14.2.49a Conversational / speech / UL:(12.2 7.95 5.9 4.75) DL(12.2 7.95 5.9 4.75) kbps / CS RAB + Conversational / unknown / UL:64 DL:64 kbps / CS RAB+ UL:3.4 DL: 3.4 kbps SRBs for DCCH (20ms TTI)
34.123-13GPPPart 1: Protocol conformance specificationRelease 15TSUser Equipment (UE) conformance specification
14.2.49a.1 Conformance requirement
See 14.2.4.1.
14.2.49a.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.49a for 20ms TTI case.
14.2.49a.3 Method of test
See 14.1.2 for test procedure.
Initial Conditions
The following RLC Info parameter values shall be set by the SS for the Conversational / unknown / UL:64 DL:64 kbps / CS RAB (RB8):
Uplink RLC |
|
TM RLC |
|
Segmentation indication |
FALSE |
Transmission RLC discard |
|
CHOICE SDU Discard Mode |
|
Timer based no explicit |
|
Timer_discard |
100ms |
Downlink RLC |
|
TM RLC |
|
Segmentation indication |
FALSE |
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
Uplink TFS:
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps) |
DCCH |
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x640 |
0x148 |
TF1, bits |
1×39 |
1×53 |
1×60 |
2×640 |
1×148 |
|
TF2, bits |
1×42 |
1×63 |
N/A |
N/A |
N/A |
|
TF3, bits |
1×55 |
1×84 |
N/A |
N/A |
N/A |
|
TF4, bits |
1×75 |
1×103 |
N/A |
N/A |
N/A |
|
TF5, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Uplink TFCS:
TFCI |
(RB5, RB6, RB7, 64 kbps RAB, DCCH) |
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
UL_TFC2 |
(TF2, TF1, TF0, TF0, TF0) |
UL_TFC3 |
(TF3, TF2, TF0, TF0, TF0) |
UL_TFC4 |
(TF4, TF3, TF0, TF0, TF0) |
UL_TFC5 |
(TF5, TF4, TF1, TF0, TF0) |
UL_TFC6 |
(TF0, TF0, TF0, TF1, TF0) |
UL_TFC7 |
(TF1, TF0, TF0, TF1, TF0) |
UL_TFC8 |
(TF2, TF1, TF0, TF1, TF0) |
UL_TFC9 |
(TF3, TF2, TF0, TF1, TF0) |
UL_TFC10 |
(TF4, TF3, TF0, TF1, TF0) |
UL_TFC11 |
(TF5, TF4, TF1, TF1, TF0) |
UL_TFC12 |
(TF0, TF0, TF0, TF0, TF1) |
UL_TFC13 |
(TF1, TF0, TF0, TF0, TF1) |
UL_TFC14 |
(TF2, TF1, TF0, TF0, TF1) |
UL_TFC15 |
(TF3, TF2, TF0, TF0, TF1) |
UL_TFC16 |
(TF4, TF3, TF0, TF0, TF1) |
UL_TFC17 |
(TF5, TF4, TF1, TF0, TF1) |
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
UL_TFC20 |
(TF2, TF1, TF0, TF1, TF1) |
UL_TFC21 |
(TF3, TF2, TF0, TF1, TF1) |
UL_TFC22 |
(TF4, TF3, TF0, TF1, TF1) |
UL_TFC23 |
(TF5, TF4, TF1, TF1, TF1) |
Downlink TFS:
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps) |
DCCH |
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x640 |
0x148 |
TF1, bits |
1×39 |
1×53 |
1×60 |
2×640 |
1×148 |
|
TF2, bits |
1×42 |
1×63 |
N/A |
N/A |
N/A |
|
TF3, bits |
1×55 |
1×84 |
N/A |
N/A |
N/A |
|
TF4, bits |
1×75 |
1×103 |
N/A |
N/A |
N/A |
|
TF5, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Downlink TFCS:
TFCI |
(RB2, RB3, RB4, 64 kbps RAB, DCCH) |
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
DL_TFC2 |
(TF2, TF1, TF0, TF0, TF0) |
DL_TFC3 |
(TF3, TF2, TF0, TF0, TF0) |
DL_TFC4 |
(TF4, TF3, TF0, TF0, TF0) |
DL_TFC5 |
(TF5, TF4, TF1, TF0, TF0) |
DL_TFC6 |
(TF0, TF0, TF0, TF1, TF0) |
DL_TFC7 |
(TF1, TF0, TF0, TF1, TF0) |
DL_TFC8 |
(TF2, TF1, TF0, TF1, TF0) |
DL_TFC9 |
(TF3, TF2, TF0, TF1, TF0) |
DL_TFC10 |
(TF4, TF3, TF0, TF1, TF0) |
DL_TFC11 |
(TF5, TF4, TF1, TF1, TF0) |
DL_TFC12 |
(TF0, TF0, TF0, TF0, TF1) |
DL_TFC13 |
(TF1, TF0, TF0, TF0, TF1) |
DL_TFC14 |
(TF2, TF1, TF0, TF0, TF1) |
DL_TFC15 |
(TF3, TF2, TF0, TF0, TF1) |
DL_TFC16 |
(TF4, TF3, TF0, TF0, TF1) |
DL_TFC17 |
(TF5, TF4, TF1, TF0, TF1) |
DL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
DL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
DL_TFC20 |
(TF2, TF1, TF0, TF1, TF1) |
DL_TFC21 |
(TF3, TF2, TF0, TF1, TF1) |
DL_TFC22 |
(TF4, TF3, TF0, TF1, TF1) |
DL_TFC23 |
(TF5, TF4, TF1, TF1, TF1) |
Sub-tests:
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs (note1) |
UL RLC SDU size (bits) (note2) |
Test data size (bits) (note2) |
---|---|---|---|---|---|---|
1 |
DL_TFC1, DL_TFC13 |
UL_TFC1, UL_TFC13 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC12, UL_TFC13 |
RB5: 39 RB6: 103 RB7: 60 RB8: 640 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
2 |
DL_TFC2, DL_TFC14 |
UL_TFC2, UL_TFC14 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC12, UL_TFC14 |
RB5: 42 RB6: 53 RB7: 60 RB8: 640 |
RB5: 42 RB6: 53 RB7: No data RB8: No data |
3 |
DL_TFC3, DL_TFC15 |
UL_TFC3, UL_TFC15 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC12, UL_TFC15 |
RB5: 55 RB6: 63 RB7: 60 RB8: 640 |
RB5: 55 RB6: 63 RB7: No data RB8: No data |
4 |
DL_TFC4, DL_TFC16 |
UL_TFC4, UL_TFC16 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC12, UL_TFC16 |
RB5: 75 RB6: 84 RB7: 60 RB8: 640 |
RB5: 75 RB6: 84 RB7: No data RB8: No data |
5 |
DL_TFC5, DL_TFC17 |
UL_TFC5, UL_TFC17 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC12, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 640 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
6 |
DL_TFC6, DL_TFC18 |
UL_TFC6, UL_TFC18 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC12, UL_TFC18 |
RB5:81 RB6:103 RB7: 60 RB8: 1280 |
RB5: No data RB6: No data RB7: No data RB8: 1280 |
7 |
DL_TFC7, DL_TFC19 |
UL_TFC7, UL_TFC19 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC7, UL_TFC12, UL_TFC13, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: 103 RB7: 60 RB8: 1280 |
RB5: 39 RB6: No data RB7: No data RB8: 1280 |
8 |
DL_TFC8, DL_TFC20 |
UL_TFC8, UL_TFC20 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC12, UL_TFC14, UL_TFC18, UL_TFC20 |
RB5: 42 RB6: 53 RB7: 60 RB8: 1280 |
RB5: 42 RB6: 53 RB7: No data RB8: 1280 |
9 |
DL_TFC9, DL_TFC21 |
UL_TFC9, UL_TFC21 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC9, UL_TFC12, UL_TFC15, UL_TFC18, UL_TFC21 |
RB5: 55 RB6: 63 RB7: 60 RB8: 1280 |
RB5: 55 RB6: 63 RB7: No data RB8: 1280 |
10 |
DL_TFC10, DL_TFC22 |
UL_TFC10, UL_TFC22 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC10, UL_TFC12, UL_TFC16, UL_TFC18, UL_TFC22 |
RB5: 75 RB6: 84 RB7: 60 RB8: 1280 |
RB5: 75 RB6: 84 RB7: No data RB8: 1280 |
11 |
DL_TFC11, DL_TFC23 |
UL_TFC11, UL_TFC23 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC11, UL_TFC12, UL_TFC17, UL_TFC18, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1280 |
RB5: 81 RB6: 103 RB7: 60 RB8: 1280 |
NOTE1: UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6 and UL_TFC12 are part of minimum set of TFCIs. NOTE2: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
14.2.49a.4 Test requirements
See 14.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2, 3, 4: RLC SDUs on RB5, RB6 having the same content as sent by SS; and no data shall be received on RB7 and RB8.
– for sub-test 5: RLC SDUs on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 6: RLC SDUs on RB8 having the same content as sent by SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 7: RLC SDUs on RB5 and RB8 having the same content as sent by SS; and no data shall be received on RB6, RB7.
– for sub-test 8, 9, 10: RLC SDUs on RB5, RB6 and RB8 having the same content as sent by SS; and no data shall be received on RB7.
– for sub-test 11: RLC SDUs on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.
14.2.49a.1 Conversational / speech / UL:(12.2 7.95 5.9 4.75) DL(12.2 7.95 5.9 4.75) kbps / CS RAB + Conversational / unknown / UL:64 DL:64 kbps / CS RAB+ UL:3.4 DL: 3.4 kbps SRBs for DCCH (40ms TTI)
14.2.49a.1.1 Conformance requirement
See 14.2.4.1.
14.2.49a.1.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.49a for 40 ms TTI case .
14.2.49a.1.3 Method of test
See 14.1.2 for test procedure.
Initial Conditions
The following RLC Info parameter values shall be set by the SS for the Conversational / unknown / UL:64 DL:64 kbps / CS RAB (RB8):
Uplink RLC |
|
TM RLC |
|
Segmentation indication |
FALSE |
Transmission RLC discard |
|
CHOICE SDU Discard Mode |
|
Timer based no explicit |
|
Timer_discard |
100ms |
Downlink RLC |
|
TM RLC |
|
Segmentation indication |
FALSE |
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
Uplink TFS:
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps) |
DCCH |
|
TFS |
TF0, bits |
0x81(alt. 1×0) |
0x103 |
0x60 |
0x640 |
0x148 |
TF1, bits |
1×39 |
1×53 |
1×60 |
4×640 |
1×148 |
|
TF2, bits |
1×42 |
1×63 |
N/A |
N/A |
N/A |
|
TF3, bits |
1×55 |
1×84 |
N/A |
N/A |
N/A |
|
TF4, bits |
1×75 |
1×103 |
N/A |
N/A |
N/A |
|
TF5, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Uplink TFCS:
TFCI |
(RB5, RB6, RB7, 64 kbps RAB, DCCH) |
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
UL_TFC2 |
(TF2, TF1, TF0, TF0, TF0) |
UL_TFC3 |
(TF3, TF2, TF0, TF0, TF0) |
UL_TFC4 |
(TF4, TF3, TF0, TF0, TF0) |
UL_TFC5 |
(TF5, TF4, TF1, TF0, TF0) |
UL_TFC6 |
(TF0, TF0, TF0, TF1, TF0) |
UL_TFC7 |
(TF1, TF0, TF0, TF1, TF0) |
UL_TFC8 |
(TF2, TF1, TF0, TF1, TF0) |
UL_TFC9 |
(TF3, TF2, TF0, TF1, TF0) |
UL_TFC10 |
(TF4, TF3, TF0, TF1, TF0) |
UL_TFC11 |
(TF5, TF4, TF1, TF1, TF0) |
UL_TFC12 |
(TF0, TF0, TF0, TF0, TF1) |
UL_TFC13 |
(TF1, TF0, TF0, TF0, TF1) |
UL_TFC14 |
(TF2, TF1, TF0, TF0, TF1) |
UL_TFC15 |
(TF3, TF2, TF0, TF0, TF1) |
UL_TFC16 |
(TF4, TF3, TF0, TF0, TF1) |
UL_TFC17 |
(TF5, TF4, TF1, TF0, TF1) |
UL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
UL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
UL_TFC20 |
(TF2, TF1, TF0, TF1, TF1) |
UL_TFC21 |
(TF3, TF2, TF0, TF1, TF1) |
UL_TFC22 |
(TF4, TF3, TF0, TF1, TF1) |
UL_TFC23 |
(TF5, TF4, TF1, TF1, TF1) |
Downlink TFS:
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (64 kbps) |
DCCH |
|
TFS |
TF0, bits |
0x81 (alt. 1×0) |
0x103 |
0x60 |
0x640 |
0x148 |
TF1, bits |
1×39 |
1×53 |
1×60 |
4×640 |
1×148 |
|
TF2, bits |
1×42 |
1×63 |
N/A |
N/A |
N/A |
|
TF3, bits |
1×55 |
1×84 |
N/A |
N/A |
N/A |
|
TF4, bits |
1×75 |
1×103 |
N/A |
N/A |
N/A |
|
TF5, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Downlink TFCS:
TFCI |
(RB2, RB3, RB4, 64 kbps RAB, DCCH) |
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
DL_TFC2 |
(TF2, TF1, TF0, TF0, TF0) |
DL_TFC3 |
(TF3, TF2, TF0, TF0, TF0) |
DL_TFC4 |
(TF4, TF3, TF0, TF0, TF0) |
DL_TFC5 |
(TF5, TF4, TF1, TF0, TF0) |
DL_TFC6 |
(TF0, TF0, TF0, TF1, TF0) |
DL_TFC7 |
(TF1, TF0, TF0, TF1, TF0) |
DL_TFC8 |
(TF2, TF1, TF0, TF1, TF0) |
DL_TFC9 |
(TF3, TF2, TF0, TF1, TF0) |
DL_TFC10 |
(TF4, TF3, TF0, TF1, TF0) |
DL_TFC11 |
(TF5, TF4, TF1, TF1, TF0) |
DL_TFC12 |
(TF0, TF0, TF0, TF0, TF1) |
DL_TFC13 |
(TF1, TF0, TF0, TF0, TF1) |
DL_TFC14 |
(TF2, TF1, TF0, TF0, TF1) |
DL_TFC15 |
(TF3, TF2, TF0, TF0, TF1) |
DL_TFC16 |
(TF4, TF3, TF0, TF0, TF1) |
DL_TFC17 |
(TF5, TF4, TF1, TF0, TF1) |
DL_TFC18 |
(TF0, TF0, TF0, TF1, TF1) |
DL_TFC19 |
(TF1, TF0, TF0, TF1, TF1) |
DL_TFC20 |
(TF2, TF1, TF0, TF1, TF1) |
DL_TFC21 |
(TF3, TF2, TF0, TF1, TF1) |
DL_TFC22 |
(TF4, TF3, TF0, TF1, TF1) |
DL_TFC23 |
(TF5, TF4, TF1, TF1, TF1) |
Sub-tests:
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs (note1) |
UL RLC SDU size (bits) (note2) |
Test data size (bits) (note2) |
---|---|---|---|---|---|---|
1 |
DL_TFC1, DL_TFC13 |
UL_TFC1, UL_TFC13 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC12, UL_TFC13 |
RB5: 39 RB6: 103 RB7: 60 RB8: 640 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
2 |
DL_TFC2, DL_TFC14 |
UL_TFC2, UL_TFC14 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC12, UL_TFC14 |
RB5: 42 RB6: 53 RB7: 60 RB8: 640 |
RB5: 42 RB6: 53 RB7: No data RB8: No data |
3 |
DL_TFC3, DL_TFC15 |
UL_TFC3, UL_TFC15 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC12, UL_TFC15 |
RB5: 55 RB6: 63 RB7: 60 RB8: 640 |
RB5: 55 RB6: 63 RB7: No data RB8: No data |
4 |
DL_TFC4, DL_TFC16 |
UL_TFC4, UL_TFC16 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC12, UL_TFC16 |
RB5: 75 RB6: 84 RB7: 60 RB8: 640 |
RB5: 75 RB6: 84 RB7: No data RB8: No data |
5 |
DL_TFC5, DL_TFC17 |
UL_TFC5, UL_TFC17 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC12, UL_TFC17 |
RB5: 81 RB6: 103 RB7: 60 RB8: 640 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
6 |
DL_TFC6, DL_TFC18 |
UL_TFC6, UL_TFC18 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC12, UL_TFC18 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2560 |
RB5: No data RB6: No data RB7: No data RB8: 2560 |
7 |
DL_TFC7, DL_TFC19 |
UL_TFC7, UL_TFC19 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC7, UL_TFC12, UL_TFC13, UL_TFC18, UL_TFC19 |
RB5: 39 RB6: 103 RB7: 60 RB8: 2560 |
RB5: 39 RB6: No data RB7: No data RB8: 2560 |
8 |
DL_TFC8, DL_TFC20 |
UL_TFC8, UL_TFC20 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC12, UL_TFC14, UL_TFC18, UL_TFC20 |
RB5: 42 RB6: 53 RB7: 60 RB8: 2560 |
RB5: 42 RB6: 53 RB7: No data RB8: 2560 |
9 |
DL_TFC9, DL_TFC21 |
UL_TFC9, UL_TFC21 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC9, UL_TFC12, UL_TFC15, UL_TFC18, UL_TFC21 |
RB5: 55 RB6: 63 RB7: 60 RB8: 2560 |
RB5: 55 RB6: 63 RB7: No data RB8: 2560 |
10 |
DL_TFC10, DL_TFC22 |
UL_TFC10, UL_TFC22 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC10, UL_TFC12, UL_TFC16, UL_TFC18, UL_TFC22 |
RB5: 75 RB6: 84 RB7: 60 RB8: 2560 |
RB5: 75 RB6: 84 RB7: No data RB8: 2560 |
11 |
DL_TFC11, DL_TFC23 |
UL_TFC11, UL_TFC23 |
DL_TFC0, DL_TFC12, UL_TFC0, UL_TFC12 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6, UL_TFC11, UL_TFC12, UL_TFC17, UL_TFC18, UL_TFC23 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2560 |
RB5: 81 RB6: 103 RB7: 60 RB8: 2560 |
NOTE1: UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC5, UL_TFC6 and UL_TFC12 are part of minimum set of TFCIs NOTE2: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
14.2.49a.1.4 Test requirements
See 14.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2, 3, 4: RLC SDUs on RB5, RB6 having the same content as sent by SS; and no data shall be received on RB7 and RB8.
– for sub-test 5: RLC SDUs on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 6: RLC SDUs on RB8 having the same content as sent by SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 7: RLC SDUs on RB5 and RB8 having the same content as sent by SS; and no data shall be received on RB6, RB7.
– for sub-test 8, 9, 10: RLC SDUs on RB5, RB6 and RB8 having the same content as sent by SS; and no data shall be received on RB7.
– for sub-test 11: RLC SDUs on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.