14.6.6c Streaming / unknown / UL:128 DL: [guaranteed 128, max bit rate depending on UE category] with Fixed RLC and MAC-ehs / PS RAB + Interactive or background / UL:128 DL: [max bit rate depending on UE category] with Flexible RLC and MAC-ehs / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH / DL: QPSK, 16QAM and MIMO

34.123-13GPPPart 1: Protocol conformance specificationRelease 15TSUser Equipment (UE) conformance specification

14.6.6c.1 Conformance requirement

See 14.6.1.1.

14.6.6c.2 Test purpose

To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.5.6 for the QPSK, 16QAM and MIMO case using the downlink enhanced Layer 2 configuration with MAC-ehs and combination of Fixed and Flexible RLC.

14.6.6c.3 Method of test

NOTE: The reference to UE Categories refers to the UE capability as signalled in the Rel-7 IE “HS-DSCH physical layer category extension”. This IE corresponds to the HS-DSCH category supported by the UE when MAC-ehs is configured.

The Streaming / unknown / UL:128 DL: [guaranteed 128, max bit rate depending on UE category] with Fixed RLC and MAC-ehs / PS RAB is referred to as RB5. The Interactive or background / UL:128 DL: [max bit rate depending on UE category] with Flexible RLC and MAC-ehs / PS RAB is referred to as RB6.

The following parameters are specific for this test case and RB5 and RB6:

Parameter

Value

Comments

Radio bearer

TS 34.108, clause 6.10.2.4.5.6 using downlink MAC-d flow parameters according to Alt 2 (Fixed RLC and MAC-ehs) for RB5 and MAC-d flow parameters according to Alt 3 (Flexible RLC and MAC-ehs) for RB6

MAC-ehs receiver window size

16

MIMO N_cqi_typeA/M_cqi ratio

1/1

25.331, 10.3.6.41a

Second CPICH pattern

Antenna1 S-CPICH

25.331, 10.3.6.41b

S-CPICH Channelisation code

12

precodingWeightIndicator, W2

00

25.212, Table 14A

RLC Transmission window size

See sub-test table

RLC Receiving window size

See sub-test table

The generic test procedure in 14.1.3.5a is run for each sub-test for test execution 1 and 2.

Execution counter

Downlink Modulation Scheme (M1)

MIMO data flow#1

Downlink Modulation Scheme (M2)

MIMO data flow#2

MIMO

1

QPSK

QPSK

Yes

2

16QAM

16QAM

Yes

3

16QAM

QPSK

Yes

Uplink TFS:

TFI

RB5

(Streaming

128 kbps, 20ms)

RB6

(I/B

128 kbps, 20ms)

DCCH

TFS

TF0, bits

0x656

0x336

0x148

TF1, bits

1×656

1×336

1×148

TF2, bits

2×656

2×336

N/A

TF3, bits

4×656

4×336

N/A

TF4, bits

N/A

8×336

N/A

Uplink TFCS:

TFCI

(RB5 + RB6, DCCH)

UL_TFC0

(TF0, TF0, TF0)

UL_TFC1

(TF1, TF0, TF0)

UL_TFC2

(TF2, TF0, TF0)

UL_TFC3

(TF3, TF0, TF0)

UL_TFC4

(TF0, TF1, TF0)

UL_TFC5

(TF1, TF1, TF0)

UL_TFC6

(TF2, TF1, TF0)

UL_TFC7

(TF3, TF1, TF0)

UL_TFC8

(TF0, TF2, TF0)

UL_TFC9

(TF1, TF2, TF0)

UL_TFC10

(TF2, TF2, TF0)

UL_TFC11

(TF3, TF2, TF0)

UL_TFC12

(TF0, TF3, TF0)

UL_TFC13

(TF1, TF3, TF0)

UL_TFC14

(TF2, TF3, TF0)

UL_TFC15

(TF3, TF3, TF0)

UL_TFC16

(TF0, TF4, TF0)

UL_TFC17

(TF1, TF4, TF0)

UL_TFC18

(TF2, TF4, TF0)

UL_TFC19

(TF3, TF4, TF0)

UL_TFC20

(TF0, TF0, TF1)

UL_TFC21

(TF1, TF0, TF1)

UL_TFC22

(TF2, TF0, TF1)

UL_TFC23

(TF3, TF0, TF1)

UL_TFC24

(TF0, TF1, TF1)

UL_TFC25

(TF1, TF1, TF1)

UL_TFC26

(TF2, TF1, TF1)

UL_TFC27

(TF3, TF1, TF1)

UL_TFC28

(TF0, TF2, TF1)

UL_TFC29

(TF1, TF2, TF1)

UL_TFC30

(TF2, TF2, TF1)

UL_TFC31

(TF3, TF2, TF1)

UL_TFC32

(TF0, TF3, TF1)

UL_TFC33

(TF1, TF3, TF1)

UL_TFC34

(TF2, TF3, TF1)

UL_TFC35

(TF3, TF3, TF1)

UL_TFC36

(TF0, TF4, TF1)

UL_TFC37

(TF1, TF4, TF1)

UL_TFC38

(TF2, TF4, TF1)

UL_TFC39

(TF3, TF4, TF1)

Sub-tests:

The principle used to select sub-tests has been to cover all uplink and downlink TFS for the Streaming + Interactive Background PS radio bearer. The Streaming UL:128 kbps + Interactive Background UL:128 kbps radio bearer (RB5+RB6) have 40 transport format combinations. As the transport formats where RB5, RB6 or DCCH has no data (TF0 for RB5, RB6 or DCCH) is considered as implicitly tested when the transport format combinations with data is tested then no specific sub-tests for those transport format combinations have been specified. The selected UL TFCI to achieve test coverage of TF1 to TF3 for RB5 and TF1 to TF4 for RB6 are: UL_TFC5 to UL_TFC7, UL_TFC9 to UL_TFC11, UL_TFC13 to UL_TFC15 and UL_TFC17 to UL_TFC19.

Sub-tes

UE Category

Number of HARQ processes

RLC Receiving window size

(note 1)

RLC Trans-mission window size (note 1)

MAC-d PDU size (bits)

Downlink TFCS Under test

Uplink TFCS Under test

Implicitly tested

Restricted UL TFCIs

(note 2)

UL RLC SDU size (bits)

(note 3)

Test data size (bits)

(note 4)

1

15-20

12

2047

512

RB5:336

RB6: Flexible

N/A

UL_TFC5

UL_TFC0,

UL_TFC1,

UL_TFC4,

UL_TFC20,

UL_TFC21

UL_TFC0,

UL_TFC1,

UL_TFC4,

UL_TFC5,

UL_TFC20,

UL_TFC21,

UL_TFC24,

UL_TFC25

RB5: 632

RB6: 312

See note 4

2

15-20

12

1024

1024

RB5: 656

RB6: Flexible

N/A

UL_TFC6

UL_TFC0,

UL_TFC2,

UL_TFC4,

UL_TFC20,

UL_TFC6

UL_TFC0,

UL_TFC1,

UL_TFC2,

UL_TFC4,

UL_TFC6,

UL_TFC20,

UL_TFC21,

UL_TFC24,

UL_TFC26

RB5: 1272

RB6: 312

See note 4

3

15-20

16

2047

1024

RB5:336

RB6: Flexible

N/A

UL_TFC7

UL_TFC0,

UL_TFC3,

UL_TFC4,

UL_TFC20,

UL_TFC6

UL_TFC0,

UL_TFC1,

UL_TFC3,

UL_TFC4,

UL_TFC7,

UL_TFC20,

UL_TFC21,

UL_TFC24,

UL_TFC27

RB5: 2552

RB6: 312

See note 4

4

15-20

12

1024

1024

RB5: 656

RB6: Flexible

N/A

UL_TFC9

UL_TFC0,

UL_TFC8,

UL_TFC4,

UL_TFC20,

UL_TFC6

UL_TFC0,

UL_TFC1,

UL_TFC4,

UL_TFC8,

UL_TFC9,

UL_TFC20,

UL_TFC21,

UL_TFC24,

UL_TFC29

RB5: 632

RB6: 632

See note 4

5

15-20

12

2047

1024

RB5: 656

RB6: Flexible

N/A

UL_TFC10

UL_TFC0,

UL_TFC2,

UL_TFC8,

UL_TFC4,

UL_TFC20,

UL_TFC6

UL_TFC0,

UL_TFC1,

UL_TFC2,

UL_TFC4,

UL_TFC8,

UL_TFC10,

UL_TFC20,

UL_TFC21,

UL_TFC24,

UL_TFC30

RB5: 1272

RB6: 632

See note 4

6

15-20

12

1024

1024

RB5: 656

RB6: Flexible

N/A

UL_TFC11

UL_TFC0,

UL_TFC3,

UL_TFC8,

UL_TFC4,

UL_TFC20,

UL_TFC6

UL_TFC0,

UL_TFC1,

UL_TFC3,

UL_TFC4,

UL_TFC8,

UL_TFC11,

UL_TFC20,

UL_TFC21,

UL_TFC24,

UL_TFC31

RB5: 2552

RB6: 632

See note 4

7

15-20

12

2047

1024

RB5: 656

RB6: Flexible

N/A

UL_TFC13

UL_TFC0,

UL_TFC1,

UL_TFC12,

UL_TFC4,

UL_TFC20,

UL_TFC6

UL_TFC0,

UL_TFC1,

UL_TFC4,

UL_TFC12,

UL_TFC13,

UL_TFC20,

UL_TFC21,

UL_TFC24,

UL_TFC33

RB5: 632

RB6: 1272

See note 4

8

15-20

12

1024

1024

RB5: 656

RB6: Flexible

N/A

UL_TFC14

UL_TFC0,

UL_TFC2,

UL_TFC12,

UL_TFC4,

UL_TFC20,

UL_TFC6

UL_TFC0,

UL_TFC1,

UL_TFC2,

UL_TFC4,

UL_TFC12,

UL_TFC14,

UL_TFC20,

UL_TFC21,

UL_TFC24,

UL_TFC34

RB5: 1272

RB6: 1272

See note 4

9

15-20

12

2047

1024

RB5: 656

RB6: Flexible

N/A

UL_TFC15

UL_TFC0,

UL_TFC3,

UL_TFC12,

UL_TFC4,

UL_TFC20,

UL_TFC6

UL_TFC0,

UL_TFC1,

UL_TFC3,

UL_TFC4,

UL_TFC12,

UL_TFC15,

UL_TFC20,

UL_TFC21,

UL_TFC24,

UL_TFC35

RB5: 2552

RB6: 1272

See note 4

10

15-20

12

1024

1024

RB5: 656

RB6: Flexible

N/A

UL_TFC17

UL_TFC0,

UL_TFC1,

UL_TFC16,

UL_TFC4,

UL_TFC20,

UL_TFC6

UL_TFC0,

UL_TFC1,

UL_TFC4,

UL_TFC16,

UL_TFC17,

UL_TFC20,

UL_TFC21,

UL_TFC24,

UL_TFC37

RB5: 632

RB6: 2552

See note 4

11

15-20

12

2047

1024

RB5: 656

RB6: Flexible

N/A

UL_TFC18

UL_TFC0,

UL_TFC8,

UL_TFC16,

UL_TFC4,

UL_TFC20,

UL_TFC6

UL_TFC0,

UL_TFC1,

UL_TFC4,

UL_TFC8,

UL_TFC16,

UL_TFC18,

UL_TFC20,

UL_TFC21,

UL_TFC24,

UL_TFC38

RB5: 1272

RB6: 2552

See note 4

12

15-20

12

1024

1024

RB5: 656

RB6: Flexible

N/A

UL_TFC19

UL_TFC0,

UL_TFC3,

UL_TFC16,

UL_TFC4,

UL_TFC20,

UL_TFC6

UL_TFC0,

UL_TFC1,

UL_TFC3,

UL_TFC4,

UL_TFC16,

UL_TFC19,

UL_TFC20,

UL_TFC21,

UL_TFC24,

UL_TFC39

RB5: 2552

RB6: 2552

See note 4

NOTE 1: The SS shall configure the RLC transmission and receiver window size depending on the UE category. The values are set to cope with the number of SDUs used in the sub-test and within the UE capabilities for the actual UE category under test.

NOTE 2: UL_TFC0, UL_TFC1, UL_TFC4 and UL_TFC20 are part of minimum set of TFCIs. Also the transport format combinations UL_TFC21 and UL_TFC24 using TF1 on either RB5 or RB6 and TF1 on DCCH has been included in the allowed TFCs as those could happen during the sub-test.

NOTE 3: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs.
RB5 and RB6: The UL RLC SDU size is set to N*UL RLC payload size minus 8 bits (size of 7 bit length indicator and expansion bit) , where N is the number of transport blocks for the UL transport format under test. This will make the UE to return one RLC SDU per UL TTI.

NOTE 4: The test data size for RB5 and RB6 is dependent on the actual TFRC test point, see the generic test procedure in 14.1.3.5a.

NOTE 5: For Subtest 3, when 16QAM/16QAM modulation is executed, test points 33 and above are not applicable.

14.6.6c.4 Test requirements

See 14.1.3.5a for definition of the referenced step numbers.

1. At step 12 the UE shall send RADIO BEARER SETUP COMPLETE.

2. At steps 17 to 20 the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.

3. At step 18 and for each TFRC test point:

The UE shall for each radio bearer return the equal number RLC SDUs as sent by the SS in downlink. If the downlink RLC SDU size is less than the configured UL RLC SDU for the actual sub-test then the UE shall return RLC SDUs where the first bits of each SDU has the same content as the RLC SDUs sent by the SS in downlink. Otherwise the UE shall return RLC SDUs where the SDU has the same content as the first bits of the RLC SDUs sent by the SS in downlink.

NOTE: The generic test procedure as specified in 14.1.3.5a sends either 2 SDU or 8 SDUs depending on the transport block size under tests. For the case when the downlink SDU size is less than the configured UL SDU size then all data is returned otherwise the returned data is truncated.