, TF1) |
|
UL_TFC5 |
(TF2, TF1) |
Downlink TFS:
|
RB5 (28.8 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
0x576 |
0x148 |
|
TF1, bits |
1×576 |
1×148 |
|
|
TF2, bits |
2×576 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF0, TF1) |
|
DL_TFC4 |
(TF1, TF1) |
|
DL_TFC5 |
(TF2, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 576 |
RB5: 576 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, |
RB5: 576 |
RB5: 2×576 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See clause 18.1.1.1 for test procedure.
18.1.2.12.4 Test requirements
See clause 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×576).
– for sub-test 2: RB5/TF2 (2×576).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS.
- for sub-test 2: two RLC SDUs on RB5 having the same content as sent by SS.
18.1.2.13 Conversational / unknown / UL:64 DL:64 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.13.1 Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 20 ms TTI
18.1.2.13.1.1 Conformance requirement
See clause 18.1.2.4.1.
18.1.2.13.1.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.13 for the 20 ms TTI case.
18.1.2.13.1.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS:
|
Uplink RLC |
|
|
TM RLC |
|
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Segmentation indication |
FALSE |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x148 |
|
TF1, bits |
2×640 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF0, TF1) |
|
UL_TFC3 |
(TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x148 |
|
TF1, bits |
2×640 |
1×148 |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF0, TF1) |
|
DL_TFC3 |
(TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 640 |
RB5: 2×640 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See clause 18.1.1.1 for test procedure.
18.1.2.13.1.4 Test requirements
See clause 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (2×640).
3. At step 15 the UE shall return
– for sub-test 1: two RLC SDUs on RB5 having the same content as sent by SS.
18.1.2.13.1a Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 20 ms TTI(TDD)
18.1.2.13.1a.1 Definition and applicability
All UEs which support TDD.
18.1.2.13.1a.2 Conformance requirement
See clause 18.1.2.4.1.
18.1.2.13.1a.3 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.13 for the 20 ms TTI case.
18.1.2.13.1a.4 Method of test
Initial Conditions
System Simulator: 2 cells – Cell 1 and 2 are active. Each cell configure 3 carriers, one is the primary carrier, the other two are secondary carrier.
The following RLC Info parameter values shall be set by the SS:
|
Uplink RLC |
|
|
TM RLC |
|
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Segmentation indication |
FALSE |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI. |
|
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x148 |
|
TF1, bits |
2×640 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF0, TF1) |
|
UL_TFC3 |
(TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x148 |
|
TF1, bits |
2×640 |
1×148 |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF0, TF1) |
|
DL_TFC3 |
(TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 640 |
RB5: 2×640 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See clause 18.1.1.1 for test procedure.
18.1.2.13.1a.5 Test requirements
See clause 18.1.1.1 for definition of step 10 and step 15 (establish the connection on the secondary carrier).
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (2×640).
3. At step 15 the UE shall return
– for sub-test 1: two RLC SDUs on RB5 having the same content as sent by SS.
18.1.2.13.2 Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 40 ms TTI
18.1.2.13.2.1 Conformance requirement
See clause 18.1.2.4.1.
18.1.2.13.2.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.13 for the 40 ms TTI case.
18.1.2.13.2.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS:
|
Uplink RLC |
|
|
TM RLC |
|
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Segmentation indication |
FALSE |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x148 |
|
TF1, bits |
4×640 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF0, TF1) |
|
UL_TFC3 |
(TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x148 |
|
TF1, bits |
4×640 |
1×148 |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF0, TF1) |
|
DL_TFC3 |
(TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 640 |
RB5: 4×640 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.13.2.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (4×640).
3. At step 15 the UE shall return
– for sub-test 1: four RLC SDUs on RB5 having the same content as sent by SS.
18.1.2.14 Conversational / unknown / UL:32 DL:32 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.14.1 Conversational / unknown / UL:32 DL:32 kbps / CS RAB / 20 ms TTI
18.1.2.14.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.14.1.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.14 for the 20 ms TTI case.
18.1.2.14.1.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS:
|
Uplink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
Uplink TFS:
|
TFI |
RB5 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x148 |
|
TF1, bits |
1×640 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF0, TF1) |
|
UL_TFC3 |
(TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x148 |
|
TF1, bits |
1×640 |
1×148 |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF0, TF1) |
|
DL_TFC3 |
(TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 640 |
RB5: 640 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.14.1.4 Test requirements
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×640).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS.
18.1.2.14.2 Conversational / unknown / UL:32 DL:32 kbps / CS RAB / 40 ms TTI
18.1.2.14.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.14.2.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.14 for the 40 ms TTI case.
18.1.2.14.2.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS:
|
Uplink RLC |
|
|
TM RLC |
|
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Segmentation indication |
FALSE |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
Uplink TFS:
|
TFI |
RB5 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x148 |
|
TF1, bits |
2×640 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF0, TF1) |
|
UL_TFC3 |
(TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x148 |
|
TF1, bits |
2×640 |
1×148 |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF0, TF1) |
|
DL_TFC3 |
(TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 640 |
RB5: 2×640 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.14.2.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (2×640).
3. At step 15 the UE shall return
– for sub-test 1: two RLC SDUs on RB5 having the same content as sent by SS.
18.1.2.15 Streaming / unknown / UL:14.4/DL:14.4 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.15.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.15.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.15.
18.1.2.15.3 Method of test
Uplink TFS:
|
TFI |
RB5 (14.4 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x576 |
0x148 |
|
TF1, bits |
1×576 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF0, TF1) |
|
UL_TFC3 |
(TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (14.4 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x576 |
0x148 |
|
TF1, bits |
1×576 |
1×148 |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF0, TF1) |
|
DL_TFC3 |
(TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 576 |
RB5: 576 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.15.4 Test requirements
See 18,1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×576).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS.
18.1.2.16 Streaming / unknown / UL:28.8/DL:28.8 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.16.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.16.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.16.
18.1.2.16.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS:
|
Uplink RLC |
|
|
TM RLC |
|
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Segmentation indication |
FALSE |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
Uplink TFS:
|
TFI |
RB5 (28.8 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x576 |
0x148 |
|
TF1, bits |
1×576 |
1×148 |
|
|
TF2, bits |
2×576 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF0, TF1) |
|
UL_TFC4 |
(TF1, TF1) |
|
UL_TFC5 |
(TF2, TF1) |
Downlink TFS:
|
RB5 (28.8 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
0x576 |
0x148 |
|
TF1, bits |
1×576 |
1×148 |
|
|
TF2, bits |
2×576 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF0, TF1) |
|
DL_TFC4 |
(TF1, TF1) |
|
DL_TFC5 |
(TF2, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 576 |
RB5: 576 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, |
RB5: 576 |
RB5: 2×576 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.16.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×576).
– for sub-test 2: RB5/TF2 (2×576).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS.
– for sub-test 2: two RLC SDU on RB5 having the same content as sent by SS.
18.1.2.17 Streaming / unknown / UL:57.6/DL:57.6 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.17.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.17.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TSÂ 34.108, clause 6.11.5.4.1.17.
18.1.2.17.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS:
|
Uplink RLC |
|
|
TM RLC |
|
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Segmentation indication |
FALSE |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
Uplink TFS:
|
TFI |
RB5 (57.6 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x576 |
0x148 |
|
TF1, bits |
1×576 |
1×148 |
|
|
TF2, bits |
2×576 |
N/A |
|
|
TF3, bits |
3×576 |
N/A |
|
|
TF4, bits |
4×576 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (57.6 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x576 |
0x148 |
|
TF1, bits |
1×576 |
1×148 |
|
|
TF2, bits |
2×576 |
N/A |
|
|
TF3, bits |
3×576 |
N/A |
|
|
TF4, bits |
4×576 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF0, TF1) |
|
DL_TFC6 |
(TF1, TF1) |
|
DL_TFC7 |
(TF2, TF1) |
|
DL_TFC8 |
(TF3, TF1) |
|
DL_TFC9 |
(TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5, |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 576 |
RB5: 576 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 576 |
RB5: 2×576 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 576 |
RB5: 3×576 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 576 |
RB5: 4×576 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.17.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×576).
– for sub-test 2: RB5/TF2 (2×576).
– for sub-test 3: RB5/TF3 (3×576).
– for sub-test 4: RB5/TF4 (4×576).
3. At step 15 the UE shall return
– for sub-test 1: one RLC SDU on RB5 having the same content as sent by SS.
– for sub-test 2: two RLC SDU on RB5 having the same content as sent by SS.
– for sub-test 3: three RLC SDU on RB5 having the same content as sent by SS.
– for sub-test 4: four RLC SDU on RB5 having the same content as sent by SS.
18.1.2.18 Streaming / unknown / UL:0 DL:64 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.18.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.18.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.18.
To be able to test the downlink radio bearer using the UE loopback function for the reference radio bearer UL:0 DL: 64 kbps, the reference radio bearer configuration according to TS 34.108, clause 6.11.5.4.1.15.1 (Streaming/unknown/UL:14.4 kbps) is used in uplink.
18.1.2.18.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS:
|
Uplink RLC |
|
|
TM RLC |
|
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Segmentation indication |
FALSE |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
Uplink TFS:
|
TFI |
RB5 (14.4 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x576 |
0x148 |
|
TF1, bits |
1×576 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF0, TF1) |
|
UL_TFC3 |
(TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x320 |
0x148 |
|
TF1, bits |
1×320 |
1×148 |
|
|
TF2, bits |
2×320 |
N/A |
|
|
TF3, bits |
4×320 |
N/A |
|
|
TF4, bits |
8×320 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF0, TF1) |
|
DL_TFC6 |
(TF1, TF1) |
|
DL_TFC7 |
(TF2, TF1) |
|
DL_TFC8 |
(TF3, TF1) |
|
DL_TFC9 |
(TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note 1) |
Test data size (bits) (note 1) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 576 |
RB5: 320 |
|
2 |
DL_TFC2 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 576 |
RB5: 2×320 |
|
3 |
DL_TFC3 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 576 |
RB5: 4×320 |
|
4 |
DL_TFC4 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 576 |
RB5: 8×320 |
|
NOTE 1: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.18.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 where the first 320 bits have the same content as the RLC SDU sent by the SS.
– for sub-test 2 to 4: one or more RLC SDUs on RB5 where the first 320 bits have the same content as the RLC SDU sent by the SS.
18.1.2.19 Streaming / unknown / UL:64 DL:0 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.19.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.19.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.19.
To be able to test the uplink radio bearer using the UE loopback function for the reference radio bearer UL:64 DL: 0 kbps, the reference radio bearer configuration according to TS 34.108, clause 6.11.5.4.1.15.2 (Streaming/unknown/DL:14.4 kbps) is used in downlink.
18.1.2.19.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS:
|
Uplink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
TRUE |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
TRUE |
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x320 |
0x148 |
|
TF1, bits |
1×320 |
1×148 |
|
|
TF2, bits |
2×320 |
N/A |
|
|
TF3, bits |
4×320 |
N/A |
|
|
TF4, bits |
8×320 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (14.4 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x576 |
0x148 |
|
TF1, bits |
1×576 |
1×148 |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF0, TF1) |
|
DL_TFC3 |
(TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note 1) |
Test data size (bits) (note 1) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 320 |
RB5: 576 (note 2) |
|
2 |
DL_TFC1 |
UL_TFC2 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 640 |
RB5: 576 (note 3) |
|
3 |
DL_TFC1 |
UL_TFC3 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 1280 |
RB5: 576 (note 4) |
|
4 |
DL_TFC1 |
UL_TFC4 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 2560 |
RB5: 576 (note 5) |
|
NOTE 1: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. NOTE 2: SS is using a DL RLC SDU with 576 bits as test data (=DL RLC PDU size for DL/TF1). UE will return the first 320 bits of the test data. NOTE 3: SS is using a DL RLC SDU size of 576 bits as test data (=DL RLC PDU size for DL/TF1). UE will return an RLC SDU repeating the received DL RLC SDU two times (truncating the last one to fit the UL RLC SDU size of 640 bits). NOTE 4: SS is using a DL RLC SDU size of 576 bits as test data (=DL RLC PDU size for DL/TF1). UE will return an RLC SDU repeating the received DL RLC SDU three times (truncating the last one to fit the UL RLC SDU size of 1280 bits). NOTE 5: SS is using a DL RLC SDU size of 576 bits as test data (=DL RLC PDU size for DL/TF1). UE will return an RLC SDU repeating the received DL RLC SDU five times (truncating the last one to fit the UL RLC SDU size of 2560 bits). |
||||||
See 18.1.1.1 for test procedure.
18.1.2.19.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×320).
– for sub-test 2: RB5/TF2 (2×320).
– for sub-test 3: RB5/TF3 (4×320).
– for sub-test 4: RB5/TF4 (8×320).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as the first 320 bits of the DL RLC SDU sent by the SS.
– for sub-test 2: an RLC SDU on RB5 for which the first 576 bits are equal to the sent DL RLC SDU bit pattern and the remaining 64 bits are equal to the first 64 bits of the sent DL RLC SDU.
– for sub-test 3: an RLC SDU on RB5 for which the first 1152 bits are equal to the sent DL RLC SDU bit pattern repeated twice and the remaining 128 bits are equal to the first 128 bits of the sent DL RLC SDU.
– for sub-test 4: an RLC SDU on RB5 for which the first 2304 bits are equal to the sent DL RLC SDU bit pattern repeated four times and the remaining 256 bits are equal to the first 256 of the sent DL RLC SDU.
18.1.2.20 Void
18.1.2.21 Void
18.1.2.22 Void
18.1.2.23 Interactive or background / UL:32 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.23.1 Interactive or background / UL:32 DL:8 kbps / PS RAB / (TC,10 ms TTI)
18.1.2.23.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.23.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.23 for the turbo channel coding and uplink 10 ms TTI case.
18.1.2.23.1.3 Method of test
Uplink TFS:
|
TFI |
RB5 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF0, TF1) |
|
UL_TFC3 |
(TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (8 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF0, TF1) |
|
DL_TFC3 |
(TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 312 |
RB5: 312 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.23.1.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.23.2 Interactive or background / UL:32 DL:8 kbps / PS RAB / (TC, 20 ms TTI)
18.1.2.23.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.23.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.23 for the turbo channel coding and uplink 20 ms TTI case.
18.1.2.23.2.3 Method of test
Uplink TFS:
|
TFI |
RB5 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF0, TF1) |
|
UL_TFC4 |
(TF1, TF1) |
|
UL_TFC5 |
(TF2, TF1) |
Downlink TFS:
|
TFI |
RB5 (8 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF0, TF1) |
|
DL_TFC3 |
(TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC1 |
UL_TFC2 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5 |
RB5: 632 |
RB5: 632 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.23.2.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
3. At step 15 the UE shall return
– for sub-test 1 and 2: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.23.3 Interactive or background / UL:32 DL:8 kbps / PS RAB / (CC, 10 ms TTI)
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.23 for the convolutional channel coding and uplink 10 ms TTI case.
See test case 18.1.2.23.1 for test procedure and test requirement.
18.1.2.23.4 Interactive or background / UL:32 DL:8 kbps / PS RAB / (CC, 20 ms TTI)
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.23 for the convolutional channel coding and uplink 20 ms TTI case.
See test case 18.1.2.23.2 for test procedure and test requirement.
18.1.2.24 Interactive or background / UL:64 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.24.1 Interactive or background / UL:64 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH / TC
18.1.2.24.1.1 Conformance requirement
See 18.1.2.4.1.1.
18.1.2.24.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.24 for the downlink turbo coding case.
18.1.2.24.1.3 Method of test
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (8 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF0, TF1) |
|
DL_TFC3 |
(TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC1 |
UL_TFC2 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC1 |
UL_TFC3 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 952 |
RB5: 952 |
|
4 |
DL_TFC1 |
UL_TFC4 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 1272 |
RB5: 1272 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.24.1.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (3×336).
– for sub-test 4: RB5/TF4 (4×336).
3. At step 15 the UE shall return
– for sub-test 1 to 4: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.24.2 Interactive or background / UL:64 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH / CC
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.24 for the downlink convolutional channel coding case.
See test case 18.1.2.24.1 for test procedure and test requirement.
18.1.2.25 Interactive or background / UL:32 DL: 64 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.25.1 Interactive or background / UL:32 DL: 64 kbps / PS RAB / (TC, 10 ms TTI)
18.1.2.25.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.25.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.25 for the uplink turbo channel coding and 10 ms TTI case.
18.1.2.25.1.3 Method of test
Uplink TFS:
|
TFI |
RB5 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF0, TF1) |
|
UL_TFC3 |
(TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF0, TF1) |
|
DL_TFC6 |
(TF1, TF1) |
|
DL_TFC7 |
(TF2, TF1) |
|
DL_TFC8 |
(TF3, TF1) |
|
DL_TFC9 |
(TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 952 |
RB5: 952 |
|
4 |
DL_TFC4 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 1272 |
RB5: 1272 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.25.1.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1 to 4: RB5/TF1 (1×336).
3. At step 15 the UE shall return
– for sub-test 1 to 4: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.25.2 Interactive or background / UL:32 DL: 64 kbps / PS RAB / (TC, 20 ms TTI)
18.1.2.25.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.25.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.25 for the uplink turbo channel coding and 20 ms TTI case.
18.1.2.25.2.3 Method of test
Uplink TFS:
|
TFI |
RB5 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF0, TF1) |
|
UL_TFC4 |
(TF1, TF1) |
|
UL_TFC5 |
(TF2, TF1) |
Downlink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF0, TF1) |
|
DL_TFC6 |
(TF1, TF1) |
|
DL_TFC7 |
(TF2, TF1) |
|
DL_TFC8 |
(TF3, TF1) |
|
DL_TFC9 |
(TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 952 |
RB5: 952 |
|
4 |
DL_TFC4 |
UL_TFC2 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5 |
RB5: 1272 |
RB5: 1272 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.25.2.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF1 (1×336).
– for sub-test 4: RB5/TF2 (2×336).
3. At step 15 the UE shall return
– for sub-test 1 to 4: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.25.3 Interactive or background / UL:32 DL:64 kbps / PS RAB / (CC, 10 ms TTI)
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.25 for the uplink convolutional channel coding and 10 ms TTI case.
See test case 18.1.2.25.1 for test procedure and test requirement.
18.1.2.25.4 Interactive or background / UL:32 DL:64 kbps / PS RAB / (CC, 20 ms TTI)
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.25 for the uplink convolutional channel coding and 20 ms TTI case.
See test case 18.1.2.25.2 for test procedure and test requirement.
18.1.2.26 Interactive or background / UL:64 DL: 64 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.26.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.26.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.26.
18.1.2.26.3 Method of test
Uplink TFS:
|
TFI |
RB5 (64 kbps, 20 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (64 kbps, 20 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF0, TF1) |
|
DL_TFC6 |
(TF1, TF1) |
|
DL_TFC7 |
(TF2, TF1) |
|
DL_TFC8 |
(TF3, TF1) |
|
DL_TFC9 |
(TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 952 |
RB5: 952 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 1272 |
RB5: 1272 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.26.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (3×336).
– for sub-test 4: RB5/TF4 (4×336).
3. At step 15 the UE shall return
– for sub-test 1 to 4: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.27 Interactive or background / UL:64 DL:128 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.27.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.27.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.27.
18.1.2.27.3 Method of test
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF0, TF1) |
|
DL_TFC6 |
(TF1, TF1) |
|
DL_TFC7 |
(TF2, TF1) |
|
DL_TFC8 |
(TF3, TF1) |
|
DL_TFC9 |
(TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 1912 |
RB5: 1272 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 2552 |
RB5: 2552 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.27.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (3×336).
– for sub-test 4: RB5/TF4 (4×336).
3. At step 15 the UE shall return
– for sub-test 1, 2 and 4: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
– for sub-test 3: an RLC SDU on RB5 having the first 1272 bits equal to the content of the test data sent by the SS in downlink.
18.1.2.28 Interactive or background / UL:128 DL:128 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.28.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.28.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.28.
18.1.2.28.3 Method of test
Uplink TFS:
|
TFI |
RB5 (128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF0, TF1) |
|
DL_TFC6 |
(TF1, TF1) |
|
DL_TFC7 |
(TF2, TF1) |
|
DL_TFC8 |
(TF3, TF1) |
|
DL_TFC9 |
(TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 1272 |
RB5: 1272 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 2552 |
RB5: 2552 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.28.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (4×336).
– for sub-test 4: RB5/TF4 (8×336).
3. At step 15 the UE shall return
– for sub-test 1 to 4: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.29 Interactive or background / UL:64 DL:144 kbps / PS RAB + UL:3.4 DL: 3.4 kbps SRBs for DCCH
18.1.2.29.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.29.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.29.
18.1.2.29.3 Method of test
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (144 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
|
|
TF5, bits |
9×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF0, TF1) |
|
DL_TFC7 |
(TF1, TF1) |
|
DL_TFC8 |
(TF2, TF1) |
|
DL_TFC9 |
(TF3, TF1) |
|
DL_TFC10 |
(TF4, TF1) |
|
DL_TFC11 |
(TF5, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 1912 |
RB5: 1272 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 2552 |
RB5: 2552 |
|
5 |
DL_TFC5 |
UL_TFC3 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 2872 |
RB5: 2872 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.29.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (4×336).
– for sub-test 4: RB5/TF4 (8×336).
– for sub-test 5: RB5/TF3 (4×336).
3. At step 15 the UE shall return
– for sub-test 1, 2, 4 and 5: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
– for sub-test 3: an RLC SDU on RB5 having the first 1272 bits equal to the content of the test data sent by the SS in downlink.
18.1.2.30 Interactive or background / UL:144 DL:144 kbps / PS RAB + UL:3.4 DL: 3.4 kbps SRBs for DCCH
18.1.2.30.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.30.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.30.
18.1.2.30.3 Method of test
Uplink TFS:
|
TFI |
RB5 (144 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
|
|
TF5, bits |
9×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF5, TF0) |
|
UL_TFC6 |
(TF0, TF1) |
|
UL_TFC7 |
(TF1, TF1) |
|
UL_TFC8 |
(TF2, TF1) |
|
UL_TFC9 |
(TF3, TF1) |
|
UL_TFC10 |
(TF4, TF1) |
|
UL_TFC11 |
(TF5, TF1) |
Downlink TFS:
|
TFI |
RB5 (144 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
|
|
TF5, bits |
9×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF0, TF1) |
|
DL_TFC7 |
(TF1, TF1) |
|
DL_TFC8 |
(TF2, TF1) |
|
DL_TFC9 |
(TF3, TF1) |
|
DL_TFC10 |
(TF4, TF1) |
|
DL_TFC11 |
(TF5, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 1272 |
RB5: 1272 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC4, UL_TFC6, UL_TFC10 |
RB5: 2552 |
RB5: 2552 |
|
5 |
DL_TFC5 |
UL_TFC5 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC5, UL_TFC6, UL_TFC11 |
RB5: 2872 |
RB5: 2872 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.30.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (4×336).
– for sub-test 4: RB5/TF4 (8×336).
– for sub-test 5: RB5/TF5 (9×336).
3. At step 15 the UE shall return
– for sub-test 1 to 5: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.31 Interactive or background / UL:64 DL:256 kbps / PS RAB + UL:3.4 DL: 3.4 kbps SRBs for DCCH
18.1.2.31.1 Interactive or background / UL:64 DL:256 kbps / PS RAB + UL:3.4 DL: 3.4 kbps SRBs for DCCH/ 10 ms TTI
18.1.2.31.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.31.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.31 for the downlink 10 ms TTI case.
18.1.2.31.1.3 Method of test
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (256 kbps, 10ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF0, TF1) |
|
DL_TFC6 |
(TF1, TF1) |
|
DL_TFC7 |
(TF2, TF1) |
|
DL_TFC8 |
(TF3, TF1) |
|
DL_TFC9 |
(TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 1912 |
RB5: 1272 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 2552 |
RB5: 2552 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.31.1.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (3×336).
– for sub-test 4: RB5/TF4 (4×336).
3. At step 15 the UE shall return
– for sub-test 1, 2 and 4: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
– for sub-test 3: an RLC SDU on RB5 having the first 1272 bits equal to the content of the test data sent by the SS in downlink.
18.1.2.31.2 Interactive or background / UL:64 DL:256 kbps / PS RAB / 20 ms TTI
18.1.2.31.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.31.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.31 for the downlink 20 ms TTI case.
18.1.2.31.2.3 Method of test
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (256 kbps, 20ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
|
|
TF5, bits |
12×336 |
N/A |
|
|
TF6, bits |
16×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF6, TF0) |
|
DL_TFC7 |
(TF0, TF1) |
|
DL_TFC8 |
(TF1, TF1) |
|
DL_TFC9 |
(TF2, TF1) |
|
DL_TFC10 |
(TF3, TF1) |
|
DL_TFC11 |
(TF4, TF1) |
|
DL_TFC12 |
(TF5, TF1) |
|
DL_TFC13 |
(TF6, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC7, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC7, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC7, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 1912 |
RB5: 1272 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC7, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 2552 |
RB5: 2552 |
|
5 |
DL_TFC5 |
UL_TFC4 |
DL_TFC0, DL_TFC7, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 3832 |
RB5: 3832 |
|
6 |
DL_TFC6 |
UL_TFC4 |
DL_TFC0, DL_TFC7, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 5112 |
RB5: 5112 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.31.2.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (3×336).
– for sub-test 4 to 6: RB5/TF4 (4×336).
3. At step 15 the UE shall return
– for sub-test 1 to 6: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.32 Interactive or background / UL:64 DL:384 kbps / PS RAB + UL:3.4 DL: 3.4 kbps SRBs for DCCH
18.1.2.32.1 Interactive or background / UL:64 DL:384 kbps / PS RAB / 10 ms TTI
18.1.2.32.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.32.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.32 for the 10 ms TTI case.
18.1.2.32.1.3 Method of test
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (384 kbps, 10ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
|
|
TF5, bits |
12×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF0, TF1) |
|
DL_TFC7 |
(TF1, TF1) |
|
DL_TFC8 |
(TF2, TF1) |
|
DL_TFC9 |
(TF3, TF1) |
|
DL_TFC10 |
(TF4, TF1) |
|
DL_TFC11 |
(TF5, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 1912 |
RB5: 1272 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 2552 |
RB5: 2552 |
|
5 |
DL_TFC5 |
UL_TFC4 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 3832 |
RB5: 3832 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.32.1.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (3×336).
– for sub-test 4 and 5: RB5/TF4 (4×336).
3. At step 15 the UE shall return
– for sub-test 1, 2, 4 and 5: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
– for sub-test 3: an RLC SDU on RB5 having the first 1272 bits equal to the content of the test data sent by the SS in downlink.
18.1.2.32.2 Interactive or background / UL:64 DL:384 kbps / PS RAB / 20 ms TTI
18.1.2.32.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.32.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.32 for the 20 ms TTI case.
18.1.2.32.2.3 Method of test
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (384 kbps, 20ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
|
|
TF5, bits |
12×336 |
N/A |
|
|
TF6, bits |
16×336 |
N/A |
|
|
TF7, bits |
20×336 |
N/A |
|
|
TF8, bits |
24×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF6, TF0) |
|
DL_TFC7 |
(TF7, TF0) |
|
DL_TFC8 |
(TF8, TF0) |
|
DL_TFC9 |
(TF0, TF1) |
|
DL_TFC10 |
(TF1, TF1) |
|
DL_TFC11 |
(TF2, TF1) |
|
DL_TFC12 |
(TF3, TF1) |
|
DL_TFC13 |
(TF4, TF1) |
|
DL_TFC14 |
(TF5, TF1) |
|
DL_TFC15 |
(TF6, TF1) |
|
DL_TFC16 |
(TF7, TF1) |
|
DL_TFC17 |
(TF8, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 1912 |
RB5: 1272 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 2552 |
RB5: 2552 |
|
5 |
DL_TFC5 |
UL_TFC4 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 3832 |
RB5: 3832 |
|
6 |
DL_TFC6 |
UL_TFC4 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 5112 |
RB5: 5112 |
|
7 |
DL_TFC7 |
UL_TFC4 |
DL_TFC0, DL_TFC9, , UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 6392 |
RB5: 6392 |
|
8 |
DL_TFC8 |
UL_TFC4 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 7672 |
RB5: 7672 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.32.2.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (3×336).
– for sub-test 4 to 8: RB5/TF4 (4×336).
3. At step 15 the UE shall return
– for sub-test 1 to 8: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.33 Interactive or background / UL:128 DL:384 kbps / PS RAB + UL:3.4 DL: 3.4 kbps SRBs for DCCH
18.1.2.33.1 Interactive or background / UL:128 DL:384 kbps / PS RAB / 10 ms TTI
18.1.2.33.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.33.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.33 for the 10 ms TTI case.
18.1.2.33.1.3 Method of test
Uplink TFS:
|
TFI |
RB5 (128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF0, TF1) |
|
UL_TFC5 |
(TF1, TF1) |
|
UL_TFC6 |
(TF2, TF1) |
|
UL_TFC7 |
(TF3, TF1) |
Downlink TFS:
|
TFI |
RB5 (384 kbps, 10ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
|
|
TF5, bits |
12×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF0, TF1) |
|
DL_TFC7 |
(TF1, TF1) |
|
DL_TFC8 |
(TF2, TF1) |
|
DL_TFC9 |
(TF3, TF1) |
|
DL_TFC10 |
(TF4, TF1) |
|
DL_TFC11 |
(TF5, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (Note) |
Test data size (bits) (Note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC4, UL_TFC5 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC2, UL_TFC4, UL_TFC6 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC3, UL_TFC4, UL_TFC7 |
RB5: 1272 |
RB5: 1272 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC3, UL_TFC4, UL_TFC7 |
RB5: 1272 |
RB5: 2552 |
|
5 |
DL_TFC5 |
UL_TFC3 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC3, UL_TFC4, UL_TFC7 |
RB5: 1272 |
RB5: 3832 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.33.1.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3, 4 and 5: RB5/TF3 (4×336).
3. At step 15 the UE shall return
– for sub-test 1 to 5: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.33.2 Interactive or background / UL:128 DL:384 kbps / PS RAB / 20 ms TTI
18.1.2.33.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.33.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.33 for the 20 ms TTI case.
18.1.2.33.2.3 Method of test
Uplink TFS:
|
TFI |
RB5 (128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (384 kbps, 20ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
|
|
TF5, bits |
12×336 |
N/A |
|
|
TF6, bits |
16×336 |
N/A |
|
|
TF7, bits |
20×336 |
N/A |
|
|
TF8, bits |
24×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF6, TF0) |
|
DL_TFC7 |
(TF7, TF0) |
|
DL_TFC8 |
(TF8, TF0) |
|
DL_TFC9 |
(TF0, TF1) |
|
DL_TFC10 |
(TF1, TF1) |
|
DL_TFC11 |
(TF2, TF1) |
|
DL_TFC12 |
(TF3, TF1) |
|
DL_TFC13 |
(TF4, TF1) |
|
DL_TFC14 |
(TF5, TF1) |
|
DL_TFC15 |
(TF6, TF1) |
|
DL_TFC16 |
(TF7, TF1) |
|
DL_TFC17 |
(TF8, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 1272 |
RB5: 1272 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 2552 |
RB5: 2552 |
|
5 |
DL_TFC5 |
UL_TFC3 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5, |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 3832 |
RB5: 3832 |
|
6 |
DL_TFC6 |
UL_TFC4 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 5112 |
RB5: 5112 |
|
7 |
DL_TFC7 |
UL_TFC3 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 6392 |
RB5: 6392 |
|
8 |
DL_TFC8 |
UL_TFC4 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4 UL_TFC5, UL_TFC9 |
RB5: 7672 |
RB5: 7672 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.33.2.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (4×336).
– for sub-test 4 to 8: RB5/TF4 (8×336).
3. At step 15 the UE shall return
– for sub-test 1 to 8: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.34 Interactive or background / UL:384 DL:384 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.34.1 Interactive or background / UL:384 DL:384 kbps / PS RAB / 10 ms TTI
18.1.2.34.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.34.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.34 for the 10 ms TTI case.
18.1.2.34.1.3 Method of test
Uplink TFS:
|
TFI |
RB5 (384 kbps, 10ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
|
|
TF5, bits |
12×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF5, TF0) |
|
UL_TFC6 |
(TF0, TF1) |
|
UL_TFC7 |
(TF1, TF1) |
|
UL_TFC8 |
(TF2, TF1) |
|
UL_TFC9 |
(TF3, TF1) |
|
UL_TFC10 |
(TF4, TF1) |
|
UL_TFC11 |
(TF5, TF1) |
Downlink TFS:
|
TFI |
RB5 (384 kbps, 10ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
|
|
TF5, bits |
12×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF0, TF1) |
|
DL_TFC7 |
(TF1, TF1) |
|
DL_TFC8 |
(TF2, TF1) |
|
DL_TFC9 |
(TF3, TF1) |
|
DL_TFC10 |
(TF4, TF1) |
|
DL_TFC11 |
(TF5, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC7, UL_TFC0, UL_TFC7 |
UL_TFC0, UL_TFC1, UL_TFC7, UL_TFC8 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC7, UL_TFC0, UL_TFC7 |
UL_TFC0, UL_TFC2, UL_TFC7, UL_TFC9 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC7, UL_TFC0, UL_TFC7 |
UL_TFC0, UL_TFC3, UL_TFC7, UL_TFC10 |
RB5: 1272 |
RB5: 1272 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC7, UL_TFC0, UL_TFC7 |
UL_TFC0, UL_TFC4, UL_TFC7, UL_TFC11 |
RB5: 2552 |
RB5: 2552 |
|
5 |
DL_TFC5 |
UL_TFC5 |
DL_TFC0, DL_TFC7, UL_TFC0, UL_TFC7 |
UL_TFC0, UL_TFC5, UL_TFC7, UL_TFC12 |
RB5: 3832 |
RB5: 3832 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.34.1.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (4×336).
– for sub-test 4: RB5/TF4 (8×336).
– for sub-test 5: RB5/TF4 (12×336).
3. At step 15 the UE shall return
– for sub-test 1 to 5: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.34.2 Interactive or background / UL:384 DL:384 kbps / PS RAB / 20 ms TTI
18.1.2.34.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.34.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.34. for the 20 ms TTI case
18.1.2.34.2.3 Method of test
Uplink TFS:
|
TFI |
RB5 (384 kbps, 20ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
|
|
TF5, bits |
12×336 |
N/A |
|
|
TF6, bits |
16×336 |
N/A |
|
|
TF7, bits |
20×336 |
N/A |
|
|
TF8, bits |
24×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF5, TF0) |
|
UL_TFC6 |
(TF6, TF0) |
|
UL_TFC7 |
(TF7, TF0) |
|
UL_TFC8 |
(TF8, TF0) |
|
UL_TFC9 |
(TF0, TF1) |
|
UL_TFC10 |
(TF1, TF1) |
|
UL_TFC11 |
(TF2, TF1) |
|
UL_TFC12 |
(TF3, TF1) |
|
UL_TFC13 |
(TF4, TF1) |
|
UL_TFC14 |
(TF5, TF1) |
|
UL_TFC15 |
(TF6, TF1) |
|
UL_TFC16 |
(TF7, TF1) |
|
UL_TFC17 |
(TF8, TF1) |
Downlink TFS:
|
TFI |
RB5 (384 kbps, 20ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
|
|
TF5, bits |
12×336 |
N/A |
|
|
TF6, bits |
16×336 |
N/A |
|
|
TF7, bits |
20×336 |
N/A |
|
|
TF8, bits |
24×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF6, TF0) |
|
DL_TFC7 |
(TF7, TF0) |
|
DL_TFC8 |
(TF8, TF0) |
|
DL_TFC9 |
(TF0, TF1) |
|
DL_TFC10 |
(TF1, TF1) |
|
DL_TFC11 |
(TF2, TF1) |
|
DL_TFC12 |
(TF3, TF1) |
|
DL_TFC13 |
(TF4, TF1) |
|
DL_TFC14 |
(TF5, TF1) |
|
DL_TFC15 |
(TF6, TF1) |
|
DL_TFC16 |
(TF7, TF1) |
|
DL_TFC17 |
(TF8, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC3, UL_TFC9, UL_TFC12 |
RB5: 1272 |
RB5: 1272 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC4, UL_TFC9, UL_TFC13 |
RB5: 2552 |
RB5: 2552 |
|
5 |
DL_TFC5 |
UL_TFC5 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC5, UL_TFC9, UL_TFC14 |
RB5: 3832 |
RB5: 3832 |
|
6 |
DL_TFC6 |
UL_TFC6 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC6, UL_TFC9, UL_TFC15 |
RB5: 5112 |
RB5: 5112 |
|
7 |
DL_TFC7 |
UL_TFC7 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC7, UL_TFC9, UL_TFC16 |
RB5: 6392 |
RB5: 6392 |
|
8 |
DL_TFC8 |
UL_TFC8 |
DL_TFC0, DL_TFC9, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC8, UL_TFC9, UL_TFC17 |
RB5: 7672 |
RB5: 7672 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.34.2.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (4×336).
– for sub-test 4: RB5/TF4 (8×336).
– for sub-test 5: RB5/TF5 (12×336).
– for sub-test 6: RB5/TF6 (16×336).
– for sub-test 7: RB5/TF7 (20×336).
– for sub-test 8: RB5/TF8 (24×336).
3. At step 15 the UE shall return
– for sub-test 1 to 8: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.35 Interactive or background / UL:64 DL:2048 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.35.1 Interactive or background / UL:64 DL:2048 kbps / PS RAB / 10 ms TTI
18.1.2.35.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.35.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.35 for the 10 ms TTI case.
18.1.2.35.1.3 Method of test
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (2048 kbps, 10ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x656 |
0x148 |
|
TF1, bits |
1×656 |
1×148 |
|
|
TF2, bits |
2×656 |
N/A |
|
|
TF3, bits |
4×656 |
N/A |
|
|
TF4, bits |
8×656 |
N/A |
|
|
TF5, bits |
12×656 |
N/A |
|
|
TF6, bits |
16×656 |
N/A |
|
|
TF7, bits |
20×656 |
N/A |
|
|
TF8, bits |
24×656 |
N/A |
|
|
TF9, bits |
28×656 |
N/A |
|
|
TF10, bits |
32×656 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF6, TF0) |
|
DL_TFC7 |
(TF7, TF0) |
|
DL_TFC8 |
(TF8, TF0) |
|
DL_TFC9 |
(TF9, TF0) |
|
DL_TFC10 |
(TF10, TF0) |
|
DL_TFC11 |
(TF0, TF1) |
|
DL_TFC12 |
(TF1, TF1) |
|
DL_TFC13 |
(TF2, TF1) |
|
DL_TFC14 |
(TF3, TF1) |
|
DL_TFC15 |
(TF4, TF1) |
|
DL_TFC16 |
(TF5, TF1) |
|
DL_TFC17 |
(TF6, TF1) |
|
DL_TFC18 |
(TF7, TF1) |
|
DL_TFC19 |
(TF8, TF1) |
|
DL_TFC20 |
(TF9, TF1) |
|
DL_TFC21 |
(TF10, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 632 |
RB5: 632 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 1272 |
RB5: 1272 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 2872 |
RB5: 2552 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 5112 |
RB5: 5112 |
|
5 |
DL_TFC5 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 7672 |
RB5: 7672 |
|
6 |
DL_TFC6 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 10232 |
RB5: 10232 |
|
7 |
DL_TFC7 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 12792 |
RB5: 12792 |
|
8 |
DL_TFC8 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 15352 |
RB5: 15352 |
|
9 |
DL_TFC9 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 17912 |
RB5: 17912 |
|
10 |
DL_TFC10 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 20472 |
RB5: 20472 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.35.1.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (3×336).
– for sub-test 4 to 10: RB5/TF4 (4×336).
3. At step 15 the UE shall return
– for sub-test 1 to 10: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.35.2 Interactive or background / UL:64 DL:2048 kbps / PS RAB / 20 ms TTI
18.1.2.35.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.35.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.35 for the 20 ms TTI case.
18.1.2.35.2.3 Method of test
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (2048 kbps, 10ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x656 |
0x148 |
|
TF1, bits |
1×656 |
1×148 |
|
|
TF2, bits |
2×656 |
N/A |
|
|
TF3, bits |
4×656 |
N/A |
|
|
TF4, bits |
8×656 |
N/A |
|
|
TF5, bits |
12×656 |
N/A |
|
|
TF6, bits |
16×656 |
N/A |
|
|
TF7, bits |
20×656 |
N/A |
|
|
TF8, bits |
24×656 |
N/A |
|
|
TF9, bits |
28×656 |
N/A |
|
|
TF10, bits |
32×656 |
N/A |
|
|
TF11, bits |
36×656 |
N/A |
|
|
TF12, bits |
40×656 |
N/A |
|
|
TF13, bits |
44×656 |
N/A |
|
|
TF14, bits |
48×656 |
N/A |
|
|
TF15, bits |
52×656 |
N/A |
|
|
TF16, bits |
56×656 |
N/A |
|
|
TF17, bits |
60×656 |
N/A |
|
|
TF18, bits |
64×656 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|---|---|
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF6, TF0) |
|
DL_TFC7 |
(TF7, TF0) |
|
DL_TFC8 |
(TF8, TF0) |
|
DL_TFC9 |
(TF9, TF0) |
|
DL_TFC10 |
(TF10, TF0) |
|
DL_TFC11 |
(TF11, TF0) |
|
DL_TFC12 |
(TF12, TF0) |
|
DL_TFC13 |
(TF13, TF0) |
|
DL_TFC14 |
(TF14, TF0) |
|
DL_TFC15 |
(TF15, TF0) |
|
DL_TFC16 |
(TF16, TF0) |
|
DL_TFC17 |
(TF17, TF0) |
|
DL_TFC18 |
(TF18, TF0) |
|
DL_TFC19 |
(TF0, TF1) |
|
DL_TFC20 |
(TF1, TF1) |
|
DL_TFC21 |
(TF2, TF1) |
|
DL_TFC22 |
(TF3, TF1) |
|
DL_TFC23 |
(TF4, TF1) |
|
DL_TFC24 |
(TF5, TF1) |
|
DL_TFC25 |
(TF6, TF1) |
|
DL_TFC26 |
(TF7, TF1) |
|
DL_TFC27 |
(TF8, TF1) |
|
DL_TFC28 |
(TF9, TF1) |
|
DL_TFC29 |
(TF10, TF1) |
|
DL_TFC30 |
(TF11, TF1) |
|
DL_TFC31 |
(TF12, TF1) |
|
DL_TFC32 |
(TF13, TF1) |
|
DL_TFC33 |
(TF14, TF1) |
|
DL_TFC34 |
(TF15, TF1) |
|
DL_TFC35 |
(TF16, TF1) |
|
DL_TFC36 |
(TF17, TF1) |
|
DL_TFC37 |
(TF18, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 632 |
RB5: 632 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 1272 |
RB5: 1272 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 2872 |
RB5: 2552 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 5112 |
RB5: 5112 |
|
5 |
DL_TFC5 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 7672 |
RB5: 7672 |
|
6 |
DL_TFC6 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 10232 |
RB5: 10232 |
|
7 |
DL_TFC7 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 12792 |
RB5: 12792 |
|
8 |
DL_TFC8 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 15352 |
RB5: 15352 |
|
9 |
DL_TFC9 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 17912 |
RB5: 17912 |
|
10 |
DL_TFC10 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 20472 |
RB5: 20472 |
|
11 |
DL_TFC11 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 23032 |
RB5: 23032 |
|
12 |
DL_TFC12 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 25592 |
RB5: 25592 |
|
13 |
DL_TFC13 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4 UL_TFC5, UL_TFC9 |
RB5: 28152 |
RB5: 28152 |
|
14 |
DL_TFC14 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 30712 |
RB5: 30712 |
|
15 |
DL_TFC15 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 33272 |
RB5: 33272 |
|
16 |
DL_TFC16 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 35832 |
RB5: 35832 |
|
17 |
DL_TFC17 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4 UL_TFC5, UL_TFC9 |
RB5: 38392 |
RB5: 38392 |
|
18 |
DL_TFC18 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 40952 |
RB5: 40952 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.35.2.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (3×336).
– for sub-test 4 to 18: RB5/TF4 (4×336).
3. At step 15 the UE shall return
– for sub-test 1 to 18: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.36 Interactive or background / UL:128 DL:2048 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.36.1 Interactive or background / UL:128 DL:2048 kbps / PS RAB / 10 ms TTI
18.1.2.36.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.36.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.36 for the 10 ms TTI case.
18.1.2.36.1.3 Method of test
Uplink TFS:
|
TFI |
RB5 (128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (2048 kbps, 10ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x656 |
0x148 |
|
TF1, bits |
1×656 |
1×148 |
|
|
TF2, bits |
2×656 |
N/A |
|
|
TF3, bits |
4×656 |
N/A |
|
|
TF4, bits |
8×656 |
N/A |
|
|
TF5, bits |
12×656 |
N/A |
|
|
TF6, bits |
16×656 |
N/A |
|
|
TF7, bits |
20×656 |
N/A |
|
|
TF8, bits |
24×656 |
N/A |
|
|
TF9, bits |
28×656 |
N/A |
|
|
TF10, bits |
32×656 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|---|---|
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF6, TF0) |
|
DL_TFC7 |
(TF7, TF0) |
|
DL_TFC8 |
(TF8, TF0) |
|
DL_TFC9 |
(TF9, TF0) |
|
DL_TFC10 |
(TF10, TF0) |
|
DL_TFC11 |
(TF0, TF1) |
|
DL_TFC12 |
(TF1, TF1) |
|
DL_TFC13 |
(TF2, TF1) |
|
DL_TFC14 |
(TF3, TF1) |
|
DL_TFC15 |
(TF4, TF1) |
|
DL_TFC16 |
(TF5, TF1) |
|
DL_TFC17 |
(TF6, TF1) |
|
DL_TFC18 |
(TF7, TF1) |
|
DL_TFC19 |
(TF8, TF1) |
|
DL_TFC20 |
(TF9, TF1) |
|
DL_TFC21 |
(TF10, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 632 |
RB5: 632 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 1272 |
RB5: 1272 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 2552 |
RB5: 2552 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 5112 |
RB5: 5112 |
|
5 |
DL_TFC5 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 7672 |
RB5: 7672 |
|
6 |
DL_TFC6 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 10232 |
RB5: 10232 |
|
7 |
DL_TFC7 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 12792 |
RB5: 12792 |
|
8 |
DL_TFC8 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 15352 |
RB5: 15352 |
|
9 |
DL_TFC9 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 17912 |
RB5: 17912 |
|
10 |
DL_TFC10 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 20472 |
RB5: 20472 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.36.1.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (4×336).
– for sub-test 4 to 10: RB5/TF4 (8×336).
3. At step 15 the UE shall return
– for sub-test 1 to 10: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.36.2 Interactive or background / UL:128 DL:2048 kbps / PS RAB / 20 ms TTI
18.1.2.36.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.36.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.36 for the 20 ms TTI case.
18.1.2.36.2.3 Method of test
Uplink TFS:
|
TFI |
RB5 (128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (2048 kbps, 10ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x656 |
0x148 |
|
TF1, bits |
1×656 |
1×148 |
|
|
TF2, bits |
2×656 |
N/A |
|
|
TF3, bits |
4×656 |
N/A |
|
|
TF4, bits |
8×656 |
N/A |
|
|
TF5, bits |
12×656 |
N/A |
|
|
TF6, bits |
16×656 |
N/A |
|
|
TF7, bits |
20×656 |
N/A |
|
|
TF8, bits |
24×656 |
N/A |
|
|
TF9, bits |
28×656 |
N/A |
|
|
TF10, bits |
32×656 |
N/A |
|
|
TF11, bits |
36×656 |
N/A |
|
|
TF12, bits |
40×656 |
N/A |
|
|
TF13, bits |
44×656 |
N/A |
|
|
TF14, bits |
48×656 |
N/A |
|
|
TF15, bits |
52×656 |
N/A |
|
|
TF16, bits |
56×656 |
N/A |
|
|
TF17, bits |
60×656 |
N/A |
|
|
TF18, bits |
64×656 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|---|---|
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF6, TF0) |
|
DL_TFC7 |
(TF7, TF0) |
|
DL_TFC8 |
(TF8, TF0) |
|
DL_TFC9 |
(TF9, TF0) |
|
DL_TFC10 |
(TF10, TF0) |
|
DL_TFC11 |
(TF11, TF0) |
|
DL_TFC12 |
(TF12, TF0) |
|
DL_TFC13 |
(TF13, TF0) |
|
DL_TFC14 |
(TF14, TF0) |
|
DL_TFC15 |
(TF15, TF0) |
|
DL_TFC16 |
(TF16, TF0) |
|
DL_TFC17 |
(TF17, TF0) |
|
DL_TFC18 |
(TF18, TF0) |
|
DL_TFC19 |
(TF0, TF1) |
|
DL_TFC20 |
(TF1, TF1) |
|
DL_TFC21 |
(TF2, TF1) |
|
DL_TFC22 |
(TF3, TF1) |
|
DL_TFC23 |
(TF4, TF1) |
|
DL_TFC24 |
(TF5, TF1) |
|
DL_TFC25 |
(TF6, TF1) |
|
DL_TFC26 |
(TF7, TF1) |
|
DL_TFC27 |
(TF8, TF1) |
|
DL_TFC28 |
(TF9, TF1) |
|
DL_TFC29 |
(TF10, TF1) |
|
DL_TFC30 |
(TF11, TF1) |
|
DL_TFC31 |
(TF12, TF1) |
|
DL_TFC32 |
(TF13, TF1) |
|
DL_TFC33 |
(TF14, TF1) |
|
DL_TFC34 |
(TF15, TF1) |
|
DL_TFC35 |
(TF16, TF1) |
|
DL_TFC36 |
(TF17, TF1) |
|
DL_TFC37 |
(TF18, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 632 |
RB5: 632 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 1272 |
RB5: 1272 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 2552 |
RB5: 2552 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 5112 |
RB5: 5112 |
|
5 |
DL_TFC5 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 7672 |
RB5: 7672 |
|
6 |
DL_TFC6 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 10232 |
RB5: 10232 |
|
7 |
DL_TFC7 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 12792 |
RB5: 12792 |
|
8 |
DL_TFC8 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 15352 |
RB5: 15352 |
|
9 |
DL_TFC9 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 17912 |
RB5: 17912 |
|
10 |
DL_TFC10 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 20472 |
RB5: 20472 |
|
11 |
DL_TFC11 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 23032 |
RB5: 23032 |
|
12 |
DL_TFC12 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 25592 |
RB5: 25592 |
|
13 |
DL_TFC13 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 28152 |
RB5: 28152 |
|
14 |
DL_TFC14 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 30712 |
RB5: 30712 |
|
15 |
DL_TFC15 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 33272 |
RB5: 33272 |
|
16 |
DL_TFC16 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 35832 |
RB5: 35832 |
|
17 |
DL_TFC17 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 38392 |
RB5: 38392 |
|
18 |
DL_TFC18 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 40952 |
RB5: 40952 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.36.2.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (4×336).
– for sub-test 4 to 18: RB5/TF4 (8×336).
3. At step 15 the UE shall return
– for sub-test 1 to 18: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.37 Interactive or background / UL:384 DL:2048 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.37.1 Interactive or background / UL:384 DL:2048 kbps / PS RAB / 10 ms TTI
18.1.2.37.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.37.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.37 for the 10 ms TTI case.
18.1.2.37.1.3 Method of test
Uplink TFS:
|
TFI |
RB5 (384 kbps, 10ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
|
|
TF5, bits |
12×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF5, TF0) |
|
UL_TFC6 |
(TF0, TF1) |
|
UL_TFC7 |
(TF1, TF1) |
|
UL_TFC8 |
(TF2, TF1) |
|
UL_TFC9 |
(TF3, TF1) |
|
UL_TFC10 |
(TF4, TF1) |
|
UL_TFC11 |
(TF5, TF1) |
Downlink TFS:
|
TFI |
RB5 (2048 kbps, 10ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x656 |
0x148 |
|
TF1, bits |
1×656 |
1×148 |
|
|
TF2, bits |
2×656 |
N/A |
|
|
TF3, bits |
4×656 |
N/A |
|
|
TF4, bits |
8×656 |
N/A |
|
|
TF5, bits |
12×656 |
N/A |
|
|
TF6, bits |
16×656 |
N/A |
|
|
TF7, bits |
20×656 |
N/A |
|
|
TF8, bits |
24×656 |
N/A |
|
|
TF9, bits |
28×656 |
N/A |
|
|
TF10, bits |
32×656 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|---|---|
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF6, TF0) |
|
DL_TFC7 |
(TF7, TF0) |
|
DL_TFC8 |
(TF8, TF0) |
|
DL_TFC9 |
(TF9, TF0) |
|
DL_TFC10 |
(TF10, TF0) |
|
DL_TFC11 |
(TF0, TF1) |
|
DL_TFC12 |
(TF1, TF1) |
|
DL_TFC13 |
(TF2, TF1) |
|
DL_TFC14 |
(TF3, TF1) |
|
DL_TFC15 |
(TF4, TF1) |
|
DL_TFC16 |
(TF5, TF1) |
|
DL_TFC17 |
(TF6, TF1) |
|
DL_TFC18 |
(TF7, TF1) |
|
DL_TFC19 |
(TF8, TF1) |
|
DL_TFC20 |
(TF9, TF1) |
|
DL_TFC21 |
(TF10, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7 |
RB5: 632 |
RB5: 632 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8 |
RB5: 1272 |
RB5: 1272 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 2552 |
RB5: 2552 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC4, UL_TFC6, UL_TFC10 |
RB5: 5112 |
RB5: 5112 |
|
5 |
DL_TFC5 |
UL_TFC5 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC5, UL_TFC6, UL_TFC11 |
RB5: 7672 |
RB5: 7672 |
|
6 |
DL_TFC6 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC4, UL_TFC6, UL_TFC10 |
RB5: 10232 |
RB5: 10232 |
|
7 |
DL_TFC7 |
UL_TFC3 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 12792 |
RB5: 12792 |
|
8 |
DL_TFC8 |
UL_TFC5 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC5, UL_TFC6, UL_TFC11 |
RB5: 15352 |
RB5: 15352 |
|
9 |
DL_TFC9 |
UL_TFC3 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 17912 |
RB5: 17912 |
|
10 |
DL_TFC10 |
UL_TFC4 |
DL_TFC0, DL_TFC11, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC4, UL_TFC6, UL_TFC10 |
RB5: 20472 |
RB5: 20472 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.37.1.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (4×336).
– for sub-test 4: RB5/TF3 (8×336).
– for sub-test 5 to 10: RB5/TF4 (12×336).
3. At step 15 the UE shall return
– for sub-test 1 to 10: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.37.2 Interactive or background / UL:384 DL:2048 kbps / PS RAB / 20 ms TTI
18.1.2.37.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.37.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.37 for the 20 ms TTI case.
18.1.2.37.2.3 Method of test
Uplink TFS:
|
TFI |
RB5 (384 kbps, 20ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
|
|
TF5, bits |
12×336 |
N/A |
|
|
TF6, bits |
16×336 |
N/A |
|
|
TF7, bits |
20×336 |
N/A |
|
|
TF8, bits |
24×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|---|---|
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF5, TF0) |
|
UL_TFC6 |
(TF6, TF0) |
|
UL_TFC7 |
(TF7, TF0) |
|
UL_TFC8 |
(TF8, TF0) |
|
UL_TFC9 |
(TF0, TF1) |
|
UL_TFC10 |
(TF1, TF1) |
|
UL_TFC11 |
(TF2, TF1) |
|
UL_TFC12 |
(TF3, TF1) |
|
UL_TFC13 |
(TF4, TF1) |
|
UL_TFC14 |
(TF5, TF1) |
|
UL_TFC15 |
(TF6, TF1) |
|
UL_TFC16 |
(TF7, TF1) |
|
UL_TFC17 |
(TF8, TF1) |
Downlink TFS:
|
TFI |
RB5 (2048 kbps, 10ms) |
DCCH |
|
|
TFS |
TF0, bits |
0x656 |
0x148 |
|
TF1, bits |
1×656 |
1×148 |
|
|
TF2, bits |
2×656 |
N/A |
|
|
TF3, bits |
4×656 |
N/A |
|
|
TF4, bits |
8×656 |
N/A |
|
|
TF5, bits |
12×656 |
N/A |
|
|
TF6, bits |
16×656 |
N/A |
|
|
TF7, bits |
20×656 |
N/A |
|
|
TF8, bits |
24×656 |
N/A |
|
|
TF9, bits |
28×656 |
N/A |
|
|
TF10, bits |
32×656 |
N/A |
|
|
TF11, bits |
36×656 |
N/A |
|
|
TF12, bits |
40×656 |
N/A |
|
|
TF13, bits |
44×656 |
N/A |
|
|
TF14, bits |
48×656 |
N/A |
|
|
TF15, bits |
52×656 |
N/A |
|
|
TF16, bits |
56×656 |
N/A |
|
|
TF17, bits |
60×656 |
N/A |
|
|
TF18, bits |
64×656 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|---|---|
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF5, TF0) |
|
DL_TFC6 |
(TF6, TF0) |
|
DL_TFC7 |
(TF7, TF0) |
|
DL_TFC8 |
(TF8, TF0) |
|
DL_TFC9 |
(TF9, TF0) |
|
DL_TFC10 |
(TF10, TF0) |
|
DL_TFC11 |
(TF11, TF0) |
|
DL_TFC12 |
(TF12, TF0) |
|
DL_TFC13 |
(TF13, TF0) |
|
DL_TFC14 |
(TF14, TF0) |
|
DL_TFC15 |
(TF15, TF0) |
|
DL_TFC16 |
(TF16, TF0) |
|
DL_TFC17 |
(TF17, TF0) |
|
DL_TFC18 |
(TF18, TF0) |
|
DL_TFC19 |
(TF0, TF1) |
|
DL_TFC20 |
(TF1, TF1) |
|
DL_TFC21 |
(TF2, TF1) |
|
DL_TFC22 |
(TF3, TF1) |
|
DL_TFC23 |
(TF4, TF1) |
|
DL_TFC24 |
(TF5, TF1) |
|
DL_TFC25 |
(TF6, TF1) |
|
DL_TFC26 |
(TF7, TF1) |
|
DL_TFC27 |
(TF8, TF1) |
|
DL_TFC28 |
(TF9, TF1) |
|
DL_TFC29 |
(TF10, TF1) |
|
DL_TFC30 |
(TF11, TF1) |
|
DL_TFC31 |
(TF12, TF1) |
|
DL_TFC32 |
(TF13, TF1) |
|
DL_TFC33 |
(TF14, TF1) |
|
DL_TFC34 |
(TF15, TF1) |
|
DL_TFC35 |
(TF16, TF1) |
|
DL_TFC36 |
(TF17, TF1) |
|
DL_TFC37 |
(TF18, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10 |
RB5: 632 |
RB5: 632 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11 |
RB5: 1272 |
RB5: 1272 |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC3, UL_TFC9, UL_TFC12 |
RB5: 2552 |
RB5: 2552 |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC4, UL_TFC9, UL_TFC13 |
RB5: 5112 |
RB5: 5112 |
|
5 |
DL_TFC5 |
UL_TFC5 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC5, UL_TFC9, UL_TFC14 |
RB5: 7672 |
RB5: 7672 |
|
6 |
DL_TFC6 |
UL_TFC6 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC6, UL_TFC9, UL_TFC15 |
RB5: 10232 |
RB5: 10232 |
|
7 |
DL_TFC7 |
UL_TFC7 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC7, UL_TFC9, UL_TFC16 |
RB5: 12792 |
RB5: 12792 |
|
8 |
DL_TFC8 |
UL_TFC8 |
DL_TFC0, DL_TFC19, , UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC8, UL_TFC9, UL_TFC17 |
RB5: 15352 |
RB5: 15352 |
|
9 |
DL_TFC9 |
UL_TFC3 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC3, UL_TFC9, UL_TFC12 |
RB5: 17912 |
RB5: 17912 |
|
10 |
DL_TFC10 |
UL_TFC6 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC6, UL_TFC9, UL_TFC15 |
RB5: 20472 |
RB5: 20472 |
|
11 |
DL_TFC11 |
UL_TFC3 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC3, UL_TFC9, UL_TFC12 |
RB5: 23032 |
RB5: 23032 |
|
12 |
DL_TFC12 |
UL_TFC7 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC7, UL_TFC9, UL_TFC16 |
RB5: 25592 |
RB5: 25592 |
|
13 |
DL_TFC13 |
UL_TFC3 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC3, UL_TFC9, UL_TFC12 |
RB5: 28152 |
RB5: 28152 |
|
14 |
DL_TFC14 |
UL_TFC8 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC8, UL_TFC9, UL_TFC17 |
RB5: 30712 |
RB5: 30712 |
|
15 |
DL_TFC15 |
UL_TFC3 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC3, UL_TFC9, UL_TFC12 |
RB5: 33272 |
RB5: 33272 |
|
16 |
DL_TFC16 |
UL_TFC4 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC4, UL_TFC9, UL_TFC13 |
RB5: 35832 |
RB5: 35832 |
|
17 |
DL_TFC17 |
UL_TFC7 |
DL_TFC0, DL_TFC19, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC7, UL_TFC9, UL_TFC16 |
RB5: 38392 |
RB5: 38392 |
|
18 |
DL_TFC18 |
UL_TFC6 |
DL_TFC0, DL_TFC19, , UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC6, UL_TFC9, UL_TFC15 |
RB5: 40952 |
RB5: 40952 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.37.2.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (4×336).
– for sub-test 4: RB5/TF4 (8336).
– for sub-test 5: RB5/TF5 (12×336).
– for sub-test 6: RB5/TF6 (16×336).
– for sub-test 7: RB5/TF7 (20×336).
– for sub-test 8 to 18: RB5/TF4 (24×336).
3. At step 15 the UE shall return
– for sub-test 1 to 18: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.38 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:32 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.38.1 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:32 DL:8 kbps / PS RAB / (TC, 20 ms TTI)
18.1.2.38.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.38.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.38 for the turbo channel coding and 20 ms TTI case.
18.1.2.38.1.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF1, TF1) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF2, TF1) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF2, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF2, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (8 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1 DL_TFC7 |
UL_TFC1 UL_TFC10 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2 DL_TFC8 |
UL_TFC2 UL_TFC11 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3 DL_TFC9 |
UL_TFC3 UL_TFC12 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC3, UL_TFC9, UL_TFC12 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
4 |
DL_TFC4 DL_TFC10 |
UL_TFC4 UL_TFC13 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC9, UL_TFC10, UL_TFC12, UL_TFC13 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
5 |
DL_TFC5 DL_TFC11 |
UL_TFC5 UL_TFC14 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC9, UL_TFC11, UL_TFC12, UL_TFC14 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
6 |
DL_TFC3 DL_TFC9 |
UL_TFC6 UL_TFC15 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC6, UL_TFC9, UL_TFC15 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
7 |
DL_TFC4 DL_TFC10 |
UL_TFC7 UL_TFC16 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
8 |
DL_TFC5 DL_TFC11 |
UL_TFC8 UL_TFC17 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.38.1.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub test.
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3 and 6: an RLC SDU on RB8 having the first 312 bits equal to the content sent by the SS in the downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4 and 7: an RLC SDU on RB5 having the same content as sent by SS and on RB8 having the first 312 bits equal to the content sent by the SS in the downlink; and no data shall be received on RB6 and RB7.
– for sub-test 5 and 8: an RLC SDU on RB5, RB6, RB7 having the same content as sent by SS and on RB8 having the first 312 bits equal to the content sent by the SS in the downlink.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.38.2 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:32 DL:8 kbps / PS RAB / (TC, 10 ms TTI)
18.1.2.38.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.38.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.38 for the turbo channel coding and 10 ms TTI case.
18.1.2.38.2.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (8 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1 DL_TFC7 |
UL_TFC1 UL_TFC7 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2 DL_TFC8 |
UL_TFC2 UL_TFC8 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3 DL_TFC9 |
UL_TFC3 UL_TFC9 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
4 |
DL_TFC4 DL_TFC10 |
UL_TFC4 UL_TFC10 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
5 |
DL_TFC5 DL_TFC11 |
UL_TFC5 UL_TFC11 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. RB8: Test data size has been set to DL TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit). As the uplink TTI for RB8 is 10 ms while the downlink TTI is 40 ms then, to achieve continuous data transmission in uplink the size of the uplink RLC SDU has been set such that it will be transmitted over four subsequent TTIs, i.e. UL RLC SDU SIZE has been set to four times the uplink TFS size minus 8 (the size of a 7 bit length indicator and expansion bit). |
||||||
18.1.2.38.2.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub test.
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3: an RLC SDU on RB8 having the first 312 bits equal to the content sent by the SS in the downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4: an RLC SDU on RB5 having the same content as sent by SS and on RB8 having the first 312 bits equal to the content sent by the SS in the downlink; and no data shall be received on RB6 and RB7.
- for sub-test 5: an RLC SDU on RB5, RB6, RB7 having the same content as sent by SS and on RB8 having the first 312 bits equal to the content sent by the SS in the downlink.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.38.3 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:32 DL:8 kbps / PS RAB / (CC, 20 ms TTI)
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.38 for the convolutional channel coding and 20 ms TTI case.
See test case 18.1.2.38.1 for test procedure and test requirement.
18.1.2.38.4 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:32 DL:8 kbps / PS RAB / (CC, 10 ms TTI)
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.38 for the convolutional channel coding and 10 ms TTI case.
See test case 18.1.2.38.2 for test procedure and test requirement.
18.1.2.39 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:32 DL:64 kbps / PS RAB+ UL:3.4 DL: 3.4 kbps SRBs for DCCH
18.1.2.39.1 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:32 DL:64 kbps / PS RAB / (TC, 10 ms TTI)
18.1.2.39.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.39.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.39 for the uplink turbo channel coding and 10 ms TTI case.
18.1.2.39.1.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (32 kbps, 10 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps, 20 ms TTI) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC16 |
UL_TFC1 UL_TFC7 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC17 |
UL_TFC2, UL_TFC8 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3, DL_TFC18 |
UL_TFC3, UL_TFC9 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
4 |
DL_TFC4, DL_TFC19 |
UL_TFC4, UL_TFC10 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
5 |
DL_TFC5, DL_TFC20 |
UL_TFC5 UL_TFC11 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
6 |
DL_TFC6, DL_TFC21 |
UL_TFC3, UL_TFC9 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 632 |
|
7 |
DL_TFC7, DL_TFC22 |
UL_TFC4, UL_TFC10 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 632 |
|
8 |
DL_TFC8, DL_TFC23 |
UL_TFC5, UL_TFC11 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
|
9 |
DL_TFC9, DL_TFC24 |
UL_TFC3, UL_TFC9 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 952 |
|
10 |
DL_TFC10, DL_TFC25 |
UL_TFC4, UL_TFC10 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 952 |
|
11 |
DL_TFC11, DL_TFC26 |
UL_TFC5, UL_TFC11 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 |
|
12 |
DL_TFC12, DL_TFC27 |
UL_TFC3, UL_TFC9 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 1272 |
|
13 |
DL_TFC13, DL_TFC28 |
UL_TFC4, UL_TFC10 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 |
|
14 |
DL_TFC14, DL_TFC29 |
UL_TFC5, UL_TFC11 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.39.1.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3: an RLC SDU on RB8 having the first 312 bits equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4: an RLC SDU on RB8 having the first 312 bits equal to the content of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 5: an RLC SDU on RB8 having the first 312 bits equal to the content of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 6: an RLC SDU on RB8 having the content equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 7: an RLC SDU on RB8 having the content equal to the content of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 8: an RLC SDU on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
– for sub-test 9: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 10: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 11: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 12: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 13: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 14: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.39.2 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:32 DL:64 kbps / PS RAB / (TC, 20 ms TTI)
18.1.2.39.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.39.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.39 for the uplink turbo channel coding and 20 ms TTI case.
18.1.2.39.2.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (32 kbps, 20 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF1, TF1) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF2, TF1) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF2, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF2, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps, 20 ms TTI) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC16 |
UL_TFC1, UL_TFC10 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC17 |
UL_TFC2, UL_TFC11 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3, DL_TFC18 |
UL_TFC3, UL_TFC12 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC3, UL_TFC9, UL_TFC12 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
4 |
DL_TFC4, DL_TFC19 |
UL_TFC4, UL_TFC13 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC9, UL_TFC10, UL_TFC12, UL_TFC13 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
5 |
DL_TFC5, DL_TFC20 |
UL_TFC5, UL_TFC14 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC9, UL_TFC11, UL_TFC12, UL_TFC14 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
6 |
DL_TFC6, DL_TFC21 |
UL_TFC6, UL_TFC15 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC6, UL_TFC9, UL_TFC15 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 632 |
|
7 |
DL_TFC7, DL_TFC22 |
UL_TFC7, UL_TFC16 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 632 |
|
8 |
DL_TFC8, DL_TFC23 |
UL_TFC8, UL_TFC17 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
|
9 |
DL_TFC9, DL_TFC24 |
UL_TFC6, UL_TFC15 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC6, UL_TFC9, UL_TFC15 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 952 |
|
10 |
DL_TFC10, DL_TFC25 |
UL_TFC7, UL_TFC16 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 952 |
|
11 |
DL_TFC11, DL_TFC26 |
UL_TFC8, UL_TFC17 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 |
|
12 |
DL_TFC12, DL_TFC27 |
UL_TFC6, UL_TFC15 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC6, UL_TFC9, UL_TFC15 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 1272 |
|
13 |
DL_TFC13, DL_TFC28 |
UL_TFC7, UL_TFC16 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 |
|
14 |
DL_TFC14, DL_TFC29 |
UL_TFC8, UL_TFC17 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC9 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.39.2.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3: an RLC SDU on RB8 having the same content as sent by SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4: an RLC SDU on RB5 and RB8 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 5: an RLC SDU on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
– for sub-test 6: an RLC SDU on RB8 having the same content as sent by SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 7: an RLC SDU on RB5 and RB8 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 8: an RLC SDU on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
– for sub-test 9: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 10: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 11: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 12: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 13: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 14: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.39.3 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:32 DL:64 kbps / PS RAB / (CC, 10 ms TTI)
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.39 for the uplink convolutional channel coding and 10 ms TTI case.
See test case 18.1.2.39.1 for test procedure and test requirement.
18.1.2.39.4 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:32 DL:64 kbps / PS RAB / (CC, 20 ms TTI)
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.39 for the uplink convolutional channel coding and 20 ms TTI case.
See test case 18.1.2.39.2 for test procedure and test requirement.
18.1.2.40 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:64 DL:64 kbps / PS RAB+ UL:3.4 DL: 3.4 kbps SRBs for DCCH
18.1.2.40.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.40.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.40.
18.1.2.40.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps, 20 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
UL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
UL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
UL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
UL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
UL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
UL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
UL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
UL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
UL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps, 20 ms TTI) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC16 |
UL_TFC1, UL_TFC16 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC17 |
UL_TFC2, UL_TFC17 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3, DL_TFC18 |
UL_TFC3, UL_TFC18 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC3, UL_TFC15, UL_TFC18 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
4 |
DL_TFC4, DL_TFC19 |
UL_TFC4, UL_TFC19 |
DL_TFC0, DL_TFC15, DUL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
5 |
DL_TFC5, DL_TFC20 |
UL_TFC5, UL_TFC20 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
6 |
DL_TFC6, DL_TFC21 |
UL_TFC6, UL_TFC21 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC6, UL_TFC15, UL_TFC21 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 632 |
|
7 |
DL_TFC7, DL_TFC22 |
UL_TFC7, UL_TFC22 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC15, UL_TFC16, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 632 |
|
8 |
DL_TFC8, DL_TFC23 |
UL_TFC8, UL_TFC23 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC15, UL_TFC17, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
|
9 |
DL_TFC9, DL_TFC24 |
UL_TFC9, UL_TFC24 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC9, UL_TFC15, UL_TFC24 |
RB5: 39 RB6: 103 RB7: 60 RB8: 952 |
RB5: No data RB6: No data RB7: No data RB8: 952 |
|
10 |
DL_TFC10, DL_TFC25 |
UL_TFC10, UL_TFC25 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16, UL_TFC24, UL_TFC25 |
RB5: 39 RB6: 103 RB7: 60 RB8: 952 |
RB5: 39 RB6: No data RB7: No data RB8: 952 |
|
11 |
DL_TFC11, DL_TFC26 |
UL_TFC11, UL_TFC26 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17, UL_TFC24, UL_TFC26 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 |
|
12 |
DL_TFC12, DL_TFC27 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 1272 |
|
13 |
DL_TFC13, DL_TFC28 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 |
|
14 |
DL_TFC14, DL_TFC29 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.40.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: RLC SDUs on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3, 6, 9 and 12: RLC SDUs on RB8 having the same content as sent by SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4, 7, 10 and 13: RLC SDUs on RB5 and RB8 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 5, 8, 11 and 14: RLC SDUs on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.41 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:64 DL:128 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.41.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.41.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.41.
18.1.2.41.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps, 20 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
UL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
UL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
UL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
UL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
UL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
UL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
UL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
UL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
UL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (128 kbps, 20 ms TTI) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
8×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC16 |
UL_TFC1, UL_TFC16 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC17 |
UL_TFC2, UL_TFC17 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3, DL_TFC18 |
UL_TFC3, UL_TFC18 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC3, UL_TFC15, UL_TFC18 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
4 |
DL_TFC4, DL_TFC19 |
UL_TFC4, UL_TFC19 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC3 UL_TFC4, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
5 |
DL_TFC5, DL_TFC20 |
UL_TFC5, UL_TFC20 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC15, UL_TFC17, UL_TCF18, UL_TFC20 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
6 |
DL_TFC6, DL_TFC21 |
UL_TFC6, UL_TFC21 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC6, UL_TFC15, UL_TFC21 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 632 |
|
7 |
DL_TFC7, DL_TFC22 |
UL_TFC7, UL_TFC22 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC15, UL_TFC16, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 632 |
|
8 |
DL_TFC8, DL_TFC23 |
UL_TFC8, UL_TFC23 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC15, UL_TFC17, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
|
9 |
DL_TFC9, DL_TFC24 |
UL_TFC9, UL_TFC24 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC9, UL_TFC15, UL_TFC24 |
RB5: 39 RB6: 103 RB7: 60 RB8: 952 |
RB5: No data RB6: No data RB7: No data RB8: 1272 |
|
10 |
DL_TFC10, DL_TFC25 |
UL_TFC10, UL_TFC25 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16, UL_TFC24, UL_TFC25 |
RB5: 39 RB6: 103 RB7: 60 RB8: 952 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 |
|
11 |
DL_TFC11, DL_TFC26 |
UL_TFC11, UL_TFC26 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17, UL_TFC24, UL_TFC26 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
|
12 |
DL_TFC12, DL_TFC27 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 2552 |
|
13 |
DL_TFC13, DL_TFC28 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC15, , UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 2552 |
|
14 |
DL_TFC14, DL_TFC29 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.41.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: RLC SDUs on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3: RLC SDUs on RB8 having the same content as sent by SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4: RLC SDUs on RB5 and RB8 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 5: RLC SDUs on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
– for sub-test 6: RLC SDUs on RB8 having the same content as sent by SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 7: RLC SDUs on RB5 and RB8 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 8: RLC SDUs on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
– for sub-test 9: RLC SDUs on RB8 having the content equal to the first 952 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 10: RLC SDUs on RB8 having the content equal to the first 952 bits of the test data sent by the SS in downlink; RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 11: RLC SDUs on RB8 having the content equal to the first 952 bits of the test data sent by the SS in downlink; RLC SDUs on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 12: RLC SDUs on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 13: RLC SDUs on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 14: RLC SDUs on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; RLC SDUs on RB5, RB6 and RB7 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.42 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:64 DL:256 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.42.1 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:64 DL:256 kbps / PS RAB / 10 ms TTI
18.1.2.42.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.42.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.42 for the downlink 10 ms TTI case.
18.1.2.42.1.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
UL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
UL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
UL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
UL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
UL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
UL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
UL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
UL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
UL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (256 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
8×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC16 |
UL_TFC1, DL_TFC16 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC17 |
UL_TFC2, DL_TFC17 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3, DL_TFC18 |
UL_TFC3, DL_TFC18 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC3, UL_TFC15, UL_TFC18 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
4 |
DL_TFC4, DL_TFC19 |
UL_TFC4, DL_TFC19 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
5 |
DL_TFC5, DL_TFC20 |
UL_TFC5, DL_TFC20 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
6 |
DL_TFC6, DL_TFC21 |
UL_TFC6, DL_TFC21 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC6, UL_TFC15, UL_TFC21 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 632 |
|
7 |
DL_TFC7, DL_TFC22 |
UL_TFC7, DL_TFC22 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC15, UL_TFC16, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 632 |
|
8 |
DL_TFC8, DL_TFC23 |
UL_TFC8, DL_TFC23 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC15, UL_TFC17, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
|
9 |
DL_TFC9, DL_TFC24 |
UL_TFC9, DL_TFC24 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC9, UL_TFC15, UL_TFC24 |
RB5: 39 RB6: 103 RB7: 60 RB8: 952 |
RB5: No data RB6: No data RB7: No data RB8: 1272 |
|
10 |
DL_TFC10, DL_TFC25 |
UL_TFC10, DL_TFC25 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16, UL_TFC24, UL_TFC25 |
RB5: 39 RB6: 103 RB7: 60 RB8: 952 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 |
|
11 |
DL_TFC11, DL_TFC26 |
UL_TFC11, DL_TFC26 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17, UL_TFC24, UL_TFC26 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
|
12 |
DL_TFC12, DL_TFC27 |
UL_TFC12, DL_TFC27 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 2552 |
|
13 |
DL_TFC13, DL_TFC28 |
UL_TFC13, DL_TFC28 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 2552 |
|
14 |
DL_TFC14, DL_TFC29 |
UL_TFC14, DL_TFC29 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.42.1.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3: an RLC SDU on RB8 having the first 312 bits equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4: an RLC SDU on RB8 having the first 312 bits equal to the content of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 5: an RLC SDU on RB8 having the first 312 bits equal to the content of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 6: an RLC SDU on RB8 having the content equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 7: an RLC SDU on RB8 having the content equal to the content of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 8: an RLC SDU on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
– for sub-test 9: an RLC SDU on RB8 having the content equal to the first 952 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 10: an RLC SDU on RB8 having the content equal to the first 952 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 11: an RLC SDU on RB8 having the content equal to the first 952 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 12: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 13: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 14: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.42.2 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:64 DL:256 kbps / PS RAB / 20 ms TTI
18.1.2.42.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.42.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.42 for the downlink 20 ms TTI case.
18.1.2.42.2.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
UL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
UL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
UL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
UL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
UL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
UL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
UL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
UL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
UL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (256 kbps, 20 ms) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
8×336 |
N/A |
|
|
TF5, bits |
N/A |
N/A |
N/A |
12×336 |
N/A |
|
|
TF6, bits |
N/A |
N/A |
N/A |
16×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF5, TF0) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF5, TF0) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF5, TF0) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF6, TF0) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF6, TF0) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF6, TF0) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC30 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC31 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC32 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC33 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC34 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC35 |
(TF2, TF1, TF1, TF4, TF1) |
|
DL_TFC36 |
(TF0, TF0, TF0, TF5, TF1) |
|
DL_TFC37 |
(TF1, TF0, TF0, TF5, TF1) |
|
DL_TFC38 |
(TF2, TF1, TF1, TF5, TF1) |
|
DL_TFC39 |
(TF0, TF0, TF0, TF6, TF1) |
|
DL_TFC40 |
(TF1, TF0, TF0, TF6, TF1) |
|
DL_TFC41 |
(TF2, TF1, TF1, TF6, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC22 |
UL_TFC1, UL_TFC16 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC23 |
UL_TFC2, UL_TFC17 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3, DL_TFC24 |
UL_TFC3, UL_TFC18 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC3, UL_TFC15, UL_TFC18 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
4 |
DL_TFC4, DL_TFC25 |
UL_TFC4, UL_TFC19 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
5 |
DL_TFC5, DL_TFC26 |
UL_TFC5, UL_TFC20 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
6 |
DL_TFC6, DL_TFC27 |
UL_TFC6, UL_TFC21 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC6, UL_TFC15, UL_TFC21 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 632 |
|
7 |
DL_TFC7, DL_TFC28 |
UL_TFC7, UL_TFC22 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC15, UL_TFC16, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 632 |
|
8 |
DL_TFC8, DL_TFC29 |
UL_TFC8, UL_TFC23 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC15, UL_TFC17, UL_TFC21 UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
|
9 |
DL_TFC9, DL_TFC30 |
UL_TFC9, UL_TFC24 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC9, UL_TFC15, UL_TFC24 |
RB5: 39 RB6: 103 RB7: 60 RB8: 952 |
RB5: No data RB6: No data RB7: No data RB8: 1272 |
|
10 |
DL_TFC10, DL_TFC31 |
UL_TFC10, UL_TFC25 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16, UL_TFC24, UL_TFC25 |
RB5: 39 RB6: 103 RB7: 60 RB8: 952 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 |
|
11 |
DL_TFC11, DL_TFC32 |
UL_TFC11, UL_TFC26 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17, UL_TFC24, UL_TFC26 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
|
12 |
DL_TFC12, DL_TFC33 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 2552 |
|
13 |
DL_TFC13, DL_TFC34 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27 UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 2552 |
|
14 |
DL_TFC14, DL_TFC35 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
|
15 |
DL_TFC15, DL_TFC36 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 3832 |
|
16 |
DL_TFC16, DL_TFC37 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27 UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 3832 |
|
17 |
DL_TFC17, DL_TFC38 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 3832 |
|
18 |
DL_TFC18, DL_TFC39 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 5112 |
|
19 |
DL_TFC19, DL_TFC40 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 5112 |
|
20 |
DL_TFC20, DL_TFC41 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC21, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 5112 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.42.2.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3: an RLC SDU on RB8 having the content equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4: an RLC SDU on RB5 and RB8 having the content equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB6 and RB7.
– for sub-test 5: an RLC SDU on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
– for sub-test 6: an RLC SDU on RB8 having the content equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 7: an RLC SDU on RB5 and RB8 having the content equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB6 and RB7.
– for sub-test 8: an RLC SDU on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
– for sub-test 9: an RLC SDU on RB8 having the content equal to the first 952 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 10: an RLC SDU on RB8 having the content equal to the first 952 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 11: an RLC SDU on RB8 having the content equal to the first 952 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 12: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 13: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 14: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 15: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 16: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 17: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 18: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 19: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 20: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.43 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:64 DL:384 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.43.1 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:64 DL:384 kbps / PS RAB / 10 ms TTI
18.1.2.43.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.43.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.43 for the downlink 10 ms TTI case.
18.1.2.43.1.3 Method of test
See 18.1.1.2 for test procedure.
For the PS DL:384/UL:64 kbps radio bearer the downlink TTI is 10ms while the uplink TTI is 20ms. As the SS will send one DL SDU every 10 ms then the UE test loop function will return 2 UL SDUs per uplink TTI. To not cause uplink transmission buffer overflow then the UL RLC SDU size should be chosen such that the UE will transmit 2 RLC SDUs per uplink TTI. For the case when the transport format under test does not allow for 2 SDUs to fit into the transport format size without requiring concatenation then the UL RLC SDU size shall be chosen such that one SDU is returned per uplink TTI.
The following RLC parameter value is used in the RADIO BEARER SETUP message used to setup the PS DL:384/UL:64 kbps radio bearer:
|
Uplink RLC |
|
|
Transmission window size |
512 |
NOTE The transmission window size value have been chosen to avoid that UE transmission buffer becomes full during the test.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps, 20 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
UL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
UL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
UL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
UL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
UL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
UL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
UL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
UL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
UL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (384 kbps, 10 ms) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
8×336 |
N/A |
|
|
TF5, bits |
N/A |
N/A |
N/A |
12×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF5, TF0) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF5, TF0) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF5, TF0) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC30 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC31 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC32 |
(TF2, TF1, TF1, TF4, TF1) |
|
DL_TFC33 |
(TF0, TF0, TF0, TF5, TF1) |
|
DL_TFC34 |
(TF1, TF0, TF0, TF5, TF1) |
|
DL_TFC35 |
(TF2, TF1, TF1, TF5, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note 1) |
Test data size (bits) (note 1) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC19 |
UL_TFC1, UL_TFC16 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC20 |
UL_TFC2, UL_TFC17 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3, DL_TFC21 |
UL_TFC3, UL_TFC18 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC3, UL_TFC15, UL_TFC18 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 (note 2) |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
4 |
DL_TFC4, DL_TFC22 |
UL_TFC4, UL_TFC19 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 (note 2) |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
5 |
DL_TFC5, DL_TFC23 |
UL_TFC5, UL_TFC20 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC5, UL_TFC17, UL_TFC18, UL_TFC15, UL_TFC20 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 (note 2) |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
6 |
DL_TFC6, DL_TFC24 |
UL_TFC6, UL_TFC21 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC6, UL_TFC15, UL_TFC21 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 (note 3) |
RB5: No data RB6: No data RB7: No data RB8: 632 |
|
7 |
DL_TFC7, DL_TFC25 |
UL_TFC7, UL_TFC22 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC15, UL_TFC16, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 (note 3) |
RB5: 39 RB6: No data RB7: No data RB8: 632 |
|
8 |
DL_TFC8, DL_TFC26 |
UL_TFC8, UL_TFC23 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC15, UL_TFC17, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 (note 3) |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
|
9 |
DL_TFC9, DL_TFC27 |
UL_TFC9, UL_TFC24 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC9, UL_TFC15, UL_TFC24 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 (note 2) |
RB5: No data RB6: No data RB7: No data RB8: 1272 |
|
10 |
DL_TFC10, DL_TFC28 |
UL_TFC10, UL_TFC25 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16, UL_TFC24, UL_TFC25 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 (note 2) |
RB5: 39 RB6: No data RB7: No data RB8: 1272 |
|
11 |
DL_TFC11, DL_TFC29 |
UL_TFC11, UL_TFC26 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17, UL_TFC24, UL_TFC26 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 (note 2) |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
|
12 |
DL_TFC12, DL_TFC30 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 (note 3) |
RB5: No data RB6: No data RB7: No data RB8: 2552 |
|
13 |
DL_TFC13, DL_TFC31 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 (note 3) |
RB5: 39 RB6: No data RB7: No data RB8: 2552 |
|
14 |
DL_TFC14, DL_TFC32 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 (note 3) |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
|
15 |
DL_TFC15, DL_TFC33 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 (note 3) |
RB5: No data RB6: No data RB7: No data RB8: 3832 |
|
16 |
DL_TFC16, DL_TFC34 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC18, , UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 (note 3) |
RB5: 39 RB6: No data RB7: No data RB8: 3832 |
|
17 |
DL_TFC17, DL_TFC35 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC18, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 (note 3) |
RB5: 81 RB6: 103 RB7: 60 RB8: 3832 |
|
NOTE 1: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. NOTE 2: RB8 (TF1/TF3): For sub-tests where uplink transport format TF1 (1×336) or TF3 (3×336) are used then no adaptation to the difference in downlink TTI (10 ms) and uplink TTI (20ms) is possible as this would require the UE to concatenate 2 SDUs into one PDU for TF1; or into three PDUs for TF3. For these sub-tests the UL RLC SDU size is set equal to the payload size of the UL TF under test minus 8 bits (the size of 7 bit length indicator and expansion bit). NOTE 3: RB8 (TF2/TF4): For sub-tests where uplink transport formats TF2 (2×336) or TF4 (4×336) is used then to adopt to the difference in downlink TTI (10 ms) and uplink TTI (20ms) the UL RLC SDU size has been chosen such that 2 SDUs will be returned per uplink TTI. I.e. the UL RLC SDU size is set equal to half the payload size of the UL TF under test minus 8 bits (the size of 7 bit length indicator and expansion bit). |
||||||
18.1.2.43.1.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: RLC SDUs on RB5 having the same content as sent by the SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: RLC SDUs on RB5, RB6 and RB7 having the same content as sent by the SS; and no data shall be received on RB8.
– for sub-test 3: RLC SDUs on RB8 having the same content as sent by the SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4: RLC SDUs on RB5 and RB8 having the same content as sent by the SS; and no data shall be received on RB6 and RB7.
– for sub-test 5: RLC SDUs on RB5, RB6, RB7 and RB8 having the same content as sent by the SS.
– for sub-test 6: RLC SDUs on RB8 having the first 312 bits equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 7: RLC SDUs on RB5 having the same content as sent by the SS; RLC SDUs on RB8 having the first 312 bits equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB6 and RB7.
– for sub-test 8: RLC SDUs on RB5, RB6 and RB7 having the same content as sent by the SS; and RLC SDUs on RB8 having the first 312 bits equal to the content of the test data sent by the SS in downlink.
– for sub-test 9: RLC SDUs on RB8 having the same content as sent by the SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 10: RLC SDUs on RB5 and RB8 having the same content as sent by the SS; and no data shall be received on RB6 and RB7.
– for sub-test 11: RLC SDUs on RB5, RB6, RB7 and RB8 having the same content as sent by the SS.
– for sub-test 12: RLC SDUs on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 13: RLC SDUs on RB5 having the same content as sent by the SS; RLC SDUs on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; and no data shall be received on RB6 and RB7.
– for sub-test 14: RLC SDUs on RB5, RB6 and RB7 having the same content as sent by the SS; and RLC SDUs on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink.
– for sub-test 15: RLC SDUs on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 16: RLC SDUs on RB5 having the same content as sent by the SS; RLC SDUs on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; and no data shall be received on RB6 and RB7.
– for sub-test 17: RLC SDUs on RB5, RB6 and RB7 having the same content as sent by the SS; and RLC SDUs on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.43.2 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:64 DL:384 kbps / PS RAB / 20 ms TTI
18.1.2.43.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.43.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.43 for the downlink 20 ms TTI case.
18.1.2.43.2.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
UL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
UL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
UL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
UL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
UL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
UL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
UL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
UL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
UL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (384 kbps, 20 ms) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
8×336 |
N/A |
|
|
TF5, bits |
N/A |
N/A |
N/A |
12×336 |
N/A |
|
|
TF6, bits |
N/A |
N/A |
N/A |
16×336 |
N/A |
|
|
TF7, bits |
N/A |
N/A |
N/A |
20×336 |
N/A |
|
|
TF8, bits |
N/A |
N/A |
N/A |
24×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|---|---|
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF5, TF0) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF5, TF0) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF5, TF0) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF6, TF0) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF6, TF0) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF6, TF0) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF7, TF0) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF7, TF0) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF7, TF0) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF8, TF0) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF8, TF0) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF8, TF0) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC30 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC31 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC32 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC33 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC34 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC35 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC36 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC37 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC38 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC39 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC40 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC41 |
(TF2, TF1, TF1, TF4, TF1) |
|
DL_TFC42 |
(TF0, TF0, TF0, TF5, TF1) |
|
DL_TFC43 |
(TF1, TF0, TF0, TF5, TF1) |
|
DL_TFC44 |
(TF2, TF1, TF1, TF5, TF1) |
|
DL_TFC45 |
(TF0, TF0, TF0, TF6, TF1) |
|
DL_TFC46 |
(TF1, TF0, TF0, TF6, TF1) |
|
DL_TFC47 |
(TF2, TF1, TF1, TF6, TF1) |
|
DL_TFC48 |
(TF0, TF0, TF0, TF7, TF1) |
|
DL_TFC49 |
(TF1, TF0, TF0, TF7, TF1) |
|
DL_TFC50 |
(TF2, TF1, TF1, TF7, TF1) |
|
DL_TFC51 |
(TF0, TF0, TF0, TF8, TF1) |
|
DL_TFC52 |
(TF1, TF0, TF0, TF8, TF1) |
|
DL_TFC53 |
(TF2, TF1, TF1, TF8, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC28 |
UL_TFC1,UL_TFC16 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC29 |
UL_TFC2,UL_TFC17 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3, DL_TFC30 |
UL_TFC3,UL_TFC19 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC3, UL_TFC15, UL_TFC18 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
4 |
DL_TFC4, DL_TFC31 |
UL_TFC4,UL_TFC19 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15, |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
5 |
DL_TFC5, DL_TFC32 |
UL_TFC5,UL_TFC20 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC15, UL_TFC17, UL_TFC18 UL_TFC20 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
6 |
DL_TFC6, DL_TFC33 |
UL_TFC6,UL_TFC21 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC6, UL_TFC15, UL_TFC21 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 632 |
|
7 |
DL_TFC7, DL_TFC34 |
UL_TFC7,UL_TFC22 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC15, UL_TFC16, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 632 |
|
8 |
DL_TFC8, DL_TFC35 |
UL_TFC8,UL_TFC23 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC15, UL_TFC17, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
|
9 |
DL_TFC9, DL_TFC36 |
UL_TFC9,UL_TFC24 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC9, UL_TFC15, UL_TFC24 |
RB5: 39 RB6: 103 RB7: 60 RB8: 952 |
RB5: No data RB6: No data RB7: No data RB8: 1272 |
|
10 |
DL_TFC10, DL_TFC37 |
UL_TFC10,UL_TFC25 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16, UL_TFC24 UL_TFC25 |
RB5: 39 RB6: 103 RB7: 60 RB8: 952 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 |
|
11 |
DL_TFC11, DL_TFC38 |
UL_TFC11,UL_TFC26 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17, UL_TFC24, UL_TFC26 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
|
12 |
DL_TFC12, DL_TFC39 |
UL_TFC12,UL_TFC27 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 2552 |
|
13 |
DL_TFC13, DL_TFC40 |
UL_TFC13,UL_TFC28 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 2552 |
|
14 |
DL_TFC14, DL_TFC41 |
UL_TFC14,UL_TFC29 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
|
15 |
DL_TFC15, DL_TFC42 |
UL_TFC12,UL_TFC27 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 3832 |
|
16 |
DL_TFC16, DL_TFC43 |
UL_TFC13,UL_TFC28 |
DL_TFC0, DL_TFC27, , UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 3832 |
|
17 |
DL_TFC17, DL_TFC44 |
UL_TFC14,UL_TFC29 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 3832 |
|
18 |
DL_TFC18, DL_TFC45 |
UL_TFC12,UL_TFC27 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 5112 |
|
19 |
DL_TFC19, DL_TFC46 |
UL_TFC13,UL_TFC28 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 5112 |
|
20 |
DL_TFC20, DL_TFC47 |
UL_TFC14,UL_TFC29 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 5112 |
|
21 |
DL_TFC21, DL_TFC48 |
UL_TFC12,UL_TFC27 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 6392 |
|
22 |
DL_TFC22, DL_TFC49 |
UL_TFC13,UL_TFC28 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 6392 |
|
23 |
DL_TFC23, DL_TFC50 |
UL_TFC14,UL_TFC29 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 6392 |
|
24 |
DL_TFC24, DL_TFC51 |
UL_TFC12,UL_TFC27 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 7672 |
|
25 |
DL_TFC25, DL_TFC52 |
UL_TFC13,UL_TFC28 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 7672 |
|
26 |
DL_TFC26, DL_TFC53 |
UL_TFC14,UL_TFC29 |
DL_TFC0, DL_TFC27, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 7672 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.43.2.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3: an RLC SDU on RB8 having the content equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4: an RLC SDU on RB5 and RB8 having the content equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB6 and RB7.
– for sub-test 5: an RLC SDU on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
– for sub-test 6: an RLC SDU on RB8 having the content equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 7: an RLC SDU on RB5 and RB8 having the content equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB6 and RB7.
– for sub-test 8: an RLC SDU on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
– for sub-test 9: an RLC SDU on RB8 having the content equal to the first 952 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 10: an RLC SDU on RB8 having the content equal to the first 952 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 11: an RLC SDU on RB8 having the content equal to the first 952 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 12: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 13: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 14: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 15: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 16: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 17: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 18: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 19: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 20: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 21: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 22: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 23: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 24: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 25: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 26: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.44 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:128 DL:2048 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.44.1 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:128 DL:2048 kbps / PS RAB / 10 ms TTI
18.1.2.44.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.44.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.44 for the downlink 10 ms TTI case.
18.1.2.44.1.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
8×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
UL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
UL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
UL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
UL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
UL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
UL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
UL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
UL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
UL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (2048 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x656 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×656 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×656 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×656 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
8×656 |
N/A |
|
|
TF5, bits |
N/A |
N/A |
N/A |
12×656 |
N/A |
|
|
TF6, bits |
N/A |
N/A |
N/A |
16×656 |
N/A |
|
|
TF7, bits |
N/A |
N/A |
N/A |
20×656 |
N/A |
|
|
TF8, bits |
N/A |
N/A |
N/A |
24×656 |
N/A |
|
|
TF9, bits |
N/A |
N/A |
N/A |
28×656 |
N/A |
|
|
TF10, bits |
N/A |
N/A |
N/A |
32×656 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|---|---|
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF5, TF0) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF5, TF0) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF5, TF0) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF6, TF0) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF6, TF0) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF6, TF0) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF7, TF0) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF7, TF0) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF7, TF0) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF8, TF0) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF8, TF0) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF8, TF0) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF9, TF0) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF9, TF0) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF9, TF0) |
|
DL_TFC30 |
(TF0, TF0, TF0, TF10, TF0) |
|
DL_TFC31 |
(TF1, TF0, TF0, TF10, TF0) |
|
DL_TFC32 |
(TF2, TF1, TF1, TF10, TF0) |
|
DL_TFC33 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC34 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC35 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC36 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC37 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC38 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC39 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC40 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC41 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC42 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC43 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC44 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC45 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC46 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC47 |
(TF2, TF1, TF1, TF4, TF1) |
|
DL_TFC48 |
(TF0, TF0, TF0, TF5, TF1) |
|
DL_TFC49 |
(TF1, TF0, TF0, TF5, TF1) |
|
DL_TFC50 |
(TF2, TF1, TF1, TF5, TF1) |
|
DL_TFC51 |
(TF0, TF0, TF0, TF6, TF1) |
|
DL_TFC52 |
(TF1, TF0, TF0, TF6, TF1) |
|
DL_TFC53 |
(TF2, TF1, TF1, TF6, TF1) |
|
DL_TFC54 |
(TF0, TF0, TF0, TF7, TF1) |
|
DL_TFC55 |
(TF1, TF0, TF0, TF7, TF1) |
|
DL_TFC56 |
(TF2, TF1, TF1, TF7, TF1) |
|
DL_TFC57 |
(TF0, TF0, TF0, TF8, TF1) |
|
DL_TFC58 |
(TF1, TF0, TF0, TF8, TF1) |
|
DL_TFC59 |
(TF2, TF1, TF1, TF8, TF1) |
|
DL_TFC60 |
(TF0, TF0, TF0, TF9, TF1) |
|
DL_TFC61 |
(TF1, TF0, TF0, TF9, TF1) |
|
DL_TFC62 |
(TF2, TF1, TF1, TF9, TF1) |
|
DL_TFC63 |
(TF0, TF0, TF0, TF10, TF1) |
|
DL_TFC64 |
(TF1, TF0, TF0, TF10, TF1) |
|
DL_TFC65 |
(TF2, TF1, TF1, TF10, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC34 |
UL_TFC1, UL_TFC16 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC35 |
UL_TFC2, UL_TFC17 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3, DL_TFC36 |
UL_TFC3, UL_TFC18 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC3, UL_TFC15, UL_TFC18 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: No data RB6: No data RB7: No data RB8: 632 |
|
4 |
DL_TFC4, DL_TFC37 |
UL_TFC4, UL_TFC19 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 632 |
|
5 |
DL_TFC5, DL_TFC38 |
UL_TFC5, UL_TFC20 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
|
6 |
DL_TFC6, DL_TFC39 |
UL_TFC6, UL_TFC21 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC6, UL_TFC15, UL_TFC21 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 1272 |
|
7 |
DL_TFC7, DL_TFC40 |
UL_TFC7, UL_TFC22 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC15, UL_TFC16, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 |
|
8 |
DL_TFC8, DL_TFC41 |
UL_TFC8, UL_TFC23 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC15, UL_TFC17, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
|
9 |
DL_TFC9, DL_TFC42 |
UL_TFC9, UL_TFC24 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC9, UL_TFC15, UL_TFC24 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 2552 |
|
10 |
DL_TFC10, DL_TFC43 |
UL_TFC10, UL_TFC25 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16, UL_TFC24, UL_TFC25 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 2552 |
|
11 |
DL_TFC11, DL_TFC44 |
UL_TFC11, UL_TFC26 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17, UL_TFC24, UL_TFC26 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
|
12 |
DL_TFC12, DL_TFC45 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 5112 |
|
13 |
DL_TFC13, DL_TFC46 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 5112 |
|
14 |
DL_TFC14, DL_TFC47 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27 UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 5112 |
|
15 |
DL_TFC15, DL_TFC48 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 7672 |
|
16 |
DL_TFC16, DL_TFC49 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 7672 |
|
17 |
DL_TFC17, DL_TFC50 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 7672 |
|
18 |
DL_TFC18, DL_TFC51 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 10232 |
|
19 |
DL_TFC19, DL_TFC52 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 10232 |
|
20 |
DL_TFC20, DL_TFC53 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 10232 |
|
21 |
DL_TFC21, DL_TFC54 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 12792 |
|
22 |
DL_TFC22, DL_TFC55 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 12792 |
|
23 |
DL_TFC23, DL_TFC56 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 12792 |
|
24 |
DL_TFC24, DL_TFC57 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 15352 |
|
25 |
DL_TFC25, DL_TFC58 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 15352 |
|
26 |
DL_TFC26, DL_TFC59 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 15352 |
|
27 |
DL_TFC27, DL_TFC60 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 17912 |
|
28 |
DL_TFC28, DL_TFC61 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 17912 |
|
29 |
DL_TFC29, DL_TFC62 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27 UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 17912 |
|
30 |
DL_TFC30, DL_TFC63 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 20472 |
|
31 |
DL_TFC31, DL_TFC64 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 20472 |
|
32 |
DL_TFC32, DL_TFC65 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC33, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27 UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 20472 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.44.1.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3: an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4: an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 5: an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 6: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 7: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 8: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 9: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 10: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 11: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 12: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 13: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 14: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 15: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 16: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 17: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 18: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 19: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 20: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 21: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 22: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 23: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 24: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 25: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 26: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 27: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 28: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 29: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 30: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 31: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 32: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.44.2 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:128 DL:2048 kbps / PS RAB / 20 ms TTI
18.1.2.44.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.44.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.44 for the downlink 20 ms TTI case.
18.1.2.44.2.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
8×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
UL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
UL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
UL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
UL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
UL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
UL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
UL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
UL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
UL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (2048 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x656 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×656 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×656 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×656 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
8×656 |
N/A |
|
|
TF5, bits |
N/A |
N/A |
N/A |
12×656 |
N/A |
|
|
TF6, bits |
N/A |
N/A |
N/A |
16×656 |
N/A |
|
|
TF7, bits |
N/A |
N/A |
N/A |
20×656 |
N/A |
|
|
TF8, bits |
N/A |
N/A |
N/A |
24×656 |
N/A |
|
|
TF9, bits |
N/A |
N/A |
N/A |
28×656 |
N/A |
|
|
TF10, bits |
N/A |
N/A |
N/A |
32×656 |
N/A |
|
|
TF11, bits |
N/A |
N/A |
N/A |
36×656 |
N/A |
|
|
TF12, bits |
N/A |
N/A |
N/A |
40×656 |
N/A |
|
|
TF13, bits |
N/A |
N/A |
N/A |
44×656 |
N/A |
|
|
TF14, bits |
N/A |
N/A |
N/A |
48×656 |
N/A |
|
|
TF15, bits |
N/A |
N/A |
N/A |
52×656 |
N/A |
|
|
TF16, bits |
N/A |
N/A |
N/A |
56×656 |
N/A |
|
|
TF17, bits |
N/A |
N/A |
N/A |
60×656 |
N/A |
|
|
TF18, bits |
N/A |
N/A |
N/A |
64×656 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|---|---|
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF5, TF0) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF5, TF0) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF5, TF0) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF6, TF0) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF6, TF0) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF6, TF0) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF7, TF0) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF7, TF0) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF7, TF0) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF8, TF0) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF8, TF0) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF8, TF0) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF9, TF0) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF9, TF0) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF9, TF0) |
|
DL_TFC30 |
(TF0, TF0, TF0, TF10, TF0) |
|
DL_TFC31 |
(TF1, TF0, TF0, TF10, TF0) |
|
DL_TFC32 |
(TF2, TF1, TF1, TF10, TF0) |
|
DL_TFC33 |
(TF0, TF0, TF0, TF11, TF0) |
|
DL_TFC34 |
(TF1, TF0, TF0, TF11, TF0) |
|
DL_TFC35 |
(TF2, TF1, TF1, TF11, TF0) |
|
DL_TFC36 |
(TF0, TF0, TF0, TF12, TF0) |
|
DL_TFC37 |
(TF1, TF0, TF0, TF12, TF0) |
|
DL_TFC38 |
(TF2, TF1, TF1, TF12, TF0) |
|
DL_TFC39 |
(TF0, TF0, TF0, TF13, TF0) |
|
DL_TFC40 |
(TF1, TF0, TF0, TF13, TF0) |
|
DL_TFC41 |
(TF2, TF1, TF1, TF13, TF0) |
|
DL_TFC42 |
(TF0, TF0, TF0, TF14, TF0) |
|
DL_TFC43 |
(TF1, TF0, TF0, TF14, TF0) |
|
DL_TFC44 |
(TF2, TF1, TF1, TF14, TF0) |
|
DL_TFC45 |
(TF0, TF0, TF0, TF15, TF0) |
|
DL_TFC46 |
(TF1, TF0, TF0, TF15, TF0) |
|
DL_TFC47 |
(TF2, TF1, TF1, TF15, TF0) |
|
DL_TFC48 |
(TF0, TF0, TF0, TF16, TF0) |
|
DL_TFC49 |
(TF1, TF0, TF0, TF16, TF0) |
|
DL_TFC50 |
(TF2, TF1, TF1, TF16, TF0) |
|
DL_TFC51 |
(TF0, TF0, TF0, TF17, TF0) |
|
DL_TFC52 |
(TF1, TF0, TF0, TF17, TF0) |
|
DL_TFC53 |
(TF2, TF1, TF1, TF17, TF0) |
|
DL_TFC54 |
(TF0, TF0, TF0, TF18, TF0) |
|
DL_TFC55 |
(TF1, TF0, TF0, TF18, TF0) |
|
DL_TFC56 |
(TF2, TF1, TF1, TF18, TF0) |
|
DL_TFC57 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC58 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC59 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC60 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC61 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC61 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC63 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC64 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC65 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC66 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC67 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC68 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC69 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC70 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC71 |
(TF2, TF1, TF1, TF4, TF1) |
|
DL_TFC72 |
(TF0, TF0, TF0, TF5, TF1) |
|
DL_TFC73 |
(TF1, TF0, TF0, TF5, TF1) |
|
DL_TFC74 |
(TF2, TF1, TF1, TF5, TF1) |
|
DL_TFC75 |
(TF0, TF0, TF0, TF6, TF1) |
|
DL_TFC76 |
(TF1, TF0, TF0, TF6, TF1) |
|
DL_TFC77 |
(TF2, TF1, TF1, TF6, TF1) |
|
DL_TFC78 |
(TF0, TF0, TF0, TF7, TF1) |
|
DL_TFC79 |
(TF1, TF0, TF0, TF7, TF1) |
|
DL_TFC80 |
(TF2, TF1, TF1, TF7, TF1) |
|
DL_TFC81 |
(TF0, TF0, TF0, TF8, TF1) |
|
DL_TFC82 |
(TF1, TF0, TF0, TF8, TF1) |
|
DL_TFC83 |
(TF2, TF1, TF1, TF8, TF1) |
|
DL_TFC84 |
(TF0, TF0, TF0, TF9, TF1) |
|
DL_TFC85 |
(TF1, TF0, TF0, TF9, TF1) |
|
DL_TFC86 |
(TF2, TF1, TF1, TF9, TF1) |
|
DL_TFC87 |
(TF0, TF0, TF0, TF10, TF1) |
|
DL_TFC88 |
(TF1, TF0, TF0, TF10, TF1) |
|
DL_TFC89 |
(TF2, TF1, TF1, TF10, TF1) |
|
DL_TFC90 |
(TF0, TF0, TF0, TF11, TF1) |
|
DL_TFC91 |
(TF1, TF0, TF0, TF11, TF1) |
|
DL_TFC92 |
(TF2, TF1, TF1, TF11, TF1) |
|
DL_TFC93 |
(TF0, TF0, TF0, TF12, TF1) |
|
DL_TFC94 |
(TF1, TF0, TF0, TF12, TF1) |
|
DL_TFC95 |
(TF2, TF1, TF1, TF12, TF1) |
|
DL_TFC96 |
(TF0, TF0, TF0, TF13, TF1) |
|
DL_TFC97 |
(TF1, TF0, TF0, TF13, TF1) |
|
DL_TFC98 |
(TF2, TF1, TF1, TF13, TF1) |
|
DL_TFC99 |
(TF0, TF0, TF0, TF14, TF1) |
|
DL_TFC100 |
(TF1, TF0, TF0, TF14, TF1) |
|
DL_TFC101 |
(TF2, TF1, TF1, TF14, TF1) |
|
DL_TFC102 |
(TF0, TF0, TF0, TF15, TF1) |
|
DL_TFC103 |
(TF1, TF0, TF0, TF15, TF1) |
|
DL_TFC104 |
(TF2, TF1, TF1, TF15, TF1) |
|
DL_TFC105 |
(TF0, TF0, TF0, TF16, TF1) |
|
DL_TFC106 |
(TF1, TF0, TF0, TF16, TF1) |
|
DL_TFC107 |
(TF2, TF1, TF1, TF16, TF1) |
|
DL_TFC108 |
(TF0, TF0, TF0, TF17, TF1) |
|
DL_TFC109 |
(TF1, TF0, TF0, TF17, TF1) |
|
DL_TFC110 |
(TF2, TF1, TF1, TF17, TF1) |
|
DL_TFC111 |
(TF0, TF0, TF0, TF18, TF1) |
|
DL_TFC112 |
(TF1, TF0, TF0, TF18, TF1) |
|
DL_TFC113 |
(TF2, TF1, TF1, TF18, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC58 |
UL_TFC1, UL_TFC16 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC59 |
UL_TFC2, UL_TFC17 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3, DL_TFC60 |
UL_TFC3, UL_TFC18 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC3, UL_TFC15, UL_TFC18 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: No data RB6: No data RB7: No data RB8: 632 |
|
4 |
DL_TFC4, DL_TFC61 |
UL_TFC4, UL_TFC19 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC15, UL_TFC16, UL_TFC18 UL_TFC19 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 632 |
|
5 |
DL_TFC5, DL_TFC62 |
UL_TFC5, UL_TFC20 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
|
6 |
DL_TFC6, DL_TFC63 |
UL_TFC6, UL_TFC21 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC6, UL_TFC15, UL_TFC21 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 1272 |
|
7 |
DL_TFC7, DL_TFC64 |
UL_TFC7, UL_TFC22 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC15, UL_TFC16, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 |
|
8 |
DL_TFC8, DL_TFC65 |
UL_TFC8, UL_TFC23 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC15, UL_TFC17, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
|
9 |
DL_TFC9, DL_TFC66 |
UL_TFC9, UL_TFC24 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC9, UL_TFC15, UL_TFC24 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 2552 |
|
10 |
DL_TFC10, DL_TFC67 |
UL_TFC10, UL_TFC25 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16, UL_TFC24, UL_TFC25 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 2552 |
|
11 |
DL_TFC11, DL_TFC68 |
UL_TFC11, UL_TFC26 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC9 UL_TFC11, UL_TFC15, UL_TFC17, UL_TFC24, UL_TFC26 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
|
12 |
DL_TFC12, DL_TFC69 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 5112 |
|
13 |
DL_TFC13, DL_TFC70 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 5112 |
|
14 |
DL_TFC14, DL_TFC71 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 5112 |
|
15 |
DL_TFC15, DL_TFC72 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 7672 |
|
16 |
DL_TFC16, DL_TFC73 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 7672 |
|
17 |
DL_TFC17, DL_TFC74 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27 UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 7672 |
|
18 |
DL_TFC18, DL_TFC75 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 10232 |
|
19 |
DL_TFC19, DL_TFC76 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 10232 |
|
20 |
DL_TFC20, DL_TFC77 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 10232 |
|
21 |
DL_TFC21, DL_TFC78 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 12792 |
|
22 |
DL_TFC22, DL_TFC79 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 12792 |
|
23 |
DL_TFC23, DL_TFC80 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 12792 |
|
24 |
DL_TFC24, DL_TFC81 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 15352 |
|
25 |
DL_TFC25, DL_TFC82 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 15352 |
|
26 |
DL_TFC26, DL_TFC83 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 15352 |
|
27 |
DL_TFC27, DL_TFC84 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 17912 |
|
28 |
DL_TFC28, DL_TFC85 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 17912 |
|
29 |
DL_TFC29, DL_TFC86 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 17912 |
|
30 |
DL_TFC30, DL_TFC87 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 20472 |
|
31 |
DL_TFC31, DL_TFC88 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 20472 |
|
32 |
DL_TFC32, DL_TFC89 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 20472 |
|
33 |
DL_TFC33, DL_TFC90 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 23032 |
|
34 |
DL_TFC34, DL_TFC91 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 23032 |
|
35 |
DL_TFC35, DL_TFC92 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 23032 |
|
36 |
DL_TFC36, DL_TFC93 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 25592 |
|
37 |
DL_TFC37, DL_TFC94 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 25592 |
|
38 |
DL_TFC38, DL_TFC95 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 25592 |
|
39 |
DL_TFC39, DL_TFC96 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 28152 |
|
40 |
DL_TFC40, DL_TFC97 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 28152 |
|
41 |
DL_TFC41, DL_TFC98 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 28152 |
|
42 |
DL_TFC42, DL_TFC99 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 30712 |
|
43 |
DL_TFC43, DL_TFC100 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 30712 |
|
44 |
DL_TFC44, DL_TFC101 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 30712 |
|
45 |
DL_TFC45, DL_TFC102 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 33272 |
|
46 |
DL_TFC46, DL_TFC103 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 33272 |
|
47 |
DL_TFC47, DL_TFC104 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 33272 |
|
48 |
DL_TFC48, DL_TFC105 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 35832 |
|
49 |
DL_TFC49, DL_TFC106 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 35832 |
|
50 |
DL_TFC50, DL_TFC107 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 35832 |
|
51 |
DL_TFC51, DL_TFC108 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 38392 |
|
52 |
DL_TFC52, DL_TFC109 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 38392 |
|
53 |
DL_TFC53, DL_TFC110 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 38392 |
|
54 |
DL_TFC54, DL_TFC111 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: No data RB6: No data RB7: No data RB8: 40952 |
|
55 |
DL_TFC55, DL_TFC112 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 39 RB6: No data RB7: No data RB8: 40952 |
|
56 |
DL_TFC56, DL_TFC113 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC57, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 |
RB5: 81 RB6: 103 RB7: 60 RB8: 40952 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.44.2.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3: an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4: an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 5: an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 6: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 7: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 8: an RLC SDU on RB8 having the content equal to the first 632 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 9: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 10: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 11: an RLC SDU on RB8 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 12: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 13: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 14: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 15: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 16: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 17: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 18: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 19: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 20: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 21: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 22: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 23: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 24: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 25: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 26: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 27: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 28: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 29: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 30: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 31: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 32: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 33: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 34: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 35: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 36: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 37: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 38: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 39: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 40: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 41: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 42: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 43: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 44: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 45: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 46: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 47: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 48: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 49: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 50: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 51: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 52: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 53: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
– for sub-test 54: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 55: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 56: an RLC SDU on RB8 having the content equal to the first 2552 bits of the test data sent by the SS in downlink; an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.45 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL:57.6 DL:57.6 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.45.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.45.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.45.
18.1.2.45.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (57.6 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x576 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×576 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×576 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×576 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×576 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
UL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
UL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
UL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
UL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
UL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
UL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
UL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
UL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
UL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (57.6 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x576 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×576 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×576 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×576 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×576 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC16 |
UL_TFC1, DL_TFC16 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 576 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC17 |
UL_TFC2, DL_TFC17 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 576 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3, DL_TFC18 |
UL_TFC3,UL_TFC18 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC3, UL_TFC15, UL_TFC18 |
RB5: 39 RB6: 103 RB7: 60 RB8: 576 |
RB5: No data RB6: No data RB7: No data RB8: 576 |
|
4 |
DL_TFC4, DL_TFC19 |
UL_TFC4, DL_TFC19 |
DL_TFC0, DL_TFC15, , UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC3 UL_TFC4, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: 103 RB7: 60 RB8: 576 |
RB5: 39 RB6: No data RB7: No data RB8: 576 |
|
5 |
DL_TFC5, DL_TFC20 |
UL_TFC5, DL_TFC20 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20 |
RB5: 81 RB6: 103 RB7: 60 RB8: 576 |
RB5: 81 RB6: 103 RB7: 60 RB8: 576 |
|
6 |
DL_TFC6, DL_TFC21 |
UL_TFC6, DL_TFC21 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC6, UL_TFC15, UL_TFC21 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1152 |
RB5: No data RB6: No data RB7: No data RB8: 1152 |
|
7 |
DL_TFC7, DL_TFC22 |
UL_TFC7, DL_TFC22 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC15, UL_TFC16, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1152 |
RB5: 39 RB6: No data RB7: No data RB8: 1152 |
|
8 |
DL_TFC8, DL_TFC23 |
UL_TFC8, DL_TFC23 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC15, UL_TFC17, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1152 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1152 |
|
9 |
DL_TFC9, DL_TFC24 |
UL_TFC9, DL_TFC24 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC9, UL_TFC15, UL_TFC24 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1728 |
RB5: No data RB6: No data RB7: No data RB8: 1728 |
|
10 |
DL_TFC10, DL_TFC25 |
UL_TFC10,UL_TFC25 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16, UL_TFC24, UL_TFC25 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1728 |
RB5: 39 RB6: No data RB7: No data RB8: 1728 |
|
11 |
DL_TFC11,DL_TFC26 |
UL_TFC11,DL_TFC26 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17, UL_TFC24, UL_TFC26 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1728 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1728 |
|
12 |
DL_TFC12, DL_TFC27 |
UL_TFC12, DL_TFC27 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC26 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2304 |
RB5: No data RB6: No data RB7: No data RB8: 2304 |
|
13 |
DL_TFC13, DL_TFC28 |
UL_TFC13, DL_TFC28 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2304 |
RB5: 39 RB6: No data RB7: No data RB8: 2304 |
|
14 |
DL_TFC14, DL_TFC29 |
UL_TFC14, DL_TFC29 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2304 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2304 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.45.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified in the actual sub test.
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3, 6, 9 and 12: an RLC SDU on RB8 having the same content as sent by SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4, 7, 10 and 13: an RLC SDU on RB5 and RB8 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 5, 8, 11 and 14: an RLC SDU on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.46 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL:0 DL:64 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.46.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.46.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.46.
To be able to test the downlink radio bearer using the UE loopback function for the reference radio bearer UL:0 DL: 64 kbps,, the reference radio bearer configuration according to TS 34.108, clause 6.11.5.4.1.15.1 (Streaming/unknown/UL:14.4 kbps) is used in uplink.
18.1.2.46.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (14.4 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x576 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×576 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x320 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×320 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×320 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×320 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
8×320 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note 1) |
Test data size (bits) (note 1) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC16 |
UL_TFC1, UL_TFC7 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7 |
RB5: 39 RB6: 103 RB7: 60 RB8: 576 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC17 |
UL_TFC2, UL_TFC8 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8 |
RB5: 81 RB6: 103 RB7: 60 RB8: 576 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3, DL_TFC18 |
UL_TFC3, UL_TFC9 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 39 RB6: 103 RB7: 60 RB8: 576 |
RB5: No data RB6: No data RB7: No data RB8: 320 (note 2) |
|
4 |
DL_TFC4, DL_TFC19 |
UL_TFC4, UL_TFC10 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 576 |
RB5: 39 RB6: No data RB7: No data RB8: 320 (note 2) |
|
5 |
DL_TFC5, DL_TFC20 |
UL_TFC5, UL_TFC11 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 576 |
RB5: 81 RB6: 103 RB7: 60 RB8: 320 (note 2) |
|
6 |
DL_TFC6, DL_TFC21 |
UL_TFC3, UL_TFC9 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 39 RB6: 103 RB7: 60 RB8: 576 |
RB5: No data RB6: No data RB7: No data RB8: 640 (note 3) |
|
7 |
DL_TFC7, DL_TFC22 |
UL_TFC4, UL_TFC10 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 576 |
RB5: 39 RB6: No data RB7: No data RB8: 640 (note 3) |
|
8 |
DL_TFC8, DL_TFC23 |
UL_TFC5, UL_TFC11 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 576 |
RB5: 81 RB6: 103 RB7: 60 RB8: 640 (note 3) |
|
9 |
DL_TFC9, DL_TFC24 |
UL_TFC3, UL_TFC9 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 39 RB6: 103 RB7: 60 RB8: 576 |
RB5: No data RB6: No data RB7: No data RB8: 1280 (note 4) |
|
10 |
DL_TFC10, DL_TFC25 |
UL_TFC4, UL_TFC10 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9 UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 576 |
RB5: 39 RB6: No data RB7: No data RB8: 1280 (note 4) |
|
11 |
DL_TFC11, DL_TFC26 |
UL_TFC5, UL_TFC11 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 576 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1280 (note 4) |
|
12 |
DL_TFC12, DL_TFC27 |
UL_TFC3 UL_TFC9 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 39 RB6: 103 RB7: 60 RB8: 576 |
RB5: No data RB6: No data RB7: No data RB8: 2560 (note 5) |
|
13 |
DL_TFC13, DL_TFC28 |
UL_TFC4, UL_TFC10 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 576 |
RB5: 39 RB6: No data RB7: No data RB8: 2560 (note 5) |
|
14 |
DL_TFC14, DL_TFC29 |
UL_TFC5, UL_TFC11 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 576 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2560 (note 5) |
|
NOTE 1: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. NOTE 2: RB8: SS is using a DL RLC SDU with 320 bits as test data (=DL RLC PDU size for DL/TF1). UE will return one RLC PDU. SS creates an UL RLC SDU from the first 320 bits of the received RLC PDU. NOTE 3: RB8: SS is using a DL RLC SDU size of 640 bits as test data (=DL RLC PDU size for DL/TF2). UE will return one RLC PDU. SS creates an UL RLC SDU from the received RLC PDU. NOTE 4: RB8: SS is using a DL RLC SDU size of 1280 bits as test data (=DL RLC PDU size for DL/TF3). UE will return one RLC PDU. SS creates an UL RLC SDU from the received RLC PDU. NOTE 5: RB8: SS is using a DL RLC SDU size of 2560 bits as test data (=DL RLC PDU size for DL/TF4). UE will return one RLC PDU. SS creates an UL RLC SDU from the received RLC PDU. As the TTI for RB8 is the same for both downlink and uplink then UL RLC SDU size has been set to achieve UE to return one SDU per TTI, i.e. the UL RLC SDU size has been set equal to the uplink TFS size under test |
||||||
18.1.2.46.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified in the actual sub test.
3. At step 15 the UE shall return
– for sub-test 3, 6, 9 and 12: no data on RB5, RB6 and RB7.
– for sub-test 1, 4, 7, 10 and 13: an RLC SDU on RB5 having the same content as sent by the SS; and no data shall be received on RB6 or RB7.
– for sub-test 2, 5, 8, 11 and 14: an RLC SDU on each of RB5, RB6 and RB7 having the same content as sent by the SS.
– for sub-test 1 to 2: no data on RB8.
– for sub-test 3 to 5: an RLC SDU on RB8 having the same content as sent by the SS.
– for sub-test 6 to 14: an RLC SDU on RB5 having the same content as the first 576 bits of the RLC SDU sent by the SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.47 Void
18.1.2.48 Void
18.1.2.49 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Conversational / unknown / UL:64 DL:64 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.49.1 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 20 ms TTI
18.1.2.49.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.49.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.49 for the 20 ms TTI case.
18.1.2.49.1.3 Method of test
See 18.1.1.2 for test procedure.
Initial Conditions
The following RLC Info parameter values shall be set by the SS for the Conversational / unknown / UL:64 DL:64 kbps / CS RAB (RB8):
|
Uplink RLC |
|
|
TM RLC |
|
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Segmentation indication |
FALSE |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps, 20 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x640 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
2×640 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps, 20 ms TTI) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x640 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
2×640 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC7 |
UL_TFC1, DL_TFC7 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7 |
RB5: 39 RB6: 103 RB7: 60 RB8: 640 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC8 |
UL_TFC2, DL_TFC8 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8 |
RB5: 81 RB6: 103 RB7: 60 RB8: 640 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3, DL_TFC9 |
UL_TFC3, DL_TFC9 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 39 RB6: 103 RB7: 60 RB8: 640 |
RB5: No data RB6: No data RB7: No data RB8: 2×640 |
|
4 |
DL_TFC4, DL_TFC10 |
UL_TFC4, UL_TFC10 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 640 |
RB5: 39 RB6: No data RB7: No data RB8: 2×640 |
|
5 |
DL_TFC5, DL_TFC11 |
UL_TFC5, UL_TFC11 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 640 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2×640 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.49.1.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: RLC SDUs on RB5 having the same content as sent by the SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: RLC SDUs on RB5, RB6 and RB7 having the same content as sent by the SS; and no data shall be received on RB8.
– for sub-test 3: RLC SDUs on RB8 having the same content as sent by the SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4: RLC SDUs on RB5 and RB8 having the same content as sent by the SS; and no data shall be received on RB6 and RB7.
– for sub-test 5: RLC SDUs on RB5, RB6, RB7 and RB8 having the same content as sent by the SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.49.2 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 40 ms TTI
18.1.2.49.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.49.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.49 for the 40 ms TTI case.
18.1.2.49.2.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS for the Conversational / unknown / UL:64 DL:64 kbps / CS RAB (RB8):
|
Uplink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x640 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
4×640 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x640 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
4×640 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1,DL_TFC7 |
UL_TFC1,DL_TFC7 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7 |
RB5: 39 RB6: 103 RB7: 60 RB8: 640 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2,DL_TFC8 |
UL_TFC2,DL_TFC8 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8 |
RB5: 81 RB6: 103 RB7: 60 RB8: 640 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3,DL_TFC9 |
UL_TFC3,DL_TFC9 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 39 RB6: 103 RB7: 60 RB8: 640 |
RB5: No data RB6: No data RB7: No data RB8: 4×640 |
|
4 |
DL_TFC4,DL_TFC10 |
UL_TFC4,DL_TFC10 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 640 |
RB5: 39 RB6: No data RB7: No data RB8: 4×640 |
|
5 |
DL_TFC5,DL_TFC11 |
UL_TFC5,DL_TFC11 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 640 |
RB5: 81 RB6: 103 RB7: 60 RB8: 4×640 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. As the TTI for RB8 is the same for both downlink and uplink then UL RLC SDU size has been set to achieve UE to return one SDU per TTI, i.e. the UL RLC SDU size has been set equal to the uplink TB size. |
||||||
18.1.2.49.2.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual subtest.
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3: four RLC SDUs on RB8 having the same content as sent by SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4: an RLC SDU on RB5 and four RLC SDUs on RB8 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
- – for sub-test 5: an RLC SDU on RB5, RB6 and RB7; and four RLC SDUs on RB8 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.50 Conversational / unknown / UL:64 DL:64 kbps / CS RAB + Conversational / unknown / UL:64 DL:64 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.50.1 Conversational / unknown / UL:64 DL:64 kbps / CS RAB + Conversational / unknown / UL:64 DL:64 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH / 20 ms TTI
18.1.2.50.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.50.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.50 for the 20 ms TTI case.
18.1.2.50.1.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS for the Conversational / unknown / UL:64 DL:64 kbps / CS RAB (RB5 and RB6):
|
RB5 (64 kbps) |
RB6 (64 kbps) |
|
|
Uplink RLC |
||
|
TM RLC |
||
|
Segmentation indication |
FALSE |
FALSE |
|
Transmission RLC discard |
||
|
CHOICE SDU Discard Mode |
||
|
Timer based no explicit |
||
|
Timer_discard |
100ms |
100ms |
|
Downlink RLC |
||
|
TM RLC |
||
|
Segmentation indication |
FALSE |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
||
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
RB6 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x640 |
0x148 |
|
TF1, bits |
2×640 |
2×640 |
1×148 |
|
|
TF2, bits |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0) |
|
UL_TFC2 |
(TF0, TF1, TF0) |
|
UL_TFC3 |
(TF1, TF1, TF0) |
|
UL_TFC4 |
(TF0, TF0, TF1) |
|
UL_TFC5 |
(TF1, TF0, TF1) |
|
UL_TFC6 |
(TF0, TF1, TF1) |
|
UL_TFC7 |
(TF1, TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (64 kbps) |
RB6 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x640 |
0x148 |
|
TF1, bits |
2×640 |
2×640 |
1×148 |
|
|
TF2, bits |
N/A |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0) |
|
DL_TFC2 |
(TF0, TF1, TF0) |
|
DL_TFC3 |
(TF1, TF1, TF0) |
|
DL_TFC4 |
(TF0, TF0, TF1) |
|
DL_TFC5 |
(TF1, TF0, TF1) |
|
DL_TFC6 |
(TF0, TF1, TF1) |
|
DL_TFC7 |
(TF1, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1,DL_TFC5 |
UL_TFC1,DL_TFC5 |
DL_TFC0, DL_TFC4, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC4, UL_TFC5 |
RB5: 640 RB6: 640 |
RB5: 2×640 RB6: No data |
|
2 |
DL_TFC2,DL_TFC6 |
UL_TFC2,DL_TFC6 |
DL_TFC0, DL_TFC4, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC2, UL_TFC4, UL_TFC6 |
RB5: 640 RB6: 640 |
RB5: No data RB6: 2×640 |
|
3 |
DL_TFC3,DL_TFC7 |
UL_TFC3,DL_TFC7 |
DL_TFC0, DL_TFC4, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC7 |
RB5: 640 RB6: 640 |
RB5: 2×640 RB6: 2×640 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. As the TTI for RB5 and RB6 is the same for both downlink and uplink then UL RLC SDU size has been set to achieve UE to return one SDU per TTI, i.e. the UL RLC SDU size has been set equal to the uplink TB size. |
||||||
18.1.2.50.1.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual subtest.
3. At step 15 the UE shall return
– for sub-test 1: two RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 2: two RLC SDUs on RB6 having the same content as sent by SS; and no data shall be received on RB5.
– for sub-test 3: two RLC SDUs on RB5 and RB6 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.50.2 Conversational / unknown / UL:64 DL:64 kbps / CS RAB + Conversational / unknown / UL:64 DL:64 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH / 40 ms TTI
18.1.2.50.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.50.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.50 for the 40 ms TTI case.
18.1.2.50.2.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS for the Conversational / unknown / UL:64 DL:64 kbps / CS RAB (RB5 and RB6):
|
RB5 (64 kbps) |
RB6 (64 kbps) |
|
|
Uplink RLC |
||
|
TM RLC |
||
|
Segmentation indication |
FALSE |
FALSE |
|
Transmission RLC discard |
||
|
CHOICE SDU Discard Mode |
||
|
Timer based no explicit |
||
|
Timer_discard |
100ms |
100ms |
|
Downlink RLC |
||
|
TM RLC |
||
|
Segmentation indication |
FALSE |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
||
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
RB6 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x640 |
0x148 |
|
TF1, bits |
4×640 |
4×640 |
1×148 |
|
|
TF2, bits |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0) |
|
UL_TFC2 |
(TF0, TF1, TF0) |
|
UL_TFC3 |
(TF1, TF1, TF0) |
|
UL_TFC4 |
(TF0, TF0, TF1) |
|
UL_TFC5 |
(TF1, TF0, TF1) |
|
UL_TFC6 |
(TF0, TF1, TF1) |
|
UL_TFC7 |
(TF1, TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (64 kbps) |
RB6 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x640 |
0x148 |
|
TF1, bits |
4×640 |
4×640 |
1×148 |
|
|
TF2, bits |
N/A |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0) |
|
DL_TFC2 |
(TF0, TF1, TF0) |
|
DL_TFC3 |
(TF1, TF1, TF0) |
|
DL_TFC4 |
(TF0, TF0, TF1) |
|
DL_TFC5 |
(TF1, TF0, TF1) |
|
DL_TFC6 |
(TF0, TF1, TF1) |
|
DL_TFC7 |
(TF1, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC5 |
UL_TFC1, DL_TFC5 |
DL_TFC0, DL_TFC4, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC4, UL_TFC5 |
RB5: 640 RB6: 640 |
RB5: 4×640 RB6: No data |
|
2 |
DL_TFC2, DL_TFC6 |
UL_TFC2, DL_TFC6 |
DL_TFC0, DL_TFC4, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC2, UL_TFC4, UL_TFC6 |
RB5: 640 RB6: 640 |
RB5: No data RB6: 4×640 |
|
3 |
DL_TFC3, DL_TFC7 |
UL_TFC3, DL_TFC7 |
DL_TFC0, DL_TFC4, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC7 |
RB5: 640 RB6: 640 |
RB5: 4×640 RB6: 4×640 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. As the TTI for RB5 and RB6 is the same for both downlink and uplink then UL RLC SDU size has been set to achieve UE to return one SDU per TTI, i.e. the UL RLC SDU size has been set equal to the uplink TB size. |
||||||
18.1.2.50.2.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual subtest.
3. At step 15 the UE shall return
– for sub-test 1: four RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 2: four RLC SDUs on RB6 having the same content as sent by SS; and no data shall be received on RB5.
– for sub-test 3: four RLC SDUs on RB5 and RB6 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.51 Conversational / unknown / UL:64 DL:64 kbps / CS RAB + Interactive or background / UL:64 DL:64 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.51.1 Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 20 ms TTI + Interactive or background / UL:64 DL:64 kbps / PS RAB
18.1.2.51.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.51.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.51 for the 20 ms TTI case.
18.1.2.51.1.3 Method of test
See 18.1.1.2 for test procedure.
Initial Conditions
The following RLC Info parameter values shall be set by the SS for the Conversational / unknown / UL:64 DL:64 kbps / CS RAB (RB5):
|
RB5 (Conv. 64 kbps) |
|
|
Uplink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
Uplink TFS:
|
TFI |
RB5 (Conv. 64 kbps, 20 ms TTI) |
RB6 (I/B 64 kbps, 20 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x336 |
0x148 |
|
TF1, bits |
2×640 |
1×336 |
1×148 |
|
|
TF2, bits |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF0, TF1, TF0) |
|
UL_TFC2 |
(TF0, TF2, TF0) |
|
UL_TFC3 |
(TF0, TF3, TF0) |
|
UL_TFC4 |
(TF0, TF4, TF0) |
|
UL_TFC5 |
(TF1, TF0, TF0) |
|
UL_TFC6 |
(TF1, TF1, TF0) |
|
UL_TFC7 |
(TF1, TF2, TF0) |
|
UL_TFC8 |
(TF1, TF3, TF0) |
|
UL_TFC9 |
(TF1, TF4, TF0) |
|
UL_TFC10 |
(TF0, TF0, TF1) |
|
UL_TFC11 |
(TF0, TF1, TF1) |
|
UL_TFC12 |
(TF0, TF2, TF1) |
|
UL_TFC13 |
(TF0, TF3, TF1) |
|
UL_TFC14 |
(TF0, TF4, TF1) |
|
UL_TFC15 |
(TF1, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF1, TF1) |
|
UL_TFC17 |
(TF1, TF2, TF1) |
|
UL_TFC18 |
(TF1, TF3, TF1) |
|
UL_TFC19 |
(TF1, TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (Conv. 64 kbps, 20 ms TTI) |
RB6 (I/B 64 kbps, 20 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x336 |
0x148 |
|
TF1, bits |
2×640 |
1×336 |
1×148 |
|
|
TF2, bits |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
4×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF0, TF1, TF0) |
|
DL_TFC2 |
(TF0, TF2, TF0) |
|
DL_TFC3 |
(TF0, TF3, TF0) |
|
DL_TFC4 |
(TF0, TF4, TF0) |
|
DL_TFC5 |
(TF1, TF0, TF0) |
|
DL_TFC6 |
(TF1, TF1, TF0) |
|
DL_TFC7 |
(TF1, TF2, TF0) |
|
DL_TFC8 |
(TF1, TF3, TF0) |
|
DL_TFC9 |
(TF1, TF4, TF0) |
|
DL_TFC10 |
(TF0, TF0, TF1) |
|
DL_TFC11 |
(TF0, TF1, TF1) |
|
DL_TFC12 |
(TF0, TF2, TF1) |
|
DL_TFC13 |
(TF0, TF3, TF1) |
|
DL_TFC14 |
(TF0, TF4, TF1) |
|
DL_TFC15 |
(TF1, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF1, TF1) |
|
DL_TFC17 |
(TF1, TF2, TF1) |
|
DL_TFC18 |
(TF1, TF3, TF1) |
|
DL_TFC19 |
(TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC11 |
UL_TFC1, UL_TFC11 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC10, UL_TFC11 |
RB5: 640 RB6: 312 |
RB5: No data RB6: 312 |
|
2 |
DL_TFC2, DL_TFC12 |
UL_TFC2, UL_TFC12 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC10, UL_TFC12 |
RB5: 640 RB6: 632 |
RB5: No data RB6: 632 |
|
3 |
DL_TFC3, DL_TFC13 |
UL_TFC3, UL_TFC13 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC10, UL_TFC13 |
RB5: 640 RB6: 952 |
RB5: No data RB6: 952 |
|
4 |
DL_TFC4, DL_TFC14 |
UL_TFC4, UL_TFC14 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC10, UL_TFC14 |
RB5: 640 RB6: 1272 |
RB5: No data RB6: 1272 |
|
5 |
DL_TFC5, DL_TFC15 |
UL_TFC5, UL_TFC15 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC5, UL_TFC10, UL_TFC15 |
RB5: 640 RB6: 312 |
RB5: 2×640 RB6: No data |
|
6 |
DL_TFC6, DL_TFC16 |
UL_TFC6, UL_TFC16 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6, UL_TFC10, UL_TFC11, UL_TFC15, UL_TFC16 |
RB5: 640 RB6: 312 |
RB5: 2×640 RB6: 312 |
|
7 |
DL_TFC7, DL_TFC17 |
UL_TFC7, UL_TFC17 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7, UL_TFC10, UL_TFC12, UL_TFC15, UL_TFC17 |
RB5: 640 RB6: 632 |
RB5: 2×640 RB6: 632 |
|
8 |
DL_TFC8, DL_TFC18 |
UL_TFC8, UL_TFC18 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8, UL_TFC10, UL_TFC13, UL_TFC15, UL_TFC18 |
RB5: 640 RB6: 952 |
RB5: 2×640 RB6: 952 |
|
9 |
DL_TFC9, DL_TFC19 |
UL_TFC9, UL_TFC19 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9, UL_TFC10, UL_TFC14, UL_TFC15, UL_TFC19 |
RB5: 640 RB6: 1272 |
RB5: 2×640 RB6: 1272 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.51.1.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1, 2, 3, 4: RLC SDUs on RB6 having the same content as sent by the SS; and no data shall be received on RB5.
– for sub-test 5: RLC SDUs on RB5 having the same content as sent by the SS; and no data shall be received on RB6.
– for sub-test 6, 7, 8 and 9: RLC SDUs on RB5 and RB6 having the same content as sent by the SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.51.2 Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 40 ms TTI + Interactive or background / UL:64 DL:64 kbps / PS RAB
18.1.2.51.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.51.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.51 for the 40 ms TTI case.
18.1.2.51.2.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS for the Conversational / unknown / UL:64 DL:64 kbps / CS RAB (RB5):
|
RB5 (Conv. 64 kbps) |
|
|
Uplink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (Conv. 64 kbps) |
RB6 (I/B 64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x336 |
0x148 |
|
TF1, bits |
4×640 |
1×336 |
1×148 |
|
|
TF2, bits |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF0, TF1, TF0) |
|
UL_TFC2 |
(TF0, TF2, TF0) |
|
UL_TFC3 |
(TF0, TF3, TF0) |
|
UL_TFC4 |
(TF0, TF4, TF0) |
|
UL_TFC5 |
(TF1, TF0, TF0) |
|
UL_TFC6 |
(TF1, TF1, TF0) |
|
UL_TFC7 |
(TF1, TF2, TF0) |
|
UL_TFC8 |
(TF1, TF3, TF0) |
|
UL_TFC9 |
(TF1, TF4, TF0) |
|
UL_TFC10 |
(TF0, TF0, TF1) |
|
UL_TFC11 |
(TF0, TF1, TF1) |
|
UL_TFC12 |
(TF0, TF2, TF1) |
|
UL_TFC13 |
(TF0, TF3, TF1) |
|
UL_TFC14 |
(TF0, TF4, TF1) |
|
UL_TFC15 |
(TF1, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF1, TF1) |
|
UL_TFC17 |
(TF1, TF2, TF1) |
|
UL_TFC18 |
(TF1, TF3, TF1) |
|
UL_TFC19 |
(TF1, TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (Conv. 64 kbps) |
RB6 (I/B 64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x336 |
0x148 |
|
TF1, bits |
4×640 |
1×336 |
1×148 |
|
|
TF2, bits |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
4×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|---|---|
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF0, TF1, TF0) |
|
DL_TFC2 |
(TF0, TF2, TF0) |
|
DL_TFC3 |
(TF0, TF3, TF0) |
|
DL_TFC4 |
(TF0, TF4, TF0) |
|
DL_TFC5 |
(TF1, TF0, TF0) |
|
DL_TFC6 |
(TF1, TF1, TF0) |
|
DL_TFC7 |
(TF1, TF2, TF0) |
|
DL_TFC8 |
(TF1, TF3, TF0) |
|
DL_TFC9 |
(TF1, TF4, TF0) |
|
DL_TFC10 |
(TF0, TF0, TF1) |
|
DL_TFC11 |
(TF0, TF1, TF1) |
|
DL_TFC12 |
(TF0, TF2, TF1) |
|
DL_TFC13 |
(TF0, TF3, TF1) |
|
DL_TFC14 |
(TF0, TF4, TF1) |
|
DL_TFC15 |
(TF1, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF1, TF1) |
|
DL_TFC17 |
(TF1, TF2, TF1) |
|
DL_TFC18 |
(TF1, TF3, TF1) |
|
DL_TFC19 |
(TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC11 |
UL_TFC1, DL_TFC11 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC10, UL_TFC11 |
RB5: 640 RB6: 312 |
RB5: No data RB6: 312 |
|
2 |
DL_TFC2, DL_TFC12 |
UL_TFC2, DL_TFC12 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC10, UL_TFC12 |
RB5: 640 RB6: 632 |
RB5: No data RB6: 632 |
|
3 |
DL_TFC3, DL_TFC13 |
UL_TFC3, DL_TFC13 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC10, UL_TFC13 |
RB5: 640 RB6: 952 |
RB5: No data RB6: 952 |
|
4 |
DL_TFC4, DL_TFC14 |
UL_TFC4, DL_TFC14 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC10, UL_TFC14 |
RB5: 640 RB6: 1272 |
RB5: No data RB6: 1272 |
|
5 |
DL_TFC5, DL_TFC15 |
UL_TFC5, DL_TFC15 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC5, UL_TFC10, UL_TFC11, UL_TFC15, UL_TFC15 |
RB5: 640 RB6: 312 |
RB5: 4×640 RB6: No data |
|
6 |
DL_TFC6, DL_TFC16 |
UL_TFC6, DL_TFC16 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC6, UL_TFC10, UL_TFC16 |
RB5: 640 RB6: 312 |
RB5: 4×640 RB6: 312 |
|
7 |
DL_TFC7, DL_TFC17 |
UL_TFC7, DL_TFC17 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7, UL_TFC10, UL_TFC12, UL_TFC15, UL_TFC17 |
RB5: 640 RB6: 632 |
RB5: 4×640 RB6: 632 |
|
8 |
DL_TFC8, DL_TFC18 |
UL_TFC8, DL_TFC18 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8, UL_TFC10, UL_TFC13, UL_TFC15, UL_TFC18 |
RB5: 640 RB6: 952 |
RB5: 4×640 RB6: 952 |
|
9 |
DL_TFC9, DL_TFC19 |
UL_TFC9, DL_TFC19 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9, UL_TFC10, UL_TFC14, UL_TFC15, UL_TFC19 |
RB5: 640 RB6: 1272 |
RB5: 4×640 RB6: 1272 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. RB6: Test data size has been set to DL TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit). As the TTI for RB5 and RB6 is the same for both downlink and uplink then UL RLC SDU size has been set to achieve UE to return one SDU per TTI, i.e. the UL RLC SDU size for RB6 has been set equal to the uplink TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit).and .the UL RLC SDU size for RB5 has been set equal to the uplink TB size . |
||||||
18.1.2.51.2.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual subtest.
3. At step 15 the UE shall return
– for sub-test 1, 2, 3, 4: an RLC SDU on RB6 having the same content as sent by SS; and no data shall be received on RB5.
– for sub-test 5: two RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 6, 7, 8 and 9: two RLC SDUs on RB5 and one RLC SDU on RB6 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.52 Conversational / unknown / UL:64 DL:64 kbps / CS RAB + Interactive or background / UL:64 DL:128 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.52.1 Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 20 ms TTI + Interactive or background / UL:64 DL:128 kbps / PS RAB
18.1.2.52.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.52.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.52 for the 20 ms TTI case.
18.1.2.52.1.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS for the Conversational / unknown / UL:64 DL:64 kbps / CS RAB (RB5):
|
RB5 (Conv. 64 kbps) |
|
|
Uplink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (Conv. 64 kbps) |
RB6 (I/B 64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x336 |
0x148 |
|
TF1, bits |
2×640 |
1×336 |
1×148 |
|
|
TF2, bits |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|---|---|
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF0, TF1, TF0) |
|
UL_TFC2 |
(TF0, TF2, TF0) |
|
UL_TFC3 |
(TF0, TF3, TF0) |
|
UL_TFC4 |
(TF0, TF4, TF0) |
|
UL_TFC5 |
(TF1, TF0, TF0) |
|
UL_TFC6 |
(TF1, TF1, TF0) |
|
UL_TFC7 |
(TF1, TF2, TF0) |
|
UL_TFC8 |
(TF1, TF3, TF0) |
|
UL_TFC9 |
(TF1, TF4, TF0) |
|
UL_TFC10 |
(TF0, TF0, TF1) |
|
UL_TFC11 |
(TF0, TF1, TF1) |
|
UL_TFC12 |
(TF0, TF2, TF1) |
|
UL_TFC13 |
(TF0, TF3, TF1) |
|
UL_TFC14 |
(TF0, TF4, TF1) |
|
UL_TFC15 |
(TF1, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF1, TF1) |
|
UL_TFC17 |
(TF1, TF2, TF1) |
|
UL_TFC18 |
(TF1, TF3, TF1) |
|
UL_TFC19 |
(TF1, TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (Conv. 64 kbps) |
RB6 (I/B 128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x336 |
0x148 |
|
TF1, bits |
2×640 |
1×336 |
1×148 |
|
|
TF2, bits |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
8×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF0, TF1, TF0) |
|
DL_TFC2 |
(TF0, TF2, TF0) |
|
DL_TFC3 |
(TF0, TF3, TF0) |
|
DL_TFC4 |
(TF0, TF4, TF0) |
|
DL_TFC5 |
(TF1, TF0, TF0) |
|
DL_TFC6 |
(TF1, TF1, TF0) |
|
DL_TFC7 |
(TF1, TF2, TF0) |
|
DL_TFC8 |
(TF1, TF3, TF0) |
|
DL_TFC9 |
(TF1, TF4, TF0) |
|
DL_TFC10 |
(TF0, TF0, TF1) |
|
DL_TFC11 |
(TF0, TF1, TF1) |
|
DL_TFC12 |
(TF0, TF2, TF1) |
|
DL_TFC13 |
(TF0, TF3, TF1) |
|
DL_TFC14 |
(TF0, TF4, TF1) |
|
DL_TFC15 |
(TF1, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF1, TF1) |
|
DL_TFC17 |
(TF1, TF2, TF1) |
|
DL_TFC18 |
(TF1, TF3, TF1) |
|
DL_TFC19 |
(TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC11 |
UL_TFC1, DL_TFC11 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC10, UL_TFC11 |
RB5: 640 RB6: 312 |
RB5: No data RB6: 312 |
|
2 |
DL_TFC2, DL_TFC12 |
UL_TFC2, DL_TFC12 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC10, UL_TFC12 |
RB5: 640 RB6: 632 |
RB5: No data RB6: 632 |
|
3 |
DL_TFC3, DL_TFC13 |
UL_TFC3, DL_TFC13 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC10, UL_TFC13 |
RB5: 640 RB6: 952 |
RB5: No data RB6: 1272 |
|
4 |
DL_TFC4, DL_TFC14 |
UL_TFC4, DL_TFC14 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC10, UL_TFC14 |
RB5: 640 RB6: 1272 |
RB5: No data RB6: 2552 |
|
5 |
DL_TFC5, DL_TFC15 |
UL_TFC5, DL_TFC15 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC5, UL_TFC10, UL_TFC15 |
RB5: 640 RB6: 312 |
RB5: 2×640 RB6: No data |
|
6 |
DL_TFC6, DL_TFC16 |
UL_TFC6, DL_TFC16 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6, UL_TFC10, UL_TFC11, UL_TFC15, UL_TFC16 |
RB5: 640 RB6: 312 |
RB5: 2×640 RB6: 312 |
|
7 |
DL_TFC7, DL_TFC17 |
UL_TFC7, DL_TFC17 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7, UL_TFC10, UL_TFC12, UL_TFC15, UL_TFC17 |
RB5: 640 RB6: 632 |
RB5: 2×640 RB6: 632 |
|
8 |
DL_TFC8, DL_TFC18 |
UL_TFC8, DL_TFC18 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8, UL_TFC10, UL_TFC13, UL_TFC15, UL_TFC18 |
RB5: 640 RB6: 952 |
RB5: 2×640 RB6: 1272 |
|
9 |
DL_TFC9, DL_TFC19 |
UL_TFC9, DL_TFC19 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9, UL_TFC10, UL_TFC14, UL_TFC15, UL_TFC19 |
RB5: 640 RB6: 1272 |
RB5: 2×640 RB6: 2552 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. RB6: Test data size has been set to DL TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit). As the TTI for RB5 and RB6 is the same for both downlink and uplink then UL RLC SDU size has been set to achieve UE to return one SDU per TTI, i.e. the UL RLC SDU size for RB6 has been set equal to the uplink TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit).and .the UL RLC SDU size for RB5 has been set equal to the uplink TB size. |
||||||
18.1.2.52.1.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual subtest.
3. At step 15 the UE shall return
– for sub-test 1, 2, 3, 4: an RLC SDU on RB6 having the same content as sent by SS; and no data shall be received on RB5.
– for sub-test 5: two RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 6: two RLC SDUs on RB5 and one RLC SDU on RB6 having the same content as sent by SS.
– For sub-test 3: RLC SDU on RB6 having the content equal to the first 952 bits of the test data sent by the SS in downlink;
– For sub-test 4: RLC SDU on RB6 having the content equal to the first 1272 bits of the test data sent by the SS in downlink;
– for sub-test 8: an RLC SDU on RB6 having the content equal to the first 952 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS.
– for sub-test 9: an RLC SDU on RB6 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.52.2 Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 40 ms TTI + Interactive or background / UL:64 DL:128 kbps / PS RAB
18.1.2.52.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.52.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.51 for the 40 ms TTI case.
18.1.2.52.2.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS for the Conversational / unknown / UL:64 DL:64 kbps / CS RAB (RB5):
|
RB5 (Conv. 64 kbps) |
|
|
Uplink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (Conv. 64 kbps) |
RB6 (I/B 64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x336 |
0x148 |
|
TF1, bits |
4×640 |
1×336 |
1×148 |
|
|
TF2, bits |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF0, TF1, TF0) |
|
UL_TFC2 |
(TF0, TF2, TF0) |
|
UL_TFC3 |
(TF0, TF3, TF0) |
|
UL_TFC4 |
(TF0, TF4, TF0) |
|
UL_TFC5 |
(TF1, TF0, TF0) |
|
UL_TFC6 |
(TF1, TF1, TF0) |
|
UL_TFC7 |
(TF1, TF2, TF0) |
|
UL_TFC8 |
(TF1, TF3, TF0) |
|
UL_TFC9 |
(TF1, TF4, TF0) |
|
UL_TFC10 |
(TF0, TF0, TF1) |
|
UL_TFC11 |
(TF0, TF1, TF1) |
|
UL_TFC12 |
(TF0, TF2, TF1) |
|
UL_TFC13 |
(TF0, TF3, TF1) |
|
UL_TFC14 |
(TF0, TF4, TF1) |
|
UL_TFC15 |
(TF1, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF1, TF1) |
|
UL_TFC17 |
(TF1, TF2, TF1) |
|
UL_TFC18 |
(TF1, TF3, TF1) |
|
UL_TFC19 |
(TF1, TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (Conv. 64 kbps) |
RB6 (I/B 128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x336 |
0x148 |
|
TF1, bits |
4×640 |
1×336 |
1×148 |
|
|
TF2, bits |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
8×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF0, TF1, TF0) |
|
DL_TFC2 |
(TF0, TF2, TF0) |
|
DL_TFC3 |
(TF0, TF3, TF0) |
|
DL_TFC4 |
(TF0, TF4, TF0) |
|
DL_TFC5 |
(TF1, TF0, TF0) |
|
DL_TFC6 |
(TF1, TF1, TF0) |
|
DL_TFC7 |
(TF1, TF2, TF0) |
|
DL_TFC8 |
(TF1, TF3, TF0) |
|
DL_TFC9 |
(TF1, TF4, TF0) |
|
DL_TFC10 |
(TF0, TF0, TF1) |
|
DL_TFC11 |
(TF0, TF1, TF1) |
|
DL_TFC12 |
(TF0, TF2, TF1) |
|
DL_TFC13 |
(TF0, TF3, TF1) |
|
DL_TFC14 |
(TF0, TF4, TF1) |
|
DL_TFC15 |
(TF1, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF1, TF1) |
|
DL_TFC17 |
(TF1, TF2, TF1) |
|
DL_TFC18 |
(TF1, TF3, TF1) |
|
DL_TFC19 |
(TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1,DL_TFC11 |
UL_TFC1,DL_TFC11 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC10, UL_TFC11 |
RB5: 640 RB6: 312 |
RB5: No data RB6: 312 |
|
2 |
DL_TFC2,DL_TFC12 |
UL_TFC2,DL_TFC12 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC10, UL_TFC12 |
RB5: 640 RB6: 632 |
RB5: No data RB6: 632 |
|
3 |
DL_TFC3,DL_TFC13 |
UL_TFC3,DL_TFC13 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC10, UL_TFC13 |
RB5: 640 RB6: 952 |
RB5: No data RB6: 1272 |
|
4 |
DL_TFC4,DL_TFC14 |
UL_TFC4,DL_TFC14 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC10, UL_TFC14 |
RB5: 640 RB6: 1272 |
RB5: No data RB6: 2552 |
|
5 |
DL_TFC5,DL_TFC15 |
UL_TFC5,DL_TFC15 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC5, UL_TFC10, UL_TFC15 |
RB5: 640 RB6: 312 |
RB5: 4×640 RB6: No data |
|
6 |
DL_TFC6,DL_TFC16 |
UL_TFC6,DL_TFC16 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6, UL_TFC10, UL_TFC11, UL_TFC15, UL_TFC16 |
RB5: 640 RB6: 312 |
RB5: 4×640 RB6: 312 |
|
7 |
DL_TFC7,DL_TFC17 |
UL_TFC7,DL_TFC17 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7, UL_TFC10, UL_TFC12, UL_TFC15, UL_TFC17 |
RB5: 640 RB6: 632 |
RB5: 4×640 RB6: 632 |
|
8 |
DL_TFC8,DL_TFC18 |
UL_TFC8,DL_TFC18 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8, UL_TFC10, UL_TFC13, UL_TFC15, UL_TFC18 |
RB5: 640 RB6: 952 |
RB5: 4×640 RB6: 1272 |
|
9 |
DL_TFC9,DL_TFC19 |
UL_TFC9,DL_TFC19 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC15, UL_TFC9, UL_TFC10, UL_TFC14, UL_TFC15, UL_TFC19 |
RB5: 640 RB6: 1272 |
RB5: 4×640 RB6: 2552 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. RB6: Test data size has been set to DL TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit). As the TTI for RB5 and RB6 is the same for both downlink and uplink then UL RLC SDU size has been set to achieve UE to return one SDU per TTI, i.e. the UL RLC SDU size for RB6 has been set equal to the uplink TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit).and .the UL RLC SDU size for RB5 has been set equal to the uplink TB size . |
||||||
18.1.2.52.2.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual subtest.
3. At step 15 the UE shall return
– for sub-test 1, 2, 3, 4: an RLC SDU on RB6 having the same content as sent by SS; and no data shall be received on RB5.
– for sub-test 5: four RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 6: four RLC SDUs on RB5 and one RLC SDU on RB6 having the same content as sent by SS.
– For sub-test 3: RLC SDU on RB6 having the content equal to the first 652 bits of the test data sent by the SS in downlink;
– For sub-test 4: RLC SDU on RB6 having the content equal to the first 1272 bits of the test data sent by the SS in downlink;
– for sub-test 8: an RLC SDU on RB6 having the content equal to the first 652 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS.
– for sub-test 9: an RLC SDU on RB6 having the content equal to the first 1272 bits of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.53 Conversational / unknown / UL:64 DL:64 kbps / CS RAB + Interactive or background / UL:128 DL:128 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.53.1 Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 20 ms TTI + Interactive or background / UL:128 DL:128 kbps / PS RAB
18.1.2.53.1.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.53.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.53 for the 20 ms TTI case.
18.1.2.53.1.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS for the Conversational / unknown / UL:64 DL:64 kbps / CS RAB (RB5):
|
RB5 (Conv. 64 kbps) |
|
|
Uplink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (Conv. 64 kbps) |
RB6 (I/B 128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x336 |
0x148 |
|
TF1, bits |
2×640 |
1×336 |
1×148 |
|
|
TF2, bits |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
8×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF0, TF1, TF0) |
|
UL_TFC2 |
(TF0, TF2, TF0) |
|
UL_TFC3 |
(TF0, TF3, TF0) |
|
UL_TFC4 |
(TF0, TF4, TF0) |
|
UL_TFC5 |
(TF1, TF0, TF0) |
|
UL_TFC6 |
(TF1, TF1, TF0) |
|
UL_TFC7 |
(TF1, TF2, TF0) |
|
UL_TFC8 |
(TF1, TF3, TF0) |
|
UL_TFC9 |
(TF1, TF4, TF0) |
|
UL_TFC10 |
(TF0, TF0, TF1) |
|
UL_TFC11 |
(TF0, TF1, TF1) |
|
UL_TFC12 |
(TF0, TF2, TF1) |
|
UL_TFC13 |
(TF0, TF3, TF1) |
|
UL_TFC14 |
(TF0, TF4, TF1) |
|
UL_TFC15 |
(TF1, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF1, TF1) |
|
UL_TFC17 |
(TF1, TF2, TF1) |
|
UL_TFC18 |
(TF1, TF3, TF1) |
|
UL_TFC19 |
(TF1, TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (Conv. 64 kbps) |
RB6 (I/B 128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x336 |
0x148 |
|
TF1, bits |
2×640 |
1×336 |
1×148 |
|
|
TF2, bits |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
8×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|---|---|
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF0, TF1, TF0) |
|
DL_TFC2 |
(TF0, TF2, TF0) |
|
DL_TFC3 |
(TF0, TF3, TF0) |
|
DL_TFC4 |
(TF0, TF4, TF0) |
|
DL_TFC5 |
(TF1, TF0, TF0) |
|
DL_TFC6 |
(TF1, TF1, TF0) |
|
DL_TFC7 |
(TF1, TF2, TF0) |
|
DL_TFC8 |
(TF1, TF3, TF0) |
|
DL_TFC9 |
(TF1, TF4, TF0) |
|
DL_TFC10 |
(TF0, TF0, TF1) |
|
DL_TFC11 |
(TF0, TF1, TF1) |
|
DL_TFC12 |
(TF0, TF2, TF1) |
|
DL_TFC13 |
(TF0, TF3, TF1) |
|
DL_TFC14 |
(TF0, TF4, TF1) |
|
DL_TFC15 |
(TF1, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF1, TF1) |
|
DL_TFC17 |
(TF1, TF2, TF1) |
|
DL_TFC18 |
(TF1, TF3, TF1) |
|
DL_TFC19 |
(TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1,DL_TFC11 |
UL_TFC1,DL_TFC11 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC10, UL_TFC11 |
RB5: 640 RB6: 312 |
RB5: No data RB6: 312 |
|
2 |
DL_TFC2,DL_TFC12 |
UL_TFC2,DL_TFC12 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC10, UL_TFC12 |
RB5: 640 RB6: 632 |
RB5: No data RB6: 632 |
|
3 |
DL_TFC3,DL_TFC13 |
UL_TFC3,DL_TFC13 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC10, UL_TFC13 |
RB5: 640 RB6: 1272 |
RB5: No data RB6: 1272 |
|
4 |
DL_TFC4,DL_TFC14 |
UL_TFC4,DL_TFC14 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC10, UL_TFC14 |
RB5: 640 RB6: 2552 |
RB5: No data RB6: 2552 |
|
5 |
DL_TFC5,DL_TFC15 |
UL_TFC5,DL_TFC15 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC5, UL_TFC10, UL_TFC15 |
RB5: 640 RB6: 312 |
RB5: 2×640 RB6: No data |
|
6 |
DL_TFC6,DL_TFC16 |
UL_TFC6,DL_TFC16 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6, UL_TFC10, UL_TFC11, UL_TFC15, UL_TFC16 |
RB5: 640 RB6: 312 |
RB5: 2×640 RB6: 312 |
|
7 |
DL_TFC7,DL_TFC17 |
UL_TFC7,DL_TFC17 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7, UL_TFC10, UL_TFC12, UL_TFC15, UL_TFC17 |
RB5: 640 RB6: 632 |
RB5: 2×640 RB6: 632 |
|
8 |
DL_TFC8,DL_TFC18 |
UL_TFC8,DL_TFC18 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8, UL_TFC10, UL_TFC13, UL_TFC15, UL_TFC18 |
RB5: 640 RB6: 1272 |
RB5: 2×640 RB6: 1272 |
|
9 |
DL_TFC9,DL_TFC19 |
UL_TFC9,DL_TFC19 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9, UL_TFC10, UL_TFC14, UL_TFC15, UL_TFC19 |
RB5: 640 RB6: 2552 |
RB5: 2×640 RB6: 2552 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. RB6: Test data size has been set to DL TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit). As the TTI for RB5 and RB6 is the same for both downlink and uplink then UL RLC SDU size has been set to achieve UE to return one SDU per TTI, i.e. the UL RLC SDU size for RB6 has been set equal to the uplink TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit).and .the UL RLC SDU size for RB5 has been set equal to the uplink TFS size under test. |
||||||
18.1.2.53.1.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual subtest.
3. At step 15 the UE shall return
– for sub-test 1, 2, 3, 4: an RLC SDU on RB6 having the same content as sent by SS; and no data shall be received on RB5.
– for sub-test 5: two RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 6, 7, 8 and 9: two RLC SDUs on RB5 and one RLC SDU on RB6 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.53.2 Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 40 ms TTI + Interactive or background / UL:128 DL:128 kbps / PS RAB
18.1.2.53.2.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.53.2.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.53 for the 40 ms TTI case.
18.1.2.53.2.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS for the Conversational / unknown / UL:64 DL:64 kbps / CS RAB (RB5):
|
RB5 (Conv. 64 kbps) |
|
|
Uplink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (Conv. 64 kbps) |
RB6 (I/B 128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x336 |
0x148 |
|
TF1, bits |
4×640 |
1×336 |
1×148 |
|
|
TF2, bits |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
8×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF0, TF1, TF0) |
|
UL_TFC2 |
(TF0, TF2, TF0) |
|
UL_TFC3 |
(TF0, TF3, TF0) |
|
UL_TFC4 |
(TF0, TF4, TF0) |
|
UL_TFC5 |
(TF1, TF0, TF0) |
|
UL_TFC6 |
(TF1, TF1, TF0) |
|
UL_TFC7 |
(TF1, TF2, TF0) |
|
UL_TFC8 |
(TF1, TF3, TF0) |
|
UL_TFC9 |
(TF1, TF4, TF0) |
|
UL_TFC10 |
(TF0, TF0, TF1) |
|
UL_TFC11 |
(TF0, TF1, TF1) |
|
UL_TFC12 |
(TF0, TF2, TF1) |
|
UL_TFC13 |
(TF0, TF3, TF1) |
|
UL_TFC14 |
(TF0, TF4, TF1) |
|
UL_TFC15 |
(TF1, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF1, TF1) |
|
UL_TFC17 |
(TF1, TF2, TF1) |
|
UL_TFC18 |
(TF1, TF3, TF1) |
|
UL_TFC19 |
(TF1, TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (Conv. 64 kbps) |
RB6 (I/B 128 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x336 |
0x148 |
|
TF1, bits |
4×640 |
1×336 |
1×148 |
|
|
TF2, bits |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
8×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF0, TF1, TF0) |
|
DL_TFC2 |
(TF0, TF2, TF0) |
|
DL_TFC3 |
(TF0, TF3, TF0) |
|
DL_TFC4 |
(TF0, TF4, TF0) |
|
DL_TFC5 |
(TF1, TF0, TF0) |
|
DL_TFC6 |
(TF1, TF1, TF0) |
|
DL_TFC7 |
(TF1, TF2, TF0) |
|
DL_TFC8 |
(TF1, TF3, TF0) |
|
DL_TFC9 |
(TF1, TF4, TF0) |
|
DL_TFC10 |
(TF0, TF0, TF1) |
|
DL_TFC11 |
(TF0, TF1, TF1) |
|
DL_TFC12 |
(TF0, TF2, TF1) |
|
DL_TFC13 |
(TF0, TF3, TF1) |
|
DL_TFC14 |
(TF0, TF4, TF1) |
|
DL_TFC15 |
(TF1, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF1, TF1) |
|
DL_TFC17 |
(TF1, TF2, TF1) |
|
DL_TFC18 |
(TF1, TF3, TF1) |
|
DL_TFC19 |
(TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, UL_TFC11 |
UL_TFC1, UL_TFC11 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC10, UL_TFC11 |
RB5: 640 RB6: 312 |
RB5: No data RB6: 312 |
|
2 |
DL_TFC2, UL_TFC12 |
UL_TFC2, UL_TFC12 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC10, UL_TFC12 |
RB5: 640 RB6: 632 |
RB5: No data RB6: 632 |
|
3 |
DL_TFC3, UL_TFC13 |
UL_TFC3, UL_TFC13 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC10, UL_TFC13 |
RB5: 640 RB6: 1272 |
RB5: No data RB6: 1272 |
|
4 |
DL_TFC4, UL_TFC14 |
UL_TFC4, UL_TFC14 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC10, UL_TFC14 |
RB5: 640 RB6: 2552 |
RB5: No data RB6: 2552 |
|
5 |
DL_TFC5, UL_TFC15 |
UL_TFC5, UL_TFC15 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC5, UL_TFC10, UL_TFC15 |
RB5: 640 RB6: 312 |
RB5: 4×640 RB6: No data |
|
6 |
DL_TFC6, UL_TFC16 |
UL_TFC6, UL_TFC16 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC5 UL_TFC6, UL_TFC10, UL_TFC11, UL_TFC15, UL_TFC16 |
RB5: 640 RB6: 312 |
RB5: 4×640 RB6: 312 |
|
7 |
DL_TFC7, UL_TFC17 |
UL_TFC7, UL_TFC17 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7, UL_TFC10, UL_TFC12, UL_TFC15, UL_TFC17 |
RB5: 640 RB6: 632 |
RB5: 4×640 RB6: 632 |
|
8 |
DL_TFC8, UL_TFC18 |
UL_TFC8, UL_TFC18 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8, UL_TFC10, UL_TFC13, UL_TFC15, UL_TFC18 |
RB5: 4×640 RB6: 1272 |
RB5: 4×640 RB6: 1272 |
|
9 |
DL_TFC9, UL_TFC19 |
UL_TFC9, UL_TFC19 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9, UL_TFC10, UL_TFC14, UL_TFC15, UL_TFC19 |
RB5: 640 RB6: 2552 |
RB5: 4×640 RB6: 2552 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. RB6: Test data size has been set to DL TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit). As the TTI for RB5 and RB6 is the same for both downlink and uplink then UL RLC SDU size has been set to achieve UE to return one SDU per TTI, i.e. the UL RLC SDU size for RB6 has been set equal to the uplink TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit).and .the UL RLC SDU size for RB5 has been set equal to the uplink TFS size under test. |
||||||
18.1.2.53.2.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual subtest.
3. At step 15 the UE shall return
– for sub-test 1, 2, 3, 4: an RLC SDU on RB6 having the same content as sent by SS; and no data shall be received on RB5.
– for sub-test 5: four RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 6, 7, 8 and 9: four RLC SDUs on RB5 and one RLC SDU on RB6 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.54 Interactive or background / UL:64 DL:128 kbps / PS RAB + Streaming / unknown / UL:0 DL:64 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.54.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.54.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.54.
To be able to test the downlink radio bearer using the UE loopback function for the reference radio bearer UL:0 DL: 64 kbps, the reference radio bearer configuration according to TS 34.108, clause 6.11.5.4.1.15.1 (Streaming/unknown/UL:14.4 kbps) is used in uplink.
18.1.2.54.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (I/B 64 kbps) |
RB6 (Str. 14.4 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x576 |
0x148 |
|
TF1, bits |
1×336 |
1×576 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF0, TF0) |
|
UL_TFC3 |
(TF3, TF0, TF0) |
|
UL_TFC4 |
(TF4, TF0, TF0) |
|
UL_TFC5 |
(TF0, TF1, TF0) |
|
UL_TFC6 |
(TF1, TF1, TF0) |
|
UL_TFC7 |
(TF2, TF1, TF0) |
|
UL_TFC8 |
(TF3, TF1, TF0) |
|
UL_TFC9 |
(TF4, TF1, TF0) |
|
UL_TFC10 |
(TF0, TF0, TF1) |
|
UL_TFC11 |
(TF1, TF0, TF1) |
|
UL_TFC12 |
(TF2, TF0, TF1) |
|
UL_TFC13 |
(TF3, TF0, TF1) |
|
UL_TFC14 |
(TF4, TF0, TF1) |
|
UL_TFC15 |
(TF0, TF1, TF1) |
|
UL_TFC16 |
(TF1, TF1, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1) |
|
UL_TFC18 |
(TF3, TF1, TF1) |
|
UL_TFC19 |
(TF4, TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (I/B 128 kbps) |
RB6 (Str. 64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x320 |
0x148 |
|
TF1, bits |
1×336 |
1×320 |
1×148 |
|
|
TF2, bits |
2×336 |
2×320 |
N/A |
|
|
TF3, bits |
4×336 |
4×320 |
N/A |
|
|
TF4, bits |
8×336 |
8×320 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|---|---|
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF0, TF0) |
|
DL_TFC3 |
(TF3, TF0, TF0) |
|
DL_TFC4 |
(TF4, TF0, TF0) |
|
DL_TFC5 |
(TF0, TF1, TF0) |
|
DL_TFC6 |
(TF1, TF1, TF0) |
|
DL_TFC7 |
(TF2, TF1, TF0) |
|
DL_TFC8 |
(TF3, TF1, TF0) |
|
DL_TFC9 |
(TF4, TF1, TF0) |
|
DL_TFC10 |
(TF0, TF2, TF0) |
|
DL_TFC11 |
(TF1, TF2, TF0) |
|
DL_TFC12 |
(TF2, TF2, TF0) |
|
DL_TFC13 |
(TF3, TF2, TF0) |
|
DL_TFC14 |
(TF4, TF2, TF0) |
|
DL_TFC15 |
(TF0, TF3, TF0) |
|
DL_TFC16 |
(TF1, TF3, TF0) |
|
DL_TFC17 |
(TF2, TF3, TF0) |
|
DL_TFC18 |
(TF3, TF3, TF0) |
|
DL_TFC19 |
(TF4, TF3, TF0) |
|
DL_TFC20 |
(TF0, TF4, TF0) |
|
DL_TFC21 |
(TF1, TF4, TF0) |
|
DL_TFC22 |
(TF2, TF4, TF0) |
|
DL_TFC23 |
(TF3, TF4, TF0) |
|
DL_TFC24 |
(TF4, TF4, TF0) |
|
DL_TFC25 |
(TF0, TF0, TF1) |
|
DL_TFC26 |
(TF1, TF0, TF1) |
|
DL_TFC27 |
(TF2, TF0, TF1) |
|
DL_TFC28 |
(TF3, TF0, TF1) |
|
DL_TFC29 |
(TF4, TF0, TF1) |
|
DL_TFC30 |
(TF0, TF1, TF1) |
|
DL_TFC31 |
(TF1, TF1, TF1) |
|
DL_TFC32 |
(TF2, TF1, TF1) |
|
DL_TFC33 |
(TF3, TF1, TF1) |
|
DL_TFC34 |
(TF4, TF1, TF1) |
|
DL_TFC35 |
(TF0, TF2, TF1) |
|
DL_TFC36 |
(TF1, TF2, TF1) |
|
DL_TFC37 |
(TF2, TF2, TF1) |
|
DL_TFC38 |
(TF3, TF2, TF1) |
|
DL_TFC39 |
(TF4, TF2, TF1) |
|
DL_TFC40 |
(TF0, TF3, TF1) |
|
DL_TFC41 |
(TF1, TF3, TF1) |
|
DL_TFC42 |
(TF2, TF3, TF1) |
|
DL_TFC43 |
(TF3, TF3, TF1) |
|
DL_TFC44 |
(TF4, TF3, TF1) |
|
DL_TFC45 |
(TF0, TF4, TF1) |
|
DL_TFC46 |
(TF1, TF4, TF1) |
|
DL_TFC47 |
(TF2, TF4, TF1) |
|
DL_TFC48 |
(TF3, TF4, TF1) |
|
DL_TFC49 |
(TF4, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note 1) |
Test data size (bits) (note 1) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC26 |
UL_TFC1, UL_TFC11 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC10, UL_TFC11 |
RB5: 312 RB6: 576 |
RB5: 312 RB6: No data |
|
2 |
DL_TFC2, DL_TFC27 |
UL_TFC2, UL_TFC12 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC10, UL_TFC12 |
RB5: 632 RB6: 576 |
RB5: 632 RB6: No data |
|
3 |
DL_TFC3, DL_TFC28 |
UL_TFC3, UL_TFC13 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC10, UL_TFC13 |
RB5: 952 RB6: 576 |
RB5: 1272 RB6: No data |
|
4 |
DL_TFC4, DL_TFC29 |
UL_TFC4, UL_TFC14 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC10, UL_TFC14 |
RB5: 1272 RB6: 576 |
RB5: 2552 RB6: No data |
|
5 |
DL_TFC5, DL_TFC30 |
UL_TFC5, UL_TFC15 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC5, UL_TFC10, UL_TFC15 |
RB5: 312 RB6: 576 |
RB5: No data RB6: 320 (note 2) |
|
6 |
DL_TFC6, DL_TFC31 |
UL_TFC6, UL_TFC16 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6, UL_TFC10, UL_TFC11, UL_TFC15, UL_TFC16 |
RB5: 312 RB6: 576 |
RB5: 312 RB6: 320 (note 2) |
|
7 |
DL_TFC7, DL_TFC32 |
UL_TFC7, UL_TFC17 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC5 UL_TFC7, UL_TFC10, UL_TFC12, UL_TFC15, UL_TFC17 |
RB5: 632 RB6: 576 |
RB5: 632 RB6: 320 (note 2) |
|
8 |
DL_TFC8, DL_TFC33 |
UL_TFC8, UL_TFC18 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC5 UL_TFC8, UL_TFC10, UL_TFC13, UL_TFC15, UL_TFC18 |
RB5: 952 RB6: 576 |
RB5: 1272 RB6: 320 (note 2) |
|
9 |
DL_TFC9, DL_TFC34 |
UL_TFC9, UL_TFC19 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9, UL_TFC10, UL_TFC14, UL_TFC15, UL_TFC19 |
RB5: 1272 RB6: 576 |
RB5: 2552 RB6: 320 (note 2) |
|
10 |
DL_TFC10, DL_TFC35 |
UL_TFC5, UL_TFC15 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC5, UL_TFC10, UL_TFC15 |
RB5: 312 RB6: 576 |
RB5: No data RB6: 640 (note 3) |
|
11 |
DL_TFC11, DL_TFC36 |
UL_TFC6, UL_TFC16 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6, UL_TFC10, UL_TFC11, UL_TFC15, UL_TFC16 |
RB5: 312 RB6: 576 |
RB5: 312 RB6: 640 (note 3) |
|
12 |
DL_TFC12, DL_TFC37 |
UL_TFC7, UL_TFC17 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC5 UL_TFC7, UL_TFC10, UL_TFC12, UL_TFC15, UL_TFC17 |
RB5: 632 RB6: 576 |
RB5: 632 RB6: 640 (note 3) |
|
13 |
DL_TFC13, DL_TFC38 |
UL_TFC8, UL_TFC18 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8, UL_TFC10, UL_TFC13, UL_TFC15, UL_TFC18 |
RB5: 952 RB6: 576 |
RB5: 1272 RB6: 640 (note 3) |
|
14 |
DL_TFC14, DL_TFC39 |
UL_TFC9, UL_TFC19 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9, UL_TFC10, UL_TFC14, UL_TFC15, UL_TFC19 |
RB5: 1272 RB6: 576 |
RB5: 2552 RB6: 640 (note 3) |
|
15 |
DL_TFC15, DL_TFC40 |
UL_TFC5, UL_TFC15 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC5, UL_TFC10, UL_TFC15 |
RB5: 312 RB6: 576 |
RB5: No data RB6: 1280 (note 4) |
|
16 |
DL_TFC16, DL_TFC41 |
UL_TFC6, UL_TFC16 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6, UL_TFC10, UL_TFC11, UL_TFC15, UL_TFC16 |
RB5: 312 RB6: 576 |
RB5: 312 RB6: 1280 (note 4) |
|
17 |
DL_TFC17, DL_TFC42 |
UL_TFC7, UL_TFC17 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7, UL_TFC10, UL_TFC12, UL_TFC15, UL_TFC17 |
RB5: 632 RB6: 576 |
RB5: 632 RB6: 1280 (note 4) |
|
18 |
DL_TFC18, DL_TFC43 |
UL_TFC8, UL_TFC18 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC5, UL_TFC8, UL_TFC10, UL_TFC13, UL_TFC15, UL_TFC18 |
RB5: 952 RB6: 576 |
RB5: 1272 RB6: 1280 (note 4) |
|
19 |
DL_TFC19, DL_TFC44 |
UL_TFC9, UL_TFC19 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9, UL_TFC10, UL_TFC14, UL_TFC15, UL_TFC19 |
RB5: 1272 RB6: 576 |
RB5: 2552 RB6: 1280 (note 4) |
|
20 |
DL_TFC20, DL_TFC45 |
UL_TFC5, UL_TFC15 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC5, UL_TFC10, UL_TFC15 |
RB5: 312 RB6: 576 |
RB5: No data RB6: 2560 (note 5) |
|
21 |
DL_TFC21, DL_TFC46 |
UL_TFC6, UL_TFC16 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6, UL_TFC10, UL_TFC11, UL_TFC15, UL_TFC16 |
RB5: 312 RB6: 576 |
RB5: 312 RB6: 2560 (note 5) |
|
22 |
DL_TFC22, DL_TFC47 |
UL_TFC7, UL_TFC17 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC2, UL_TFC5, UL_TFC7, UL_TFC10, UL_TFC12, UL_TFC15, UL_TFC17 |
RB5: 632 RB6: 576 |
RB5: 632 RB6: 2560 (note 5) |
|
23 |
DL_TFC23, DL_TFC48 |
UL_TFC8, UL_TFC18 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC3, UL_TFC5 UL_TFC8, UL_TFC10, UL_TFC13, UL_TFC15, UL_TFC18 |
RB5: 952 RB6: 576 |
RB5: 1272 RB6: 2560 (note 5) |
|
24 |
DL_TFC24, DL_TFC49 |
UL_TFC9, UL_TFC19 |
DL_TFC0, DL_TFC25, UL_TFC0, UL_TFC10 |
UL_TFC0, UL_TFC4, UL_TFC5, UL_TFC9, UL_TFC10, UL_TFC14, UL_TFC15, UL_TFC19 |
RB5: 1272 RB6: 576 |
RB5: 2552 RB6: 2560 (note 5) |
|
NOTE 1: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. NOTE 2: RB6: SS is using a DL RLC SDU with 320 bits as test data (=DL RLC PDU size for DL/TF1). UE will return one RLC PDU. SS creates an UL RLC SDU from the first 320 bits of the received RLC PDU. NOTE 3: RB6: SS is using a DL RLC SDU size of 640 bits as test data (=DL RLC PDU size for DL/TF2). UE will return one RLC PDU. SS creates an UL RLC SDU from the received RLC PDU. NOTE 4: RB6: SS is using a DL RLC SDU size of 1280 bits as test data (=DL RLC PDU size for DL/TF3). UE will return one RLC PDU. SS creates an UL RLC SDU from the received RLC PDU. NOTE 5: RB6: SS is using a DL RLC SDU size of 2560 bits as test data (=DL RLC PDU size for DL/TF4). UE will return one RLC PDU. SS creates an UL RLC SDU from the received RLC PDU. RB5: Test data size has been set to DL TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit). As the TTI for RB5 and RB6 is the same for both downlink and uplink then UL RLC SDU size has been set to achieve UE to return one SDU per TTI, i.e. the UL RLC SDU size for RB5 has been set equal to the uplink TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit).and .the UL RLC SDU size for RB6 has been set equal to the uplink TFS size under test. |
||||||
18.1.2.54.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual subtest.
3. At step 15 the UE shall return
– for sub-test 1, 2, 6, 7, 11, 12, 16, 17, 21, 22: an RLC SDU on RB5 having the same content as sent by the SS.
– for sub-test 5, 10, 15 and 20: no data shall be received on RB5.
– for sub-test 1 to 4: no data shall be received on RB6.
– for sub-test 5 to 9: an RLC SDU on RB6 having the same content as sent by the SS.
– for sub-test 10, 11, 12, 15, 16, 17, 20, 21 and 22: an RLC SDU on RB5 having the same content as the first 576 bits of the RLC SDU sent by the SS.
– For sub-test 3,8,13,18,23: an RLC SDU on RB5 having the content equal to the first 952 bits of the test data sent by the SS in downlink;
– For sub-test 4,9,14,19,24: an RLC SDU on RB5 having the content equal to the first 1272 bits of the test data sent by the SS in downlink;
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.55 Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.55.1 Conformance requirement
See 18.1.2.4.1.1.
18.1.2.55.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.23a for the 40 ms TTI case.
18.1.2.55.3 Method of test
Uplink TFS:
|
TFI |
RB5 (8 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF0, TF1) |
|
UL_TFC3 |
(TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (8 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF0, TF1) |
|
DL_TFC3 |
(TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0,UL_TFC0 |
UL_TFC0, UL_TFC1 |
RB5: 312 |
RB5: 312 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.55.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
.3. At step 15 the UE shall return
– for sub-test: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.56 Interactive or background / UL:16 DL: 16 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.56.1 Conformance requirement
See 18.1.2.4.1.1.
18.1.2.56.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.23b for 40 ms TTI case.
18.1.2.56.3 Method of test
Uplink TFS:
|
TFI |
RB5 (16 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
n/a |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF0, TF1) |
|
UL_TFC4 |
(TF1, TF1) |
|
UL_TFC5 |
(TF2, TF1) |
Downlink TFS:
|
TFI |
RB5 (8 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
n/a |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF0, TF1) |
|
DL_TFC4 |
(TF1, TF1) |
|
DL_TFC5 |
(TF2, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1, DL_TFC4 |
UL_TFC1, UL_TFC4 |
DL_TFC0,DL_TFC3, UL_TFC0,UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2, DL_TFC5 |
UL_TFC2, UL_TFC5 |
DL_TFC0, DL_ TFC3, UL_TFC0, UL_ TFC3 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC5 |
RB5: 632 |
RB5:632 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.56.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
.3. At step 15 the UE shall return
– for sub-test 1 to 2: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.57 Interactive or background / UL:32 DL: 32 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.57.1 Conformance requirement
See 18.1.2.4.1.1.
18.1.2.57.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.23c for 40 ms TTI case.
18.1.2.57.3 Method of test
Uplink TFS:
|
TFI |
RB5 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
n/a |
|
|
TF3, bits |
3×336 |
n/a |
|
|
TF4, bits |
4×336 |
n/a |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
n/a |
|
|
TF3, bits |
3×336 |
n/a |
|
|
TF4, bits |
4×336 |
n/a |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF0, TF1) |
|
DL_TFC6 |
(TF1, TF1) |
|
DL_TFC7 |
(TF2, TF1) |
|
DL_TFC8 |
(TF3, TF1) |
|
DL_TFC9 |
(TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1, DL_TFC6 |
UL_TFC1, UL_TFC6 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2, DL_TFC7 |
UL_TFC2, UL_TFC7 |
DL_TFC0, DL_ TFC5, UL_TFC0, UL_ TFC5 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3, DL_TFC8 |
UL_TFC3, UL_TFC8 |
DL_TFC0, DL_ TFC5, UL_TFC0, UL_ TFC5 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_ TFC5, UL_TFC8 |
RB5: 952 |
RB5: 952 |
|
4 |
DL_TFC4, DL_TFC9 |
UL_TFC4, UL_TFC9 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 1272 |
RB5: 1272 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.57.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (3×336)
– for sub-test 4: RB5/TF4 (4×336)
.3. At step 15 the UE shall return
– for sub-test 1 to 4: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.
18.1.2.58 Interactive or background / UL:256 DL:64 kbps / PS RAB / 20 ms TTI+ UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.58.1 Conformance requirement
See 18.1.2.4.1.1.
18.1.2.58.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.62 for 20 ms TTI case.
18.1.2.58.3 Method of test
Uplink TFS:
|
TFI |
RB5 (256 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
n/a |
|
|
TF3, bits |
4×336 |
n/a |
|
|
TF4, bits |
8×336 |
n/a |
|
|
TF5, bits |
16×336 |
n/a |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF5, TF0) |
|
UL_TFC6 |
(TF0, TF1) |
|
UL_TFC7 |
(TF1, TF1) |
|
UL_TFC8 |
(TF2, TF1) |
|
UL_TFC9 |
(TF3, TF1) |
|
UL_TFC10 |
(TF4, TF1) |
|
UL_TFC11 |
(TF5, TF1) |
Downlink TFS:
|
TFI |
RB5 (64 kbps, 20 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
|
|
TF3, bits |
3×336 |
N/A |
|
|
TF4, bits |
4×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF0, TF1) |
|
DL_TFC6 |
(TF1, TF1) |
|
DL_TFC7 |
(TF2, TF1) |
|
DL_TFC8 |
(TF3, TF1) |
|
DL_TFC9 |
(TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1, DL_TFC6 |
UL_TFC1, UL_TFC7 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2, DL_TFC7 |
UL_TFC2, UL_TFC8 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8 |
RB5: 632 |
RB5: 632 |
|
3 |
DL_TFC3, DL_TFC8 |
UL_TFC3, UL_TFC9 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 1272 |
RB5: 952 |
|
4 |
DL_TFC4, DL_TFC9 |
UL_TFC4, UL_TFC10 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC4, UL_TFC6, UL_TFC10 |
RB5: 2552 |
RB5: 1272 |
|
5 |
DL_TFC4, DL_TFC9 |
UL_TFC5, UL_TFC11 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC5, UL_TFC6, UL_TFC11 |
RB5: 5112 |
RB5: 1272 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.58.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
– for sub-test 3: RB5/TF3 (4×336).
– for sub-test 4: RB5/TF4 (8×336).
– for sub-test 5: RB5/TF5 (16×336).
3. At step 15 the UE shall return
– for sub-test 1 to 6: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the S.
18.1.2.59 Streaming / unknown / UL:16 DL:32 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.59.1 Conformance requirement
See 18.1.2.4.1.1.
18.1.2.59.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.63 for 20 ms TTI case.
18.1.2.59.3 Method of test
Uplink TFS:
|
TFI |
RB5 (16 kbps TTI 20ms) |
RB6 (8 kbps TTI 40ms) ) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×336 |
1×148 |
|
Uplink TFCS:
|
TFCI |
(RB5,RB6 DCCH) |
|
UL_TFC0 |
(TF0, TF0,TF0) |
|
UL_TFC1 |
(TF1, TF0,TF0) |
|
UL_TFC2 |
(TF0, TF1,TF0) |
|
UL_TFC3 |
(TF1, TF1,TF0) |
|
UL_TFC4 |
(TF0, TF0,TF1) |
|
UL_TFC5 |
(TF1, TF0,TF1) |
|
UL_TFC6 |
(TF0, TF1,TF1) |
|
UL_TFC7 |
(TF1, TF1,TF1) |
Downlink TFS:
|
TFI |
RB5 (32 kbps TTI 20ms) |
RB6 (8 kbps TTI 40ms) ) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5,RB6 DCCH) |
|
DL_TFC0 |
(TF0, TF0,TF0) |
|
DL_TFC1 |
(TF1, TF0,TF0) |
|
DL_TFC2 |
(TF2, TF0,TF0) |
|
DL_TFC3 |
(TF0, TF1,TF0) |
|
DL_TFC4 |
(TF1, TF1,TF0) |
|
DL_TFC5 |
(TF2, TF1,TF0) |
|
DL_TFC6 |
(TF0, TF0,TF1) |
|
DL_TFC7 |
(TF1, TF0,TF1) |
|
DL_TFC8 |
(TF2, TF0,TF1) |
|
DL_TFC9 |
(TF0, TF1,TF1) |
|
DL_TFC10 |
(TF1, TF1,TF1) |
|
DL_TFC11 |
(TF2, TF1,TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1,DL_TFC7 |
UL_TFC1,UL_TFC5 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC5 |
RB5: 312 RB6: No data |
RB5: 312 RB6: No data |
|
2 |
DL_TFC2,DL_TFC8 |
UL_TFC1,UL_TFC5 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC5 |
RB5: 312 RB6: No data |
RB5: 632 RB6: No data |
|
3 |
DL_TFC3,DL_TFC9 |
UL_TFC2,UL_TFC6 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC6 |
RB5: No data RB6: 312 |
RB5: No data RB6: 312 |
|
4 |
DL_TFC4 DL_TFC10 |
UL_TFC3,UL_TFC7 |
DL_TFC0, DL_TFC1, DL_TFC3, DL_TFC6, DL_TFC7, DL_TFC9,UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC5, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC7 |
RB5: 312 RB6: 312 |
RB5: 312 RB6: 312 |
|
5 |
DL_TFC5,DL_TFC11 |
UL_TFC3,UL_TFC7 |
DL_TFC0, DL_TFC2, DL_TFC3, DL_TFC6, DL_TFC8, DL_TFC9, UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC5, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC7 |
RB5: 312 RB6: 312 |
RB5: 632 RB6: 312 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.59.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6;.
– for sub-test 2: 2 RLC SDU on RB5 having the content equal to the first 312 bits of the test data sent by sent by SS; and no data shall be received on RB6.
– for sub-test 3: an RLC SDUs on RB6 having the same content as sent by SS; and no data shall be received on RB5.
– for sub-test 4: 1 RLC SDU on RB5 and an RLC SDUs on RB6 having the same content as sent by SS..
– for sub-test 5: 2 RLC SDU on RB5 having the content equal to the first 312 bits of the test data sent by sent by SS and an RLC SDUs on RB6 having the same content as sent by SS.
18.1.2.60 Streaming / unknown / UL:16 DL:64 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.60.1 Conformance requirement
See 18.1.2.4.1.1.
18.1.2.60.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.58.
18.1.2.60.3 Method of test
Uplink TFS:
|
TFI |
RB5 (16 kbps TTI 20ms) |
RB6 (8 kbps TTI 40ms) ) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×336 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5,RB6 DCCH) |
|
UL_TFC0 |
(TF0, TF0,TF0) |
|
UL_TFC1 |
(TF1, TF0,TF0) |
|
UL_TFC2 |
(TF0, TF1,TF0) |
|
UL_TFC3 |
(TF1, TF1,TF0) |
|
UL_TFC4 |
(TF0, TF0,TF1) |
|
UL_TFC5 |
(TF1, TF0,TF1) |
|
UL_TFC6 |
(TF0, TF1,TF1) |
|
UL_TFC7 |
(TF1, TF1,TF1) |
Downlink TFS:
|
TFI |
RB5 (64 kbps TTI 40ms) |
RB6 (8 kbps TTI 40ms)) |
DCCH |
|
|
TFS |
TF0, bits |
0x656 |
0x336 |
0x148 |
|
TF1, bits |
1×656 |
1×336 |
1×148 |
|
|
TF2, bits |
2×656 |
N/A |
N/A |
|
|
TF3, bits |
4×656 |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5,RB6 DCCH) |
|
DL_TFC0 |
(TF0,TF0,TF0) |
|
DL_TFC1 |
(TF1,TF0,TF0) |
|
DL_TFC2 |
(TF2,TF0,TF0) |
|
DL_TFC3 |
(TF3,TF0,TF0) |
|
DL_TFC4 |
(TF0,TF1,TF0) |
|
DL_TFC5 |
(TF1,TF1,TF0) |
|
DL_TFC6 |
(TF2,TF1,TF0) |
|
DL_TFC7 |
(TF3,TF1,TF0) |
|
DL_TFC8 |
(TF0,TF0,TF1) |
|
DL_TFC9 |
(TF1,TF0,TF1) |
|
DL_TFC10 |
(TF2,TF0,TF1) |
|
DL_TFC11 |
(TF3,TF0,TF1) |
|
DL_TFC12 |
(TF0,TF1,TF1) |
|
DL_TFC13 |
(TF1,TF1,TF1) |
|
DL_TFC14 |
(TF2,TF1,TF1) |
|
DL_TFC15 |
(TF3,TF1,TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1,DL_TFC9 |
UL_TFC1,UL_TFC5 |
DL_TFC0, DL_TFC8, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC5 |
RB5: 312 RB6: No data |
RB5: 632 RB6: No data |
|
2 |
DL_TFC2,DL_TFC10 |
UL_TFC1,UL_TFC5 |
DL_TFC0, DL_TFC8, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC5 |
RB5: 312 RB6: No data |
RB5: 1272 RB6: No data |
|
3 |
DL_TFC3,DL_TFC11 |
UL_TFC1,UL_TFC5 |
DL_TFC0, DL_TFC8, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC5 |
RB5: 312 RB6: No data |
RB5: 2552 RB6: No data |
|
4 |
DL_TFC4 DL_TFC12 |
UL_TFC2,UL_TFC6 |
DL_TFC0, DL_TFC8, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC6 |
RB5: No data RB6: 312 |
RB5: No data RB6: 312 |
|
5 |
DL_TFC5 DL_TFC13 |
UL_TFC3, UL_TFC7 |
DL_TFC0, DL_TFC1, DL_TFC4, DL_TFC8, DL_TFC9, DL_TFC12, UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC5, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC7 |
RB5: 312 RB6: 312 |
RB5: 632 RB6: 312 |
|
6 |
DL_TFC6 DL_TFC14 |
UL_TFC3, UL_TFC7 |
DL_TFC0, DL_TFC2, DL_TFC4, DL_TFC8, DL_TFC10, DL_TFC12, UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC5, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC7 |
RB5: 312 RB6: 312 |
RB5: 1272 RB6: 312 |
|
7 |
DL_TFC7 DL_TFC15 |
UL_TFC3, UL_TFC7 |
DL_TFC0, DL_TFC3, DL_TFC4, DL_TFC8, DL_TFC11, DL_TFC12, UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC5, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC7 |
RB5: 312 RB6: 312 |
RB5: 2552 RB6: 312 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.60.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RLC SDUs on RB5 having the content equal to the first 312 bits of the test data sent by the SS in downlink; and no data shall be received on RB6.
– for sub-test 2: RLC SDUs on RB5 having the content equal to the first 312 bits of the test data sent by the SS in downlink; and no data shall be received on RB6.
– for sub-test 3: RLC SDUs on RB5 having the content equal to the first 312 bits of the test data sent by the SS in downlink; and no data shall be received on RB6.
– for sub-test 4: RLC SDU on RB6 having the same content as sent by SS; and no data shall be received on RB5.
– for sub-test 5 -7 : RLC SDU on RB6 having the same content as sent by SS; RLC SDUs on RB5 having the content equal to the first 312 bits of the test data sent by the SS in downlink.
18.1.2.61 Streaming / unknown / UL:16 DL:128 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.61.1 Conformance requirement
See 18.1.2.4.1.1.
18.1.2.61.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.64.
18.1.2.61.3 Method of test
Uplink TFS:
|
TFI |
RB5 (16 kbps TTI 20ms) |
RB6 (8 kbps TTI 40ms) ) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×336 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5,RB6 DCCH) |
|
UL_TFC0 |
(TF0, TF0,TF0) |
|
UL_TFC1 |
(TF1, TF0,TF0) |
|
UL_TFC2 |
(TF0, TF1,TF0) |
|
UL_TFC3 |
(TF1, TF1,TF0) |
|
UL_TFC4 |
(TF0, TF0,TF1) |
|
UL_TFC5 |
(TF1, TF0,TF1) |
|
UL_TFC6 |
(TF0, TF1,TF1) |
|
UL_TFC7 |
(TF1, TF1,TF1) |
Downlink TFS:
|
TFI |
RB5 (128 kbps TTI 20ms) |
RB6 (8 kbps TTI 40ms)) |
DCCH |
|
|
TFS |
TF0, bits |
0x656 |
0x336 |
0x148 |
|
TF1, bits |
1×656 |
1×336 |
1×148 |
|
|
TF2, bits |
2×656 |
N/A |
N/A |
|
|
TF3, bits |
3×656 |
N/A |
N/A |
|
|
TF4, bits |
4×656 |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5,RB6 DCCH) |
|
DL_TFC0 |
(TF0, TF0,TF0) |
|
DL_TFC1 |
(TF1, TF0,TF0) |
|
DL_TFC2 |
(TF2, TF0,TF0) |
|
DL_TFC3 |
(TF3,TF0,TF0) |
|
DL_TFC4 |
(TF4,TF1,TF0) |
|
DL_TFC5 |
(TF0,TF1,TF0) |
|
DL_TFC6 |
(TF1,TF1,TF0) |
|
DL_TFC7 |
(TF2,TF1,TF0) |
|
DL_TFC8 |
(TF3,TF1,TF0) |
|
DL_TFC9 |
(TF4,TF1,TF0) |
|
DL_TFC10 |
(TF0,TF0,TF1) |
|
DL_TFC11 |
(TF1,TF0,TF1) |
|
DL_TFC12 |
(TF2,TF0,TF1) |
|
DL_TFC13 |
(TF3,TF0,TF1) |
|
DL_TFC14 |
(TF4,TF0,TF1) |
|
DL_TFC15 |
(TF0,TF1,TF1) |
|
DL_TFC16 |
(TF1,TF1,TF1) |
|
DL_TFC17 |
(TF2,TF1,TF1) |
|
DL_TFC18 |
(TF3,TF1,TF1) |
|
DL_TFC19 |
(TF4,TF1,TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1,DL_TFC9 |
UL_TFC1,UL_TFC5 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC4, |
RB5: 312 RB6: No data |
RB5: 632 RB6: No data |
|
2 |
DL_TFC2,DL_TFC10 |
UL_TFC1,UL_TFC5 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC4, UL_TFC5 |
RB5: 312 RB6: No data |
RB5: 1272 RB6: No data |
|
3 |
DL_TFC3,DL_TFC11 |
UL_TFC1,UL_TFC5 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC4, UL_TFC5 |
RB5: 312 RB6: No data |
RB5: 1912 RB6: No data |
|
4 |
DL_TFC4 DL_TFC14 |
UL_TFC1,UL_TFC5 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC4, UL_TFC5 |
RB5: 312 RB6: No data |
RB5: 2552 RB6: No data |
|
5 |
DL_TFC5 DL_TFC15 |
UL_TFC2,UL_TFC6 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC2, UL_TFC4, UL_TFC6 |
RB5: No data RB6: 312 |
RB5: No data RB6: 312 |
|
6 |
DL_TFC6 DL_TFC16 |
UL_TFC3 UL_TFC7 |
DL_TFC0, DL_TFC1, DL_TFC5, DL_TFC10, DL_TFC11, DL_TFC15, UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC5, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC7 |
RB5: 312 RB6: 312 |
RB5: 632 RB6: 312 |
|
7 |
DL_TFC7 DL_TFC17 |
UL_TFC3, UL_TFC7 |
DL_TFC0, DL_TFC2, DL_TFC5, DL_TFC10, DL_TFC12, DL_TFC15, UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC5, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC7, |
RB5: 312 RB6: 312 |
RB5: 1272 RB6: 312 |
|
8 |
DL_TFC8 DL_TFC18 |
UL_TFC3, UL_TFC7 |
DL_TFC0, DL_TFC3, DL_TFC5, DL_TFC10, DL_TFC13, DL_TFC15, UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC5, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC7 |
RB5: 312 RB6: 312 |
RB5: 1912 RB6: 312 |
|
9 |
DL_TFC9 DL_TFC19 |
UL_TFC3, UL_TFC7 |
DL_TFC0, DL_TFC4, DL_TFC5, DL_TFC10, DL_TFC14, DL_TFC15, UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC4, UL_TFC5, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC7 |
RB5: 312 RB6: 312 |
RB5: 2552 RB6: 312 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.61.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1-4 : RLC SDUs on RB5 having the content equal to the first 312 bits of the test data sent by the SS in downlink; and no data shall be received on RB6.
– for sub-test 5: RLC SDU on RB6 having the same content as sent by SS; and no data shall be received on RB5.
– for sub-test 6 – 9: RLC SDUs on RB5 having the content equal to the first 312 bits of the test data sent by the SS in downlink and RLC SDU on RB6 having the same content as sent by SS.
18.1.2.62 Streaming / unknown / UL:32 DL:256 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.62.1 Conformance requirement
See 18.1.2.4.1.1.
18.1.2.62.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.65 for 20 ms TTI case.
18.1.2.62.3 Method of test
Uplink TFS:
|
TFI |
RB5 (32 kbps TTI 20ms) |
RB6 (8 kbps TTI 40ms)) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5,RB6 DCCH) |
|
UL_TFC0 |
(TF0, TF0,TF0) |
|
UL_TFC1 |
(TF1, TF0,TF0) |
|
UL_TFC2 |
(TF2, TF0,TF0) |
|
UL_TFC3 |
(TF0,TF1,TF0) |
|
UL_TFC4 |
(TF1,TF1,TF0) |
|
UL_TFC5 |
(TF2,TF1,TF0) |
|
UL_TFC6 |
(TF0,TF0,TF1) |
|
UL_TFC7 |
(TF1,TF0,TF1) |
|
UL_TFC8 |
(TF2,TF0,TF1) |
|
UL_TFC9 |
(TF0,TF1,TF1) |
|
UL_TFC10 |
(TF1,TF1,TF1) |
|
UL_TFC11 |
(TF2,TF1,TF1) |
Downlink TFS:
|
TFI |
RB5 (256 kbps TTI 10ms) |
RB6 (8 kbps TTI 40ms) ) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
N/A |
|
|
TF3, bits |
4×336 |
N/A |
N/A |
|
|
TF4, bits |
8×336 |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5,RB6 DCCH) |
|
DL_TFC0 |
(TF0, TF0,TF0) |
|
DL_TFC1 |
(TF1, TF0,TF0) |
|
DL_TFC2 |
(TF2, TF0,TF0) |
|
DL_TFC3 |
(TF3,TF0,TF0) |
|
DL_TFC4 |
(TF4,TF0,TF0) |
|
DL_TFC5 |
(TF0,TF1,TF0) |
|
DL_TFC6 |
(TF1,TF1,TF0) |
|
DL_TFC7 |
(TF2,TF1,TF0) |
|
DL_TFC8 |
(TF3,TF1,TF0) |
|
DL_TFC9 |
(TF4,TF1,TF0) |
|
DL_TFC10 |
(TF0,TF0,TF1) |
|
DL_TFC11 |
(TF1,TF0,TF1) |
|
DL_TFC12 |
(TF2,TF0,TF1) |
|
DL_TFC13 |
(TF3,TF0,TF1) |
|
DL_TFC14 |
(TF4,TF0,TF1) |
|
DL_TFC15 |
(TF0,TF1,TF1) |
|
DL_TFC16 |
(TF1,TF1,TF1) |
|
DL_TFC17 |
(TF2,TF1,TF1) |
|
DL_TFC18 |
(TF3,TF1,TF1) |
|
DL_TFC19 |
(TF4,TF1,TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1,DL_TFC11 |
UL_TFC1,UL_TFC7 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7 |
RB5: 312 RB6: No data |
RB5: 312 RB6: No data |
|
2 |
DL_TFC2,DL_TFC12 |
UL_TFC2,UL_TFC8 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8 |
RB5: 632 RB6: No data |
RB5: 632 RB6: No data |
|
3 |
DL_TFC3,DL_TFC13 |
UL_TFC2,UL_TFC8 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8 |
RB5: 632 RB6: No data |
RB5: 1272 RB6: No data |
|
4 |
DL_TFC4 DL_TFC14 |
UL_TFC2,UL_TFC8 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8 |
RB5: 632 RB6: No data |
RB5: 2552 RB6: No data |
|
5 |
DL_TFC5 DL_TFC15 |
UL_TFC3,UL_TFC9 |
DL_TFC0, DL_TFC10, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: No data RB6: 312 |
RB5: No data RB6: 312 |
|
6 |
DL_TFC6 DL_TFC16 |
UL_TFC4 UL_TFC10 |
DL_TFC0, DL_TFC1, DL_TFC5, DL_TFC10, DL_TFC11, DL_TFC15, UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC6, UL_TFC7, UL_TFC9 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 312 RB6: 312 |
RB5: 312 RB6: 312 |
|
7 |
DL_TFC7 DL_TFC17 |
UL_TFC4 UL_TFC10 |
DL_TFC0, DL_TFC2, DL_TFC5, DL_TFC10, DL_TFC12, DL_TFC15, UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC6, UL_TFC7, UL_TFC9 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 312 RB6: 312 |
RB5: 632 RB6: 312 |
|
8 |
DL_TFC8 DL_TFC18 |
UL_TFC4 UL_TFC10 |
DL_TFC0, DL_TFC3, DL_TFC5, DL_TFC10, DL_TFC13, DL_TFC15, UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC6, UL_TFC7, UL_TFC9 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 312 RB6: 312 |
RB5: 1272 RB6: 312 |
|
9 |
DL_TFC9 DL_TFC19 |
UL_TFC4 UL_TFC10 |
DL_TFC0, DL_TFC4, DL_TFC5, DL_TFC10, DL_TFC14, DL_TFC15, UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC6, UL_TFC7, UL_TFC9 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 312 RB6: 312 |
RB5: 2552 RB6: 312 |
|
10 |
DL_TFC9 DL_TFC19 |
UL_TFC5 UL_TFC11 |
DL_TFC0, DL_TFC4, DL_TFC5, DL_TFC10, DL_TFC14, DL_TFC15, UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC6, UL_TFC8, UL_TFC9 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 |
RB5: 632 RB6: 312 |
RB5: 2552 RB6: 312 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 18.1.1.1 for test procedure.
18.1.2.62.4 Test requirements
See 18.1.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be:
– for sub-test 1: RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 2 -4 : RLC SDUs on RB5 having the content equal to the first 632 bits of the test data sent by the SS in downlink; and no data shall be received on RB6.
– for sub-test 5: RLC SDU on RB6 having the same content as sent by SS; and no data shall be received on RB5.
– for sub-test 6: RLC SDUs on RB5 having the content equal to the first 632 bits of the test data sent by the SS in downlink; RLC SDU on RB6 having the same content as sent by SS.
– for sub-test 7 -9: RLC SDUs on RB5 having the content equal to the first 312 bits of the test data sent by the SS in downlink;. RLC SDU on RB6 having the same content as sent by SS.
– for sub-test 10: RLC SDUs on RB5 having the content equal to the first 632 bits of the test data sent by the SS in downlink;. RLC SDU on RB6 having the same content as sent by SS.
18.1.2.63 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:0 DL:0 kbps / PS RAB+ UL:3.4 DL: 3.4 kbps SRBs for DCCH
18.1.2.63.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.63.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.38a.
18.1.2.63.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (0 kbps, 20 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
N/A |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF0, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (0 kbps, 20 ms TTI) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
N/A |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF0, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC4 |
UL_TFC1, UL_TFC4 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 39 RB6: 103 RB7: 60 RB8: No data |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC5 |
UL_TFC2, UL_TFC5 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.63.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: RLC SDUs on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.64 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB+ UL:3.4 DL: 3.4 kbps SRBs for DCCH
18.1.2.64.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.64.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.38b.
18.1.2.64.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (8 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (8 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1 DL_TFC7 |
UL_TFC1 UL_TFC7 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2 DL_TFC8 |
UL_TFC2 UL_TFC8 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8 |
RB5: 81 RB6: 103 RB7: 60 RB8:312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3 DL_TFC9 |
UL_TFC3 UL_TFC9 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
4 |
DL_TFC4 DL_TFC10 |
UL_TFC4 UL_TFC10 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
5 |
DL_TFC5 DL_TFC11 |
UL_TFC5 UL_TFC11 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. RB8: Test data size has been set to DL TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit). As the uplink TTI for RB8 is 10 ms while the downlink TTI is 40 ms then, to achieve continuous data transmission in uplink the size of the uplink RLC SDU has been set such that it will be transmitted over four subsequent TTIs, i.e. UL RLC SDU SIZE has been set to four times the uplink TFS size minus 8 (the size of a 7 bit length indicator and expansion bit). |
||||||
18.1.2.64.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub test.
3. At step 15 the UE shall return
– for sub-test 1: RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3: RLC SDU on RB8 having the same content as sent by SS in the downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4: RLC SDU on RB5, RB8 having the same content as sent by SS and no data shall be received on RB6 and RB7.
– for sub-test 5: RLC SDU on RB5, RB6, RB7, RB8 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.65 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:32 DL:32 kbps / PS RAB+ UL:3.4 DL: 3.4 kbps SRBs for DCCH
18.1.2.65.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.65.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.38c.
18.1.2.65.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
UL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
UL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
UL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
UL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
UL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
UL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
UL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
UL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
UL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (32 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1 DL_TFC16 |
UL_TFC1 UL_TFC16 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2 DL_TFC17 |
UL_TFC2 UL_TFC17 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC2, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3 DL_TFC18 |
UL_TFC3 UL_TFC18 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC3, UL_TFC15, UL_TFC18 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
4 |
DL_TFC4 DL_TFC19 |
UL_TFC4 UL_TFC19 |
DL_TFC0, DL_TFC1, DL_TFC3, DL_TFC15, DL_TFC16, DL_TFC18, UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC15, UL_TFC16, UL_TFC18 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
5 |
DL_TFC5 DL_TFC20 |
UL_TFC5 UL_TFC20 |
DL_TFC0, DL_TFC2, DL_TFC3, DL_TFC15, DL_TFC17, DL_TFC18, UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC15, UL_TFC17, UL_TFC18 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
6 |
DL_TFC6, DL_TFC21 |
UL_TFC6, UL_TFC21 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC6, UL_TFC15, UL_TFC21 |
RB5: No data RB6: No data RB7: No data RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 632 |
|
7 |
DL_TFC7, DL_TFC22 |
UL_TFC7, UL_TFC22 |
DL_TFC0, DL_TFC1, DL_TFC6, DL_TFC15, DL_TFC16, DL_TFC21, UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC15, UL_TFC16, UL_TFC21 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC15, UL_TFC16, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: No data RB7: No data RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 632 |
|
8 |
DL_TFC8, DL_TFC23 |
UL_TFC8, UL_TFC23 |
DL_TFC0, DL_TFC2, DL_TFC6, DL_TFC15, DL_TFC17, DL_TFC21, UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC15, UL_TFC17, UL_TFC21 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC15, UL_TFC17, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
|
9 |
DL_TFC9, DL_TFC24 |
UL_TFC9, UL_TFC24 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC9, UL_TFC15, UL_TFC24 |
RB5: No data RB6: No data RB7: No data RB8: 952 |
RB5: No data RB6: No data RB7: No data RB8: 952 |
|
10 |
DL_TFC10, DL_TFC25 |
UL_TFC10, UL_TFC25 |
DL_TFC0, DL_TFC1, DL_TFC9, DL_TFC15, DL_TFC16, DL_TFC24, UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC15, UL_TFC16, UL_TFC24 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16, UL_TFC24, UL_TFC25 |
RB5: 39 RB6: No data RB7: No data RB8: 952 |
RB5: 39 RB6: No data RB7: No data RB8: 952 |
|
11 |
DL_TFC11, DL_TFC26 |
UL_TFC11, UL_TFC26 |
DL_TFC0, DL_TFC2, DL_TFC9, DL_TFC15, DL_TFC17, DL_TFC24, UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC15, UL_TFC17, UL_TFC24 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17, UL_TFC24, UL_TFC26 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 |
|
12 |
DL_TFC12, DL_TFC27 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: No data RB6: No data RB7: No data RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 1272 |
|
13 |
DL_TFC13, DL_TFC28 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC1, DL_TFC12, DL_TFC15, DL_TFC16, DL_TFC27, UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC15, UL_TFC16, UL_TFC27 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 |
|
14 |
DL_TFC14, DL_TFC29 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC2, DL_TFC12, DL_TFC15, DL_TFC17, DL_TFC27, UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC15, UL_TFC17, UL_TFC27 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. RB8: Test data size has been set to DL TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit). As the uplink TTI for RB8 is 10 ms while the downlink TTI is 40 ms then, to achieve continuous data transmission in uplink the size of the uplink RLC SDU has been set such that it will be transmitted over four subsequent TTIs, i.e. UL RLC SDU SIZE has been set to four times the uplink TFS size minus 8 (the size of a 7 bit length indicator and expansion bit). |
||||||
18.1.2.65.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub test.
3. At step 15 the UE shall return
– for sub-test 1: RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3, 6, 9 and 12: RLC SDU on RB8 having the same content sent by the SS in the downlink; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4, 7, 10 and 13: RLC SDU on RB5 ,RB8 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 5, 8, 11 and 14: an RLC SDU on RB5, RB6, RB7, RB8 having the same content as sent by SS in the downlink.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.66 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:128 DL:128 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.66.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.66.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.66.
18.1.2.66.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (128 kbps, 20 ms TTI) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
8×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
UL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
UL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
UL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
UL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
UL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
UL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
UL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
UL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
UL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (128 kbps, 20 ms TTI) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
8×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs (note1) |
UL RLC SDU size (bits) Note 2 |
Test data size (bits) Note 2 |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC16 |
UL_TFC1, UL_TFC16 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2, DL_TFC17 |
UL_TFC2, UL_TFC17 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3, DL_TFC18 |
UL_TFC3, UL_TFC18 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC15, UL_TFC18 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
4 |
DL_TFC4, DL_TFC19 |
UL_TFC4, UL_TFC19 |
DL_TFC0, DL_TFC15, DUL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
5 |
DL_TFC5, DL_TFC20 |
UL_TFC5, UL_TFC20 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
6 |
DL_TFC6, DL_TFC21 |
UL_TFC6, UL_TFC21 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC6, UL_TFC15, UL_TFC21 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: No data RB6: No data RB7: No data RB8: 632 |
|
7 |
DL_TFC7, DL_TFC22 |
UL_TFC7, UL_TFC22 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC6, UL_TFC7, UL_TFC15, UL_TFC16, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 632 |
|
8 |
DL_TFC8, DL_TFC23 |
UL_TFC8, UL_TFC23 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC6, UL_TFC8, UL_TFC15, UL_TFC17, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 |
|
9 |
DL_TFC9, DL_TFC24 |
UL_TFC9, UL_TFC24 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC9, UL_TFC15, UL_TFC24 |
RB5: 39 RB6: 103 RB7: 60 RB8: 952 |
RB5: No data RB6: No data RB7: No data RB8: 952 |
|
10 |
DL_TFC10, DL_TFC25 |
UL_TFC10, UL_TFC25 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16, UL_TFC24, UL_TFC25 |
RB5: 39 RB6: 103 RB7: 60 RB8: 952 |
RB5: 39 RB6: No data RB7: No data RB8: 952 |
|
11 |
DL_TFC11, DL_TFC26 |
UL_TFC11, UL_TFC26 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17, UL_TFC24, UL_TFC26 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 |
|
12 |
DL_TFC12, DL_TFC27 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 1272 |
|
13 |
DL_TFC13, DL_TFC28 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 |
|
14 |
DL_TFC14, DL_TFC29 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 |
|
NOTE1: UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 and UL_TFC15 are part of minimum set of TFCIs NOTE2: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.66.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7, RB8 or RB9.
– for sub-test 2: RLC SDUs on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8 or RB9.
– for sub-test 3, 6, 9 and 12: RLC SDUs on RB8 having the same content as sent by SS; and no data shall be received on RB5, RB6, RB7 or RB9.
– for sub-test 4, 7, 10 and 13: RLC SDUs on RB5 and RB8 having the same content as sent by SS; and no data shall be received on RB6, RB7 or RB9.
– for sub-test 5, 8, 11 and 14: RLC SDUs on RB5, RB6, RB7 and RB8 having the same content as sent by SS. No data shall be received on RB9.
– for sub-test 15: RLC SDUs on RB5, RB6, RB7 and RB9 having the same content as sent by SS; and no data shall be received on RB8.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.67 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:64 DL:64 kbps / PS RAB + Interactive or background / UL:64 DL:64 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.67.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.67.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.38d.
18.1.2.67.3 Method of test
See 18.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 + RB9 (64 kbps, 20 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x340 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×340 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×340 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×340 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×340 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8+RB9, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
UL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
UL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
UL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
UL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
UL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
UL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
UL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
UL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
UL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 + RB9 (64 kbps, 20 ms TTI) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x340 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×340 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×340 |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
3×340 |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
4×340 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8+RB9, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF1, TF1) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF2, TF1) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF2, TF1) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF2, TF1) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF3, TF1) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF3, TF1) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF3, TF1) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF4, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF4, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs (note1) |
UL RLC SDU size (bits) Note 2 |
Test data size (bits) Note 2 |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC16 |
UL_TFC1, UL_TFC16 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: No data RB9: No data |
|
2 |
DL_TFC2, DL_TFC17 |
UL_TFC2, UL_TFC17 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data RB9: No data |
|
3 |
DL_TFC3, DL_TFC18 |
UL_TFC3, UL_TFC18 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC15, UL_TFC18 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 RB9: 312 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: No data |
|
4 |
DL_TFC4, DL_TFC19 |
UL_TFC4, UL_TFC19 |
DL_TFC0, DL_TFC15, DUL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: No data |
|
5 |
DL_TFC5, DL_TFC20 |
UL_TFC5, UL_TFC20 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: No data |
|
6 |
DL_TFC6, DL_TFC21 |
UL_TFC6, UL_TFC21 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC6, UL_TFC15, UL_TFC21 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 RB9: 632 |
RB5: No data RB6: No data RB7: No data RB8: 632 RB9: No data |
|
7 |
DL_TFC7, DL_TFC22 |
UL_TFC7, UL_TFC22 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC6, UL_TFC7, UL_TFC15, UL_TFC16, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: 103 RB7: 60 RB8: 632 RB9: 632 |
RB5: 39 RB6: No data RB7: No data RB8: 632 RB9: No data |
|
8 |
DL_TFC8, DL_TFC23 |
UL_TFC8, UL_TFC23 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC6, UL_TFC8, UL_TFC15, UL_TFC17, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 RB9: 632 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 RB9: No data |
|
9 |
DL_TFC9, DL_TFC24 |
UL_TFC9, UL_TFC24 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC9, UL_TFC15, UL_TFC24 |
RB5: 39 RB6: 103 RB7: 60 RB8: 952 RB9: 952 |
RB5: No data RB6: No data RB7: No data RB8: 952 RB9: No data |
|
10 |
DL_TFC10, DL_TFC25 |
UL_TFC10, UL_TFC25 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16, UL_TFC24, UL_TFC25 |
RB5: 39 RB6: 103 RB7: 60 RB8: 952 RB9: 952 |
RB5: 39 RB6: No data RB7: No data RB8: 952 RB9: No data |
|
11 |
DL_TFC11, DL_TFC26 |
UL_TFC11, UL_TFC26 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17, UL_TFC24, UL_TFC26 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 RB9: 952 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 RB9: No data |
|
12 |
DL_TFC12, DL_TFC27 |
UL_TFC12, UL_TFC27 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC12, UL_TFC15, UL_TFC27 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 RB9: 1272 |
RB5: No data RB6: No data RB7: No data RB8: 1272 RB9: No data |
|
13 |
DL_TFC13, DL_TFC28 |
UL_TFC13, UL_TFC28 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 RB9: 1272 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 RB9: No data |
|
14 |
DL_TFC14, DL_TFC29 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 RB9: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 RB9: No data |
|
14 |
DL_TFC14, DL_TFC29 |
UL_TFC14, UL_TFC29 |
DL_TFC0, DL_TFC15, UL_TFC0, UL_TFC15 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 RB9: 1272 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data RB9: 1272 |
|
NOTE1: UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 and UL_TFC15 are part of minimum set of TFCIs NOTE2: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.67.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7, RB8 or RB9.
– for sub-test 2: RLC SDUs on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8 or RB9.
– for sub-test 3, 6, 9 and 12: RLC SDUs on RB8 having the same content as sent by SS; and no data shall be received on RB5, RB6, RB7 or RB9.
– for sub-test 4, 7, 10 and 13: RLC SDUs on RB5 and RB8 having the same content as sent by SS; and no data shall be received on RB6, RB7 or RB9.
– for sub-test 5, 8, 11 and 14: RLC SDUs on RB5, RB6, RB7 and RB8 having the same content as sent by SS; no data shall be received on RB9.
– for sub-test 15: RLC SDUs on RB5, RB6, RB7 and RB9 having the same content as sent by SS; and no data shall be received on RB8.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message
18.1.2.68 Conversational / unknown / UL:64 DL:64 kbps / CS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.68.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.68.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.51a for the 20 ms TTI case.
18.1.2.68.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS for the Conversational / unknown / UL:64 DL:64 kbps / CS RAB (RB5):
|
RB5 (Conv. 64 kbps) |
|
|
Uplink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (Conv. 64 kbps) |
RB6 (I/B 8 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x336 |
0x148 |
|
TF1, bits |
2×640 |
1×336 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0) |
|
UL_TFC2 |
(TF0, TF1, TF0) |
|
UL_TFC3 |
(TF1, TF1, TF0) |
|
UL_TFC4 |
(TF0, TF0, TF1) |
|
UL_TFC5 |
(TF1, TF0, TF1) |
|
UL_TFC6 |
(TF0, TF1, TF1) |
|
UL_TFC7 |
(TF1, TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (Conv. 64 kbps) |
RB6 (I/B 8 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x336 |
0x148 |
|
TF1, bits |
2×640 |
1×336 |
1×148 |
Downlink TFCS:
|
TFCI |
(RB5, RB6, DCCH) |
|---|---|
|
DL_TFC0 |
(TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0) |
|
DL_TFC2 |
(TF0, TF1, TF0) |
|
DL_TFC3 |
(TF1, TF1, TF0) |
|
DL_TFC4 |
(TF0, TF0, TF1) |
|
DL_TFC5 |
(TF1, TF0, TF1) |
|
DL_TFC6 |
(TF0, TF1, TF1) |
|
DL_TFC7 |
(TF1, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1,DL_TFC5 |
UL_TFC1,DL_TFC5 |
DL_TFC0, DL_TFC4, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC4, UL_TFC5 |
RB5: No data RB6: 312 |
RB5: No data RB6: 312 |
|
2 |
DL_TFC2,DL_TFC6 |
UL_TFC2,DL_TFC6 |
DL_TFC0, DL_TFC4, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC2, UL_TFC4, UL_TFC6 |
RB5: 2×640 RB6: No data |
RB5: 2×640 RB6: No data |
|
3 |
DL_TFC3,DL_TFC7 |
UL_TFC3,DL_TFC7 |
DL_TFC0, DL_TFC4, UL_TFC0, UL_TFC4 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC7 |
RB5: 2×640 RB6: 312 |
RB5: 2×640 RB6: 312 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. RB6: Test data size has been set to DL TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit). As the TTI for RB5 and RB6 is the same for both downlink and uplink then UL RLC SDU size has been set to achieve UE to return one SDU per TTI, i.e. the UL RLC SDU size for RB6 has been set equal to the uplink TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit).and .the UL RLC SDU size for RB5 has been set equal to the uplink TFS size under test. |
||||||
18.1.2.68.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: an RLC SDU on RB6 having the same content as sent by SS; and no data shall be received on RB5.
– for sub-test 2: two RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6.
– for sub-test 3: two RLC SDUs on RB5 and one RLC SDU on RB6 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.69 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL:16 DL:64 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.69.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.69.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.67.
18.1.2.69.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (16bps, 20 ms TTI) |
RB9 (8kbps, 40ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, RB9, DCCH) |
|
UL_TFC0 |
(TF0,TF0,TF0,TF0,TF0,TF0) |
|
UL_TFC1 |
(TF1,TF0,TF0,TF0,TF0,TF0) |
|
UL_TFC2 |
(TF2,TF1,TF1,TF0,TF0,TF0) |
|
UL_TFC3 |
(TF0,TF0,TF0,TF1,TF0,TF0) |
|
UL_TFC4 |
(TF1,TF0,TF0,TF1,TF0,TF0) |
|
UL_TFC5 |
(TF2,TF1,TF1,TF1,TF0,TF0) |
|
UL_TFC6 |
(TF0,TF0,TF0,TF0,TF1,TF0) |
|
UL_TFC7 |
(TF1,TF0,TF0,TF0,TF1,TF0) |
|
UL_TFC8 |
(TF2,TF1,TF1,TF0,TF1,TF0) |
|
UL_TFC9 |
(TF0,TF0,TF0,TF1,TF1,TF0) |
|
UL_TFC10 |
(TF1,TF0,TF0,TF1,TF1,TF0) |
|
UL_TFC11 |
(TF2,TF1,TF1,TF1,TF1,TF0) |
|
UL_TFC12 |
(TF0,TF0,TF0,TF0,TF0,TF1) |
|
UL_TFC13 |
(TF1,TF0,TF0,TF0,TF0,TF1) |
|
UL_TFC14 |
(TF2,TF1,TF1,TF0,TF0,TF1) |
|
UL_TFC15 |
(TF0,TF0,TF0,TF1,TF0,TF1) |
|
UL_TFC16 |
(TF1,TF0,TF0,TF1,TF0,TF1) |
|
UL_TFC17 |
(TF2,TF1,TF1,TF1,TF0,TF1) |
|
UL_TFC18 |
(TF0,TF0,TF0,TF0,TF1,TF1) |
|
UL_TFC19 |
(TF1,TF0,TF0,TF0,TF1,TF1) |
|
UL_TFC20 |
(TF2,TF1,TF1,TF0,TF1,TF1) |
|
UL_TFC21 |
(TF0,TF0,TF0,TF1,TF1,TF1) |
|
UL_TFC22 |
(TF1,TF0,TF0,TF1,TF1,TF1) |
|
UL_TFC23 |
(TF2,TF1,TF1,TF1,TF1,TF1) |
Downlink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64s, 40ms TTI) |
RB9 (8kbps, 40ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x656 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×656 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×656 |
N/A |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×656 |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, RB9, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF0, TF1, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF1, TF1, TF0) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF1, TF1, TF0) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF1, TF1, TF0) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF2, TF1, TF0) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF2, TF1, TF0) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF2, TF1, TF0) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF3, TF1, TF0) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF3, TF1, TF0) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF3, TF1, TF0) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF0, TF0, TF1) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF1, TF0, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF1, TF0, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF1, TF0, TF1) |
|
DL_TFC30 |
(TF0, TF0, TF0, TF2, TF0, TF1) |
|
DL_TFC31 |
(TF1, TF0, TF0, TF2, TF0, TF1) |
|
DL_TFC32 |
(TF2, TF1, TF1, TF2, TF0, TF1) |
|
DL_TFC33 |
(TF0, TF0, TF0, TF3, TF0, TF1) |
|
DL_TFC34 |
(TF1, TF0, TF0, TF3, TF0, TF1) |
|
DL_TFC35 |
(TF2, TF1, TF1, TF3, TF0, TF1) |
|
DL_TFC36 |
(TF0, TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC37 |
(TF1, TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC38 |
(TF2, TF1, TF1, TF0, TF1, TF1) |
|
DL_TFC39 |
(TF0, TF0, TF0, TF1, TF1, TF1) |
|
DL_TFC40 |
(TF1, TF0, TF0, TF1, TF1, TF1) |
|
DL_TFC41 |
(TF2, TF1, TF1, TF1, TF1, TF1) |
|
DL_TFC42 |
(TF0, TF0, TF0, TF2, TF1, TF1) |
|
DL_TFC43 |
(TF1, TF0, TF0, TF2, TF1, TF1) |
|
DL_TFC44 |
(TF2, TF1, TF1, TF2, TF1, TF1) |
|
DL_TFC45 |
(TF0, TF0, TF0, TF3, TF1, TF1) |
|
DL_TFC46 |
(TF1, TF0, TF0, TF3, TF1, TF1) |
|
DL_TFC47 |
(TF2, TF1, TF1, TF3, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC25 |
UL_TFC1, UL_TFC13 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13 |
RB5: 39 RB6: No data RB7: No data RB8: No data RB8: No data |
RB5: 39 RB6: No data RB7: No data RB8: No data RB9: No data |
|
2 |
DL_TFC2, DL_TFC26 |
UL_TFC2, UL_TFC14 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data RB8: No data |
RB5: 81 RB6: 103 RB7: 60 RB8: No data RB9: No data |
|
3 |
DL_TFC3, DL_TFC27 |
UL_TFC3, UL_TFC15 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC3, UL_TFC12, UL_TFC15 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: No data |
RB5: No data RB6: No data RB7: No data RB8: 632 RB9: No data |
|
4 |
DL_TFC4, DL_TFC28 |
UL_TFC4, UL_TFC16 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: No data RB7: No data RB8:312 RB9: No data |
RB5: 39 RB6: No data RB7: No data RB8: 632 RB9: No data |
|
5 |
DL_TFC5, DL_TFC29 |
UL_TFC5 UL_TFC17 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: No data |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 RB9: No data |
|
6 |
DL_TFC6, DL_TFC30 |
UL_TFC6, UL_TFC18 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC3, UL_TFC12, UL_TFC15 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: No data |
RB5: No data RB6: No data RB7: No data RB8: 1272 RB9: No data |
|
7 |
DL_TFC7, DL_TFC31 |
UL_TFC7, UL_TFC19 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: No data |
RB5: 39 RB6: No data RB7: No data RB8: 1272 RB9: No data |
|
8 |
DL_TFC8, DL_TFC32 |
UL_TFC8, UL_TFC20 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: No data |
RB5: 81 RB6: 103 RB7: 60 RB8:1272 RB9: No data |
|
9 |
DL_TFC9, DL_TFC33 |
UL_TFC9, UL_TFC21 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC3, UL_TFC12, UL_TFC15 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: No data |
RB5: No data RB6: No data RB7: No data RB8: 2552 RB9: No data |
|
10 |
DL_TFC10, DL_TFC34 |
UL_TFC10 UL_TFC22 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: No data |
RB5: 39 RB6: No data RB7: No data RB8: 2552 RB9: 312 |
|
11 |
DL_TFC11, DL_TFC35 |
UL_TFC11, UL_TFC23 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: No data |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 RB9: No data |
|
12 |
DL_TFC12, DL_TFC36 |
UL_TFC6, UL_TFC18 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC6, UL_TFC12, UL_TFC18 |
RB5: No data RB6: No data RB7: No data RB8: No data RB9: 312 |
RB5: No data RB6: No data RB7: No data RB8: No data RB9: 312 |
|
13 |
DL_TFC13, DL_TFC37 |
UL_TFC7, UL_TFC19 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC12, UL_TFC13, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: No data RB7: No data RB8: No data RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: No data RB9: 312 |
|
14 |
DL_TFC14, DL_TFC38 |
UL_TFC8, UL_TFC20 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC12, UL_TFC14, UL_TFC18, UL_TFC20 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data RB9: 312 |
|
15 |
DL_TFC15, DL_TFC39 |
UL_TFC9, UL_TFC21 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9, UL_TFC12, UL_TFC15, UL_TFC18, UL_TFC21 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: 312 |
RB5: No data RB6: No data RB7: No data RB8: 632 RB9: 312 |
|
16 |
DL_TFC16, DL_TFC40 |
UL_TFC10, UL_TFC22 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 632 RB9: 312 |
|
17 |
DL_TFC17, DL_TFC41 |
UL_TFC11, UL_TFC23 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 RB9: 312 |
|
18 |
DL_TFC18, DL_TFC42 |
UL_TFC9, UL_TFC21 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9, UL_TFC12, UL_TFC15, UL_TFC18, UL_TFC21 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: 312 |
RB5: No data RB6: No data RB7: No data RB8: 1272 RB9: 312 |
|
19 |
DL_TFC19, DL_TFC43 |
UL_TFC10, UL_TFC22 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 RB9: 312 |
|
20 |
DL_TFC20, DL_TFC44 |
UL_TFC11, UL_TFC23 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 RB9: 312 |
|
21 |
DL_TFC21, DL_TFC45 |
UL_TFC9, UL_TFC21 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9 UL_TFC12, UL_TFC15, UL_TFC18, UL_TFC21 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: 312 |
RB5: No data RB6: No data RB7: No data RB8: 2552 RB9: 312 |
|
22 |
DL_TFC22, DL_TFC46 |
UL_TFC10, UL_TFC22 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 2552 RB9: 312 |
|
23 |
DL_TFC23, DL_TFC47 |
UL_TFC11, UL_TFC23 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 RB9: 312 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.69.4 Test requirements
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7, RB8 and RB9.
– for sub-test 2: an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8 and RB9.
– for sub-test 3, 6, 9: an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by sent by SS in downlink; and no data shall be received on RB5, RB6, RB7 and RB9.
– for sub-test 4, 7, 10: an RLC SDU on RB5 having the same content of the test data sent by the SS in downlink; and no data shall be received on RB6, RB7 and RB9; an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by sent by SS.
– for sub-test 5, 8, 11: an RLC SDU on RB5, RB6, RB7 having the same content as sent by SS; and no data shall be received on RB9; an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by sent by SS.
– for sub-test 12:an RLC SDU on RB9 having the same content as sent by SS; and no data shall be received on RB5, RB6, RB7, RB8.
– for sub-test 13: an RLC SDU on RB5 and RB9 having the same content as sent by SS; and no data shall be received on RB6, RB7, RB8.
– for sub-test 14: an RLC SDU on RB5, RB6, RB7 and RB9 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 15, 18, 21: an RLC SDU on RB9 having the same content as sent by SS; and no data shall be received on RB5, RB6 and RB7; an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by sent by SS.
– for sub-test 16, 19, 22: an RLC SDU on RB5 and RB9 having the same content as sent by SS; and no data shall be received on RB6 and RB7; an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by sent by SS.
– for sub-test 17, 20, 23: an RLC SDU on RB5, RB6, RB7 and RB9 having the same content as sent by SS; an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.70 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL:16 DL:128 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.70.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.70.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.68.
18.1.2.70.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (16 kbps, 20ms TTI) |
RB9 (8kbps, 40ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, RB9, DCCH) |
|
UL_TFC0 |
(TF0,TF0,TF0,TF0,TF0,TF0) |
|
UL_TFC1 |
(TF1,TF0,TF0,TF0,TF0,TF0) |
|
UL_TFC2 |
(TF2,TF1,TF1,TF0,TF0,TF0) |
|
UL_TFC3 |
(TF0,TF0,TF0,TF1,TF0,TF0) |
|
UL_TFC4 |
(TF1,TF0,TF0,TF1,TF0,TF0) |
|
UL_TFC5 |
(TF2,TF1,TF1,TF1,TF0,TF0) |
|
UL_TFC6 |
(TF0,TF0,TF0,TF0,TF1,TF0) |
|
UL_TFC7 |
(TF1,TF0,TF0,TF0,TF1,TF0) |
|
UL_TFC8 |
(TF2,TF1,TF1,TF0,TF1,TF0) |
|
UL_TFC9 |
(TF0,TF0,TF0,TF1,TF1,TF0) |
|
UL_TFC10 |
(TF1,TF0,TF0,TF1,TF1,TF0) |
|
UL_TFC11 |
(TF2,TF1,TF1,TF1,TF1,TF0) |
|
UL_TFC12 |
(TF0,TF0,TF0,TF0,TF0,TF1) |
|
UL_TFC13 |
(TF1,TF0,TF0,TF0,TF0,TF1) |
|
UL_TFC14 |
(TF2,TF1,TF1,TF0,TF0,TF1) |
|
UL_TFC15 |
(TF0,TF0,TF0,TF1,TF0,TF1) |
|
UL_TFC16 |
(TF1,TF0,TF0,TF1,TF0,TF1) |
|
UL_TFC17 |
(TF2,TF1,TF1,TF1,TF0,TF1) |
|
UL_TFC18 |
(TF0,TF0,TF0,TF0,TF1,TF1) |
|
UL_TFC19 |
(TF1,TF0,TF0,TF0,TF1,TF1) |
|
UL_TFC20 |
(TF2,TF1,TF1,TF0,TF1,TF1) |
|
UL_TFC21 |
(TF0,TF0,TF0,TF1,TF1,TF1) |
|
UL_TFC22 |
(TF1,TF0,TF0,TF1,TF1,TF1) |
|
UL_TFC23 |
(TF2,TF1,TF1,TF1,TF1,TF1) |
Downlink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (128 kbps s, 20ms TTI) |
RB9 (8kbps, 40ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
8×336 |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, RB9, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF4, TF0, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF4, TF0, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF4, TF0, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF0, TF1, TF0) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF1, TF1, TF0) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF1, TF1, TF0) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF1, TF1, TF0) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF2, TF1, TF0) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF2, TF1, TF0) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF2, TF1, TF0) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF3, TF1, TF0) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF3, TF1, TF0) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF3, TF1, TF0) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF4, TF1, TF0) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF4, TF1, TF0) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF4, TF1, TF0) |
|
DL_TFC30 |
(TF0, TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC31 |
(TF1, TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC32 |
(TF2, TF1, TF1, TF0, TF0, TF1) |
|
DL_TFC33 |
(TF0, TF0, TF0, TF1, TF0, TF1) |
|
DL_TFC34 |
(TF1, TF0, TF0, TF1, TF0, TF1) |
|
DL_TFC35 |
(TF2, TF1, TF1, TF1, TF0, TF1) |
|
DL_TFC36 |
(TF0, TF0, TF0, TF2, TF0, TF1) |
|
DL_TFC37 |
(TF1, TF0, TF0, TF2, TF0, TF1) |
|
DL_TFC38 |
(TF2, TF1, TF1, TF2, TF0, TF1) |
|
DL_TFC39 |
(TF0, TF0, TF0, TF3, TF0, TF1) |
|
DL_TFC40 |
(TF1, TF0, TF0, TF3, TF0, TF1) |
|
DL_TFC41 |
(TF2, TF1, TF1, TF3, TF0, TF1) |
|
DL_TFC42 |
(TF0, TF0, TF0, TF4, TF0, TF1) |
|
DL_TFC43 |
(TF1, TF0, TF0, TF4, TF0, TF1) |
|
DL_TFC44 |
(TF2, TF1, TF1, TF4, TF0, TF1) |
|
DL_TFC45 |
(TF0, TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC46 |
(TF1, TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC47 |
(TF2, TF1, TF1, TF0, TF1, TF1) |
|
DL_TFC48 |
(TF0, TF0, TF0, TF1, TF1, TF1) |
|
DL_TFC49 |
(TF1, TF0, TF0, TF1, TF1, TF1) |
|
DL_TFC50 |
(TF2, TF1, TF1, TF1, TF1, TF1) |
|
DL_TFC51 |
(TF0, TF0, TF0, TF2, TF1, TF1) |
|
DL_TFC52 |
(TF1, TF0, TF0, TF2, TF1, TF1) |
|
DL_TFC53 |
(TF2, TF1, TF1, TF2, TF1, TF1) |
|
DL_TFC54 |
(TF0, TF0, TF0, TF3, TF1, TF1) |
|
DL_TFC55 |
(TF1, TF0, TF0, TF3, TF1, TF1) |
|
DL_TFC56 |
(TF2, TF1, TF1, TF3, TF1, TF1) |
|
DL_TFC57 |
(TF0, TF0, TF0, TF4, TF1, TF1) |
|
DL_TFC58 |
(TF1, TF0, TF0, TF4, TF1, TF1) |
|
DL_TFC59 |
(TF2, TF1, TF1, TF4, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC31 |
UL_TFC1 UL_TFC13 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13 |
RB5: 39 RB6: No data RB7: No data RB8: No data RB8: No data |
RB5: 39 RB6: No data RB7: No data RB8: No data RB9: No data |
|
2 |
DL_TFC2, DL_TFC32 |
UL_TFC2, UL_TFC14 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data RB8: No data |
RB5: 81 RB6: 103 RB7: 60 RB8: No data RB9: No data |
|
3 |
DL_TFC3, DL_TFC33 |
UL_TFC3, UL_TFC15 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC3, UL_TFC12, UL_TFC15 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: No data |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: No data |
|
4 |
DL_TFC4, DL_TFC34 |
UL_TFC4, UL_TFC16 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: No data RB7: No data RB8:312 RB9: No data |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: No data |
|
5 |
DL_TFC5, DL_TFC35 |
UL_TFC5 UL_TFC17 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC12 UL_TFC14, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8:312 RB9: No data |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: No data |
|
6 |
DL_TFC6, DL_TFC36 |
UL_TFC3, UL_TFC15 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC3, UL_TFC12, UL_TFC15 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: No data |
RB5: No data RB6: No data RB7: No data RB8: 632 RB9: No data |
|
7 |
DL_TFC7, DL_TFC37 |
UL_TFC4, UL_TFC16 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: No data |
RB5: 39 RB6: No data RB7: No data RB8: 632 RB9: No data |
|
8 |
DL_TFC8, DL_TFC38 |
UL_TFC5, UL_TFC17 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: No data |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 RB9: No data |
|
9 |
DL_TFC9, DL_TFC39 |
UL_TFC3, UL_TFC15 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC3, UL_TFC12, UL_TFC15 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: No data |
RB5: No data RB6: No data RB7: No data RB8: 952 RB9: No data |
|
10 |
DL_TFC10, DL_TFC40 |
UL_TFC4 UL_TFC16 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: No data |
RB5: 39 RB6: No data RB7: No data RB8: 952 RB9: No data |
|
11 |
DL_TFC11, DL_TFC41 |
UL_TFC5, UL_TFC17 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: No data |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 RB9: No data |
|
12 |
DL_TFC12, DL_TFC42 |
UL_TFC3, UL_TFC15 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC3, UL_TFC12, UL_TFC15 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: No data |
RB5: No data RB6: No data RB7: No data RB8: 1272 RB9: No data |
|
13 |
DL_TFC13, DL_TFC43 |
UL_TFC4, UL_TFC16 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16 |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: No data |
RB5: 39 RB6: No data RB7: No data RB8: 1272 RB9: No data |
|
14 |
DL_TFC14, DL_TFC44 |
UL_TFC5, UL_TFC17 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: No data |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 RB9: No data |
|
15 |
DL_TFC15, DL_TFC45 |
UL_TFC6, UL_TFC18 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC6, UL_TFC12, UL_TFC18 |
RB5: No data RB6: No data RB7: No data RB8: No data RB9: 312 |
RB5: No data RB6: No data RB7: No data RB8: No data RB9: 312 |
|
16 |
DL_TFC16, DL_TFC46 |
UL_TFC7, UL_TFC19 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC12, UL_TFC13, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: No data RB7: No data RB8: No data RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: No data RB9: 312 |
|
17 |
DL_TFC17, DL_TFC47 |
UL_TFC8, UL_TFC20 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC12, UL_TFC14, UL_TFC18, UL_TFC20 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data RB9: 312 |
|
18 |
DL_TFC18, DL_TFC48 |
UL_TFC9, UL_TFC21 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC3, UL_TFC6, UL_TFC9, UL_TFC12, UL_TFC15, UL_TFC18, UL_TFC21 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: 312 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: 312 |
|
19 |
DL_TFC19, DL_TFC49 |
UL_TFC10, UL_TFC22 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: 312 |
|
20 |
DL_TFC20, DL_TFC50 |
UL_TFC11, UL_TFC23 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: 312 |
|
21 |
DL_TFC21, DL_TFC51 |
UL_TFC9, UL_TFC21 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC9, UL_TFC12, UL_TFC21 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: 312 |
RB5: No data RB6: No data RB7: No data RB8: 632 RB9: 312 |
|
22 |
DL_TFC22, DL_TFC52 |
UL_TFC10, UL_TFC22 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 632 RB9: 312 |
|
23 |
DL_TFC23, DL_TFC53 |
UL_TFC11, UL_TFC23 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 RB9: 312 |
|
24 |
DL_TFC24, DL_TFC54 |
UL_TFC9, UL_TFC21 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC9 UL_TFC12, UL_TFC21 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: 312 |
RB5: No data RB6: No data RB7: No data RB8: 952 RB9: 312 |
|
25 |
DL_TFC25, DL_TFC55 |
UL_TFC10, UL_TFC22 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 952 RB9: 312 |
|
26 |
DL_TFC26, DL_TFC56 |
UL_TFC11, UL_TFC23 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 952 RB9: 312 |
|
27 |
DL_TFC27, DL_TFC57 |
UL_TFC9, UL_TFC21 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC9 UL_TFC12, UL_TFC21 |
RB5: No data RB6: No data RB7: No data RB8: 312 RB9: 312 |
RB5: No data RB6: No data RB7: No data RB8: 1272 RB9: 312 |
|
28 |
DL_TFC28, DL_TFC58 |
UL_TFC10, UL_TFC22 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC18, UL_TFC19, UL_TFC21, UL_TFC22 |
RB5: 39 RB6: No data RB7: No data RB8: 312 RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 RB9: 312 |
|
29 |
DL_TFC29, DL_TFC59 |
UL_TFC11, UL_TFC23 |
DL_TFC0, DL_TFC30, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC18, UL_TFC20, UL_TFC21, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 RB9: 312 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.70.4 Test requirements
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 RB8 and RB9.
– for sub-test 2: an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8 and RB9.
– for sub-test 3: an RLC SDU on RB8 he same content of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6, RB7 and RB9.
– for sub-test 4: an RLC SDU on RB8 having the same content of the test data sent by the SS in downlink; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 5: an RLC SDU on RB5, RB6, RB7 and RB8 having the same content as sent by SS; and no data shall be received on RB9.
– for sub-test 6, 9, 12: an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by the SS in downlink; and no data shall be received on RB5, RB6, RB7 and RB9.
– for sub-test 7, 10, 13: an RLC SDU on RB5 having the content equal to the content of the test data sent by the SS in downlink; an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by sent by SS; and no data shall be received on RB6, RB7 and RB9.
– for sub-test 8, 11, 14: an RLC SDU on RB5, RB6, RB7 having the same content as sent by SS; an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by sent by SS; no data shall be received on RB9.
– for sub-test 15: an RLC SDU on RB9 having the same content as sent by SS; and no data shall be received on RB5, RB6, RB7 and RB8.
– for sub-test 16: an RLC SDU on RB5 and RB9 having the same content as sent by SS; and no data shall be received on RB6, RB7, RB8.
– for sub-test 17: an RLC SDU on RB5, RB6, RB7 and RB9 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 18: an RLC SDU on RB8 and RB9 having the same content as sent by SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 19: an RLC SDU on RB5, RB8 and RB9 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 20: an RLC SDU on RB5, RB6, RB7, RB8 and RB9 having the same content as sent by SS.
– for sub-test 21, 24, 27: an RLC SDU on RB9 having the same content as sent by SS; an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by sent by SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 22, 25, 28: an RLC SDU on RB5 and RB9 having the same content as sent by SS; an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 23, 26, 29: an RLC SDU on RB5, RB6, RB7 and RB9 having the same content as sent by SS; an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.71 Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL:128 DL:64 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.71.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.71.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.69.
18.1.2.71.3 Method of test
See 18.1.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (128 kbps s, 20ms TTI) |
RB9 (8kbps, 40ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×336 |
N/A |
N/A |
|
|
TF3, bits |
N/A |
N/A |
N/A |
4×336 |
N/A |
N/A |
|
|
TF4, bits |
N/A |
N/A |
N/A |
8×336 |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, RB9, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF2, TF0, TF0) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF2, TF0, TF0) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF2, TF0, TF0) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF3, TF0, TF0) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF3, TF0, TF0) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF3, TF0, TF0) |
|
UL_TFC12 |
(TF0, TF0, TF0, TF4, TF0, TF0) |
|
UL_TFC13 |
(TF1, TF0, TF0, TF4, TF0, TF0) |
|
UL_TFC14 |
(TF2, TF1, TF1, TF4, TF0, TF0) |
|
UL_TFC15 |
(TF0, TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC16 |
(TF1, TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC17 |
(TF2, TF1, TF1, TF0, TF1, TF0) |
|
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1, TF0) |
|
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1, TF0) |
|
UL_TFC20 |
(TF2, TF1, TF1, TF1, TF1, TF0) |
|
UL_TFC21 |
(TF0, TF0, TF0, TF2, TF1, TF0) |
|
UL_TFC22 |
(TF1, TF0, TF0, TF2, TF1, TF0) |
|
UL_TFC23 |
(TF2, TF1, TF1, TF2, TF1, TF0) |
|
UL_TFC24 |
(TF0, TF0, TF0, TF3, TF1, TF0) |
|
UL_TFC25 |
(TF1, TF0, TF0, TF3, TF1, TF0) |
|
UL_TFC26 |
(TF2, TF1, TF1, TF3, TF1, TF0) |
|
UL_TFC27 |
(TF0, TF0, TF0, TF4, TF1, TF0) |
|
UL_TFC28 |
(TF1, TF0, TF0, TF4, TF1, TF0) |
|
UL_TFC29 |
(TF2, TF1, TF1, TF4, TF1, TF0) |
|
UL_TFC30 |
(TF0, TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC31 |
(TF1, TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC32 |
(TF2, TF1, TF1, TF0, TF0, TF1) |
|
UL_TFC33 |
(TF0, TF0, TF0, TF1, TF0, TF1) |
|
UL_TFC34 |
(TF1, TF0, TF0, TF1, TF0, TF1) |
|
UL_TFC35 |
(TF2, TF1, TF1, TF1, TF0, TF1) |
|
UL_TFC36 |
(TF0, TF0, TF0, TF2, TF0, TF1) |
|
UL_TFC37 |
(TF1, TF0, TF0, TF2, TF0, TF1) |
|
UL_TFC38 |
(TF2, TF1, TF1, TF2, TF0, TF1) |
|
UL_TFC39 |
(TF0, TF0, TF0, TF3, TF0, TF1) |
|
UL_TFC40 |
(TF1, TF0, TF0, TF3, TF0, TF1) |
|
UL_TFC41 |
(TF2, TF1, TF1, TF3, TF0, TF1) |
|
UL_TFC42 |
(TF0, TF0, TF0, TF4, TF0, TF1) |
|
UL_TFC43 |
(TF1, TF0, TF0, TF4, TF0, TF1) |
|
UL_TFC44 |
(TF2, TF1, TF1, TF4, TF0, TF1) |
|
UL_TFC45 |
(TF0, TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC46 |
(TF1, TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC47 |
(TF2, TF1, TF1, TF0, TF1, TF1) |
|
UL_TFC48 |
(TF0, TF0, TF0, TF1, TF1, TF1) |
|
UL_TFC49 |
(TF1, TF0, TF0, TF1, TF1, TF1) |
|
UL_TFC50 |
(TF2, TF1, TF1, TF1, TF1, TF1) |
|
UL_TFC51 |
(TF0, TF0, TF0, TF2, TF1, TF1) |
|
UL_TFC52 |
(TF1, TF0, TF0, TF2, TF1, TF1) |
|
UL_TFC53 |
(TF2, TF1, TF1, TF2, TF1, TF1) |
|
UL_TFC54 |
(TF0, TF0, TF0, TF3, TF1, TF1) |
|
UL_TFC55 |
(TF1, TF0, TF0, TF3, TF1, TF1) |
|
UL_TFC56 |
(TF2, TF1, TF1, TF3, TF1, TF1) |
|
UL_TFC57 |
(TF0, TF0, TF0, TF4, TF1, TF1) |
|
UL_TFC58 |
(TF1, TF0, TF0, TF4, TF1, TF1) |
|
UL_TFC59 |
(TF2, TF1, TF1, TF4, TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps s, 40ms TTI) |
RB9 (8kbps, 40ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x656 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×656 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
2×656 |
N/A |
N/A |
|
|
TF3,its |
N/A |
N/A |
N/A |
4×656 |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, RB9, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF2, TF0, TF0) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF2, TF0, TF0) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF2, TF0, TF0) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF3, TF0, TF0) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF3, TF0, TF0) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF3, TF0, TF0) |
|
DL_TFC12 |
(TF0, TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC13 |
(TF1, TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC14 |
(TF2, TF1, TF1, TF0, TF1, TF0) |
|
DL_TFC15 |
(TF0, TF0, TF0, TF1, TF1, TF0) |
|
DL_TFC16 |
(TF1, TF0, TF0, TF1, TF1, TF0) |
|
DL_TFC17 |
(TF2, TF1, TF1, TF1, TF1, TF0) |
|
DL_TFC18 |
(TF0, TF0, TF0, TF2, TF1, TF0) |
|
DL_TFC19 |
(TF1, TF0, TF0, TF2, TF1, TF0) |
|
DL_TFC20 |
(TF2, TF1, TF1, TF2, TF1, TF0) |
|
DL_TFC21 |
(TF0, TF0, TF0, TF3, TF1, TF0) |
|
DL_TFC22 |
(TF1, TF0, TF0, TF3, TF1, TF0) |
|
DL_TFC23 |
(TF2, TF1, TF1, TF3, TF1, TF0) |
|
DL_TFC24 |
(TF0, TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC25 |
(TF1, TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC26 |
(TF2, TF1, TF1, TF0, TF0, TF1) |
|
DL_TFC27 |
(TF0, TF0, TF0, TF1, TF0, TF1) |
|
DL_TFC28 |
(TF1, TF0, TF0, TF1, TF0, TF1) |
|
DL_TFC29 |
(TF2, TF1, TF1, TF1, TF0, TF1) |
|
DL_TFC30 |
(TF0, TF0, TF0, TF2, TF0, TF1) |
|
DL_TFC31 |
(TF1, TF0, TF0, TF2, TF0, TF1) |
|
DL_TFC32 |
(TF2, TF1, TF1, TF2, TF0, TF1) |
|
DL_TFC33 |
(TF0, TF0, TF0, TF3, TF0, TF1) |
|
DL_TFC34 |
(TF1, TF0, TF0, TF3, TF0, TF1) |
|
DL_TFC35 |
(TF2, TF1, TF1, TF3, TF0, TF1) |
|
DL_TFC36 |
(TF0, TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC37 |
(TF1, TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC38 |
(TF2, TF1, TF1, TF0, TF1, TF1) |
|
DL_TFC39 |
(TF0, TF0, TF0, TF1, TF1, TF1) |
|
DL_TFC40 |
(TF1, TF0, TF0, TF1, TF1, TF1) |
|
DL_TFC41 |
(TF2, TF1, TF1, TF1, TF1, TF1) |
|
DL_TFC42 |
(TF0, TF0, TF0, TF2, TF1, TF1) |
|
DL_TFC43 |
(TF1, TF0, TF0, TF2, TF1, TF1) |
|
DL_TFC44 |
(TF2, TF1, TF1, TF2, TF1, TF1) |
|
DL_TFC45 |
(TF0, TF0, TF0, TF3, TF1, TF1) |
|
DL_TFC46 |
(TF1, TF0, TF0, TF3, TF1, TF1) |
|
DL_TFC47 |
(TF2, TF1, TF1, TF3, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1, DL_TFC25 |
UL_TFC1, UL_TFC31 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC1, UL_TFC30, UL_TFC31 |
RB5: 39 RB6: 103 RB7: 60 RB8: No data RB8: no data |
RB5: 39 RB6: No data RB7: No data RB8: No data RB9: No data |
|
2 |
DL_TFC2, DL_TFC26 |
UL_TFC2, UL_TFC32 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC2, UL_TFC30, UL_TFC32 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data RB8: No data |
RB5: 81 RB6: 103 RB7: 60 RB8: No data RB9: No data |
|
3 |
DL_TFC3, DL_TFC27 |
UL_TFC3, UL_TFC33 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC3, UL_TFC30, UL_TFC33 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 RB9: No data |
RB5: No data RB6: No data RB7: No data RB8: 632 RB9: No data |
|
4 |
DL_TFC4, DL_TFC28 |
UL_TFC4, UL_TFC34 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4, UL_TFC30, UL_TFC31, UL_TFC33, UL_TFC34 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 RB9: No data |
RB5: 39 RB6: No data RB7: No data RB8: 632 RB9: No data |
|
5 |
DL_TFC5, DL_TFC29 |
UL_TFC8 UL_TFC38 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC30, UL_TFC32, UL_TFC36, UL_TFC38 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 RB9: No data |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 RB9: No data |
|
6 |
DL_TFC6, DL_TFC30 |
UL_TFC9, UL_TFC39 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC9, UL_TFC30, UL_TFC39 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1272 RB9: No data |
RB5: No data RB6: No data RB7: No data RB8: 1272 RB9: No data |
|
7 |
DL_TFC7, DL_TFC31 |
UL_TFC10, UL_TFC40 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10, UL_TFC30, UL_TFC31, UL_TFC39, UL_TFC40 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 RB9: No data |
RB5: 39 RB6: No data RB7: No data RB8: 1272 RB9: No data |
|
8 |
DL_TFC8, DL_TFC32 |
UL_TFC11, UL_TFC41 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11, UL_TFC30, UL_TFC32, UL_TFC39, UL_TFC41 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 RB9: No data |
RB5: 81 RB6: 103 RB7: 60 RB8:1272 RB9: No data |
|
9 |
DL_TFC9, DL_TFC33 |
UL_TFC12, UL_TFC42 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC12, UL_TFC30, UL_TFC42 |
RB5: No data RB6: No data RB7: No data RB8: 2552 RB9: No data |
RB5: No data RB6: No data RB7: No data RB8: 2552 RB9: No data |
|
10 |
DL_TFC10, DL_TFC34 |
UL_TFC13 UL_TFC43 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC30, UL_TFC31, UL_TFC42, UL_TFC43 |
RB5: 39 RB6: No data RB7: No data RB8: 2552 RB9: No data |
RB5: 39 RB6: No data RB7: No data RB8: 2552 RB9: No data |
|
11 |
DL_TFC11, DL_TFC35 |
UL_TFC14, UL_TFC44 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC30, UL_TFC32, UL_TFC42, UL_TFC44 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 RB9: No data |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 RB9: No data |
|
12 |
DL_TFC12, DL_TFC36 |
UL_TFC15, UL_TFC45 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC15, UL_TFC30, UL_TFC45 |
RB5: No data RB6: No data RB7: No data RB8: No data RB9: 312 |
RB5: No data RB6: No data RB7: No data RB8: No data RB9: 312 |
|
13 |
DL_TFC13, DL_TFC37 |
UL_TFC16, UL_TFC46 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC1, UL_TFC15, UL_TFC16, UL_TFC30, UL_TFC31, UL_TFC45, UL_TFC46 |
RB5: 39 RB6: No data RB7: No data RB8: No data RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: No data RB9: 312 |
|
14 |
DL_TFC14, DL_TFC38 |
UL_TFC17, UL_TFC47 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC2, UL_TFC15, UL_TFC17, UL_TFC30, UL_TFC32, UL_TFC45, UL_TFC47 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data RB9: 312 |
|
15 |
DL_TFC15, DL_TFC39 |
UL_TFC21, UL_TFC51 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC6, UL_TFC15, UL_TFC21, UL_TFC30, UL_TFC36, UL_TFC45, UL_TFC51 |
RB5: No data RB6: No data RB7: No data RB8: 632 RB9: 312 |
RB5: No data RB6: No data RB7: No data RB8: 632 RB9: 312 |
|
16 |
DL_TFC16, DL_TFC40 |
UL_TFC22, UL_TFC52 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC1, UL_TFC6, UL_TFC7, UL_TFC15, UL_TFC16, UL_TFC21, UL_TFC22, UL_TFC30, UL_TFC31, UL_TFC36, UL_TFC37, UL_TFC45, UL_TFC46, UL_TFC51, UL_TFC52 |
RB5: 39 RB6: No data RB7: No data RB8: 632 RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 632 RB9: 312 |
|
17 |
DL_TFC17, DL_TFC41 |
UL_TFC23, UL_TFC53 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC2, UL_TFC6, UL_TFC8, UL_TFC15, UL_TFC17, UL_TFC21, UL_TFC23, UL_TFC30, UL_TFC32, UL_TFC36, UL_TFC38, UL_TFC45, UL_TFC47, UL_TFC51, UL_TFC53 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 632 RB9: 312 |
|
18 |
DL_TFC18, DL_TFC42 |
UL_TFC24, UL_TFC54 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC9, UL_TFC15, UL_TFC24, UL_TFC30, UL_TFC39, UL_TFC45, UL_TFC54 |
RB5: No data RB6: No data RB7: No data RB8: 1272 RB9: 312 |
RB5: No data RB6: No data RB7: No data RB8: 1272 RB9: 312 |
|
19 |
DL_TFC19, DL_TFC43 |
UL_TFC25, UL_TFC55 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC1, UL_TFC9, UL_TFC10, UL_TFC15, UL_TFC16, UL_TFC24, UL_TFC25, UL_TFC30, UL_TFC31, UL_TFC39, UL_TFC40, UL_TFC45, UL_TFC46, UL_TFC54, UL_TFC55 |
RB5: 39 RB6: No data RB7: no data RB8: 1272 RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 1272 RB9: 312 |
|
20 |
DL_TFC20, DL_TFC44 |
UL_TFC26, UL_TFC56 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC2, UL_TFC9, UL_TFC11, UL_TFC15, UL_TFC17, UL_TFC24, UL_TFC26, UL_TFC30, UL_TFC32, UL_TFC39, UL_TFC41, UL_TFC45, UL_TFC47, UL_TFC54, UL_TFC56 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1272 RB9: 312 |
|
21 |
DL_TFC21, DL_TFC45 |
UL_TFC27, UL_TFC57 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC12 UL_TFC15, UL_TFC27, UL_TFC30, UL_TFC42, UL_TFC45, UL_TFC57 |
RB5: No data RB6: No data RB7: No data RB8: 2552 RB9: 312 |
RB5: No data RB6: No data RB7: No data RB8: 2552 RB9: 312 |
|
22 |
DL_TFC22, DL_TFC46 |
UL_TFC28, UL_TFC58 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC1, UL_TFC12, UL_TFC13, UL_TFC15, UL_TFC16, UL_TFC27, UL_TFC28, UL_TFC30, UL_TFC31, UL_TFC42, UL_TFC43, UL_TFC45, UL_TFC46, UL_TFC57, UL_TFC58 |
RB5: 39 RB6: No data RB7: No data RB8: 2552 RB9: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 2552 RB9: 312 |
|
23 |
DL_TFC23, DL_TFC47 |
UL_TFC29, UL_TFC59 |
DL_TFC0, DL_TFC24, UL_TFC0, UL_TFC30 |
UL_TFC0, UL_TFC2, UL_TFC12, UL_TFC14, UL_TFC15, UL_TFC17, UL_TFC27, UL_TFC29, UL_TFC30, UL_TFC32, UL_TFC42, UL_TFC44, UL_TFC45, UL_TFC47, UL_TFC57, UL_TFC59 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 RB9: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2552 RB9: 312 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.71.4 Test requirements
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7, RB8 and RB9.
– for sub-test 2: an RLC SDU on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8 and RB9.
– for sub-test 3: an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by sent by SS in downlink; and no data shall be received on RB5, RB6, RB7 and RB9.
– for sub-test 4: an RLC SDU on RB8 having the content equal to the first 312 bits of the test data sent by sent by SS; an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 5, 8, 11: an RLC SDU on RB5, RB6, RB7 and RB8 having the same content as sent by SS; and no data shall be received on RB9.
– for sub-test 6, 9: an RLC SDU on RB8 having the same content as sent by SS in downlink; and no data shall be received on RB5, RB6, RB7 and RB9.
– for sub-test 7, 10: an RLC SDU on RB5 having the content equal to the content of the test data sent by the SS in downlink; an RLC SDU on RB8 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB9.
– for sub-test 12: an RLC SDU on RB9 having the same content as sent by SS; and no data shall be received on RB5, RB6, RB7, RB8 .
– for sub-test 13: an RLC SDU on RB5 and RB9 having the same content as sent by SS; and no data shall be received on RB6, RB7, RB8.
– for sub-test 14: an RLC SDU on RB5, RB6, RB7 and RB9 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 15, 18, 21: an RLC SDU on RB8 and RB9 having the same content as sent by SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 16, 19, 22: an RLC SDU on RB5, RB8 and RB9 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
– for sub-test 17, 20, 23: an RLC SDU on RB5, RB6, RB7, RB8 and RB9 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.72 Interactive or background / UL:64 DL:64 kbps / PS RAB + Interactive or background / UL:64 DL:64 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.72.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.72.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.57.
18.1.2.72.3 Method of test
See 18.1.1.2 for test procedure. However, in this test the RM attribute values used shall be derived separately in the UL and DL as the mid-values of the RM attribute value ranges as specified by the reference radio bearer configuration.
Specific Message Content:
Use the RADIO BEARER SETUP message as defined in [9] TS 34.108 clause 9, with the following exceptions:
|
Information Element |
Value/remark |
|---|---|
|
– RAB information for setup – RAB info |
(AM DTCH for PS domain) |
|
– RAB identity |
0000 0101B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity. |
|
– CN domain identity |
PS domain |
|
– NAS Synchronization Indicator |
Not Present |
|
– Re-establishment timer |
useT315 |
|
– RB information to setup |
|
|
– RB identity |
20 |
|
– PDCP Info |
Not Present |
|
– CHOICE RLC info type – CHOICE Uplink RLC mode |
RLC info AM RLC |
|
– Transmission RLC discard – CHOICE SDU discard mode – MAX_DAT |
No Discard 15 |
|
– Transmission window size – Timer_RST |
128 500 |
|
– Max_RST |
4 |
|
– Polling info |
|
|
– Timer_poll_prohibit |
200 |
|
– Timer_poll |
200 |
|
– Poll_PDU |
Not Present |
|
– Poll_SDU |
4 |
|
– Last transmission PDU poll |
TRUE |
|
– Last retransmission PDU poll |
TRUE |
|
– Poll_Windows |
99 |
|
– Timer_poll_periodic |
Not Present |
|
– CHOICE Downlink RLC mode |
AM RLC |
|
– In-sequence delivery |
TRUE |
|
– Receiving window size |
128 |
|
– Downlink RLC status info |
|
|
– Timer_status_prohibit |
200 |
|
– Timer_EPC |
Not Present |
|
– Missing PDU indicator |
TRUE |
|
– Timer_STATUS_periodic |
Not Present |
|
– RB mapping info |
|
|
– Information for each multiplexing option |
2 RBMuxOptions |
|
– RLC logical channel mapping indicator |
Not Present |
|
– Number of uplink RLC logical channels |
1 |
|
– Uplink transport channel type |
DCH |
|
– UL Transport channel identity |
1 |
|
– Logical channel identity |
7 |
|
– CHOICE RLC size list |
Configured |
|
– MAC logical channel priority |
8 |
|
– Downlink RLC logical channel info |
|
|
– Number of downlink RLC logical channels |
1 |
|
– Downlink transport channel type |
DCH |
|
– DL DCH Transport channel identity |
6 |
|
– DL DSCH Transport channel identity |
Not Present |
|
– Logical channel identity |
7 |
|
– RLC logical channel mapping indicator |
Not Present |
|
– Number of uplink RLC logical channels |
1 |
|
– Uplink transport channel type |
RACH |
|
– UL Transport channel identity |
Not Present |
|
– Logical channel identity |
7 |
|
– CHOICE RLC size list |
Explicit list |
|
– RLC size index |
Reference to TS34.108 clause 6 Parameter Set |
|
– MAC logical channel priority |
8 |
|
– Downlink RLC logical channel info |
|
|
– Number of downlink RLC logical channels |
1 |
|
– Downlink transport channel type |
FACH |
|
– DL DCH Transport channel identity |
Not Present |
|
– DL DSCH Transport channel identity |
Not Present |
|
– Logical channel identity |
7 |
|
– RAB identity |
0000 0110B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity. |
|
– CN domain identity |
PS domain |
|
– NAS Synchronization Indicator |
Not Present |
|
– Re-establishment timer |
useT315 |
|
– RB information to setup |
|
|
– RB identity |
22 |
|
– PDCP info |
Not Present |
|
– CHOICE RLC info type |
RLC info |
|
– CHOICE Uplink RLC mode |
AM RLC |
|
– Transmission RLC discard |
|
|
– CHOICE SDU discard mode |
No Discard |
|
– MAX_DAT |
15 |
|
– Transmission window size |
128 |
|
– Timer_RST |
500 |
|
– Max_RST |
4 |
|
– Polling info |
|
|
– Timer_poll_prohibit |
200 |
|
– Timer_poll |
200 |
|
– Poll_PDU |
Not Present |
|
– Poll_SDU |
4 |
|
– Last transmission PDU poll |
TRUE |
|
– Last retransmission PDU poll |
TRUE |
|
– Poll_Windows |
99 |
|
– Timer_poll_periodic |
Not Present |
|
– CHOICE Downlink RLC mode |
AM RLC |
|
– In-sequence delivery |
TRUE |
|
– Receiving window size |
128 |
|
– Downlink RLC status info |
|
|
– Timer_status_prohibit |
200 |
|
– Timer_EPC |
Not Present |
|
– Missing PDU indicator |
TRUE |
|
– Timer_STATUS_periodic |
Not Present |
|
– RB mapping info |
|
|
– Information for each multiplexing option |
2 RBMuxOptions |
|
– RLC logical channel mapping indicator |
Not Present |
|
– Number of uplink RLC logical channels |
1 |
|
– Uplink transport channel type |
DCH |
|
– UL Transport channel identity |
1 |
|
– Logical channel identity |
8 |
|
– CHOICE RLC size list |
Configured |
|
– MAC logical channel priority |
8 |
|
– Downlink RLC logical channel info |
|
|
– Number of downlink RLC logical channels |
1 |
|
– Downlink transport channel type |
DCH |
|
– DL DCH Transport channel identity |
6 |
|
– DL DSCH Transport channel identity |
Not Present |
|
– Logical channel identity |
8 |
|
– RLC logical channel mapping indicator |
Not Present |
|
– Number of uplink RLC logical channels |
1 |
|
– Uplink transport channel type |
RACH |
|
– UL Transport channel identity |
Not Present |
|
– Logical channel identity |
8 |
|
– CHOICE RLC size list |
Explicit list |
|
– RLC size index |
Reference to TS34.108 clause 6 Parameter Set |
|
– MAC logical channel priority |
8 |
|
– Downlink RLC logical channel info |
|
|
– Number of downlink RLC logical channels |
1 |
|
– Downlink transport channel type |
FACH |
|
– DL DCH Transport channel identity |
Not Present |
|
– DL DSCH Transport channel identity |
Not Present |
|
– Logical channel identity |
8 |
Uplink TFS:
|
TFI |
RB5 + RB6 |
DCCH |
|
|
TFS |
TF0, bits |
0x340 |
0x148 |
|
TF1, bits |
1×340 |
1×148 |
|
|
TF2, bits |
2×340 |
N/A |
|
|
TF3, bits |
3×340 |
N/A |
|
|
TF4, bits |
4×340 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5 + RB6, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 + RB6 (64 kbps RAB, 20 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x340 |
0x148 |
|
TF1, bits |
1×340 |
1×148 |
|
|
TF2, bits |
2×340 |
N/A |
|
|
TF3, bits |
3×340 |
N/A |
|
|
TF4, bits |
4×340 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5 + RB6, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF0, TF1) |
|
DL_TFC6 |
(TF1, TF1) |
|
DL_TFC7 |
(TF2, TF1) |
|
DL_TFC8 |
(TF3, TF1) |
|
DL_TFC9 |
(TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs (note 1) |
UL RLC SDU size (bits) (note 2) |
Test data size (bits) (note 2) |
|
1 |
DL_TFC1 DL_TFC6 |
UL_TFC1 DL_TFC6 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 312 RB6: 312 |
RB5: 312 RB6: No data |
|
2 |
DL_TFC2 DL_TFC7 |
UL_TFC2 DL_TFC7 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 632 RB6: 632 |
RB5: 632 RB6: No data |
|
3 |
DL_TFC3 DL_TFC8 |
UL_TFC3 DL_TFC8 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 952 RB6: 952 |
RB5: 952 RB6: No data |
|
4 |
DL_TFC4 DL_TFC9 |
UL_TFC4 DL_TFC9 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 1272 RB6: 1272 |
RB5: 1272 RB6: No data |
|
5 |
DL_TFC4 DL_TFC9 |
UL_TFC4 DL_TFC9 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 1272 RB5: 1272 |
RB5: No data RB6: 1272 |
|
NOTE 1: UL_TFC0, UL_TFC1 and UL_TFC5 are part of minimum set of TFCIs. NOTE 2: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.72.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1 to 4: RLC SDUs on RB5 having the same content as the DL RLC SDUs sent by the SS in RB5.
– for sub-test 5: RLC SDUs on RB6 having the same content as the DL RLC SDUs sent by the SS in RB6.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
18.1.2.73 Interactive or background / UL:64 DL:64 kbps / PS RAB + Interactive or background / UL:64 DL:64 kbps / PS RAB + Interactive or background / UL:64 DL:64 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
18.1.2.73.1 Conformance requirement
See 18.1.2.4.1.
18.1.2.73.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.11.5.4.1.70.
18.1.2.73.3 Method of test
Uplink TFS:
|
TFI |
RB5 + RB6 +RB7) |
DCCH |
|
|
TFS |
TF0, bits |
0x340 |
0x148 |
|
TF1, bits |
1×340 |
1×148 |
|
|
TF2, bits |
2×340 |
N/A |
|
|
TF3, bits |
3×340 |
N/A |
|
|
TF4, bits |
4×340 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5 + RB6 + RB7, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF3, TF0) |
|
UL_TFC4 |
(TF4, TF0) |
|
UL_TFC5 |
(TF0, TF1) |
|
UL_TFC6 |
(TF1, TF1) |
|
UL_TFC7 |
(TF2, TF1) |
|
UL_TFC8 |
(TF3, TF1) |
|
UL_TFC9 |
(TF4, TF1) |
Downlink TFS:
|
TFI |
RB5 + RB6 + RB7 (64 kbps RAB, 20 ms TTI) |
DCCH |
|
|
TFS |
TF0, bits |
0x340 |
0x148 |
|
TF1, bits |
1×340 |
1×148 |
|
|
TF2, bits |
2×340 |
N/A |
|
|
TF3, bits |
3×340 |
N/A |
|
|
TF4, bits |
4×340 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5 + RB6 + RB7, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF3, TF0) |
|
DL_TFC4 |
(TF4, TF0) |
|
DL_TFC5 |
(TF0, TF1) |
|
DL_TFC6 |
(TF1, TF1) |
|
DL_TFC7 |
(TF2, TF1) |
|
DL_TFC8 |
(TF3, TF1) |
|
DL_TFC9 |
(TF4, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs (note 1) |
UL RLC SDU size (bits) (note 2) |
Test data size (bits) (note 2) |
|
1 |
DL_TFC1 DL_TFC6 |
UL_TFC1 DL_TFC6 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC5, UL_TFC6 |
RB5: 312 RB6: 312 RB7: 312 |
RB5: 312 RB6: No data RB7: No data |
|
2 |
DL_TFC2 DL_TFC7 |
UL_TFC2 DL_TFC7 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC5, UL_TFC7 |
RB5: 632 RB6: 632 RB7: 632 |
RB5: 632 RB6: No data RB7: No data |
|
3 |
DL_TFC3 DL_TFC8 |
UL_TFC3 DL_TFC8 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC5, UL_TFC8 |
RB5: 952 RB6: 952 RB7: 952 |
RB5: 952 RB6: No data RB7: No data |
|
4 |
DL_TFC4 DL_TFC9 |
UL_TFC4 DL_TFC9 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 1272 RB6: 1272 RB7: 1272 |
RB5: 1272 RB6: No data RB7: No data |
|
5 |
DL_TFC4 DL_TFC9 |
UL_TFC4 DL_TFC9 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 1272 RB6: 1272 RB7: 1272 |
RB5: No data RB6: 1272 RB7: No data |
|
6 |
DL_TFC4 DL_TFC9 |
UL_TFC4 DL_TFC9 |
DL_TFC0, DL_TFC5, UL_TFC0, UL_TFC5 |
UL_TFC0, UL_TFC1, UL_TFC4, UL_TFC5, UL_TFC9 |
RB5: 1272 RB6: 1272 RB7: 1272 |
RB5: No data RB6: No data RB7: 1272 |
|
NOTE 1: UL_TFC0, UL_TFC1 and UL_TFC5 are part of minimum set of TFCIs. NOTE 2: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
18.1.2.73.4 Test requirements
See 18.1.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1 to 4: RLC SDUs on RB5 having the same content as the DL RLC SDUs sent by the SS in RB5.
– for sub-test 5: RLC SDUs on RB6 having the same content as the DL RLC SDUs sent by the SS in RB6.
– for sub-test 6: RLC SDUs on RB6 having the same content as the DL RLC SDUs sent by the SS in RB7.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.