9.2.2 Default Message Contents for RF (TDD)

34.1083GPPCommon test environments for User Equipment (UE)Conformance testingRelease 15TS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

Contents of Activate RB Test Mode message

Information Element	Value/remark
Protocol discriminator	F (Length 1/2)
Skip indicator	0 (Length 1/2)
Message Type	44h

Contents of Close UE Test Loop message

Information Element	Value/remark
Protocol discriminator	F (Length 1/2)
Skip indicator	0 (Length 1/2)
Message Type	40h
UE test loop mode	00h
UE test loop mode 1 LB setup	03h 00h F4h 0Ah

Contents of Open UE Test Loop message

Information Element	Value/remark
Protocol discriminator	F (Length 1/2)
Skip indicator	0 (Length 1/2)
Message Type	42h

Contents of PAGING TYPE 1 message: TM (CS)

Information Element	Value/remark
Message Type
Paging record list
-Paging record
– CHOICE Used paging identity	CN identity
– Paging cause	Terminating Streaming Call
– CN domain identity	CS domain
– CHOICE UE identity
– IMSI (GSM-MAP)	Set to the same octet string as in the IMSI stored in the USIM card
BCCH modification info	Not Present

Contents of PAGING TYPE 1 message: TM (PS)

Information Element	Value/remark
Message Type
Paging record list
-Paging record
– CHOICE Used paging identity	CN identity
– Paging cause	Terminating Interactive Call
– CN domain identity	PS domain
– CHOICE UE identity
– IMSI (GSM-MAP)	Set to the same octet string as in the IMSI stored in the USIM card
BCCH modification info	Not Present

Contents of RADIO BEARER SETUP message: AM or UM (3.84 Mcps TDD)

Information Element		Condition		Value/remark	Version		Index
Message Type		A1,A3					RBS3-001
RRC transaction identifier				Arbitrarily selects an integer between 0 and 3			RBS3-002
Integrity check info							RBS3-003
– message authentication code				SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC‑I.			RBS3-004
– RRC message sequence number				SS provides the value of this IE, from its internal counter.			RBS3-005
Integrity protection mode info				Not Present			RBS3-006
Ciphering mode info				Not Present			RBS3-007
Activation time				(256+CFN-(CFN MOD 8 + 8))MOD 256			RBS3-008
New U-RNTI				Not Present			RBS3-009
New C-RNTI				Not Present			RBS3-010
New DSCH-RNTI				Not Present	R99 and Rel-4 only		RBS3-011
New H-RNTI				Not Present	Rel-5		RBS3-012
RRC State indicator				CELL_DCH			RBS3-013
UTRAN DRX cycle length coefficient				Not Present			RBS3-014
CN information info				Not Present			RBS3-015
URA identity				Not Present			RBS3-016
– Signalling RB information to setup				Not Present			RBS3-017
– RAB information for setup list		A1					RBS3-018
– RAB information for setup							RBS3-019
– RAB info							RBS3-020
– RAB identity				0000 0001B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.			RBS3-021
– CN domain identity				CS domain			RBS3-022
– NAS Synchronization Indicator				Not Present			RBS3-023
– Re-establishment timer				UseT314			RBS3-024
– RB information to setup list							RBS3-025
– RB information to setup							RBS3-026
– RB identity				10			RBS3-027
– PDCP info				Not Present			RBS3-028
– CHOICE RLC info type				RLC info			RBS3-029
– CHOICE Uplink RLC mode				TM RLC			RBS3-030
– Transmission RLC discard				Not Present			RBS3-031
– Segmentation indication				FALSE			RBS3-032
– CHOICE Downlink RLC mode				TM RLC			RBS3-033
– Segmentation indication				FALSE			RBS3-034
– RB mapping info							RBS3-035
– Information for each multiplexing option							RBS3-036
– RLC logical channel mapping indicator				Not Present			RBS3-037
– Number of uplink RLC logical channels				1			RBS3-038
– Uplink transport channel type				DCH			RBS3-039
– UL Transport channel identity				1			RBS3-040
– Logical channel identity				Not Present			RBS3-041
– CHOICE RLC size list				Configured			RBS3-042
– MAC logical channel priority				7			RBS3-043
– Downlink RLC logical channel info							RBS3-044
– Number of downlink RLC logical channels				1			RBS3-045
– Downlink transport channel type				DCH			RBS3-046
– DL DCH Transport channel identity				6			RBS3-047
– DL DSCH Transport channel identity				Not Present			RBS3-048
– Logical channel identity				Not Present			RBS3-049
RAB information for setup list		A3					RBS3-050
– RAB information for setup							RBS3-051
– RAB info							RBS3-052
– RAB identity				0000 0101B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.			RBS3-053
– CN domain identity				PS domain			RBS3-054
– NAS Synchronization Indicator				Not Present			RBS3-055
– Re-establishment timer				UseT314			RBS3-056
– RB information to setup list							RBS3-057
– RB information to setup							RBS3-058
– RB identity				20			RBS3-059
– PDCP info				Not Present			RBS3-060
– CHOICE RLC info type				RLC info			RBS3-061
– CHOICE Uplink RLC mode				AM RLC			RBS3-062
– Transmission RLC discard							RBS3-063
– CHOICE SDU discard mode				No discard			RBS3-064
– MAX_DAT				15			RBS3-065
– Transmission window size				128			RBS3-066
– Timer_RST				500			RBS3-067
– Max_RST				4			RBS3-068
– Polling info							RBS3-069
– Timer_poll_prohibit				200			RBS3-070
– Timer_poll				200			RBS3-071
– Poll_SDU				1			RBS3-072
– Last transmission PDU poll				TRUE			RBS3-073
– Last retransmission PDU poll				TRUE			RBS3-074
– Poll_Windows				99			RBS3-075
– Timer_poll_periodic				Not Present			RBS3-076
– CHOICE Downlink RLC mode				AM RLC			RBS3-077
– In-sequence delivery				TRUE			RBS3-078
– Receiving window size				128			RBS3-079
– Downlink RLC status info							RBS3-080
– Timer_status_prohibit				200			RBS3-081
– Timer_EPC				200			RBS3-082
– Missing PDU indicator				TRUE			RBS3-083
– Timer_STATUS_periodic				Not Present			RBS3-084
– RB mapping info							RBS3-085
– Information for each multiplexing option				2RBMuxOptions			RBS3-086
– RLC logical channel mapping indicator				Not Present			RBS3-087
– Number of uplink RLC logical channels				1			RBS3-088
– Uplink transport channel type				DCH			RBS3-089
– UL Transport channel identity				1			RBS3-090
– Logical channel identity				Not Present			RBS3-091
– CHOICE RLC size list				Configured			RBS3-092
– MAC logical channel priority				8			RBS3-093
– Downlink RLC logical channel info							RBS3-094
– Number of downlink RLC logical channels				1			RBS3-095
– Downlink transport channel type				DCH			RBS3-096
– DL DCH Transport channel identity				6			RBS3-097
– DL DSCH Transport channel identity				Not Present			RBS3-098
– Logical channel identity				Not Present			RBS3-099
– RLC logical channel mapping indicator				Not Present			RBS3-100
– Number of uplink RLC logical channels				1			RBS3-101
– Uplink transport channel type				RACH			RBS3-102
– UL Transport channel identity				Not Present			RBS3-103
– Logical channel identity				7			RBS3-104
– CHOICE RLC size list				Explicit List			RBS3-105
– RLC size index				Reference to clause 6 Parameter Set			RBS3-106
– MAC logical channel priority				8			RBS3-107
– Downlink RLC logical channel info							RBS3-108
– Number of downlink RLC logical channels				1			RBS3-109
– Downlink transport channel type				FACH			RBS3-110
– DL DCH Transport channel identity				Not Present			RBS3-111
– DL DSCH Transport channel identity				Not Present			RBS3-112
– Logical channel identity				Not Present			RBS3-113
RB information to be affected list		A1,A3		Not Present			RBS3-114
Downlink counter synchronization info				Not Present			RBS3-115
UL Transport channel information for all transport channels		A1,A3					RBS3-116
– PRACH TFCS				Not Present			RBS3-117
– CHOICE mode				TDD			RBS3-118
-Individual UL CCTrCH information							RBS3-119
– TFCS ID				(This IE is repeated for TFC number.)			RBS3-120
– Allowed Transport Format combination				0 to MaxTFCvalue-1 (MaxTFCValue is refer to clause 6 Parameter Set.)			RBS3-121
– PRACH TFCS				(This IE is repeated for TFC number.)			RBS3-122
– CHOICE TFCI signalling				Normal			RBS3-123
– TFCI Field 1 information							RBS3-124
– TFCS complete reconfigure information							RBS3-125
– CHOICE TFCS Size				Number of used bits must be enough to cover all combinations of CTFC from clauses 6. Refer to clause 6 Parameter Set			RBS3-126
– CTFC information				Not Present			RBS3-127
– CHOICE mode				TDD			RBS3-128
– Individual UL CCTrCH information				Not Present			RBS3-129
Deleted UL TrCH information list				Not Present			RBS3-130
Added or Reconfigured UL TrCH information list		A1		1			RBS3-131
– Added or Reconfigured UL TrCH information							RBS3-132
– Uplink transport channel type				DCH			RBS3-133
– UL Transport channel identity				1			RBS3-134
– TFS							RBS3-135
– CHOICE Transport channel type				Dedicated transport channels			RBS3-136
– Dynamic Transport Format Information						RBS3-137
– RLC size			Reference to clause 6.10 Parameter Set			RBS3-138
– Number of TBs and TTI List			(This IE is repeated for TFI number.)			RBS3-139
– Transmission Time Interval			Not Present			RBS3-140
– Number of Transport blocks			Reference to clause 6.10 Parameter Set			RBS3-141
– Transmission Time Interval			Not Present			RBS3-142
– Number of Transport blocks			1			RBS3-143
– CHOICE Logical channel List			ALL			RBS3-144
– Semi-static Transport Format Information						RBS3-145
– Transmission time interval			Reference to clause 6.10 Parameter Set			RBS3-146
– Type of channel coding			Reference to clause 6.10 Parameter Set			RBS3-147
– Coding Rate			Reference to clause 6.10 Parameter Set			RBS3-148
– Rate matching attribute			Reference to clause 6.10 Parameter Set			RBS3-149
– CRC size			Reference to clause 6.10 Parameter Set			RBS3-150
CHOICE mode	A1, A3		TDD (no data)			RBS3-151
DL Transport channel information common for all transport channel		A1,A3					RBS3-152
– SCCPCH TFCS				Not Present			RBS3-153
– CHOICE mode				TDD			RBS3-154
– CHOICE DL parameters				Independent (Refer to clause 6)			RBS3-155
Deleted DL TrCH information list		A1,A3		Not Present			RBS3-156
Added or Reconfigured DL TrCH information list				1			RBS3-157
– Added or Reconfigured DL TrCH information							RBS3-158
– Downlink transport channel type				DCH			RBS3-159
– DL Transport channel identity				6			RBS3-160
– CHOICE DL parameters				Same as UL			RBS3-161
– Uplink transport channel type				DCH			RBS3-162
– UL TrCH identity				1			RBS3-163
– DCH quality target							RBS3-164
– BLER Quality value				Reference to clause 6			RBS3-165
Frequency info		A1,A3		Not Present			RBS3-166
Maximum allowed UL TX power				30dBm			RBS3-167
CHOICE channel requirement				Uplink DPCH info			RBS3-168
– Uplink DPCH power control info							RBS3-169
– CHOICE mode				TDD			RBS3-170
– UL Target SIR				Reference to clause 6 Parameter set.			RBS3-171
– CHOICE UL OL PC info				Individually signalled			RBS3-172
– CHOICE TDD option				3.84 Mcps			RBS3-173
– Individual timeslot interference info							RBS3-174
– Individual timeslot interference							RBS3-175
– DPCH Constant Value				Values are used for open loop power control, clause 8 in 3GPP TS 25.331 [34]			RBS3-176
– CHOICE mode				TDD			RBS3-177
– Uplink Timing Advance Control				Not Present			RBS3-178
– UL CCTrCH List							RBS3-179
– TFCS Id				1			RBS3-180
– Time info							RBS3-181
– Activation time				(256+CFN-(CFN MOD 8 + 8))MOD 256			RBS3-182
– Duration				Infinite			RBS3-183
– Common timeslot info							RBS3-184
– 2nd interleaving mode				Reference to clause 6.10 Parameter Set			RBS3-185
– TFCI coding				Reference to clause 6.10 Parameter Set			RBS3-186
– Puncturing Limit				Reference to clause 6.10 Parameter Set			RBS3-187
– Repetition Period				Reference to clause 6.10 Parameter Set			RBS3-188
– Repetition Length				Reference to clause 6.10 Parameter Set			RBS3-189
– First individual timeslot info							RBS3-190
– Timeslot number				The number of an uplink timeslot that has unassigned codes.			RBS3-191
– TFCI existence				TRUE			RBS3-192
– Midamble shift and burst type							RBS3-193
– CHOICE TDD option				3.84 Mcps			RBS3-194
-CHOICE Burst Type							RBS3-195
-Type 1							RBS3-196
-Midamble Allocation Mode				Default			RBS3-197
– Midamble configuration burst type 1 and 3				As defined in 3GPP TS 25.221 [28]			RBS3-198
– First timeslot channelisation codes				Repeated (1,2) for each channelisation code assigned in the slot to meet the needs of clause 6 Parameter Set.			RBS3-199
– Channelisation code				(i/SF) where i denotes an unassigned code matching the SF specified in clause 6 Parameter Set.			RBS3-200
– CHOICE more timeslots				The presence of this IE depends upon the number of resources specified in clause 6 and the number of slots in which they are being assigned.			RBS3-201
CHOICE Mode				TDD (no data)			RBS3-202
Downlink HS-PDSCH Information		A1,A3		Not Present	Rel-5		RBS3-203
Downlink information common for all radio links		A1,A3					RBS3-204
– Downlink DPCH info common for all RL							RBS3-205
– Timing indicator				Maintain			RBS3-206
– CFN-targetSFN frame offset				Not Present			RBS3-207
– Downlink DPCH power control information							RBS3-208
– CHOICE mode				TDD			RBS3-209
– DPC mode				0 (single)			RBS3-210
– CHOICE TDD mode				3.84 Mcps (no data)			RBS3-211
– Default DPCH Offset Value				Not Present			RBS3-212
Downlink information for per radio link list		A1,A3					RBS3-213
– Downlink information for each radio link							RBS3-214
– CHOICE mode				TDD			RBS3-215
– Primary CCPCH info							RBS3-216
– CHOICE SyncCase				Sync Case 1			RBS3-217
– Timeslot				PCCPCH timeslot			RBS3-218
– Cell parameters ID				0			RBS3-219
– SCTD indicator							RBS3-220
– Downlink DPCH info for each RL							RBS3-221
– CHOICE mode				TDD			RBS3-222
– DL CCTrCH List							RBS3-223
– TFCS ID				1			RBS3-224
– Time info							RBS3-225
– Activation time				(256+CFN-(CFN mod 8 + 8))mod 256			RBS3-226
– Duration				infinite			RBS3-227
– Common timeslot info							RBS3-228
– 2nd interleaving mode				Reference to the present document			RBS3-229
– TFCI coding				TRUE			RBS3-230
– Puncturing limit				Reference to clause 6 Parameter set			RBS3-231
– Repetition period				1			RBS3-232
– Repetition length				Empty			RBS3-233
– Downlink DPCH timeslots and codes							RBS3-234
– Individual timeslot info							RBS3-235
– Timeslot number				The number of a downlink timeslot that has unassigned codes.			RBS3-236
– TFCI existence				TRUE			RBS3-237
– Midamble shift and burst type							RBS3-238
– CHOICE TDD option				3.84 Mcps			RBS3-239
-CHOICE Burst Type							RBS3-240
-Type 1							RBS3-241
-Midamble Allocation Mode				Default			RBS3-242
– Midamble configuration burst type 1 and 3				As defined in 3GPP TS 25.221 [28]			RBS3-243
– First timeslot channelisation codes							RBS3-244
– First channelisation code				(i/SF) where i is the lowest numbered code that is being assigned and SF is specified in clause 6 Parameter Set..			RBS3-245
– Last channelisation code				(j/SF) where j is the highest numbered code that is being assigned in the slot.			RBS3-246
– Bitmap				Bitmap of the codes that are being assigned in the slot.			RBS3-247
– CHOICE more timeslots				The presence of this IE depends upon whether the requirements of clause 6 Parameter Set could be met by the codes that have been assigned in the first timeslot.			RBS3-248
– UL CCTrCH TPC List				Not Present			RBS3-249
-SCCPCH information for FACH				Not Present	R99 and Rel-4 only		RBS3-250

Condition	Explanation
A1	This IE is needed for transparent mode. In the case of TX and RX test cases, this IE is selected.
A3	This IE is needed for acknowledged mode.
NOTE: In the case of Performance Requirement and RRM test cases, A1 or A3 is selected according to the combination of UL and DL channels or test requirements.

Contents of RADIO BEARER SETUP message: AM or UM (1.28 Mcps TDD)

Information Element	Condition	Value/remark	Version	Index
Message Type	A1,A3			RBS1-001
RRC transaction identifier		Arbitrarily selects an integer between 0 and 3		RBS1-002
Integrity check info				RBS1-003
– message authentication code		SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.		RBS1-004
– RRC message sequence number		SS provides the value of this IE, from its internal counter.		RBS1-005
Integrity protection mode info		Not Present		RBS1-006
Ciphering mode info		Not Present		RBS1-007
Activation time		(256+CFN-(CFN MOD 8 + 8))MOD 256		RBS1-008
New U-RNTI		Not Present		RBS1-009
New C-RNTI		Not Present		RBS1-010
New DSCH-RNTI		Not Present	R99 and Rel-4 only	RBS1-011
New H-RNTI		Not Present	Rel-5	RBS1-012
New Primary E-RNTI		Not Present	Rel-6	RBS1-013
RRC State indicator		CELL_DCH		RBS1-014
UTRAN DRX cycle length coefficient		Not Present		RBS1-015
CN information info		Not Present		RBS1-016
URA identity		Not Present		RBS1-017
CHOICE specification mode		Complete specification		RBS1-018
– Signalling RB information to setup		Not Present		RBS1-019
– RAB information for setup list	A1			RBS1-020
– RAB information for setup				RBS1-021
– RAB info				RBS1-022
– RAB identity		0000 0001B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBS1-023
– CN domain identity		CS domain		RBS1-024
– NAS Synchronization Indicator		Not Present		RBS1-025
– Re-establishment timer		UseT314		RBS1-026
– RB information to setup list				RBS1-027
– RB information to setup				RBS1-028
– RB identity		10		RBS1-029
– PDCP info		Not Present		RBS1-030
– CHOICE RLC info type		RLC info		RBS1-031
– CHOICE Uplink RLC mode		TM RLC		RBS1-032
– Transmission RLC discard		Not Present		RBS1-033
– Segmentation indication		FALSE		RBS1-034
– CHOICE Downlink RLC mode		TM RLC		RBS1-035
– Segmentation indication		FALSE		RBS1-036
– One sided RLC re-establishment		FALSE	Rel-5	RBS1-037
– RB mapping info				RBS1-038
– Information for each multiplexing option				RBS1-039
– RLC logical channel mapping indicator		Not Present		RBS1-040
– Number of uplink RLC logical channels		1		RBS1-041
– Uplink transport channel type		DCH		RBS1-042
– UL Transport channel identity		1		RBS1-043
– Logical channel identity		Not Present		RBS1-044
– CHOICE RLC size list		Configured		RBS1-045
– MAC logical channel priority		7		RBS1-046
– Downlink RLC logical channel info				RBS1-047
– Number of downlink RLC logical channels		1		RBS1-048
– Downlink transport channel type		DCH		RBS1-049
– DL DCH Transport channel identity		6		RBS1-050
– DL DSCH Transport channel identity		Not Present		RBS1-051
– Logical channel identity		Not Present		RBS1-052
RAB information for setup list	A3			RBS1-053
– RAB information for setup				RBS1-054
– RAB info				RBS1-055
– RAB identity		0000 0101B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBS1-056
– CN domain identity		PS domain		RBS1-057
– NAS Synchronization Indicator		Not Present		RBS1-058
– Re-establishment timer		UseT315		RBS1-059
– RB information to setup list				RBS1-060
– RB information to setup				RBS1-061
– RB identity		20		RBS1-062
– PDCP info		Not Present		RBS1-063
– CHOICE RLC info type		RLC info		RBS1-064
– CHOICE Uplink RLC mode		AM RLC		RBS1-065
– Transmission RLC discard				RBS1-066
– CHOICE SDU discard mode		No discard		RBS1-067
– MAX_DAT		15		RBS1-068
– Transmission window size		128		RBS1-069
– Timer_RST		500		RBS1-070
– Max_RST		4		RBS1-071
– Polling info				RBS1-072
– Timer_poll_prohibit		200		RBS1-073
– Timer_poll		200		RBS1-074
– Poll_PDU		Not Present		RBS1-075
– Poll_SDU		1		RBS1-076
– Last transmission PDU poll		TRUE		RBS1-077
– Last retransmission PDU poll		TRUE		RBS1-078
– Poll_Windows		99		RBS1-079
– Timer_poll_periodic		Not Present		RBS1-080
– CHOICE Downlink RLC mode		AM RLC		RBS1-081
– DL RLC PDU size		Reference to clause 6 Parameter Set	Rel-5	RBS1-082
– In-sequence delivery		TRUE		RBS1-083
– Receiving window size		128		RBS1-084
– Downlink RLC status info				RBS1-085
– Timer_status_prohibit		200		RBS1-086
– Timer_EPC		200	R99 and Rel-4 only	RBS1-087
– Missing PDU indicator		TRUE		RBS1-088
– Timer_STATUS_periodic		Not Present		RBS1-089
– One sided RLC re-establishment		FALSE	Rel-5	RBS1-090
– RB mapping info				RBS1-091
– Information for each multiplexing option		2RBMuxOptions		RBS1-092
– RLC logical channel mapping indicator		Not Present		RBS1-093
– Number of uplink RLC logical channels		1		RBS1-094
– Uplink transport channel type		DCH		RBS1-095
– UL Transport channel identity		1		RBS1-096
– Logical channel identity		Not Present		RBS1-097
– CHOICE RLC size list		Configured		RBS1-098
– MAC logical channel priority		8		RBS1-099
– Downlink RLC logical channel info				RBS1-100
– Number of downlink RLC logical channels		1		RBS1-101
– Downlink transport channel type		DCH		RBS1-102
– DL DCH Transport channel identity		6		RBS1-103
– DL DSCH Transport channel identity		Not Present		RBS1-104
– Logical channel identity		Not Present		RBS1-105
– RLC logical channel mapping indicator		Not Present		RBS1-106
– Number of uplink RLC logical channels		1		RBS1-107
– Uplink transport channel type		RACH		RBS1-108
– UL Transport channel identity		Not Present		RBS1-109
– Logical channel identity		7		RBS1-110
– CHOICE RLC size list		Explicit List		RBS1-111
– RLC size index		Reference to clause 6 Parameter Set		RBS1-112
– MAC logical channel priority		8		RBS1-113
– Downlink RLC logical channel info				RBS1-114
– Number of downlink RLC logical channels		1		RBS1-115
– Downlink transport channel type		FACH		RBS1-116
– DL DCH Transport channel identity		Not Present		RBS1-117
– DL DSCH Transport channel identity		Not Present		RBS1-118
– Logical channel identity		7		RBS1-119
RAB information to reconfigure list		Not Present	Rel-6	RBS1-120
RB information to reconfigure list		Not Present	Rel-6	RBS1-121
RB information to be affected list	A1,A3	Not Present		RBS1-122
Downlink counter synchronization info		Not Present		RBS1-123
PDCP ROHC target mode		Not Present	Rel-5	RBS1-124
UL Transport channel information for all transport channels	A1,A3			RBS1-125
– PRACH TFCS		Not Present		RBS1-126
– CHOICE mode		TDD		RBS1-127
-Individual UL CCTrCH information				RBS1-128
– UL TFCS Identity				RBS1-129
– TFCS ID		1		RBS1-130
– Shared Channel Indicator		FALSE		RBS1-131
– CHOICE TFCI signalling		Normal		RBS1-134
– TFCI Field 1 information				RBS1-135
– CHOICE TFCS representation		Complete reconfiguration		RBS1-136
– TFCS complete reconfigure information				RBS1-137
– CHOICE TFCS Size		Number of used bits must be enough to cover all combinations of CTFC from clauses 6.		RBS1-138
– CTFC information		Refer to clause 6 Parameter Set		RBS1-139
– CHOICE Subset representation		Full (no data)		RBS1-142
– TFC subset list		Not Present		RBS1-143
Deleted UL TrCH information list	A1,A3	Not Present		RBS1-144
Added or Reconfigured UL TrCH information list	A1,A3	1		RBS1-145
– Added or Reconfigured UL TrCH information				RBS1-146
– Uplink transport channel type		DCH		RBS1-147
– UL Transport channel identity		1		RBS1-148
– TFS				RBS1-149
– CHOICE Transport channel type		Dedicated transport channels		RBS1-150
– Dynamic Transport Format Information				RBS1-151
– RLC size		Reference to clause 6 Parameter Set		RBS1-152
– Number of TBs and TTI List		(This IE is repeated for TFI number.)		RBS1-153
– Transmission Time Interval		Not Present		RBS1-154
– Number of Transport blocks		Reference to clause 6 Parameter Set		RBS1-155
– Transmission Time Interval		Not Present		RBS1-156
– Number of Transport blocks		1		RBS1-157
– CHOICE Logical channel List		ALL		RBS1-158
– Semi-static Transport Format Information				RBS1-159
– Transmission time interval		Reference to clause 6 Parameter Set		RBS1-160
– Type of channel coding		Reference to clause 6 Parameter Set		RBS1-161
– Coding Rate		Reference to clause 6 Parameter Set		RBS1-162
– Rate matching attribute		Reference to clause 6 Parameter Set		RBS1-163
– CRC size		Reference to clause 6 Parameter Set		RBS1-164
DL Transport channel information common for all transport channel	A1,A3			RBS1-166
– SCCPCH TFCS		Not Present		RBS1-167
– CHOICE mode		TDD		RBS1-168
– Individual DL CCTrCH information				RBS1-169
– DL TFCS Identity				RBS1-170
– TFCS ID		1		RBS1-171
– Shared Channel Indicator		FALSE		RBS1-172
– CHOICE DL parameters		Same as UL		RBS1-173
– UL DCH TFCS Identity				RBS1-174
– TFCS ID		1		RBS1-175
– Shared Channel Indicator		FALSE		RBS1-176
Deleted DL TrCH information list	A1,A3	Not Present		RBS1-177
Added or Reconfigured DL TrCH information list	A1,A3	1		RBS1-178
– Added or Reconfigured DL TrCH information				RBS1-179
– Downlink transport channel type		DCH		RBS1-180
– DL Transport channel identity		6		RBS1-181
– CHOICE DL parameters		Same as UL		RBS1-182
– Uplink transport channel type		DCH		RBS1-183
– UL TrCH identity		1		RBS1-184
– DCH quality target				RBS1-185
– BLER Quality value		Reference to clause 6		RBS1-186
Frequency info	A1,A3	Not Present		RBS1-187
Multi-frequency Info		Not Present	Rel-7	RBS1-188
DTX-DRX timing information		Not Present	Rel-7	RBS1-189
DTX-DRX Information		Not Present	Rel-7	RBS1-190
HS-SCCH less Information		Not Present	Rel-7	RBS1-191
MIMO parameters		Not Present	Rel-7	RBS1-192
Control Channel DRX information		Not Present	Rel-8	RBS1-193
SPS Information		Not Present	Rel-8	RBS1-194
Maximum allowed UL TX power		30dBm		RBS1-195
CHOICE channel requirement	A1,A3	Uplink DPCH info	Rel-5 and earlier	RBS1-196
Uplink DPCH info			Rel-6	RBS1-197
– Uplink DPCH power control info				RBS1-198
– CHOICE mode		TDD		RBS1-199
– PRXPDPCHdes		Reference to clause 6 Parameter set.		RBS1-200
– CHOICE UL OL PC info		Individually signalled		RBS1-201
– CHOICE TDD option		1.28 Mcps	Rel-4	RBS1-202
– TPC step size		0 (1 dB)		RBS1-203
– Primary CCPCH Tx Power		30 dBm		RBS1-204
– CHOICE mode		TDD		RBS1-205
– Uplink Timing Advance Control		Not Present		RBS1-206
– UL CCTrCH List				RBS1-207
– TFCS Id		1		RBS1-208
– PRXPDPCHdes		Reference to clause 6 Parameter set.		RBS1-209
– Time info				RBS1-210
– Activation time		(256+CFN-(CFN MOD 8 + 8))MOD 256		RBS1-211
– Duration		Infinite		RBS1-212
– Common timeslot info				RBS1-213
– 2nd interleaving mode		Reference to clause 6 Parameter Set		RBS1-214
– TFCI coding		Reference to clause 6 Parameter Set		RBS1-215
– Puncturing Limit		Reference to clause 6 Parameter Set		RBS1-216
– Repetition Period		Reference to clause 6 Parameter Set		RBS1-217
– Repetition Length		Reference to clause 6 Parameter Set		RBS1-218
– CHOICE TDD option		1.28 Mcps	Rel-4	RBS1-219
– Dynamic SF usage				RBS1-220
– First individual timeslot info				RBS1-221
– Timeslot number		The number of an uplink timeslot that has unassigned codes.		RBS1-222
– TFCI existence		TRUE		RBS1-223
– Midamble shift and burst type				RBS1-224
– CHOICE TDD option		1.28 Mcps	Rel-4	RBS1-225
– Midamble allocation mode		Default		RBS1-226
– Midamble configuration		8 (k=16)		RBS1-227
– CHOICE TDD option		1.28 Mcps	Rel-4	RBS1-228
– Modulation		QPSK		RBS1-229
– SS-TPC Symbols		1		RBS1-230
– CHOICE Mode		TDD		RBS1-231
– First timeslot channelisation codes		Repeated (1,2) for each channelisation code assigned in the slot to meet the needs of clause 6 Parameter Set.		RBS1-232
– Channelisation code		(i/SF) where i denotes an unassigned code matching the SF specified in clause 6 Parameter Set.		RBS1-233
– CHOICE more timeslots		The presence of this IE depends upon the number of resources specified in clause 6 and the number of slots in which they are being assigned.		RBS1-234
– UL CCTrCH List to Remove		Not Present		RBS1-236
E-DCH Info		Not Present	Rel-6	RBS1-237
Downlink HS-PDSCH Information	A1,A3	Not Present	Rel-5	RBS1-238
Downlink information common for all radio links	A1,A3			RBS1-239
– Downlink DPCH info common for all RL				RBS1-240
– Timing indicator		Maintain		RBS1-241
– CFN-targetSFN frame offset		Not Present		RBS1-242
– Downlink DPCH power control information				RBS1-243
– CHOICE mode		TDD		RBS1-244
– TPC step size		1 dB		RBS1-245
– CHOICE TDD mode		1.28 Mcps	Rel-4	RBS1-246
– TSTD indicator		FALSE		RBS1-247
– Default DPCH Offset Value		Not Present		RBS1-248
– MAC-hs reset indicator		Not Present	Rel-5	RBS1-249
– Post-verification period		Not Present	Rel-6	RBS1-250
Downlink information for per radio link list	A1,A3			RBS1-251
– Downlink information for each radio link				RBS1-252
– CHOICE mode		TDD		RBS1-253
– Primary CCPCH info				RBS1-254
– CHOICE TDD option		1.28 Mcps	Rel-4	RBS1-255
– TSTD indicator		FALSE		RBS1-256
– Cell parameters ID		0		RBS1-257
– SCTD indicator		FALSE		RBS1-258
– Cell ID		Not Present	Rel-4	RBS1-259
– CHOICE DPCH info		Downlink DPCH info for each RL	Rel-6	RBS1-260
– Downlink DPCH info for each RL				RBS1-261
– CHOICE mode		TDD		RBS1-262
– DL CCTrCH List				RBS1-263
– TFCS ID		1		RBS1-264
– Time info				RBS1-265
– Activation time		(256+CFN-(CFN mod 8 + 8))mod 256		RBS1-266
– Duration		Infinite		RBS1-267
– Common timeslot info				RBS1-268
– 2nd interleaving mode		Reference to the present document		RBS1-269
– TFCI coding		Reference to clause 6 Parameter set		RBS1-270
– Puncturing limit		Reference to clause 6 Parameter set		RBS1-271
– Repetition period		1		RBS1-272
– Repetition length		Empty		RBS1-273
– Downlink DPCH timeslots and codes				RBS1-274
– Individual timeslot info				RBS1-275
– Timeslot number		The number of a downlink timeslot that has unassigned codes.		RBS1-276
– TFCI existence		TRUE		RBS1-277
– Midamble shift and burst type				RBS1-278
– CHOICE TDD option		1.28 Mcps	Rel-4	RBS1-279
-Midamble Allocation Mode		Default		RBS1-280
– Midamble configuration		8 (k=16)		RBS1-281
– Modulation		QPSK		RBS1-282
– SS-TPC Symbols		1		RBS1-283
– First timeslot channelisation codes				RBS1-284
– First channelisation code		(i/SF) where i is the lowest numbered code that is being assigned and SF is specified in clause 6 Parameter Set.		RBS1-285
– Last channelisation code		(j/SF) where j is the highest numbered code that is being assigned in the slot.		RBS1-286
– Bitmap		Bitmap of the codes that are being assigned in the slot.		RBS1-287
– CHOICE more timeslots		The presence of this IE depends upon whether the requirements of clause 6 Parameter Set could be met by the codes that have been assigned in the first timeslot.		RBS1-288
– UL CCTrCH TPC List		Not Present		RBS1-289
-SCCPCH information for FACH		Not Present	R99 and Rel-4 only	RBS1-290
– E-AGCH Info		Not Present	Rel-6	RBS1-291
– CHOICE mode		TDD	Rel-7	RBS1-292
– CHOICE TDD option		1.28 Mcps		RBS1-293
– E-HICH Information		Not Present		RBS1-294
Downlink secondary cell info FDD		Not Present	Rel-8	RBS1-295
MBMS PL Service Restriction Information		Not Present	Rel-6	RBS1-296

Condition	Explanation
A1	This IE is needed for CS RAB
A3	This IE is needed for PS RAB.

Contents of RADIO BEARER SETUP message: AM or UM (7.68 Mcps TDD)

Information Element		Condition	Value/remark		Version	Index
Message Type		A1,A3				RBS3-001
RRC transaction identifier			Arbitrarily selects an integer between 0 and 3			RBS3-002
Integrity check info						RBS3-003
– message authentication code			SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC‑I.			RBS3-004
– RRC message sequence number			SS provides the value of this IE, from its internal counter.			RBS3-005
Integrity protection mode info			Not Present			RBS3-006
Ciphering mode info			Not Present			RBS3-007
Activation time			(256+CFN-(CFN MOD 8 + 8))MOD 256			RBS3-008
New U-RNTI			Not Present			RBS3-009
New C-RNTI			Not Present			RBS3-010
New DSCH-RNTI			Not Present		R99 and Rel-4 only	RBS3-011
New H-RNTI			Not Present		Rel-5	RBS3-012
CHOICE mode			TDD		Rel-7	RBS3-013
– New E-RNTI			Not Present		Rel-7	RBS3-014
RRC State indicator			CELL_DCH			RBS3-015
UTRAN DRX cycle length coefficient			Not Present			RBS3-016
CN information info			Not Present			RBS3-017
URA identity			Not Present			RBS3-018
– Signalling RB information to setup			Not Present			RBS3-019
– RAB information for setup list		A1				RBS3-020
– RAB information for setup						RBS3-021
– RAB info						RBS3-022
– RAB identity			0000 0001B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.			RBS3-023
– CN domain identity			CS domain			RBS3-024
– NAS Synchronization Indicator			Not Present			RBS3-025
– Re-establishment timer			UseT314			RBS3-026
– RB information to setup list						RBS3-027
– RB information to setup						RBS3-028
– RB identity			10			RBS3-029
– PDCP info			Not Present			RBS3-030
– CHOICE RLC info type			RLC info			RBS3-031
– CHOICE Uplink RLC mode			TM RLC			RBS3-032
– Transmission RLC discard			Not Present			RBS3-033
– Segmentation indication			FALSE			RBS3-034
– CHOICE Downlink RLC mode			TM RLC			RBS3-035
– Segmentation indication			FALSE			RBS3-036
– RB mapping info						RBS3-037
– Information for each multiplexing option						RBS3-038
– RLC logical channel mapping indicator			Not Present			RBS3-039
– Number of uplink RLC logical channels			1			RBS3-040
– Uplink transport channel type			DCH			RBS3-041
– UL Transport channel identity			1			RBS3-042
– Logical channel identity			Not Present			RBS3-043
– CHOICE RLC size list			Configured			RBS3-044
– MAC logical channel priority			7			RBS3-045
– Downlink RLC logical channel info						RBS3-046
– Number of downlink RLC logical channels			1			RBS3-047
– Downlink transport channel type			DCH			RBS3-048
– DL DCH Transport channel identity			6			RBS3-049
– DL DSCH Transport channel identity			Not Present			RBS3-050
– Logical channel identity			Not Present			RBS3-051
RAB information for setup list		A3				RBS3-052
– RAB information for setup						RBS3-053
– RAB info						RBS3-054
– RAB identity			0000 0101B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.			RBS3-055
– CN domain identity			PS domain			RBS3-056
– NAS Synchronization Indicator			Not Present			RBS3-057
– Re-establishment timer			UseT314			RBS3-058
– RB information to setup list						RBS3-059
– RB information to setup						RBS3-060
– RB identity			20			RBS3-061
– PDCP info			Not Present			RBS3-062
– CHOICE RLC info type			RLC info			RBS3-063
– CHOICE Uplink RLC mode			AM RLC			RBS3-064
– Transmission RLC discard						RBS3-065
– CHOICE SDU discard mode			No discard			RBS3-066
– MAX_DAT			15			RBS3-067
– Transmission window size			128			RBS3-068
– Timer_RST			500			RBS3-069
– Max_RST			4			RBS3-070
– Polling info						RBS3-071
– Timer_poll_prohibit			200			RBS3-072
– Timer_poll			200			RBS3-073
– Poll_SDU			1			RBS3-074
– Last transmission PDU poll			TRUE			RBS3-075
– Last retransmission PDU poll			TRUE			RBS3-076
– Poll_Windows			99			RBS3-077
– Timer_poll_periodic			Not Present			RBS3-078
– CHOICE Downlink RLC mode			AM RLC			RBS3-079
– In-sequence delivery			TRUE			RBS3-080
– Receiving window size			128			RBS3-081
– Downlink RLC status info						RBS3-082
– Timer_status_prohibit			200			RBS3-083
– Timer_EPC			200			RBS3-084
– Missing PDU indicator			TRUE			RBS3-085
– Timer_STATUS_periodic			Not Present			RBS3-086
– RB mapping info						RBS3-087
– Information for each multiplexing option			2RBMuxOptions			RBS3-088
– RLC logical channel mapping indicator			Not Present			RBS3-089
– Number of uplink RLC logical channels			1			RBS3-090
– Uplink transport channel type			DCH			RBS3-091
– UL Transport channel identity			1			RBS3-092
– Logical channel identity			Not Present			RBS3-093
– CHOICE RLC size list			Configured			RBS3-094
– MAC logical channel priority			8			RBS3-095
– Downlink RLC logical channel info						RBS3-096
– Number of downlink RLC logical channels			1			RBS3-097
– Downlink transport channel type			DCH			RBS3-098
– DL DCH Transport channel identity			6			RBS3-099
– DL DSCH Transport channel identity			Not Present			RBS3-100
– Logical channel identity			Not Present			RBS3-101
– RLC logical channel mapping indicator			Not Present			RBS3-102
– Number of uplink RLC logical channels			1			RBS3-103
– Uplink transport channel type			RACH			RBS3-104
– UL Transport channel identity			Not Present			RBS3-105
– Logical channel identity			7			RBS3-106
– CHOICE RLC size list			Explicit List			RBS3-107
– RLC size index			Reference to clause 6 Parameter Set			RBS3-108
– MAC logical channel priority			8			RBS3-109
– Downlink RLC logical channel info						RBS3-110
– Number of downlink RLC logical channels			1			RBS3-111
– Downlink transport channel type			FACH			RBS3-112
– DL DCH Transport channel identity			Not Present			RBS3-113
– DL DSCH Transport channel identity			Not Present			RBS3-114
– Logical channel identity			Not Present			RBS3-115
RB information to be affected list		A1,A3	Not Present			RBS3-116
Downlink counter synchronization info			Not Present			RBS3-117
UL Transport channel information for all transport channels		A1,A3				RBS3-118
– PRACH TFCS			Not Present			RBS3-119
– CHOICE mode			TDD			RBS3-120
-Individual UL CCTrCH information						RBS3-121
– TFCS ID			(This IE is repeated for TFC number.)			RBS3-122
– Allowed Transport Format combination			0 to MaxTFCvalue-1 (MaxTFCValue is refer to clause 6 Parameter Set.)			RBS3-123
– PRACH TFCS			(This IE is repeated for TFC number.)			RBS3-124
– CHOICE TFCI signalling			Normal			RBS3-125
– TFCI Field 1 information						RBS3-126
– TFCS complete reconfigure information						RBS3-127
– CHOICE TFCS Size			Number of used bits must be enough to cover all combinations of CTFC from clauses 6. Refer to clause 6 Parameter Set			RBS3-128
– CTFC information			Not Present			RBS3-129
– CHOICE mode			TDD			RBS3-130
– Individual UL CCTrCH information			Not Present			RBS3-131
Deleted UL TrCH information list			Not Present			RBS3-132
Added or Reconfigured UL TrCH information list		A1	1			RBS3-133
– Added or Reconfigured UL TrCH information						RBS3-134
– Uplink transport channel type			DCH			RBS3-135
– UL Transport channel identity			1			RBS3-136
– TFS						RBS3-137
– CHOICE Transport channel type			Dedicated transport channels			RBS3-138
– Dynamic Transport Format Information							RBS3-139
– RLC size				Reference to clause 6.10 Parameter Set			RBS3-140
– Number of TBs and TTI List				(This IE is repeated for TFI number.)			RBS3-141
– Transmission Time Interval				Not Present			RBS3-142
– Number of Transport blocks				Reference to clause 6.10 Parameter Set			RBS3-143
– Transmission Time Interval				Not Present			RBS3-144
– Number of Transport blocks				1			RBS3-145
– CHOICE Logical channel List				ALL			RBS3-146
– Semi-static Transport Format Information							RBS3-147
– Transmission time interval				Reference to clause 6.10 Parameter Set			RBS3-148
– Type of channel coding				Reference to clause 6.10 Parameter Set			RBS3-149
– Coding Rate				Reference to clause 6.10 Parameter Set			RBS3-150
– Rate matching attribute				Reference to clause 6.10 Parameter Set			RBS3-151
– CRC size				Reference to clause 6.10 Parameter Set			RBS3-152
CHOICE mode	A1, A3			TDD (no data)			RBS3-153
DL Transport channel information common for all transport channel		A1,A3				RBS3-154
– SCCPCH TFCS			Not Present			RBS3-155
– CHOICE mode			TDD			RBS3-156
– CHOICE DL parameters			Independent (Refer to clause 6)			RBS3-157
Deleted DL TrCH information list		A1,A3	Not Present			RBS3-158
Added or Reconfigured DL TrCH information list			1			RBS3-159
– Added or Reconfigured DL TrCH information						RBS3-160
– Downlink transport channel type			DCH			RBS3-161
– DL Transport channel identity			6			RBS3-162
– CHOICE DL parameters			Same as UL			RBS3-163
– Uplink transport channel type			DCH			RBS3-164
– UL TrCH identity			1			RBS3-165
– DCH quality target						RBS3-166
– BLER Quality value			Reference to clause 6			RBS3-167
Frequency info		A1,A3	Not Present			RBS3-168
DTX-DRX timing information			Not Present		Rel-7	RBS3-169
DTX-DRX information			Not Present		Rel-7	RBS3-170
HS-SCCH less information			Not Present		Rel-7	RBS3-171
MIMO parameters			Not Present		Rel-7	RBS3-172
Maximum allowed UL TX power			30dBm			RBS3-173
CHOICE channel requirement			Uplink DPCH info			RBS3-174
– Uplink DPCH power control info						RBS3-175
– CHOICE mode			TDD			RBS3-176
– UL Target SIR			Reference to clause 6 Parameter set.			RBS3-177
– CHOICE UL OL PC info			Individually signalled			RBS3-178
– CHOICE TDD option			7.68 Mcps			RBS3-179
– Individual timeslot interference info						RBS3-180
– Individual timeslot interference						RBS3-181
– DPCH Constant Value			Values are used for open loop power control, clause 8 in 3GPP TS 25.331 [34]			RBS3-182
– CHOICE mode			TDD			RBS3-183
– Uplink Timing Advance Control			Not Present			RBS3-184
– UL CCTrCH List						RBS3-185
– TFCS Id			1			RBS3-186
– Time info						RBS3-187
– Activation time			(256+CFN-(CFN MOD 8 + 8))MOD 256			RBS3-188
– Duration			Infinite			RBS3-189
– Common timeslot info						RBS3-190
– 2nd interleaving mode			Reference to clause 6.11 Parameter Set			RBS3-191
– TFCI coding			Reference to clause 6.11 Parameter Set			RBS3-192
– Puncturing Limit			Reference to clause 6.11 Parameter Set			RBS3-193
– Repetition Period			Reference to clause 6.11 Parameter Set			RBS3-194
– Repetition Length			Reference to clause 6.11 Parameter Set			RBS3-195
– CHOICE TDD option			7.68 Mcps TDD		Rel-7	RBS3-196
– Uplink DPCH timeslots and codes VHCR					Rel-7	RBS3-197
– Dynamic SF usage			TRUE			RBS3-198
– First individual timeslot info						RBS3-199
– Timeslot number			The number of an uplink timeslot that has unassigned codes.			RBS3-200
– TFCI existence			TRUE			RBS3-201
– Midamble shift and burst type						RBS3-202
– CHOICE TDD option			7.68 Mcps TDD		Rel-7	RBS3-203
-CHOICE Burst Type						RBS3-204
-Type 1						RBS3-205
-Midamble Allocation Mode			Default			RBS3-206
– Midamble configuration burst type 1 and 3			As defined in 3GPP TS 25.221 [28]			RBS3-207
– CHOICE TDD option			7.68 Mcps TDD		Rel-7	RBS3-208
– First timeslot code list			Repeated (1,2) for each channelisation code assigned in the slot to meet the needs of clause 6 Parameter Set.			RBS3-209
– Channelisation code			(i/SF) where i denotes an unassigned code matching the SF specified in clause 6 Parameter Set.			RBS3-210
– CHOICE more timeslots			The presence of this IE depends upon the number of resources specified in clause 6 and the number of slots in which they are being assigned.			RBS3-211
– UL CCTrCH List to Remove			Not Present			RBS3-212
CHOICE Mode			TDD (no data)			RBS3-213
Downlink HS-PDSCH Information		A1,A3	Not Present		Rel-5	RBS3-214
Downlink information common for all radio links		A1,A3				RBS3-215
– CHOICE DPCH info			Downlink DPCH info common for all RL		Rel-6	RBS3-216
– Timing indicator			Maintain			RBS3-217
– CFN-targetSFN frame offset			Not Present			RBS3-218
– Downlink DPCH power control information						RBS3-219
– CHOICE mode			TDD			RBS3-220
– TPC Step Size			1			RBS3-221
– MAC-d HFN initial value			Not Present			RBS3-222
– CHOICE mode			TDD			RBS3-223
– CHOICE mode			TDD			RBS3-224
– CHOICE TDD option			7.68 Mcps TDD		Rel-7	RBS3-225
– Default DPCH Offset Value			Not Present			RBS3-226
– Mac-hs reset indicator			Not Present			RBS3-227
Downlink information for per radio link list		A1,A3				RBS3-228
– Downlink information for each radio link						RBS3-229
– CHOICE mode			7.68 Mcps TDD		Rel-7	RBS3-230
– Primary CCPCH info						RBS3-231
– CHOICE SyncCase			Sync Case 1			RBS3-232
– Timeslot			PCCPCH timeslot			RBS3-233
– Cell parameters ID			0			RBS3-234
– SCTD indicator						RBS3-235
– CHOICE DPCH info			Downlink DPCH info for each RL		Rel-6	RBS3-236
– CHOICE mode			TDD			RBS3-237
– DL CCTrCH List						RBS3-238
– TFCS ID			1			RBS3-239
– Time info						RBS3-240
– Activation time			(256+CFN-(CFN mod 8 + 8))mod 256			RBS3-241
– Duration			infinite			RBS3-242
– Common timeslot info						RBS3-243
– 2nd interleaving mode			Reference to clause 6.11 Parameter Set			RBS3-244
– TFCI coding			Reference to clause 6.11 Parameter Set			RBS3-245
– Puncturing limit			Reference to clause 6.11 Parameter Set			RBS3-246
– Repetition period			Reference to clause 6.11 Parameter Set			RBS3-247
– Repetition length			Reference to clause 6.11 Parameter Set			RBS3-248
– Downlink DPCH timeslots and codes VHCR					Rel-7	RBS3-249
– Individual timeslot info						RBS3-250
– Timeslot number			The number of a downlink timeslot that has unassigned codes.			RBS3-251
– TFCI existence			TRUE			RBS3-252
– Midamble shift and burst type						RBS3-253
– CHOICE TDD option			7.68 Mcps TDD		Rel-7	RBS3-254
-CHOICE Burst Type						RBS3-255
-Type 1						RBS3-256
-Midamble Allocation Mode			Default			RBS3-257
– Midamble configuration burst type 1 and 3			As defined in 3GPP TS 25.221 [28]			RBS3-258
– CHOICE TDD option			7.68 Mcps		Rel-7	RBS3-259
– First timeslot channelisation codes VHCR					Rel-7	RBS3-260
– First channelisation code			(i/SF) where i is the lowest numbered code that is being assigned and SF is specified in clause 6 Parameter Set..			RBS3-261
– Last channelisation code			(j/SF) where j is the highest numbered code that is being assigned in the slot.			RBS3-262
– Bitmap			Bitmap of the codes that are being assigned in the slot.			RBS3-263
– CHOICE more timeslots			The presence of this IE depends upon whether the requirements of clause 6 Parameter Set could be met by the codes that have been assigned in the first timeslot.			RBS3-264
– UL CCTrCH TPC List			Not Present			RBS3-265
– DL CCTrCH List to Remove			Not Present			RBS3-266
-SCCPCH information for FACH			Not Present		R99 and Rel-4 only	RBS3-267
– E-AGCH Info			Not Present		Rel-6	RBS3-268
– CHOICE E-HICH Information			Not Present		Rel-6	RBS3-269
– CHOICE E-RGCH Information			Not Present		Rel-6	RBS3-270
MBMS PL Service Restriction Information			Not Present		Rel-5	RBS3-271

Condition	Explanation
A1	This IE is needed for transparent mode. In the case of TX and RX test cases, this IE is selected.

Contents of RADIO BEARER SETUP message: AM or UM (HSDPA)

Information Element	Value/remark	Version	Index
Message Type			RBSH-001
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3		RBSH-002
Integrity check info			RBSH-003
– message authentication code	SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.		RBSH-004
– RRC message sequence number	SS provides the value of this IE, from its internal counter.		RBSH-005
Integrity protection mode info	Not Present		RBSH-006
Ciphering mode info	Not Present		RBSH-007
Activation time	Not Present		RBSH-008
New U-RNTI	Not Present		RBSH-009
New C-RNTI	Not Present		RBSH-010
New H-RNTI	‘1010 1010 1010 1010’	Rel-5	RBSH-011
New Primary E-RNTI	Not Present	Rel-6	RBSH-012
New Secondary E-RNTI	Not Present	Rel-6	RBSH-013
RRC State indicator	CELL_DCH		RBSH-014
UTRAN DRX cycle length coefficient	Not Present		RBSH-015
CN information info	Not Present		RBSH-016
URA identity	Not Present		RBSH-017
CHOICE specification mode	Complete specification	Rel-6	RBSH-018
Signalling RB information to setup	Not Present		RBSH-019
RAB information for setup list			RBSH-020
– RAB information for setup			RBSH-021
– RAB info	(high-speed UM DTCH for PS domain)		RBSH-022
– RAB identity	0000 0110B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBSH-023
– CN domain identity	PS domain		RBSH-024
– NAS Synchronization Indicator	Not Present		RBSH-025
– Re-establishment timer	UseT315		RBSH-026
– RB information to setup			RBSH-027
– RB identity	25		RBSH-028
– PDCP info	Not Present		RBSH-029
– CHOICE RLC info type	RLC info		RBSH-030
– CHOICE Uplink RLC mode	Not Present		RBSH-031
– CHOICE Downlink RLC mode	UM RLC		RBSH-032
– DL UM RLC LI size	7	Rel-5	RBSH-033
– One sided RLC re-establishment	FALSE	Rel-5	RBSH-034
– RB mapping info			RBSH-035
– Information for each multiplexing option	1 RBMuxOptions		RBSH-036
– RLC logical channel mapping indicator	Not Present		RBSH-037
– Downlink RLC logical channel info			RBSH-038
– Number of downlink RLC logical channels	1		RBSH-039
– Downlink transport channel type	HS-DSCH		RBSH-040
– DL DCH Transport channel identity	Not Present		RBSH-041
– DL DSCH Transport channel identity	Not Present		RBSH-042
– DL HS-DSCH MAC-d flow identity	0		RBSH-043
– Logical channel identity	Not Present		RBSH-044
RB information to reconfigure list	Not Present	Rel-6	RBSH-045
RB information to be affected list	Not Present		RBSH-046
Downlink counter synchronization info	Not Present		RBSH-047
PDCP ROHC target mode	Not Present	Rel-5	RBSH-048
UL Transport channel information for all transport channels			RBSH-049
– PRACH TFCS	Not Present		RBSH-050
– CHOICE mode	TDD		RBSH-051
– Individual UL CCTrCH information			RBSH-052
– UL TFCS Identity			RBSH-053
– TFCS ID	1		RBSH-054
– Shared Channel Indicator	FALSE		RBSH-055
– UL TFCS			RBSH-056
– CHOICE TFCI signalling	Normal		RBSH-057
– TFCI Field 1 information			RBSH-058
– CHOICE TFCS representation	Complete reconfiguration		RBSH-059
– TFCS complete reconfigure information			RBSH-060
– CHOICE CTFC Size	2 bit CTFC		RBSH-061
– CTFC information	4 TFCs		RBSH-062
– CTFC	Reference to TS 34.122 clause C.2.1 Parameter Set		RBSH-063
– Power offset information			RBSH-064
– CHOICE Gain Factors	Computed Gain Factors(The last TFC is set to Signalled Gain Factors)		RBSH-065
– Reference TFC ID	0 Integer(0.. 3)		RBSH-066
– CHOICE Gain Factors	Signalled Gain Factors(Not Present if the CHOICE Gain Factors is set to ComputedGain Factors)		RBSH-067
– CHOICE mode	TDD		RBSH-068
– Gain factor βd	8 (Not Present if the CHOICE Gain Factors is set to Computed Gain Factors)		RBSH-069
– Reference TFC ID	0		RBSH-070
– CHOICE mode	TDD		RBSH-071
– TFC subset	Not Present		RBSH-072
– CHOICE Subset representation	Full transport format combination set		RBSH-073
– TFC subset list			RBSH-074
Deleted UL TrCH information list	Not Present		RBSH-075
Added or Reconfigured TrCH information list	Not Present		RBSH-076
CHOICE mode	Not Present		RBSH-077
DL Transport channel information common for all transport channel			RBSH-078
– SCCPCH TFCS	Not Present		RBSH-079
– CHOICE mode	TDD		RBSH-080
– Individual DL CCTrCH information	1 CCTrCh		RBSH-081
– DL TFCS identity	1		RBSH-082
– CHOICE DL parameters	Independent		RBSH-083
– DL TFCS			RBSH-084
– TFCI Field 1 Information			RBSH-085
– CHOICE TFCS representation	Complete reconfiguration		RBSH-086
– TFCS complete reconfigure			RBSH-087
– CHOICE CTFC Size	2 bit CTFC		RBSH-088
– CTFC information	4 TFCs		RBSH-089
– CTFC	Reference to TS 34.122 [5] Annex C.3.1 Parameter Set		RBSH-090
– Power offset information	Not Present		RBSH-091
Deleted DL TrCH information	Not Present		RBSH-092
Added or Reconfigured DL TrCH information list	1 TrCHs added		RBSH-093
– Added or Reconfigured DL TrCH information			RBSH-094
– Downlink transport channel type	HS-DSCH	Rel-5	RBSH-095
– DL Transport channel identity	Not Present		RBSH-096
– CHOICE DL parameters	HS-DSCH	Rel-5	RBSH-097
– HARQ Info		Rel-5	RBSH-098
– Number of Processes	Reference to TS34.122 [5] Annex C.4 Fixed Reference Channels	Rel-5	RBSH-099
– CHOICE Memory Partitioning	Explicit	Rel-5	RBSH-100
– Memory size	Reference to TS34.122 [5] Annex C.4 Fixed Reference Channels parameter “Number of HARQ Processes”.	Rel-5	RBSH-101
– Process Memory Size	Reference to TS34.122 [5] Annex C.4 Fixed Reference Channels parameter “Number of SML’s per HARQ Proc.”.	Rel-5	RBSH-102
– Added or reconfigured MAC-d flow		Rel-5	RBSH-103
– MAC-hs queue to add or reconfigure list	(one queue)	Rel-5	RBSH-104
– MAC-hs queue Id	0	Rel-5	RBSH-105
– MAC-d Flow Identity	0	Rel-5	RBSH-106
– T1	160	Rel-5	RBSH-107
– MAC-hs window size	16	Rel-5	RBSH-108
– MAC-d PDU size Info		Rel-5	RBSH-109
– MAC-d PDU size	Reference to TS34.122 [2] Annex C.4 Fixed Reference Channels	Rel-5	RBSH-110
– MAC-d PDU size index	0	Rel-5	RBSH-111
– MAC-hs queue to delete list	Not present	Rel-5	RBSH-112
– DCH quality target	Not present		RBSH-113
Frequency info	Not Present		RBSH-114
Maximum allowed UL TX power	30dBm		RBSH-115
CHOICE channel requirement	Uplink DPCH info		RBSH-116
Uplink DPCH info		Rel-6	RBSH-117
– Uplink DPCH power control info			RBSH-118
– CHOICE mode	TDD		RBSH-119
– UL target SIR	Not present		RBSH-120
– CHOICE UL OL PC info	Broadcast UL OL PC info		RBSH-121
– CHOICE mode	TDD		RBSH-122
– Uplink Timing Advance Control			RBSH-123
– CHOICE Timing Advance	Enabled		RBSH-124
– CHOICE TDD option	3.84 Mcps TDD		RBSH-125
– UL Timing Advance	Determined by observed timing deviation of the RACH at the node B		RBSH-126
– UL CCTrCH List	1 CCTrCh		RBSH-127
– TFCS Id	1		RBSH-128
– UL target SIR	+20dB		RBSH-129
– Activation time	Not present		RBSH-130
– Duration	Not present		RBSH-131
– Common timeslot info			RBSH-132
– 2nd interleaving mode	Reference to TS 34.122 clause C.2.1 Parameter Set		RBSH-133
– TFCI coding	Reference to TS 34.122 clause C.2.1 Parameter Set		RBSH-134
– Puncturing Limit	Reference to TS 34.122 clause C.2.1 Parameter Set		RBSH-135
– Repetition Period	1		RBSH-136
– Repetition Length	1		RBSH-137
– Uplink DPCH timeslots and codes			RBSH-138
– Dynamic SF usage	TRUE		RBSH-139
– Timeslot number	The number of an uplink timeslot that has unassigned codes.		RBSH-140
– TFCI existence	TRUE		RBSH-141
– Midamble shift and burst type			RBSH-142
– CHOICE TDD option	3.84 Mcps		RBSH-143
– CHOICE Burst Type	Reference to TS 34.122 clause C.2.1 Parameter Set		RBSH-144
– Midamble Allocation Mode	Default		RBSH-145
– Midamble configuration	Choose lowest possible Kcell value given burst type		RBSH-146
– CHOICE TDD option	3.84 Mcps TDD		RBSH-147
– First timeslot Code List	Repeated (1,2) for each channelisation code assigned in the slot to meet the needs of TS 34.122 clause C.2.1 Parameter Set.		RBSH-148
– Channelisation code	(i/SF) where i denotes an unassigned code matching the SF specified in TS 34.122 clause C.2.1 Parameter Set.		RBSH-149
– CHOICE more timeslots	The presence of this IE depends upon the number of resources specified in TS 34.122 clause C.2.1 Parameter Set and the number of slots in which they are being assigned.		RBSH-150
– UL CCTrCH List to Remove	Not present		RBSH-151
E-DCH Info	Not present	Rel-6	RBSH-152
Downlink HS-PDSCH Information		Rel-5	RBSH-153
– HS-SCCH Info		Rel-5	RBSH-154
– CHOICE mode	TDD	Rel-5	RBSH-155
– CHOICE TDD option	3.84 Mcps TDD	Rel-5	RBSH-156
– Ack-Nack Power Offset	0dB	Rel-5	RBSH-157
– HS-SICH Power Control Info		Rel-5	RBSH-158
– UL SIR target	0dB	Rel-5	RBSH-159
– HS-SICH Constant Value	-10dB	Rel-5	RBSH-160
– D_hs-sync	Not present	Rel-6	RBSH-161
– HS-SCCH Set Configuration	4	Rel-5	RBSH-162
– Timeslot number	The timeslot in which HS-SCCH is to be configured	Rel-5	RBSH-163
– Channelisation code	CC16/x where x is a previously unassigned channelisation code in this TS	Rel-5	RBSH-164
– Midamble Allocation mode	Default	Rel-5	RBSH-165
– Midamble configuration	8	Rel-5	RBSH-166
– BLER target	-2.4 (note that this equates to a BLER target of 0.4%, log10(0.004) = -2.4)	Rel-5	RBSH-167
– HS-SICH configuration			RBSH-168
– Timeslot number	The timeslot in which HS-SICH has been configured	Rel-5	RBSH-169
– Channelisation code	CC16/x where x is a previously unassigned channelisation code in this TS	Rel-5	RBSH-170
– Midamble Allocation mode	Default	Rel-5	RBSH-171
– Midamble configuration	8	Rel-5	RBSH-172
– Measurement Feedback Info		Rel-5	RBSH-173
– CHOICE mode	TDD	Rel-5	RBSH-174
– CHOICE TDD option	3.84 Mcps TDD	Rel-5	RBSH-175
– HS-PDSCH Timeslot Configuration		Rel-5	RBSH-176
– HS-PDSCH Timeslot Configuration List	Reference to TS 34.122 clause C.4.1 Parameter Set	Rel-5	RBSH-177
– Timeslot Number	The timeslot(s) in which HS-HS-DSCH is to configured	Rel-5	RBSH-178
– CHOICE Burst Type	Reference to TS 34.122 clause C.4.1 Parameter Set	Rel-5	RBSH-179
– Midamble Allocation Mode	Default	Rel-5	RBSH-180
– Midamble configuration burst type 1 and 3	8	Rel-5	RBSH-181
Downlink information common for all radio links	Not Present		RBSH-182
Downlink information per radio link list	1		RBSH-183
– Downlink information for each radio link			RBSH-184
– Choice mode	TDD		RBSH-185
– Primary CCPCH info			RBSH-186
– Choice mode	TDD		RBSH-187
– CHOICE TDD option	3.84 Mcps TDD		RBSH-188
– CHOICE SyncCase	Sync Case 1		RBSH-189
– Timeslot	Set to Timeslot containing PCCPCH		RBSH-190
– Cell parameters ID	10		RBSH-191
- SCTD indicator	FALSE		RBSH-192
– CHOICE DPCH info	Downlink DPCH info for each RL		RBSH-193
– CHOICE mode	TDD		RBSH-194
– DL CCTrCH List	1 CCTrCh		RBSH-195
– TFCS ID	1		RBSH-196
– Activation time	Not Present		RBSH-197
– Duration	Not Present		RBSH-198
– Common timeslot info			RBSH-199
– 2nd interleaving mode	Reference to TS 34.122 clause C.3.1 Parameter Set		RBSH-200
– TFCI coding	Reference to TS 34.122 clause C.3.1 Parameter Set		RBSH-201
– Puncturing Limit	Reference to TS 34.122 clause C.3.1 Parameter Set		RBSH-202
– Repetition Period	Reference to TS 34.122 clause C.3.1 Parameter Set		RBSH-203
– Repetition Length	Reference to TS 34.122 clause C.3.1 Parameter Set		RBSH-204
– Downlink DPCH timeslots and codes			RBSH-205
– Individual timeslot info			RBSH-206
– Timeslot number	The number of a downlink timeslot that has unassigned codes.		RBSH-207
– TFCI existence	TRUE		RBSH-208
– Midamble shift and burst type			RBSH-209
– CHOICE TDD option	3.84 Mcps		RBSH-210
– CHOICE Burst Type	Reference to TS 34.122 clause C.3.1 Parameter Set		RBSH-211
– Midamble Allocation Mode	Default		RBSH-212
– Midamble configuration	Set Kcell to lowest possible value given the number of codes defined in TS 34.122 clause C.3.1 Parameter Set		RBSH-213
– CHOICE TDD option	3.84 Mcps		RBSH-214
– First timeslot channelisation codes			RBSH-215
– CHOICE codes representation	Consecutive codes		RBSH-216
– First channelisation code	(i/SF) where i is the lowest numbered code that is being assigned and SF is specified in TS 34.122 clause C.3.1 Parameter Set.		RBSH-217
– Last channelisation code	(j/SF) where j is the highest numbered code that is being assigned in the slot as specified in TS 34.122 clause C.3.1 Parameter Set.		RBSH-218
– CHOICE more timeslots	The presence of this IE depends upon whether the requirements of TS 34.122 clause C.3.1 Parameter Set could be met by the codes that have been assigned in the first timeslot.		RBSH-219
– UL CCTrCH TPC List	No Present		RBSH-220
– DL CCTrCH List to Remove	Not Present		RBSH-221
– E-AGCH Info	Not Present	Rel-6	RBSH-222
– CHOICE E-HICH Information	Not Present	Rel-6	RBSH-223
– CHOICE E-RGCH Information	Not Present	Rel-6	RBSH-224
MBMS PL Service Restriction Information	Not Present	Rel-6	RBSH-225

Contents of RADIO BEARER SETUP message: AM or UM (HSDPA) (1.28 Mcps TDD)

Information Element	Value/remark	Version	Index
Message Type			RBSH-001
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3		RBSH-002
Integrity check info			RBSH-003
– message authentication code	SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.		RBSH-004
– RRC message sequence number	SS provides the value of this IE, from its internal counter.		RBSH-005
Integrity protection mode info	Not Present		RBSH-006
Ciphering mode info	Not Present		RBSH-007
Activation time	Not Present		RBSH-008
New U-RNTI	Not Present		RBSH-009
New C-RNTI	Not Present		RBSH-010
New H-RNTI	‘1010 1010 1010 1010’	Rel-5	RBSH-011
RRC State indicator	CELL_DCH		RBSH-012
UTRAN DRX cycle length coefficient	Not Present		RBSH-013
CN information info	Not Present		RBSH-014
URA identity	Not Present		RBSH-015
Signalling RB information to setup	Not Present		RBSH-016
RAB information for setup list			RBSH-017
– RAB information for setup			RBSH-018
– RAB info	(high-speed UM DTCH for PS domain)		RBSH-019
– RAB identity	0000 0110B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBSH-020
– CN domain identity	PS domain		RBSH-021
– NAS Synchronization Indicator	Not Present		RBSH-022
– Re-establishment timer	UseT315		RBSH-023
– RB information to setup			RBSH-024
– RB identity	25		RBSH-025
– PDCP info	Not Present		RBSH-026
– CHOICE RLC info type	RLC info		RBSH-027
– CHOICE Uplink RLC mode	Not Present		RBSH-028
– CHOICE Downlink RLC mode	UM RLC		RBSH-029
– DL UM RLC LI size	7	Rel-5	RBSH-030
– One sided RLC re-establishment	FALSE	Rel-5	RBSH-031
– RB mapping info			RBSH-032
– Information for each multiplexing option	1 RBMuxOptions		RBSH-033
– RLC logical channel mapping indicator	Not Present		RBSH-034
– Downlink RLC logical channel info			RBSH-035
– Number of downlink RLC logical channels	1		RBSH-036
– Downlink transport channel type	HS-DSCH		RBSH-037
– DL DCH Transport channel identity	Not Present		RBSH-038
– DL DSCH Transport channel identity	Not Present		RBSH-039
– DL HS-DSCH MAC-d flow identity	0		RBSH-040
– Logical channel identity	Not Present		RBSH-041
RB information to be affected list	Not Present		RBSH-042
Downlink counter synchronization info	Not Present		RBSH-043
PDCP ROHC target mode	Not Present	Rel-5	RBSH-044
UL Transport channel information for all transport channels			RBSH-045
– PRACH TFCS	Not Present		RBSH-046
– CHOICE mode	TDD		RBSH-047
– Individual UL CCTrCH information			RBSH-048
– UL TFCS Identity			RBSH-049
– TFCS ID	1		RBSH-050
– Shared Channel Indicator	FALSE		RBSH-051
– UL TFCS			RBSH-052
– CHOICE TFCI signalling	Normal		RBSH-053
– TFCI Field 1 Information			RBSH-054
– CHOICE TFCS representation	Complete reconfiguration		RBSH-055
– TFCS complete reconfiguration information			RBSH-056
– CHOICE CTFC Size	2 bit CTFC		RBSH-057
– CTFC information	4 TFCs		RBSH-058
– CTFC	Reference to clause TS 34.122 clause C.2.1 Parameter Set		RBSH-059
– Power offset information			RBSH-060
– CHOICE Gain Factors	Computed Gain Factors(The last TFC is set to Signalled Gain Factors)		RBSH-061
– Reference TFC ID	0 Integer(0.. 3)		RBSH-062
– CHOICE Gain Factors	Signalled Gain Factors(Not Present if the CHOICE Gain Factors is set to ComputedGain Factors)		RBSH-063
– CHOICE mode	TDD		RBSH-064
– Gain Factor d	15		RBSH-065
– Reference TFC ID	0 Integer(0.. 3)		RBSH-066
– CHOICE mode	TDD		RBSH-067
– TFC subset			RBSH-068
– CHOICE Subset representation	Full transport format combination set		RBSH-069
– TFC subset list	Not Present		RBSH-070
Deleted UL TrCH information list	Not Present		RBSH-071
Added or Reconfigured TrCH information list	Not Present		RBSH-072
CHOICE mode	Not Present		RBSH-073
DL Transport channel information common for all transport channel			RBSH-074
– SCCPCH TFCS	Not Present		RBSH-075
– CHOICE mode	TDD		RBSH-076
– Individual DL CCTrCH information			RBSH-077
– DL TFCS Identity			RBSH-078
– TFCS ID	2		RBSH-079
– Shared Channel Indicator	FALSE		RBSH-080
– CHOICE DL parameters	Explicit		RBSH-081
– DL DCH TFCS			RBSH-082
– CHOICE TFCI Signalling	Normal		RBSH-083
– TFCI Field 1 Information			RBSH-084
– CHOICE TFCS representation	Complete reconfiguration		RBSH-085
– TFCS complete reconfigure			RBSH-086
– CHOICE CTFC Size	2 bit CTFC		RBSH-087
– CTFC information	4 TFCs		RBSH-088
– CTFC	Reference to clause TS 34.122 clause C.2.1 Parameter Set		RBSH-089
– Power offset information	Not Present		RBSH-090
Deleted DL TrCH information	Not Present		RBSH-091
Added or Reconfigured DL TrCH information list	1 TrCHs added		RBSH-092
– Added or Reconfigured DL TrCH information	(HS-DSCH for DTCH)		RBSH-093
– Downlink transport channel type	HS-DSCH	Rel-5	RBSH-094
– DL Transport channel identity	Not Present		RBSH-095
– CHOICE DL parameters	HS-DSCH		RBSH-096
– HARQ Info		Rel-5	RBSH-097
– Number of Processes	Reference to TS34.122 [5] Annex C Fixed Reference Channels		RBSH-098
– CHOICE Memory Partitioning	Implicit		RBSH-099
– Added or reconfigured MAC-d flow			RBSH-100
– MAC-hs queue to add or reconfigure list	(one queue)	Rel-5	RBSH-101
– MAC-hs queue Id	0		RBSH-102
– MAC-d Flow Identity	0		RBSH-103
– T1	50		RBSH-104
– MAC-hs window size	16		RBSH-105
– MAC-d PDU size Info			RBSH-106
– MAC-d PDU size	Reference to TS34.122 [5] Annex C Fixed Reference Channels		RBSH-107
– MAC-d PDU size index	0		RBSH-108
– MAC-hs queue to delete list	Not present		RBSH-109
– DCH quality target	Not present		RBSH-110
Frequency info	Not Present		RBSH-111
Maximum allowed UL TX power	33dBm		RBSH-112
CHOICE channel requirement	Uplink DPCH info	Rel-5 and earlier	RBSH-113
– Uplink DPCH power control info			RBSH-114
– CHOICE mode	TDD		RBSH-115
– CHOICE TDD option	1.28 Mcps TDD		RBSH-116
– PRXPDPCHdes	Integer (-120…-58 by step of 1)		RBSH-117
– CHOICE UL OL PC info			RBSH-118
– Broadcast UL OL PC info	Null		RBSH-119
– Uplink Timing Advance Control	Not Present		RBSH-120
– UL CCTrCH List			RBSH-121
– TFCS ID	1		RBSH-122
– UL Target SIR	Real (-11 .. 20 by step of 0.5 dB) Reference to clause 6 Parameter set.		RBSH-123
– Time info			RBSH-124
– Activation time	(256+CFN-(CFN MOD 8 + 8))MOD 256		RBSH-125
– Duration	Infinite		RBSH-126
– Common timeslot info			RBSH-127
– 2nd interleaving mode	Default value is "Frame"		RBSH-128
– TFCI coding	Reference to clause 6 Parameter set		RBSH-129
– Puncturing limit	Reference to clause 6 Parameter set		RBSH-130
– Repetition period	1		RBSH-131
– Repetition length			RBSH-132
– Uplink DPCH timeslots and code			RBSH-133
– Dynamic SF usage	FALSE		RBSH-134
– First individual timeslot info			RBSH-135
– Timeslot number			RBSH-136
– CHOICE TDD option	1.28 Mcps TDD		RBSH-137
– Timeslot number	1 OR 2 OR 3		RBSH-138
– TFCI existence	TRUE		RBSH-139
– Midamble shift and burst type			RBSH-140
– CHOICE TDD option	1.28 Mcps TDD		RBSH-141
– Midamble allocation mode	Default midamble		RBSH-142
– Midamble configuration	16		RBSH-143
– Midamble Shift	Not Present		RBSH-144
– CHOICE TDD option	1.28 Mcps TDD		RBSH-145
– Modulation	QPSK		RBSH-146
– SS-TPC Symbols	1		RBSH-147
– Additional TPC-SS Symbols	Not present		RBSH-148
– First timeslot Code List	Repeated (1,2) for each channelisation code assigned in the slot to meet the needs of clause 6 Parameter Set.		RBSH-149
– channelisation codes	(SF/ i) where i denotes an unassigned code matching the SF specified in clause 6 Parameter Set.		RBSH-150
– CHOICE more timeslots	No more timeslots		RBSH-151
– UL CCTrCH List to Remove	Not present		RBSH-152
CHOICE Mode	TDD	R99 and Rel-4 only	RBSH-153
– Downlink PDSCH information	Not Present	R99 and Rel-4 only	RBSH-154
Downlink HS-PDSCH Information			RBSH-155
– HS-SCCH Info			RBSH-156
– CHOICE mode	TDD		RBSH-157
– CHOICE TDD option	1.28 Mcps		RBSH-158
– HS-SCCH Set Configuration			RBSH-159
– Timeslot number	0		RBSH-160
– First Channelisation code	(16/5)		RBSH-161
– Second Channelisation code	(16/6)		RBSH-162
– Midamble Allocation mode	Default midamble		RBSH-163
– Midamble configuration	8		RBSH-164
– BLER target	-2.0		RBSH-165
– HS-SICH configuration			RBSH-166
– Timeslot number	1		RBSH-167
– Channelisation code	(16/11)		RBSH-168
– Midamble Allocation mode	Default midamble		RBSH-169
– Midamble configuration	8		RBSH-170
– Ack-Nack Power Offset	0		RBSH-171
– PRXHS-SICH			RBSH-172
– TPC step size	1dB		RBSH-173
– Timeslot number	0		RBSH-174
– First Channelisation code	(16/7)		RBSH-175
– Second Channelisation code	(16/8)		RBSH-176
– Midamble Allocation mode	Default midamble		RBSH-177
– Midamble configuration	8		RBSH-178
– BLER target	-2.0		RBSH-179
– HS-SICH configuration			RBSH-180
– Timeslot number	1		RBSH-181
– Channelisation code	(16/12)		RBSH-182
– Midamble Allocation mode	Default midamble		RBSH-183
– Midamble configuration	8		RBSH-184
– Ack-Nack Power Offset	0		RBSH-185
– PRXHS-SICH			RBSH-186
– TPC step size	1dB		RBSH-187
– Timeslot number	0		RBSH-188
– First Channelisation code	(16/9)		RBSH-189
– Second Channelisation code	(16/10)		RBSH-190
– Midamble Allocation mode	Default midamble		RBSH-191
– Midamble configuration	8		RBSH-192
– BLER target	-2.0		RBSH-193
– HS-SICH configuration			RBSH-194
– Timeslot number	1		RBSH-195
– Channelisation code	(16/13)		RBSH-196
– Midamble Allocation mode	Default midamble		RBSH-197
– Midamble configuration	8		RBSH-198
– Ack-Nack Power Offset	0		RBSH-199
– PRXHS-SICH			RBSH-200
– TPC step size	1dB		RBSH-201
– Timeslot number	0		RBSH-202
– First Channelisation code	(16/11)		RBSH-203
– Second Channelisation code	(16/12)		RBSH-204
– Midamble Allocation mode	Default midamble		RBSH-205
– Midamble configuration	8		RBSH-206
– BLER target	-2.0		RBSH-207
– HS-SICH configuration			RBSH-208
– Timeslot number	1		RBSH-209
– Channelisation code	(16/14)		RBSH-210
– Midamble Allocation mode	Default midamble		RBSH-211
– Midamble configuration	8		RBSH-212
– Ack-Nack Power Offset	0		RBSH-213
– PRXHS-SICH			RBSH-214
– TPC step size	1dB		RBSH-215
Downlink information common for all radio links	Not Present		RBSH-216
Downlink information per radio link list			RBSH-217
– Downlink information for each radio link			RBSH-218
– CHOICE mode	TDD		RBSH-219
– Downlink information for each radio link			RBSH-220
– Choice mode	2 Integer(1.8)		RBSH-221
– Primary CCPCH info			RBSH-222
– Choice mode	Now		RBSH-223
– Choice TDD Option	Infinite		RBSH-224
– TSTD indicator			RBSH-225
– Cell parameters ID	Default value is "Frame"		RBSH-226
– SCTD indicator	Reference to clause 6 Parameter set		RBSH-227
– Downlink DPCH info for each RL	Reference to clause 6 Parameter set		RBSH-228
– CHOICE mode	1		RBSH-229
– DL CCTrCh List	NULL		RBSH-230
– TFCS ID			RBSH-231
– Time info			RBSH-232
– Activation time			RBSH-233
– Duration	1.28 Mcps TDD		RBSH-234
– Common timeslot info	4 OR 5 OR 6		RBSH-235
– 2nd interleaving mode	TRUE		RBSH-236
– TFCI coding			RBSH-237
– Puncturing limit	1.28 Mcps TDD		RBSH-238
– Repetition period	Default midamble		RBSH-239
– Repetition length	16		RBSH-240
– Downlink DPCH timeslots and codes	Not Present		RBSH-241
– First individual timeslot info	1.28 Mcps TDD		RBSH-242
– Timeslot number	QPSK		RBSH-243
– CHOICE TDD option	1		RBSH-244
– Timeslot number	Not present		RBSH-245
– TFCI existence	Repeated (1,2) for each channelisation code assigned in the slot to meet the needs of clause 6 Parameter Set.		RBSH-246
– Midamble shift and burst type			RBSH-247
– CHOICE TDD option	Reference to clause 6.11 Parameter Set		RBSH-248
– Midamble allocation mode	No more timeslots		RBSH-249
– Midamble configuration	This list is not required for 1.28 Mcps TDD and is to be ignored by the UE.		RBSH-250
– Midamble Shift			RBSH-251
– CHOICE TDD option	1		RBSH-252
– Modulation	FALSE		RBSH-253
– SS-TPC Symbols	Not present		RBSH-254
– Additional TPC-SS Symbols	Not Present		RBSH-255
– First timeslot channelisation codes	TDD		RBSH-256
– CHOICE codes representation			RBSH-257
– Channelisation codes bitmap	2 Integer(1.8)		RBSH-258
– CHOICE more timeslots			RBSH-259
– UL CCTrCH TPC List	Now		RBSH-260
– UL TPC TFCS Identity	Infinite		RBSH-261
– TFCS ID			RBSH-262
– Shared Channel Indicator	Default value is "Frame"		RBSH-263
– DL CCTrCH List to Remove	Reference to clause 6 Parameter set		RBSH-264
– SCCPCH Information for FACH	Reference to clause 6 Parameter set	R99 and Rel-4 only	RBSH-265

Contents of RADIO BEARER SETUP message: AM or UM (HSDPA) (7.68 Mcps TDD)

Information Element	Value/remark	Version	Index
Message Type			RBS7-001
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3		RBS7-002
Integrity check info			RBS7-003
– message authentication code	SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.		RBS7-004
– RRC message sequence number	SS provides the value of this IE, from its internal counter.		RBS7-005
Integrity protection mode info	Not Present		RBS7-006
Ciphering mode info	Not Present		RBS7-007
Activation time	Not Present		RBS7-008
New U-RNTI	Not Present		RBS7-009
New C-RNTI	Not Present		RBS7-010
New H-RNTI	‘1010 1010 1010 1010’	Rel-5	RBS7-011
CHOICE mode	TDD	Rel-7	RBS7-012
New E-RNTI	Not Present	Rel-7	RBS7-013
RRC State indicator	CELL_DCH		RBS7-014
UTRAN DRX cycle length coefficient	Not Present		RBS7-015
CN information info	Not Present		RBS7-016
URA identity	Not Present		RBS7-017
CHOICE specification mode	Complete specification	Rel-6	RBS7-018
Signalling RB information to setup	Not Present		RBS7-019
RAB information for setup list			RBS7-020
– RAB information for setup			RBS7-021
– RAB info	(high-speed UM DTCH for PS domain)		RBS7-022
– RAB identity	0000 0110B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBS7-023
– CN domain identity	PS domain		RBS7-024
– NAS Synchronization Indicator	Not Present		RBS7-025
– Re-establishment timer	UseT315		RBS7-026
– RB information to setup			RBS7-027
– RB identity	25		RBS7-028
– PDCP info	Not Present		RBS7-029
– CHOICE RLC info type	RLC info		RBS7-030
– CHOICE Uplink RLC mode	Not Present		RBS7-031
– CHOICE Downlink RLC mode	UM RLC		RBS7-032
– DL UM RLC LI size	7	Rel-5	RBS7-033
– One sided RLC re-establishment	FALSE	Rel-5	RBS7-034
– RB mapping info			RBS7-035
– Information for each multiplexing option	1 RBMuxOptions		RBS7-036
– RLC logical channel mapping indicator	Not Present		RBS7-037
– Downlink RLC logical channel info			RBS7-038
– Number of downlink RLC logical channels	1		RBS7-039
– Downlink transport channel type	HS-DSCH		RBS7-040
– DL DCH Transport channel identity	Not Present		RBS7-041
– DL DSCH Transport channel identity	Not Present		RBS7-042
– DL HS-DSCH MAC-d flow identity	0		RBS7-043
– Logical channel identity	Not Present		RBS7-044
RB information to reconfigure list	Not Present	Rel-6	RBS7-045
RB information to be affected list	Not Present		RBS7-046
Downlink counter synchronization info	Not Present		RBS7-047
PDCP ROHC target mode	Not Present	Rel-5	RBS7-048
UL Transport channel information for all transport channels			RBS7-049
– PRACH TFCS	Not Present		RBS7-050
– CHOICE mode	TDD		RBS7-051
– Individual UL CCTrCH information			RBS7-052
– UL TFCS Identity			RBS7-053
– TFCS ID	1		RBS7-054
– Shared Channel Indicator	FALSE		RBS7-055
– UL TFCS			RBS7-056
– CHOICE TFCI signalling	Normal		RBS7-057
– TFCI Field 1 information			RBS7-058
– CHOICE TFCS representation	Complete reconfiguration		RBS7-059
– TFCS complete reconfigure information			RBS7-060
– CHOICE CTFC Size	2 bit CTFC		RBS7-061
– CTFC information	4 TFCs		RBS7-062
– CTFC	Reference to TS 34.122 clause C.2.1 Parameter Set		RBS7-063
– Power offset information			RBS7-064
– CHOICE Gain Factors	Computed Gain Factors(The last TFC is set to Signalled Gain Factors)		RBS7-065
– Reference TFC ID	0 Integer(0.. 3)		RBS7-066
– CHOICE Gain Factors	Signalled Gain Factors(Not Present if the CHOICE Gain Factors is set to ComputedGain Factors)		RBS7-067
– CHOICE mode	TDD		RBS7-068
– Gain factor βd	8 (Not Present if the CHOICE Gain Factors is set to Computed Gain Factors)		RBS7-069
– Reference TFC ID	0		RBS7-070
– CHOICE mode	TDD		RBS7-071
– TFC subset	Not Present		RBS7-072
– CHOICE Subset representation	Full transport format combination set		RBS7-073
– TFC subset list			RBS7-074
Deleted UL TrCH information list	Not Present		RBS7-075
Added or Reconfigured TrCH information list	Not Present		RBS7-076
CHOICE mode	Not Present		RBS7-077
DL Transport channel information common for all transport channel			RBS7-078
– SCCPCH TFCS	Not Present		RBS7-079
– CHOICE mode	TDD		RBS7-080
– Individual DL CCTrCH information	1 CCTrCh		RBS7-081
– DL TFCS identity	1		RBS7-082
– CHOICE DL parameters	Independent		RBS7-083
– DL TFCS			RBS7-084
– TFCI Field 1 Information			RBS7-085
– CHOICE TFCS representation	Complete reconfiguration		RBS7-086
– TFCS complete reconfigure			RBS7-087
– CHOICE CTFC Size	2 bit CTFC		RBS7-088
– CTFC information	4 TFCs		RBS7-089
– CTFC	Reference to TS 34.122 [5] Annex C.3.1 Parameter Set		RBS7-090
– Power offset information	Not Present		RBS7-091
Deleted DL TrCH information	Not Present		RBS7-092
Added or Reconfigured DL TrCH information list	1 TrCHs added		RBS7-093
– Added or Reconfigured DL TrCH information			RBS7-094
– Downlink transport channel type	HS-DSCH	Rel-5	RBS7-095
– DL Transport channel identity	Not Present		RBS7-096
– CHOICE DL parameters	HS-DSCH	Rel-5	RBS7-097
– HARQ Info		Rel-5	RBS7-098
– Number of Processes	Reference to TS34.122 [5] Annex C.4 Fixed Reference Channels	Rel-5	RBS7-099
– CHOICE Memory Partitioning	Explicit	Rel-5	RBS7-100
– Memory size	Reference to TS34.122 [5] Annex C.4 Fixed Reference Channels parameter “Number of HARQ Processes”.	Rel-5	RBS7-101
– Process Memory Size	Reference to TS34.122 [5] Annex C.4 Fixed Reference Channels parameter “Number of SML’s per HARQ Proc.”.	Rel-5	RBS7-102
– Added or reconfigured MAC-d flow		Rel-5	RBS7-103
– MAC-hs queue to add or reconfigure list	(one queue)	Rel-5	RBS7-104
– MAC-hs queue Id	0	Rel-5	RBS7-105
– MAC-d Flow Identity	0	Rel-5	RBS7-106
– T1	160	Rel-5	RBS7-107
– MAC-hs window size	16	Rel-5	RBS7-108
– MAC-d PDU size Info		Rel-5	RBS7-109
– MAC-d PDU size	Reference to TS34.122 [2] Annex C.4 Fixed Reference Channels	Rel-5	RBS7-110
– MAC-d PDU size index	0	Rel-5	RBS7-111
– MAC-hs queue to delete list	Not present	Rel-5	RBS7-112
– DCH quality target	Not present		RBS7-113
Frequency info	Not Present		RBS7-114
DTX-DRX timing information	Not Present	Rel-7	RBS7-115
DTX-DRX information	Not Present	Rel-7	RBS7-116
HS-SCCH less information	Not Present	Rel-7	RBS7-117
MIMO parameters	Not Present	Rel-7	RBS7-118
Maximum allowed UL TX power	30dBm		RBS7-119
CHOICE channel requirement	Uplink DPCH info		RBS7-120
Uplink DPCH info		Rel-6	RBS7-121
– Uplink DPCH power control info			RBS7-122
– CHOICE mode	TDD		RBS7-123
– UL target SIR	Not present		RBS7-124
– CHOICE UL OL PC info	Broadcast UL OL PC info		RBS7-125
– CHOICE mode	TDD		RBS7-126
– Uplink Timing Advance Control			RBS7-127
– CHOICE Timing Advance	Enabled		RBS7-128
– CHOICE TDD option	7.68 Mcps TDD	Rel-7	RBS7-129
– UL Timing Advance	Determined by observed timing deviation of the RACH at the node B		RBS7-130
– UL CCTrCH List	1 CCTrCh		RBS7-131
– TFCS Id	1		RBS7-132
– UL target SIR	+20dB		RBS7-133
– Activation time	Not present		RBS7-134
– Duration	Not present		RBS7-135
– Common timeslot info			RBS7-136
– 2nd interleaving mode	Reference to TS 34.122 clause C.2.1 Parameter Set		RBS7-137
– TFCI coding	Reference to TS 34.122 clause C.2.1 Parameter Set		RBS7-138
– Puncturing Limit	Reference to TS 34.122 clause C.2.1 Parameter Set		RBS7-139
– Repetition Period	1		RBS7-140
– Repetition Length	1		RBS7-141
– CHOICE mode	7.68 Mcps TDD	Rel-7	RBS7-142
– Uplink DPCH timeslots and codes VHCR		Rel-7	RBS7-143
– Dynamic SF usage	TRUE		RBS7-144
– Timeslot number	The number of an uplink timeslot that has unassigned codes.		RBS7-145
– TFCI existence	TRUE		RBS7-146
– Midamble shift and burst type			RBS7-147
– CHOICE TDD option	7.68 Mcps TDD	Rel-7	RBS7-148
– CHOICE Burst Type	Reference to TS 34.122 clause C.2.1 Parameter Set		RBS7-149
– Midamble Allocation Mode	Default		RBS7-150
– Midamble configuration	Choose lowest possible Kcell value given burst type		RBS7-151
– CHOICE TDD option	7.68 Mcps TDD	Rel-7	RBS7-152
– First timeslot Code List	Repeated (1,2) for each channelisation code assigned in the slot to meet the needs of TS 34.122 clause C.2.1 Parameter Set.		RBS7-153
– Channelisation code	(i/SF) where i denotes an unassigned code matching the SF specified in TS 34.122 clause C.2.1 Parameter Set.		RBS7-154
– CHOICE more timeslots	The presence of this IE depends upon the number of resources specified in TS 34.122 clause C.2.1 Parameter Set and the number of slots in which they are being assigned.		RBS7-155
– UL CCTrCH List to Remove	Not present		RBS7-156
E-DCH Info	Not present	Rel-6	RBS7-157
Downlink HS-PDSCH Information		Rel-5	RBS7-158
– HS-SCCH Info		Rel-5	RBS7-159
– CHOICE mode	TDD	Rel-5	RBS7-160
– CHOICE TDD option	7.68 Mcps TDD	Rel-7	RBS7-161
– Ack-Nack Power Offset	0dB	Rel-5	RBS7-162
– HS-SICH Power Control Info		Rel-5	RBS7-163
– UL SIR target	0dB	Rel-5	RBS7-164
– HS-SICH Constant Value	-10dB	Rel-5	RBS7-165
– D_hs-sync	Not present	Rel-6	RBS7-166
– HS-SCCH Set Configuration	4	Rel-5	RBS7-167
– Timeslot number	The timeslot in which HS-SCCH is to be configured	Rel-5	RBS7-168
– Channelisation code	CC32/x where x is a previously unassigned channelisation code in this TS	Rel-7	RBS7-169
– Midamble Allocation mode	Default	Rel-5	RBS7-170
– Midamble configuration	8	Rel-5	RBS7-171
– BLER target	-2.4 (note that this equates to a BLER target of 0.4%, log10(0.004) = -2.4)	Rel-5	RBS7-172
– HS-SICH configuration			RBS7-173
– Timeslot number	The timeslot in which HS-SICH has been configured	Rel-5	RBS7-174
– Channelisation code	CC32/x where x is a previously unassigned channelisation code in this TS	Rel-7	RBS7-175
– Midamble Allocation mode	Default	Rel-5	RBS7-176
– Midamble configuration	8	Rel-5	RBS7-177
– Measurement Feedback Info		Rel-5	RBS7-178
– CHOICE mode	TDD	Rel-5	RBS7-179
– CHOICE TDD option	7.68 Mcps TDD	Rel-7	RBS7-180
– HS-PDSCH Timeslot Configuration VHCR		Rel-5	RBS7-181
– HS-PDSCH Timeslot Configuration List	Reference to TS 34.122 clause C.4.1 Parameter Set	Rel-5	RBS7-182
– Timeslot Number	The timeslot(s) in which HS-HS-DSCH is to configured	Rel-5	RBS7-183
– CHOICE Burst Type	Reference to TS 34.122 clause C.4.1 Parameter Set	Rel-5	RBS7-184
– Midamble Allocation Mode	Default	Rel-5	RBS7-185
– Midamble configuration burst type 1 and 3	8	Rel-5	RBS7-186
Downlink information common for all radio links	Not Present		RBS7-187
Downlink information for each radio link list	1		RBS7-188
– Downlink information for each radio link			RBS7-189
– Choice mode	7.68 Mcps TDD	Rel-7	RBS7-190
– Primary CCPCH info			RBS7-191
– Choice mode	TDD		RBS7-192
– CHOICE TDD option	7.68 Mcps TDD	Rel-7	RBS7-193
– CHOICE SyncCase	Sync Case 1		RBS7-194
– Timeslot	Set to Timeslot containing PCCPCH		RBS7-195
– Cell parameters ID	10		RBS7-196
- SCTD indicator	FALSE		RBS7-197
– CHOICE DPCH info	Downlink DPCH info for each RL		RBS7-198
– CHOICE mode	TDD		RBS7-199
– DL CCTrCH List	1 CCTrCh		RBS7-200
– TFCS ID	1		RBS7-201
– Activation time	Not Present		RBS7-202
– Duration	Not Present		RBS7-203
– Common timeslot info			RBS7-204
– 2nd interleaving mode	Reference to TS 34.122 clause C.3.1 Parameter Set		RBS7-205
– TFCI coding	Reference to TS 34.122 clause C.3.1 Parameter Set		RBS7-206
– Puncturing Limit	Reference to TS 34.122 clause C.3.1 Parameter Set		RBS7-207
– Repetition Period	Reference to TS 34.122 clause C.3.1 Parameter Set		RBS7-208
– Repetition Length	Reference to TS 34.122 clause C.3.1 Parameter Set		RBS7-209
– Downlink DPCH timeslots and codes VHCR		Rel-7	RBS7-210
– Individual timeslot info			RBS7-211
– Timeslot number	The number of a downlink timeslot that has unassigned codes.		RBS7-212
– TFCI existence	TRUE		RBS7-213
– Midamble shift and burst type			RBS7-214
– CHOICE TDD option	7.68 Mcps		RBS7-215
– CHOICE Burst Type	Reference to TS 34.122 clause C.3.1 Parameter Set		RBS7-216
– Midamble Allocation Mode	Default		RBS7-217
– Midamble configuration	Set Kcell to lowest possible value given the number of codes defined in TS 34.122 clause C.3.1 Parameter Set		RBS7-218
– CHOICE TDD option	7.68 Mcps	Rel-7	RBS7-219
– First timeslot channelisation codes VHCR		Rel-7	RBS7-220
– CHOICE codes representation	Consecutive codes		RBS7-221
– First channelisation code	(i/SF) where i is the lowest numbered code that is being assigned and SF is specified in TS 34.122 clause C.3.1 Parameter Set.		RBS7-222
– Last channelisation code	(j/SF) where j is the highest numbered code that is being assigned in the slot as specified in TS 34.122 clause C.3.1 Parameter Set.		RBS7-223
– CHOICE more timeslots	The presence of this IE depends upon whether the requirements of TS 34.122 clause C.3.1 Parameter Set could be met by the codes that have been assigned in the first timeslot.		RBS7-224
– UL CCTrCH TPC List	No Present		RBS7-225
– DL CCTrCH List to Remove	Not Present		RBS7-226
– E-AGCH Info	Not Present	Rel-6	RBS7-227
– CHOICE E-HICH Information	Not Present	Rel-6	RBS7-228
– CHOICE E-RGCH Information	Not Present	Rel-6	RBS7-229
MBMS PL Service Restriction Information	Not Present	Rel-6	RBS7-230

Contents of RADIO BEARER SETUP message: AM or UM (E-DCH and HSDPA) (3.84Mcps TDD)

Information Element	Value/remark	Version	Index
Message Type			RBSE3-001
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3		RBSE3-002
Integrity check info			RBSE3-003
– message authentication code	SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.		RBSE3-004
– RRC message sequence number	SS provides the value of this IE, from its internal counter.		RBSE3-005
Integrity protection mode info	Not Present		RBSE3-006
Ciphering mode info	Not Present		RBSE3-007
Activation time	Not Present		RBSE3-008
New U-RNTI	Not Present		RBSE3-009
New C-RNTI	Not Present		RBSE3-010
New H-RNTI	‘1010 1010 1010 1010’	Rel-5	RBSE3-011
New Primary E-RNTI	‘1010 1010 1010 1010’	Rel-6	RBSE3-012
New Secondary E-RNTI	Not Present	Rel-6	RBSE3-013
RRC State indicator	CELL_DCH		RBSE3-014
UTRAN DRX cycle length coefficient	Not Present		RBSE3-015
CN information info	Not Present		RBSE3-016
URA identity	Not Present		RBSE3-017
CHOICE specification mode	Complete specification	Rel-6	RBSE3-018
Signalling RB information to setup	Not Present		RBSE3-019
RAB information for setup list			RBSE3-020
– RAB information for setup			RBSE3-021
– RAB info	(high-speed UM DTCH for PS domain)		RBSE3-022
– RAB identity	0000 0110B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBSE3-023
– CN domain identity	PS domain		RBSE3-024
– NAS Synchronization Indicator	Not Present		RBSE3-025
– Re-establishment timer	UseT315		RBSE3-026
– RB information to setup			RBSE3-027
– RB identity	25		RBSE3-028
– PDCP info	Not Present		RBSE3-029
– CHOICE RLC info type	RLC info		RBSE3-030
– CHOICE Uplink RLC mode	Not Present		RBSE3-031
– CHOICE Downlink RLC mode	UM RLC		RBSE3-032
– DL UM RLC LI size	7	Rel-5	RBSE3-033
– One sided RLC re-establishment	FALSE	Rel-5	RBSE3-034
– RB mapping info			RBSE3-035
– Information for each multiplexing option	1 RBMuxOptions		RBSE3-036
– RLC logical channel mapping indicator	Not Present		RBSE3-037
– Downlink RLC logical channel info			RBSE3-038
– Number of downlink RLC logical channels	1		RBSE3-039
– Downlink transport channel type	HS-DSCH		RBSE3-040
– DL DCH Transport channel identity	Not Present		RBSE3-041
– DL DSCH Transport channel identity	Not Present		RBSE3-042
– DL HS-DSCH MAC-d flow identity	0		RBSE3-043
– Logical channel identity	Not Present		RBSE3-044
RB information to reconfigure list	Not Present	Rel-6	RBSE3-045
RB information to be affected list	Not Present		RBSE3-046
Downlink counter synchronization info	Not Present		RBSE3-047
PDCP ROHC target mode	Not Present	Rel-5	RBSE3-048
UL Transport channel information for all transport channels	Not Present		RBSE3-049
Deleted UL TrCH information list	Not Present		RBSE3-050
Added or Reconfigured TrCH information list			RBSE3-051
– Uplink transport channel type	E-DCH		RBSE3-052
– CHOICE UL parameters	E-DCH		RBSE3-053
– CHOICE mode	TDD		RBSE3-054
– HARQ info for E-DCH			RBSE3-055
– CHOICE UL parameters	E-DCH		RBSE3-056
– HARQ RV Configuration	rvtable		RBSE3-057
– Added or reconfigured E-DCH MAC-d flow			RBSE3-058
– E-DCH MAC-d flow identity	2		RBSE3-059
– E-DCH MAC-d flow power offset	0		RBSE3-060
– E-DCH MAC-d flow maximum number of retransmissions	7		RBSE3-061
– E-DCH MAC-d flow multiplexing list	Not Present		RBSE3-062
– CHOICE transmission grant type	Scheduled grant info		RBSE3-063
CHOICE mode	Not Present	R99 and Rel-4 only	RBSE3-064
DL Transport channel information common for all transport channel	Not Present		RBSE3-065
Deleted DL TrCH information	Not Present		RBSE3-066
Added or Reconfigured DL TrCH information list	1 TrCHs added		RBSE3-067
– Added or Reconfigured DL TrCH information			RBSE3-068
– Downlink transport channel type	HS-DSCH	Rel-5	RBSE3-069
– DL Transport channel identity	Not Present		RBSE3-070
– CHOICE DL parameters	HS-DSCH	Rel-5	RBSE3-071
– HARQ Info		Rel-5	RBSE3-072
– Number of Processes	Reference to TS34.122 Annex C Fixed Reference Channels	Rel-5	RBSE3-073
– CHOICE Memory Partitioning	Explicit	Rel-5	RBSE3-074
– Memory size	Reference to TS34.122 Annex C Fixed Reference Channels	Rel-5	RBSE3-075
– Process Memory Size	Reference to TS34.122 Annex C Fixed Reference Channels	Rel-5	RBSE3-076
– Added or reconfigured MAC-d flow		Rel-5	RBSE3-077
– MAC-hs queue to add or reconfigure list	(one queue)	Rel-5	RBSE3-078
– MAC-hs queue Id	0	Rel-5	RBSE3-079
– MAC-d Flow Identity	0	Rel-5	RBSE3-080
– T1	50	Rel-5	RBSE3-081
– MAC-hs window size	16	Rel-5	RBSE3-082
– MAC-d PDU size Info		Rel-5	RBSE3-083
– MAC-d PDU size	Reference to TS34.122 [2] Annex C Fixed Reference Channels	Rel-5	RBSE3-084
– MAC-d PDU size index	0	Rel-5	RBSE3-085
– MAC-hs queue to delete list	Not present	Rel-5	RBSE3-086
– DCH quality target	Not present		RBSE3-087
Frequency info	Not Present		RBSE3-088
Maximum allowed UL TX power	30dBm		RBSE3-089
CHOICE channel requirement	Uplink DPCH info		RBSE3-090
Uplink DPCH info		Rel-6	RBSE3-091
– Uplink DPCH power control info			RBSE3-092
– CHOICE mode	TDD		RBSE3-093
– UL target SIR	Not present		RBSE3-094
– CHOICE UL OL PC info	Broadcast UL OL PC info		RBSE3-095
– CHOICE mode	TDD		RBSE3-096
– Uplink Timing Advance Control			RBSE3-097
– CHOICE Timing Advance	Enabled		RBSE3-098
– CHOICE TDD option	3.84 Mcps TDD		RBSE3-099
– UL Timing Advance	Determined by observed timing deviation of the RACH at the node B		RBSE3-100
– UL CCTrCH List	1 CCTrCh		RBSE3-101
– TFCS Id	1		RBSE3-102
– UL target SIR	+20dB		RBSE3-103
– Activation time	Not present		RBSE3-104
– Duration	Not present		RBSE3-105
– Common timeslot info			RBSE3-106
– 2nd interleaving mode	Reference to TS 34.122 clause C.2.1 Parameter Set		RBSE3-107
– TFCI coding	Reference to TS 34.122 clause C.2.1 Parameter Set		RBSE3-108
– Puncturing Limit	Reference to TS 34.122 clause C.2.1 Parameter Set		RBSE3-109
– Repetition Period	1		RBSE3-110
– Repetition Length	1		RBSE3-111
– Uplink DPCH timeslots and codes			RBSE3-112
– Dynamic SF usage	TRUE		RBSE3-113
– Timeslot number	The number of an uplink timeslot that has unassigned codes.		RBSE3-114
– TFCI existence	TRUE		RBSE3-115
– Midamble shift and burst type			RBSE3-116
– CHOICE TDD option	3.84 Mcps		RBSE3-117
– CHOICE Burst Type	Reference to TS 34.122 clause C.2.1 Parameter Set		RBSE3-118
– Midamble Allocation Mode	Default		RBSE3-119
– Midamble configuration	Choose lowest possible Kcell value given burst type		RBSE3-120
– CHOICE TDD option	3.84 Mcps TDD		RBSE3-121
– First timeslot Code List	Repeated (1,2) for each channelisation code assigned in the slot to meet the needs of TS 34.122 clause C.2.1 Parameter Set.		RBSE3-122
– Channelisation code	(i/SF) where i denotes an unassigned code matching the SF specified in TS 34.122 clause C.2.1 Parameter Set.		RBSE3-123
– CHOICE more timeslots	The presence of this IE depends upon the number of resources specified in TS 34.122 clause C.2.1 Parameter Set and the number of slots in which they are being assigned.		RBSE3-124
– UL CCTrCH List to Remove	Not present		RBSE3-125
E-DCH Info		Rel-6	RBSE3-126
– MAC-es/e reset indicator	TRUE		RBSE3-127
– CHOICE mode	TDD		RBSE3-128
– CHOICE TDD mode	3.84 TDD		RBSE3-129
– E-RUCCH info			RBSE3-130
– E-RUCCH constant value	0dB		RBSE3-131
– E-RUCCH persistence scaling	0.9		RBSE3-132
– T-RUCCH	100ms		RBSE3-133
– E-RUCCH timeslot number	Not Present		RBSE3-134
– E-RUCCH midamble	Not Present		RBSE3-135
– T-adv	Not Present		RBSE3-136
– T-SCHED	Not Present		RBSE3-137
– CHOICE TDD option	3.84Mcps TDD		RBSE3-138
– CHOICE SF	Not present		RBSE3-139
– E-PUCH info			RBSE3-140
– E-TFCS information			RBSE3-141
– Reference Beta Information QPSK list	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE3-142
– Reference Code Rate	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE3-143
– Reference beta	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE3-144
– Reference Beta Information 16QAM list	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE3-145
– Reference Code Rate	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE3-146
– Reference beta	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE3-147
– CHOICE TDD mode	3.84Mcps TDD		RBSE3-148
– N_E-UCCH	Not Present		RBSE3-149
– E-PUCH constant value	0dB		RBSE3-150
– E-PUCH TS configuration list	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE3-151
– TS number	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE3-152
– CHOICE Burst Type	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE3-153
– Midamble configuration	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE3-154
– E-PUCH code hopping	TRUE		RBSE3-155
– E-PUCH TPC step size	1dB		RBSE3-156
– Minimum allowed code rate	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE3-157
– Maximum allowed code rate	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE3-158
Downlink HS-PDSCH Information		Rel-5	RBSE3-159
– HS-SCCH Info		Rel-5	RBSE3-160
– CHOICE mode	TDD	Rel-5	RBSE3-161
– CHOICE TDD option	3.84 Mcps TDD	Rel-5	RBSE3-162
– Ack-Nack Power Offset	0dB	Rel-5	RBSE3-163
– HS-SICH Power Control Info		Rel-5	RBSE3-164
– UL SIR target	0dB	Rel-5	RBSE3-165
– HS-SICH Constant Value	-10dB	Rel-5	RBSE3-166
– D_hs-sync	Not present	Rel-6	RBSE3-167
– HS-SCCH Set Configuration	4	Rel-5	RBSE3-168
– Timeslot number	The timeslot in which HS-SCCH is to be configured	Rel-5	RBSE3-169
– Channelisation code	CC16/x where x is a previously unassigned channelisation code in this TS	Rel-5	RBSE3-170
– Midamble Allocation mode	Default	Rel-5	RBSE3-171
– Midamble configuration	8	Rel-5	RBSE3-172
– BLER target	-2.4 (note that this equates to a BLER target of 0.4%, log10(0.004) = -2.4)	Rel-5	RBSE3-173
– HS-SICH configuration			RBSE3-174
– Timeslot number	The timeslot in which HS-SICH has been configured	Rel-5	RBSE3-175
– Channelisation code	CC16/x where x is a previously unassigned channelisation code in this TS	Rel-5	RBSE3-176
– Midamble Allocation mode	Default	Rel-5	RBSE3-177
– Midamble configuration	8	Rel-5	RBSE3-178
– Measurement Feedback Info		Rel-5	RBSE3-179
– CHOICE mode	TDD	Rel-5	RBSE3-180
– CHOICE TDD option	3.84 Mcps TDD	Rel-5	RBSE3-181
– HS-PDSCH Timeslot Configuration		Rel-5	RBSE3-182
– HS-PDSCH Timeslot Configuration List	Reference to TS 34.122 clause C.4.1 Parameter Set	Rel-5	RBSE3-183
– Timeslot Number	The timeslot(s) in which HS-HS-DSCH is to configured	Rel-5	RBSE3-184
– CHOICE Burst Type	Reference to TS 34.122 clause C.4.1 Parameter Set	Rel-5	RBSE3-185
– Midamble Allocation Mode	Default	Rel-5	RBSE3-186
– Midamble configuration burst type 1 and 3	8	Rel-5	RBSE3-187
Downlink information common for all radio links	Not Present		RBSE3-188
Downlink information per radio link list	1		RBSE3-189
– Downlink information for each radio link			RBSE3-190
– Choice mode	TDD		RBSE3-191
– Primary CCPCH info			RBSE3-192
– Choice mode	TDD		RBSE3-193
– CHOICE TDD option	3.84 Mcps TDD		RBSE3-194
– CHOICE SyncCase	Sync Case 1		RBSE3-195
– Timeslot	Set to Timeslot containing PCCPCH		RBSE3-196
– Cell parameters ID	10		RBSE3-197
- SCTD indicator	FALSE		RBSE3-198
– CHOICE DPCH info	Downlink DPCH info for each RL		RBSE3-199

Contents of RADIO BEARER SETUP message: AM or UM (E-DCH and HSDPA) (7.68Mcps TDD)

Information Element	Value/remark	Version	Index
Message Type			RBSE7-001
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3		RBSE7-002
Integrity check info			RBSE7-003
– message authentication code	SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.		RBSE7-004
– RRC message sequence number	SS provides the value of this IE, from its internal counter.		RBSE7-005
Integrity protection mode info	Not Present		RBSE7-006
Ciphering mode info	Not Present		RBSE7-007
Activation time	Not Present		RBSE7-008
New U-RNTI	Not Present		RBSE7-009
New C-RNTI	Not Present		RBSE7-010
New H-RNTI	‘1010 1010 1010 1010’	Rel-5	RBSE7-011
New Primary E-RNTI	‘1010 1010 1010 1010’	Rel-6	RBSE7-012
New Secondary E-RNTI	Not Present	Rel-6	RBSE7-013
RRC State indicator	CELL_DCH		RBSE7-014
UTRAN DRX cycle length coefficient	Not Present		RBSE7-015
CN information info	Not Present		RBSE7-016
URA identity	Not Present		RBSE7-017
CHOICE specification mode	Complete specification	Rel-6	RBSE7-018
Signalling RB information to setup	Not Present		RBSE7-019
RAB information for setup list			RBSE7-020
– RAB information for setup			RBSE7-021
– RAB info	(high-speed UM DTCH for PS domain)		RBSE7-022
– RAB identity	0000 0110B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBSE7-023
– CN domain identity	PS domain		RBSE7-024
– NAS Synchronization Indicator	Not Present		RBSE7-025
– Re-establishment timer	UseT315		RBSE7-026
– RB information to setup			RBSE7-027
– RB identity	25		RBSE7-028
– PDCP info	Not Present		RBSE7-029
– CHOICE RLC info type	RLC info		RBSE7-030
– CHOICE Uplink RLC mode	Not Present		RBSE7-031
– CHOICE Downlink RLC mode	UM RLC		RBSE7-032
– DL UM RLC LI size	7	Rel-5	RBSE7-033
– One sided RLC re-establishment	FALSE	Rel-5	RBSE7-034
– RB mapping info			RBSE7-035
– Information for each multiplexing option	1 RBMuxOptions		RBSE7-036
– RLC logical channel mapping indicator	Not Present		RBSE7-037
– Downlink RLC logical channel info			RBSE7-038
– Number of downlink RLC logical channels	1		RBSE7-039
– Downlink transport channel type	HS-DSCH		RBSE7-040
– DL DCH Transport channel identity	Not Present		RBSE7-041
– DL DSCH Transport channel identity	Not Present		RBSE7-042
– DL HS-DSCH MAC-d flow identity	0		RBSE7-043
– Logical channel identity	Not Present		RBSE7-044
RB information to reconfigure list	Not Present	Rel-6	RBSE7-045
RB information to be affected list	Not Present		RBSE7-046
Downlink counter synchronization info	Not Present		RBSE7-047
PDCP ROHC target mode	Not Present	Rel-5	RBSE7-048
UL Transport channel information for all transport channels	Not Present		RBSE7-049
Deleted UL TrCH information list	Not Present		RBSE7-050
Added or Reconfigured TrCH information list			RBSE7-051
– Uplink transport channel type	E-DCH		RBSE7-052
– CHOICE UL parameters	E-DCH		RBSE7-053
– CHOICE mode	TDD		RBSE7-054
– HARQ info for E-DCH			RBSE7-055
– CHOICE UL parameters	E-DCH		RBSE7-056
– HARQ RV Configuration	rvtable		RBSE7-057
– Added or reconfigured E-DCH MAC-d flow			RBSE7-058
– E-DCH MAC-d flow identity	2		RBSE7-059
– E-DCH MAC-d flow power offset	0		RBSE7-060
– E-DCH MAC-d flow maximum number of retransmissions	7		RBSE7-061
– E-DCH MAC-d flow multiplexing list	Not Present		RBSE7-062
– CHOICE transmission grant type	Scheduled grant info		RBSE7-063
CHOICE mode	Not Present	R99 and Rel-4 only	RBSE7-064
DL Transport channel information common for all transport channel	Not Present		RBSE7-065
Deleted DL TrCH information	Not Present		RBSE7-066
Added or Reconfigured DL TrCH information list	1 TrCHs added		RBSE7-067
– Added or Reconfigured DL TrCH information			RBSE7-068
– Downlink transport channel type	HS-DSCH	Rel-5	RBSE7-069
– DL Transport channel identity	Not Present		RBSE7-070
– CHOICE DL parameters	HS-DSCH	Rel-5	RBSE7-071
– HARQ Info		Rel-5	RBSE7-072
– Number of Processes	Reference to TS34.122 Annex C Fixed Reference Channels	Rel-5	RBSE7-073
– CHOICE Memory Partitioning	Explicit	Rel-5	RBSE7-074
– Memory size	Reference to TS34.122 Annex C Fixed Reference Channels	Rel-5	RBSE7-075
– Process Memory Size	Reference to TS34.122 Annex C Fixed Reference Channels	Rel-5	RBSE7-076
– Added or reconfigured MAC-d flow		Rel-5	RBSE7-077
– MAC-hs queue to add or reconfigure list	(one queue)	Rel-5	RBSE7-078
– MAC-hs queue Id	0	Rel-5	RBSE7-079
– MAC-d Flow Identity	0	Rel-5	RBSE7-080
– T1	50	Rel-5	RBSE7-081
– MAC-hs window size	16	Rel-5	RBSE7-082
– MAC-d PDU size Info		Rel-5	RBSE7-083
– MAC-d PDU size	Reference to TS34.122 Annex C Fixed Reference Channels	Rel-5	RBSE7-084
– MAC-d PDU size index	0	Rel-5	RBSE7-085
– MAC-hs queue to delete list	Not present	Rel-5	RBSE7-086
– DCH quality target	Not present		RBSE7-087
Frequency info	Not Present		RBSE7-088
Maximum allowed UL TX power	30dBm		RBSE7-089
CHOICE channel requirement	Uplink DPCH info		RBSE7-090
Uplink DPCH info		Rel-6	RBSE7-091
– Uplink DPCH power control info			RBSE7-092
– CHOICE mode	TDD		RBSE7-093
– UL target SIR	Not present		RBSE7-094
– CHOICE UL OL PC info	Broadcast UL OL PC info		RBSE7-095
– CHOICE mode	TDD		RBSE7-096
– Uplink Timing Advance Control			RBSE7-097
– CHOICE Timing Advance	Enabled		RBSE7-098
– CHOICE TDD option	7.68 Mcps TDD		RBSE7-099
– UL Timing Advance	Determined by observed timing deviation of the RACH at the node B		RBSE7-100
– UL CCTrCH List	1 CCTrCh		RBSE7-101
– TFCS Id	1		RBSE7-102
– UL target SIR	+20dB		RBSE7-103
– Activation time	Not present		RBSE7-104
– Duration	Not present		RBSE7-105
– Common timeslot info			RBSE7-106
– 2nd interleaving mode	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-107
– TFCI coding	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-108
– Puncturing Limit	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-109
– Repetition Period	1		RBSE7-110
– Repetition Length	1		RBSE7-111
– Uplink DPCH timeslots and codes			RBSE7-112
– Dynamic SF usage	TRUE		RBSE7-113
– Timeslot number	The number of an uplink timeslot that has unassigned codes.		RBSE7-114
– TFCI existence	TRUE		RBSE7-115
– Midamble shift and burst type			RBSE7-116
– CHOICE TDD option	7.68 Mcps		RBSE7-117
– CHOICE Burst Type	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-118
– Midamble Allocation Mode	Default		RBSE7-119
– Midamble configuration	Choose lowest possible Kcell value given burst type		RBSE7-120
– CHOICE TDD option	7.68 Mcps TDD		RBSE7-121
– First timeslot Code List	Repeated (1,2) for each channelisation code assigned in the slot to meet the needs of TS 34.122 clause C Parameter Set.		RBSE7-122
– Channelisation code	(i/SF) where i denotes an unassigned code matching the SF specified in TS 34.122 clause C Parameter Set.		RBSE7-123
– CHOICE more timeslots	The presence of this IE depends upon the number of resources specified in TS 34.122 clause C Parameter Set and the number of slots in which they are being assigned.		RBSE7-124
– UL CCTrCH List to Remove	Not present		RBSE7-125
E-DCH Info		Rel-6	RBSE7-126
– MAC-es/e reset indicator	TRUE		RBSE7-127
– CHOICE mode	TDD		RBSE7-128
– CHOICE TDD mode	7.68 TDD		RBSE7-129
– E-RUCCH info			RBSE7-130
– E-RUCCH constant value	0dB		RBSE7-131
– E-RUCCH persistence scaling	0.9		RBSE7-132
– T-RUCCH	100ms		RBSE7-133
– E-RUCCH timeslot number	Not Present		RBSE7-134
– E-RUCCH midamble	Not Present		RBSE7-135
– T-adv	Not Present		RBSE7-136
– T-SCHED	Not Present		RBSE7-137
– CHOICE TDD option	7.68Mcps TDD		RBSE7-138
– CHOICE SF	Not present		RBSE7-139
– E-PUCH info			RBSE7-140
– E-TFCS information			RBSE7-141
– Reference Beta Information QPSK list	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-142
– Reference Code Rate	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-143
– Reference beta	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-144
– Reference Beta Information 16QAM list	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-145
– Reference Code Rate	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-146
– Reference beta	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-147
– CHOICE TDD mode	7.68Mcps TDD		RBSE7-148
– N_E-UCCH	Not Present		RBSE7-149
– E-PUCH constant value	0dB		RBSE7-150
– E-PUCH TS configuration list	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-151
– TS number	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-152
– CHOICE Burst Type	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-153
– Midamble configuration	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-154
– E-PUCH code hopping	TRUE		RBSE7-155
– E-PUCH TPC step size	1dB		RBSE7-156
– Minimum allowed code rate	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-157
– Maximum allowed code rate	Reference to TS34.122 Annex C Fixed Reference Channels		RBSE7-158
Downlink HS-PDSCH Information		Rel-5	RBSE7-159
– HS-SCCH Info		Rel-5	RBSE7-160
– CHOICE mode	TDD	Rel-5	RBSE7-161
– CHOICE TDD option	7.68 Mcps TDD	Rel-5	RBSE7-162
– Ack-Nack Power Offset	0dB	Rel-5	RBSE7-163
– HS-SICH Power Control Info		Rel-5	RBSE7-164
– UL SIR target	0dB	Rel-5	RBSE7-165
– HS-SICH Constant Value	-10dB	Rel-5	RBSE7-166
– D_hs-sync	Not present	Rel-6	RBSE7-167
– HS-SCCH Set Configuration	4	Rel-5	RBSE7-168
– Timeslot number	The timeslot in which HS-SCCH is to be configured	Rel-5	RBSE7-169
– Channelisation code	CC32/x where x is a previously unassigned channelisation code in this TS	Rel-5	RBSE7-170
– Midamble Allocation mode	Default	Rel-5	RBSE7-171
– Midamble configuration	8	Rel-5	RBSE7-172
– BLER target	-2.4 (note that this equates to a BLER target of 0.4%, log10(0.004) = -2.4)	Rel-5	RBSE7-173
– HS-SICH configuration			RBSE7-174
– Timeslot number	The timeslot in which HS-SICH has been configured	Rel-5	RBSE7-175
– Channelisation code	CC32/x where x is a previously unassigned channelisation code in this TS	Rel-5	RBSE7-176
– Midamble Allocation mode	Default	Rel-5	RBSE7-177
– Midamble configuration	8	Rel-5	RBSE7-178
– Measurement Feedback Info		Rel-5	RBSE7-179
– CHOICE mode	TDD	Rel-5	RBSE7-180
– CHOICE TDD option	7.68 Mcps TDD	Rel-5	RBSE7-181
– HS-PDSCH Timeslot Configuration		Rel-5	RBSE7-182
– HS-PDSCH Timeslot Configuration List	Reference to TS 34.122 clause C.4.1 Parameter Set	Rel-5	RBSE7-183
– Timeslot Number	The timeslot(s) in which HS-HS-DSCH is to configured	Rel-5	RBSE7-184
– CHOICE Burst Type	Reference to TS 34.122 clause C.4.1 Parameter Set	Rel-5	RBSE7-185
– Midamble Allocation Mode	Default	Rel-5	RBSE7-186
– Midamble configuration burst type 1 and 3	8	Rel-5	RBSE7-187
Downlink information common for all radio links	Not Present		RBSE7-188
Downlink information per radio link list	1		RBSE7-189
– Downlink information for each radio link			RBSE7-190
– Choice mode	TDD		RBSE7-191
– Primary CCPCH info			RBSE7-192
– Choice mode	TDD		RBSE7-193
– CHOICE TDD option	7.68 Mcps TDD		RBSE7-194
– CHOICE SyncCase	Sync Case 1		RBSE7-195
– Timeslot	Set to Timeslot containing PCCPCH		RBSE7-196
– Cell parameters ID	10		RBSE7-197
- SCTD indicator	FALSE		RBSE7-198
– CHOICE DPCH info	Downlink DPCH info for each RL		RBSE7-199

Contents of RRC CONNECTION RELEASE message: UM

Information Element	Value/remark	Version
Message Type
U-RNTI	This IE is set to the following value when the message is transmitted on the DCCCH. When transmitted on CDCCH, this is absent.	R99, Rel-4
– SRNC identity	0000 0000 0001B
– S-RNTI	0000 0000 0000 0000 0001B
CHOICE identity type	This IE is set to the following value when the message is transmitted on the CCCH. When transmitted on DCCH, this is absent.	Rel-5
– U-RNTI
– SRNC identity	0000 0000 0001B
– S-RNTI	0000 0000 0000 0000 0001B
– Group identity	[FFS]
– Group release information	[FFS]
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3
Integrity check info	This IE is present when this message is transmitted on downlink DCCH. Else, this IE and the sub-IEs are omitted.
– Message authentication code	SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.
– RRC Message sequence number	SS provides the value of this IE, from its internal counter.
N308	2 (for CELL_DCH state). Not Present (for UE in other connected mode states).
Release cause	Normal event
Rplmn information	Not Present

Contents of RRC CONNECTION SETUP message: UM (3.84 Mcps TDD)

Information Element	Value/remark	Version	Index
Message Type			RCS3-001
Initial UE identity	Select the same identity as in the IE "Initial UE Identity" in received RRC CONNECTION REQUEST" message		RCS3-002
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3		RCS3-003
Activation time	Not Present(Now)		RCS3-004
New U-RNTI			RCS3-005
– SRNC identity	0000 0000 0001B		RCS3-006
– S-RNTI	0000 0000 0000 0000 0001B		RCS3-007
New C-RNTI	Not Present		RCS3-008
RRC State Indicator	CELL_DCH		RCS3-009
UTRAN DRX cycle length coefficient	9		RCS3-010
Capability update requirement			RCS3-011
– UE radio access FDD capability update requirement	FALSE		RCS3-012
– UE radio access TDD capability update requirement	TRUE		RCS3-013
– System specific capability update requirement list	GSM		RCS3-014
CHOICE specification mode	Complete specification	Rel-5	RCS3-015
– Complete specification		Rel-5	RCS3-016
– Signalling RB information to setup list	4 SRBs		RCS3-017
– Signalling RB information to setup	(UM DCCH for RRC)		RCS3-018
– RB identity	Not Present		RCS3-019
– CHOICE RLC info type	RLC info		RCS3-020
– CHOICE Uplink RLC mode	UM RLC		RCS3-021
– Transmission RLC discard	Not Present		RCS3-022
– CHOICE Downlink RLC mode	UM RLC		RCS3-023
– RB mapping info			RCS3-024
– Information for each multiplexing option	2 RBMuxOptions		RCS3-025
– RLC logical channel mapping indicator	Not Present		RCS3-026
– Number of RLC logical channels	1		RCS3-027
– Uplink transport channel type	DCH		RCS3-028
– UL Transport channel identity	5		RCS3-029
– Logical channel identity	1		RCS3-030
– CHOICE RLC size list	Configured		RCS3-031
– MAC logical channel priority	1		RCS3-032
– Downlink RLC logical channel info			RCS3-033
– Number of RLC logical channels	1		RCS3-034
– Downlink transport channel type	DCH		RCS3-035
– DL DCH Transport channel identity	10		RCS3-036
– DL DSCH Transport channel identity	Not Present		RCS3-037
– Logical channel identity	1		RCS3-038
– RLC logical channel mapping indicator	Not Present		RCS3-039
– Number of RLC logical channels	1		RCS3-040
– Uplink transport channel type	RACH		RCS3-041
– UL Transport channel identity	Not Present		RCS3-042
– Logical channel identity	1		RCS3-043
– CHOICE RLC size list	Configured		RCS3-044
– RLC size index	Reference to clause 6 Parameter Set		RCS3-045
– MAC logical channel priority	1		RCS3-046
– Downlink RLC logical channel info			RCS3-047
– Number of RLC logical channels	1		RCS3-048
– Downlink transport channel type	FACH		RCS3-049
– DL DCH Transport channel identity	Not Present		RCS3-050
– DL DSCH Transport channel identity	Not Present		RCS3-051
– Logical channel identity	1		RCS3-052
– Signalling RB information to setup	(AM DCCH for RRC)		RCS3-053
– RB identity	Not Present		RCS3-054
– CHOICE RLC info type			RCS3-055
– RLC info			RCS3-056
– CHOICE Uplink RLC mode	AM RLC		RCS3-057
– Transmission RLC discard			RCS3-058
– SDU discard mode	No Discard		RCS3-059
– MAX_DAT	415		RCS3-060
– Transmission window size	128		RCS3-061
– Timer_RST	500		RCS3-062
– Max_RST	4		RCS3-063
– Polling info			RCS3-064
– Timer_poll_prohibit	200		RCS3-065
– Timer_poll	200		RCS3-066
– Poll_PDU	Not Present		RCS3-067
– Poll_SDU	1		RCS3-068
– Last transmission PDU poll	TRUE		RCS3-069
– Last retransmission PDU poll	TRUE		RCS3-070
– Poll_Windows	99		RCS3-071
– Timer_poll_periodic	Not Present		RCS3-072
– CHOICE Downlink RLC mode	AM RLC		RCS3-073
– In-sequence delivery	TRUE		RCS3-074
– Receiving window size	128		RCS3-075
– Downlink RLC status info			RCS3-076
– Timer_status_prohibit	200		RCS3-077
– Timer_EPC	Not Present		RCS3-078
– Missing PDU indicator	TRUE		RCS3-079
– Timer_STATUS_periodic	Not Present		RCS3-080
– RB mapping info			RCS3-081
– Information for each multiplexing option	2 RBMuxOptions		RCS3-082
– RLC logical channel mapping indicator	Not Present		RCS3-083
– Number of RLC logical channels	1		RCS3-084
– Uplink transport channel type	DCH		RCS3-085
– UL Transport channel identity	5		RCS3-086
– Logical channel identity	2		RCS3-087
– CHOICE RLC size list	Configured		RCS3-088
– MAC logical channel priority	2		RCS3-089
– Downlink RLC logical channel info			RCS3-090
– Number of RLC logical channels	1		RCS3-091
– Downlink transport channel type	DCH		RCS3-092
– DL DCH Transport channel identity	10		RCS3-093
– DL DSCH Transport channel identity	Not Present		RCS3-094
– Logical channel identity	2		RCS3-095
– RLC logical channel mapping indicator	Not Present		RCS3-096
– Number of RLC logical channels	1		RCS3-097
– Uplink transport channel type	RACH		RCS3-098
– UL Transport channel identity	Not Present		RCS3-099
– Logical channel identity	2		RCS3-100
– CHOICE RLC size list	Explicit List		RCS3-101
– RLC size index	Reference to clause 6 Parameter Set		RCS3-102
– MAC logical channel priority	2		RCS3-103
– Downlink RLC logical channel info			RCS3-104
– Number of RLC logical channels	1		RCS3-105
– Downlink transport channel type	FACH		RCS3-106
– DL DCH Transport channel identity	Not Present		RCS3-107
– DL DSCH Transport channel identity	Not Present		RCS3-108
– Logical channel identity	2		RCS3-109
– Signalling RB information to setup	(AM DCCH for NAS_DT High priority)		RCS3-110
– RB identity	Not Present		RCS3-111
– CHOICE RLC info type			RCS3-112
– RLC info			RCS3-113
– CHOICE Uplink RLC mode	AM RLC		RCS3-114
– Transmission RLC discard			RCS3-115
– SDU discard mode	No Discard		RCS3-116
– MAX_DAT	415		RCS3-117
– Transmission window size	128		RCS3-118
– Timer_RST	500		RCS3-119
– Max_RST	4		RCS3-120
– Polling info			RCS3-121
– Timer_poll_prohibit	200		RCS3-122
– Timer_poll	200		RCS3-123
– Poll_PDU	Not Present		RCS3-124
– Poll_SDU	1		RCS3-125
– Last transmission PDU poll	TRUE		RCS3-126
– Last retransmission PDU poll	TRUE		RCS3-127
– Poll_Windows	99		RCS3-128
– Timer_poll_periodic	Not Present		RCS3-129
– CHOICE Downlink RLC mode	AM RLC		RCS3-130
– In-sequence delivery	TRUE		RCS3-131
– Receiving window size	128		RCS3-132
– Downlink RLC status info			RCS3-133
– Timer_status_prohibit	200		RCS3-134
– Timer_EPC	Not Present		RCS3-135
– Missing PDU indicator	TRUE		RCS3-136
– Timer_STATUS_periodic	Not Present		RCS3-137
– RB mapping info			RCS3-138
– Information for each multiplexing option	2 RBMuxOptions		RCS3-139
– RLC logical channel mapping indicator	Not Present		RCS3-140
– Number of RLC logical channels	1		RCS3-141
– Uplink transport channel type	DCH		RCS3-142
-UL Transport channel identity	5		RCS3-143
– Logical channel identity	3		RCS3-144
– CHOICE RLC size list	Configured		RCS3-145
– MAC logical channel priority	3		RCS3-146
– Downlink RLC logical channel info			RCS3-147
– Number of RLC logical channels	1		RCS3-148
– Downlink transport channel type	DCH		RCS3-149
– DL DCH Transport channel identity	10		RCS3-150
– DL DSCH Transport channel identity	Not Present		RCS3-151
– Logical channel identity	3		RCS3-152
– RLC logical channel mapping indicator	Not Present		RCS3-153
– Number of RLC logical channels	1		RCS3-154
– Uplink transport channel type	RACH		RCS3-155
– UL Transport channel identity	Not Present		RCS3-156
– Logical channel identity	3		RCS3-157
– CHOICE RLC size list	Explicit List		RCS3-158
– RLC size index	Reference to clause 6 Parameter Set		RCS3-159
– MAC logical channel priority	3		RCS3-160
– Downlink RLC logical channel info			RCS3-161
– Number of RLC logical channels	1		RCS3-162
– Downlink transport channel type	FACH		RCS3-163
– DL DCH Transport channel identity	Not Present		RCS3-164
– DL DSCH Transport channel identity	Not Present		RCS3-165
– Logical channel identity	3		RCS3-166
– Signalling RB information to setup	(AM DCCH for NAS_DT Low priority)		RCS3-167
– RB identity	Not Present		RCS3-168
– CHOICE RLC info type			RCS3-169
– RLC info			RCS3-170
– CHOICE Uplink RLC mode	AM RLC		RCS3-171
– Transmission RLC discard			RCS3-172
– SDU discard mode	No Discard		RCS3-173
– MAX_DAT	15		RCS3-174
– Transmission window size	128		RCS3-175
– Timer_RST	500		RCS3-176
– Max_RST	4		RCS3-177
– Polling info			RCS3-178
– Timer_poll_prohibit	200		RCS3-179
– Timer_poll	200		RCS3-180
– Poll_PDU	Not Present		RCS3-181
– Poll_SDU	1		RCS3-182
– Last transmission PDU poll	TRUE		RCS3-183
– Last retransmission PDU poll	TRUE		RCS3-184
– Poll_Windows	99		RCS3-185
– Timer_poll_periodic	Not Present		RCS3-186
– CHOICE Downlink RLC mode	AM RLC		RCS3-187
– In-sequence delivery	TRUE		RCS3-188
– Receiving window size	128		RCS3-189
– Downlink RLC status info			RCS3-190
– Timer_status_prohibit	200		RCS3-191
– Timer_EPC	Not Present		RCS3-192
– Missing PDU indicator	TRUE		RCS3-193
– Timer_STATUS_periodic	Not Present		RCS3-194
– RB mapping info			RCS3-195
– Information for each multiplexing option	2 RBMuxOptions		RCS3-196
– RLC logical channel mapping indicator	Not Present		RCS3-197
– Number of RLC logical channels	1		RCS3-198
– Uplink transport channel type	DCH		RCS3-199
– UL Transport channel identity	5		RCS3-200
– Logical channel identity	4		RCS3-201
– CHOICE RLC size list	Configured		RCS3-202
– MAC logical channel priority	4		RCS3-203
– Downlink RLC logical channel info			RCS3-204
– Number of RLC logical channels	1		RCS3-205
– Downlink transport channel type	DCH		RCS3-206
– DL DCH Transport channel identity	10		RCS3-207
– DL DSCH Transport channel identity	Not Present		RCS3-208
– Logical channel identity	4		RCS3-209
– RLC logical channel mapping indicator	Not Present		RCS3-210
– Number of RLC logical channels	1		RCS3-211
– Uplink transport channel type	RACH		RCS3-212
– UL Transport channel identity	Not Present		RCS3-213
– Logical channel identity	4		RCS3-214
– CHOICE RLC size list	Explicit List		RCS3-215
– RLC size index	Reference to clause 6 Parameter Set		RCS3-216
– MAC logical channel priority	4		RCS3-217
– Downlink RLC logical channel info			RCS3-218
– Number of RLC logical channels	1		RCS3-219
– Downlink transport channel type	FACH		RCS3-220
– DL DCH Transport channel identity	Not Present		RCS3-221
– DL DSCH Transport channel identity	Not Present		RCS3-222
– Logical channel identity	4		RCS3-223
UL Transport channel information for all transport channels			RCS3-224
– PRACH TFCS	Not Present		RCS3-225
– CHOICE Mode	TDD		RCS3-226
-Individual UL CCTrCH information			RCS3-227
– UL TFCS ID	(This IE is repeated for TFC number.)		RCS3-228
– UL TFCS			RCS3-229
– TFC subset	Default value is the complete existing set of transport format combinations		RCS3-230
– Allowed Transport Format combination	0 to MaxTFCvalue-1 (MaxTFCValue is refer to clause 6 Parameter Set.)		RCS3-231
– PRACH TFCS	(This IE is repeated for TFC number.)		RCS3-232
– CHOICE TFCI signalling	Normal		RCS3-233
– TFCI Field 1 information			RCS3-234
– TFCS complete reconfigure information			RCS3-235
– CHOICE TFCS Size	Number of used bits must be enough to cover all combinations of CTFC from clauses 6. Refer to clause 6 Parameter Set		RCS3-236
– CTFC information	Not Present		RCS3-237
– CHOICE mode	TDD		RCS3-238
– Individual UL CCTrCH information	Not Present		RCS3-239
Deleted TrCH information list	Not Present		RCS3-240
Added or Reconfigured UL TrCH information list	1		RCS3-241
– Added or Reconfigured UL TrCH information			RCS3-242
– Uplink transport channel type	DCH		RCS3-243
– UL Transport channel identity	5		RCS3-244
– TFS			RCS3-245
– CHOICE Transport channel type	Dedicated transport channels		RCS3-246
– Dynamic Transport Format Information			RCS3-247
– RLC size	According to clause 6		RCS3-248
– Number of TBs and TTI List	(This IE is repeated for TFI number)		RCS3-249
– CHOICE mode	TDD		RCS3-250
– Transmission Time Interval	According to clause 6		RCS3-251
– CHOICE Logical channel list	All		RCS3-252
– Semi-static Transport Format information			RCS3-253
DL Transport channel information common for all transport channel			RCS3-254
– SCCPCH TFCS	Not Present		RCS3-255
– CHOICE mode	TDD		RCS3-256
– CHOICE DL parameters	Same as UL		RCS3-257
Added or Reconfigured DL TrCH information list	1		RCS3-258
– Added or Reconfigured DL TrCH information			RCS3-259
– Downlink transport channel type	DCH		RCS3-260
– DL Transport channel identity	10		RCS3-261
– CHOICE DL parameters	Same as UL		RCS3-262
– Uplink transport channel type	DCH		RCS3-263
– UL TrCH Identity	5		RCS3-264
– DCH quality target			RCS3-265
– BLER Quality value	Reference to the present document		RCS3-266
Frequency info	Not Present		RCS3-267
Maximum allowed UL TX power	Not Present		RCS3-268
CHOICE channel requirement	Uplink DPCH info		RCS3-269
– Uplink DPCH power control info			RCS3-270
– CHOICE mode	TDD		RCS3-271
– CHOICE TDD option	3.84 Mcps		RCS3-272
– UL target SIR	Reference to clause 6 Parameter set		RCS3-273
– CHOICE mode	TDD		RCS3-274
– CHOICE UL OL PC info	Individually signalled		RCS3-275
– CHOICE TDD option	3.84 Mcps		RCS3-276
– Individual timeslot interference info	Not Present		RCS3-277
– Individual timeslot interference			RCS3-278
– DPCH Constant Value			RCS3-279
– Primary CCPCH Tx Power	Not Present		RCS3-280
– Time info			RCS3-281
– Activation time	(256+CFN-(CFN MOD 8 + 8))MOD 256		RCS3-282
– Duration	Infinite		RCS3-283
– Common timeslot info			RCS3-284
– 2nd interleaving mode	Reference to clause 6.10 Parameter Set		RCS3-285
– TFCI coding	Reference to clause 6.10 Parameter Set		RCS3-286
– Puncturing Limit	Reference to clause 6.10 Parameter Set		RCS3-287
– Repetition Period	Reference to clause 6.10 Parameter Set		RCS3-288
– Repetition Length	Reference to clause 6.10 Parameter Set		RCS3-289
– Uplink DPCH timeslots and codes	Default is to use the old timeslots and codes		RCS3-290
– CPCH SET Info	(no data)	R99 and Rel-4 only	RCS3-291
Downlink information common for all radio links			RCS3-292
– Downlink DPCH info common for all RL			RCS3-293
– Timing Indication	Initialize		RCS3-294
– CFN-targetSFN frame offset	Not Present		RCS3-295
– Downlink DPCH power control information			RCS3-296
– DPC mode	0 (single)		RCS3-297
– CHOICE mode	TDD		RCS3-298
– CHOICE TDD option	3.84 Mcps (no data)		RCS3-299
– Default DPCH Offset Value	Arbitrary set to value 0..306688 by step of 512		RCS3-300
Downlink information for per radio links list			RCS3-301
-Downlink information for each radio links			RCS3-302
– CHOICE mode	TDD		RCS3-303
– Primary CCPCH info			RCS3-304
– CHOICE SyncCase	Sync Case 1		RCS3-305
– Timeslot	PCCPCH timeslot		RCS3-306
– Cell parameters ID	0		RCS3-307
– SCTD indicator			RCS3-308
– Downlink DPCH info for each RL			RCS3-309
– CHOICE mode	TDD		RCS3-310
– DL CCTrCH List			RCS3-311
– TFCS ID	1		RCS3-312
– Time info			RCS3-313
– Activation time	(256+CFN-(CFN mod 8 + 8))mod 256		RCS3-314
– Duration	infinite		RCS3-315
– Common timeslot info			RCS3-316
– 2nd interleaving mode	Reference to the present document		RCS3-317
– TFCI coding	TRUE		RCS3-318
– Puncturing limit	Reference to clause 6 Parameter set		RCS3-319
– Repetition period	1		RCS3-320
– Repetition length	Empty		RCS3-321
– Downlink DPCH timeslots and codes			RCS3-322
– CHOICE more timeslots			RCS3-323
– CHOICE TDD option	3.84 Mcps		RCS3-324
– Timeslot number	The number of a downlink timeslot that has unassigned codes in a frame.		RCS3-325
– Individual timeslot info			RCS3-326
– TFCI existence	TRUE		RCS3-327
– Midamble shift and burst type			RCS3-328
– CHOICE TDD option	3.84 Mcps		RCS3-329
-CHOICE Burst Type			RCS3-330
-Type 1			RCS3-331
-Midamble Allocation Mode	Default		RCS3-332
– Midamble configuration burst type 1 and 3	As defined in 3GPP TS 25.221 [28]		RCS3-333
– First timeslot channelisation codes			RCS3-334
– First channelisation code	(i/SF) where i is the lowest numbered code that is being assigned and SF is specified in clause 6 Parameter Set..		RCS3-335
– Last channelisation code	(j/SF) where j is the highest numbered code that is being assigned in the slot.		RCS3-336
– CHOICE more timeslots	The presence of this IE depends upon whether the requirements of clause 6 Parameter Set could be met by the codes that have been assigned in the first timeslot.		RCS3-337
– UL CCTrCH TPC List	Not Present		RCS3-338
-SCCPCH information for FACH	Not Present	R99 and Rel-4 only	RCS3-339

Contents of RRC CONNECTION SETUP message: UM (1.28 Mcps TDD)

Information Element	Value/remark	Version	Index
Message Type			RCS1-001
Initial UE identity	Select the same identity as in the IE "Initial UE Identity" in received RRC CONNECTION REQUEST" message		RCS1-002
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3		RCS1-003
Activation time	Not Present(Now)		RCS1-004
New U-RNTI			RCS1-005
– SRNC identity	0000 0000 0001B		RCS1-006
– S-RNTI	0000 0000 0000 0000 0001B		RCS1-007
New C-RNTI	Not Present		RCS1-008
RRC State Indicator	CELL_DCH		RCS1-009
UTRAN DRX cycle length coefficient	9		RCS1-010
Capability update requirement			RCS1-011
– UE radio access FDD capability update requirement	FALSE		RCS1-012
– UE radio access 3.84 Mcps TDD capability update requirement	FALSE	Rel-4	RCS1-013
– UE radio access 7.68 Mcps TDD capability update requirement	FALSE	Rel-7	RCS1-014
– UE radio access 1.28 Mcps TDD capability update requirement	TRUE	Rel-4	RCS1-015
– System specific capability update requirement list	GSM		RCS1-016
CHOICE specification mode	Complete specification	Rel-5	RCS1-017
– Complete specification		Rel-5	RCS1-018
– Signalling RB information to setup list	4 SRBs		RCS1-019
– Signalling RB information to setup	(UM DCCH for RRC)		RCS1-020
– RB identity	Not Present		RCS1-021
– CHOICE RLC info type	RLC info		RCS1-022
– CHOICE Uplink RLC mode	UM RLC		RCS1-023
– Transmission RLC discard	Not Present		RCS1-024
– CHOICE Downlink RLC mode	UM RLC		RCS1-025
– DL UM RLC LI size	7 bit	Rel-6	RCS1-026
– One sided RLC re-establishment	FALSE	Rel-6	RCS1-027
– RB mapping info			RCS1-028
– Information for each multiplexing option	2 RBMuxOptions		RCS1-029
– RLC logical channel mapping indicator	Not Present		RCS1-030
– Number of RLC logical channels	1		RCS1-031
– Uplink transport channel type	DCH		RCS1-032
– UL Transport channel identity	5		RCS1-033
– Logical channel identity	1		RCS1-034
– CHOICE RLC size list	Configured		RCS1-035
– MAC logical channel priority	1		RCS1-036
– Downlink RLC logical channel info			RCS1-037
– Number of RLC logical channels	1		RCS1-038
– Downlink transport channel type	DCH		RCS1-039
– DL DCH Transport channel identity	10		RCS1-040
– DL DSCH Transport channel identity	Not Present		RCS1-041
– Logical channel identity	1		RCS1-042
– RLC logical channel mapping indicator	Not Present		RCS1-043
– Number of RLC logical channels	1		RCS1-044
– Uplink transport channel type	RACH		RCS1-045
– UL Transport channel identity	Not Present		RCS1-046
– Logical channel identity	1		RCS1-047
– CHOICE RLC size list	Explicit List		RCS1-048
– RLC size index	Reference to clause 6 Parameter Set		RCS1-049
– MAC logical channel priority	1		RCS1-050
– Downlink RLC logical channel info			RCS1-051
– Number of RLC logical channels	1		RCS1-052
– Downlink transport channel type	FACH		RCS1-053
– DL DCH Transport channel identity	Not Present		RCS1-054
– DL DSCH Transport channel identity	Not Present		RCS1-055
– Logical channel identity	1		RCS1-056
– Signalling RB information to setup	(AM DCCH for RRC)		RCS1-057
– RB identity	Not Present		RCS1-058
– CHOICE RLC info type			RCS1-059
– RLC info			RCS1-060
– CHOICE Uplink RLC mode	AM RLC		RCS1-061
– Transmission RLC discard			RCS1-062
– SDU discard mode	No Discard		RCS1-063
– MAX_DAT	15		RCS1-064
– Transmission window size	128		RCS1-065
– Timer_RST	500		RCS1-066
– Max_RST	4		RCS1-067
– Polling info			RCS1-068
– Timer_poll_prohibit	200		RCS1-069
– Timer_poll	200		RCS1-070
– Poll_PDU	Not Present		RCS1-071
– Poll_SDU	1		RCS1-072
– Last transmission PDU poll	TRUE		RCS1-073
– Last retransmission PDU poll	TRUE		RCS1-074
– Poll_Windows	99		RCS1-075
– Timer_poll_periodic	Not Present		RCS1-076
– CHOICE Downlink RLC mode	AM RLC		RCS1-077
– DL RLC PDU size	96 bits	Rel-6	RCS1-078
– In-sequence delivery	TRUE		RCS1-079
– Receiving window size	128		RCS1-080
– Downlink RLC status info			RCS1-081
– Timer_status_prohibit	200		RCS1-082
– Timer_EPC	Not Present		RCS1-083
– Missing PDU indicator	TRUE		RCS1-084
– Timer_STATUS_periodic	Not Present		RCS1-085
– RB mapping info			RCS1-086
– Information for each multiplexing option	2 RBMuxOptions		RCS1-087
– RLC logical channel mapping indicator	Not Present		RCS1-088
– Number of RLC logical channels	1		RCS1-089
– Uplink transport channel type	DCH		RCS1-090
– UL Transport channel identity	5		RCS1-091
– Logical channel identity	2		RCS1-092
– CHOICE RLC size list	Configured		RCS1-093
– MAC logical channel priority	2		RCS1-094
– Downlink RLC logical channel info			RCS1-095
– Number of RLC logical channels	1		RCS1-096
– Downlink transport channel type	DCH		RCS1-097
– DL DCH Transport channel identity	10		RCS1-098
– DL DSCH Transport channel identity	Not Present		RCS1-099
– Logical channel identity	2		RCS1-100
– RLC logical channel mapping indicator	Not Present		RCS1-101
– Number of RLC logical channels	1		RCS1-102
– Uplink transport channel type	RACH		RCS1-103
– UL Transport channel identity	Not Present		RCS1-104
– Logical channel identity	2		RCS1-105
– CHOICE RLC size list	Explicit List		RCS1-106
– RLC size index	Reference to clause 6 Parameter Set		RCS1-107
– MAC logical channel priority	2		RCS1-108
– Downlink RLC logical channel info			RCS1-109
– Number of RLC logical channels	1		RCS1-110
– Downlink transport channel type	FACH		RCS1-111
– DL DCH Transport channel identity	Not Present		RCS1-112
– DL DSCH Transport channel identity	Not Present		RCS1-113
– Logical channel identity	2		RCS1-114
– Signalling RB information to setup	(AM DCCH for NAS_DT High priority)		RCS1-115
– RB identity	Not Present		RCS1-116
– CHOICE RLC info type			RCS1-117
– RLC info			RCS1-118
– CHOICE Uplink RLC mode	AM RLC		RCS1-119
– Transmission RLC discard			RCS1-120
– SDU discard mode	No Discard		RCS1-121
– MAX_DAT	15		RCS1-122
– Transmission window size	128		RCS1-123
– Timer_RST	500		RCS1-124
– Max_RST	4		RCS1-125
– Polling info			RCS1-126
– Timer_poll_prohibit	200		RCS1-127
– Timer_poll	200		RCS1-128
– Poll_PDU	Not Present		RCS1-129
– Poll_SDU	1		RCS1-130
– Last transmission PDU poll	TRUE		RCS1-131
– Last retransmission PDU poll	TRUE		RCS1-132
– Poll_Windows	99		RCS1-133
– Timer_poll_periodic	Not Present		RCS1-134
– CHOICE Downlink RLC mode	AM RLC		RCS1-135
– DL RLC PDU size	96 bits	Rel-6	RCS1-136
– In-sequence delivery	TRUE		RCS1-137
– Receiving window size	128		RCS1-138
– Downlink RLC status info			RCS1-139
– Timer_status_prohibit	200		RCS1-140
– Timer_EPC	Not Present		RCS1-141
– Missing PDU indicator	TRUE		RCS1-142
– Timer_STATUS_periodic	Not Present		RCS1-143
– RB mapping info			RCS1-144
– Information for each multiplexing option	2 RBMuxOptions		RCS1-145
– RLC logical channel mapping indicator	Not Present		RCS1-146
– Number of RLC logical channels	1		RCS1-147
– Uplink transport channel type	DCH		RCS1-148
-UL Transport channel identity	5		RCS1-149
– Logical channel identity	3		RCS1-150
– CHOICE RLC size list	Configured		RCS1-151
– MAC logical channel priority	3		RCS1-152
– Downlink RLC logical channel info			RCS1-153
– Number of RLC logical channels	1		RCS1-154
– Downlink transport channel type	DCH		RCS1-155
– DL DCH Transport channel identity	10		RCS1-156
– DL DSCH Transport channel identity	Not Present		RCS1-157
– Logical channel identity	3		RCS1-158
– RLC logical channel mapping indicator	Not Present		RCS1-159
– Number of RLC logical channels	1		RCS1-160
– Uplink transport channel type	RACH		RCS1-161
– UL Transport channel identity	Not Present		RCS1-162
– Logical channel identity	3		RCS1-163
– CHOICE RLC size list	Explicit List		RCS1-164
– RLC size index	Reference to clause 6 Parameter Set		RCS1-165
– MAC logical channel priority	3		RCS1-166
– Downlink RLC logical channel info			RCS1-167
– Number of RLC logical channels	1		RCS1-168
– Downlink transport channel type	FACH		RCS1-169
– DL DCH Transport channel identity	Not Present		RCS1-170
– DL DSCH Transport channel identity	Not Present		RCS1-171
– Logical channel identity	3		RCS1-172
– Signalling RB information to setup	(AM DCCH for NAS_DT Low priority)		RCS1-173
– RB identity	Not Present		RCS1-174
– CHOICE RLC info type			RCS1-175
– RLC info			RCS1-176
– CHOICE Uplink RLC mode	AM RLC		RCS1-177
– Transmission RLC discard			RCS1-178
– SDU discard mode	No Discard		RCS1-179
– MAX_DAT	15		RCS1-180
– Transmission window size	128		RCS1-181
– Timer_RST	500		RCS1-182
– Max_RST	4		RCS1-183
– Polling info			RCS1-184
– Timer_poll_prohibit	200		RCS1-185
– Timer_poll	200		RCS1-186
– Poll_PDU	Not Present		RCS1-187
– Poll_SDU	1		RCS1-188
– Last transmission PDU poll	TRUE		RCS1-189
– Last retransmission PDU poll	TRUE		RCS1-190
– Poll_Windows	99		RCS1-191
– Timer_poll_periodic	Not Present		RCS1-192
– CHOICE Downlink RLC mode	AM RLC		RCS1-193
– DL RLC PDU size	96 bits	Rel-6	RCS1-194
– In-sequence delivery	TRUE		RCS1-195
– Receiving window size	128		RCS1-196
– Downlink RLC status info			RCS1-197
– Timer_status_prohibit	200		RCS1-198
– Timer_EPC	Not Present		RCS1-199
– Missing PDU indicator	TRUE		RCS1-200
– Timer_STATUS_periodic	Not Present		RCS1-201
– RB mapping info			RCS1-202
– Information for each multiplexing option	2 RBMuxOptions		RCS1-203
– RLC logical channel mapping indicator	Not Present		RCS1-204
– Number of RLC logical channels	1		RCS1-205
– Uplink transport channel type	DCH		RCS1-206
– UL Transport channel identity	5		RCS1-207
– Logical channel identity	4		RCS1-208
– CHOICE RLC size list	Configured		RCS1-209
– MAC logical channel priority	4		RCS1-210
– Downlink RLC logical channel info			RCS1-211
– Number of RLC logical channels	1		RCS1-212
– Downlink transport channel type	DCH		RCS1-213
– DL DCH Transport channel identity	10		RCS1-214
– DL DSCH Transport channel identity	Not Present		RCS1-215
– Logical channel identity	4		RCS1-216
– RLC logical channel mapping indicator	Not Present		RCS1-217
– Number of RLC logical channels	1		RCS1-218
– Uplink transport channel type	RACH		RCS1-219
– UL Transport channel identity	Not Present		RCS1-220
– Logical channel identity	4		RCS1-221
– CHOICE RLC size list	Explicit List		RCS1-222
– RLC size index	Reference to clause 6 Parameter Set		RCS1-223
– MAC logical channel priority	4		RCS1-224
– Downlink RLC logical channel info			RCS1-225
– Number of RLC logical channels	1		RCS1-226
– Downlink transport channel type	FACH		RCS1-227
– DL DCH Transport channel identity	Not Present		RCS1-228
– DL DSCH Transport channel identity	Not Present		RCS1-229
– Logical channel identity	4		RCS1-230
UL Transport channel information for all transport channels			RCS1-231
– PRACH TFCS	Not Present		RCS1-232
– CHOICE Mode	TDD		RCS1-233
-Individual UL CCTrCH information			RCS1-234
– UL TFCS Identity			RCS1-235
– TFCS ID	1		RCS1-236
– Shared Channel Indicator	FALSE		RCS1-237
– UL TFCS			RCS1-238
– CHOICE TFCI signalling	Normal		RCS1-239
– TFCI Field 1 Information			RCS1-240
– CHOICE TFCS representation	Complete reconfiguration		RCS1-241
– TFCS complete reconfiguration information			RCS1-242
– CHOICE CTFC Size	2 bit CTFC		RCS1-243
– CTFC information	2 TFCs		RCS1-244
– 2 bit CTFC	0		RCS1-245
– Power offset Information	Not Present		RCS1-246
– 2 bit CTFC	1		RCS1-247
– Power offset Information	Not Present		RCS1-248
– TFC subset	Full transport format combination set		RCS1-249
– no data			RCS1-250
– TFC subset list	Not Present	Rel-4	RCS1-251
Deleted TrCH information list	Not Present		RCS1-252
Added or Reconfigured UL TrCH information list	1		RCS1-253
– Added or Reconfigured UL TrCH information			RCS1-254
– Uplink transport channel type	DCH		RCS1-255
– UL Transport channel identity	5		RCS1-256
– TFS			RCS1-257
– CHOICE Transport channel type	Dedicated transport channels		RCS1-258
– Dynamic Transport Format Information			RCS1-259
– RLC size	96 bits		RCS1-260
– Number of TBs and TTI List	2		RCS1-261
– Transmission Time Interval	Not Present		RCS1-262
– Number of Transport blocks	0		RCS1-263
– Transmission Time Interval	Not Present		RCS1-264
– Number of Transport blocks	1		RCS1-265
– CHOICE Logical channel list	All		RCS1-266
– Semi-static Transport Format information			RCS1-267
– Transmission time interval	40		RCS1-268
– Type of channel coding	Convolutional		RCS1-269
– Coding Rate	1/3		RCS1-270
– Rate matching attribute	240		RCS1-271
– CRC size	12		RCS1-272
DL Transport channel information common for all transport channel			RCS1-273
– SCCPCH TFCS	Not Present		RCS1-274
– CHOICE mode	TDD		RCS1-275
– CHOICE DL parameters	Same as UL		RCS1-276
Added or Reconfigured DL TrCH information list	1		RCS1-277
– Added or Reconfigured DL TrCH information			RCS1-278
– Downlink transport channel type	DCH		RCS1-279
– DL Transport channel identity	10		RCS1-280
– CHOICE DL parameters	Same as UL		RCS1-281
– Uplink transport channel type	DCH		RCS1-282
– UL TrCH Identity	5		RCS1-283
– DCH quality target			RCS1-284
– BLER Quality value	-20 (-2.0)		RCS1-285
Frequency info	Not Present		RCS1-286
Maximum allowed UL TX power	Not Present		RCS1-287
CHOICE channel requirement	Uplink DPCH info		RCS1-288
– Uplink DPCH power control info			RCS1-289
– CHOICE mode	TDD		RCS1-290
– CHOICE TDD option	1.28 Mcps	Rel-4	RCS1-291
– PRXPDPCHdes	Reference to clause 6 Parameter set	Rel-4	RCS1-292
– CHOICE mode	TDD		RCS1-293
– CHOICE UL OL PC info	Individually signalled		RCS1-294
– CHOICE TDD option	1.28 Mcps	Rel-4	RCS1-295
– Beacon PL Est.	Not Present	Rel-6	RCS1-296
– TPC step size	1 dB	Rel-4	RCS1-297
– Primary CCPCH Tx Power	30 dBm		RCS1-298
			RCS1-299
– CHOICE mode	TDD		RCS1-300
– Uplink Timing Advance Control			RCS1-301
– CHOICE Timing Advance	enabled		RCS1-302
– CHOICE TDD option	1.28 Mcps	Rel-4	RCS1-303
– Uplink synchronization parameters			RCS1-304
– Uplink synchronization step size	1		RCS1-305
– Uplink synchronization frequency	1		RCS1-306
– Synchronization parameters	Not present		RCS1-307
– UL CCTrCH List			RCS1-308
– TFCS ID	1		RCS1-309
– PRXPDPCHdes	Reference to clause 6 Parameter set	Rel-4	RCS1-310
– Time info			RCS1-311
– Activation time	Not present		RCS1-312
– Duration	Not present		RCS1-313
– Common timeslot info			RCS1-314
– 2nd interleaving mode	Frame		RCS1-315
– TFCI coding	8 bits		RCS1-316
– Puncturing Limit	1.0		RCS1-317
– Repetition Period	1		RCS1-318
– Repetition Length	Null		RCS1-319
– CHOICE TDD option	1.28 Mcps	Rel-7	RCS1-320
– Uplink DPCH timeslots and codes LCR	Default is to use the old timeslots and codes	Rel-7	RCS1-321
– Dynamic SF usage	FALSE		RCS1-322
– First individual timeslot info			RCS1-323
– Timeslot number			RCS1-324
– CHOICE TDD option	1.28 Mcps TDD	Rel-4	RCS1-325
– Timeslot number	1 OR 2 OR 3		RCS1-326
– TFCI existence	TRUE		RCS1-327
– Midamble shift and burst type			RCS1-328
– CHOICE TDD option	1.28 Mcps TDD	Rel-4	RCS1-329
– Midamble allocation mode	Default midamble		RCS1-330
– Midamble configuration	4 (k=8)		RCS1-331
– Midamble Shift	Not Present		RCS1-332
– CHOICE TDD option	1.28 Mcps TDD	Rel-4	RCS1-333
– Modulation	QPSK		RCS1-334
– SS-TPC Symbols	1		RCS1-335
– Additional TPC-SS Symbols	Not Present		RCS1-336
– First timeslot Code List	Repeated (1,2) for each channelisation code assigned in the slot to meet the needs of clause 6 Parameter Set.		RCS1-337
– channelisation codes	(SF/ i) where i denotes an unassigned code matching the SF specified in clause 6 Parameter Set.		RCS1-338
– CHOICE more timeslots	No more timeslots		RCS1-339
Downlink information common for all radio links			RCS1-340
– Downlink DPCH info common for all RL			RCS1-341
– Timing Indication	Initialize		RCS1-342
– CFN-targetSFN frame offset	Not Present		RCS1-343
– Downlink DPCH power control information			RCS1-344
– CHOICE mode	TDD		RCS1-345
– TPC Step Size	1		RCS1-346
– CHOICE mode	TDD		RCS1-347
– CHOICE TDD option	1.28 Mcps	Rel-4	RCS1-348
– TSTD indicator	FALSE		RCS1-349
– Default DPCH Offset Value	Arbitrary set to value 0..306688 by step of 512		RCS1-350
Downlink information for per radio links list			RCS1-351
-Downlink information for each radio links			RCS1-352
– CHOICE mode	TDD		RCS1-353
– Primary CCPCH info			RCS1-354
– CHOICE mode	TDD		RCS1-355
– CHOICE TDD option	1.28 Mcps	Rel-4	RCS1-356
– TSTD indicator	FALSE		RCS1-357
– Cell parameters ID	0		RCS1-358
– SCTD indicator	FALSE		RCS1-359
– Downlink DPCH info for each RL			RCS1-360
– CHOICE mode	TDD		RCS1-361
– DL CCTrCH List			RCS1-362
– TFCS ID	1		RCS1-363
– Time info			RCS1-364
– Activation time	Not present		RCS1-365
– Duration	Not present		RCS1-366
– Common timeslot info			RCS1-367
– 2nd interleaving mode	Frame		RCS1-368
– TFCI coding	8 bits		RCS1-369
– Puncturing limit	1.0		RCS1-370
– Repetition period	1		RCS1-371
– Repetition length	Empty		RCS1-372
– Downlink DPCH timeslots and codes			RCS1-373
– First Individual timeslot info			RCS1-374
– Timeslot number			RCS1-375
– CHOICE TDD option	1.28 Mcps	Rel-4	RCS1-376
– Timeslot number	The number of a downlink timeslot that has unassigned codes in a subframe.		RCS1-377
– TFCI existence	TRUE		RCS1-378
– Midamble shift and burst type			RCS1-379
– CHOICE TDD option	1.28 Mcps	Rel-4	RCS1-380
– Midamble Allocation Mode	Default midamble		RCS1-381
– Midamble configuration	As defined in 3GPP TS 25.221 [28]		RCS1-382
– Midamble Shift	Not present		RCS1-383
– CHOICE TDD option	1.28 Mcps	Rel-4	RCS1-384
– Modulation	QPSK		RCS1-385
– SS-TPC Symbols	1		RCS1-386
– Additional TPC-SS Symbols	Not present		RCS1-387
– First timeslot channelisation codes			RCS1-388
– First channelisation code	(i/SF) where i is the lowest numbered code that is being assigned and SF is specified in clause 6 Parameter Set.		RCS1-389
– Last channelisation code	(j/SF) where j is the highest numbered code that is being assigned in the slot.		RCS1-390
– CHOICE more timeslots	The presence of this IE depends upon whether the requirements of clause 6 Parameter Set could be met by the codes that have been assigned in the first timeslot.		RCS1-391
– UL CCTrCH TPC List	Not Present		RCS1-392
-SCCPCH information for FACH	Not Present	R99 and Rel-4 only	RCS1-393

Contents of RRC CONNECTION SETUP message: UM (7.68 Mcps TDD)

Information Element	Value/remark	Version	Index
Message Type			RCS7-001
Initial UE identity	Select the same identity as in the IE "Initial UE Identity" in received RRC CONNECTION REQUEST" message		RCS7-002
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3		RCS7-003
Activation time	Not Present(Now)		RCS7-004
New U-RNTI			RCS7-005
– SRNC identity	0000 0000 0001B		RCS7-006
– S-RNTI	0000 0000 0000 0000 0001B		RCS7-007
New C-RNTI	Not Present		RCS7-008
New H-RNTI	Not Present	Rel-6	RCS7-009
CHOICE mode	TDD	Rel-7	RCS7-010
– New E-RNTI	Not Present	Rel-7	RCS7-011
RRC State Indicator	CELL_DCH		RCS7-012
UTRAN DRX cycle length coefficient	9		RCS7-013
Capability update requirement			RCS7-014
– UE radio access FDD capability update requirement	FALSE		RCS7-015
– UE radio access TDD capability update requirement	TRUE		RCS7-016
– System specific capability update requirement list	GSM		RCS7-017
CHOICE specification mode	Complete specification	Rel-5	RCS7-018
– Complete specification		Rel-5	RCS7-019
– Signalling RB information to setup list	4 SRBs		RCS7-020
– Signalling RB information to setup	(UM DCCH for RRC)		RCS7-021
– RB identity	Not Present		RCS7-022
– CHOICE RLC info type	RLC info		RCS7-023
– CHOICE Uplink RLC mode	UM RLC		RCS7-024
– Transmission RLC discard	Not Present		RCS7-025
– CHOICE Downlink RLC mode	UM RLC		RCS7-026
– RB mapping info			RCS7-027
– Information for each multiplexing option	2 RBMuxOptions		RCS7-028
– RLC logical channel mapping indicator	Not Present		RCS7-029
– Number of RLC logical channels	1		RCS7-030
– Uplink transport channel type	DCH		RCS7-031
– UL Transport channel identity	5		RCS7-032
– Logical channel identity	1		RCS7-033
– CHOICE RLC size list	Configured		RCS7-034
– MAC logical channel priority	1		RCS7-035
– Downlink RLC logical channel info			RCS7-036
– Number of RLC logical channels	1		RCS7-037
– Downlink transport channel type	DCH		RCS7-038
– DL DCH Transport channel identity	10		RCS7-039
– DL DSCH Transport channel identity	Not Present		RCS7-040
– Logical channel identity	1		RCS7-041
– RLC logical channel mapping indicator	Not Present		RCS7-042
– Number of RLC logical channels	1		RCS7-043
– Uplink transport channel type	RACH		RCS7-044
– UL Transport channel identity	Not Present		RCS7-045
– Logical channel identity	1		RCS7-046
– CHOICE RLC size list	Configured		RCS7-047
– RLC size index	Reference to clause 6 Parameter Set		RCS7-048
– MAC logical channel priority	1		RCS7-049
– Downlink RLC logical channel info			RCS7-050
– Number of RLC logical channels	1		RCS7-051
– Downlink transport channel type	FACH		RCS7-052
– DL DCH Transport channel identity	Not Present		RCS7-053
– DL DSCH Transport channel identity	Not Present		RCS7-054
– Logical channel identity	1		RCS7-055
– Signalling RB information to setup	(AM DCCH for RRC)		RCS7-056
– RB identity	Not Present		RCS7-057
– CHOICE RLC info type			RCS7-058
– RLC info			RCS7-059
– CHOICE Uplink RLC mode	AM RLC		RCS7-060
– Transmission RLC discard			RCS7-061
– SDU discard mode	No Discard		RCS7-062
– MAX_DAT	415		RCS7-063
– Transmission window size	128		RCS7-064
– Timer_RST	500		RCS7-065
– Max_RST	4		RCS7-066
– Polling info			RCS7-067
– Timer_poll_prohibit	200		RCS7-068
– Timer_poll	200		RCS7-069
– Poll_PDU	Not Present		RCS7-070
– Poll_SDU	1		RCS7-071
– Last transmission PDU poll	TRUE		RCS7-072
– Last retransmission PDU poll	TRUE		RCS7-073
– Poll_Windows	99		RCS7-074
– Timer_poll_periodic	Not Present		RCS7-075
– CHOICE Downlink RLC mode	AM RLC		RCS7-076
– In-sequence delivery	TRUE		RCS7-077
– Receiving window size	128		RCS7-078
– Downlink RLC status info			RCS7-079
– Timer_status_prohibit	200		RCS7-080
– Timer_EPC	Not Present		RCS7-081
– Missing PDU indicator	TRUE		RCS7-082
– Timer_STATUS_periodic	Not Present		RCS7-083
– RB mapping info			RCS7-084
– Information for each multiplexing option	2 RBMuxOptions		RCS7-085
– RLC logical channel mapping indicator	Not Present		RCS7-086
– Number of RLC logical channels	1		RCS7-087
– Uplink transport channel type	DCH		RCS7-088
– UL Transport channel identity	5		RCS7-089
– Logical channel identity	2		RCS7-090
– CHOICE RLC size list	Configured		RCS7-091
– MAC logical channel priority	2		RCS7-092
– Downlink RLC logical channel info			RCS7-093
– Number of RLC logical channels	1		RCS7-094
– Downlink transport channel type	DCH		RCS7-095
– DL DCH Transport channel identity	10		RCS7-096
– DL DSCH Transport channel identity	Not Present		RCS7-097
– Logical channel identity	2		RCS7-098
– RLC logical channel mapping indicator	Not Present		RCS7-099
– Number of RLC logical channels	1		RCS7-100
– Uplink transport channel type	RACH		RCS7-101
– UL Transport channel identity	Not Present		RCS7-102
– Logical channel identity	2		RCS7-103
– CHOICE RLC size list	Explicit List		RCS7-104
– RLC size index	Reference to clause 6 Parameter Set		RCS7-105
– MAC logical channel priority	2		RCS7-106
– Downlink RLC logical channel info			RCS7-107
– Number of RLC logical channels	1		RCS7-108
– Downlink transport channel type	FACH		RCS7-109
– DL DCH Transport channel identity	Not Present		RCS7-110
– DL DSCH Transport channel identity	Not Present		RCS7-111
– Logical channel identity	2		RCS7-112
– Signalling RB information to setup	(AM DCCH for NAS_DT High priority)		RCS7-113
– RB identity	Not Present		RCS7-114
– CHOICE RLC info type			RCS7-115
– RLC info			RCS7-116
– CHOICE Uplink RLC mode	AM RLC		RCS7-117
– Transmission RLC discard			RCS7-118
– SDU discard mode	No Discard		RCS7-119
– MAX_DAT	415		RCS7-120
– Transmission window size	128		RCS7-121
– Timer_RST	500		RCS7-122
– Max_RST	4		RCS7-123
– Polling info			RCS7-124
– Timer_poll_prohibit	200		RCS7-125
– Timer_poll	200		RCS7-126
– Poll_PDU	Not Present		RCS7-127
– Poll_SDU	1		RCS7-128
– Last transmission PDU poll	TRUE		RCS7-129
– Last retransmission PDU poll	TRUE		RCS7-130
– Poll_Windows	99		RCS7-131
– Timer_poll_periodic	Not Present		RCS7-132
– CHOICE Downlink RLC mode	AM RLC		RCS7-133
– In-sequence delivery	TRUE		RCS7-134
– Receiving window size	128		RCS7-135
– Downlink RLC status info			RCS7-136
– Timer_status_prohibit	200		RCS7-137
– Timer_EPC	Not Present		RCS7-138
– Missing PDU indicator	TRUE		RCS7-139
– Timer_STATUS_periodic	Not Present		RCS7-140
– RB mapping info			RCS7-141
– Information for each multiplexing option	2 RBMuxOptions		RCS7-142
– RLC logical channel mapping indicator	Not Present		RCS7-143
– Number of RLC logical channels	1		RCS7-144
– Uplink transport channel type	DCH		RCS7-145
-UL Transport channel identity	5		RCS7-146
– Logical channel identity	3		RCS7-147
– CHOICE RLC size list	Configured		RCS7-148
– MAC logical channel priority	3		RCS7-149
– Downlink RLC logical channel info			RCS7-150
– Number of RLC logical channels	1		RCS7-151
– Downlink transport channel type	DCH		RCS7-152
– DL DCH Transport channel identity	10		RCS7-153
– DL DSCH Transport channel identity	Not Present		RCS7-154
– Logical channel identity	3		RCS7-155
– RLC logical channel mapping indicator	Not Present		RCS7-156
– Number of RLC logical channels	1		RCS7-157
– Uplink transport channel type	RACH		RCS7-158
– UL Transport channel identity	Not Present		RCS7-159
– Logical channel identity	3		RCS7-160
– CHOICE RLC size list	Explicit List		RCS7-161
– RLC size index	Reference to clause 6 Parameter Set		RCS7-162
– MAC logical channel priority	3		RCS7-163
– Downlink RLC logical channel info			RCS7-164
– Number of RLC logical channels	1		RCS7-165
– Downlink transport channel type	FACH		RCS7-166
– DL DCH Transport channel identity	Not Present		RCS7-167
– DL DSCH Transport channel identity	Not Present		RCS7-168
– Logical channel identity	3		RCS7-169
– Signalling RB information to setup	(AM DCCH for NAS_DT Low priority)		RCS7-170
– RB identity	Not Present		RCS7-171
– CHOICE RLC info type			RCS7-172
– RLC info			RCS7-173
– CHOICE Uplink RLC mode	AM RLC		RCS7-174
– Transmission RLC discard			RCS7-175
– SDU discard mode	No Discard		RCS7-176
– MAX_DAT	15		RCS7-177
– Transmission window size	128		RCS7-178
– Timer_RST	500		RCS7-179
– Max_RST	4		RCS7-180
– Polling info			RCS7-181
– Timer_poll_prohibit	200		RCS7-182
– Timer_poll	200		RCS7-183
– Poll_PDU	Not Present		RCS7-184
– Poll_SDU	1		RCS7-185
– Last transmission PDU poll	TRUE		RCS7-186
– Last retransmission PDU poll	TRUE		RCS7-187
– Poll_Windows	99		RCS7-188
– Timer_poll_periodic	Not Present		RCS7-189
– CHOICE Downlink RLC mode	AM RLC		RCS7-190
– In-sequence delivery	TRUE		RCS7-191
– Receiving window size	128		RCS7-192
– Downlink RLC status info			RCS7-193
– Timer_status_prohibit	200		RCS7-194
– Timer_EPC	Not Present		RCS7-195
– Missing PDU indicator	TRUE		RCS7-196
– Timer_STATUS_periodic	Not Present		RCS7-197
– RB mapping info			RCS7-198
– Information for each multiplexing option	2 RBMuxOptions		RCS7-199
– RLC logical channel mapping indicator	Not Present		RCS7-200
– Number of RLC logical channels	1		RCS7-201
– Uplink transport channel type	DCH		RCS7-202
– UL Transport channel identity	5		RCS7-203
– Logical channel identity	4		RCS7-204
– CHOICE RLC size list	Configured		RCS7-205
– MAC logical channel priority	4		RCS7-206
– Downlink RLC logical channel info			RCS7-207
– Number of RLC logical channels	1		RCS7-208
– Downlink transport channel type	DCH		RCS7-209
– DL DCH Transport channel identity	10		RCS7-210
– DL DSCH Transport channel identity	Not Present		RCS7-211
– Logical channel identity	4		RCS7-212
– RLC logical channel mapping indicator	Not Present		RCS7-213
– Number of RLC logical channels	1		RCS7-214
– Uplink transport channel type	RACH		RCS7-215
– UL Transport channel identity	Not Present		RCS7-216
– Logical channel identity	4		RCS7-217
– CHOICE RLC size list	Explicit List		RCS7-218
– RLC size index	Reference to clause 6 Parameter Set		RCS7-219
– MAC logical channel priority	4		RCS7-220
– Downlink RLC logical channel info			RCS7-221
– Number of RLC logical channels	1		RCS7-222
– Downlink transport channel type	FACH		RCS7-223
– DL DCH Transport channel identity	Not Present		RCS7-224
– DL DSCH Transport channel identity	Not Present		RCS7-225
– Logical channel identity	4		RCS7-226
UL Transport channel information for all transport channels			RCS7-227
– PRACH TFCS	Not Present		RCS7-228
– CHOICE Mode	TDD		RCS7-229
-Individual UL CCTrCH information			RCS7-230
– UL TFCS ID	(This IE is repeated for TFC number.)		RCS7-231
– UL TFCS			RCS7-232
– TFC subset	Default value is the complete existing set of transport format combinations		RCS7-233
– Allowed Transport Format combination	0 to MaxTFCvalue-1 (MaxTFCValue is refer to clause 6 Parameter Set.)		RCS7-234
– PRACH TFCS	(This IE is repeated for TFC number.)		RCS7-235
– CHOICE TFCI signalling	Normal		RCS7-236
– TFCI Field 1 information			RCS7-237
– TFCS complete reconfigure information			RCS7-238
– CHOICE TFCS Size	Number of used bits must be enough to cover all combinations of CTFC from clauses 6. Refer to clause 6 Parameter Set		RCS7-239
– CTFC information	Not Present		RCS7-240
– CHOICE mode	TDD		RCS7-241
– Individual UL CCTrCH information	Not Present		RCS7-242
Deleted TrCH information list	Not Present		RCS7-243
Added or Reconfigured UL TrCH information list	1		RCS7-244
– Added or Reconfigured UL TrCH information			RCS7-245
– Uplink transport channel type	DCH		RCS7-246
– UL Transport channel identity	5		RCS7-247
– TFS			RCS7-248
– CHOICE Transport channel type	Dedicated transport channels		RCS7-249
– Dynamic Transport Format Information			RCS7-250
– RLC size	According to clause 6		RCS7-251
– Number of TBs and TTI List	(This IE is repeated for TFI number)		RCS7-252
– CHOICE mode	TDD		RCS7-253
– Transmission Time Interval	According to clause 6		RCS7-254
– CHOICE Logical channel list	All		RCS7-255
– Semi-static Transport Format information			RCS7-256
DL Transport channel information common for all transport channel			RCS7-257
– SCCPCH TFCS	Not Present		RCS7-258
– CHOICE mode	TDD		RCS7-259
– CHOICE DL parameters	Same as UL		RCS7-260
Added or Reconfigured DL TrCH information list	1		RCS7-261
– Added or Reconfigured DL TrCH information			RCS7-262
– Downlink transport channel type	DCH		RCS7-263
– DL Transport channel identity	10		RCS7-264
– CHOICE DL parameters	Same as UL		RCS7-265
– Uplink transport channel type	DCH		RCS7-266
– UL TrCH Identity	5		RCS7-267
– DCH quality target			RCS7-268
– BLER Quality value	Reference to the present document		RCS7-269
Frequency info	Not Present		RCS7-270
DTX-DRX timing information	Not Present	Rel-7	RCS7-271
DTX-DRX information	Not Present	Rel-7	RCS7-272
HS-SCCH less information	Not Present	Rel-7	RCS7-273
MIMO parameters	Not Present	Rel-7	RCS7-274
Maximum allowed UL TX power	Not Present		RCS7-275
Uplink DPCH info		Rel-6	RCS7-276
– Uplink DPCH power control info			RCS7-277
– CHOICE mode	TDD		RCS7-278
– CHOICE TDD option	7.68 Mcps	Rel-7	RCS7-279
– UL target SIR	Reference to clause 6 Parameter set		RCS7-280
– CHOICE mode	TDD		RCS7-281
– CHOICE UL OL PC info	Individually signalled		RCS7-282
– CHOICE TDD option	7.68 Mcps	Rel-7	RCS7-283
– Individual timeslot interference info	Not Present		RCS7-284
– Individual timeslot interference			RCS7-285
– DPCH Constant Value			RCS7-286
– Primary CCPCH Tx Power	Not Present		RCS7-287
– Time info			RCS7-288
– Activation time	(256+CFN-(CFN MOD 8 + 8))MOD 256		RCS7-289
– Duration	Infinite		RCS7-290
– Common timeslot info			RCS7-291
– 2nd interleaving mode	Reference to clause 6.11 Parameter Set		RCS7-292
– TFCI coding	Reference to clause 6.11 Parameter Set		RCS7-293
– Puncturing Limit	Reference to clause 6.11 Parameter Set		RCS7-294
– Repetition Period	Reference to clause 6.11 Parameter Set		RCS7-295
– Repetition Length	Reference to clause 6.11 Parameter Set		RCS7-296
– CHOICE TDD Option	7.68 Mcps	Rel-7	RCS7-297
– Uplink DPCH timeslots and codes VHCR	Default is to use the old timeslots and codes	Rel-7	RCS7-298
– CPCH SET Info	(no data)	R99 and Rel-4 only	RCS7-299
Downlink information common for all radio links			RCS7-300
– Downlink DPCH info common for all RL			RCS7-301
– Timing Indication	Initialize		RCS7-302
– CFN-targetSFN frame offset	Not Present		RCS7-303
– Downlink DPCH power control information			RCS7-304
– DPC mode	0 (single)		RCS7-305
– CHOICE mode	TDD		RCS7-306
– CHOICE TDD option	7.68 Mcps (no data)	Rel-7	RCS7-307
– Default DPCH Offset Value	Not Present		RCS7-308
Downlink information for per radio links list			RCS7-309
-Downlink information for each radio links			RCS7-310
– CHOICE mode	TDD		RCS7-311
– Primary CCPCH info			RCS7-312
– CHOICE mode	TDD		RCS7-313
– CHOICE TDD option	7.68 Mcps	Rel-7	RCS7-314
– CHOICE SyncCase	Sync Case 1		RCS7-315
– Timeslot	PCCPCH timeslot		RCS7-316
– Cell parameters ID	0		RCS7-317
– SCTD indicator			RCS7-318
– CHOICE DPCH info	Downlink DPCH info for each RL	Rel-6	RCS7-319
– Downlink DPCH info for each RL			RCS7-320
– CHOICE mode	TDD		RCS7-321
– DL CCTrCH List			RCS7-322
– TFCS ID	1		RCS7-323
– Time info			RCS7-324
– Activation time	(256+CFN-(CFN mod 8 + 8))mod 256		RCS7-325
– Duration	infinite		RCS7-326
– Common timeslot info			RCS7-327
– 2nd interleaving mode	Reference to the present document		RCS7-328
– TFCI coding	TRUE		RCS7-329
– Puncturing limit	Reference to clause 6 Parameter set		RCS7-330
– Repetition period	1		RCS7-331
– Repetition length	Empty		RCS7-332
– Downlink DPCH timeslots and codes VHCR		Rel-7	RCS7-333
– CHOICE more timeslots			RCS7-334
– CHOICE TDD option	7.68 Mcps	Rel-7	RCS7-335
– Timeslot number	The number of a downlink timeslot that has unassigned codes in a frame.		RCS7-336
– Individual timeslot info			RCS7-337
– TFCI existence	TRUE		RCS7-338
– Midamble shift and burst type			RCS7-339
– CHOICE TDD option	7.68 Mcps		RCS7-340
-CHOICE Burst Type			RCS7-341
-Type 1			RCS7-342
-Midamble Allocation Mode	Default		RCS7-343
– Midamble configuration burst type 1 and 3	As defined in 3GPP TS 25.221 [28]		RCS7-344
– First timeslot channelisation codes			RCS7-345
– First channelisation code	(i/SF) where i is the lowest numbered code that is being assigned and SF is specified in clause 6 Parameter Set..		RCS7-346
– Last channelisation code	(j/SF) where j is the highest numbered code that is being assigned in the slot.		RCS7-347
– CHOICE more timeslots	The presence of this IE depends upon whether the requirements of clause 6 Parameter Set could be met by the codes that have been assigned in the first timeslot.		RCS7-348
– UL CCTrCH TPC List	Not Present		RCS7-349
-SCCPCH information for FACH	Not Present	R99 and Rel-4 only	RCS7-350

Contents of SECURITY MODE COMMAND message: AM

Information Element	Condition	Value/remark
Message Type	A1, A2
RRC transaction identifier		Arbitrarily selects an integer between 0 and 3
Integrity check info
– Message authentication code		Set to an arbitrarily selected 32-bits integer. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.
– RRC Message Sequence Number		Set to an arbitrarily selected integer between 0 and 15
Security capability
– Ciphering algorithm capability
– UEA0		If the UE has indicated support for ciphering algorithm UEA0 in the IE "security capability" in the RRC CONNECTION SETUP COMPLETE message, this IE is set to TRUE.
– UEA1		If the UE has indicated support for ciphering algorithm UEA1 in the IE "security capability" in the RRC CONNECTION SETUP COMPLETE message, this IE is set to TRUE.
– Spare		Spare 2-15 = FALSE
– Integrity protection algorithm capability		0000000000000010B (UIA1)
– UIA1		TRUE
– Spare		Spare 0 and Spare 2-15 = FALSE
Ciphering mode info		This presence of this IE is dependent on IXIT statements in TS 34.123-2. If ciphering is indicated to be active, this IE present with the values of the sub IEs as stated below. Else, this IE is omitted.
– Ciphering mode command		Start/restart
– Ciphering algorithm		UEA0 or UEA1. The indicated algorithm must be one of the algorithms supported by the UE as indicated in the IE "security capability" in the RRC CONNECTION SETUP COMPLETE message. Use the same ciphering algorithm specified in "ciphering
– Ciphering activation time for DPCH		Not Present
– Radio bearer downlink ciphering activation time info
– Radio bearer activation time
– RB identity		1
– RLC sequence number		Current RLC SN
– RB identity		2
– RLC sequence number		Current RLC SN+3(or Calculated Value)
– RB identity		3
– RLC sequence number		Current RLC SN
– RB identity		4
– RLC sequence number		Current RLC SN
Integrity protection mode info
– Integrity protection mode command		Start
– Downlink integrity protection activation info		Not Present
– Integrity protection algorithm		UIA1
– Integrity protection initialisation number		SS selects an arbitrary 32 bits number for FRESH
CN domain identity		CS or PS
UE system specific security capability	A1	Not Checked
UE system specific security capability	A2
– Inter-RAT UE security capability
– CHOICE system		GSM
– GSM security capability		The indicated algorithms must be the same as the algorithms supported by the UE as indicated in the IE " UE system specific capability " in the RRC CONNECTION SETUP COMPLETE message.

Condition	Explanation
A1	UE not supporting GSM
A2	UE supporting GSM