14.2.58 Streaming / unknown / UL:16 DL:64 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH.

34.123-13GPPPart 1: Protocol conformance specificationRelease 15TSUser Equipment (UE) conformance specification

14.2.58.1 Conformance requirement

See 14.2.4.1.

14.2.58.2 Test purpose

Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.58.

14.2.58.3 Method of test

See 14.1.2 for test procedure. However, in this test the RM attribute values used shall be derived separately in the UL and DL as the mid-values of the RM attribute value ranges as specified by the reference radio bearer configuration.

Uplink TFS:

TFI

RB5 uplink (16 kbps,

20 ms TTI)

RB6

(8 kbps)

DCCH

TFS

TF0, bits

0x336

0x336

0x148

TF1, bits

1×336

1×336

1×148

Uplink TFCS:

TFCI

(RB5, RB6, DCCH)

UL_TFC0

(TF0, TF0, TF0)

UL_TFC1

(TF1, TF0, TF0)

UL_TFC2

(TF0, TF1, TF0)

UL_TFC3

(TF1, TF1, TF0)

UL_TFC4

(TF0, TF0, TF1)

UL_TFC5

(TF1, TF0, TF1)

UL_TFC6

(TF0, TF1, TF1)

UL_TFC7

(TF1, TF1, TF1)

Downlink TFS:

TFI

RB5
(64 kbps,

40 ms TTI)

RB6
(8 kbps)

DCCH

TFS

TF0, bits

0x656

0x336

0x148

TF1, bits

1×656

1×336

1×148

TF2, bits

2×656

N/A

N/A

TF3, bits

4×656

N/A

N/A

Downlink TFCS:

TFCI

(RB5, RB6, DCCH)

DL_TFC0

(TF0, TF0, TF0)

DL_TFC1

(TF1, TF0, TF0)

DL_TFC2

(TF2, TF0, TF0)

DL_TFC3

(TF3, TF0, TF0)

DL_TFC4

(TF0, TF1, TF0)

DL_TFC5

(TF1, TF1, TF0)

DL_TFC6

(TF2, TF1, TF0)

DL_TFC7

(TF3, TF1, TF0)

DL_TFC8

(TF0, TF0, TF1)

DL_TFC9

(TF1, TF0, TF1)

DL_TFC10

(TF2, TF0, TF1)

DL_TFC11

(TF3, TF0, TF1)

DL_TFC12

(TF0, TF1, TF1)

DL_TFC13

(TF1, TF1, TF1)

DL_TFC14

(TF2, TF1, TF1)

DL_TFC15

(TF3, TF1, TF1)

Sub-tests:

Sub-test

Downlink TFCS

Under

Test

Uplink TFCS

Under test

Implicitly tested

Restricted UL TFCIs

(note 1)

UL RLC SDU size

(bits)

(note 2)

Test data size

(bits)

(note 2)

1

DL_TFC1,

DL_TFC9

UL_TFC1, UL_TFC5

DL_TFC0, DL_TFC8,

UL_TFC0, UL_TFC4

UL_TFC0,
UL_TFC1,

UL_TFC2,

UL_TFC4,
UL_TFC5

RB5: 632
RB6: 312

RB5: 632

RB6: no data

2

DL_TFC2,

DL_TFC10

UL_TFC1, UL_TFC5

DL_TFC0,

DL_TFC1,

DL_TFC8,

UL_TFC0, UL_TFC4

UL_TFC0,
UL_TFC1,

UL_TFC2,

UL_TFC4,
UL_TFC5

RB5: 632
RB6: 312

RB5: 1272

RB6: no data

3

DL_TFC3, DL_TFC11

UL_TFC1, UL_TFC5

DL_TFC0,

DL_TFC1,

DL_TFC8,

UL_TFC0, UL_TFC4

UL_TFC0,
UL_TFC1,

UL_TFC2,

UL_TFC4,
UL_TFC5

RB5: 632
RB6: 312

RB5: 2552

RB6: no data

4

DL_TFC4, DL_TFC12

UL_TFC2, UL_TFC6

DL_TFC0, DL_TFC8,

UL_TFC0, UL_TFC4

UL_TFC0,
UL_TFC1,

UL_TFC2,
UL_TFC4,
UL_TFC6

RB5: 632

RB6: 312

RB5: no data

RB6: 312

5

DL_TFC5,

DL_TFC13

UL_TFC3, UL_TFC7

DL_TFC0,

DL_TFC1,

DL_TFC4,

DL_TFC8,

UL_TFC0, UL_TFC4

UL_TFC0,
UL_TFC1,
UL_TFC2,
UL_TFC3,
UL_TFC4,
UL_TFC5,
UL_TFC6,

UL_TFC7

RB5: 632

RB6: 312

RB5: 632

RB6: 312

6

DL_TFC6,

DL_TFC14

UL_TFC3, UL_TFC7

DL_TFC0,

DL_TFC1,

DL_TFC2,

DL_TFC4,

DL_TFC5,

DL_TFC8,

UL_TFC0, UL_TFC4

UL_TFC0,
UL_TFC1,
UL_TFC2,
UL_TFC3,
UL_TFC4,
UL_TFC5,
UL_TFC6,

UL_TFC7

RB5: 632

RB6: 312

RB5: 1272

RB6: 312

7

DL_TFC7, DL_TFC15

UL_TFC3, UL_TFC7

DL_TFC0,

DL_TFC1,

DL_TFC3

DL_TFC4,

DL_TFC5,

DL_TFC8,

UL_TFC0, UL_TFC4

UL_TFC0,
UL_TFC1,
UL_TFC2,

UL_TFC3,
UL_TFC4,
UL_TFC5,
UL_TFC6,

UL_TFC7

RB5: 632

RB6: 312

RB5: 2552

RB6: 312

NOTE 1: UL_TFC0, UL_TFC1, UL_TFC2 and UL_TFC4 are part of minimum set of TFCIs.

NOTE 2: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs.
RB5: Test data size has been set to the payload size of the DL TF under test minus 8 bits (size of 7 bit length indicator and expansion bit). As the uplink TTI for RB5 is 20 ms while the downlink TTI is 40 ms then, to achieve continuous data transmission in uplink the size of the uplink RLC SDU has been set such that it will be transmitted over two subsequent TTIs, i.e. UL RLC SDU size has been set to two times the payload size of the UL TF under test minus 8 bits (the size of a 7 bit length indicator and expansion bit).
RB6: Test data size has been set to the payload size of the DL TF under test minus 8 bits (size of 7 bit length indicator and expansion bit). The UL RLC SDU size has been set equal to the uplink TFS size minus 8 bits (the size of a 7 bit length indicator and expansion bit).

14.2.58.4 Test requirements

See 14.1.2 for definition of step 10 and step 15.

1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.

2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.

3. At step 15a and step 15b the UE shall return

– for sub-test 1: RLC SDUs on RB5 having the same content as sent by the SS; and no data shall be received on RB6.

– for sub-test 2 and 3: RLC SDUs on RB5 having the first 632 bits equal to the content of the test data sent by the SS in downlink; and no data shall be received on RB6.

– for sub-test 4: RLC SDUs on RB6 having the same content as sent by the SS; and no data shall be received on RB5.

– for sub-test 5: RLC SDUs on RB5 and RB6 having the same content as sent by the SS.

– for sub-test 6 and 7: RLC SDUs on RB5 having the first 632 bits equal to the content of the test data sent by the SS in downlink; and RLC SDUs on RB6 having the same content as sent by the SS.

4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.