14.2.4a Conversational / speech / UL:(12.2 7.95 5.9 4.75) DL:(12.2 7.95 5.9 4.75) kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
34.123-13GPPPart 1: Protocol conformance specificationRelease 15TSUser Equipment (UE) conformance specification
14.2.4a.1 Conformance requirement
See clause 14.2.4.1.
14.2.4a.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.4a.
14.2.4a.3 Method of test
See 14.1.1 for test procedure. However, in this test the RM attribute values used shall be derived separately in the UL and DL as the mid-values of the RM attribute value ranges as specified by the reference radio bearer configuration.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x148 |
|
TF1, bits |
1×39 |
1×53 |
1×60 |
1×148 |
|
|
TF2, bits |
1×42 |
1×63 |
N/A |
N/A |
|
|
TF3, bits |
1×55 |
1×84 |
N/A |
N/A |
|
|
TF4, bits |
1×75 |
1×103 |
N/A |
N/A |
|
|
TF5, bits |
1×81 |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7,DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF3, TF2, TF0, TF0) |
|
UL_TFC4 |
(TF4, TF3, TF0, TF0) |
|
UL_TFC5 |
(TF5, TF4, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF1) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF1) |
|
UL_TFC8 |
(TF2, TF1, TF0, TF1) |
|
UL_TFC9 |
(TF3, TF2, TF0, TF1) |
|
UL_TFC10 |
(TF4, TF3, TF0, TF1) |
|
UL_TFC11 |
(TF5, TF4, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x148 |
|
TF1, bits |
1×39 |
1×53 |
1×60 |
1×148 |
|
|
TF2, bits |
1×42 |
1×63 |
N/A |
N/A |
|
|
TF3, bits |
1×55 |
1×84 |
N/A |
N/A |
|
|
TF4, bits |
1×75 |
1×103 |
N/A |
N/A |
|
|
TF5, bits |
1×81 |
N/A |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF3, TF2, TF0, TF0) |
|
DL_TFC4 |
(TF4, TF3, TF0, TF0) |
|
DL_TFC5 |
(TF5, TF4, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF1) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF1) |
|
DL_TFC8 |
(TF2, TF1, TF0, TF1) |
|
DL_TFC9 |
(TF3, TF2, TF0, TF1) |
|
DL_TFC10 |
(TF4, TF3, TF0, TF1) |
|
DL_TFC11 |
(TF5, TF4, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs (note 1) |
UL RLC SDU size (note 2) |
Test data size (note 2) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC7 |
RB5: 39 bits RB6: 103 bits RB7: 60 bits |
RB5: 39 bits RB6: No data RB7: No data |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC8 |
RB5: 42 bits RB6: 53 bits RB7: 60 bits |
RB5: 42 bits RB6: 53 bits RB7: No data |
|
3 |
DL_TFC3 |
UL_TFC3 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC9 |
RB5: 55 bits RB6: 63 bits RB7: 60 bits |
RB5: 55 bits RB6: 63 bits RB7: No data |
|
4 |
DL_TFC4 |
UL_TFC4 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC10 |
RB5: 75 bits RB6: 84 bits RB7: 60 bits |
RB5: 75 bits RB6: 84 bits RB7: No data |
|
5 |
DL_TFC5 |
UL_TFC5 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC11 |
RB5: 81 bits RB6: 103 bits RB7: 60 bits |
RB5: 81 bits RB6: 103 bits RB7: 60 bits |
|
NOTE 1: UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5 and UL_TFC6 are part of minimum set of TFCIs. NOTE 2: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See clause 14.1.1 for test procedure.
14.2.4a.4 Test requirements
See 14.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×39).
– for sub-test 2: RB5/TF2 (1×42) and RB6/TF1 (1×53)
– for sub-test 3: RB5/TF3 (1×55) and RB6/TF2 (1×63)
– for sub-test 4: RB5/TF4 (1×75) and RB6/TF3 (1×84)
– for sub-test 5: RB5/TF5 (1×81), RB6/TF4 (1×103) and RB7/TF1 (1×60)
3. At step 15 the UE shall return
– for sub-test 1: an RLC SDU on RB5 having the same content as sent by SS; and no data shall be received on RB6 or RB7.
– for sub-test 2,3 and 4: an RLC SDU on RB5 and RB6 having the same content as sent by SS; and no data shall be received on RB7.
– for sub-test 5: an RLC SDU on each of RB5, RB6 and RB7 having the same content as sent by SS.