14.2.38b Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH.
34.123-13GPPPart 1: Protocol conformance specificationRelease 15TSUser Equipment (UE) conformance specification
14.2.38b.1 Conformance requirement
See 14.2.4.1.
14.2.38b.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.38b.
14.2.38b.3 Method of test
See 14.1.2 for test procedure.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (8 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
UL_TFC6 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC7 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC8 |
(TF2, TF1, TF1, TF0, TF1) |
|
UL_TFC9 |
(TF0, TF0, TF0, TF1, TF1) |
|
UL_TFC10 |
(TF1, TF0, TF0, TF1, TF1) |
|
UL_TFC11 |
(TF2, TF1, TF1, TF1, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (8 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
1×336 |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF1, TF0) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF1, TF0) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF1, TF0) |
|
DL_TFC6 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC7 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC8 |
(TF2, TF1, TF1, TF0, TF1) |
|
DL_TFC9 |
(TF0, TF0, TF0, TF1, TF1) |
|
DL_TFC10 |
(TF1, TF0, TF0, TF1, TF1) |
|
DL_TFC11 |
(TF2, TF1, TF1, TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs (note 1) |
UL RLC SDU size (bits) (note 2) |
Test data size (bits) (note 2) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1 DL_TFC7 |
UL_TFC1 UL_TFC7 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC6, UL_TFC7 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2 DL_TFC8 |
UL_TFC2 UL_TFC8 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC6, UL_TFC8 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
3 |
DL_TFC3 DL_TFC9 |
UL_TFC3 UL_TFC9 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC6, UL_TFC9 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: No data RB6: No data RB7: No data RB8: 312 |
|
4 |
DL_TFC4 DL_TFC10 |
UL_TFC4 UL_TFC10 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4, UL_TFC6, UL_TFC7, UL_TFC9, UL_TFC10 |
RB5: 39 RB6: 103 RB7: 60 RB8: 312 |
RB5: 39 RB6: No data RB7: No data RB8: 312 |
|
5 |
DL_TFC5 DL_TFC11 |
UL_TFC5 UL_TFC11 |
DL_TFC0, DL_TFC6, UL_TFC0, UL_TFC6 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC5, UL_TFC6, UL_TFC8, UL_TFC9, UL_TFC11 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
RB5: 81 RB6: 103 RB7: 60 RB8: 312 |
|
NOTE 1: UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 and UL_TFC6 are part of minimum set of TFCIs. NOTE 2: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. RB8: Test data size has been set to DL TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit). As the TTI for RB8 is the same for both downlink and uplink then UL RLC SDU size has been set to achieve UE to return one SDU per TTI, i.e. the UL RLC SDU size has been set equal to the uplink TFS size under test minus 8 bits (size of 7 bit length indicator and expansion bit). |
||||||
14.2.38b.4 Test requirements
See 14.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
- for sub-test 2: RLC SDUs on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
– for sub-test 3: RLC SDUs on RB8 having the same content as sent by SS; and no data shall be received on RB5, RB6 and RB7.
– for sub-test 4: RLC SDUs on RB5 and RB8 having the same content as sent by SS; and no data shall be received on RB6 and RB7.
- for sub-test 5: RLC SDUs on RB5, RB6, RB7 and RB8 having the same content as sent by SS.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.