9.2.1 Default Message Contents for RF (FDD)

34.1083GPPCommon test environments for User Equipment (UE)Conformance testingRelease 15TS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

Contents of Activate RB Test Mode message

Information Element	Value/remark
Protocol discriminator	F (Length 1/2)
Skip indicator	0 (Length 1/2)
Message Type	44h

Contents of Close UE Test Loop message (UE test loop mode 1 without Dummy DCCH transmission)

Information Element	Value/remark
Protocol discriminator	F (Length 1/2)
Skip indicator	0 (Length 1/2)
Message Type	40h
UE test loop mode	00h
UE test loop mode 1 LB setup	03h 00h F4h 0Ah

Contents of Close UE Test Loop message (UE test loop mode 2 without Dummy DCCH transmission)

Information Element	Value/remark
Protocol discriminator	F (Length 1/2)
Skip indicator	0 (Length 1/2)
Message Type	40h
UE test loop mode	01h

Contents of Open UE Test Loop message

Information Element	Value/remark
Protocol discriminator	F (Length 1/2)
Skip indicator	0 (Length 1/2)
Message Type	42h

Contents of MBMS COMMON P-T-M RB INFORMATION message: UM

Information Element	Value/remark	Version
Message type		Rel-6
RB information list	One entry in the list	Rel-6
– RB identity	14	Rel-6
– PDCP info
– Support for lossless SRNS relocation	Not Present
– PDCP PDU header	Absent
– Header compression information	Not Present
– RLC info
– DL UM RLC LI size	Selected with DL UM RLC data size
– DL Duplication Avoidance and Reordering info	Not Present
TrCh information for each TrCh	One entry in the list	Rel-6
– Transport channel identity	17	Rel-6
– TFS
– CHOICE Transport channel type	Common transport channels
– Dynamic Transport format information
– RLC Size	Reference to TS34.121 [2] Annex C.12 DL reference parameters or as specified within test case in TS34.121 [2].
– Number of TBs List	(This IE is repeated for TFI number.)
– Transmission Time Interval	Not Present
– Number of Transport blocks	Reference to TS34.121 [2] Annex C.12 DL reference parameters or as specified within test case in TS34.121 [2].
– CHOICE Logical channel list	All
– Semi-static Transport Format information
– Transmission time interval	Reference to TS34.121 [2] Annex C.12 DL reference parameters or as specified within test case in TS34.121 [2].
– Type of channel coding	Reference to TS34.121 [2] Annex C.12 DL reference parameters or as specified within test case in TS34.121 [2].
– Coding Rate	Reference to TS34.121 [2] Annex C.12 DL reference parameters or as specified within test case in TS34.121 [2].
– Rate matching attribute	Reference to TS34.121 [2] Annex C.12 DL reference parameters or as specified within test case in TS34.121 [2]
– CRC size	Reference to TS34.121 [2] Annex C.12 DL reference parameters or as specified within test case in TS34.121 [2].
TrCh information for each CCTrCh	One entry in the list	Rel-6
– CCTrCH identity	1	Rel-6
– TFCS
– CHOICE TFCI signalling	Normal
– TFCI Field 1 information
– CHOICE TFCS representation	Complete reconfiguration
– TFCS complete reconfiguration information
– CHOICE CTFC Size	Number of bits used must be enough to cover all combinations of CTFC from TS34.121 [2] Annex C.12 parameter set or as specified within test case in TS34.121 [2].
– CTFC information	This IE is repeated for number of CTFCs from TS34.121 [2] Annex C.12 parameter set or as specified within test case in TS34.121 [2].
– CTFC	Reference to TS34.121 [2] Annex C.12 parameter set or as specified within test case in TS34.121 [2].
– Power offset information	Not Present
PhyCh information	One entry in list	Rel-6
– PhyCh identity	13	Rel-6
– Secondary CCPCH info MBMS
– CHOICE mode	FDD
– Secondary scrambling code	Not Present
– STTD indicator	FALSE
– Spreading factor	Reference to TS34.121 [2] Annex C.12 DL reference parameters.
– Code number	Reference to TS34.121 [2] Annex E.6.4 “Downlink physical channels code allocation for MBMS test cases”
– Timing Offset	Not Present Absence of this IE is equivalent to default value 0.

Contents of PAGING TYPE 1 message: TM (CS)

Information Element	Value/remark
Message Type
Paging record list
-Paging record
– CHOICE Used paging identity	CN identity
– Paging cause	Terminating Streaming Call
– CN domain identity	CS domain
– CHOICE UE identity
– IMSI (GSM-MAP)	Set to the same octet string as in the IMSI stored in the USIM card
BCCH modification info	Not Present

Contents of PAGING TYPE 1 message: TM (PS)

Information Element	Value/remark
Message Type
Paging record list
-Paging record
– CHOICE Used paging identity	CN identity
– Paging cause	Terminating Interactive Call
– CN domain identity	PS domain
– CHOICE UE identity
– IMSI (GSM-MAP)	Set to the same octet string as in the IMSI stored in the USIM card
BCCH modification info	Not Present

Contents of PAGING TYPE 2 message: TM (PS)

Information Element	Value/remark
Message Type
RRC transaction identifier	Arbitrarily selects one integer between 0 to 3
Integrity check info
– message authentication code	SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.
– RRC message sequence number	SS provides the value of this IE, from its internal counter.
– Paging cause	Terminating Interactive Call
– CN domain identity	PS domain
– Paging record type identifier	TMSI(GSM-MAP)/P-TMSI

Contents of RADIO BEARER SETUP message: AM or UM (Test Loop Mode1)

Information Element	Condition	Value/remark	Version	Index
Message Type	A1, A3, A4, A5, A6, A7, A8, A9			RBST-001
RRC transaction identifier		Arbitrarily selects an integer between 0 and 3		RBST-002
Integrity check info				RBST-003
– message authentication code		SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.		RBST-004
– RRC message sequence number		SS provides the value of this IE, from its internal counter.		RBST-005
Integrity protection mode info		Not Present		RBST-006
Ciphering mode info		Not Present		RBST-007
Activation time		(256+CFN-(CFN MOD 8 + 8))MOD 256		RBST-008
New U-RNTI		Not Present		RBST-009
New C-RNTI		Not Present		RBST-010
New DSCH-RNTI		Not Present	R99 and Rel-4 only	RBST-011
New H-RNTI		Not Present	Rel-5	RBST-012
New Primary E-RNTI		Not Present	Rel-6	RBST-013
New Secondary E-RNTI		Not Present	Rel-6	RBST-014
RRC State indicator		CELL_DCH		RBST-015
UTRAN DRX cycle length coefficient		Not Present		RBST-016
CN information info		Not Present		RBST-017
URA identity		Not Present		RBST-018
CHOICE specification mode		Complete specification	Rel-6	RBST-019
– Signalling RB information to setup		Not Present		RBST-020
– RAB information for setup list	A1, A3, A4, A5			RBST-021
– RAB information for setup				RBST-022
– RAB info				RBST-023
– RAB identity		0000 0001B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBST-024
– CN domain identity		CS domain		RBST-025
– NAS Synchronization Indicator		Not Present		RBST-026
– Re-establishment timer		UseT314		RBST-027
				RBST-028
– RB information to setup list				RBST-029
– RB information to setup				RBST-030
– RAB information for setup list	A6, A7, A8, A9			RBST-031
– RAB information for setup				RBST-032
– RAB info				RBST-033
– RAB identity		0000 0101B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBST-034
– CN domain identity		PS domain		RBST-035
– NAS Synchronization Indicator		Not Present		RBST-036
– Re-establishment timer		UseT315		RBST-037
				RBST-038
– RB information to setup list				RBST-039
– RB information to setup				RBST-040
– RB identity	A1	10		RBST-041
– PDCP info		Not Present		RBST-042
– CHOICE RLC info type		RLC info		RBST-043
– CHOICE Uplink RLC mode		TM RLC		RBST-044
– Transmission RLC discard		Not Present		RBST-045
– Segmentation indication		FALSE		RBST-046
– CHOICE Downlink RLC mode		TM RLC		RBST-047
– Segmentation indication		FALSE		RBST-048
– One sided RLC re-establishment		FALSE	Rel-5	RBST-049
– RB mapping info				RBST-050
– Information for each multiplexing option				RBST-051
– RLC logical channel mapping indicator		Not Present		RBST-052
– Number of uplink RLC logical channels		1		RBST-053
– Uplink transport channel type		DCH		RBST-054
– UL Transport channel identity		1		RBST-055
– Logical channel identity		Not Present		RBST-056
– CHOICE RLC size list		Configured		RBST-057
– MAC logical channel priority		7		RBST-058
– Downlink RLC logical channel info				RBST-059
– Number of downlink RLC logical channels		1		RBST-060
– Downlink transport channel type		DCH		RBST-061
– DL DCH Transport channel identity		6		RBST-062
– DL DSCH Transport channel identity		Not Present		RBST-063
– Logical channel identity		Not Present		RBST-064
– RB identity	A3, A4, A5	10		RBST-065
– PDCP info		Not Present		RBST-066
– CHOICE RLC info type		RLC info		RBST-067
– CHOICE Uplink RLC mode		AM RLC		RBST-068
– Transmission RLC discard				RBST-069
– CHOICE SDU discard mode		No Discard		RBST-070
– MAX_DAT		15		RBST-071
– Transmission window size		Selected with Total RLC AM Buffer Size		RBST-072
– Timer_RST		500		RBST-073
– Max_RST		4		RBST-074
– Polling info				RBST-075
– Timer_poll_prohibit		400		RBST-076
– Timer_poll		400		RBST-077
– Poll_PDU		Not Present		RBST-078
– Poll_SDU		1		RBST-079
– Last transmission PDU poll		TRUE		RBST-080
– Last retransmission PDU poll		TRUE		RBST-081
– Poll_Windows		99		RBST-082
– Timer_poll_periodic		Not Present		RBST-083
– CHOICE Downlink RLC mode		AM RLC		RBST-084
– DL RLC PDU size	A3	1280 bits	Rel-5	RBST-085
– DL RLC PDU size	A4	2880 bits	Rel-5	RBST-086
– DL RLC PDU size	A5	3840 bits	Rel-5	RBST-087
– In-sequence delivery	A3, A4, A5	TRUE		RBST-088
– Receiving window size		Selected with Total RLC AM Buffer Size		RBST-089
– Downlink RLC status info				RBST-090
– Timer_status_prohibit		330		RBST-091
– Timer_EPC		Not Present		RBST-092
– Missing PDU indicator		TRUE		RBST-093
– Timer_STATUS_periodic		Not Present		RBST-094
– One sided RLC re-establishment		FALSE	Rel-5	RBST-095
– RB mapping info				RBST-096
– Information for each multiplexing option				RBST-097
– RLC logical channel mapping indicator		Not Present		RBST-098
– Number of uplink RLC logical channels		1		RBST-099
– Uplink transport channel type		DCH		RBST-100
– UL Transport channel identity		1		RBST-101
– Logical channel identity		Not Present		RBST-102
– CHOICE RLC size list		Configured		RBST-103
– MAC logical channel priority		7		RBST-104
– Downlink RLC logical channel info				RBST-105
– Number of downlink RLC logical channels		1		RBST-106
– Downlink transport channel type		DCH		RBST-107
– DL DCH Transport channel identity		6		RBST-108
– DL DSCH Transport channel identity		Not Present		RBST-109
– Logical channel identity		Not Present		RBST-110
– RB identity	A6, A7, A8, A9	20		RBST-111
– PDCP info		Not present		RBST-112
– CHOICE RLC info type		RLC info		RBST-113
– CHOICE Uplink RLC mode		AM RLC		RBST-114
– Transmission RLC discard				RBST-115
– CHOICE SDU discard mode		No Discard		RBST-116
– MAX_DAT		15		RBST-117
– Transmission window size		Selected with Total RLC AM Buffer Size		RBST-118
– Timer_RST		500		RBST-119
– Max_RST		4		RBST-120
– Polling info				RBST-121
– Timer_poll_prohibit		400		RBST-122
– Timer_poll		400		RBST-123
– Poll_PDU		Not Present		RBST-124
– Poll_SDU		1		RBST-125
– Last transmission PDU poll		TRUE		RBST-126
– Last retransmission PDU poll		TRUE		RBST-127
– Poll_Windows		99		RBST-128
– Timer_poll_periodic		Not Present		RBST-129
– CHOICE Downlink RLC mode		AM RLC		RBST-130
– DL RLC PDU size	A6	1280 bits	Rel-5	RBST-131
– DL RLC PDU size	A7	2880 bits	Rel-5	RBST-132
– DL RLC PDU size	A8	3840 bits	Rel-5	RBST-133
– DL RLC PDU size	A9	336 bits	Rel-5	RBST-134
– In-sequence delivery	A6, A7, A8, A9	TRUE		RBST-135
– Receiving window size		Selected with Total RLC AM Buffer Size		RBST-136
– Downlink RLC status info				RBST-137
– Timer_status_prohibit		330		RBST-138
– Timer_EPC		Not Present		RBST-139
– Missing PDU indicator		TRUE		RBST-140
– Timer_STATUS_periodic		Not Present		RBST-141
– One sided RLC re-establishment		FALSE	Rel-5	RBST-142
– RB mapping info				RBST-143
– Information for each multiplexing option		2 RBMuxOptions		RBST-144
– RLC logical channel mapping indicator		Not Present		RBST-145
– Number of uplink RLC logical channels		1		RBST-146
– Uplink transport channel type		DCH		RBST-147
– UL Transport channel identity		1		RBST-148
– Logical channel identity		Not Present		RBST-149
– CHOICE RLC size list		Configured		RBST-150
– MAC logical channel priority		8		RBST-151
– Downlink RLC logical channel info				RBST-152
– Number of downlink RLC logical channels		1		RBST-153
– Downlink transport channel type		DCH		RBST-154
– DL DCH Transport channel identity		6		RBST-155
– DL DSCH Transport channel identity		Not Present		RBST-156
– Logical channel identity		Not Present		RBST-157
– RLC logical channel mapping indicator		Not Present		RBST-158
– Number of uplink RLC logical channels		1		RBST-159
– Uplink transport channel type		RACH		RBST-160
– UL Transport channel identity		Not Present		RBST-161
– Logical channel identity		7		RBST-162
– CHOICE RLC size list		Explicit list		RBST-163
– RLC size index		Reference to clause 6 Parameter Set		RBST-164
– MAC logical channel priority		8		RBST-165
– Downlink RLC logical channel info				RBST-166
– Number of downlink RLC logical channels		1		RBST-167
– Downlink transport channel type		FACH		RBST-168
– DL DCH Transport channel identity		Not Present		RBST-169
– DL DSCH Transport channel identity		Not Present		RBST-170
– Logical channel identity		7		RBST-171
RB information to reconfigure list	A1, A3, A4, A5, A6, A7, A8, A9	Not Present	Rel-6	RBST-172
RB information to be affected list		Not Present		RBST-173
Downlink counter synchronization info		Not Present		RBST-174
PDCP ROHC target mode		Not Present	Rel-5	RBST-175
UL Transport channel information for all transport channels				RBST-176
– PRACH TFCS		Not Present		RBST-177
– CHOICE mode		FDD		RBST-178
– TFC subset		Not Present		RBST-179
– UL DCH TFCS				RBST-180
– CHOICE TFCI signalling		Normal		RBST-181
– TFCI Field 1 information				RBST-182
– CHOICE TFCS representation		Complete reconfiguration		RBST-183
– TFCS complete reconfigure information				RBST-184
– CHOICE CTFC Size		2 bit CTFC		RBST-185
– CTFC information		4 TFCs		RBST-186
– 2bit CTFC		0		RBST-187
-Power offset Information				RBST-188
– CHOICE Gain Factors		Computed Gain Factors		RBST-189
– Reference TFC ID		0		RBST-190
– CHOICE mode		FDD		RBST-191
– Power offset Pp-m		Not Present		RBST-192
– 2bit CTFC		2		RBST-193
– Power offset Information				RBST-194
– CHOICE Gain Factors		Computed Gain Factors		RBST-195
– Reference TFC ID		0		RBST-196
– CHOICE mode		FDD		RBST-197
– Power offset Pp-m		Not Present		RBST-198
– 2bit CTFC		1		RBST-199
– Power offset Information				RBST-200
– CHOICE Gain Factors		Computed Gain Factors		RBST-201
– Reference TFC ID		0		RBST-202
– CHOICE mode		FDD		RBST-203
– Power offset Pp-m		Not Present		RBST-204
– 2bit CTFC		3		RBST-205
– Power offset Information				RBST-206
– CHOICE Gain Factors		Signalled Gain Factors		RBST-207
– CHOICE mode		FDD		RBST-208
– Gain factor ßc		8		RBST-209
– Gain factor ßd		15		RBST-210
– Reference TFC ID		0		RBST-211
– CHOICE mode		FDD		RBST-212
– Power offset Pp-m		Not Present		RBST-213
Deleted UL TrCH information list		Not Present		RBST-214
Added or Reconfigured TrCH information list	A1	1		RBST-215
– Added or Reconfigured UL TrCH information				RBST-216
– Uplink transport channel type		DCH		RBST-217
– UL Transport channel identity		1		RBST-218
– TFS				RBST-219
– CHOICE Transport channel type		Dedicated transport channels		RBST-220
– Dynamic Transport Format Information				RBST-221
– RLC size		244 bits		RBST-222
– Number of TBs and TTI List		2		RBST-223
– Transmission Time Interval		Not Present		RBST-224
– Number of Transport blocks		0		RBST-225
– Transmission Time Interval		Not Present		RBST-226
– Number of Transport blocks		1		RBST-227
– CHOICE Logical channel List		ALL		RBST-228
– Semi-static Transport Format Information				RBST-229
– Transmission time interval		20		RBST-230
– Type of channel coding		Convolutional		RBST-231
– Coding Rate		1/3		RBST-232
– Rate matching attribute		256		RBST-233
– CRC size		16		RBST-234
Added or Reconfigured TrCH information list	A3, A4, A5, A6, A7, A8, A9	1		RBST-235
– Added or Reconfigured UL TrCH information				RBST-236
– Uplink transport channel type		DCH		RBST-237
– UL Transport channel identity		1		RBST-238
– TFS				RBST-239
– CHOICE Transport channel type		Dedicated transport channels		RBST-240
– Dynamic Transport Format Information				RBST-241
– RLC size		240 bits		RBST-242
– Number of TBs and TTI List		2		RBST-243
– Transmission Time Interval		Not Present		RBST-244
– Number of Transport blocks		0		RBST-245
– Transmission Time Interval		Not Present		RBST-246
– Number of Transport blocks		1		RBST-247
– CHOICE Logical channel List		ALL		RBST-248
– Semi-static Transport Format Information				RBST-249
– Transmission time interval		20		RBST-250
– Type of channel coding		Convolutional		RBST-251
– Coding Rate		1/3		RBST-252
– Rate matching attribute		256		RBST-253
– CRC size		16		RBST-254
CHOICE mode	A1, A3, A4, A5, A6, A7, A8	Not Present		RBST-255
DL Transport channel information common for all transport channel				RBST-256
– SCCPCH TFCS		Not Present		RBST-257
– CHOICE mode		FDD		RBST-258
– CHOICE DL parameters		Same as UL		RBST-259
Deleted DL TrCH information list		Not Present		RBST-260
CHOICE mode	A9	Not Present		RBST-261
DL Transport channel information common for all transport channel				RBST-262
– SCCPCH TFCS		Not Present		RBST-263
– CHOICE mode		FDD		RBST-264
– CHOICE DL parameters		DL DCH TFCS		RBST-265
– DL DCH TFCS				RBST-266
– CHOICE TFCI signalling		Normal		RBST-267
– TFCI Field 1 information				RBST-268
– CHOICE TFCS representation		Complete reconfiguration		RBST-269
– TFCS complete reconfigure information				RBST-270
– CHOICE CTFC Size		4 bit CTFC		RBST-271
– CTFC information		6 TFCs		RBST-272
– 4bit CTFC		0		RBST-273
– Power offset Information				RBST-274
– CHOICE Gain Factors		Computed Gain Factors		RBST-275
– Reference TFC ID		0		RBST-276
– CHOICE mode		FDD		RBST-277
– Power offset Pp-m		Not Present		RBST-278
– 4bit CTFC		3		RBST-279
– Power offset Information				RBST-280
– CHOICE Gain Factors		Computed Gain Factors		RBST-281
– Reference TFC ID		0		RBST-282
– CHOICE mode		FDD		RBST-283
– Power offset Pp-m		Not Present		RBST-284
– 4bit CTFC		1		RBST-285
– Power offset Information				RBST-286
– CHOICE Gain Factors		Computed Gain Factors		RBST-287
– Reference TFC ID		0		RBST-288
– CHOICE mode		FDD		RBST-289
– Power offset Pp-m		Not Present		RBST-290
– 4bit CTFC		4		RBST-291
– Power offset Information				RBST-292
– CHOICE Gain Factors		Computed Gain Factors		RBST-293
– Reference TFC ID		0		RBST-294
– CHOICE mode		FDD		RBST-295
– Power offset Pp-m		Not Present		RBST-296
– 4bit CTFC		2		RBST-297
– Power offset Information				RBST-298
– CHOICE Gain Factors		Computed Gain Factors		RBST-299
– Reference TFC ID		0		RBST-300
– CHOICE mode		FDD		RBST-301
– Power offset Pp-m		Not Present		RBST-302
– 4bit CTFC		5		RBST-303
– Power offset Information				RBST-304
– CHOICE Gain Factors		Signalled Gain Factors		RBST-305
– CHOICE mode		FDD		RBST-306
– Gain factor ßc		8		RBST-307
– Gain factor ßd		15		RBST-308
– Reference TFC ID		0		RBST-309
– CHOICE mode		FDD		RBST-310
– Power offset Pp-m		Not Present		RBST-311
Deleted DL TrCH information list		Not Present		RBST-312
Added or Reconfigured TrCH information list	A1	1		RBST-313
– Added or Reconfigured DL TrCH information				RBST-314
– Downlink transport channel type		DCH		RBST-315
– DL Transport channel identity		6		RBST-316
– CHOICE DL parameters		Same as UL		RBST-317
– Uplink transport channel type		DCH		RBST-318
– UL TrCH identity		1		RBST-319
– DCH quality target				RBST-320
– BLER Quality value		-20 (-2.0)		RBST-321
Added or Reconfigured TrCH information list	A3, A6	1		RBST-322
– Added or Reconfigured DL TrCH information				RBST-323
– Downlink transport channel type		DCH		RBST-324
– DL Transport channel identity		6		RBST-325
– CHOICE DL parameters		Explicit		RBST-326
– TFS				RBST-327
– CHOICE Transport channel type		Dedicated transport channels		RBST-328
– Dynamic transport format information				RBST-329
– RLC Size		1280 bits		RBST-330
– Number of TBs and TTI List		2		RBST-331
– Transmission Time Interval		Not Present		RBST-332
– Number of Transport blocks		0		RBST-333
– Transmission Time Interval		Not Present		RBST-334
– Number of Transport blocks		1		RBST-335
– CHOICE Logical channel list		ALL		RBST-336
– Semi-static Transport Format information				RBST-337
– Transmission time interval		20		RBST-338
– Type of channel coding		Turbo		RBST-339
– Rate matching attribute		256		RBST-340
– CRC size		16		RBST-341
– DCH quality target				RBST-342
– BLER Quality value		-20 (-2.0)		RBST-343
Added or Reconfigured TrCH information list	A4, A7	1		RBST-344
– Added or Reconfigured DL TrCH information				RBST-345
– Downlink transport channel type		DCH		RBST-346
– DL Transport channel identity		6		RBST-347
– CHOICE DL parameters		Explicit		RBST-348
– TFS				RBST-349
– CHOICE Transport channel type		Dedicated transport channels		RBST-350
– Dynamic transport format information				RBST-351
– RLC Size		2880 bits		RBST-352
– Number of TBs and TTI List		2		RBST-353
– Transmission Time Interval		Not Present		RBST-354
– Number of Transport blocks		0		RBST-355
– Transmission Time Interval		Not Present		RBST-356
– Number of Transport blocks		1		RBST-357
– CHOICE Logical channel list		ALL		RBST-358
– Semi-static Transport Format information				RBST-359
– Transmission time interval		20		RBST-360
– Type of channel coding		Turbo		RBST-361
– Rate matching attribute		256		RBST-362
– CRC size		16		RBST-363
– DCH quality target				RBST-364
– BLER Quality value		-20 (-2.0)		RBST-365
Added or Reconfigured TrCH information list	A5, A8	1		RBST-366
– Added or Reconfigured DL TrCH information				RBST-367
– Downlink transport channel type		DCH		RBST-368
– DL Transport channel identity		6		RBST-369
– CHOICE DL parameters		Explicit		RBST-370
– TFS				RBST-371
– CHOICE Transport channel type		Dedicated transport channels		RBST-372
– Dynamic transport format information				RBST-373
– RLC Size		3840 bits		RBST-374
– Number of TBs and TTI List		2		RBST-375
– Transmission Time Interval		Not Present		RBST-376
– Number of Transport blocks		0		RBST-377
– Transmission Time Interval		Not Present		RBST-378
– Number of Transport blocks		1		RBST-379
– CHOICE Logical channel list		ALL		RBST-380
– Semi-static Transport Format information				RBST-381
– Transmission time interval		10		RBST-382
– Type of channel coding		Turbo		RBST-383
– Rate matching attribute		256		RBST-384
– CRC size		16		RBST-385
– DCH quality target				RBST-386
– BLER Quality value		-20 (-2.0)		RBST-387
Added or Reconfigured TrCH information list	A9	1		RBST-388
– Added or Reconfigured DL TrCH information				RBST-389
– Downlink transport channel type		DCH		RBST-390
– DL Transport channel identity		6		RBST-391
– CHOICE DL parameters		Explicit		RBST-392
– TFS				RBST-393
– CHOICE Transport channel type		Dedicated transport channels		RBST-394
– Dynamic transport format information				RBST-395
– RLC Size		336 bits		RBST-396
– Number of TBs and TTI List		3		RBST-397
– Transmission Time Interval		Not Present		RBST-398
– Number of Transport blocks		0		RBST-399
– Transmission Time Interval		Not Present		RBST-400
– Number of Transport blocks		1		RBST-401
– Transmission Time Interval		Not Present		RBST-402
– Number of Transport blocks		4		RBST-403
– CHOICE Logical channel list		ALL		RBST-404
– Semi-static Transport Format information				RBST-405
– Transmission time interval		20		RBST-406
– Type of channel coding		Turbo		RBST-407
– Rate matching attribute		143		RBST-408
– CRC size		16		RBST-409
– DCH quality target				RBST-410
– BLER Quality value		-20 (-2.0)		RBST-411
Frequency info	A1, A3, A4, A5, A6, A7, A8, A9	Not Present		RBST-412
Multi-frequency Info		Not Present	Rel-7	RBST-413
DTX-DRX timing information		Not Present	Rel-7	RBST-414
DRX Information		Not Present	Rel-7	RBST-415
HS-SCCH less Information		Not Present	Rel-7	RBST-416
MIMO parameters		Not Present	Rel-7	RBST-417
Maximum allowed UL TX power		33dBm		RBST-418
CHOICE channel requirement		Uplink DPCH info	Rel-5 and earlier	RBST-419
Uplink DPCH info			Rel-6	RBST-420
– Uplink DPCH power control info				RBST-421
– CHOICE mode		FDD		RBST-422
– DPCCH power offset		-40 (-80dB) IE value will have no effect on the UE UL power when closed loop power control is active		RBST-423
– PC Preamble		1 frame		RBST-424
– SRB delay		7 frames		RBST-425
– Power Control Algorithm		Algorithm1		RBST-426
– TPC step size		0 (1dB)		RBST-427
– ACK		Not Present	Rel-5	RBST-428
– NACK		Not Present	Rel-5	RBST-429
– Ack-Nack repetition factor		Not Present	Rel-5	RBST-430
– CHOICE mode		FDD		RBST-431
– Scrambling code type		Long		RBST-432
– Scrambling code number		0 (0 to 16777215)		RBST-433
– Number of DPDCH		1		RBST-434
– spreading factor	A1, A3, A4, A5, A6, A7, A8, A9	64		RBST-435
– TFCI existence	A1, A3, A4, A5, A6, A7, A8, A9	TRUE		RBST-436
– Number of FBI bit		Not Present(0)		RBST-437
– Puncturing Limit		1		RBST-438
CHOICE Mode		FDD	R99 and Rel-4 only	RBST-439
– Downlink PDSCH information		Not Present	R99 and Rel-4 only	RBST-440
E-DCH Info		Not Present	Rel-6	RBST-441
Downlink HS-PDSCH Information		Not Present	Rel-5	RBST-442
Downlink information common for all radio links				RBST-443
– Downlink DPCH info common for all RL				RBST-444
– Timing indicator		Maintain		RBST-445
– CFN-targetSFN frame offset		Not Present		RBST-446
– Downlink DPCH power control information				RBST-447
– CHOICE mode		FDD		RBST-448
– DPC mode		0 (single)		RBST-449
– CHOICE mode		FDD		RBST-450
– Power offset PPilot-DPDCH		0		RBST-451
– DL rate matching restriction information		Not Present		RBST-452
– Spreading factor	A1	128		RBST-453
– Fixed or Flexible Position		Fixed		RBST-454
– TFCI existence		TRUE		RBST-455
– CHOICE SF		128		RBST-456
– Number of bits for Pilot bits		8		RBST-457
– Spreading factor	A3, A6, A9	32		RBST-458
– Fixed or Flexible Position		Fixed		RBST-459
– TFCI existence		TRUE		RBST-460
– CHOICE SF		32		RBST-461
– Spreading factor	A4, A7	16		RBST-462
– Fixed or Flexible Position		Fixed		RBST-463
– TFCI existence		TRUE		RBST-464
– CHOICE SF		16		RBST-465
– Spreading factor	A5, A8	8		RBST-466
– Fixed or Flexible Position		Fixed		RBST-467
– TFCI existence		TRUE		RBST-468
– CHOICE SF		8		RBST-469
– CHOICE mode	A1, A3, A4, A5, A6, A7, A8, A9	FDD		RBST-470
– DPCH compressed mode info		Not Present		RBST-471
– TX Diversity mode		None		RBST-472
– SSDT information		Not Present	R99 and Rel-4 only	RBST-473
– Default DPCH Offset Value		Not Present		RBST-474
– MAC-hs reset indicator		Not Present	Rel-5	RBST-475
Downlink information per radio link list				RBST-476
– Downlink information for each radio link				RBST-477
– CHOICE mode		FDD		RBST-478
– Primary CPICH info				RBST-479
– Primary scrambling code		Reference to clause 6.1 "Default settings (FDD)"		RBST-480
– PDSCH with SHO DCH info		Not Present	R99 and Rel-4 only	RBST-481
– PDSCH code mapping		Not Present	R99 and Rel-4 only	RBST-482
– Serving HS-DSCH radio link indicator		FALSE	Rel-5	RBST-483
– Downlink DPCH info for each RL				RBST-484
– CHOICE mode		FDD		RBST-485
– Primary CPICH usage for channel estimation		Primary CPICH may be used		RBST-486
– DPCH frame offset		Set to value Default DPCH Offset Value (as currently stored in SS) mod 38 400		RBST-487
– Secondary CPICH info		Not Present		RBST-488
– DL channelisation code				RBST-489
– Secondary scrambling code		Not Present		RBST-490
– Spreading factor	A1	128		RBST-491
– Code number		96		RBST-492
– Spreading factor	A3, A6, A9	32		RBST-493
– Code number		24		RBST-494
– Spreading factor	A4, A7	16		RBST-495
– Code number		12		RBST-496
– Spreading factor	A5, A8	8		RBST-497
– Code number		6		RBST-498
– Scrambling code change	A1, A3, A4, A5, A6, A7, A8, A9	No change		RBST-499
– TPC combination index		0		RBST-500
– SSDT Cell Identity		Not Present	R99 and Rel-4 only	RBST-501
– Closed loop timing adjustment mode		Not Present		RBST-502
– SCCPCH information for FACH		Not Present	R99 and Rel-4 only	RBST-503
MBMS PL Service Restriction Information		Not Present	Rel-6	RBST-504

Condition	Explanation	Version
A1	This IE is needed for "UE supports CS RAB for Test Loop Mode1 RMC 12.2/12.2 (TM)"
A2	Not used
A3	This IE is needed for "UE supports CS RAB for Test Loop Mode1 AMC 12.2/64 (AM)"
A4	This IE is needed for "UE supports CS RAB for Test Loop Mode1 AMC 12.2/144 (AM)"
A5	This IE is needed for "UE supports CS RAB for Test Loop Mode1 AMC 12.2/384 (AM)"
A6	This IE is needed for "UE supports PS RAB for Test Loop Mode1 AMC 12.2/64 (AM)"
A7	This IE is needed for "UE supports PS RAB for Test Loop Mode1 AMC 12.2/144 (AM)"
A8	This IE is needed for "UE supports PS RAB for Test Loop Mode1 AMC 12.2/384 (AM)"
A9	This IE is needed for "UE supports PS RAB for Test Loop Mode1 AMC 12.2/64(Channel2) (AM)"

Contents of RADIO BEARER SETUP message: AM or UM (UE supports PS RAB only)

Information Element	Value/remark	Version	Index
Message Type			RBSP-001
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3		RBSP-002
Integrity check info			RBSP-003
– message authentication code	SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.		RBSP-004
– RRC message sequence number	SS provides the value of this IE, from its internal counter.		RBSP-005
Integrity protection mode info	Not Present		RBSP-006
Ciphering mode info	Not Present		RBSP-007
Activation time	(256+CFN-(CFN MOD 8 + 8))MOD 256		RBSP-008
New U-RNTI	Not Present		RBSP-009
New C-RNTI	Not Present		RBSP-010
New DSCH-RNTI	Not Present	R99 and Rel-4 only	RBSP-011
New H-RNTI	Not Present	Rel-5	RBSP-012
New Primary E-RNTI	Not Present	Rel-6	RBSP-013
New Secondary E-RNTI	Not Present	Rel-6	RBSP-014
RRC State indicator	CELL_DCH		RBSP-015
UTRAN DRX cycle length coefficient	Not Present		RBSP-016
CN information info	Not Present		RBSP-017
URA identity	Not Present		RBSP-018
CHOICE specification mode	Complete specification	Rel-6	RBSP-019
– Signalling RB information to setup	Not Present		RBSP-020
– RAB information for setup list			RBSP-021
– RAB information for setup			RBSP-022
– RAB info	(AM DTCH for PS domain)		RBSP-023
– RAB identity	0000 0101B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBSP-024
– CN domain identity	PS domain		RBSP-025
– NAS Synchronization Indicator	Not Present		RBSP-026
– Re-establishment timer	useT315		RBSP-027
– RB information to setup			RBSP-028
– RB identity	20		RBSP-029
– PDCP info			RBSP-030
– Support for lossless SRNS relocation	FALSE		RBSP-031
– Max PDCP SN window size	Not present		RBSP-032
– PDCP PDU header	Absent		RBSP-033
– Header compression information	Not present		RBSP-034
– CHOICE RLC info type	RLC info		RBSP-035
– CHOICE Uplink RLC mode	AM RLC		RBSP-036
– Transmission RLC discard			RBSP-037
– CHOICE SDU discard mode	No Discard		RBSP-038
– MAX_DAT	15		RBSP-039
– Transmission window size	128		RBSP-040
– Timer_RST	500		RBSP-041
– Max_RST	4		RBSP-042
– Polling info			RBSP-043
– Timer_poll_prohibit	200		RBSP-044
– Timer_poll	200		RBSP-045
– Poll_PDU	Not Present		RBSP-046
– Poll_SDU	1		RBSP-047
– Last transmission PDU poll	TRUE		RBSP-048
– Last retransmission PDU poll	TRUE		RBSP-049
– Poll_Windows	99		RBSP-050
– Timer_poll_periodic	Not Present		RBSP-051
– CHOICE Downlink RLC mode	AM RLC		RBSP-052
– DL RLC PDU size	Reference to clause 6 Parameter Set	Rel-5	RBSP-053
– In-sequence delivery	TRUE		RBSP-054
– Receiving window size	128		RBSP-055
– Downlink RLC status info			RBSP-056
– Timer_status_prohibit	200		RBSP-057
– Timer_EPC	Not Present		RBSP-058
– Missing PDU indicator	TRUE		RBSP-059
– Timer_STATUS_periodic	Not Present		RBSP-060
– RB mapping info			RBSP-061
– Information for each multiplexing option	2 RBMuxOptions		RBSP-062
– RLC logical channel mapping indicator	Not Present		RBSP-063
– Number of uplink RLC logical channels	1		RBSP-064
– Uplink transport channel type	DCH		RBSP-065
– UL Transport channel identity	1		RBSP-066
– Logical channel identity	Not Present		RBSP-067
– CHOICE RLC size list	Configured		RBSP-068
– MAC logical channel priority	8		RBSP-069
– Downlink RLC logical channel info			RBSP-070
– Number of downlink RLC logical channels	1		RBSP-071
– Downlink transport channel type	DCH		RBSP-072
– DL DCH Transport channel identity	6		RBSP-073
– DL DSCH Transport channel identity	Not Present		RBSP-074
– Logical channel identity	Not Present		RBSP-075
– RLC logical channel mapping indicator	Not Present		RBSP-076
– Number of uplink RLC logical channels	1		RBSP-077
– Uplink transport channel type	RACH		RBSP-078
– UL Transport channel identity	Not Present		RBSP-079
– Logical channel identity	7		RBSP-080
– CHOICE RLC size list	Explicit list		RBSP-081
– RLC size index	Reference to clause 6 Parameter Set		RBSP-082
– MAC logical channel priority	8		RBSP-083
– Downlink RLC logical channel info			RBSP-084
– Number of downlink RLC logical channels	1		RBSP-085
– Downlink transport channel type	FACH		RBSP-086
– DL DCH Transport channel identity	Not Present		RBSP-087
– DL DSCH Transport channel identity	Not Present		RBSP-088
– Logical channel identity	7		RBSP-089
RB information to reconfigure list	Not Present	Rel-6	RBSP-090
RB information to be affected list	Not Present		RBSP-091
Downlink counter synchronization info	Not Present		RBSP-092
UL Transport channel information for all transport channels			RBSP-093
– PRACH TFCS	Not Present		RBSP-094
– CHOICE mode	FDD		RBSP-095
– TFC subset	Not Present		RBSP-096
– UL DCH TFCS			RBSP-097
– CHOICE TFCI signalling	Normal		RBSP-098
– TFCI Field 1 information			RBSP-099
– CHOICE TFCS representation	Complete reconfiguration		RBSP-100
– TFCS complete reconfigure information			RBSP-101
– CHOICE CTFC Size	Number of bits used must be enough to cover all combinations of CTFC from clause 6.10.2.4 Parameter Set.		RBSP-102
– CTFC information	This IE is repeated for TFC numbers and reference to clause 6.10.2.4 Parameter Set		RBSP-103
– CTFC	Reference to clause 6.10.2.4 Parameter Set		RBSP-104
– Power offset information			RBSP-105
– CHOICE Gain Factors	Computed Gain Factors(The last TFC is set to Signalled Gain Factors)		RBSP-106
– Gain factor βc	11 (below 64 kbps) 9 (higher than 64 kbps) (Not Present if the CHOICE Gain Factors is set to Computed Gain Factors)		RBSP-107
– Gain factor βd	15 (Not Present if the CHOICE Gain Factors is set to Computed Gain Factors)		RBSP-108
– Reference TFC ID	0		RBSP-109
– CHOICE mode	FDD		RBSP-110
– Power offset P p-m	Not Present		RBSP-111
Deleted UL TrCH information list	Not Present		RBSP-112
Added or Reconfigured UL TrCH information list	1		RBSP-113
Added or Reconfigured UL TrCH information	1 DCH added, 1 DCH reconfigured		RBSP-114
– Uplink transport channel type	DCH		RBSP-115
– UL Transport channel identity	1		RBSP-116
– TFS			RBSP-117
– CHOICE Transport channel type	Dedicated transport channels		RBSP-118
– Dynamic Transport format information			RBSP-119
– RLC Size	Reference to clause 6.10 Parameter Set		RBSP-120
– Number of TBs and TTI List	(This IE is repeated for TFI number.)		RBSP-121
– Transmission Time Interval	Not Present		RBSP-122
– Number of Transport blocks	Reference to clause 6.10 Parameter Set		RBSP-123
– CHOICE Logical channel list	All		RBSP-124
– Semi-static Transport Format information			RBSP-125
– Transmission time interval	Reference to clause 6.10 Parameter Set		RBSP-126
– Type of channel coding	Reference to clause 6.10 Parameter Set		RBSP-127
– Coding Rate	Reference to clause 6.10 Parameter Set		RBSP-128
– Rate matching attribute	Reference to clause 6.10 Parameter Set		RBSP-129
– CRC size	Reference to clause 6.10 Parameter Set		RBSP-130
– Uplink transport channel type	DCH		RBSP-131
– UL Transport channel identity	5		RBSP-132
– TFS			RBSP-133
– CHOICE Transport channel type	Dedicated transport channels		RBSP-134
– Dynamic Transport format information			RBSP-135
– RLC Size	Reference to clause 6.10 Parameter Set		RBSP-136
– Number of TBs and TTI List	(This IE is repeated for TFI number.)		RBSP-137
– Transmission Time Interval	Not Present		RBSP-138
– Number of Transport blocks	Reference to clause 6.10 Parameter Set		RBSP-139
– CHOICE Logical channel list	All		RBSP-140
– Semi-static Transport Format information			RBSP-141
– Transmission time interval	Reference to clause 6.10 Parameter Set		RBSP-142
– Type of channel coding	Reference to clause 6.10 Parameter Set		RBSP-143
– Coding Rate	Reference to clause 6.10 Parameter Set		RBSP-144
– Rate matching attribute	Reference to clause 6.10 Parameter Set		RBSP-145
– CRC size	Reference to clause 6.10 Parameter Set		RBSP-146
CHOICE mode	Not Present		RBSP-147
DL Transport channel information common for all transport channel			RBSP-148
– SCCPCH TFCS	Not Present		RBSP-149
– CHOICE mode	FDD		RBSP-150
– CHOICE DL parameters	Explicit		RBSP-151
– DL DCH TFCS			RBSP-152
– CHOICE TFCI Signalling	Normal		RBSP-153
– TFCI Field 1 Information			RBSP-154
– CHOICE TFCS representation	Complete reconfiguration		RBSP-155
– TFCS complete reconfigure			RBSP-156
– CHOICE CTFC Size	Number of bits used must be enough to cover all combinations of CTFC from clause 6.10.2.4 Parameter Set.		RBSP-157
– CTFC information	This IE is repeated for TFC numbers and reference to clause 6.10.2.4		RBSP-158
– CTFC	Reference to clause 6.10.2.4 Parameter Set		RBSP-159
– Power offset information	Not Present		RBSP-160
Added or Reconfigured DL TrCH information list	1		RBSP-161
Added or Reconfigured DL TrCH information	2 TrCHs(DCH for DCCH and DCH for DTCH)		RBSP-162
– Downlink transport channel type	DCH		RBSP-163
– DL Transport channel identity	10		RBSP-164
– CHOICE DL parameters	Same as UL		RBSP-165
– Uplink transport channel type	DCH		RBSP-166
– UL TrCH identity	5		RBSP-167
– DCH quality target			RBSP-168
– BLER Quality value	-20 (-2.0)		RBSP-169
– Downlink transport channel type	DCH		RBSP-170
– DL Transport channel identity	6		RBSP-171
– CHOICE DL parameters	Explicit		RBSP-172
– TFS			RBSP-173
– CHOICE Transport channel type	Dedicated transport channel		RBSP-174
– Dynamic transport format information			RBSP-175
– RLC Size	Reference to clause 6.10 Parameter Set		RBSP-176
– Number of TBs and TTI List	(This IE is repeated for TFI number.)		RBSP-177
– Dynamic transport format information			RBSP-178
– Transmission Time Interval	Not Present		RBSP-179
– Number of Transport blocks	Reference to clause 6.10 Parameter Set		RBSP-180
– CHOICE Logical channel list	All		RBSP-181
– Semi-static Transport Format information			RBSP-182
– Transmission time interval	Reference to clause 6.10 Parameter Set		RBSP-183
– Type of channel coding	Reference to clause 6.10 Parameter Set		RBSP-184
– Coding Rate	Reference to clause 6.10 Parameter Set		RBSP-185
– Rate matching attribute	Reference to clause 6.10 Parameter Set		RBSP-186
– CRC size	Reference to clause 6.10 Parameter Set		RBSP-187
– DCH quality target			RBSP-188
– BLER Quality value	-20 (-2.0)		RBSP-189
Frequency info	Not Present		RBSP-190
Multi-frequency Info	Not present	Rel-7	RBSP-191
DTX-DRX timing information	Not present	Rel-7	RBSP-192
DRX Information	Not present	Rel-7	RBSP-193
HS-SCCH less Information	Not present	Rel-7	RBSP-194
MIMO parameters	Not present	Rel-7	RBSP-195
Maximum allowed UL TX power	33dBm		RBSP-196
CHOICE channel requirement	Uplink DPCH info	Rel-5 and earlier	RBSP-197
Uplink DPCH info		Rel-6	RBSP-198
– Uplink DPCH power control info			RBSP-199
– CHOICE mode	FDD		RBSP-200
– DPCCH power offset	-40 (-80dB) IE value will have no effect on the UE UL power when closed loop power control is active		RBSP-201
– PC Preamble	1 frame		RBSP-202
– SRB delay	7 frames		RBSP-203
– Power Control Algorithm	Algorithm1		RBSP-204
– TPC step size	0 (1dB)		RBSP-205
– ACK	Not Present	Rel-5	RBSP-206
– NACK	Not Present	Rel-5	RBSP-207
– Ack-Nack repetition factor	Not Present	Rel-5	RBSP-208
– CHOICE mode	FDD		RBSP-209
– Scrambling code type	Long		RBSP-210
– Scrambling code number	0 (0 to 16777215)		RBSP-211
– Number of DPDCH	1		RBSP-212
– spreading factor	64		RBSP-213
– TFCI existence	TRUE		RBSP-214
– Number of FBI bit	Not Present(0)		RBSP-215
– Puncturing Limit	1		RBSP-216
CHOICE Mode	FDD	R99 and Rel-4 only	RBSP-217
E-DCH Info	Not Present	Rel-6	RBSP-218
– Downlink PDSCH information	Not Present	R99 and Rel-4 only	RBSP-219
Downlink HS-PDSCH Information	Not Present	Rel-5	RBSP-220
Downlink information common for all radio links			RBSP-221
– Downlink DPCH info common for all RL			RBSP-222
– Timing indicator	Maintain		RBSP-223
– CFN-targetSFN frame offset	Not Present		RBSP-224
– Downlink DPCH power control information			RBSP-225
– CHOICE mode	FDD		RBSP-226
– DPC mode	0 (single)		RBSP-227
– CHOICE mode	FDD		RBSP-228
– Power offset PPilot-DPDCH	0		RBSP-229
– DL rate matching restriction information	Not Present		RBSP-230
– Spreading factor	Reference to clause 6.10 Parameter Set		RBSP-231
– Fixed or Flexible Position	Reference to clause 6.10 Parameter Set		RBSP-232
– TFCI existence	Reference to clause 6.10 Parameter Set		RBSP-233
– CHOICE SF	Reference to clause 6.10 Parameter Set		RBSP-234
– CHOICE mode	FDD		RBSP-235
– DPCH compressed mode info	Not Present		RBSP-236
– TX Diversity mode	None		RBSP-237
– SSDT information	Not Present	R99 and Rel-4 only	RBSP-238
– Default DPCH Offset Value	Not Present		RBSP-239
– MAC-hs reset indicator	Not Present	Rel-5	RBSP-240
– Post-verification period	Not Present	Rel-6	RBSP-241
Downlink information per radio link list			RBSP-242
– Downlink information for each radio link			RBSP-243
– CHOICE mode	FDD		RBSP-244
– Primary CPICH info			RBSP-245
– Primary scrambling code	Reference to clause 6.1 "Default settings (FDD)"		RBSP-246
– PDSCH with SHO DCH info	Not Present	R99 and Rel-4 only	RBSP-247
– PDSCH code mapping	Not Present	R99 and Rel-4 only	RBSP-248
– Downlink DPCH info for each RL			RBSP-249
– CHOICE mode	FDD		RBSP-250
– Primary CPICH usage for channel estimation	Primary CPICH may be used		RBSP-251
– DPCH frame offset	Set to value Default DPCH Offset Value (as currently stored in SS) mod 38 400		RBSP-252
– Secondary CPICH info	Not Present		RBSP-253
– DL channelisation code			RBSP-254
– Secondary scrambling code	Not present		RBSP-255
– Spreading factor	Reference to clause 6.10 Parameter Set		RBSP-256
– Code number	Depends upon radio bearer used.		RBSP-257
– Scrambling code change	No change		RBSP-258
– TPC combination index	0		RBSP-259
– SSDT Cell Identity	Not Present	R99 and Rel-4 only	RBSP-260
– Closed loop timing adjustment mode	Not Present		RBSP-261
– SCCPCH information for FACH	Not Present	R99 and Rel-4 only	RBSP-262
MBMS PL Service Restriction Information	Not Present	Rel-6	RBSP-263

Contents of RADIO BEARER SETUP message: AM or UM (UE supports CS RAB for Test Loop Mode 2)

Information Element	Value/remark	Version	Index
Message Type			RBSC-001
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3		RBSC-002
Integrity check info			RBSC-003
– message authentication code	SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.		RBSC-004
– RRC message sequence number	SS provides the value of this IE, from its internal counter.		RBSC-005
Integrity protection mode info	Not Present		RBSC-006
Ciphering mode info	Not Present		RBSC-007
Activation time	(256+CFN-(CFN MOD 8 + 8))MOD 256		RBSC-008
New U-RNTI	Not Present		RBSC-009
New C-RNTI	Not Present		RBSC-010
New DSCH-RNTI	Not Present	R99 and Rel-4 only	RBSC-011
New H-RNTI	Not Present	Rel-5	RBSC-012
New Primary E-RNTI	Not Present	Rel-6	RBSC-013
New Secondary E-RNTI	Not Present	Rel-6	RBSC-014
RRC State indicator	CELL_DCH		RBSC-015
UTRAN DRX cycle length coefficient	Not Present		RBSC-016
CN information info	Not Present		RBSC-017
URA identity	Not Present		RBSC-018
CHOICE specification mode	Complete specification	Rel-6	RBSC-019
Signalling RB information to setup	Not Present		RBSC-020
RAB information for setup list			RBSC-021
– RAB information for setup			RBSC-022
– RAB info			RBSC-023
– RAB identity	0000 0001B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBSC-024
– CN domain identity	CS domain		RBSC-025
– NAS Synchronization Indicator	Not Present		RBSC-026
– Re-establishment timer	UseT314		RBSC-027
– RB information to setup list			RBSC-028
– RB information to setup			RBSC-029
– RB identity	10		RBSC-030
– PDCP info	Not Present		RBSC-031
– CHOICE RLC info type	RLC info		RBSC-032
– CHOICE Uplink RLC mode	TM RLC		RBSC-033
– Transmission RLC discard	Not Present		RBSC-034
– Segmentation indication	FALSE		RBSC-035
– CHOICE Downlink RLC mode	TM RLC		RBSC-036
– Segmentation indication	FALSE		RBSC-037
– RB mapping info			RBSC-038
– Information for each multiplexing option			RBSC-039
– RLC logical channel mapping indicator	Not Present		RBSC-040
– Number of uplink RLC logical channels	1		RBSC-041
– Uplink transport channel type	DCH		RBSC-042
– UL Transport channel identity	1		RBSC-043
– Logical channel identity	Not Present		RBSC-044
– CHOICE RLC size list	Configured		RBSC-045
– MAC logical channel priority	7		RBSC-046
– Downlink RLC logical channel info			RBSC-047
– Number of downlink RLC logical channels	1		RBSC-048
– Downlink transport channel type	DCH		RBSC-049
– DL DCH Transport channel identity	6		RBSC-050
– DL DSCH Transport channel identity	Not Present		RBSC-051
– Logical channel identity	Not Present		RBSC-052
RB information to reconfigure list	Not Present	Rel-6	RBSC-053
RB information to be affected list	Not Present		RBSC-054
Downlink counter synchronization info	Not Present		RBSC-055
UL Transport channel information for all transport channels			RBSC-056
– PRACH TFCS	Not Present		RBSC-057
– CHOICE mode	FDD		RBSC-058
– TFC subset	Not Present		RBSC-059
– UL DCH TFCS			RBSC-060
– CHOICE TFCI signalling	Normal		RBSC-061
– TFCI Field 1 information			RBSC-062
– CHOICE TFCS representation	Complete reconfiguration		RBSC-063
– TFCS complete reconfigure information			RBSC-064
– CHOICE CTFC Size	2 bit CTFC		RBSC-065
– CTFC information	4 TFCs		RBSC-066
– 2bit CTFC	0		RBSC-067
– Power offset Information			RBSC-068
– CHOICE Gain Factors	Computed Gain Factors		RBSC-069
– Reference TFC ID	0		RBSC-070
– CHOICE mode	FDD		RBSC-071
– Power offset Pp-m	Not Present		RBSC-072
– 2bit CTFC	2		RBSC-073
– Power offset Information			RBSC-074
– CHOICE Gain Factors	Computed Gain Factors		RBSC-075
– Reference TFC ID	0		RBSC-076
– CHOICE mode	FDD		RBSC-077
– Power offset Pp-m	Not Present		RBSC-078
– 2bit CTFC	1		RBSC-079
– Power offset Information			RBSC-080
– CHOICE Gain Factors	Computed Gain Factors		RBSC-081
– Reference TFC ID	0		RBSC-082
– CHOICE mode	FDD		RBSC-083
– Power offset Pp-m	Not Present		RBSC-084
– 2bit CTFC	3		RBSC-085
– Power offset Information			RBSC-086
– CHOICE Gain Factors	Signalled Gain Factors		RBSC-087
– CHOICE mode	FDD		RBSC-088
– Gain factor ßc	8		RBSC-089
– Gain factor ßd	15		RBSC-090
– Reference TFC ID	0		RBSC-091
– CHOICE mode	FDD		RBSC-092
– Power offset Pp-m	Not Present		RBSC-093
Deleted UL TrCH information list	Not Present		RBSC-094
Added or Reconfigured UL TrCH information list	1		RBSC-095
– Added or Reconfigured UL TrCH information			RBSC-096
– Uplink transport channel type	DCH		RBSC-097
– UL Transport channel identity	1		RBSC-098
– TFS			RBSC-099
– CHOICE Transport channel type	Dedicated transport channels		RBSC-100
– Dynamic Transport Format Information			RBSC-101
– RLC size	260 bits		RBSC-102
– Number of TBs and TTI List	2		RBSC-103
– Transmission Time Interval	Not Present		RBSC-104
– Number of Transport blocks	0		RBSC-105
– Transmission Time Interval	Not Present		RBSC-106
– Number of Transport blocks	1		RBSC-107
– CHOICE Logical channel List	ALL		RBSC-108
– Semi-static Transport Format Information			RBSC-109
– Transmission time interval	20		RBSC-110
– Type of channel coding	Convolutional		RBSC-111
– Coding Rate	1/3		RBSC-112
– Rate matching attribute	256		RBSC-113
– CRC size	0		RBSC-114
CHOICE mode	Not Present		RBSC-115
DL Transport channel information common for all transport channel			RBSC-116
– SCCPCH TFCS	Not Present		RBSC-117
– CHOICE mode	FDD		RBSC-118
– CHOICE DL parameters	Same as UL		RBSC-119
Deleted DL TrCH information list	Not Present		RBSC-120
Added or Reconfigured DL TrCH information list	1		RBSC-121
– Added or Reconfigured DL TrCH information			RBSC-122
– Downlink transport channel type	DCH		RBSC-123
– DL Transport channel identity	6		RBSC-124
– CHOICE DL parameters			RBSC-125
– CHOICE Transport channel type	Dedicated transport channels		RBSC-126
– Dynamic Transport Format Information			RBSC-127
– RLC size	244 bits		RBSC-128
– Number of TBs and TTI List	2		RBSC-129
– Transmission Time Interval	Not Present		RBSC-130
– Number of Transport blocks	0		RBSC-131
– Transmission Time Interval	Not Present		RBSC-132
– Number of Transport blocks	1		RBSC-133
– CHOICE Logical channel List	ALL		RBSC-134
– Semi-static Transport Format Information			RBSC-135
– Transmission time interval	20		RBSC-136
– Type of channel coding	Convolutional		RBSC-137
– Coding Rate	1/3		RBSC-138
– Rate matching attribute	256		RBSC-139
– CRC size	16		RBSC-140
– DCH quality target			RBSC-141
– BLER Quality value	-20 (-2.0)		RBSC-142
Frequency info	Not Present		RBSC-143
Multi-frequency Info	Not present	Rel-7	RBSC-144
DTX-DRX timing information	Not present	Rel-7	RBSC-145
DRX Information	Not present	Rel-7	RBSC-146
HS-SCCH less Information	Not present	Rel-7	RBSC-147
MIMO parameters	Not present	Rel-7	RBSC-148
Maximum allowed UL TX power	33dBm		RBSC-149
CHOICE channel requirement	Uplink DPCH info	Rel-5 and earlier	RBSC-150
Uplink DPCH info		Rel-6	RBSC-151
– Uplink DPCH power control info			RBSC-152
– CHOICE mode	FDD		RBSC-153
– DPCCH power offset	-40 (-80dB) IE value will have no effect on the UE UL power when closed loop power control is active		RBSC-154
– PC Preamble	1 frame		RBSC-155
– SRB delay	7 frames		RBSC-156
– Power Control Algorithm	Algorithm1		RBSC-157
– TPC step size	0 (1dB)		RBSC-158
– ACK	Not Present	Rel-5	RBSC-159
– NACK	Not Present	Rel-5	RBSC-160
– Ack-Nack repetition factor	Not Present	Rel-5	RBSC-161
– CHOICE mode	FDD		RBSC-162
– Scrambling code type	Long		RBSC-163
– Scrambling code number	0 (0 to 16777215)		RBSC-164
– Number of DPDCH	1		RBSC-165
– spreading factor	64		RBSC-166
– TFCI existence	TRUE		RBSC-167
– Number of FBI bit	Not Present(0)		RBSC-168
– Puncturing Limit	1		RBSC-169
CHOICE Mode	FDD	R99 and Rel-4 only	RBSC-170
– Downlink PDSCH information	Not Present	R99 and Rel-4 only	RBSC-171
E-DCH Info	Not Present	Rel-6	RBSC-172
Downlink HS-PDSCH Information	Not Present	Rel-5	RBSC-173
Downlink information common for all radio links			RBSC-174
– Downlink DPCH info common for all RL			RBSC-175
– Timing indicator	Maintain		RBSC-176
– CFN-targetSFN frame offset	Not Present		RBSC-177
– Downlink DPCH power control information			RBSC-178
– CHOICE mode	FDD		RBSC-179
– DPC mode	0 (single)		RBSC-180
– CHOICE mode	FDD		RBSC-181
– Power offset PPilot-DPDCH	0		RBSC-182
– DL rate matching restriction information	Not Present		RBSC-183
– Spreading factor	128		RBSC-184
– Fixed or Flexible Position	Fixed		RBSC-185
– TFCI existence	TRUE		RBSC-186
– CHOICE SF	128		RBSC-187
– Number of bits for Pilot bits	8		RBSC-188
– CHOICE mode	FDD		RBSC-189
– DPCH compressed mode info	Not Present		RBSC-190
– TX Diversity mode	None		RBSC-191
– SSDT information	Not Present	R99 and Rel-4 only	RBSC-192
– Default DPCH Offset Value	Not Present		RBSC-193
– MAC-hs reset indicator	Not Present	Rel-5	RBSC-194
– Post-verification period	Not Present	Rel-6	RBSC-195
Downlink information for per radio link list			RBSC-196
– Downlink information for each radio link			RBSC-197
– CHOICE mode	FDD		RBSC-198
– Primary CPICH info			RBSC-199
– Primary scrambling code	Reference to clause 6.1 "Default settings (FDD)"		RBSC-200
– PDSCH with SHO DCH info	Not Present	R99 and Rel-4 only	RBSC-201
– PDSCH code mapping	Not Present	R99 and Rel-4 only	RBSC-202
– Downlink DPCH info for each RL			RBSC-203
– CHOICE mode	FDD		RBSC-204
– Primary CPICH usage for channel estimation	Primary CPICH may be used		RBSC-205
– DPCH frame offset	Set to value Default DPCH Offset Value (as currently stored in SS) mod 38 400		RBSC-206
– Secondary CPICH info	Not Present		RBSC-207
– DL channelisation code			RBSC-208
– Secondary scrambling code	Not Present		RBSC-209
– Spreading factor	128		RBSC-210
– Code number	96		RBSC-211
– Scrambling code change	No change		RBSC-212
– TPC combination index	0		RBSC-213
– SSDT Cell Identity	Not Present	R99 and Rel-4 only	RBSC-214
– Closed loop timing adjustment mode	Not Present		RBSC-215
– SCCPCH information for FACH	Not Present	R99 and Rel-4 only	RBSC-216
MBMS PL Service Restriction Information	Not Present	Rel-6	RBSC-217

Information Element	Condition	Value/remark		Version	Index
Message Type	A1,A2				RBS2-001
RRC transaction identifier		Arbitrarily selects an integer between 0 and 3			RBS2-002
Integrity check info					RBS2-003
– message authentication code		SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.			RBS2-004
– RRC message sequence number		SS provides the value of this IE, from its internal counter.			RBS2-005
Integrity protection mode info		Not Present			RBS2-006
Ciphering mode info		Not Present			RBS2-007
Activation time		(256+CFN-(CFN MOD 8 + 8))MOD 256			RBS2-008
New U-RNTI		Not Present			RBS2-009
New C-RNTI		Not Present			RBS2-010
New DSCH-RNTI		Not Present		R99 and Rel-4 only	RBS2-011
New H-RNTI		Not Present		Rel-5	RBS2-012
New Primary E-RNTI		Not Present		Rel-6	RBS2-013
New Secondary E-RNTI		Not Present		Rel-6	RBS2-014
RRC State indicator		CELL_DCH			RBS2-015
UTRAN DRX cycle length coefficient		Not Present			RBS2-016
CN information info		Not Present			RBS2-017
URA identity		Not Present			RBS2-018
CHOICE specification mode		Complete specification		Rel-6	RBS2-019
Signalling RB information to setup		Not Present			RBS2-020
RAB information for setup list					RBS2-021
– RAB information for setup					RBS2-022
– RAB info					RBS2-023
– RAB identity		0000 0001B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.			RBS2-024
– CN domain identity		CS domain			RBS2-025
– NAS Synchronization Indicator		Not Present			RBS2-026
– Re-establishment timer		UseT314			RBS2-027
– RB information to setup list					RBS2-028
– RB information to setup					RBS2-029
– RB identity		10			RBS2-030
– PDCP info		Not Present			RBS2-031
– CHOICE RLC info type		RLC info			RBS2-032
– CHOICE Uplink RLC mode		TM RLC			RBS2-033
– Transmission RLC discard		Not Present			RBS2-034
– Segmentation indication		FALSE			RBS2-035
– CHOICE Downlink RLC mode		TM RLC			RBS2-036
– Segmentation indication		FALSE			RBS2-037
– RB mapping info					RBS2-038
– Information for each multiplexing option					RBS2-039
– RLC logical channel mapping indicator		Not Present			RBS2-040
– Number of uplink RLC logical channels		1			RBS2-041
– Uplink transport channel type		DCH			RBS2-042
– UL Transport channel identity		1			RBS2-043
– Logical channel identity		Not Present			RBS2-044
– CHOICE RLC size list		Configured			RBS2-045
– MAC logical channel priority		7			RBS2-046
– Downlink RLC logical channel info					RBS2-047
– Number of downlink RLC logical channels		1			RBS2-048
– Downlink transport channel type		DCH			RBS2-049
– DL DCH Transport channel identity		6			RBS2-050
– DL DSCH Transport channel identity		Not Present			RBS2-051
– Logical channel identity		Not Present			RBS2-052
RB information to reconfigure list		Not Present		Rel-6	RBS2-053
RB information to be affected list		Not Present			RBS2-054
Downlink counter synchronization info		Not Present			RBS2-055
UL Transport channel information for all transport channels					RBS2-056
– PRACH TFCS		Not Present			RBS2-057
– CHOICE mode		FDD			RBS2-058
– TFC subset		Not Present			RBS2-059
– UL DCH TFCS					RBS2-060
– CHOICE TFCI signalling		Normal			RBS2-061
– TFCI Field 1 information					RBS2-062
– CHOICE TFCS representation		Complete reconfiguration			RBS2-063
– TFCS complete reconfigure information					RBS2-064
– CHOICE CTFC Size	A1	2 bit CTFC			RBS2-065
– CTFC information		4 TFCs			RBS2-066
– 2bit CTFC		0			RBS2-067
– Power offset Information					RBS2-068
– CHOICE Gain Factors		Computed Gain Factors			RBS2-069
– Reference TFC ID		0			RBS2-070
– CHOICE mode		FDD			RBS2-071
– Power offset Pp-m		Not Present			RBS2-072
– 2bit CTFC		2			RBS2-073
– Power offset Information					RBS2-074
– CHOICE Gain Factors		Computed Gain Factors			RBS2-075
– Reference TFC ID		0			RBS2-076
– CHOICE mode		FDD			RBS2-077
– Power offset Pp-m		Not Present			RBS2-078
– 2bit CTFC		1			RBS2-079
– Power offset Information					RBS2-080
– CHOICE Gain Factors		Computed Gain Factors			RBS2-081
– Reference TFC ID		0			RBS2-082
– CHOICE mode		FDD			RBS2-083
– Power offset Pp-m		Not Present			RBS2-084
– 2bit CTFC		3			RBS2-085
– Power offset Information					RBS2-086
– CHOICE Gain Factors		Signalled Gain Factors			RBS2-087
– CHOICE mode		FDD			RBS2-088
– Gain factor ßc		8			RBS2-089
– Gain factor ßd		15			RBS2-090
– Reference TFC ID		0			RBS2-091
– CHOICE mode		FDD			RBS2-092
– Power offset Pp-m		Not Present			RBS2-093
– CHOICE CTFC Size	A2	4 bit CTFC			RBS2-094
– CTFC information		6 TFCs			RBS2-095
– 4bit CTFC		0			RBS2-096
– Power offset Information					RBS2-097
– CHOICE Gain Factors		Computed Gain Factors			RBS2-098
– Reference TFC ID		0			RBS2-099
– CHOICE mode		FDD			RBS2-100
– Power offset Pp-m		Not Present			RBS2-101
– 4bit CTFC		3			RBS2-102
– Power offset Information					RBS2-103
– CHOICE Gain Factors		Computed Gain Factors			RBS2-104
– Reference TFC ID		0			RBS2-105
– CHOICE mode		FDD			RBS2-106
– Power offset Pp-m		Not Present			RBS2-107
– 4bit CTFC		1			RBS2-108
– Power offset Information					RBS2-109
– CHOICE Gain Factors		Computed Gain Factors			RBS2-110
– Reference TFC ID		0			RBS2-111
– CHOICE mode		FDD			RBS2-112
– Power offset Pp-m		Not Present			RBS2-113
– 4bit CTFC		4			RBS2-114
– Power offset Information					RBS2-115
– CHOICE Gain Factors		Computed Gain Factors			RBS2-116
– Reference TFC ID		0			RBS2-117
– CHOICE mode		FDD			RBS2-118
– Power offset Pp-m		Not Present			RBS2-119
– 4bit CTFC		2			RBS2-120
– Power offset Information					RBS2-121
– CHOICE Gain Factors		Computed Gain Factors			RBS2-122
– Reference TFC ID		0			RBS2-123
– CHOICE mode		FDD			RBS2-124
– Power offset Pp-m		Not Present			RBS2-125
– 4bit CTFC		5			RBS2-126
– Power offset Information					RBS2-127
– CHOICE Gain Factors		Signalled Gain Factors			RBS2-128
– CHOICE mode		FDD			RBS2-129
– Gain factor ßc		8			RBS2-130
– Gain factor ßd		15			RBS2-131
– Reference TFC ID		0			RBS2-132
– CHOICE mode		FDD			RBS2-133
– Power offset Pp-m		Not Present			RBS2-134
Deleted UL TrCH information list	A1,A2	Not Present			RBS2-135
Added or Reconfigured UL TrCH information list		1			RBS2-136
– Added or Reconfigured UL TrCH information					RBS2-137
– Uplink transport channel type		DCH			RBS2-138
– UL Transport channel identity		1			RBS2-139
– TFS					RBS2-140
– CHOICE Transport channel type		Dedicated transport channels			RBS2-141
– Dynamic Transport Format Information	A1				RBS2-142
– RLC size		260 bits			RBS2-143
– Number of TBs and TTI List		2			RBS2-144
– Transmission Time Interval		Not Present			RBS2-145
– Number of Transport blocks			0		RBS2-146
– Transmission Time Interval		Not Present			RBS2-147
– Number of Transport blocks		1			RBS2-148
– CHOICE Logical channel List		ALL			RBS2-149
– Dynamic Transport Format Information	A2				RBS2-150
– RLC size		260 bits			RBS2-151
– Number of TBs and TTI List		1			RBS2-152
– Transmission Time Interval		Not Present			RBS2-153
– Number of Transport blocks			0		RBS2-154
– CHOICE Logical channel List		ALL			RBS2-155
– Dynamic Transport Format Information					RBS2-156
– RLC size		16 bits			RBS2-157
– Number of TBs and TTI List		1			RBS2-158
– Transmission Time Interval		Not Present			RBS2-159
– Number of Transport blocks		1			RBS2-160
– CHOICE Logical channel List		ALL			RBS2-161
– Dynamic Transport Format Information					RBS2-162
– RLC size		260 bits			RBS2-163
– Number of TBs and TTI List		1			RBS2-164
– Transmission Time Interval		Not Present			RBS2-165
– Number of Transport blocks		1			RBS2-166
– CHOICE Logical channel List		ALL			RBS2-167
– Semi-static Transport Format Information	A1,A2				RBS2-168
– Transmission time interval		20			RBS2-169
– Type of channel coding		Convolutional			RBS2-170
– Coding Rate		1/3			RBS2-171
– Rate matching attribute		256			RBS2-172
– CRC size		0			RBS2-173
CHOICE mode		Not Present			RBS2-174
DL Transport channel information common for all transport channel					RBS2-175
– SCCPCH TFCS		Not Present			RBS2-176
– CHOICE mode		FDD			RBS2-177
– CHOICE DL parameters	A1	Same as UL			RBS2-178
– CHOICE DL parameters	A2	DL DCH TFCS			RBS2-179
– DL DCH TFCS					RBS2-180
– CHOICE TFCI signalling		Normal			RBS2-181
– TFCI Field 1 information					RBS2-182
– CHOICE TFCS representation		Complete reconfiguration			RBS2-183
– TFCS complete reconfigure information					RBS2-184
– CHOICE CTFC Size		4 bit CTFC			RBS2-185
– CTFC information		4 TFCs			RBS2-186
– 4bit CTFC		0			RBS2-187
– Power offset Information					RBS2-188
– CHOICE Gain Factors		Computed Gain Factors			RBS2-189
– Reference TFC ID		0			RBS2-190
– CHOICE mode		FDD			RBS2-191
– Power offset Pp-m		Not Present			RBS2-192
– 4bit CTFC		2			RBS2-193
– Power offset Information					RBS2-194
– CHOICE Gain Factors		Computed Gain Factors			RBS2-195
– Reference TFC ID		0			RBS2-196
– CHOICE mode		FDD			RBS2-197
– Power offset Pp-m		Not Present			RBS2-198
– 4bit CTFC		1			RBS2-199
– Power offset Information					RBS2-200
– CHOICE Gain Factors		Computed Gain Factors			RBS2-201
– Reference TFC ID		0			RBS2-202
– CHOICE mode		FDD			RBS2-203
– Power offset Pp-m		Not Present			RBS2-204
– 4bit CTFC		3			RBS2-205
– Power offset Information					RBS2-206
– CHOICE Gain Factors		Signalled Gain Factors			RBS2-207
– CHOICE mode		FDD			RBS2-208
– Gain factor ßc		8			RBS2-209
– Gain factor ßd		15			RBS2-210
– Reference TFC ID		0			RBS2-211
– CHOICE mode		FDD			RBS2-212
– Power offset Pp-m		Not Present			RBS2-213
Deleted DL TrCH information list	A1,A2	Not Present			RBS2-214
Added or Reconfigured DL TrCH information list		1			RBS2-215
– Added or Reconfigured DL TrCH information					RBS2-216
– Downlink transport channel type		DCH			RBS2-217
– DL Transport channel identity		6			RBS2-218
– CHOICE DL parameters					RBS2-219
– CHOICE Transport channel type		Dedicated transport channels			RBS2-220
– Dynamic Transport Format Information	A1				RBS2-221
– RLC size		244 bits			RBS2-222
– Number of TBs and TTI List		2			RBS2-223
– Transmission Time Interval		Not Present			RBS2-224
– Number of Transport blocks		0			RBS2-225
– Transmission Time Interval		Not Present			RBS2-226
– Number of Transport blocks		1			RBS2-227
– CHOICE Logical channel List		ALL			RBS2-228
– Dynamic Transport Format Information	A2				RBS2-229
– RLC size		0 bits			RBS2-230
– Number of TBs and TTI List		1			RBS2-231
– Transmission Time Interval		Not Present			RBS2-232
– Number of Transport blocks		1			RBS2-233
– CHOICE Logical channel List		ALL			RBS2-234
– Dynamic Transport Format Information					RBS2-235
– RLC size		244 bits			RBS2-236
– Number of TBs and TTI List		1			RBS2-237
– Transmission Time Interval		Not Present			RBS2-238
– Number of Transport blocks		1			RBS2-239
– CHOICE Logical channel List		ALL			RBS2-240
– Semi-static Transport Format Information	A1,A2				RBS2-241
– Transmission time interval		20			RBS2-242
– Type of channel coding		Convolutional			RBS2-243
– Coding Rate		1/3			RBS2-244
– Rate matching attribute		256			RBS2-245
– CRC size		16			RBS2-246
– DCH quality target					RBS2-247
– BLER Quality value		-20 (-2.0)			RBS2-248
Frequency info		Not Present			RBS2-249
Maximum allowed UL TX power		33dBm			RBS2-250
CHOICE channel requirement		Uplink DPCH info		Rel-5 and earlier	RBS2-251
Uplink DPCH info				Rel-6	RBS2-252
– Uplink DPCH power control info					RBS2-253
– CHOICE mode		FDD			RBS2-254
– DPCCH power offset		-40 (-80dB) IE value will have no effect on the UE UL power when closed loop power control is active			RBS2-255
– PC Preamble		1 frame			RBS2-256
– SRB delay		7 frames			RBS2-257
– Power Control Algorithm		Algorithm1			RBS2-258
– TPC step size		0 (1dB)			RBS2-259
– ACK		Not Present		Rel-5	RBS2-260
– NACK		Not Present		Rel-5	RBS2-261
– Ack-Nack repetition factor		Not Present		Rel-5	RBS2-262
– CHOICE mode		FDD			RBS2-263
– Scrambling code type		Long			RBS2-264
– Scrambling code number		0 (0 to 16777215)			RBS2-265
– Number of DPDCH		1			RBS2-266
– spreading factor		64			RBS2-267
– TFCI existence		TRUE			RBS2-268
– Number of FBI bit		Not Present(0)			RBS2-269
– Puncturing Limit		1			RBS2-270
CHOICE Mode		FDD		R99 and Rel-4 only	RBS2-271
– Downlink PDSCH information		Not Present		R99 and Rel-4 only	RBS2-272
E-DCH Info		Not Present		Rel-6	RBS2-273
Downlink HS-PDSCH Information		Not Present		Rel-5	RBS2-274
Downlink information common for all radio links					RBS2-275
– Downlink DPCH info common for all RL					RBS2-276
– Timing indicator		Maintain			RBS2-277
– CFN-targetSFN frame offset		Not Present			RBS2-278
– Downlink DPCH power control information					RBS2-279
– CHOICE mode		FDD			RBS2-280
– DPC mode		0 (single)			RBS2-281
– CHOICE mode		FDD			RBS2-282
– Power offset PPilot-DPDCH		0			RBS2-283
– DL rate matching restriction information		Not Present			RBS2-284
– Spreading factor		128			RBS2-285
– Fixed or Flexible Position		Fixed			RBS2-286
– TFCI existence		TRUE			RBS2-287
– CHOICE SF		128			RBS2-288
– Number of bits for Pilot bits		8			RBS2-289
– CHOICE mode		FDD			RBS2-290
– DPCH compressed mode info		Not Present			RBS2-291
– TX Diversity mode		None			RBS2-292
– SSDT information		Not Present		R99 and Rel-4 only	RBS2-293
– Default DPCH Offset Value		Not Present			RBS2-294
– MAC-hs reset indicator		Not Present		Rel-5	RBS2-295
– Post-verification period		Not Present		Rel-6	RBS2-296
Downlink information for per radio link list					RBS2-297
– Downlink information for each radio link					RBS2-298
– CHOICE mode		FDD			RBS2-299
– Primary CPICH info					RBS2-300
– Primary scrambling code		Reference to clause 6.1 "Default settings (FDD)"			RBS2-301
– PDSCH with SHO DCH info		Not Present		R99 and Rel-4 only	RBS2-302
– PDSCH code mapping		Not Present		R99 and Rel-4 only	RBS2-303
– Downlink DPCH info for each RL					RBS2-304
– CHOICE mode		FDD			RBS2-305
– Primary CPICH usage for channel estimation		Primary CPICH may be used			RBS2-306
– DPCH frame offset		Set to value Default DPCH Offset Value (as currently stored in SS) mod 38 400			RBS2-307
– Secondary CPICH info		Not Present			RBS2-308
– DL channelisation code					RBS2-309
– Secondary scrambling code		Not Present			RBS2-310
– Spreading factor		128			RBS2-311
– Code number		96			RBS2-312
– Scrambling code change		No change			RBS2-313
– TPC combination index		0			RBS2-314
– SSDT Cell Identity		Not Present		R99 and Rel-4 only	RBS2-315
– Closed loop timing adjustment mode		Not Present			RBS2-316
– SCCPCH information for FACH		Not Present		R99 and Rel-4 only	RBS2-317
MBMS PL Service Restriction Information		Not Present		Rel-6	RBS2-318

Condition	Explanation
A1	This IE is needed for "UE supports CS RAB for Test Loop Mode2 RMC 12.2/12.2 (TM)"
A2	This IE is needed for "UE supports CS RAB for Test Loop Mode2 RMC 0 and 12.2 (TM)"

Contents of RADIO BEARER SETUP message: AM or UM (HSDPA)

Information Element	Value/remark	Version	Index
Message Type			RBSH-001
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3		RBSH-002
Integrity check info			RBSH-003
– message authentication code	SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.		RBSH-004
– RRC message sequence number	SS provides the value of this IE, from its internal counter.		RBSH-005
Integrity protection mode info	Not Present		RBSH-006
Ciphering mode info	Not Present		RBSH-007
Activation time	Not Present		RBSH-008
New U-RNTI	Not Present		RBSH-009
New C-RNTI	Not Present		RBSH-010
New H-RNTI	‘1010 1010 1010 1010’	Rel-5	RBSH-011
New Primary E-RNTI	Not Present	Rel-6	RBSH-012
New Secondary E-RNTI	Not Present	Rel-6	RBSH-013
RRC State indicator	CELL_DCH		RBSH-014
UTRAN DRX cycle length coefficient	Not Present		RBSH-015
CN information info	Not Present		RBSH-016
URA identity	Not Present		RBSH-017
CHOICE specification mode	Complete specification	Rel-6	RBSH-018
Signalling RB information to setup	Not Present		RBSH-019
RAB information for setup list			RBSH-020
– RAB information for setup			RBSH-021
– RAB info	(high-speed UM DTCH for PS domain)		RBSH-022
– RAB identity	0000 0110B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBSH-023
– CN domain identity	PS domain		RBSH-024
– NAS Synchronization Indicator	Not Present		RBSH-025
– Re-establishment timer	UseT315		RBSH-026
– RB information to setup			RBSH-027
– RB identity	25		RBSH-028
– PDCP info	Not Present		RBSH-029
– CHOICE RLC info type	RLC info		RBSH-030
– CHOICE Uplink RLC mode	Not Present		RBSH-031
– CHOICE Downlink RLC mode	UM RLC		RBSH-032
– DL UM RLC LI size	Selected with DL UM RLC data size	Rel-5	RBSH-033
– One sided RLC re-establishment	FALSE	Rel-5	RBSH-034
– RB mapping info			RBSH-035
– Information for each multiplexing option	1 RBMuxOptions		RBSH-036
– RLC logical channel mapping indicator	Not Present		RBSH-037
– Downlink RLC logical channel info			RBSH-038
– Number of downlink RLC logical channels	1		RBSH-039
– Downlink transport channel type	HS-DSCH		RBSH-040
– DL DCH Transport channel identity	Not Present		RBSH-041
– DL DSCH Transport channel identity	Not Present		RBSH-042
– CHOICE DL MAC header type	MAC-hs	Rel-7	RBSH-043
– DL HS-DSCH MAC-d flow identity	0		RBSH-044
– Logical channel identity	Not Present		RBSH-045
RB information to reconfigure list	Not Present	Rel-6	RBSH-046
RB information to be affected list	Not Present		RBSH-047
Downlink counter synchronization info	Not Present		RBSH-048
PDCP ROHC target mode	Not Present	Rel-5	RBSH-049
UL Transport channel information for all transport channels			RBSH-050
– PRACH TFCS	Not Present		RBSH-051
– CHOICE mode	FDD		RBSH-052
– TFC subset	Not Present		RBSH-053
– UL DCH TFCS			RBSH-054
– CHOICE TFCI signalling	Normal		RBSH-055
– TFCI Field 1 information			RBSH-056
– CHOICE TFCS representation	Complete reconfiguration		RBSH-057
– TFCS complete reconfigure information			RBSH-058
– CHOICE CTFC Size	2 bit CTFC		RBSH-059
– CTFC information	4 TFCs		RBSH-060
– CTFC	Reference to clause TS 34.121 clause C.2.1 Parameter Set		RBSH-061
– Power offset information			RBSH-062
– CHOICE Gain Factors	Computed Gain Factors(The last TFC is set to Signalled Gain Factors)		RBSH-063
– Gain factor βc	8 (Not Present if the CHOICE Gain Factors is set to Computed Gain Factors)		RBSH-064
– Gain factor βd	15 (Not Present if the CHOICE Gain Factors is set to Computed Gain Factors)		RBSH-065
– Reference TFC ID	0		RBSH-066
– CHOICE mode	FDD		RBSH-067
– Power offset P p-m	Not Present		RBSH-068
Deleted UL TrCH information list	Not Present		RBSH-069
Added or Reconfigured TrCH information list	Not Present		RBSH-070
CHOICE mode	Not Present		RBSH-071
DL Transport channel information common for all transport channel			RBSH-072
– SCCPCH TFCS	Not Present		RBSH-073
– CHOICE mode	FDD		RBSH-074
– CHOICE DL parameters	Explicit		RBSH-075
– DL DCH TFCS			RBSH-076
– CHOICE TFCI Signalling	Normal		RBSH-077
– TFCI Field 1 Information			RBSH-078
– CHOICE TFCS representation	Complete reconfiguration		RBSH-079
– TFCS complete reconfigure			RBSH-080
– CHOICE CTFC Size	2 bit CTFC		RBSH-081
– CTFC information	4 TFCs		RBSH-082
– CTFC	Reference to clause TS 34.121 clause C.3.1 Parameter Set		RBSH-083
– Power offset information	Not Present		RBSH-084
Deleted DL TrCH information	Not Present		RBSH-085
Added or Reconfigured DL TrCH information list	1 TrCHs added		RBSH-086
– Added or Reconfigured DL TrCH information	(HS-DSCH for DTCH)		RBSH-087
– Downlink transport channel type	HS-DSCH	Rel-5	RBSH-088
– DL Transport channel identity	Not Present		RBSH-089
– CHOICE DL parameters	HS-DSCH		RBSH-090
– HARQ Info		Rel-5	RBSH-091
– Number of Processes	Reference to TS34.121 [2] Annex C Fixed Reference Channels		RBSH-092
– CHOICE Memory Partitioning	Explicit		RBSH-093
– Memory size	Reference to TS34.121 [2] Annex C Fixed Reference Channels parameter “Number of HARQ Processes”.		RBSH-094
– Process Memory Size	Reference to TS34.121 [2] Annex C Fixed Reference Channels parameter “Number of SML’s per HARQ Proc.”.		RBSH-095
– Additional memory sizes for MIMO	Not Present	Rel-7	RBSH-096
– CHOICE DL MAC header type	MAC-hs	Rel-7	RBSH-097
– Added or reconfigured MAC-d flow			RBSH-098
– MAC-hs queue to add or reconfigure list	(one queue)	Rel-5	RBSH-099
– MAC-hs queue Id	0		RBSH-100
– MAC-d Flow Identity	0		RBSH-101
– T1	50		RBSH-102
– MAC-hs window size	16		RBSH-103
– MAC-d PDU size Info			RBSH-104
– MAC-d PDU size	Reference to TS34.121 [2] Annex C Fixed Reference Channels		RBSH-105
– MAC-d PDU size index	0		RBSH-106
– MAC-hs queue to delete list	Not present		RBSH-107
– DCH quality target	Not present		RBSH-108
Frequency info	Not Present		RBSH-109
Multi-frequency Info	Not present	Rel-7	RBSH-110
DTX-DRX timing information	Not present	Rel-7	RBSH-111
DRX Information	Not present	Rel-7	RBSH-112
HS-SCCH less Information	Not present	Rel-7	RBSH-113
MIMO parameters	Not present	Rel-7	RBSH-114
Maximum allowed UL TX power	33dBm		RBSH-115
CHOICE channel requirement	Uplink DPCH info	Rel-5 and earlier	RBSH-116
Uplink DPCH info		Rel-6	RBSH-117
– Uplink DPCH power control info			RBSH-118
– CHOICE mode	FDD		RBSH-119
– DPCCH power offset	-40 (-80dB) IE value will have no effect on the UE UL power when closed loop power control is active		RBSH-120
– PC Preamble	1 frame		RBSH-121
– SRB delay	7 frames		RBSH-122
– Power Control Algorithm	Algorithm1		RBSH-123
– TPC step size	0 (1dB)		RBSH-124
– ACK	3	Rel-5	RBSH-125
– NACK	3	Rel-5	RBSH-126
– Ack-Nack repetition factor	1	Rel-5	RBSH-127
– CHOICE mode	FDD		RBSH-128
– Scrambling code type	Long		RBSH-129
– Scrambling code number	0 (0 to 16777215)		RBSH-130
– Number of DPDCH	Not Present (1)		RBSH-131
– spreading factor	64		RBSH-132
– TFCI existence	TRUE		RBSH-133
– Number of FBI bit	Not Present(0)		RBSH-134
– Puncturing Limit	1		RBSH-135
CHOICE Mode	FDD	R99 and Rel-4 only	RBSH-136
– Downlink PDSCH information	Not Present	R99 and Rel-4 only	RBSH-137
E-DCH Info	Not Present	Rel-6	RBSH-138
Downlink HS-PDSCH Information			RBSH-139
– HS-SCCH Info			RBSH-140
– CHOICE mode	FDD		RBSH-141
– DL Scrambling Code			RBSH-142
– HS-SCCH Channelisation Code Information			RBSH-143
– HS-SCCH Channelisation Code	2		RBSH-144
– HS-SCCH Channelisation Code	3		RBSH-145
– HS-SCCH Channelisation Code	6		RBSH-146
– HS-SCCH Channelisation Code	7		RBSH-147
– Measurement Feedback Info			RBSH-148
– CHOICE mode	FDD		RBSH-149
– POhsdsch	6 dB	Rel-5	RBSH-150
– CQI Feedback cycle, k	2 ms	Rel-5	RBSH-151
– CQI repetition factor	1	Rel-5	RBSH-152
– CQI	5 (corresponds to 0dB in relative power offset)	Rel-5	RBSH-153
– CHOICE mode	FDD		RBSH-154
– Downlink 64QAM configured	Not Present	Rel-7	RBSH-155
Downlink information common for all radio links	Not Present		RBSH-156
Downlink information per radio link list			RBSH-157
– Downlink information for each radio link			RBSH-158
– CHOICE mode	FDD		RBSH-159
– Primary CPICH info			RBSH-160
– Primary scrambling code	Reference to clause 6.1 "Default settings (FDD)"		RBSH-161
– PDSCH with SHO DCH info	Not Present	R99 and Rel-4 only	RBSH-162
– PDSCH code mapping	Not Present	R99 and Rel-4 only	RBSH-163
– Serving HS-DSCH radio link indicator	TRUE	Rel-5	RBSH-164
– Downlink DPCH info for each RL			RBSH-165
– CHOICE mode	FDD		RBSH-166
– Primary CPICH usage for channel estimation	Primary CPICH may be used		RBSH-167
– DPCH frame offset	Set to value Default DPCH Offset Value (as currently stored in SS) mod 38 400		RBSH-168
– Secondary CPICH info	Not Present		RBSH-169
– DL channelisation code			RBSH-170
– Secondary scrambling code	Not present		RBSH-171
– Spreading factor	128		RBSH-172
– Code number	96		RBSH-173
– Scrambling code change	No change		RBSH-174
– TPC combination index	0		RBSH-175
– SSDT Cell Identity	Not Present	R99 and Rel-4 only	RBSH-176
– Closed loop timing adjustment mode	Not Present		RBSH-177
– SCCPCH information for FACH	Not Present	R99 and Rel-4 only	RBSH-178
MBMS PL Service Restriction Information	Not Present	Rel-6	RBSH-179

Contents of RADIO BEARER SETUP message: BTFD RMC for Test Loop Mode 2

Information Element	Value/remark	Version	Index
Message Type			RBSB-001
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3		RBSB-002
Integrity check info			RBSB-003
– message authentication code	SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.		RBSB-004
– RRC message sequence number	SS provides the value of this IE, from its internal counter.		RBSB-005
Integrity protection mode info	Not Present		RBSB-006
Ciphering mode info	Not Present. For correct operation of test loop mode 2 this IE shall be omitted.		RBSB-007
Activation time	(256+CFN-(CFN MOD 8 + 8))MOD 256		RBSB-008
New U-RNTI	Not Present		RBSB-009
New C-RNTI	Not Present		RBSB-010
New DSCH-RNTI	Not Present	R99 and Rel-4 only	RBSB-011
New H-RNTI	Not Present	Rel-5	RBSB-012
New Primary E-RNTI	Not Present	Rel-6	RBSB-013
New Secondary E-RNTI	Not Present	Rel-6	RBSB-014
RRC State indicator	CELL_DCH		RBSB-015
UTRAN DRX cycle length coefficient	Not Present		RBSB-016
CN information info	Not Present		RBSB-017
URA identity	Not Present		RBSB-018
CHOICE specification mode	Complete specification	Rel-5	RBSB-019
– RAB information for setup			RBSB-020
– RAB info			RBSB-021
– RAB identity	0000 0001B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBSB-022
– CN domain identity	CS domain		RBSB-023
– NAS Synchronization Indicator	Not Present		RBSB-024
– Re-establishment timer	UseT314		RBSB-025
– RB information to setup			RBSB-026
– RB identity	10		RBSB-027
– PDCP info	Not Present		RBSB-028
– CHOICE RLC info type	RLC info		RBSB-029
– CHOICE Uplink RLC mode	TM RLC		RBSB-030
– Transmission RLC discard	Not Present		RBSB-031
– Segmentation indication	FALSE		RBSB-032
– CHOICE Downlink RLC mode	TM RLC		RBSB-033
– Segmentation indication	FALSE		RBSB-034
– RB mapping info			RBSB-035
– Information for each multiplexing option			RBSB-036
– RLC logical channel mapping indicator	Not Present		RBSB-037
– Number of uplink RLC logical channels	1		RBSB-038
– Uplink transport channel type	DCH		RBSB-039
– UL Transport channel identity	1		RBSB-040
– Logical channel identity	Not Present		RBSB-041
– CHOICE RLC size list	Configured		RBSB-042
– MAC logical channel priority	7		RBSB-043
– Downlink RLC logical channel info			RBSB-044
– Number of downlink RLC logical channels	1		RBSB-045
– Downlink transport channel type	DCH		RBSB-046
– DL DCH Transport channel identity	6		RBSB-047
– DL DSCH Transport channel identity	Not Present		RBSB-048
– Logical channel identity	Not Present		RBSB-049
RB information to reconfigure list	Not Present	Rel-6	RBSB-050
RB information to be affected	Not Present		RBSB-051
Downlink counter synchronization info	Not Present		RBSB-052
	RMC for BTFD		RBSB-053
UL Transport channel information for all transport channels			RBSB-054
– PRACH TFCS	Not Present		RBSB-055
– CHOICE mode	FDD		RBSB-056
– TFC subset	Not Present		RBSB-057
– UL DCH TFCS			RBSB-058
– CHOICE TFCI signalling	Normal		RBSB-059
– TFCI Field 1 information			RBSB-060
– CHOICE TFCS representation	Complete reconfiguration		RBSB-061
– TFCS complete reconfigure information			RBSB-062
– CHOICE CTFC Size	ctfc6Bit		RBSB-063
– ctfc6Bit	22		RBSB-064
– ctfc6	0		RBSB-065
-powerOffsetInformation(OP)			RBSB-066
-gainFactorInformation	ComputedGainFactors		RBSB-067
– Reference TFC ID	0		RBSB-068
– ctfc6	11		RBSB-069
-powerOffsetInformation(OP)			RBSB-070
-gainFactorInformation	ComputedGainFactors		RBSB-071
– Reference TFC ID	0		RBSB-072
– ctfc6	1		RBSB-073
-powerOffsetInformation(OP)			RBSB-074
-gainFactorInformation	ComputedGainFactors		RBSB-075
– Reference TFC ID	0		RBSB-076
– ctfc6	12		RBSB-077
-powerOffsetInformation(OP)			RBSB-078
-gainFactorInformation	SignalledGainFactors		RBSB-079
-modeSpecificInfo	Fdd		RBSB-080
-fdd			RBSB-081
– Gain factor ßc	8		RBSB-082
– Gain factor ßd	15		RBSB-083
– Reference TFC ID	0		RBSB-084
– ctfc6	2		RBSB-085
-powerOffsetInformation(OP)			RBSB-086
-gainFactorInformation	ComputedGainFactors		RBSB-087
– Reference TFC ID	0		RBSB-088
– ctfc6	13		RBSB-089
-powerOffsetInformation(OP)			RBSB-090
-gainFactorInformation	ComputedGainFactors		RBSB-091
– Reference TFC ID	0		RBSB-092
– ctfc6	3		RBSB-093
-powerOffsetInformation(OP)			RBSB-094
-gainFactorInformation	ComputedGainFactors		RBSB-095
– Reference TFC ID	0		RBSB-096
– ctfc6	14		RBSB-097
-powerOffsetInformation(OP)			RBSB-098
-gainFactorInformation	ComputedGainFactors		RBSB-099
– Reference TFC ID	0		RBSB-100
– ctfc6	4		RBSB-101
-powerOffsetInformation(OP)			RBSB-102
-gainFactorInformation	ComputedGainFactors		RBSB-103
– Reference TFC ID	0		RBSB-104
– ctfc6	15		RBSB-105
-powerOffsetInformation(OP)			RBSB-106
-gainFactorInformation	ComputedGainFactors		RBSB-107
– Reference TFC ID	0		RBSB-108
– ctfc6	5		RBSB-109
-powerOffsetInformation(OP)			RBSB-110
-gainFactorInformation	ComputedGainFactors		RBSB-111
– Reference TFC ID	0		RBSB-112
– ctfc6	16		RBSB-113
-powerOffsetInformation(OP)			RBSB-114
-gainFactorInformation	ComputedGainFactors		RBSB-115
– Reference TFC ID	0		RBSB-116
– ctfc6	6		RBSB-117
-powerOffsetInformation(OP)			RBSB-118
-gainFactorInformation	ComputedGainFactors		RBSB-119
– Reference TFC ID	1		RBSB-120
– ctfc6	17		RBSB-121
-powerOffsetInformation(OP)			RBSB-122
-gainFactorInformation	SignalledGainFactors		RBSB-123
-modeSpecificInfo	Fdd		RBSB-124
-fdd			RBSB-125
– Gain factor ßc	11		RBSB-126
– Gain factor ßd	15		RBSB-127
– Reference TFC ID	1		RBSB-128
– ctfc6	7		RBSB-129
-powerOffsetInformation(OP)			RBSB-130
-gainFactorInformation	ComputedGainFactors		RBSB-131
– Reference TFC ID	1		RBSB-132
– ctfc6	18		RBSB-133
-powerOffsetInformation(OP)			RBSB-134
-gainFactorInformation	ComputedGainFactors		RBSB-135
– Reference TFC ID	1		RBSB-136
– ctfc6	8		RBSB-137
-powerOffsetInformation(OP)			RBSB-138
-gainFactorInformation	ComputedGainFactors		RBSB-139
– Reference TFC ID	1		RBSB-140
– ctfc6	19		RBSB-141
-powerOffsetInformation(OP)			RBSB-142
-gainFactorInformation	ComputedGainFactors		RBSB-143
– Reference TFC ID	1		RBSB-144
– ctfc6	9		RBSB-145
-powerOffsetInformation(OP)			RBSB-146
-gainFactorInformation	ComputedGainFactors		RBSB-147
– Reference TFC ID	1		RBSB-148
– ctfc6	20		RBSB-149
-powerOffsetInformation(OP)			RBSB-150
-gainFactorInformation	ComputedGainFactors		RBSB-151
– Reference TFC ID	1		RBSB-152
– ctfc6	10		RBSB-153
-powerOffsetInformation(OP)			RBSB-154
-gainFactorInformation	ComputedGainFactors		RBSB-155
– Reference TFC ID	1		RBSB-156
– ctfc6	21		RBSB-157
-powerOffsetInformation(OP)			RBSB-158
-gainFactorInformation	ComputedGainFactors		RBSB-159
– Reference TFC ID	1		RBSB-160
Added or Reconfigured UL TrCH information list	1		RBSB-161
– Added or Reconfigured UL TrCH information			RBSB-162
– Uplink transport channel type	DCH		RBSB-163
– UL Transport channel identity	1		RBSB-164
– TFS			RBSB-165
– CHOICE Transport channel type	Dedicated transport channels		RBSB-166
-DedicatedDynamicTF-Info			RBSB-167
RLC size	256		RBSB-168
-numberOfTbSizeList			RBSB-169
-NumberOfTransportBlocks	Zero		RBSB-170
-NumberOfTransportBlocks	One		RBSB-171
– Choice Logical channel List	ALL		RBSB-172
RLC size	216		RBSB-173
-numberOfTbSizeList			RBSB-174
-NumberOfTransportBlocks	One		RBSB-175
– Choice Logical channel List	ALL		RBSB-176
RLC size	171		RBSB-177
-numberOfTbSizeList			RBSB-178
-NumberOfTransportBlocks	One		RBSB-179
– Choice Logical channel List	ALL		RBSB-180
RLC size	160		RBSB-181
-numberOfTbSizeList			RBSB-182
-NumberOfTransportBlocks	One		RBSB-183
– Choice Logical channel List	ALL		RBSB-184
RLC size	146		RBSB-185
-numberOfTbSizeList			RBSB-186
-NumberOfTransportBlocks	One		RBSB-187
– Choice Logical channel List	ALL		RBSB-188
RLC size	130		RBSB-189
-numberOfTbSizeList			RBSB-190
-NumberOfTransportBlocks	One		RBSB-191
– Choice Logical channel List	ALL		RBSB-192
RLC size	115		RBSB-193
-numberOfTbSizeList			RBSB-194
-NumberOfTransportBlocks	One		RBSB-195
– Choice Logical channel List	ALL		RBSB-196
RLC size	107		RBSB-197
-numberOfTbSizeList			RBSB-198
-NumberOfTransportBlocks	One		RBSB-199
– Choice Logical channel List	ALL		RBSB-200
RLC size	51		RBSB-201
-numberOfTbSizeList			RBSB-202
-NumberOfTransportBlocks	One		RBSB-203
– Choice Logical channel List	ALL		RBSB-204
RLC size	12		RBSB-205
-numberOfTbSizeList			RBSB-206
-NumberOfTransportBlocks	One		RBSB-207
– Choice Logical channel List	ALL		RBSB-208
-Semistatic Transport Format Information			RBSB-209
-Transmission Time interval	20 ms		RBSB-210
-channelCodingType	Convolutional		RBSB-211
-convolutional	1/3		RBSB-212
– Rate matching attribute	256		RBSB-213
– CRC size	0		RBSB-214
DL Transport channel information common for all transport channel			RBSB-215
– SCCPCH TFCS	Not Present		RBSB-216
– CHOICE mode	FDD		RBSB-217
– CHOICE DL parameters	Explicit		RBSB-218
– DL DCH TFCS			RBSB-219
– CHOICE TFCI signalling	Normal		RBSB-220
– TFCI Field 1 information			RBSB-221
– CHOICE TFCS representation	Complete reconfiguration		RBSB-222
– TFCS complete reconfigure information			RBSB-223
– CHOICE CTFC Size	Ctfc6Bit		RBSB-224
– ctfc6Bit	18		RBSB-225
– ctfc6	9		RBSB-226
– ctfc6	0		RBSB-227
– ctfc6	10		RBSB-228
– ctfc6	1		RBSB-229
– ctfc6	11		RBSB-230
– ctfc6	2		RBSB-231
– ctfc6	12		RBSB-232
– ctfc6	3		RBSB-233
– ctfc6	13		RBSB-234
– ctfc6	4		RBSB-235
– ctfc6	14		RBSB-236
– ctfc6	5		RBSB-237
– ctfc6	15		RBSB-238
– ctfc6	6		RBSB-239
– ctfc6	16		RBSB-240
– ctfc6	7		RBSB-241
– ctfc6	17		RBSB-242
– ctfc6	8		RBSB-243
Deleted DL TrCH information	Not Present		RBSB-244
Added or Reconfigured DL TrCH information list	1		RBSB-245
– Added or Reconfigured DL TrCH information			RBSB-246
– Downlink transport channel type	DCH		RBSB-247
– DL Transport channel identity	6		RBSB-248
– CHOICE DL parameters	Explicit		RBSB-249
– TFS			RBSB-250
– CHOICE Transport channel type	Dedicated transport channels		RBSB-251
-DedicatedDynamicTF-Info			RBSB-252
RLC size	244		RBSB-253
-numberOfTbSizeList			RBSB-254
-NumberOfTransportBlocks	One		RBSB-255
– Choice Logical channel List	ALL		RBSB-256
RLC size	204		RBSB-257
-numberOfTbSizeList			RBSB-258
-NumberOfTransportBlocks	One		RBSB-259
– Choice Logical channel List	ALL		RBSB-260
RLC size	159		RBSB-261
-numberOfTbSizeList			RBSB-262
-NumberOfTransportBlocks	One		RBSB-263
– Choice Logical channel List	ALL		RBSB-264
RLC size	148		RBSB-265
-numberOfTbSizeList			RBSB-266
-NumberOfTransportBlocks	One		RBSB-267
– Choice Logical channel List	ALL		RBSB-268
RLC size	134		RBSB-269
-numberOfTbSizeList			RBSB-270
-NumberOfTransportBlocks	One		RBSB-271
– Choice Logical channel List	ALL		RBSB-272
RLC size	118		RBSB-273
-numberOfTbSizeList			RBSB-274
-NumberOfTransportBlocks	One		RBSB-275
– Choice Logical channel List	ALL		RBSB-276
RLC size	103		RBSB-277
-numberOfTbSizeList			RBSB-278
-NumberOfTransportBlocks	One		RBSB-279
– Choice Logical channel List	ALL		RBSB-280
RLC size	95		RBSB-281
-numberOfTbSizeList			RBSB-282
-NumberOfTransportBlocks	One		RBSB-283
– Choice Logical channel List	ALL		RBSB-284
RLC size	39		RBSB-285
-numberOfTbSizeList			RBSB-286
-NumberOfTransportBlocks	One		RBSB-287
– Choice Logical channel List	ALL		RBSB-288
-Semistatic Transport Format Information			RBSB-289
-Transmission Time interval	20 ms		RBSB-290
-channelCodingType	Convolutional		RBSB-291
-convolutional	1/3		RBSB-292
– Rate matching attribute	256		RBSB-293
– CRC size	12		RBSB-294
– DCH quality target			RBSB-295
– BLER Quality value	-20 (-2.0)		RBSB-296
– Transparent mode signalling info	Not Present		RBSB-297
Frequency info	Not Present		RBSB-298
Multi-frequency Info	Not present	Rel-7	RBSB-299
DTX-DRX timing information	Not present	Rel-7	RBSB-300
DRX Information	Not present	Rel-7	RBSB-301
HS-SCCH less Information	Not present	Rel-7	RBSB-302
MIMO parameters	Not present	Rel-7	RBSB-303
Maximum allowed UL TX power	33 dBm		RBSB-304
CHOICE channel requirement	Uplink DPCH info	Rel-5 and earlier	RBSB-305
Uplink DPCH info		Rel-6	RBSB-306
– Uplink DPCH power control info			RBSB-307
– DPCCH power offset	-40 (-80dB) IE value will have no effect on the UE UL power when closed loop power control is active		RBSB-308
– PC Preamble	1 frame		RBSB-309
– SRB delay	7 frames		RBSB-310
– Power Control Algorithm	Algorithm1		RBSB-311
– TPC step size	0 (1dB)		RBSB-312
– ACK	Not Present	Rel-5	RBSB-313
– NACK	Not Present	Rel-5	RBSB-314
– Ack-Nack repetition factor	Not Present	Rel-5	RBSB-315
– Scrambling code type	Long		RBSB-316
– Scrambling code number	0		RBSB-317
– Number of DPDCH	1		RBSB-318
– spreading factor	64		RBSB-319
– TFCI existence	TRUE		RBSB-320
– Number of FBI bit	Not Present(0)		RBSB-321
– Puncturing Limit	1		RBSB-322
CHOICE Mode	FDD	R99 and Rel-4 only	RBSB-323
– Downlink PDSCH information	Not Present(0)	R99 and Rel-4 only	RBSB-324
E-DCH Info	Not Present	Rel-6	RBSB-325
Downlink HS-PDSCH Information	Not Present	Rel-5	RBSB-326
Downlink information common for all radio links			RBSB-327
– Downlink DPCH info common for all RL	FDD		RBSB-328
– Timing indicator	Maintain		RBSB-329
– CFN-targetSFN frame offset	Not Present		RBSB-330
– Downlink DPCH power control information			RBSB-331
– DPC mode	0 (single)		RBSB-332
– CHOICE mode	FDD		RBSB-333
– Power offset PPilot-DPDCH	0		RBSB-334
– DL rate matching restriction information	Not Present		RBSB-335
– Spreading factor	128		RBSB-336
– Number of bits for Pilot bits(SF=128,256)	4		RBSB-337
– Fixed or Flexible Position	Fixed		RBSB-338
– TFCI existence	FALSE		RBSB-339
– DPCH compressed mode info	Not Present		RBSB-340
– TX Diversity mode	None		RBSB-341
– SSDT information	Not Present	R99 and Rel-4 only	RBSB-342
– Default DPCH Offset Value	Not Present		RBSB-343
Downlink information for each radio link list			RBSB-344
– Primary CPICH info			RBSB-345
– Primary scrambling code	Reference to clause 6.1 "Default settings (FDD)"		RBSB-346
– PDSCH with SHO DCH info	Not Present	R99 and Rel-4 only	RBSB-347
– PDSCH code mapping	Not Present	R99 and Rel-4 only	RBSB-348
– Downlink DPCH info for each RL			RBSB-349
– Primary CPICH usage for channel estimation	Primary CPICH may be used		RBSB-350
– DPCH frame offset	Set to value Default DPCH Offset Value (as currently stored in SS) mod 38 400		RBSB-351
– Secondary CPICH info	Not Present		RBSB-352
– DL channelisation code			RBSB-353
– Secondary scrambling code	Not Present		RBSB-354
– Spreading factor	128		RBSB-355
– Code number	96		RBSB-356
– Scrambling code change	No change		RBSB-357
– TPC combination index	0		RBSB-358
– SSDT Cell Identity	Not Present	R99 and Rel-4 only	RBSB-359
– Closed loop timing adjustment mode	Not Present		RBSB-360
– SCCPCH information for FACH	Not Present	R99 and Rel-4 only	RBSB-361
MBMS PL Service Restriction Information	Not Present	Rel-6	RBSB-362

Contents of RADIO BEARER SETUP message: AM or UM (E-DCH and HSDPA)

Information Element	Condition	Value/remark	Version	Index
Message Type	A1, A2, A3			RBSE-001
RRC transaction identifier		Arbitrarily selects an integer between 0 and 3		RBSE-002
Integrity check info				RBSE-003
– message authentication code		SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.		RBSE-004
– RRC message sequence number		SS provides the value of this IE, from its internal counter.		RBSE-005
Integrity protection mode info		Not Present		RBSE-006
Ciphering mode info		Not Present		RBSE-007
Activation time	A1	Not Present		RBSE-008
Activation time	A2, A3	(256+CFN-(CFN MOD 8 + 8))MOD 256		RBSE-009
New U-RNTI	A1, A2, A3	Not Present		RBSE-010
New C-RNTI		Not Present		RBSE-011
New DSCH-RNTI		Not Present	R99 and Rel-4 only	RBSE-012
New H-RNTI		‘1010 1010 1010 1010’	Rel-5	RBSE-013
New Primary E-RNTI		‘1010 1010 1010 1010’	Rel-6	RBSE-014
New Secondary E-RNTI		Not Present	Rel-6	RBSE-015
RRC State indicator		CELL_DCH		RBSE-016
UTRAN DRX cycle length coefficient		Not Present		RBSE-017
CN information info		Not Present		RBSE-018
URA identity		Not Present		RBSE-019
CHOICE specification mode		Complete specification	Rel-6	RBSE-020
– Signalling RB information to setup		Not Present		RBSE-021
– RAB information for setup list				RBSE-022
– RAB information for setup				RBSE-023
– RAB info		(high-speed UM DTCH for PS domain)		RBSE-024
– RAB identity		0000 0110B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBSE-025
– CN domain identity		PS domain		RBSE-026
– NAS Synchronization Indicator		Not Present		RBSE-027
– Re-establishment timer		useT315		RBSE-028
– RB information to setup				RBSE-029
– RB identity		25		RBSE-030
– PDCP info		Not present		RBSE-031
– CHOICE RLC info type		RLC info		RBSE-032
– CHOICE Uplink RLC mode		UM RLC		RBSE-033
– Transmission RLC discard		Not present		RBSE-034
– CHOICE Downlink RLC mode		UM RLC		RBSE-035
– DL UM RLC LI size		Selected with DL UM RLC data size	Rel-5	RBSE-036
– DL Reception Window Size		Not present	Rel-6	RBSE-037
– One sided RLC re-establishment		FALSE		RBSE-038
– Alternative E-bit interpretation		Not present	Rel-6	RBSE-039
– RB mapping info				RBSE-040
– Information for each multiplexing option		1 RBMuxOptions		RBSE-041
– RLC logical channel mapping indicator		Not Present		RBSE-042
– Number of uplink RLC logical channels		1		RBSE-043
– Uplink transport channel type		E-DCH		RBSE-044
– Logical channel identity		7		RBSE-045
– E-DCH MAC-d flow identity		2		RBSE-046
– DDI		5		RBSE-047
– RLC PDU size list		1 RLC PDU size		RBSE-048
– RLC PDU size		336 bits		RBSE-049
– Include in scheduling info		TRUE		RBSE-050
– MAC logical channel priority		8		RBSE-051
– Downlink RLC logical channel info				RBSE-052
– Number of downlink RLC logical channels		1		RBSE-053
– Downlink transport channel type		HS-DSCH		RBSE-054
– DL DCH Transport channel identity		Not Present		RBSE-055
– DL DSCH Transport channel identity		Not Present		RBSE-056
– CHOICE DL MAC header type		MAC-hs	Rel-7	RBSE-057
– DL HS-DSCH MAC-d flow identity		0		RBSE-058
– Logical channel identity		Not Present		RBSE-059
RB information to reconfigure list		Not Present	Rel-6	RBSE-060
RB information to be affected	A1	Not Present		RBSE-061
RB information to be affected	A2, A3			RBSE-062
– RB identity		1 (UM DCCH for RRC)		RBSE-063
– RB mapping info				RBSE-064
– Information for each multiplexing option		1 RBMuxOption		RBSE-065
– RLC logical channel mapping indicator		Not Present		RBSE-066
– Number of uplink RLC logical channels		1		RBSE-067
– Uplink transport channel type		E-DCH		RBSE-068
– Logical channel identity		1		RBSE-069
– E-DCH MAC-d flow identity		1		RBSE-070
– DDI		1		RBSE-071
– RLC PDU size list		1 RLC PDU size		RBSE-072
– RLC PDU size		96 bits		RBSE-073
– Include in scheduling info		FALSE		RBSE-074
– MAC logical channel priority		1		RBSE-075
– Downlink RLC logical channel info				RBSE-076
– Number of RLC logical channels		1		RBSE-077
– Downlink transport channel type		DCH		RBSE-078
– DL DCH Transport channel identity		10		RBSE-079
– DL DSCH Transport channel identity		Not Present		RBSE-080
– Logical channel identity		1		RBSE-081
– RB identity		2 (AM DCCH for RRC)		RBSE-082
– RB mapping info				RBSE-083
– Information for each multiplexing option		1 RBMuxOption		RBSE-084
– RLC logical channel mapping indicator		Not Present		RBSE-085
– Number of uplink RLC logical channels		1		RBSE-086
– Uplink transport channel type		E-DCH		RBSE-087
– Logical channel identity		2		RBSE-088
– E-DCH MAC-d flow identity		1		RBSE-089
– DDI		2		RBSE-090
– RLC PDU size list		1 RLC PDU size		RBSE-091
– RLC PDU size		96 bits		RBSE-092
– Include in scheduling info		FALSE		RBSE-093
– MAC logical channel priority		2		RBSE-094
– Downlink RLC logical channel info				RBSE-095
– Number of RLC logical channels		1		RBSE-096
– Downlink transport channel type		DCH		RBSE-097
– DL DCH Transport channel identity		10		RBSE-098
– DL DSCH Transport channel identity		Not Present		RBSE-099
– Logical channel identity		2		RBSE-100
– RB identity		3 (AM DCCH for NAS High Priority)		RBSE-101
– RB mapping info				RBSE-102
– Information for each multiplexing option		1 RBMuxOption		RBSE-103
– RLC logical channel mapping indicator		Not Present		RBSE-104
– Number of uplink RLC logical channels		1		RBSE-105
– Uplink transport channel type		E-DCH		RBSE-106
– Logical channel identity		3		RBSE-107
– E-DCH MAC-d flow identity		1		RBSE-108
– DDI		3		RBSE-109
– RLC PDU size list		1 RLC PDU size		RBSE-110
– RLC PDU size		96 bits		RBSE-111
– Include in scheduling info		FALSE		RBSE-112
– MAC logical channel priority		3		RBSE-113
– Downlink RLC logical channel info				RBSE-114
– Number of RLC logical channels		1		RBSE-115
– Downlink transport channel type		DCH		RBSE-116
– DL DCH Transport channel identity		10		RBSE-117
– DL DSCH Transport channel identity		Not Present		RBSE-118
– Logical channel identity		3		RBSE-119
– RB identity		4 (AM DCCH for NAS Low Priority)		RBSE-120
– RB mapping info				RBSE-121
– Information for each multiplexing option		1 RBMuxOption		RBSE-122
– RLC logical channel mapping indicator		Not Present		RBSE-123
– Number of uplink RLC logical channels		1		RBSE-124
– Uplink transport channel type		E-DCH		RBSE-125
– Logical channel identity		4		RBSE-126
– E-DCH MAC-d flow identity		1		RBSE-127
– DDI		4		RBSE-128
– RLC PDU size list		1 RLC PDU size		RBSE-129
– RLC PDU size		96 bits		RBSE-130
– Include in scheduling info		FALSE		RBSE-131
– MAC logical channel priority		4		RBSE-132
– Downlink RLC logical channel info				RBSE-133
– Number of RLC logical channels		1		RBSE-134
– Downlink transport channel type		DCH		RBSE-135
– DL DCH Transport channel identity		10		RBSE-136
– DL DSCH Transport channel identity		Not Present		RBSE-137
– Logical channel identity		4		RBSE-138
Downlink counter synchronization info	A1, A2, A3	Not Present		RBSE-139
PDCP ROHC target mode		Not Present	Rel-5	RBSE-140
UL Transport channel information for all transport channels		Not Present		RBSE-141
Deleted UL TrCH information	A1	Not Present		RBSE-142
Deleted UL TrCH information	A2, A3			RBSE-143
– Uplink transport channel type		DCH		RBSE-144
– UL transport channel identity		5		RBSE-145
Added or Reconfigured TrCH information list	A1	1 TrCH added		RBSE-146
– Added or Reconfigured UL TrCH information		1 E-DCH added		RBSE-147
– Uplink transport channel type		E-DCH		RBSE-148
– CHOICE UL parameters		E-DCH		RBSE-149
– E-DCH Transmission Time Interval		10 ms		RBSE-150
– HARQ info for E-DCH				RBSE-151
– HARQ RV Configuration		Rv0		RBSE-152
– Added or reconfigured E-DCH MAC-d flow				RBSE-153
– E-DCH MAC-d flow identity		2		RBSE-154
– E-DCH MAC-d flow power offset		0		RBSE-155
– E-DCH MAC-d flow maximum number of retransmissions		7		RBSE-156
– E-DCH MAC-d flow multiplexing list		Not Present		RBSE-157
– CHOICE transmission grant type		Scheduled grant info		RBSE-158
Added or Reconfigured UL TrCH information list	A2, A3	1 TrCH added		RBSE-159
– Added or Reconfigured UL TrCH information		1 E-DCH added with one DCCH MAC-d flow and one DTCH MAC-d flow		RBSE-160
– Uplink transport channel type		E-DCH		RBSE-161
– CHOICE UL parameters		E-DCH		RBSE-162
– E-DCH Transmission Time Interval		(A2: 2ms), (A3 10ms)		RBSE-163
– HARQ info for E-DCH				RBSE-164
– HARQ RV Configuration		Rv0		RBSE-165
– Added or reconfigured E-DCH MAC-d flow		(for DCCH)		RBSE-166
– E-DCH MAC-d flow identity		1		RBSE-167
– E-DCH MAC-d flow power offset		0		RBSE-168
– E-DCH MAC-d flow maximum number of retransmissions		7		RBSE-169
– E-DCH MAC-d flow multiplexing list		Not Present		RBSE-170
– CHOICE transmission grant type		Non-scheduled grant info		RBSE-171
– Max MAC-e PDU contents size		114 bits		RBSE-172
– 2 ms non-scheduled transmission grant HARQ process allocation		Not Present		RBSE-173
– Added or reconfigured E-DCH MAC-d flow		(for DTCH)		RBSE-174
– E-DCH MAC-d flow identity		2		RBSE-175
– E-DCH MAC-d flow power offset		0		RBSE-176
– E-DCH MAC-d flow maximum number of retransmissions		7		RBSE-177
– E-DCH MAC-d flow multiplexing list		Not Present		RBSE-178
– CHOICE transmission grant type		Scheduled grant info		RBSE-179
CHOICE mode	A1, A2, A3	Not Present	R99 and Rel-4 only	RBSE-180
DL Transport channel information common for all transport channels	A1, A3	Not Present		RBSE-181
DL Transport channel information common for all transport channels	A2			RBSE-182
– SCCPCH TFCS		Not Present		RBSE-183
– CHOICE mode		FDD		RBSE-184
– CHOICE DL parameters		Explicit		RBSE-185
– DL DCH TFCS				RBSE-186
– CHOICE TFCI Signalling		Normal		RBSE-187
– TFCI Field 1 Information				RBSE-188
– CHOICE TFCS representation		Complete reconfiguration		RBSE-189
– TFCS complete reconfigure				RBSE-190
– CHOICE CTFC Size		2 bit CTFC		RBSE-191
– CTFC information		2 TFCs		RBSE-192
– 2bit CTFC		0		RBSE-193
– Power offset Information				RBSE-194
– CHOICE Gain Factors		computedGainFactors		RBSE-195
– Reference TFC ID		0		RBSE-196
– Power offset Pp-m		Not Present		RBSE-197
– 2bit CTFC		1		RBSE-198
– Power offset Information				RBSE-199
– CHOICE Gain Factors		signalledGainFactors		RBSE-200
– CHOICE mode		FDD		RBSE-201
– Gain factor ßc		15		RBSE-202
– Gain factor ßd		15		RBSE-203
– Reference TFC ID		0		RBSE-204
– CHOICE mode		FDD		RBSE-205
– Power offset Pp-m		Not Present		RBSE-206
Deleted TrCH information list	A1, A2, A3	Not Present		RBSE-207
Added or Reconfigured TrCH information list	A1, A3	1 TrCH added		RBSE-208
– Added or Reconfigured DL TrCH information		HS-DSCH for DTCH added		RBSE-209
– Downlink transport channel type		HS-DSCH		RBSE-210
– DL Transport channel identity		Not Present		RBSE-211
– CHOICE DL parameters		HS-DSCH		RBSE-212
– HARQ Info				RBSE-213
– Number of Processes		Reference to TS34.121 [2] Annex C Fixed Reference Channels		RBSE-214
– CHOICE Memory Partitioning		Explicit		RBSE-215
– Memory size		Reference to TS34.121 [2] Annex C Fixed Reference Channels parameter “Number of HARQ Processes".		RBSE-216
– Process Memory Size		Reference to TS34.121 [2] Annex C Fixed Reference Channels parameter “Number of SML’s per HARQ Proc.”.		RBSE-217
– Additional memory sizes for MIMO		Not Present	Rel-7	RBSE-218
– CHOICE DL MAC header type		MAC-hs	Rel-7	RBSE-219
– Added or reconfigured MAC-d flow				RBSE-220
– MAC-hs queue to add or reconfigure list		(one queue)		RBSE-221
– MAC-hs queue Id		0		RBSE-222
– MAC-d Flow Identity		0		RBSE-223
– T1		50		RBSE-224
– MAC-hs window size		16		RBSE-225
– MAC-d PDU size Info				RBSE-226
– MAC-d PDU size		Reference to TS34.121 [2] Annex C Fixed Reference Channels		RBSE-227
– MAC-d PDU size index		0		RBSE-228
– MAC-hs queue to delete list		Not present		RBSE-229
– DCH quality target		Not present		RBSE-230
Added or Reconfigured DL TrCH information	A2	2 TrCHs (DCH for DCCH and HS-DSCH for DTCH)		RBSE-231
				RBSE-232
– Downlink transport channel type		DCH		RBSE-233
– DL Transport channel identity		10		RBSE-234
– CHOICE DL parameters		Explicit		RBSE-235
– TFS				RBSE-236
– CHOICE Transport channel type		Dedicated transport channels		RBSE-237
– Dynamic Transport format information				RBSE-238
– RLC Size		96 bits		RBSE-239
– Number of TBs and TTI List		2		RBSE-240
– Transmission Time Interval		Not Present		RBSE-241
– Number of Transport blocks		0		RBSE-242
– Transmission Time Interval		Not Present		RBSE-243
– Number of Transport blocks		1		RBSE-244
– CHOICE Logical channel list		ALL		RBSE-245
– Semi-static Transport Format information				RBSE-246
– Transmission time interval		40		RBSE-247
– Type of channel coding		Convolutional		RBSE-248
– Coding Rate		1/3		RBSE-249
– Rate matching attribute		256		RBSE-250
– CRC size		12		RBSE-251
– DCH quality target				RBSE-252
– BLER Quality value		-20 (-2.0)		RBSE-253
– Downlink transport channel type		HS-DSCH		RBSE-254
– DL Transport channel identity		Not Present		RBSE-255
– CHOICE DL parameters		HS-DSCH		RBSE-256
– HARQ Info				RBSE-257
– Number of Processes		Reference to TS34.121 [2] Annex C Fixed Reference Channels		RBSE-258
– CHOICE Memory Partitioning		Explicit		RBSE-259
– Memory size		Reference to TS34.121 [2] Annex C Fixed Reference Channels parameter “Number of HARQ Processes".		RBSE-260
– Process Memory Size		Reference to TS34.121 [2] Annex C Fixed Reference Channels parameter “Number of SML’s per HARQ Proc.”.		RBSE-261
– Additional memory sizes for MIMO		Not Present	Rel-7	RBSE-262
– CHOICE DL MAC header type		MAC-hs	Rel-7	RBSE-263
– Added or reconfigured MAC-d flow				RBSE-264
– MAC-hs queue to add or reconfigure list		(one queue)		RBSE-265
– MAC-hs queue Id		0		RBSE-266
– MAC-d Flow Identity		0		RBSE-267
– T1		50		RBSE-268
– MAC-hs window size		16		RBSE-269
– MAC-d PDU size Info				RBSE-270
– MAC-d PDU size		Reference to TS34.121 [2] Annex C Fixed Reference Channels		RBSE-271
– MAC-d PDU size index		0		RBSE-272
– MAC-hs queue to delete list		Not present		RBSE-273
– DCH quality target		Not present		RBSE-274
Frequency info	A1, A2, A3	Not present		RBSE-275
Multi-frequency Info		Not present	Rel-7	RBSE-276
DTX-DRX timing information		Not present	Rel-7	RBSE-277
DRX Information		Not present	Rel-7	RBSE-278
HS-SCCH less Information		Not present	Rel-7	RBSE-279
MIMO parameters		Not present	Rel-7	RBSE-280
Maximum allowed UL TX power		33dBm		RBSE-281
CHOICE channel requirement		Uplink DPCH info	Rel-5 and earlier	RBSE-282
Uplink DPCH info			Rel-6	RBSE-283
– Uplink DPCH power control info				RBSE-284
– DPCCH power offset		-40 (-80dB)		RBSE-285
– PC Preamble		1 frame		RBSE-286
– SRB delay		7 frames		RBSE-287
– Power Control Algorithm		Algorithm1		RBSE-288
– TPC step size		0 (1dB)		RBSE-289
– ACK		3		RBSE-290
– NACK		3		RBSE-291
– Ack-Nack repetition factor		1		RBSE-292
– HARQ_preamble_mode		0		RBSE-293
– Scrambling code type		Long		RBSE-294
– Scrambling code number		0 (0 to 16777215)		RBSE-295
– Number of DPDCH	A1	Not Present(1)		RBSE-296
– spreading factor		Reference to clause 6.10 Parameter Set		RBSE-297
– TFCI existence		Reference to clause 6.10 Parameter Set		RBSE-298
– Number of FBI bit		Reference to clause 6.10 Parameter Set		RBSE-299
– Puncturing Limit		Reference to clause 6.10 Parameter Set		RBSE-300
– Number of DPDCH	A2, A3	0		RBSE-301
– spreading factor		Not present		RBSE-302
– TFCI existence		FALSE		RBSE-303
– Number of FBI bit		Not present		RBSE-304
– Puncturing Limit		Not present		RBSE-305
E-DCH info	A1, A2, A3		Rel-6	RBSE-306
– MAC-es/e reset indicator		TRUE		RBSE-307
– E-DPCCH info				RBSE-308
– E-DPCCH/DPCCH power offset		0		RBSE-309
– Happy bit delay condition		100 ms		RBSE-310
– E-TFCI boost info		Not present	Rel-7	RBSE-311
– E-TFCI BetaED SwitchE-DPDCH power interpolation		Not present	Rel-7	RBSE-312
– E-DPDCH info	A1, A3			RBSE-313
– E-TFCI table index		0		RBSE-314
– E-DCH minimum set E-TFCI		9		RBSE-315
– Reference E-TFCIs		1 E-TFCI		RBSE-316
– Reference E-TFCI		11		RBSE-317
– Reference E-TFCI PO		4		RBSE-318
– Maximum channelisation codes		2sf4		RBSE-319
– PLnon-max		0.84		RBSE-320
– Scheduling Information Configuration				RBSE-321
– Periodicity for Scheduling Info – no grant		Not present		RBSE-322
– Periodicity for Scheduling Info – grant		Not present		RBSE-323
– Power Offset for Scheduling Info		0		RBSE-324
– 3-Index-Step Threshold		Not present		RBSE-325
– 2-Index-Step Threshold		Not present		RBSE-326
– E-DPDCH info	A2			RBSE-327
– E-TFCI table index		0		RBSE-328
– E-DCH minimum set E-TFCI		9		RBSE-329
– Reference E-TFCIs		2 E-TFCI		RBSE-330
– Reference E-TFCI		11		RBSE-331
– Reference E-TFCI PO		4		RBSE-332
– Reference E-TFCI		83		RBSE-333
– Reference E-TFCI PO		16		RBSE-334
– Maximum channelisation codes		2sf2and2sf4		RBSE-335
– PLnon-max		0.84		RBSE-336
– Scheduling Information Configuration				RBSE-337
– Periodicity for Scheduling Info – no grant		Not present		RBSE-338
– Periodicity for Scheduling Info – grant		Not present		RBSE-339
– Power Offset for Scheduling Info		0		RBSE-340
– 3-Index-Step Threshold		Not present		RBSE-341
– 2-Index-Step Threshold		Not present		RBSE-342
– Scheduled Transmission configuration	A1, A2, A3			RBSE-343
– 2ms scheduled transmission grant HARQ process allocation		Not present		RBSE-344
– Serving Grant		Not present		RBSE-345
– UL 16QAM settings		Not present	Rel-7	RBSE-346
CHOICE Mode		FDD	R99 and Rel-4 only	RBSE-347
– Downlink PDSCH information		Not Present	R99 and Rel-4 only	RBSE-348
Downlink HS-PDSCH Information				RBSE-349
– HS-SCCH Info				RBSE-350
– CHOICE mode		FDD		RBSE-351
– DL Scrambling Code		Not present		RBSE-352
– HS-SCCH Channelisation Code Information				RBSE-353
– HS-SCCH Channelisation Code		2		RBSE-354
– HS-SCCH Channelisation Code		3		RBSE-355
– Measurement Feedback Info				RBSE-356
– CHOICE mode		FDD		RBSE-357
– POhsdsch		6 dB		RBSE-358
– CQI Feedback cycle, k		2 ms		RBSE-359
– CQI repetition factor		1		RBSE-360
– CQI		5 (corresponds to 0dB in relative power offset)		RBSE-361
– CHOICE mode		FDD		RBSE-362
– Downlink 64QAM configured		Not Present	Rel-7	RBSE-363
Downlink information common for all radio links	A1, A3	Not Present		RBSE-364
Downlink information common for all radio links	A2			RBSE-365
– Downlink DPCH info common for all RL				RBSE-366
– Timing indicator		Maintain		RBSE-367
– CFN-targetSFN frame offset		Not Present		RBSE-368
– Downlink DPCH power control information				RBSE-369
– DPC mode		0 (single)		RBSE-370
– CHOICE mode		FDD		RBSE-371
– Power offset PPilot-DPDCH		0		RBSE-372
– DL rate matching restriction information		Not Present		RBSE-373
– Spreading factor		256		RBSE-374
– Fixed or Flexible Position		Fixed		RBSE-375
– TFCI existence		FALSE		RBSE-376
– CHOICE SF		256		RBSE-377
– Number of bits for Pilot bits		8		RBSE-378
– CHOICE mode		FDD		RBSE-379
– DPCH compressed mode info		Not Present		RBSE-380
– TX Diversity mode		None		RBSE-381
– Default DPCH Offset Value		Not Present		RBSE-382
– MAC-hs reset indicator		Not Present		RBSE-383
– Post-verification period		Not Present		RBSE-384
Downlink information for each radio link list	A1, A2, A3			RBSE-385
– Downlink information for each radio link				RBSE-386
– Choice mode		FDD		RBSE-387
– Primary CPICH info				RBSE-388
– Primary scrambling code		Ref. to clause 6.1 "Default settings (FDD)"		RBSE-389
– PDSCH with SHO DCH info		Not Present	R99 and Rel-4 only	RBSE-390
– PDSCH code mapping		Not Present	R99 and Rel-4 only	RBSE-391
– Serving HS-DSCH radio link indicator		TRUE		RBSE-392
– Serving E-DCH radio link indicator		TRUE		RBSE-393
– Downlink DPCH info for each RL				RBSE-394
– CHOICE mode		FDD		RBSE-395
– Primary CPICH usage for channel estimation		Primary CPICH may be used		RBSE-396
– DPCH frame offset		Set to value Default DPCH Offset Value (as currently stored in SS) mod 38 400		RBSE-397
– Secondary CPICH info		Not Present		RBSE-398
– DL channelisation code				RBSE-399
– Secondary scrambling code		Not Present		RBSE-400
– Spreading factor	A1	Reference to clause 6.10 Parameter Set		RBSE-401
– Code number		96		RBSE-402
– Spreading factor	A2, A3	256		RBSE-403
– Code number		192		RBSE-404
– Scrambling code change	A1, A2, A3	No code change		RBSE-405
– TPC combination index		0		RBSE-406
– SSDT Cell Identity		Not Present	R99 and Rel-4 only	RBSE-407
– Closed loop timing adjustment mode		Not Present		RBSE-408
– E-AGCH Info			Rel-6	RBSE-409
– E-AGCH Channelisation Code		14		RBSE-410
– CHOICE E-HICH Information			Rel-6	RBSE-411
– E-HICH Information				RBSE-412
– DL Scrambling code		Not Present (default is primary)		RBSE-413
– Channelisation code		6		RBSE-414
– Signature sequence		1		RBSE-415
– CHOICE E-RGCH Information		Not Present	Rel-6	RBSE-416
– SCCPCH information for FACH		Not Present	R99 and Rel-4 only	RBSE-417
MBMS PL Service Restriction Information		Not Present	Rel-6	RBSE-418

Condition	Explanation
A1	Not using E-DCH 4codes except sub-test 5 in TS 34.121-1 [2] Table C.11.1.3
A2	Using E-DCH 4codes
A3	Sub-test 5 in TS 34.121-1 [2] Table C.11.1.3

Contents of RADIO BEARER SETUP message: AM or UM (HSDPA with F-DPCH)

Information Element	Value/remark	Version	Index
Message Type		Rel-6	RBSF-001
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3		RBSF-002
Integrity check info			RBSF-003
– message authentication code	SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.		RBSF-004
– RRC message sequence number	SS provides the value of this IE, from its internal counter.		RBSF-005
Integrity protection mode info	Not Present		RBSF-006
Ciphering mode info	Not Present		RBSF-007
Activation time	(256+CFN-(CFN MOD 8 + 8))MOD 256		RBSF-008
New U-RNTI	Not Present	Rel-6	RBSF-009
New C-RNTI	Not Present	Rel-6	RBSF-010
New H-RNTI	‘1010 1010 1010 1010’	Rel-6	RBSF-011
New Primary E-RNTI	Not Present	Rel-6	RBSF-012
New Secondary E-RNTI	Not Present	Rel-6	RBSF-013
RRC State indicator	CELL_DCH	Rel-6	RBSF-014
UTRAN DRX cycle length coefficient	Not Present	Rel-6	RBSF-015
CN information info	Not Present		RBSF-016
URA identity	Not Present		RBSF-017
CHOICE Specification mode	Complete specification	Rel-6	RBSF-018
– Signalling RB information to setup	Not Present		RBSF-019
– RAB information for setup			RBSF-020
– RAB info	(high-speed UM DTCH for PS domain)		RBSF-021
– RAB identity	0000 0110B		RBSF-022
– CN domain identity	PS domain		RBSF-023
– NAS Synchronization Indicator	Not Present		RBSF-024
– Re-establishment timer	useT315		RBSF-025
– RB information to setup			RBSF-026
– RB identity	25		RBSF-027
– PDCP info	Not Present		RBSF-028
– CHOICE RLC info type	RLC info		RBSF-029
– CHOICE Uplink RLC mode	Not present		RBSF-030
– CHOICE Downlink RLC mode	UM RLC		RBSF-031
– DL UM RLC LI size	Selected with DL UM RLC data size	Rel-5	RBSF-032
– One sided RLC re-establishment	FALSE	Rel-5	RBSF-033
– RB mapping info			RBSF-034
– Information for each multiplexing option	1 RBMuxOption		RBSF-035
– RLC logical channel mapping indicator	Not Present		RBSF-036
– Number of uplink RLC logical channels	1		RBSF-037
– Downlink RLC logical channel info			RBSF-038
– Number of downlink RLC logical channels	1		RBSF-039
– Downlink transport channel type	HS-DSCH		RBSF-040
– DL DCH Transport channel identity	Not present		RBSF-041
– DL DSCH Transport channel identity	Not present		RBSF-042
– CHOICE DL MAC header type	MAC-hs	Rel-7	RBSF-043
– DL HS-DSCH MAC-d flow identity	1		RBSF-044
– Logical channel identity	Not Present		RBSF-045
RB information to reconfigure list	Not Present	Rel-6	RBSF-046
RB information to be affected		Rel-6	RBSF-047
– RB identity	1 (UM DCCH for RRC)		RBSF-048
– RB mapping info			RBSF-049
– Information for each multiplexing option	1 RBMuxOption		RBSF-050
– RLC logical channel mapping indicator	Not Present		RBSF-051
– Number of uplink RLC logical channels	1		RBSF-052
– Uplink transport channel type	DCH		RBSF-053
– UL Transport channel identity	5		RBSF-054
– Logical channel identity	1		RBSF-055
– CHOICE RLC size list	Configured		RBSF-056
– MAC logical channel priority	1		RBSF-057
– Downlink RLC logical channel info			RBSF-058
– Number of RLC logical channels	1		RBSF-059
– Downlink transport channel type	HS-DSCH		RBSF-060
– DL DCH Transport channel identity	Not present		RBSF-061
– DL DSCH Transport channel identity	Not present		RBSF-062
– CHOICE DL MAC header type	MAC-hs	Rel-7	RBSF-063
– DL HS-DSCH MAC-d flow identity	0		RBSF-064
– Logical channel identity	1		RBSF-065
– RB identity	2 (AM DCCH for RRC)		RBSF-066
– RB mapping info			RBSF-067
– Information for each multiplexing option	1 RBMuxOption		RBSF-068
– RLC logical channel mapping indicator	Not Present		RBSF-069
– Number of uplink RLC logical channels	1		RBSF-070
– Uplink transport channel type	DCH		RBSF-071
– UL Transport channel identity	5		RBSF-072
– Logical channel identity	2		RBSF-073
– CHOICE RLC size list	Configured		RBSF-074
– MAC logical channel priority	2		RBSF-075
– Downlink RLC logical channel info			RBSF-076
– Number of RLC logical channels	1		RBSF-077
– Downlink transport channel type	HS-DSCH		RBSF-078
– DL DCH Transport channel identity	Not Present		RBSF-079
– DL DSCH Transport channel identity	Not Present		RBSF-080
– CHOICE DL MAC header type	MAC-hs	Rel-7	RBSF-081
– DL HS-DSCH MAC-d flow identity	0		RBSF-082
– Logical channel identity	2		RBSF-083
– RB identity	3 (AM DCCH for NAS High Priority)		RBSF-084
– RB mapping info			RBSF-085
– Information for each multiplexing option	1 RBMuxOption		RBSF-086
– RLC logical channel mapping indicator	Not Present		RBSF-087
– Number of uplink RLC logical channels	1		RBSF-088
– Uplink transport channel type	DCH		RBSF-089
– UL Transport channel identity	5		RBSF-090
– Logical channel identity	3		RBSF-091
– CHOICE RLC size list	Configured		RBSF-092
– MAC logical channel priority	3		RBSF-093
– Downlink RLC logical channel info			RBSF-094
– Number of RLC logical channels	1		RBSF-095
– Downlink transport channel type	HS-DSCH		RBSF-096
– DL DCH Transport channel identity	Not Present		RBSF-097
– DL DSCH Transport channel identity	Not Present		RBSF-098
– CHOICE DL MAC header type	MAC-hs	Rel-7	RBSF-099
– DL HS-DSCH MAC-d flow identity	0		RBSF-100
– Logical channel identity	3		RBSF-101
– RB identity	4 (AM DCCH for NAS Low Priority)		RBSF-102
– RB mapping info			RBSF-103
– Information for each multiplexing option	1 RBMuxOption		RBSF-104
– RLC logical channel mapping indicator	Not Present		RBSF-105
– Number of uplink RLC logical channels	1		RBSF-106
– Uplink transport channel type	DCH		RBSF-107
– UL Transport channel identity	5		RBSF-108
– Logical channel identity	4		RBSF-109
– CHOICE RLC size list	Configured		RBSF-110
– MAC logical channel priority	4		RBSF-111
– Downlink RLC logical channel info			RBSF-112
– Number of RLC logical channels	1		RBSF-113
– Downlink transport channel type	HS-DSCH		RBSF-114
– DL DCH Transport channel identity	Not Present		RBSF-115
– DL DSCH Transport channel identity	Not Present		RBSF-116
– CHOICE DL MAC header type	MAC-hs	Rel-7	RBSF-117
– DL HS-DSCH MAC-d flow identity	0		RBSF-118
– Logical channel identity	4		RBSF-119
Downlink counter synchronization info	Not Present	Rel-6	RBSF-120
PDCP ROHC target mode	Not Present	Rel-6	RBSF-121
UL Transport channel information for all transport channels		Rel-6	RBSF-122
– PRACH TFCS	Not Present		RBSF-123
– CHOICE Mode	FDD		RBSF-124
– TFC subset	Not Present		RBSF-125
– UL DCH TFCS			RBSF-126
– CHOICE TFCI signalling	Normal		RBSF-127
– TFCI Field 1 information			RBSF-128
– CHOICE TFCS representation	Complete reconfiguration		RBSF-129
– TFCS complete reconfiguration information			RBSF-130
– CHOICE CTFC Size	2 bit CTFC		RBSF-131
– CTFC information	2 TFCs		RBSF-132
– 2bit CTFC	0		RBSF-133
– Power offset Information			RBSF-134
– CHOICE Gain Factors	computedGainFactors		RBSF-135
– Reference TFC ID	0		RBSF-136
– CHOICE mode	FDD		RBSF-137
– Power offset Pp-m	Not Present		RBSF-138
– 2bit CTFC	1		RBSF-139
– Power offset Information			RBSF-140
– CHOICE Gain Factors	signalledGainFactors		RBSF-141
– CHOICE mode	FDD		RBSF-142
– Gain factor ßc	15		RBSF-143
– Gain factor ßd	15		RBSF-144
– Reference TFC ID	0		RBSF-145
– CHOICE mode	FDD		RBSF-146
– Power offset Pp-m	Not Present		RBSF-147
Deleted UL TrCH information	Not Present	Rel-6	RBSF-148
Added or Reconfigured UL TrCH information		Rel-6	RBSF-149
– Added or Reconfigured UL TrCH information			RBSF-150
– Uplink transport channel type	DCH		RBSF-151
– UL Transport channel identity	5		RBSF-152
– TFS			RBSF-153
– CHOICE Transport channel type	Dedicated transport channels		RBSF-154
– Dynamic Transport Format Information			RBSF-155
– RLC size	96 bits		RBSF-156
– Number of TBs and TTI List	2		RBSF-157
– Transmission Time Interval	Not Present		RBSF-158
– Number of Transport blocks	0		RBSF-159
– Transmission Time Interval	Not Present		RBSF-160
– Number of Transport blocks	1		RBSF-161
– CHOICE Logical channel List	ALL		RBSF-162
– Semi-static Transport Format Information			RBSF-163
– Transmission time interval	40		RBSF-164
– Type of channel coding	Convolutional		RBSF-165
– Coding Rate	1/3		RBSF-166
– Rate matching attribute	256		RBSF-167
– CRC size	12		RBSF-168
DL Transport channel information common for all transport channel	Not Present	Rel-6	RBSF-169
Deleted DL TrCH information		Rel-6	RBSF-170
– Downlink transport channel type	DCH		RBSF-171
– DL Transport channel identity	10		RBSF-172
Added or Reconfigured DL TrCH information	1 TrCH (HS-DSCH for DTCH and DCCH)	Rel-6	RBSF-173
– Downlink transport channel type	HS-DSCH		RBSF-174
– DL Transport channel identity	Not Present		RBSF-175
– CHOICE DL parameters	HS-DSCH		RBSF-176
– HARQ Info			RBSF-177
– Number of Processes	Reference to TS34.121 [2] Annex C Fixed Reference Channels		RBSF-178
– CHOICE Memory Partitioning	Explicit		RBSF-179
– Memory size	Reference to TS34.121 [2] Annex C Fixed Reference Channels parameter “Number of HARQ Processes”.		RBSF-180
– Process Memory Size	Reference to TS34.121 [2] Annex C Fixed Reference Channels parameter “Number of SML’s per HARQ Proc.”.		RBSF-181
– Additional memory sizes for MIMO	Not Present	Rel-7	RBSF-182
– CHOICE DL MAC header type	MAC-hs	Rel-7	RBSF-183
– Added or reconfigured MAC-d flow			RBSF-184
– MAC-hs queue to add or reconfigure list	(two queues)		RBSF-185
– MAC-hs queue Id	0 (for DCCH)		RBSF-186
– MAC-d Flow Identity	0		RBSF-187
– T1	50		RBSF-188
– MAC-hs window size	16		RBSF-189
– MAC-d PDU size Info			RBSF-190
– MAC-d PDU size	100		RBSF-191
– MAC-d PDU size index	0		RBSF-192
– MAC-hs queue Id	1 (for DTCH)		RBSF-193
– MAC-d Flow Identity	1		RBSF-194
– T1	50		RBSF-195
– MAC-hs window size	16		RBSF-196
– MAC-d PDU size Info			RBSF-197
– MAC-d PDU size	Reference to TS34.121 [2] Annex C Fixed Reference Channels		RBSF-198
– MAC-d PDU size index	0		RBSF-199
– MAC-hs queue to delete list	Not present		RBSF-200
– DCH quality target	Not present		RBSF-201
Frequency info	Not present		RBSF-202
Multi-frequency Info	Not present	Rel-7	RBSF-203
DTX-DRX timing information	Not present	Rel-7	RBSF-204
DRX Information	Not present	Rel-7	RBSF-205
HS-SCCH less Information	Not present	Rel-7	RBSF-206
MIMO parameters	Not present	Rel-7	RBSF-207
Maximum allowed UL TX power	33dBm		RBSF-208
Uplink DPCH info		Rel-6	RBSF-209
– Uplink DPCH power control info			RBSF-210
– DPCCH power offset	-40 (-80dB)		RBSF-211
– PC Preamble	1 frame		RBSF-212
– SRB delay	7 frames		RBSF-213
– Power Control Algorithm	Algorithm1		RBSF-214
– TPC step size	0 (1dB)		RBSF-215
– ACK	3		RBSF-216
– NACK	3		RBSF-217
– Ack-Nack repetition factor	1		RBSF-218
– HARQ_preamble_mode	0		RBSF-219
– CHOICE mode	FDD		RBSF-220
– Scrambling code type	Long		RBSF-221
– Scrambling code number	0 (0 to 16777215)		RBSF-222
– Number of DPDCH	Not Present (1)		RBSF-223
– spreading factor	256		RBSF-224
– TFCI existence	TRUE		RBSF-225
– Number of FBI bit	Not Present(0)		RBSF-226
– Puncturing Limit	1		RBSF-227
E-DCH info	Not Present	Rel-6	RBSF-228
Downlink HS-PDSCH Information		Rel-6	RBSF-229
– HS-SCCH Info			RBSF-230
– CHOICE mode	FDD		RBSF-231
– DL Scrambling Code	Not present		RBSF-232
– HS-SCCH Channelisation Code Information			RBSF-233
– HS-SCCH Channelisation Code	2		RBSF-234
– Measurement Feedback Info			RBSF-235
– CHOICE mode	FDD		RBSF-236
– POhsdsch	6 dB		RBSF-237
– CQI Feedback cycle, k	2 ms		RBSF-238
– CQI repetition factor	1		RBSF-239
– CQI	5 (corresponds to 0dB in relative power offset)		RBSF-240
– CHOICE mode	FDD		RBSF-241
– Downlink 64QAM configured	Not Present	Rel-7	RBSF-242
Downlink information common for all radio links		Rel-6	RBSF-243
– Downlink F-DPCH info common for all RL			RBSF-244
– Timing Indication	Maintain		RBSF-245
– Timing maintained Synchronization indicator	FALSE		RBSF-246
– Downlink F-DPCH power control information			RBSF-247
– DPC mode	0 (single)		RBSF-248
– TPC command error rate target	0.04		RBSF-249
– CHOICE mode	FDD		RBSF-250
– DPCH compressed mode info	Not Present		RBSF-251
– TX Diversity mode	None		RBSF-252
– Default DPCH Offset Value	Not Present		RBSF-253
– MAC-hs reset indicator	Not Present		RBSF-254
Downlink information for each radio link list		Rel-6	RBSF-255
– Downlink information for each radio link			RBSF-256
– Choice mode	FDD		RBSF-257
– Primary CPICH info			RBSF-258
– Primary scrambling code	Ref. to clause 6.1 "Default settings (FDD)"		RBSF-259
– Serving HS-DSCH radio link indicator	TRUE		RBSF-260
– Downlink DPCH info for each RL	Not Present		RBSF-261
– Downlink F-DPCH info for each RL			RBSF-262
– Primary CPICH usage for channel estimation	Primary CPICH may be used		RBSF-263
– F-DPCH frame offset	Set to value Default DPCH Offset Value (as currently stored in SS) mod 38 400		RBSF-264
– Secondary CPICH info	Not Present		RBSF-265
– Secondary scrambling code	Not Present		RBSF-266
– Code number	6		RBSF-267
– TPC combination index	0		RBSF-268
MBMS PL Service Restriction Information	Not Present	Rel-6	RBSF-269

Contents of RADIO BEARER SETUP message: AM or UM (DC-HSDPA)

Information Element	Value/remark	Version	Index
Message Type			RBSD-001
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3		RBSD-002
Integrity check info			RBSD-003
– message authentication code	SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.		RBSD-004
– RRC message sequence number	SS provides the value of this IE, from its internal counter.		RBSD-005
Integrity protection mode info	Not Present		RBSD-006
Ciphering mode info	Not Present		RBSD-007
Activation time	Not Present		RBSD-008
New U-RNTI	Not Present		RBSD-009
New C-RNTI	Not Present		RBSD-010
New H-RNTI	‘1010 1010 1010 1010’	Rel-5	RBSD-011
New Primary E-RNTI	Not Present	Rel-6	RBSD-012
New Secondary E-RNTI	Not Present	Rel-6	RBSD-013
RRC State indicator	CELL_DCH		RBSD-014
UTRAN DRX cycle length coefficient	Not Present		RBSD-015
CN information info	Not Present		RBSD-016
URA identity	Not Present		RBSD-017
CHOICE specification mode	Complete specification	Rel-6	RBSD-018
Signalling RB information to setup	Not Present		RBSD-019
RAB information for setup list			RBSD-020
– RAB information for setup			RBSD-021
– RAB info	(high-speed UM DTCH for PS domain)		RBSD-022
– RAB identity	0000 0110B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.		RBSD-023
– CN domain identity	PS domain		RBSD-024
– NAS Synchronization Indicator	Not Present		RBSD-025
– Re-establishment timer	UseT315		RBSD-026
– RB information to setup			RBSD-027
– RB identity	25		RBSD-028
– PDCP info	Not Present		RBSD-029
– CHOICE RLC info type	RLC info		RBSD-030
– CHOICE Uplink RLC mode	Not Present		RBSD-031
– CHOICE Downlink RLC mode	UM RLC		RBSD-032
– DL UM RLC LI size	Selected with DL UM RLC data size	Rel-5	RBSD-033
– One sided RLC re-establishment	FALSE	Rel-5	RBSD-034
– RB mapping info			RBSD-035
– Information for each multiplexing option	1 RBMuxOptions		RBSD-036
– RLC logical channel mapping indicator	Not Present		RBSD-037
– Downlink RLC logical channel info			RBSD-038
– Number of downlink RLC logical channels	1		RBSD-039
– Downlink transport channel type	HS-DSCH		RBSD-040
– DL DCH Transport channel identity	Not Present		RBSD-041
– DL DSCH Transport channel identity	Not Present		RBSD-042
– CHOICE DL MAC header type	MAC-ehs	Rel-7	RBSD-043
– DL HS-DSCH MAC-ehs Queue Id	0		RBSD-044
– Logical channel identity	1		RBSD-045
RB information to reconfigure list	Not Present	Rel-6	RBSD-046
RB information to be affected list	Not Present		RBSD-047
Downlink counter synchronization info	Not Present		RBSD-048
PDCP ROHC target mode	Not Present	Rel-5	RBSD-049
UL Transport channel information for all transport channels			RBSD-050
– PRACH TFCS	Not Present		RBSD-051
– CHOICE mode	FDD		RBSD-052
– TFC subset	Not Present		RBSD-053
– UL DCH TFCS			RBSD-054
– CHOICE TFCI signalling	Normal		RBSD-055
– TFCI Field 1 information			RBSD-056
– CHOICE TFCS representation	Complete reconfiguration		RBSD-057
– TFCS complete reconfigure information			RBSD-058
– CHOICE CTFC Size	2 bit CTFC		RBSD-059
– CTFC information	4 TFCs		RBSD-060
– CTFC	Reference to clause TS 34.121 clause C.2.1 Parameter Set		RBSD-061
– Power offset information			RBSD-062
– CHOICE Gain Factors	Computed Gain Factors(The last TFC is set to Signalled Gain Factors)		RBSD-063
– Gain factor βc	8 (Not Present if the CHOICE Gain Factors is set to Computed Gain Factors)		RBSD-064
– Gain factor βd	15 (Not Present if the CHOICE Gain Factors is set to Computed Gain Factors)		RBSD-065
– Reference TFC ID	0		RBSD-066
– CHOICE mode	FDD		RBSD-067
– Power offset P p-m	Not Present		RBSD-068
Deleted UL TrCH information list	Not Present		RBSD-069
Added or Reconfigured TrCH information list	Not Present		RBSD-070
CHOICE mode	Not Present		RBSD-071
DL Transport channel information common for all transport channel			RBSD-072
– SCCPCH TFCS	Not Present		RBSD-073
– CHOICE mode	FDD		RBSD-074
– CHOICE DL parameters	Explicit		RBSD-075
– DL DCH TFCS			RBSD-076
– CHOICE TFCI Signalling	Normal		RBSD-077
– TFCI Field 1 Information			RBSD-078
– CHOICE TFCS representation	Complete reconfiguration		RBSD-079
– TFCS complete reconfigure			RBSD-080
– CHOICE CTFC Size	2 bit CTFC		RBSD-081
– CTFC information	4 TFCs		RBSD-082
– CTFC	Reference to clause TS 34.121 clause C.3.1 Parameter Set		RBSD-083
– Power offset information	Not Present		RBSD-084
Deleted DL TrCH information	Not Present		RBSD-085
Added or Reconfigured DL TrCH information list	1 TrCHs added		RBSD-086
– Added or Reconfigured DL TrCH information	(HS-DSCH for DTCH)		RBSD-087
– Downlink transport channel type	HS-DSCH	Rel-5	RBSD-088
– DL Transport channel identity	Not Present		RBSD-089
– CHOICE DL parameters	HS-DSCH		RBSD-090
– HARQ Info		Rel-5	RBSD-091
– Number of Processes	Reference to TS34.121 [2] Annex C Fixed Reference Channels		RBSD-092
– CHOICE Memory Partitioning	Explicit		RBSD-093
– Memory size	Reference to TS34.121 [2] Annex C Fixed Reference Channels parameter “Number of HARQ Processes”.		RBSD-094
– Process Memory Size	Reference to TS34.121 [2] Annex C Fixed Reference Channels parameter “Number of SML’s per HARQ Proc.”.		RBSD-095
– Additional memory sizes for MIMO	Not Present	Rel-7	RBSD-096
– CHOICE DL MAC header type	MAC-ehs	Rel-7	RBSD-097
– Added or reconfigured MAC-ehs reordering queue			RBSD-098
– MAC-ehs queue to add or reconfigure list	(one queue)	Rel-7	RBSD-099
– MAC-ehs queue Id	0		RBSD-100
– T1	50		RBSD-101
– Treset	Not Present		RBSD-102
– MAC-ehs window size	32		RBSD-103
– DCH quality target	Not present		RBSD-108
Frequency info	Not Present		RBSD-109
Multi-frequency Info	Not present	Rel-7	RBSD-110
DTX-DRX timing information	Not present	Rel-7	RBSD-111
DRX Information	Not present	Rel-7	RBSD-112
HS-SCCH less Information	Not present	Rel-7	RBSD-113
MIMO parameters	Not present	Rel-7	RBSD-114
Maximum allowed UL TX power	33dBm		RBSD-115
CHOICE channel requirement	Uplink DPCH info	Rel-5 and earlier	RBSD-116
Uplink DPCH info		Rel-6	RBSD-117
– Uplink DPCH power control info			RBSD-118
– CHOICE mode	FDD		RBSD-119
– DPCCH power offset	-40 (-80dB) IE value will have no effect on the UE UL power when closed loop power control is active		RBSD-120
– PC Preamble	1 frame		RBSD-121
– SRB delay	7 frames		RBSD-122
– Power Control Algorithm	Algorithm1		RBSD-123
– TPC step size	0 (1dB)		RBSD-124
– ACK	3	Rel-5	RBSD-125
– NACK	3	Rel-5	RBSD-126
– Ack-Nack repetition factor	1	Rel-5	RBSD-127
– CHOICE mode	FDD		RBSD-128
– Scrambling code type	Long		RBSD-129
– Scrambling code number	0 (0 to 16777215)		RBSD-130
– Number of DPDCH	Not Present (1)		RBSD-131
– spreading factor	64		RBSD-132
– TFCI existence	TRUE		RBSD-133
– Number of FBI bit	Not Present(0)		RBSD-134
– Puncturing Limit	1		RBSD-135
E-DCH Info	Not Present	Rel-6	RBSD-136
Downlink HS-PDSCH Information			RBSD-137
– HS-SCCH Info			RBSD-138
– CHOICE mode	FDD		RBSD-139
– DL Scrambling Code			RBSD-140
– HS-SCCH Channelisation Code Information			RBSD-141
– HS-SCCH Channelisation Code	2		RBSD-142
– HS-SCCH Channelisation Code	3		RBSD-143
– Measurement Feedback Info			RBSD-146
– CHOICE mode	FDD		RBSD-147
– Measurement Power Offset	6 dB	Rel-5	RBSD-148
– CQI Feedback cycle, k	2 ms	Rel-5	RBSD-149
– CQI repetition factor	1	Rel-5	RBSD-150
– CQI	5 (corresponds to 0dB in relative power offset)	Rel-5	RBSD-151
– CHOICE mode	FDD		RBSD-152
– Downlink 64QAM configured	Not Present	Rel-7	RBSD-153
– HS-DSCH TB size table	Not Present	Rel-7	RBSD-153b
Downlink information common for all radio links	Not Present		RBSD-154
Downlink information per radio link list			RBSD-155
– Downlink information for each radio link			RBSD-156
– CHOICE mode	FDD		RBSD-157
– Primary CPICH info			RBSD-158
– Primary scrambling code	Reference to clause 6.1 "Default settings (FDD)"		RBSD-159
– Serving HS-DSCH radio link indicator	TRUE	Rel-5	RBSD-160
– Downlink DPCH info for each RL			RBSD-161
– CHOICE mode	FDD		RBSD-162
– Primary CPICH usage for channel estimation	Primary CPICH may be used		RBSD-163
– DPCH frame offset	Set to value Default DPCH Offset Value (as currently stored in SS) mod 38 400		RBSD-164
– Secondary CPICH info	Not Present		RBSD-165
– DL channelisation code			RBSD-166
– Secondary scrambling code	Not present		RBSD-167
– Spreading factor	128		RBSD-168
– Code number	96		RBSD-169
– Scrambling code change	No change		RBSD-170
– TPC combination index	0		RBSD-171
– Closed loop timing adjustment mode	Not Present		RBSD-172
Downlink secondary cell info FDD		Rel-8	RBSD-173
– CHOICE Configuration info	New configuration		RBSD-174
– New H-RNTI	‘1010 1010 1010 1010’		RBSD-175
– Downlink 64QAM configured	Not Present		RBSD-176
– HS-DSCH TB size table	Not Present		RBSD-177
– Primary CPICH info			RBSD-178
– Primary scrambling code	Ref. to the Default setting in clause 6.1 (FDD)		RBSD-179
– DL Scrambling Code	Not Present		RBSD-180
– HS-SCCH Channelisation Code Information			RBSD-181
– HS-SCCH Channelisation Code	2		RBSD-182
– HS-SCCH Channelisation Code	3		RBSD-183
– Measurement Power Offset	6 dB		RBSD-184
– UARFCN downlink (Nd)	Reference to clause 5.1 Test frequencies		RBSD-185
MBMS PL Service Restriction Information	Not Present	Rel-6	RBSD-186

Contents of RADIO BEARER SETUP message: AM or UM (DC-HSUPA)

Information Element	Condition	Value/remark		Version		Index
Message Type						RBSE-001
RRC transaction identifier		Arbitrarily selects an integer between 0 and 3				RBSE-002
Integrity check info						RBSE-003
– message authentication code		SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.				RBSE-004
– RRC message sequence number		SS provides the value of this IE, from its internal counter.				RBSE-005
Integrity protection mode info		Not Present				RBSE-006
Ciphering mode info		Not Present				RBSE-007
New U-RNTI		Not Present				RBSE-008
New C-RNTI		Not Present				RBSE-009
New DSCH-RNTI		Not Present		R99 and Rel-4 only		RBSE-010
New H-RNTI		‘1010 1010 1010 1010’		Rel-5		RBSE-011
New Primary E-RNTI		‘1010 1010 1010 1010’		Rel-6		RBSE-012
New Secondary E-RNTI		Not Present		Rel-6		RBSE-013
RRC State indicator		CELL_DCH				RBSE-014
UTRAN DRX cycle length coefficient		Not Present				RBSE-015
CN information info		Not Present				RBSE-016
URA identity		Not Present				RBSE-017
CHOICE specification mode		Complete specification		Rel-6		RBSE-018
– Signalling RB information to setup		Not Present				RBSE-019
– RAB information for setup list						RBSE-020
– RAB information for setup						RBSE-021
– RAB info		(high-speed UM DTCH for PS domain)				RBSE-022
– RAB identity		0000 0110B The first/ leftmost bit of the bit string contains the most significant bit of the RAB identity.				RBSE-023
– CN domain identity		PS domain				RBSE-024
– NAS Synchronization Indicator		Not Present				RBSE-025
– Re-establishment timer		useT315				RBSE-026
– RB information to setup						RBSE-027
– RB identity		25				RBSE-028
– PDCP info		Not present				RBSE-029
– CHOICE RLC info type		RLC info				RBSE-030
– CHOICE Uplink RLC mode		UM RLC				RBSE-031
– Transmission RLC discard		Not present				RBSE-032
– CHOICE Downlink RLC mode		UM RLC				RBSE-033
– DL UM RLC LI size		Selected with DL UM RLC data size		Rel-5		RBSE-034
– DL Reception Window Size		Not present		Rel-6		RBSE-035
– One sided RLC re-establishment		FALSE				RBSE-036
– Alternative E-bit interpretation		Not present		Rel-6		RBSE-037
– RB mapping info						RBSE-038
– Information for each multiplexing option		1 RBMuxOptions				RBSE-039
– RLC logical channel mapping indicator		Not Present				RBSE-040
– Number of uplink RLC logical channels		1				RBSE-041
– Uplink transport channel type		E-DCH				RBSE-042
– Logical channel identity		7				RBSE-043
– E-DCH MAC-d flow identity		2				RBSE-044
– DDI		5				RBSE-045
– RLC PDU size list		1 RLC PDU size				RBSE-046
– RLC PDU size		336 bits				RBSE-047
– Include in scheduling info		TRUE				RBSE-048
– MAC logical channel priority		8				RBSE-049
– Downlink RLC logical channel info						RBSE-050
– Number of downlink RLC logical channels		1				RBSE-051
– Downlink transport channel type		HS-DSCH				RBSE-052
– DL DCH Transport channel identity		Not Present				RBSE-053
– DL DSCH Transport channel identity		Not Present				RBSE-054
– CHOICE DL MAC header type		MAC-ehs		Rel-7		RBSE-055
– DL HS-DSCH MAC-d flow identity		0				RBSE-056
– Logical channel identity		Not Present				RBSE-057
RB information to reconfigure list		Not Present		Rel-6		RBSE-058
RB information to be affected						RBSE-059
– RB identity		1 (UM DCCH for RRC)				RBSE-060
– RB mapping info						RBSE-061
– Information for each multiplexing option		1 RBMuxOption				RBSE-062
– RLC logical channel mapping indicator		Not Present				RBSE-063
– Number of uplink RLC logical channels		1				RBSE-064
– Uplink transport channel type		E-DCH				RBSE-065
– Logical channel identity		1				RBSE-066
– E-DCH MAC-d flow identity		1				RBSE-067
– DDI		1				RBSE-068
– RLC PDU size list		1 RLC PDU size				RBSE-069
– RLC PDU size		96 bits				RBSE-070
– Include in scheduling info		FALSE				RBSE-071
– MAC logical channel priority		1				RBSE-072
– Downlink RLC logical channel info						RBSE-073
– Number of RLC logical channels		1				RBSE-074
– Downlink transport channel type		DCH				RBSE-075
– DL DCH Transport channel identity		10				RBSE-076
– DL DSCH Transport channel identity		Not Present				RBSE-077
– Logical channel identity		1				RBSE-078
– RB identity		2 (AM DCCH for RRC)				RBSE-079
– RB mapping info						RBSE-080
– Information for each multiplexing option		1 RBMuxOption				RBSE-081
– RLC logical channel mapping indicator		Not Present				RBSE-082
– Number of uplink RLC logical channels		1				RBSE-083
– Uplink transport channel type		E-DCH				RBSE-084
– Logical channel identity		2				RBSE-085
– E-DCH MAC-d flow identity		1				RBSE-086
– DDI		2				RBSE-087
– RLC PDU size list		1 RLC PDU size				RBSE-088
– RLC PDU size		96 bits				RBSE-089
– Include in scheduling info		FALSE				RBSE-090
– MAC logical channel priority		2				RBSE-091
– Downlink RLC logical channel info						RBSE-092
– Number of RLC logical channels		1				RBSE-093
– Downlink transport channel type		DCH				RBSE-094
– DL DCH Transport channel identity		10				RBSE-095
– DL DSCH Transport channel identity		Not Present				RBSE-096
– Logical channel identity		2				RBSE-097
– RB identity		3 (AM DCCH for NAS High Priority)				RBSE-098
– RB mapping info						RBSE-099
– Information for each multiplexing option		1 RBMuxOption				RBSE-100
– RLC logical channel mapping indicator		Not Present				RBSE-101
– Number of uplink RLC logical channels		1				RBSE-102
– Uplink transport channel type		E-DCH				RBSE-103
– Logical channel identity		3				RBSE-104
– E-DCH MAC-d flow identity		1				RBSE-105
– DDI		3				RBSE-106
– RLC PDU size list		1 RLC PDU size				RBSE-107
– RLC PDU size		96 bits				RBSE-108
– Include in scheduling info		FALSE				RBSE-109
– MAC logical channel priority		3				RBSE-110
– Downlink RLC logical channel info						RBSE-111
– Number of RLC logical channels		1				RBSE-112
– Downlink transport channel type		DCH				RBSE-113
– DL DCH Transport channel identity		10				RBSE-114
– DL DSCH Transport channel identity		Not Present				RBSE-115
– Logical channel identity		3				RBSE-116
– RB identity		4 (AM DCCH for NAS Low Priority)				RBSE-117
– RB mapping info						RBSE-118
– Information for each multiplexing option		1 RBMuxOption				RBSE-119
– RLC logical channel mapping indicator		Not Present				RBSE-120
– Number of uplink RLC logical channels		1				RBSE-121
– Uplink transport channel type		E-DCH				RBSE-122
– Logical channel identity		4				RBSE-123
– E-DCH MAC-d flow identity		1				RBSE-124
– DDI		4				RBSE-125
– RLC PDU size list		1 RLC PDU size				RBSE-126
– RLC PDU size		96 bits				RBSE-127
– Include in scheduling info		FALSE				RBSE-128
– MAC logical channel priority		4				RBSE-129
– Downlink RLC logical channel info						RBSE-130
– Number of RLC logical channels		1				RBSE-131
– Downlink transport channel type		DCH				RBSE-132
– DL DCH Transport channel identity		10				RBSE-133
– DL DSCH Transport channel identity		Not Present				RBSE-134
– Logical channel identity		4				RBSE-135
Downlink counter synchronization info		Not Present				RBSE-136
PDCP ROHC target mode		Not Present		Rel-5		RBSE-137
UL Transport channel information for all transport channels		Not Present				RBSE-138
Deleted UL TrCH information						RBSE-139
– Uplink transport channel type		DCH				RBSE-140
– UL transport channel identity		5				RBSE-141
Added or Reconfigured UL TrCH information list		1 TrCH added				RBSE-142
– Added or Reconfigured UL TrCH information		1 E-DCH added with one DCCH MAC-d flow and one DTCH MAC-d flow				RBSE-143
– Uplink transport channel type		E-DCH				RBSE-144
– CHOICE UL parameters		E-DCH				RBSE-145
– UL MAC header type		MAC-i/is		Rel-8		RBSE-145a
– E-DCH Transmission Time Interval		2ms				RBSE-146
– HARQ info for E-DCH						RBSE-147
– HARQ RV Configuration		Rv0				RBSE-148
– Added or reconfigured E-DCH MAC-d flow		(for DCCH)				RBSE-149
– E-DCH MAC-d flow identity		1				RBSE-150
– E-DCH MAC-d flow power offset		0				RBSE-151
– E-DCH MAC-d flow maximum number of retransmissions		7				RBSE-152
– E-DCH MAC-d flow multiplexing list		Not Present				RBSE-153
– CHOICE transmission grant type		Non-scheduled grant info				RBSE-154
– Max MAC-e PDU contents size		114 bits				RBSE-155
– 2 ms non-scheduled transmission grant HARQ process allocation		Not Present				RBSE-156
– Added or reconfigured E-DCH MAC-d flow		(for DTCH)				RBSE-157
– E-DCH MAC-d flow identity		2				RBSE-158
– E-DCH MAC-d flow power offset		0				RBSE-159
– E-DCH MAC-d flow maximum number of retransmissions		7				RBSE-160
– E-DCH MAC-d flow multiplexing list		Not Present				RBSE-161
– CHOICE transmission grant type		Scheduled grant info				RBSE-162
CHOICE mode		Not Present		R99 and Rel-4 only		RBSE-163
DL Transport channel information common for all transport channels		Not Present				RBSE-164
DL Transport channel information common for all transport channels						RBSE-165
– SCCPCH TFCS		Not Present				RBSE-166
– CHOICE mode		FDD				RBSE-167
– CHOICE DL parameters		Explicit				RBSE-168
– DL DCH TFCS						RBSE-169
– CHOICE TFCI Signalling		Normal				RBSE-170
– TFCI Field 1 Information						RBSE-171
– CHOICE TFCS representation		Complete reconfiguration				RBSE-172
– TFCS complete reconfigure						RBSE-173
– CHOICE CTFC Size		2 bit CTFC				RBSE-174
– CTFC information		2 TFCs				RBSE-175
– 2bit CTFC		0				RBSE-176
– Power offset Information						RBSE-177
– CHOICE Gain Factors		computedGainFactors				RBSE-178
– Reference TFC ID		0				RBSE-179
– Power offset Pp-m		Not Present				RBSE-180
– 2bit CTFC		1				RBSE-181
– Power offset Information						RBSE-182
– CHOICE Gain Factors		signalledGainFactors				RBSE-183
– CHOICE mode		FDD				RBSE-184
– Gain factor ßc		15				RBSE-185
– Gain factor ßd		15				RBSE-186
– Reference TFC ID		0				RBSE-187
– CHOICE mode		FDD				RBSE-188
– Power offset Pp-m		Not Present				RBSE-189
Deleted TrCH information list		Not Present				RBSE-190
Added or Reconfigured TrCH information list		1 TrCH added				RBSE-191
– Added or Reconfigured DL TrCH information		HS-DSCH for DTCH added				RBSE-192
– Downlink transport channel type		HS-DSCH				RBSE-193
– DL Transport channel identity		Not Present				RBSE-194
– CHOICE DL parameters		HS-DSCH				RBSE-195
– HARQ Info						RBSE-196
– Number of Processes		Reference to TS34.121 [2] Annex C Fixed Reference Channels				RBSE-197
– CHOICE Memory Partitioning		Explicit				RBSE-198
– Memory size		Reference to TS34.121 [2] Annex C Fixed Reference Channels parameter “Number of HARQ Processes".				RBSE-199
– Process Memory Size		Reference to TS34.121 [2] Annex C Fixed Reference Channels parameter “Number of SML’s per HARQ Proc.”.				RBSE-200
– Additional memory sizes for MIMO		Not Present		Rel-7		RBSE-201
– CHOICE DL MAC header type		MAC-hs		Rel-7		RBSE-202
– Added or reconfigured MAC-d flow						RBSE-203
– MAC-hs queue to add or reconfigure list		(one queue)				RBSE-204
– MAC-hs queue Id		0				RBSE-205
– MAC-d Flow Identity		0				RBSE-206
– T1		50				RBSE-207
– MAC-hs window size		16				RBSE-208
– MAC-d PDU size Info						RBSE-209
– MAC-d PDU size		Reference to TS34.121 [2] Annex C Fixed Reference Channels				RBSE-210
– MAC-d PDU size index		0				RBSE-211
– MAC-hs queue to delete list		Not present				RBSE-212
– DCH quality target		Not present				RBSE-213
Frequency info		Not present				RBSE-214
Multi-frequency Info		Not present		Rel-7		RBSE-215
DTX-DRX timing information		Not present		Rel-7		RBSE-216
DRX Information		Not present		Rel-7		RBSE-217
HS-SCCH less Information		Not present		Rel-7		RBSE-218
MIMO parameters		Not present		Rel-7		RBSE-219
Maximum allowed UL TX power		33dBm				RBSE-220
CHOICE channel requirement		Uplink DPCH info		Rel-5 and earlier		RBSE-221
Uplink DPCH info				Rel-6		RBSE-222
– Uplink DPCH power control info						RBSE-223
– DPCCH power offset		-40 (-80dB)				RBSE-224
– PC Preamble		1 frame				RBSE-225
– SRB delay		7 frames				RBSE-226
– Power Control Algorithm		Algorithm1				RBSE-227
– TPC step size		0 (1dB)				RBSE-228
– ACK	A1	0				RBSE-229
– ACK	A2	6				RBSE-229a
– NACK	A1	0				RBSE-230
– NACK	A2	6				RBSE-230a
– Ack-Nack repetition factor		1				RBSE-231
– HARQ_preamble_mode		0				RBSE-232
– Scrambling code type		Long				RBSE-233
– Scrambling code number		0 (0 to 16777215)				RBSE-234
– Number of DPDCH		0				RBSE-235
– spreading factor		Not present				RBSE-236
– TFCI existence		FALSE				RBSE-237
– Number of FBI bit		Not present				RBSE-238
– Puncturing Limit		Not present				RBSE-239
E-DCH info				Rel-6		RBSE-240
– MAC-es/e reset indicator		TRUE				RBSE-241
– E-DPCCH info						RBSE-242
– E-DPCCH/DPCCH power offset		0				RBSE-243
– Happy bit delay condition		100 ms				RBSE-244
– E-TFC Boost Info						RBSE-244a
– E-TFCI boost		67		Rel-7		RBSE-245
– Delta T2TP		5 (15 dB)				RBSE-245a
– E-DPDCH power interpolation		Not present		Rel-7		RBSE-246
– E-DPDCH info						RBSE-247
– E-TFCI table index	A1	0				RBSE-248
– E-TFCI table index	A2	1				RBSE-248a
– E-DCH minimum set E-TFCI		67				RBSE-249
– Reference E-TFCIs		2 E-TFCI				RBSE-250
– Reference E-TFCI		1				RBSE-251
– Reference E-TFCI PO		12				RBSE-252
– Reference E-TFCI		68				RBSE-252a
– Reference E-TFCI PO		19				RBSE-252b
– Minimum reduced E-DPDCH gain factor.	A1	30/15		Rel-8		RBSE-252c
– Minimum reduced E-DPDCH gain factor.	A2	84/15		Rel-8		RBSE-252d
– Maximum channelisation codes		2sf2and2sf4				RBSE-253
– PLnon-max		0.84				RBSE-254
– Scheduling Information Configuration						RBSE-255
– Periodicity for Scheduling Info – no grant		Not present				RBSE-256
– Periodicity for Scheduling Info – grant		Not present				RBSE-257
– Power Offset for Scheduling Info		0				RBSE-258
– 3-Index-Step Threshold		Not present				RBSE-259
– 2-Index-Step Threshold		Not present				RBSE-260
– Scheduled Transmission configuration						RBSE-261
– 2ms scheduled transmission grant HARQ process allocation		Not present				RBSE-262
– Serving Grant		Not present				RBSE-263
– UL 16QAM settings	A1	Not present		Rel-7		RBSE-264
– UL 16QAM settings	A2			Rel-7		RBSE-264a
– BetaEd gain E-AGCH table selection		1				RBSE-264b
CHOICE Mode		FDD		R99 and Rel-4 only		RBSE-265
– Downlink PDSCH information		Not Present		R99 and Rel-4 only		RBSE-266
Uplink secondary cell info FDD				Rel-9		RBSE-267
– Secondary serving E-DCH cell info						RBSE-268
– Primary E-RNTI		‘1010 1010 1010 1010’				RBSE-269
– Secondary E-RNTI		Not Present				RBSE-270
– Secondary E-DCH info common						RBSE-271
– Frequency info						RBSE-272
– UARFCN uplink (Nu)		Reference to clause 5.1 Test frequencies				RBSE-273
– UARFCN downlink (Nd)		Reference to clause 5.1 Test frequencies				RBSE-274
– Scrambling code type		Short				RBSE-275
– Scrambling code number		0				RBSE-276
– 2ms scheduled transmission grant HARQ process allocation		Not Present				RBSE-277
– Serving Grant						RBSE-278
– Primary/Secondary Grant Selector		Primary				RBSE-279
– Minimum reduced E-DPDCH gain factor	A1	30/15				RBSE-280
– Minimum reduced E-DPDCH gain factor	A2	84/15				RBSE-280a
– E-DCH minimum set E-TFCI		67				RBSE-281
– DPCCH Power offset for secondary UL frequency		0 dB				RBSE-282
– PC Preamble		0 frame				RBSE-283
– Downlink information per radio link list on secondary UL frequency						RBSE-284
– Downlink information for each radio link on secondary UL frequency		1				RBSE-285
– Primary CPICH info						RBSE-286
– Primary scrambling code		Ref. to the Default setting in clause 6.1 (FDD)				RBSE-287
– Cell ID		Not Present				RBSE-288
– Downlink F-DPCH info for each RL on secondary UL frequency						RBSE-289
– Downlink F-DPCH info for each RL						RBSE-290
– Primary CPICH usage for channel estimate						RBSE-291
– F-DPCH frame offset		Set to value Default DPCH Offset Value (as currently stored in SS) mod 38 400				RBSE-292
– F-DPCH slot format		3 if UE supports enhanced F-DPCH, otherwise Not Present				RBSE-293
– Secondary CPICH info		Not Present				RBSE-294
– Secondary scrambling code		Not Present				RBSE-295
– Code number		12				RBSE-296
– TPC combination index		0				RBSE-297
– STTD		FALSE				RBSE-298
– E-AGCH Info						RBSE-299
– E-AGCH Channelisation Code		10				RBSE-300
– E-HICH Info						RBSE-301
– Channelisation Code		4				RBSE-302
– Signature Sequence		1				RBSE-303
– E-RGCH Info						RBSE-304
– Signature Sequence		0				RBSE-305
– RG combination index		0				RBSE-306
Downlink HS-PDSCH Information						RBSE-307
– HS-SCCH Info						RBSE-308
– CHOICE mode		FDD				RBSE-309
– DL Scrambling Code		Not present				RBSE-310
– HS-SCCH Channelisation Code Information						RBSE-311
– HS-SCCH Channelisation Code		2				RBSE-312
– HS-SCCH Channelisation Code		3				RBSE-313
– Measurement Feedback Info						RBSE-314
– CHOICE mode		FDD				RBSE-315
– POhsdsch		6 dB				RBSE-316
– CQI Feedback cycle, k		2 ms				RBSE-317
– CQI repetition factor		1				RBSE-318
– CQI	A1	0				RBSE-319
– CQI	A2	6				RBSE-319a
– CHOICE mode		FDD				RBSE-320
– Downlink 64QAM configured		Not Present		Rel-7		RBSE-321
Downlink information common for all radio links		Not Present				RBSE-322
Downlink information for each radio link list						RBSE-323
– Downlink information for each radio link						RBSE-324
– Choice mode		FDD				RBSE-325
– Primary CPICH info						RBSE-326
– Primary scrambling code		Ref. to clause 6.1 "Default settings (FDD)"				RBSE-327
– PDSCH with SHO DCH info		Not Present		R99 and Rel-4 only		RBSE-328
– PDSCH code mapping		Not Present		R99 and Rel-4 only		RBSE-329
– Serving HS-DSCH radio link indicator		TRUE				RBSE-330
– Serving E-DCH radio link indicator		TRUE				RBSE-331
– Downlink DPCH info for each RL						RBSE-332
– CHOICE mode		FDD				RBSE-333
– Primary CPICH usage for channel estimation		Primary CPICH may be used				RBSE-334
– DPCH frame offset		Set to value Default DPCH Offset Value (as currently stored in SS) mod 38 400				RBSE-335
– Secondary CPICH info		Not Present				RBSE-336
– DL channelisation code						RBSE-337
– Secondary scrambling code		Not Present				RBSE-338
– Spreading factor		256				RBSE-339
– Code number		192				RBSE-340
– Scrambling code change		No code change				RBSE-341
– TPC combination index		0				RBSE-342
– SSDT Cell Identity		Not Present		R99 and Rel-4 only		RBSE-343
– Closed loop timing adjustment mode		Not Present				RBSE-344
– E-AGCH Info				Rel-6		RBSE-345
– E-AGCH Channelisation Code		14				RBSE-346
– CHOICE E-HICH Information				Rel-6		RBSE-347
– E-HICH Information						RBSE-348
– DL Scrambling code		Not Present (default is primary)				RBSE-349
– Channelisation code		6				RBSE-350
– Signature sequence		1				RBSE-351
– CHOICE E-RGCH Information		Not Present		Rel-6		RBSE-352
– SCCPCH information for FACH		Not Present		R99 and Rel-4 only		RBSE-353
Downlink secondary cell info FDD					Rel-8		RBSE-354
– CHOICE Configuration info			New configuration				RBSE-355
– New H-RNTI			‘1010 1010 1010 1010’				RBSE-356
– Downlink 64QAM configured			Not Present				RBSE-357
– HS-DSCH TB size table			Not Present				RBSE-358
– Primary CPICH info							RBSE-359
– Primary scrambling code			Ref. to the Default setting in clause 6.1 (FDD)				RBSE-360
– DL Scrambling Code			Not Present				RBSE-361
– HS-SCCH Channelisation Code Information							RBSE-362
– HS-SCCH Channelisation Code			2				RBSE-363
– HS-SCCH Channelisation Code			3				RBSE-364
– Measurement Power Offset			6 dB				RBSE-365
– UARFCN downlink (Nd)			Reference to clause 5.1 Test frequencies				RBSE-366
MBMS PL Service Restriction Information		Not Present		Rel-6		RBSE-367

Condition	Explanation	Version
A1	This IE is used when test is performed with UL E-DCH reference measurement channel for DC-HSUPA using BPSK as specified in TS 34.121-1 subclause C.2.6
A2	This IE is used when test is performed with UL E-DCH reference measurement channel for DC-HSUPA using 16QAM as specified in TS 34.121-1 subclause C.2.7

Contents of RRC CONNECTION RELEASE message: UM

Information Element	Value/remark	Version
Message Type
U-RNTI	This IE is set to the following value when the message is transmitted on the CCCH. When transmitted on DCCH, this is absent.	R99, Rel-4
– SRNC identity	0000 0000 0001B
– S-RNTI	0000 0000 0000 0000 0001B
CHOICE identity type	This IE is set to the following value when the message is transmitted on the CCCH. When transmitted on DCCH, this is absent.	Rel-5
– U-RNTI
– SRNC identity	0000 0000 0001B
– S-RNTI	0000 0000 0000 0000 0001B
RRC transaction identifier	Arbitrarily selects an integer between 0 and 3
Integrity check info	This IE is present when this message is transmitted on downlink DCCH. Else, this IE and the sub-IEs are omitted.
– Message authentication code	SS calculates the value of MAC-I for this message and writes to this IE. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.
– RRC Message sequence number	SS provides the value of this IE, from its internal counter.
N308	2 (for CELL_DCH state). Not Present (for UE in other connected mode states).
Release cause	Normal event
Rplmn information	Not Present
Redirection info	Not Present	Rel-6

Contents of RRC CONNECTION SETUP message: UM

Information Element	Condition	Value/remark	Version	Index
Message Type				RCSU-001
Initial UE identity		Select the same identity as in the IE "Initial UE Identity" in received "RRC CONNECTION REQUEST" message		RCSU-002
RRC transaction identifier		Arbitrarily selects an integer between 0 and 3		RCSU-003
Activation time		Not Present(Now)		RCSU-004
New U-RNTI				RCSU-005
– SRNC identity		0000 0000 0001B		RCSU-006
– S-RNTI		0000 0000 0000 0000 0001B		RCSU-007
New C-RNTI		Not Present		RCSU-008
New H-RNTI		Not Present	Rel-6	RCSU-009
New Primary E-RNTI		Not Present	Rel-6	RCSU-010
New Secondary E-RNTI		Not Present	Rel-6	RCSU-011
RRC State Indicator		CELL_DCH		RCSU-012
UTRAN DRX cycle length coefficient		9		RCSU-013
Capability update requirement				RCSU-014
– UE radio access FDD capability update requirement		TRUE		RCSU-015
– UE radio access TDD capability update requirement		FALSE		RCSU-016
– UE radio access 3.84 Mcps TDD capability update requirement		FALSE	Rel-4	RCSU-017
– UE radio access 1.28 Mcps TDD capability update requirement		FALSE	Rel-4	RCSU-018
– System specific capability update requirement list		1 entry (for Rel-7 and earlier) 2 entry (for Rel-8 and later)		RCSU-019
– System specific capability update requirement		GSM		RCSU-019a
– System specific capability update requirement		E-UTRA	Rel-8	RCSU-019b
CHOICE specification mode		Complete specification	Rel-5	RCSU-020
– Complete specification			Rel-5	RCSU-021
– Signalling RB information to setup list		4 SRBs		RCSU-022
– Signalling RB information to setup		(UM DCCH for RRC)		RCSU-023
– RB identity		Not Present		RCSU-024
– CHOICE RLC info type		RLC info		RCSU-025
– CHOICE Uplink RLC mode		UM RLC		RCSU-026
– Transmission RLC discard		Not Present		RCSU-027
– CHOICE Downlink RLC mode		UM RLC		RCSU-028
– DL UM RLC LI size		7 bit	Rel-6	RCSU-029
– One sided RLC re-establishment		FALSE	Rel-6	RCSU-030
– RB mapping info				RCSU-031
– Information for each multiplexing option		2 RBMuxOptions		RCSU-032
– RLC logical channel mapping indicator		Not Present		RCSU-033
– Number of RLC logical channels		1		RCSU-034
– Uplink transport channel type		DCH		RCSU-035
– UL Transport channel identity		5		RCSU-036
– Logical channel identity		1		RCSU-037
– CHOICE RLC size list		Configured		RCSU-038
– MAC logical channel priority		1		RCSU-039
– Downlink RLC logical channel info				RCSU-040
– Number of RLC logical channels		1		RCSU-041
– Downlink transport channel type		DCH		RCSU-042
– DL DCH Transport channel identity		10		RCSU-043
– DL DSCH Transport channel identity		Not Present		RCSU-044
– Logical channel identity		1		RCSU-045
– RLC logical channel mapping indicator		Not Present		RCSU-046
– Number of RLC logical channels		1		RCSU-047
– Uplink transport channel type		RACH		RCSU-048
– UL Transport channel identity		Not Present		RCSU-049
– Logical channel identity		1		RCSU-050
– CHOICE RLC size list		Explicit List		RCSU-051
– RLC size index		Reference to clause 6 Parameter Set		RCSU-052
– MAC logical channel priority		1		RCSU-053
– Downlink RLC logical channel info				RCSU-054
– Number of RLC logical channels		1		RCSU-055
– Downlink transport channel type		FACH		RCSU-056
– DL DCH Transport channel identity		Not Present		RCSU-057
– DL DSCH Transport channel identity		Not Present		RCSU-058
– Logical channel identity		1		RCSU-059
– Signalling RB information to setup		(AM DCCH for RRC)		RCSU-060
– RB identity		Not Present		RCSU-061
– CHOICE RLC info type				RCSU-062
– RLC info				RCSU-063
– CHOICE Uplink RLC mode		AM RLC		RCSU-064
– Transmission RLC discard				RCSU-065
– SDU discard mode		No Discard		RCSU-066
– MAX_DAT		15		RCSU-067
– Transmission window size		128		RCSU-068
– Timer_RST		500		RCSU-069
– Max_RST		1		RCSU-070
– Polling info				RCSU-071
– Timer_poll_prohibit		200		RCSU-072
– Timer_poll		200		RCSU-073
– Poll_PDU		Not Present		RCSU-074
– Poll_SDU		1		RCSU-075
– Last transmission PDU poll		TRUE		RCSU-076
– Last retransmission PDU poll		TRUE		RCSU-077
– Poll_Windows		99		RCSU-078
– Timer_poll_periodic		Not Present		RCSU-079
– CHOICE Downlink RLC mode		AM RLC		RCSU-080
– DL RLC PDU size		96 bits	Rel-6	RCSU-081
– DL RLC PDU size	A1	144 bits	Rel-6	RCSU-082
– In-sequence delivery		TRUE		RCSU-083
– Receiving window size		128		RCSU-084
– Downlink RLC status info				RCSU-085
– Timer_status_prohibit		200		RCSU-086
– Timer_EPC		Not Present		RCSU-087
– Missing PDU indicator		TRUE		RCSU-088
– Timer_STATUS_periodic		Not Present		RCSU-089
– RB mapping info				RCSU-090
– Information for each multiplexing option		2 RBMuxOptions		RCSU-091
– RLC logical channel mapping indicator		Not Present		RCSU-092
– Number of RLC logical channels		1		RCSU-093
– Uplink transport channel type		DCH		RCSU-094
– UL Transport channel identity		5		RCSU-095
– Logical channel identity		2		RCSU-096
– CHOICE RLC size list		Configured		RCSU-097
– MAC logical channel priority		2		RCSU-098
– Downlink RLC logical channel info				RCSU-099
– Number of RLC logical channels		1		RCSU-100
– Downlink transport channel type		DCH		RCSU-101
– DL DCH Transport channel identity		10		RCSU-102
– DL DSCH Transport channel identity		Not Present		RCSU-103
– Logical channel identity		2		RCSU-104
– RLC logical channel mapping indicator		Not Present		RCSU-105
– Number of RLC logical channels		1		RCSU-106
– Uplink transport channel type		RACH		RCSU-107
– UL Transport channel identity		Not Present		RCSU-108
– Logical channel identity		2		RCSU-109
– CHOICE RLC size list		Explicit List		RCSU-110
– RLC size index		Reference to clause 6 Parameter Set		RCSU-111
– MAC logical channel priority		2		RCSU-112
– Downlink RLC logical channel info				RCSU-113
– Number of RLC logical channels		1		RCSU-114
– Downlink transport channel type		FACH		RCSU-115
– DL DCH Transport channel identity		Not Present		RCSU-116
– DL DSCH Transport channel identity		Not Present		RCSU-117
– Logical channel identity		2		RCSU-118
– Signalling RB information to setup		(AM DCCH for NAS_DT High priority)		RCSU-119
– RB identity		Not Present		RCSU-120
– CHOICE RLC info type				RCSU-121
– RLC info				RCSU-122
– CHOICE Uplink RLC mode		AM RLC		RCSU-123
– Transmission RLC discard				RCSU-124
– SDU discard mode		No Discard		RCSU-125
– MAX_DAT		15		RCSU-126
– Transmission window size		128		RCSU-127
– Timer_RST		500		RCSU-128
– Max_RST		1		RCSU-129
– Polling info				RCSU-130
– Timer_poll_prohibit		200		RCSU-131
– Timer_poll		200		RCSU-132
– Poll_PDU		Not Present		RCSU-133
– Poll_SDU		1		RCSU-134
– Last transmission PDU poll		TRUE		RCSU-135
– Last retransmission PDU poll		TRUE		RCSU-136
– Poll_Windows		99		RCSU-137
– Timer_poll_periodic		Not Present		RCSU-138
– CHOICE Downlink RLC mode		AM RLC		RCSU-139
– DL RLC PDU size		96 bits	Rel-6	RCSU-140
– DL RLC PDU size	A1	144 bits	Rel-6	RCSU-141
– In-sequence delivery		TRUE		RCSU-142
– Receiving window size		128		RCSU-143
– Downlink RLC status info				RCSU-144
– Timer_status_prohibit		200		RCSU-145
– Timer_EPC		Not Present		RCSU-146
– Missing PDU indicator		TRUE		RCSU-147
– Timer_STATUS_periodic		Not Present		RCSU-148
– RB mapping info				RCSU-149
– Information for each multiplexing option		2 RBMuxOptions		RCSU-150
– RLC logical channel mapping indicator		Not Present		RCSU-151
– Number of RLC logical channels		1		RCSU-152
– Uplink transport channel type		DCH		RCSU-153
-UL Transport channel identity		5		RCSU-154
– Logical channel identity		3		RCSU-155
– CHOICE RLC size list		Configured		RCSU-156
– MAC logical channel priority		3		RCSU-157
– Downlink RLC logical channel info				RCSU-158
– Number of RLC logical channels		1		RCSU-159
– Downlink transport channel type		DCH		RCSU-160
– DL DCH Transport channel identity		10		RCSU-161
– DL DSCH Transport channel identity		Not Present		RCSU-162
– Logical channel identity		3		RCSU-163
– RLC logical channel mapping indicator		Not Present		RCSU-164
– Number of RLC logical channels		1		RCSU-165
– Uplink transport channel type		RACH		RCSU-166
– UL Transport channel identity		Not Present		RCSU-167
– Logical channel identity		3		RCSU-168
– CHOICE RLC size list		Explicit List		RCSU-169
– RLC size index		Reference to clause 6 Parameter Set		RCSU-170
– MAC logical channel priority		3		RCSU-171
– Downlink RLC logical channel info				RCSU-172
– Number of RLC logical channels		1		RCSU-173
– Downlink transport channel type		FACH		RCSU-174
– DL DCH Transport channel identity		Not Present		RCSU-175
– DL DSCH Transport channel identity		Not Present		RCSU-176
– Logical channel identity		3		RCSU-177
– Signalling RB information to setup		(AM DCCH for NAS_DT Low priority)		RCSU-178
– RB identity		Not Present		RCSU-179
– CHOICE RLC info type				RCSU-180
– RLC info				RCSU-181
– CHOICE Uplink RLC mode		AM RLC		RCSU-182
– Transmission RLC discard				RCSU-183
– SDU discard mode		No Discard		RCSU-184
– MAX_DAT		15		RCSU-185
– Transmission window size		128		RCSU-186
– Timer_RST		500		RCSU-187
– Max_RST		1		RCSU-188
– Polling info				RCSU-189
– Timer_poll_prohibit		200		RCSU-190
– Timer_poll		200		RCSU-191
– Poll_PDU		Not Present		RCSU-192
– Poll_SDU		1		RCSU-193
– Last transmission PDU poll		TRUE		RCSU-194
– Last retransmission PDU poll		TRUE		RCSU-195
– Poll_Windows		99		RCSU-196
– Timer_poll_periodic		Not Present		RCSU-197
– CHOICE Downlink RLC mode		AM RLC		RCSU-198
– DL RLC PDU size		96 bits	Rel-6	RCSU-199
– DL RLC PDU size	A1	144 bits	Rel-6	RCSU-200
– In-sequence delivery		TRUE		RCSU-201
– Receiving window size		128		RCSU-202
– Downlink RLC status info				RCSU-203
– Timer_status_prohibit		200		RCSU-204
– Timer_EPC		Not Present		RCSU-205
– Missing PDU indicator		TRUE		RCSU-206
– Timer_STATUS_periodic		Not Present		RCSU-207
– RB mapping info				RCSU-208
– Information for each multiplexing option		2 RBMuxOptions		RCSU-209
– RLC logical channel mapping indicator		Not Present		RCSU-210
– Number of RLC logical channels		1		RCSU-211
– Uplink transport channel type		DCH		RCSU-212
– UL Transport channel identity		5		RCSU-213
– Logical channel identity		4		RCSU-214
– CHOICE RLC size list		Configured		RCSU-215
– MAC logical channel priority		4		RCSU-216
– Downlink RLC logical channel info				RCSU-217
– Number of RLC logical channels		1		RCSU-218
– Downlink transport channel type		DCH		RCSU-219
– DL DCH Transport channel identity		10		RCSU-220
– DL DSCH Transport channel identity		Not Present		RCSU-221
– Logical channel identity		4		RCSU-222
– RLC logical channel mapping indicator		Not Present		RCSU-223
– Number of RLC logical channels		1		RCSU-224
– Uplink transport channel type		RACH		RCSU-225
– UL Transport channel identity		Not Present		RCSU-226
– Logical channel identity		4		RCSU-227
– CHOICE RLC size list		Explicit List		RCSU-228
– RLC size index		Reference to clause 6 Parameter Set		RCSU-229
– MAC logical channel priority		4		RCSU-230
– Downlink RLC logical channel info				RCSU-231
– Number of RLC logical channels		1		RCSU-232
– Downlink transport channel type		FACH		RCSU-233
– DL DCH Transport channel identity		Not Present		RCSU-234
– DL DSCH Transport channel identity		Not Present		RCSU-235
– Logical channel identity		4		RCSU-236
UL Transport channel information for all transport channels				RCSU-237
– PRACH TFCS		Not Present		RCSU-238
– CHOICE Mode		FDD		RCSU-239
– TFC subset		Not Present		RCSU-240
– UL DCH TFCS				RCSU-241
– CHOICE TFCI signalling		Normal		RCSU-242
– TFCI Field 1 information				RCSU-243
– CHOICE TFCS representation		Complete reconfiguration		RCSU-244
– TFCS complete reconfiguration information				RCSU-245
– CHOICE CTFC Size		2 bit CTFC		RCSU-246
– CTFC information		2 TFCs		RCSU-247
– 2bit CTFC		0		RCSU-248
– Power offset Information				RCSU-249
– CHOICE Gain Factors		computedGainFactors		RCSU-250
– Reference TFC ID		0		RCSU-251
– CHOICE mode		FDD		RCSU-252
– Power offset Pp-m		Not Present		RCSU-253
– 2bit CTFC		1		RCSU-254
– Power offset Information				RCSU-255
– CHOICE Gain Factors		signalledGainFactors		RCSU-256
– CHOICE mode		FDD		RCSU-257
– Gain factor ßc		15		RCSU-258
– Gain factor ßd		15		RCSU-259
– Reference TFC ID		0		RCSU-260
– CHOICE mode		FDD		RCSU-261
– Power offset Pp-m		Not Present		RCSU-262
Added or Reconfigured UL TrCH information list		1		RCSU-263
– Added or Reconfigured UL TrCH information				RCSU-264
– Uplink transport channel type		DCH		RCSU-265
– UL Transport channel identity		5		RCSU-266
– TFS				RCSU-267
– CHOICE Transport channel type		Dedicated transport channels		RCSU-268
– Dynamic Transport Format Information				RCSU-269
– RLC size		96 bits		RCSU-270
– RLC size	A1	144 bits		RCSU-271
– Number of TBs and TTI List		2		RCSU-272
– Transmission Time Interval		Not Present		RCSU-273
– Number of Transport blocks		0		RCSU-274
– Transmission Time Interval		Not Present		RCSU-275
– Number of Transport blocks		1		RCSU-276
– CHOICE Logical channel List		ALL		RCSU-277
– Semi-static Transport Format Information				RCSU-278
– Transmission time interval		40		RCSU-279
– Type of channel coding		Convolutional		RCSU-280
– Coding Rate		1/3		RCSU-281
– Rate matching attribute		256		RCSU-282
– CRC size		12		RCSU-283
– CRC size	A1	16		RCSU-284
DL Transport channel information common for all transport channel				RCSU-285
– SCCPCH TFCS		Not Present		RCSU-286
– CHOICE mode		FDD		RCSU-287
– CHOICE DL parameters		Same as UL		RCSU-288
Added or Reconfigured DL TrCH information list		1		RCSU-289
– Added or Reconfigured DL TrCH information				RCSU-290
– Downlink transport channel type		DCH		RCSU-291
– DL Transport channel identity		10		RCSU-292
– CHOICE DL parameters		SameAasUL		RCSU-293
– Uplink transport channel type		DCH		RCSU-294
– UL TrCH Identity		5		RCSU-295
– DCH quality target				RCSU-296
– BLER Quality value		-20 (-2.0)		RCSU-297
Frequency info		Not Present		RCSU-298
Maximum allowed UL TX power		Not Present		RCSU-299
CHOICE channel requirement		Uplink DPCH info	Rel-5 and earlier	RCSU-300
Uplink DPCH info			Rel-6	RCSU-301
– Uplink DPCH power control info				RCSU-302
– DPCCH power offset		-40 (-80dB)		RCSU-303
– PC Preamble		1 frame		RCSU-304
– SRB delay		7 frames		RCSU-305
– Power Control Algorithm		Algorithm1		RCSU-306
– TPC step size		0 (1dB)		RCSU-307
– ACK		Not Present	Rel-5	RCSU-308
– NACK		Not Present	Rel-5	RCSU-309
– Ack-Nack repetition factor		Not Present	Rel-5	RCSU-310
– HARQ_preamble_mode		0	Rel-6	RCSU-311
– CHOICE mode		FDD		RCSU-312
– Scrambling code type		Long		RCSU-313
– Scrambling code number		0 (0 to 16777215)		RCSU-314
– Number of DPDCH		Not Present (1)		RCSU-315
– Spreading factor		256		RCSU-316
– TFCI existence		TRUE		RCSU-317
– Number of FBI bit		Not Present(0)		RCSU-318
– Puncturing Limit		1		RCSU-319
E-DCH Info		Not Present	Rel-6	RCSU-320
Downlink HS-PDSCH Information		Not Present	Rel-6	RCSU-321
Downlink information common for all radio links				RCSU-322
– Downlink DPCH info common for all RL				RCSU-323
– Timing Indication		Initialize		RCSU-324
– CFN-targetSFN frame offset		Not Present		RCSU-325
– Downlink DPCH power control information				RCSU-326
– CHOICE mode		FDD		RCSU-327
– DPC mode		0 (single)		RCSU-328
– CHOICE mode		FDD		RCSU-329
– Power offset P Pilot-DPDCH		0		RCSU-330
– DL rate matching restriction information		Not Present		RCSU-331
– Spreading factor		256		RCSU-332
– Fixed or Flexible Position		Fixed		RCSU-333
– TFCI existence		FALSE		RCSU-334
– CHOICE SF				RCSU-335
– Number of bits for Pilot bits		8		RCSU-336
– DPCH compressed mode info		Not Present		RCSU-337
– TX Diversity mode		None		RCSU-338
– SSDT information		Not Present	R99 and Rel-4 only	RCSU-339
– Default DPCH Offset Value		Arbitrary set to value 0..306688 by step of 512		RCSU-340
Downlink information for per radio links list				RCSU-341
-Downlink information for each radio links				RCSU-342
– CHOICE mode		FDD		RCSU-343
– Primary CPICH info				RCSU-344
– Primary scrambling code		Reference to clause 6.1 "Default settings (FDD)"		RCSU-345
– PDSCH with SHO DCH info		Not Present	R99 and Rel-4 only	RCSU-346
– PDSCH code mapping		Not Present	R99 and Rel-4 only	RCSU-347
– Serving HS-DSCH radio link indicator		FALSE	Rel-6	RCSU-348
– Serving E-DCH radio link indicator		FALSE	Rel-6	RCSU-349
– Downlink DPCH info for each RL				RCSU-350
– CHOICE mode		FDD		RCSU-351
– Primary CPICH usage for channel estimation		Primary CPICH may be used		RCSU-352
– DPCH frame offset		Set to value : Default DPCH Offset Value mod 38 400		RCSU-353
– Secondary CPICH info		Not Present		RCSU-354
– DL channelisation code				RCSU-355
– Secondary scrambling code		Not Present		RCSU-356
– Spreading factor		256		RCSU-357
– Code number		192		RCSU-358
– Scrambling code change		Not Present		RCSU-359
– TPC combination index		0		RCSU-360
– SSDT Cell Identity		Not Present	R99 and Rel-4 only	RCSU-361
– Closed loop timing adjustment mode		Not Present		RCSU-362
– E-AGCH Info		Not Present	Rel-6	RCSU-363
– E-HICH Information		Not Present	Rel-6	RCSU-364
– E-RGCH Information		Not Present	Rel-6	RCSU-365
– SCCPCH information for FACH		Not Present	R99 and Rel-4 only	RCSU-366

Condition	Explanation
A1	UE supporting 64kbps(Chanel2)

Contents of SECURITY MODE COMMAND message: AM

Information Element	Condition	Value/remark
Message Type	A1, A2
RRC transaction identifier		Arbitrarily selects an integer between 0 and 3
Integrity check info
– Message authentication code		Set to an arbitrarily selected 32-bits integer. The first/ leftmost bit of the bit string contains the most significant bit of the MAC-I.
– RRC Message Sequence Number		Set to an arbitrarily selected integer between 0 and 15
Security capability
– Ciphering algorithm capability
– UEA0		If the UE has indicated support for ciphering algorithm UEA0 in the IE "security capability" in the RRC CONNECTION SETUP COMPLETE message, this IE is set to TRUE.
– UEA1		If the UE has indicated support for ciphering algorithm UEA1 in the IE "security capability" in the RRC CONNECTION SETUP COMPLETE message, this IE is set to TRUE.
– Spare		Spare 2-15 = FALSE
– Integrity protection algorithm capability		0000000000000010B (UIA1)
– UIA1		TRUE
– Spare		Spare 0 and Spare 2-15 = FALSE
Ciphering mode info		This presence of this IE is dependent on IXIT statements in TS 34.123-2. If ciphering is indicated to be active, this IE present with the values of the sub IEs as stated below. Else, this IE is omitted.
– Ciphering mode command		Start/restart
– Ciphering algorithm		UEA0 or UEA1. The indicated algorithm must be one of the algorithms supported by the UE as indicated in the IE "security capability" in the RRC CONNECTION SETUP COMPLETE message.
– Ciphering activation time for DPCH		Not Present
– Radio bearer downlink ciphering activation time info
– Radio bearer activation time
– RB identity		1
– RLC sequence number		Current RLC SN
– RB identity		2
– RLC sequence number		Current RLC SN+3(or Calculated Value)
– RB identity		3
– RLC sequence number		Current RLC SN
– RB identity		4
– RLC sequence number		Current RLC SN
Integrity protection mode info
– Integrity protection mode command		Start
– Downlink integrity protection activation info		Not Present
– Integrity protection algorithm		UIA1
– Integrity protection initialisation number		SS selects an arbitrary 32 bits number for FRESH. The first/ leftmost bit of the bit string contains the most significant bit of the FRESH.A1
CN domain identity		CS or PS
UE system specific security capability	A1	Not Present
UE system specific security capability	A2
– Inter-RAT UE security capability
– CHOICE system		GSM
– GSM security capability		The indicated algorithms must be the same as the algorithms supported by the UE as indicated in the IE " UE system specific capability " in the RRC CONNECTION SETUP COMPLETE message.

Condition	Explanation
A1	UE not supporting GSM
A2	UE supporting GSM