14.2.56 Interactive or background / UL:8 DL:8 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH.

34.123-13GPPPart 1: Protocol conformance specificationRelease 15TSUser Equipment (UE) conformance specification

14.2.56.1 Conformance requirement

See 14.2.4.1.

14.2.56.2 Test purpose

Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.56.

14.2.56.3 Method of test

See 14.1.2 for test procedure.

Uplink TFS:

TFI

RB5 + RB6

(2×8 kbps)

DCCH

TFS

TF0, bits

0x340

0x148

TF1, bits

1×340

1×148

Uplink TFCS:

TFCI

(RB5 + RB6, DCCH)

UL_TFC0

(TF0, TF0)

UL_TFC1

(TF1, TF0)

UL_TFC2

(TF0, TF1)

UL_TFC3

(TF1, TF1)

Downlink TFS:

RB5 + RB6

(2×8 kbps)

DCCH

TFS

TF0, bits

0x340

0x148

TF1, bits

1×340

1×148

Downlink TFCS:

TFCI

(RB5+RB6, DCCH)

DL_TFC0

(TF0, TF0)

DL_TFC1

(TF1, TF0)

DL_TFC2

(TF0, TF1)

DL_TFC3

(TF1, TF1)

Sub-tests:

Sub-test

Downlink TFCS

Under

Test

Uplink TFCS

Under test

Implicitly tested

Restricted UL TFCIs

(note 1)

UL RLC SDU size

(bits)

(note 2)

Test data size

(bits)

(note 2)

1

DL_TFC1, DL_TFC3

UL_TFC1, UL_TFC3

DL_TFC0, DL_TFC2,

UL_TFC0, UL_TFC2

UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3

RB5: 312

RB6: 312

RB5: 312

RB6: no data

2

DL_TFC1, DL_TFC3

UL_TFC1, UL_TFC3

DL_TFC0, DL_TFC2,

UL_TFC0, UL_TFC2

UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3

RB5: 312

RB6: 312

RB5: no data

RB6: 312

NOTE 1: UL_TFC0, UL_TFC1 and UL_TFC2 are part of minimum set of TFCIs.

NOTE 2: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs.
RB5 and RB6: Test data size has been set to the payload size of the DL TF under test minus 8 bits (size of 7 bit length indicator and expansion bit). The UL RLC SDU size has been set equal to the size of the payload size of the UL TF under test minus 8 bits (the size of 7 bit length indicator and expansion bit).

14.2.56.4 Test requirements

See 14.1.2 for definition of step 10 and step 15.

1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.

2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.

3. At step 15a and step 15b the UE shall return

– for sub-test 1: RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6.

– for sub-test 2: RLC SDUs on RB6; and no data shall be received on RB5.

4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.