14.2.38a Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:0 DL:0 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH.
34.123-13GPPPart 1: Protocol conformance specificationRelease 15TSUser Equipment (UE) conformance specification
14.2.38a.1 Conformance requirement
See 14.2.4.1.
14.2.38a.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.38a.
14.2.38a.3 Method of test
See 14.1.2 for test procedure. However, in this test the RM attribute values used shall be derived separately in the UL and DL as the mid-values of the RM attribute value ranges as specified by the reference radio bearer configuration.
Uplink TFS:
|
TFI |
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (0 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x81 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
N/A |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
UL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
UL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
UL_TFC3 |
(TF0, TF0, TF0, TF0, TF1) |
|
UL_TFC4 |
(TF1, TF0, TF0, TF0, TF1) |
|
UL_TFC5 |
(TF2, TF1, TF1, TF0, TF1) |
Downlink TFS:
|
RB5 (RAB subflow #1) |
RB6 (RAB subflow #2) |
RB7 (RAB subflow #3) |
RB8 (0 kbps) |
DCCH |
||
|
TFS |
TF0, bits |
1×0 |
0x103 |
0x60 |
0x336 |
0x148 |
|
TF1, bits |
1×39 |
1×103 |
1×60 |
N/A |
1×148 |
|
|
TF2, bits |
1×81 |
N/A |
N/A |
N/A |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, RB6, RB7, RB8, DCCH) |
|
DL_TFC0 |
(TF0, TF0, TF0, TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0, TF0, TF0, TF0) |
|
DL_TFC2 |
(TF2, TF1, TF1, TF0, TF0) |
|
DL_TFC3 |
(TF0, TF0, TF0, TF0, TF1) |
|
DL_TFC4 |
(TF1, TF0, TF0, TF0, TF1) |
|
DL_TFC5 |
(TF2, TF1, TF1, TF0, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under Test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs (note 1) |
UL RLC SDU size (bits) (note 2) |
Test data size (bits) (note 2) |
|---|---|---|---|---|---|---|
|
1 |
DL_TFC1 DL_TFC4 |
UL_TFC1 UL_TFC4 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3, |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC4 |
RB5: 39 RB6: 103 RB7: 60 RB8: 0 |
RB5: 39 RB6: No data RB7: No data RB8: No data |
|
2 |
DL_TFC2 DL_TFC5 |
UL_TFC2 UL_TFC5 |
DL_TFC0, DL_TFC3, UL_TFC0, UL_TFC3, |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC5 |
RB5: 81 RB6: 103 RB7: 60 RB8: 0 |
RB5: 81 RB6: 103 RB7: 60 RB8: No data |
|
NOTE 1: UL_TFC0, UL_TFC1, UL_TFC2 and UL_TFC3 are part of minimum set of TFCIs. NOTE 2: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
14.2.38a.4 Test requirements
See 14.1.2 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15a and step 15b the UE transmitted transport format shall be within the set of restricted TFCIs as specified for the actual sub-test.
3. At step 15a and step 15b the UE shall return
– for sub-test 1: RLC SDUs on RB5 having the same content as sent by SS; and no data shall be received on RB6, RB7 and RB8.
– for sub-test 2: RLC SDUs on RB5, RB6 and RB7 having the same content as sent by SS; and no data shall be received on RB8.
4. At step 15b the UE shall send at least one MEASUREMENT REPORT message.