14.2.23d Interactive or background / UL:32 DL:32 kbps / PS RAB (20 ms TTI) + UL:3.4 DL:3.4 kbps SRBs for DCCH.
34.123-13GPPPart 1: Protocol conformance specificationRelease 15TSUser Equipment (UE) conformance specification
14.2.23d.1 Conformance requirement
See 14.2.4.1.
14.2.23d.2 Test purpose
Test to verify establishment and data transfer of reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.23d.
14.2.23d.3 Method of test
Uplink TFS:
|
TFI |
RB5 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF2, TF0) |
|
UL_TFC3 |
(TF0, TF1) |
|
UL_TFC4 |
(TF1, TF1) |
|
UL_TFC5 |
(TF2, TF1) |
Downlink TFS:
|
TFI |
RB5 (32 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x336 |
0x148 |
|
TF1, bits |
1×336 |
1×148 |
|
|
TF2, bits |
2×336 |
N/A |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF2, TF0) |
|
DL_TFC3 |
(TF0, TF1) |
|
DL_TFC4 |
(TF1, TF1) |
|
DL_TFC5 |
(TF2, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs (note1) |
UL RLC SDU size (bits) (note2) |
Test data size (bits) (note2) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, UL_TFC0 DL_TFC3,UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC3, UL_TFC4 |
RB5: 312 |
RB5: 312 |
|
2 |
DL_TFC2 |
UL_TFC2 |
DL_TFC0, UL_TFC0 DL_TFC3 ,UL_TFC3 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3, UL_TFC5 |
RB5: 632 |
RB5: 632 |
|
NOTE1: UL_TFC0, UL_TFC1 and UL_TFC3 are part of minimum set of TFCIs. NOTE2: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. For RB5: Test data size has been set to the payload size of the DL TF under test minus 8 bits (size of 7 bit length indicator and expansion bit). The UL RLC SDU size has been set equal to the size of the payload size of the UL TF under test minus 8 bits (the size of 7 bit length indicator and expansion bit). |
||||||
See 14.1.1 for test procedure.
14.2.23d.4 Test requirements
See 14.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send a RADIO BEARER SETUP COMPLETE message.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (1×336).
– for sub-test 2: RB5/TF2 (2×336).
3. At step 15 the UE shall return
– for sub-test 1 to 2: an RLC SDU on RB5 having the same content as the DL RLC SDU sent by the SS.