14.2.13 Conversational / unknown / UL:64 DL:64 kbps / CS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH
34.123-13GPPPart 1: Protocol conformance specificationRelease 15TSUser Equipment (UE) conformance specification
14.2.13.1 Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 20 ms TTI
14.2.13.1.1 Conformance requirement
See clause 14.2.4.1.
14.2.13.1.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.13 for the 20 ms TTI case.
14.2.13.1.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS:
|
Uplink RLC |
|
|
TM RLC |
|
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Segmentation indication |
FALSE |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x148 |
|
TF1, bits |
2×640 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF0, TF1) |
|
UL_TFC3 |
(TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x148 |
|
TF1, bits |
2×640 |
1×148 |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF0, TF1) |
|
DL_TFC3 |
(TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 640 |
RB5: 2×640 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See clause 14.1.1 for test procedure.
14.2.13.1.4 Test requirements
See clause 14.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (2×640).
3. At step 15 the UE shall return
– for sub-test 1: two RLC SDUs on RB5 having the same content as sent by SS.
14.2.13.2 Conversational / unknown / UL:64 DL:64 kbps / CS RAB / 40 ms TTI
14.2.13.2.1 Conformance requirement
See clause 14.2.4.1.
14.2.13.2.2 Test purpose
To verify radio bearer establishment and correct data transfer for reference radio bearer configuration as specified in TS 34.108, clause 6.10.2.4.1.13 for the 40 ms TTI case.
14.2.13.2.3 Method of test
Initial Conditions
The following RLC Info parameter values shall be set by the SS:
|
Uplink RLC |
|
|
TM RLC |
|
|
Transmission RLC discard |
|
|
CHOICE SDU Discard Mode |
|
|
Timer based no explicit |
|
|
Timer_discard |
100ms |
|
Segmentation indication |
FALSE |
|
Downlink RLC |
|
|
TM RLC |
|
|
Segmentation indication |
FALSE |
|
NOTE: Timer based discard without explicit signalling is used in uplink to secure that the UE will be able to return data for the case when the UE test loop function will not deliver all the SDUs in one and the same TTI . |
|
Uplink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x148 |
|
TF1, bits |
4×640 |
1×148 |
Uplink TFCS:
|
TFCI |
(RB5, DCCH) |
|
UL_TFC0 |
(TF0, TF0) |
|
UL_TFC1 |
(TF1, TF0) |
|
UL_TFC2 |
(TF0, TF1) |
|
UL_TFC3 |
(TF1, TF1) |
Downlink TFS:
|
TFI |
RB5 (64 kbps) |
DCCH |
|
|
TFS |
TF0, bits |
0x640 |
0x148 |
|
TF1, bits |
4×640 |
1×148 |
Downlink TFCS:
|
TFCI |
(RB5, DCCH) |
|
DL_TFC0 |
(TF0, TF0) |
|
DL_TFC1 |
(TF1, TF0) |
|
DL_TFC2 |
(TF0, TF1) |
|
DL_TFC3 |
(TF1, TF1) |
Sub-tests:
|
Sub-test |
Downlink TFCS Under test |
Uplink TFCS Under test |
Implicitly tested |
Restricted UL TFCIs |
UL RLC SDU size (bits) (note) |
Test data size (bits) (note) |
|
1 |
DL_TFC1 |
UL_TFC1 |
DL_TFC0, DL_TFC2, UL_TFC0, UL_TFC2 |
UL_TFC0, UL_TFC1, UL_TFC2, UL_TFC3 |
RB5: 640 |
RB5: 4×640 |
|
NOTE: See TS 34.109 [10] clause 5.3.2.6.2 for details regarding loopback of RLC SDUs. |
||||||
See 14.1.1 for test procedure.
14.2.13.2.4 Test requirements
See 14.1.1 for definition of step 10 and step 15.
1. At step 10 the UE shall send RADIO BEARER SETUP COMPLETE.
2. At step 15 the UE transmitted transport format shall be
– for sub-test 1: RB5/TF1 (4×640).
3. At step 15 the UE shall return
– for sub-test 1: four RLC SDUs on RB5 having the same content as sent by SS.